CNT246-MIB: View SNMP OID List / Download MIB

VENDOR: COMPUTER NETWORK TECHNOLOGY


 Home MIB: CNT246-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cnt2Transport 1.3.6.1.4.1.333.2.4.6
This defines the CNT Transport MIB. The Transport layer provides network link for CNT proprietary traffic.
     cnt2TransportTable 1.3.6.1.4.1.333.2.4.6.1 no-access
A list of Transport network link entries.
         cnt2TransportEntry 1.3.6.1.4.1.333.2.4.6.1.1 no-access
A Transport network link entry.
             cnt2TransportSlotIndex 1.3.6.1.4.1.333.2.4.6.1.1.1 integer32 read-only
The slot index for this Transport entry
             cnt2TransportIndex 1.3.6.1.4.1.333.2.4.6.1.1.2 integer32 read-only
The relative index of the bus number in this Transport entry
             cnt2TransportBus 1.3.6.1.4.1.333.2.4.6.1.1.3 integer32 read-only
The network link bus number
             cnt2TransportVid 1.3.6.1.4.1.333.2.4.6.1.1.4 integer32 read-only
The virtual circuit number VCI. If ATM is used, make sure this Vid is configured the same as the VCI. Failure to do so will cause unexpected results
             cnt2TransportLinkType 1.3.6.1.4.1.333.2.4.6.1.1.5 integer read-only
The Link type supported by the CNT Transport layer. Enumeration: 'lane': 13, 'fibrechannel': 10, 'atm': 8, 'ipv4': 14, 'unknown': 99, 'ethernet': 9, 'ds3e3': 12, 'fddi': 11.
             cnt2TransportLinkDesc 1.3.6.1.4.1.333.2.4.6.1.1.6 displaystring read-only
The description of the network link suported by the CNT Transport layer
             cnt2TransportLinkStatus 1.3.6.1.4.1.333.2.4.6.1.1.7 integer read-only
The network link's status. The link status indicates if there is communication between the local node and the remote node. Enumeration: 'down': 2, 'up': 1.
             cnt2TransportIPtosPrecedence 1.3.6.1.4.1.333.2.4.6.1.1.8 integer read-write
The service precedence of IP Type of Service use by this link. There is an 8 bit field in an IP datagram that specifies the type of service a datagram is requesting (or hinting). It may then be used by the network to determine paths and precedence for a given datagram. The specific bits used may vary depending on the network (see RFC 791 for more details). The IpServiceType attribute can be used on a per circuit basis to specify the bits to be set in the IP datagram's service type field. Each Transport IP datagram destined for the DestionationIpAddress will have this field set. This attributes only applicable to IP providers. The service precedence is in bit 0-2 of the 8 bit IP Type of Service field. Enumeration: 'criticECP': 6, 'networkControl': 8, 'flash': 4, 'internetworkControl': 7, 'immediate': 3, 'priority': 2, 'routine': 1, 'flashOverride': 5.
             cnt2TransportIPtosDelay 1.3.6.1.4.1.333.2.4.6.1.1.9 integer read-write
The IP Type of Service Delay option use by this link. The Delay bit is in bit 3 of the 8 bit IP Type of Service field. Enumeration: 'low': 2, 'normal': 1.
             cnt2TransportIPtosThruput 1.3.6.1.4.1.333.2.4.6.1.1.10 integer read-write
The IP Type of Service Throughput option use by this link. The Throughput bit is in bit 4 of the 8 bit IP Type of Service field. Enumeration: 'high': 2, 'normal': 1.
             cnt2TransportIPtosRelibility 1.3.6.1.4.1.333.2.4.6.1.1.11 integer read-write
The IP Type of Service Relibility option use by this link. The Relibility bit is in bit 5 of the 8 bit IP Type of Service field. Enumeration: 'high': 2, 'normal': 1.
             cnt2TransportRemoteIp 1.3.6.1.4.1.333.2.4.6.1.1.12 ipaddress read-only
The remote IP address. This address is set when Transport is configured.
             cnt2TransportProtocol 1.3.6.1.4.1.333.2.4.6.1.1.13 integer read-only
The protocol used by this link. At the moment the only protocol is SAP. Enumeration: 'sap': 1.
             cnt2TransportCompressionOption 1.3.6.1.4.1.333.2.4.6.1.1.14 integer read-write
Reflects whether compression option is turned on/off. Enumeration: 'on': 1, 'off': 2.
             cnt2TransportMaxXmitRate 1.3.6.1.4.1.333.2.4.6.1.1.15 integer32 read-write
The Maximum Transfer Rate of this link.
             cnt2TransportResetTime 1.3.6.1.4.1.333.2.4.6.1.1.16 timeticks read-only
The time, in seconds, when the stats was last reset.
             cnt2TransportInPkts 1.3.6.1.4.1.333.2.4.6.1.1.17 counter32 read-only
The number of packets transmitted to the link
             cnt2TransportInOctets 1.3.6.1.4.1.333.2.4.6.1.1.18 counter64 read-only
The number of bytes transmitted to the link
             cnt2TransportOutPkts 1.3.6.1.4.1.333.2.4.6.1.1.19 counter32 read-only
The number of packets transmitted out from the link
             cnt2TransportOutOctets 1.3.6.1.4.1.333.2.4.6.1.1.20 counter64 read-only
The number of bytes transmitted out from the link
             cnt2TransportRexmit 1.3.6.1.4.1.333.2.4.6.1.1.21 counter32 read-only
The number of packets being retransmitted
             cnt2TransportOosHigh 1.3.6.1.4.1.333.2.4.6.1.1.22 counter32 read-only
The number of out of sequence packets received
             cnt2TransportStatsReset 1.3.6.1.4.1.333.2.4.6.1.1.23 integer read-write
Setting this will result the Transport statistic to be reset Enumeration: 'all': 1.
             cnt2TransportRawOutOctets 1.3.6.1.4.1.333.2.4.6.1.1.24 counter64 read-only
The number of bytes transmitted out from the lower interface of Transport layer. This is the amount of data after Compression plus Transport header.
             cnt2TransportRawInOctets 1.3.6.1.4.1.333.2.4.6.1.1.25 counter64 read-only
The number of bytes received in from the lower interface of Transport layer. This is the amount of data after Compression plus Transport header.
             cnt2TransportWindowSize 1.3.6.1.4.1.333.2.4.6.1.1.26 integer32 read-only
The current window size, value is number buffers outstanding on the connection
             cnt2TransportSegmentSize 1.3.6.1.4.1.333.2.4.6.1.1.27 integer32 read-only
Range from (0 to 65532) If this value is non-zero, this value is used for segmentation. If equal to 0, then TransportSegmentSizeHi is what being used.
             cnt2TransportSegmentSizeHi 1.3.6.1.4.1.333.2.4.6.1.1.28 integer32 read-only
Range from (0 to 65532) If this value is used when TransportSegmentSize is set to 0. This value is passed in from user layer's MTU size.
             cnt2TransportRoundTripTimer 1.3.6.1.4.1.333.2.4.6.1.1.29 integer32 read-only
The current round trip timer. each count is in 50msec.
             cnt2TransportHoldCount 1.3.6.1.4.1.333.2.4.6.1.1.30 counter32 read-only
The current hold count.
             cnt2TransportHoldCountRatio1 1.3.6.1.4.1.333.2.4.6.1.1.31 counter32 read-only
Incremented when an ack is received and there is no data on the hold queue and there is no outstanding (unacked) data. It indicates that transmission is idled until more data is received from the user.
             cnt2TransportHoldCountRatio2 1.3.6.1.4.1.333.2.4.6.1.1.32 counter32 read-only
Incremented when an ack is received and there is no data on the hold queue but there is outstanding (unacked) data.
             cnt2TransportHoldCountRatio3 1.3.6.1.4.1.333.2.4.6.1.1.33 counter32 read-only
Incremented when an ack is received and there is data on the hold queue ready to be sent.
             cnt2TransportTotalDisconnect 1.3.6.1.4.1.333.2.4.6.1.1.34 counter32 read-only
Total disconnects at Transport Layer.