COM21-HCXOC3-MIB: View SNMP OID List / Download MIB

VENDOR: COM21


 Home MIB: COM21-HCXOC3-MIB
Download as:   
SNMPv2-CONF, COM21-HCX-MIB, COM21-HCXALM-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 com21HcxOc3 1.3.6.1.4.1.1141.2.90
This is the Com21 ComController Oc3 MIB module. COM21 Part# 005-0025-00
 com21HcxOc3UnitGroup 1.3.6.1.4.1.1141.2.91
       com21HcxOc3UnitTable 1.3.6.1.4.1.1141.2.91.1 no-access
.
           com21HcxOc3UnitEntry 1.3.6.1.4.1.1141.2.91.1.1 no-access
.
               hcxOc3UnitShelfId 1.3.6.1.4.1.1141.2.91.1.1.1 integer read-only
contains the associated shelf id.
               hcxOc3UnitSlotId 1.3.6.1.4.1.1141.2.91.1.1.2 integer32 read-only
contains associated slot id.
               hcxOc3HardwareVersion 1.3.6.1.4.1.1141.2.91.1.1.3 displaystring read-only
contains the hardware version of the Oc3 card. Will contain empty string if card has not been inserted in the slot.
               hcxOc3BootVersion 1.3.6.1.4.1.1141.2.91.1.1.4 displaystring read-only
contains the version of the Oc3 card boot ROM. Will contain empty string if card has not been inserted in the slot.
               hcxOc3UnitPrimServState 1.3.6.1.4.1.1141.2.91.1.1.5 primservicestate read-only
contains primary service state of the Oc3 Unit.
               hcxOc3UnitSecServState 1.3.6.1.4.1.1141.2.91.1.1.6 displaystring read-only
contains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: UNEQ - unequipped.
               hcxOc3RestartAction 1.3.6.1.4.1.1141.2.91.1.1.7 integer read-write
The Oc3 Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 card to reset and download a new image. Enumeration: 'restart': 2, 'nil': 1.
               hcxOc3TestStatusLed 1.3.6.1.4.1.1141.2.91.1.1.8 integer read-only
The Oc3 Test Status LED is a read-only attribute which describes the condition of the Oc3 Test Status light emitting diode located on the Oc3 board. A value of on(1) indicates that a service effecting test is in progress and that the LED is illuminated. Will be off if no card present. Enumeration: 'on': 1, 'off': 2.
               hcxOc3FaultStatusLed 1.3.6.1.4.1.1141.2.91.1.1.9 integer read-only
The Oc3 Fault Status LED is a read-only attribute which describes the condition of the Oc3 Fault Status light emitting diode located on the Oc3 board. A value of on(1) indicates that an fault condition has been detected (for which a trap will have been issued) and the LED is illuminated. Will be off if no card present. Enumeration: 'on': 1, 'off': 2.
               hcxOc3SerialNumber 1.3.6.1.4.1.1141.2.91.1.1.10 displaystring read-only
contains the serial number of the Oc3 card. Will contain empty string if card has not been inserted in the slot.
               hcxOc3SyncClkConfigure 1.3.6.1.4.1.1141.2.91.1.1.11 integer read-write
This attribute allows to configure the Oc3 card as the primary or secondary source for network clock. This attribute is valid only if networkClk is selected in hcxSyncClkConfigure attribute. Only 1 Oc3 Card can be configured as the priSrc and 1 Oc3 Card can be configured as secSrc in the HCX system Default: disable Enumeration: 'disable': 1, 'priSrc': 2, 'secSrc': 3.
 com21HcxOc3PortGroup 1.3.6.1.4.1.1141.2.92
       com21HcxOc3PortTable 1.3.6.1.4.1.1141.2.92.1 no-access
.
           com21HcxOc3PortEntry 1.3.6.1.4.1.1141.2.92.1.1 no-access
.
               hcxOc3PortShelfId 1.3.6.1.4.1.1141.2.92.1.1.1 integer read-only
contains shelf in which this Oc3 port is located.
               hcxOc3PortSlotId 1.3.6.1.4.1.1141.2.92.1.1.2 integer32 read-only
contains slot in which this Oc3 port is located.
               hcxOc3PortId 1.3.6.1.4.1.1141.2.92.1.1.3 integer read-only
contains port Id Oc3 port.
               hcxOc3PortPrimServState 1.3.6.1.4.1.1141.2.92.1.1.4 primservicestate read-only
contains primary service state of the Oc3 Unit. This state shall be effected by the hcxOc3PortState attribute.
               hcxOc3PortSecServState 1.3.6.1.4.1.1141.2.92.1.1.5 displaystring read-only
contains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: MT - offline, set by hcxOc3, FAULT - hardware failure, TEST - test, UNEQ - unequipped.
               hcxOc3MaxBandwidth 1.3.6.1.4.1.1141.2.92.1.1.6 integer read-write
This attribute defines the maximum output payload bandwidth associated with the Oc3 port. Defined in thousands of bps. From 0 to 22222. This value shall be checked by the CC which shall ensure that the aggregate of the hcxOc3MaxBandwidth and hcxEtherMaxBandwidth attributes for each of the Oc3 and Ethernet ports does not exceed the system maximum. If Voice Channels are configured on this Port, and if Voice channels are active, Ondemand Data bandwidth will get squeezed if Voice Channels are active. Default: 7000
               hcxOc3AggrDnStrmCbrRate 1.3.6.1.4.1.1141.2.92.1.1.7 integer32 read-only
This attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxOc3AggrDnStrmPcrRate 1.3.6.1.4.1.1141.2.92.1.1.8 integer32 read-only
This attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxOc3AggrUpStrmCbrRate 1.3.6.1.4.1.1141.2.92.1.1.9 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxOc3AggrUpStrmMinRate 1.3.6.1.4.1.1141.2.92.1.1.10 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxOc3AggrUpStrmMaxRate 1.3.6.1.4.1.1141.2.92.1.1.11 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Oc3 port This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxOc3AgeTime 1.3.6.1.4.1.1141.2.92.1.1.12 integer32 read-write
This attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300secs. If this set to 0, then aging is disabled.
               hcxOc3PortConfigState 1.3.6.1.4.1.1141.2.92.1.1.13 integer read-write
The Oc3 Port State is an active-value. The Oc3 port will default to offline, in which case no traffic shall be passed. Default offline. Enumeration: 'test': 2002, 'offline': 2000, 'online': 2001.
               hcxOc3PortRestartAction 1.3.6.1.4.1.1141.2.92.1.1.14 integer read-write
The Oc3 Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 port to reset and download a new image. Enumeration: 'restart': 2, 'nil': 1.
               hcxOc3PortDiagTestAction 1.3.6.1.4.1.1141.2.92.1.1.15 integer read-write
This attribute is used to invoke the internal Oc3 card diagnostic test. In order to activate this test, the card must be placed in the test state. Enumeration: 'execute': 2, 'nil': 1.
               hcxOc3PortDiagTestResult 1.3.6.1.4.1.1141.2.92.1.1.16 integer read-only
This attribute contains the result of the last Oc3 port diagnostic test. Enumeration: 'invalidState': 4, 'failure': 3, 'inprogress': 1, 'success': 2.
               hcxOc3PortLOSLed 1.3.6.1.4.1.1141.2.92.1.1.17 integer read-only
The OC3 Loss Of Signal LED indicates whether a Loss of Signal is present on the WAN side of the OC3 port. Enumeration: 'on': 1, 'off': 2.
               hcxOc3AggrActDnStrmCbrRate 1.3.6.1.4.1.1141.2.92.1.1.18 integer32 read-only
This attribute specifies the aggregate of all ComPort downstream CBR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxOc3AggrActDnStrmPcrRate 1.3.6.1.4.1.1141.2.92.1.1.19 integer32 read-only
This attribute specifies the aggregate of all ComPort downstream PCR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxOc3AggrActUpStrmCbrRate 1.3.6.1.4.1.1141.2.92.1.1.20 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream CBR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in bits per second.
               hcxOc3AggrActUpStrmMinRate 1.3.6.1.4.1.1141.2.92.1.1.21 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxOc3AggrActUpStrmMaxRate 1.3.6.1.4.1.1141.2.92.1.1.22 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxOc3PortIpAddr 1.3.6.1.4.1.1141.2.92.1.1.23 ipaddress read-write
IP Address associated with this ethernet port. This is a future item for telephone return support.
               hcxOc3PortIpMask 1.3.6.1.4.1.1141.2.92.1.1.24 ipaddress read-write
IP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support.
               hcxOc3PortMacAddr 1.3.6.1.4.1.1141.2.92.1.1.25 macaddress read-only
MAC address associated with port.
               hcxOc3Port1483EncapEnbl 1.3.6.1.4.1.1141.2.92.1.1.26 integer read-write
This attribute is used to Enable/Disable 1483 Encapsulation on the Oc3Port. If enabled, then all Ethernet packets received by the Oc3Port should be 1483 Encapsulated and all Ethernet packets transmitted by the Oc3Port will be 1483 Encapsulated. Default: enable. Enumeration: 'enable': 2, 'disable': 1.
               hcxOc3PortSectionLOS 1.3.6.1.4.1.1141.2.92.1.1.27 integer read-only
This attribute indicates whether Section Loss of Signal is present at the OC3 Port. Default: off. Enumeration: 'on': 1, 'off': 2.
               hcxOc3PortSectionLOF 1.3.6.1.4.1.1141.2.92.1.1.28 integer read-only
This attribute indicates whether Section Loss of Frame is present at the OC3 Port. Default: off. Enumeration: 'on': 1, 'off': 2.
               hcxOc3PortLineAIS 1.3.6.1.4.1.1141.2.92.1.1.29 integer read-only
This attribute indicates whether Line Alarm Indication Signal is detected by the OC3 Port Default: off. Enumeration: 'on': 1, 'off': 2.
               hcxOc3PortLineRDI 1.3.6.1.4.1.1141.2.92.1.1.30 integer read-only
This attribute indicates whether Line Remote Defect Indication is detected by the OC3 Port Default: off. Enumeration: 'on': 1, 'off': 2.
               hcxOc3PortPathRDI 1.3.6.1.4.1.1141.2.92.1.1.31 integer read-only
This attribute indicates whether Path Remote Defect Indication is detected by the OC3 Port Default: off. Enumeration: 'on': 1, 'off': 2.
               hcxOc3PortAggrVoiceRate 1.3.6.1.4.1.1141.2.92.1.1.32 integer32 read-only
This attribute specifies the aggregate Rate of all Voice Channels configured on this Port. A voice channel is considered configured on this Port if: a ComPort is configured with Voice Channel and the ComPort is configured on a Vlan which is on this Port. The rate specified here includes both acquired and unacquired ComPorts and is the same in both Upstream and Downstream Direction. Defined in Kbps.
               hcxOc3PortAggrActVoiceRate 1.3.6.1.4.1.1141.2.92.1.1.33 integer32 read-only
This attribute specifies the aggregate Rate of all Voice Channels Active on this Port. A voice channel is considered Active on this Port if: a ComPort is configured with Voice Channel and the ComPort is configured on a Vlan which is on this Port and the Comport is acquired and the Comport has a Voice Channel Active. The rate specified here is the same in both Upstream and Downstream Direction. Defined in Kbps.
               hcxOc3PortLOFLed 1.3.6.1.4.1.1141.2.92.1.1.34 integer read-only
The OC3 Loss Of Frame LED indicates whether a Loss of Frame is present on the WAN side of the OC3 port. Enumeration: 'on': 1, 'off': 2.
 com21HcxOc3VccGroup 1.3.6.1.4.1.1141.2.93
       com21HcxOc3VccTable 1.3.6.1.4.1.1141.2.93.1 no-access
.
           com21HcxOc3VccEntry 1.3.6.1.4.1.1141.2.93.1.1 no-access
.
               hcxOc3VccShelfId 1.3.6.1.4.1.1141.2.93.1.1.1 integer32 read-only
Specifies the Shelf where this Entry exists.
               hcxOc3VccSlotId 1.3.6.1.4.1.1141.2.93.1.1.2 integer32 read-only
Specifies the Slot where this Entry exists.
               hcxOc3VccPortId 1.3.6.1.4.1.1141.2.93.1.1.3 integer32 read-only
Specifies the Port where this Entry exists.
               hcxOc3VccVpi 1.3.6.1.4.1.1141.2.93.1.1.4 integer32 read-only
Specifies the Vpi where this Entry exists.
               hcxOc3VccVci 1.3.6.1.4.1.1141.2.93.1.1.5 integer32 read-only
Specifies the Vci where this Entry exists.
               hcxOc3VccType 1.3.6.1.4.1.1141.2.93.1.1.6 integer read-only
Specifies whether this VCC is used to transport data or voice. Enumeration: 'voice': 2, 'data': 1.
 com21HcxOc3StatsGroup 1.3.6.1.4.1.1141.2.94
       com21HcxOc3StatsTable 1.3.6.1.4.1.1141.2.94.1 no-access
.
           com21HcxOc3StatsEntry 1.3.6.1.4.1.1141.2.94.1.1 no-access
.
               hcxOc3StatsShelfId 1.3.6.1.4.1.1141.2.94.1.1.1 integer32 read-only
Specifies the Shelf where this Entry exists.
               hcxOc3StatsSlotId 1.3.6.1.4.1.1141.2.94.1.1.2 integer32 read-only
Specifies the Slot where this Entry exists.
               hcxOc3StatsPortId 1.3.6.1.4.1.1141.2.94.1.1.3 integer32 read-only
Specifies the Port where this Entry exists.
               hcxOc3StatsCurrSectionBIPErr 1.3.6.1.4.1.1141.2.94.1.1.4 integer32 read-only
This attributes displays the number of Section Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsCurrLineBIPErr 1.3.6.1.4.1.1141.2.94.1.1.5 integer32 read-only
This attributes displays the number of Line Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsCurrPathBIPErr 1.3.6.1.4.1.1141.2.94.1.1.6 integer32 read-only
This attributes displays the number of Path Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsCurrLineFEndBlockErr 1.3.6.1.4.1.1141.2.94.1.1.7 integer32 read-only
This attributes displays the number of Far End Line Block Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsCurrPathFEndBlockErr 1.3.6.1.4.1.1141.2.94.1.1.8 integer32 read-only
This attributes displays the number of Far End Path Block Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsPrevSectionBIPErr 1.3.6.1.4.1.1141.2.94.1.1.9 integer32 read-only
This attributes displays the number of Section Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsPrevLineBIPErr 1.3.6.1.4.1.1141.2.94.1.1.10 integer32 read-only
This attributes displays the number of Line Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsPrevPathBIPErr 1.3.6.1.4.1.1141.2.94.1.1.11 integer32 read-only
This attributes displays the number of Path Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsPrevLineFEndBlockErr 1.3.6.1.4.1.1141.2.94.1.1.12 integer32 read-only
This attributes displays the number of Far End Line Block Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsPrevPathFEndBlockErr 1.3.6.1.4.1.1141.2.94.1.1.13 integer32 read-only
This attributes displays the number of Far End Path Block Errors reported by the OC3 Port in the current 15-minute period.
               hcxOc3StatsClear 1.3.6.1.4.1.1141.2.94.1.1.14 integer read-write
This attribute is used to clear the all OC3 Stats statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. Enumeration: 'clear': 2, 'nil': 1.
 hcxOc3UnitPrimStateChange 1.3.6.1.4.1.1141.4.150
This trap is generated whenever a change in the the hcxOc3UnitPrimServState occurs. This an event with no clear condition. Only severity is WARNING.
 hcxOc3UnitSecStateChange 1.3.6.1.4.1.1141.4.151
This trap is generated whenever a change in the the hcxOc3UnitSecServState occurs. This an event with no clear condition. Only severity is WARNING.
 hcxOc3TestStatusLedChange 1.3.6.1.4.1.1141.4.152
generated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING.
 hcxOc3FaultStatusLedChange 1.3.6.1.4.1.1141.4.153
generated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING.
 hcxOc3PortPrimStateChange 1.3.6.1.4.1.1141.4.154
This trap is generated whenever a change in the the hcxOc3PortPrimServState occurs. This an event with no clear condition. Only severity is WARNING.
 hcxOc3PortSecStateChange 1.3.6.1.4.1.1141.4.155
This trap is generated whenever a change in the the hcxOc3PortSecServState occurs. This an event with no clear condition. Only severity is WARNING.
 hcxOc3PortDiagTestComplete 1.3.6.1.4.1.1141.4.156
This notification is generated whenever the Oc3 port internal diagnostic tests are completed. Event only, no clear. Only severity allowed is WARNING.
 hcxOc3OperationFailure 1.3.6.1.4.1.1141.4.157
This notification is generated by the CC whenever an Oc3 port fails to respond correctly to a request. This failure could indicate either a resource problem or software failure. Note that if an Oc3 card failures to respond completely to a CC request, then a hcxInsertChange trap shall be generated. This is an event without a corresponding clear. Only severity allowed is WARNING.
 hcxOc3PortLOSLedChange 1.3.6.1.4.1.1141.4.158
generated whenever there is a change in the LOS LED status. This an event with no clear condition. Only severity is WARNING.
 hcxOc3PortSectionLOSDetected 1.3.6.1.4.1.1141.4.159
generated whenever Loss of Signal is detected at the OC3 Port. Alarm Severity: MAJOR
 hcxOc3PortSectionLOSClear 1.3.6.1.4.1.1141.4.160
generated whenever Loss of Signal is Cleared at the OC3 Port. Alarm Severity: CLEAR
 hcxOc3PortSectionLOFDetected 1.3.6.1.4.1.1141.4.161
generated whenever Loss of Frame is detected at the OC3 Port. Alarm Severity: MAJOR
 hcxOc3PortSectionLOFClear 1.3.6.1.4.1.1141.4.162
generated whenever Loss of Frame is cleared at the OC3 Port. Alarm Severity: CLEAR
 hcxOc3PortLineAISDetected 1.3.6.1.4.1.1141.4.163
generated whenever AIS is detected at the OC3 Port. Alarm Severity: MAJOR
 hcxOc3PortLineAISClear 1.3.6.1.4.1.1141.4.164
generated whenever AIS is cleared at the OC3 Port. Alarm Severity: CLEAR
 hcxOc3PortLineRDIDetected 1.3.6.1.4.1.1141.4.165
generated whenever Line Remote Defect Indication is detected at the OC3 Port. Alarm Severity: MAJOR
 hcxOc3PortLineRDIClear 1.3.6.1.4.1.1141.4.166
generated whenever Line Remote Defect Indication is cleared at the OC3 Port. Alarm Severity: CLEAR
 hcxOc3PortPathRDIDetected 1.3.6.1.4.1.1141.4.167
generated whenever Path Remote Defect Indication is detected at the OC3 Port. Alarm Severity: MAJOR
 hcxOc3PortPathRDIClear 1.3.6.1.4.1.1141.4.168
generated whenever Path Remote Defect Indication is cleared at the OC3 Port. Alarm Severity: CLEAR
 hcxOc3PortLOFLedChange 1.3.6.1.4.1.1141.4.169
generated whenever there is a change in the LOF LED status. This an event with no clear condition. Only severity is WARNING.