COM21-HCXETH-MIB: View SNMP OID List / Download MIB

VENDOR: COM21


 Home MIB: COM21-HCXETH-MIB
Download as:   
SNMPv2-CONF, COM21-HCX-MIB, COM21-HCXALM-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 com21HcxEth 1.3.6.1.4.1.1141.2.40
This is the Com21 ComController Ethernet MIB module. COM21 Part# 005-0025-00
 com21HcxEtherUnitGroup 1.3.6.1.4.1.1141.2.41
       com21HcxEtherUnitTable 1.3.6.1.4.1.1141.2.41.1 no-access
.
           com21HcxEtherUnitEntry 1.3.6.1.4.1.1141.2.41.1.1 no-access
.
               hcxEtherShelfId 1.3.6.1.4.1.1141.2.41.1.1.1 integer read-only
contains the associated shelf id.
               hcxEtherSlotId 1.3.6.1.4.1.1141.2.41.1.1.2 integer32 read-only
contains associated slot id.
               hcxEtherCardType 1.3.6.1.4.1.1141.2.41.1.1.3 integer read-only
contains Ethernet card type. Enumeration: 'onehundredBaseT': 2, 'tenBaseT': 1.
               hcxEtherNoPorts 1.3.6.1.4.1.1141.2.41.1.1.4 integer read-only
contains the number of ports supported by the Ethernet card.
               hcxEtherHardwareVersion 1.3.6.1.4.1.1141.2.41.1.1.5 displaystring read-only
contains the hardware version of the Ethernet card. Will contain empty string if card has not been inserted in the slot.
               hcxEtherBootVersion 1.3.6.1.4.1.1141.2.41.1.1.6 displaystring read-only
contains the version of the Ethernet card boot ROM. Will contain empty string if card has not been inserted in the slot.
               hcxEtherUnitPrimServState 1.3.6.1.4.1.1141.2.41.1.1.7 primservicestate read-only
contains primary service state of the Ethernet Unit.
               hcxEtherUnitSecServState 1.3.6.1.4.1.1141.2.41.1.1.8 displaystring read-only
contains a string defining the secondary service states of the Ethernet Unit. The substrings supported by the Ethernet Unit shall be: UNEQ - unequipped.
               hcxEtherRestartAction 1.3.6.1.4.1.1141.2.41.1.1.9 integer read-write
The Ethernet Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the Ethernet card to reset and download a new image. Enumeration: 'restart': 2, 'nil': 1.
               hcxEtherTestStatusLed 1.3.6.1.4.1.1141.2.41.1.1.10 integer read-only
The Ethernet Test Status LED is a read-only attribute which describes the condition of the Ethernet Test Status light emitting diode located on the Ethernet board. A value of on(1) indicates that a service effecting test is in progress and that the LED is illuminated. Will be off if no card present. Enumeration: 'on': 1, 'off': 2.
               hcxEtherFaultStatusLed 1.3.6.1.4.1.1141.2.41.1.1.11 integer read-only
The Ethernet Fault Status LED is a read-only attribute which describes the condition of the Ethernet Fault Status light emitting diode located on the Ethernet board. A value of on(1) indicates that an fault condition has been detected (for which a trap will have been issued) and the LED is illuminated. Will be off if no card present. Enumeration: 'on': 1, 'off': 2.
               hcxEtherSerialNumber 1.3.6.1.4.1.1141.2.41.1.1.12 displaystring read-only
contains the serial number of the Ethernet card. Will contain empty string if card has not been inserted in the slot.
 com21HcxEtherPortGroup 1.3.6.1.4.1.1141.2.42
       com21HcxEtherPortTable 1.3.6.1.4.1.1141.2.42.1 no-access
.
           com21HcxEtherPortEntry 1.3.6.1.4.1.1141.2.42.1.1 no-access
.
               hcxEtherPortShelfId 1.3.6.1.4.1.1141.2.42.1.1.1 integer read-only
contains shelf in which this Ethernet port is located.
               hcxEtherPortSlotId 1.3.6.1.4.1.1141.2.42.1.1.2 integer32 read-only
contains slot in which this Ethernet port is located.
               hcxEtherPortId 1.3.6.1.4.1.1141.2.42.1.1.3 integer read-only
contains Ethernet port id. Represents the port number on the card. In the case of single 10baseT or 100baseT, this value will always be 1. In the case of a quad 10baseT card, this value is in the range 1-4.
               hcxEtherPortType 1.3.6.1.4.1.1141.2.42.1.1.4 integer read-only
contains type of Ethernet port. Enumeration: 'onehundredBaseT': 2, 'tenBaseT': 1.
               hcxEtherPortService 1.3.6.1.4.1.1141.2.42.1.1.5 displaystring read-write
contains string defining the service provided by the Ethernet port (VLAN). Set by NMAPS. Default null string. CC most ensure uniqueness.
               hcxEtherPortPrimServState 1.3.6.1.4.1.1141.2.42.1.1.6 primservicestate read-only
contains primary service state of the Ethernet Unit. This state shall be effected by the hcxEtherPortState attribute.
               hcxEtherPortSecServState 1.3.6.1.4.1.1141.2.42.1.1.7 displaystring read-only
contains a string defining the secondary service states of the Ethernet Unit. The substrings supported by the Ethernet Unit shall be: MT - offline, set by hcxEthernetUnitState, FAULT - hardware failure, TEST - test, UNEQ - unequipped.
               hcxEtherMaxBandwidth 1.3.6.1.4.1.1141.2.42.1.1.9 integer read-write
This attribute defines the maximum output payload bandwidth associated with the Ethernet port. Defined in thousands of bps. From 0 to 22222. This value shall be checked by the CC which shall ensure that the aggregate of the hcxEtherMaxBandwidth attributes for each of the Ethernet ports does not exceed the system maximum. Note max for 10bT port is 11560. Default: 7000.
               hcxEtherAggrDnStrmCbrRate 1.3.6.1.4.1.1141.2.42.1.1.12 integer32 read-only
This attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxEtherAggrDnStrmPcrRate 1.3.6.1.4.1.1141.2.42.1.1.13 integer32 read-only
This attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxEtherAggrUpStrmCbrRate 1.3.6.1.4.1.1141.2.42.1.1.14 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxEtherAggrUpStrmMinRate 1.3.6.1.4.1.1141.2.42.1.1.15 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxEtherAggrUpStrmMaxRate 1.3.6.1.4.1.1141.2.42.1.1.16 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps.
               hcxEtherAgeTime 1.3.6.1.4.1.1141.2.42.1.1.17 integer32 read-write
This attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300secs. If this set to 0, then aging is disabled.
               hcxEtherPortConfigState 1.3.6.1.4.1.1141.2.42.1.1.18 integer read-write
The Ethernet Port State is an active-value. The Ethernet port will default to offline, in which case no traffic shall be passed. Default offline. Enumeration: 'test': 2002, 'offline': 2000, 'online': 2001.
               hcxEtherPortRestartAction 1.3.6.1.4.1.1141.2.42.1.1.19 integer read-write
The Ethernet Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Ethernet port to reset and download a new image. Enumeration: 'restart': 2, 'nil': 1.
               hcxEtherPortDiagTestAction 1.3.6.1.4.1.1141.2.42.1.1.20 integer read-write
This attribute is used to invoke the internal Ethernet card diagnostic test. In order to activate this test, the card must be placed in the test state. Enumeration: 'execute': 2, 'nil': 1.
               hcxEtherPortDiagTestResult 1.3.6.1.4.1.1141.2.42.1.1.21 integer read-only
This attribute contains the result of the last Ethernet port diagnostic test. Enumeration: 'invalidState': 4, 'failure': 3, 'inprogress': 1, 'success': 2.
               hcxEtherPortLinkStatusLed 1.3.6.1.4.1.1141.2.42.1.1.22 integer read-only
The Ethernet Link Status LED is a read-only attribute which describes the condition of the Ethernet Link Status light emitting diode located on the Ethernet board. A value of on(1) indicates that the link is up and active, and that the LED is illuminated. Will be off if no card present. Enumeration: 'on': 1, 'off': 2.
               hcxEtherPortArpFiltRate 1.3.6.1.4.1.1141.2.42.1.1.24 integer read-write
No longer supported
               hcxEtherAggrActDnStrmCbrRate 1.3.6.1.4.1.1141.2.42.1.1.25 integer32 read-only
This attribute specifies the aggregate of all ComPort downstream CBR rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxEtherAggrActDnStrmPcrRate 1.3.6.1.4.1.1141.2.42.1.1.26 integer32 read-only
This attribute specifies the aggregate of all ComPort downstream PCR rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxEtherAggrActUpStrmCbrRate 1.3.6.1.4.1.1141.2.42.1.1.27 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream CBR rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxEtherAggrActUpStrmMinRate 1.3.6.1.4.1.1141.2.42.1.1.28 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxEtherAggrActUpStrmMaxRate 1.3.6.1.4.1.1141.2.42.1.1.29 integer32 read-only
This attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Ethernet port (VLAN). This includes only acquired ComPorts. Defined in Kbps.
               hcxEtherPortIpAddr 1.3.6.1.4.1.1141.2.42.1.1.30 ipaddress read-write
IP Address associated with this ethernet port. This is a future item for telephone return support.
               hcxEtherPortIpMask 1.3.6.1.4.1.1141.2.42.1.1.31 ipaddress read-write
IP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support.
               hcxEtherPortMacAddr 1.3.6.1.4.1.1141.2.42.1.1.32 macaddress read-only
MAC address associated with port.
               hcxEtherPortAutoNegEnable 1.3.6.1.4.1.1141.2.42.1.1.33 integer read-write
This attribute is used for 100BaseT ports ONLY, to enable/disable Auto Negotiation Feature. Default is Auto Negotiation Enable. For 10bT ports this attribute will be read-only with a value of off. Enumeration: 'on': 1, 'off': 2.
               hcxEtherPortSpeedSelect 1.3.6.1.4.1.1141.2.42.1.1.34 integer read-write
If 'hcxEtherPortAutoNegEnble' is set to 'off' then the Media speed of the port is set to the value in this attribute. This attribute is valid only for 100BaseT ports - for 10bT ports this attribute shall be read-only with a value of tenMbpsHalfDuplex. Default for 100bT ports is 'hundredMbps'. An error will be returned if PortSpeed is set to 'tenMbps' and 'hcxEtherMaxBandwidth' is greater than 10 Mbps Enumeration: 'hundredMbpsHalfDulplex': 3, 'hundredMbpsFullDuplex': 4, 'tenMbpsHalfDuplex': 1, 'tenMbpsFullDuplex': 2.
               hcxEtherCurrPortState 1.3.6.1.4.1.1141.2.42.1.1.35 integer read-only
specifies the Media speed of the port. Enumeration: 'hundredMbpsHalfDulplex': 6, 'tenMbpsFullDuplex': 5, 'linkFail': 1, 'autoNegFailure': 3, 'autoNegPending': 2, 'hundredMbpsFullDuplex': 7, 'tenMbpsHalfDuplex': 4.
 com21HcxEtherStatsGroup 1.3.6.1.4.1.1141.2.43
       com21HcxEtherStatsTable 1.3.6.1.4.1.1141.2.43.1 no-access
.
           com21HcxEtherStatsEntry 1.3.6.1.4.1.1141.2.43.1.1 no-access
.
               hcxEtherStatsShelfId 1.3.6.1.4.1.1141.2.43.1.1.1 integer read-only
contains shelf in which the associated Ethernet port is located.
               hcxEtherStatsSlotId 1.3.6.1.4.1.1141.2.43.1.1.2 integer32 read-only
contains slot in which the associated Ethernet port is located.
               hcxEtherStatsPortId 1.3.6.1.4.1.1141.2.43.1.1.3 integer read-only
contains the associated Ethernet port id.
               hcxEtherCurrCollisions 1.3.6.1.4.1.1141.2.43.1.1.4 gauge32 read-only
contains the number of detected collisions in the current 15 minute period.
               hcxEtherCurrRunts 1.3.6.1.4.1.1141.2.43.1.1.5 gauge32 read-only
contains the number of receive runt packets in the current 15 minute period.
               hcxEtherCurrGrunts 1.3.6.1.4.1.1141.2.43.1.1.6 gauge32 read-only
contains the number of received grunt packets in the current 15 minute period.
               hcxEtherCurrCrcPkts 1.3.6.1.4.1.1141.2.43.1.1.7 gauge32 read-only
contains the number of ethernet packets with CRC errors received in the current 15 minute period.
               hcxEtherCurrTxPkts 1.3.6.1.4.1.1141.2.43.1.1.8 gauge32 read-only
contains the number of ethernet packets transmitted in the current 15 minute period.
               hcxEtherCurrRxPkts 1.3.6.1.4.1.1141.2.43.1.1.9 gauge32 read-only
contains the number of ethernet packets received in the current 15 minute period.
               hcxEtherPrevCollisions 1.3.6.1.4.1.1141.2.43.1.1.10 gauge32 read-only
contains the number of detected collisions in the previous 15 minute period.
               hcxEtherPrevRunts 1.3.6.1.4.1.1141.2.43.1.1.11 gauge32 read-only
contains the number of received runt packets in the previous 15 minute period.
               hcxEtherPrevGrunts 1.3.6.1.4.1.1141.2.43.1.1.12 gauge32 read-only
contains the number of received grunt packets in the previous 15 minute period.
               hcxEtherPrevCrcPkts 1.3.6.1.4.1.1141.2.43.1.1.13 gauge32 read-only
contains the number of ethernet packets received with CRC errors in the previous 15 minute period.
               hcxEtherPrevTxPkts 1.3.6.1.4.1.1141.2.43.1.1.14 gauge32 read-only
contains the number of ethernet packets transmitted in the previous 15 minute period.
               hcxEtherPrevRxPkts 1.3.6.1.4.1.1141.2.43.1.1.15 gauge32 read-only
contains the number of ethernet packets received in the previous 15 minute period.
               hcxEtherClearStats 1.3.6.1.4.1.1141.2.43.1.1.16 integer read-write
This attribute is used to clear all Ethernet statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. Enumeration: 'clear': 2, 'nil': 1.
 com21HcxEtherIpAddrGroup 1.3.6.1.4.1.1141.2.44
       com21HcxEtherIpAddrTable 1.3.6.1.4.1.1141.2.44.1 no-access
TBD.
           com21HcxEtherIpAddrEntry 1.3.6.1.4.1.1141.2.44.1.1 no-access
.
               hcxEtherIpAddrShelfId 1.3.6.1.4.1.1141.2.44.1.1.1 integer read-only
contains shelf in which the associated Ethernet port is located.
               hcxEtherIpAddrSlotId 1.3.6.1.4.1.1141.2.44.1.1.2 integer32 read-only
contains slot in which the associated Ethernet port is located.
               hcxEtherIpAddrPortId 1.3.6.1.4.1.1141.2.44.1.1.3 integer read-only
contains the associated Ethernet port id.
               hcxEtherIpAddrIPAddr 1.3.6.1.4.1.1141.2.44.1.1.4 ipaddress read-only
target IP Address. No ComPort will be able to use this IP address in an ARP response.
               hcxEtherIpAddrIPMask 1.3.6.1.4.1.1141.2.44.1.1.5 ipaddress read-write
IP mask. Default is ff.ff.ff.ff.
               hcxEtherIpAddrIPStatus 1.3.6.1.4.1.1141.2.44.1.1.6 com21rowstatus read-only
Used to delete or create an entry.
 com21HcxEtherStuStatsGroup 1.3.6.1.4.1.1141.2.45
       com21HcxEtherStuStatsTable 1.3.6.1.4.1.1141.2.45.1 no-access
.
           com21HcxEtherStuStatsEntry 1.3.6.1.4.1.1141.2.45.1.1 no-access
.
               hcxEtherStuStatsMacAddr 1.3.6.1.4.1.1141.2.45.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device.
               hcxEtherStuCurrDnstrmBytes 1.3.6.1.4.1.1141.2.45.1.1.2 gauge32 read-only
Contains the number of unicast bytes transmitted downstream to this ComPort in the current 15 minute collection period.
               hcxEtherStuCurrUpstrmBytes 1.3.6.1.4.1.1141.2.45.1.1.3 gauge32 read-only
Contains the number of bytes received upstream from this ComPort in the current 15 minute collection period.
               hcxEtherStuCurrUpstrmAal5CrcErrs 1.3.6.1.4.1.1141.2.45.1.1.4 gauge32 read-only
Contains the number of AAL5 CRC errors related to upstream traffic from the ComPort in the current 15 minute collection period. Each of these errors indicates a dropped Ethernet frame.
               hcxEtherStuCurrDnstrmDropPkts 1.3.6.1.4.1.1141.2.45.1.1.5 gauge32 read-only
Contains the number of dropped Ethernet frames in the downstream direction in the current 15min period. These frames are generally dropped due to policing.
               hcxEtherStuPrevDnstrmBytes 1.3.6.1.4.1.1141.2.45.1.1.6 gauge32 read-only
Contains the number of unicast bytes transmitted downstream to this ComPort in the last 15 minute collection period.
               hcxEtherStuPrevUpstrmBytes 1.3.6.1.4.1.1141.2.45.1.1.7 gauge32 read-only
Contains the number of bytes received upstream from this ComPort in the last 15 minute collection period.
               hcxEtherStuPrevUpstrmAal5CrcErrs 1.3.6.1.4.1.1141.2.45.1.1.8 gauge32 read-only
Contains the number of AAL5 CRC errors related to upstream traffic from the ComPort in the last 15 minute collection period. Each of these errors indicates a dropped Ethernet frame.
               hcxEtherStuPrevDnstrmDropPkts 1.3.6.1.4.1.1141.2.45.1.1.9 gauge32 read-only
Contains the number of dropped RX frames in the upstream direction in the previous 15min period.
               hcxEtherStuClearStats 1.3.6.1.4.1.1141.2.45.1.1.10 integer read-write
This attribute is used to clear all ComPort statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. Enumeration: 'clear': 2, 'nil': 1.
 com21HcxServGrpAssocGroup 1.3.6.1.4.1.1141.2.46
       com21HcxServGrpAssocTable 1.3.6.1.4.1.1141.2.46.1 no-access
.
           com21HcxServGrpAssocEntry 1.3.6.1.4.1.1141.2.46.1.1 no-access
.
               hcxServGrpAssocShelfId 1.3.6.1.4.1.1141.2.46.1.1.1 integer read-only
defines shelfId to index into this entry. It is the ShelfId where this Service Group has an entry
               hcxServGrpAssocSlotId 1.3.6.1.4.1.1141.2.46.1.1.2 integer read-only
defines SlotId to index into this entry. It is the slot where this Service Group has an entry
               hcxServGrpAssocCardType 1.3.6.1.4.1.1141.2.46.1.1.3 integer read-only
defines cardType to index into this entry. It is the card Type where this Service Group has an entry Enumeration: 'oc3': 3, 'onehundredBaseT': 2, 'tenBaseT': 1.
               hcxServGrpAssocPortId 1.3.6.1.4.1.1141.2.46.1.1.4 integer32 read-only
defines portId to index into this entry. It is the port number where this Service Group has an entry
               hcxServGrpAssocEntryId 1.3.6.1.4.1.1141.2.46.1.1.5 integer32 read-only
defines entryId to index into this entry. it is the entry number assigned to this service group
               hcxServGrpAssocRate 1.3.6.1.4.1.1141.2.46.1.1.6 integer32 read-only
contains Rate associated with this Entry.
               hcxServGrpAssocType 1.3.6.1.4.1.1141.2.46.1.1.7 integer read-only
contains Type associated with this Entry. Enumeration: 'cbr': 1, 'ondemand': 2.
               hcxServGrpAssocNumOfVlans 1.3.6.1.4.1.1141.2.46.1.1.8 integer32 read-only
contains number of Vlans associated with this Service Group
               hcxServGrpAssocNumOfStus 1.3.6.1.4.1.1141.2.46.1.1.9 integer32 read-only
contains number of Stus associated with this Service Group
 hcxEtherUnitPrimStateChange 1.3.6.1.4.1.1141.4.20
This trap is generated whenever a change in the the hcxEtherUnitPrimServState occurs. This an event with no clear condition. Only severity is WARNING.
 hcxEtherUnitSecStateChange 1.3.6.1.4.1.1141.4.21
This trap is generated whenever a change in the the hcxEtherUnitSecServState occurs. This an event with no clear condition. Only severity is WARNING.
 hcxEtherTestStatusLedChange 1.3.6.1.4.1.1141.4.22
generated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING.
 hcxEtherFaultStatusLedChange 1.3.6.1.4.1.1141.4.23
generated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING.
 hcxEtherPortPrimStateChange 1.3.6.1.4.1.1141.4.24
This trap is generated whenever a change in the the hcxEtherPortPrimServState occurs. This an event with no clear condition. Only severity is WARNING.
 hcxEtherPortSecStateChange 1.3.6.1.4.1.1141.4.25
This trap is generated whenever a change in the the hcxEtherPortSecServState occurs. This an event with no clear condition. Only severity is WARNING.
 hcxEtherPortDiagTestComplete 1.3.6.1.4.1.1141.4.26
This notification is generated whenever the Ethernet port internal diagnostic tests are completed. Event only, no clear. Only severity allowed is WARNING.
 hcxEtherOperationFailure 1.3.6.1.4.1.1141.4.27
This notification is generated by the CC whenever an Ethernet port fails to respond correctly to a request. This failure could indicate either a resource problem or software failure. Note that if an Ethernet card failures to respond completely to a CC request, then a hcxInsertChange trap shall be generated. This is an event without a corresponding clear. Only severity allowed is WARNING.
 hcxEtherPortLinkStatusLedChange 1.3.6.1.4.1.1141.4.28
generated whenever there is a change in link LED status. This an event with no clear condition. Only severity is WARNING.