CMM4-MIB: View SNMP OID List / Download MIB

VENDOR: MOTOROLA


 Home MIB: CMM4-MIB
Download as:   
SNMPv2-CONF, WHISP-GLOBAL-REG-MIB, WHISP-TCV2-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cmm4MibModule 1.3.6.1.4.1.161.19.1.1.15
This module contains CMM4 MIB definitions.
 cmm4Groups 1.3.6.1.4.1.161.19.3.6.1
     cmm4PortCfgGroup 1.3.6.1.4.1.161.19.3.6.1.1
CMM4 Port Configuration Table.
     cmm4ConfigGroup 1.3.6.1.4.1.161.19.3.6.1.2
CMM4 configuration group.
     cmm4PortStatusGroup 1.3.6.1.4.1.161.19.3.6.1.3
CMM4 Port Configuration Status Table.
     cmm4StatusGroup 1.3.6.1.4.1.161.19.3.6.1.4
CMM4 Status group.
     cmm4GPSGroup 1.3.6.1.4.1.161.19.3.6.1.5
CMM4 GPS status group.
     cmm4ControlsGroup 1.3.6.1.4.1.161.19.3.6.1.6
CMM4 Controls group.
     cmm4SNMPGroup 1.3.6.1.4.1.161.19.3.6.1.7
CMM4 SNMP group.
     cmm4UserTableGroup 1.3.6.1.4.1.161.19.3.6.1.8
CMM4 User Information Table group.
 cmm4Config 1.3.6.1.4.1.161.19.3.6.2
     gpsTimingPulse 1.3.6.1.4.1.161.19.3.6.2.1 integer read-write
(1) -- Master. (0) -- Slave. Enumeration: 'slave': 0, 'master': 1.
     lan1Ip 1.3.6.1.4.1.161.19.3.6.2.2 ipaddress read-write
LAN 1 IP address
     lan1SubnetMask 1.3.6.1.4.1.161.19.3.6.2.3 ipaddress read-write
LAN 1 subnet mask.
     defaultGateway 1.3.6.1.4.1.161.19.3.6.2.4 ipaddress read-write
Default gateway
     cmm4WebAutoUpdate 1.3.6.1.4.1.161.19.3.6.2.5 integer read-write
Web page auto update in seconds. 0 means disabled.
     cmm4ExtEthPowerReset 1.3.6.1.4.1.161.19.3.6.2.6 integer read-write
Resets power to external ethernet switch. (0) Reset Complete. (1) Reset Switch. Enumeration: 'on': 1, 'off': 0.
     cmm4PortCfgTable 1.3.6.1.4.1.161.19.3.6.2.7 no-access
A list of CMM 4 port configuration entries.
         cmm4PortCfgEntry 1.3.6.1.4.1.161.19.3.6.2.7.1 no-access
A CMM4 port entry containing objects with port status.
             portCfgIndex 1.3.6.1.4.1.161.19.3.6.2.7.1.1 integer read-only
A unique value for each CMM port.
             cmm4PortText 1.3.6.1.4.1.161.19.3.6.2.7.1.2 displaystring read-write
Port Description.
             cmm4PortDevType 1.3.6.1.4.1.161.19.3.6.2.7.1.3 integer read-write
Type of Device configured for each port. Enumeration: 'canopy56V': 2, 'none': 0, 'canopy': 1.
             cmm4PortPowerCfg 1.3.6.1.4.1.161.19.3.6.2.7.1.4 integer read-write
Port power status indicates power on or power off. Enumeration: 'on': 1, 'off': 0.
             cmm4PortResetCfg 1.3.6.1.4.1.161.19.3.6.2.7.1.5 integer read-write
Reset power to port if and only if port is currently powered. Enumeration: 'resetPort': 1, 'resetComplete': 0.
     cmm4IpAccessFilter 1.3.6.1.4.1.161.19.3.6.2.8 integer read-write
IP Access filtering. (0) Filtering Disabled - All IPs will be allowed access. (1) Filtering Enabled - Only allow IPs in the allowed access list. Enumeration: 'on': 1, 'off': 0.
     cmm4IpAccess1 1.3.6.1.4.1.161.19.3.6.2.9 ipaddress read-write
IP Access list entry 1.
     cmm4IpAccess2 1.3.6.1.4.1.161.19.3.6.2.10 ipaddress read-write
IP Access list entry 2.
     cmm4IpAccess3 1.3.6.1.4.1.161.19.3.6.2.11 ipaddress read-write
IP Access list entry 3.
     cmm4MgmtPortSpeed 1.3.6.1.4.1.161.19.3.6.2.12 integer read-write
Management Port Speed Configuration. (1) autoNegotiate - Auto negotiate to best speed and duplex setting. (2) force10Half - Set port to 10 Mbit/s half-duplex. (3) force10Full - Set port to 10 Mbit/s full-duplex. (4) force100Half - Set port to 100 Mbit/s half-duplex. (5) force100Full - Set port to 100 Mbit/s full-duplex. Enumeration: 'force100Full': 5, 'autoNegotiate': 1, 'force10Full': 3, 'force10Half': 2, 'force100Half': 4.
     cmm4NTPServerIp 1.3.6.1.4.1.161.19.3.6.2.13 ipaddress read-write
IP address for NTP server for CMM4 GPS Slave.
     sessionTimeout 1.3.6.1.4.1.161.19.3.6.2.14 integer read-write
Timer for Telnet, Web and FTP sessions.
     vlanEnable 1.3.6.1.4.1.161.19.3.6.2.15 integer read-write
To enable or disable VLAN tagging Enumeration: 'enable': 1, 'disable': 0.
     managementVID 1.3.6.1.4.1.161.19.3.6.2.16 integer read-write
Management VLAN VID
     siteInfoViewable 1.3.6.1.4.1.161.19.3.6.2.17 integer read-write
Enable non login users the ability to view Site Information Enumeration: 'enable': 1, 'disable': 0.
 cmm4Status 1.3.6.1.4.1.161.19.3.6.3
     cmm4PortStatusTable 1.3.6.1.4.1.161.19.3.6.3.1 no-access
A list of Live CMM 4 port status entries.
         cmm4PortStatusEntry 1.3.6.1.4.1.161.19.3.6.3.1.1 no-access
A CMM4 port entry containing port status.
             portStatusIndex 1.3.6.1.4.1.161.19.3.6.3.1.1.1 integer read-only
A unique value for each CMM port.
             cmm4PortPowerStatus 1.3.6.1.4.1.161.19.3.6.3.1.1.4 integer read-only
Port power status indicates power on, off or Power over Ethernet fault. Enumeration: 'on': 1, 'off': 0, 'powerOverEthernetFault': -1.
     deviceType 1.3.6.1.4.1.161.19.3.6.3.2 displaystring read-only
A textual string containing information about device type.
     cmm4pldVersion 1.3.6.1.4.1.161.19.3.6.3.3 displaystring read-only
Version of CMM4 PLD code.
     cmm4SoftwareVersion 1.3.6.1.4.1.161.19.3.6.3.4 displaystring read-only
CMM4 software version. It includes the operating system and software build time.
     cmm4SystemTime 1.3.6.1.4.1.161.19.3.6.3.5 displaystring read-only
The current time.
     cmm4UpTime 1.3.6.1.4.1.161.19.3.6.3.6 displaystring read-only
Time since last system reboot.
     satellitesVisible 1.3.6.1.4.1.161.19.3.6.3.7 displaystring read-only
Number of satellites the GPS sees.
     satellitesTracked 1.3.6.1.4.1.161.19.3.6.3.8 displaystring read-only
Current number of satellites that GPS actually tracks.
     latitude 1.3.6.1.4.1.161.19.3.6.3.9 displaystring read-only
CMM4 latitude.
     longitude 1.3.6.1.4.1.161.19.3.6.3.10 displaystring read-only
CMM4 longitude.
     height 1.3.6.1.4.1.161.19.3.6.3.11 displaystring read-only
The height of CMM4 unit.
     trackingMode 1.3.6.1.4.1.161.19.3.6.3.12 displaystring read-only
CMM4 GPS tracking mode.
     syncStatus 1.3.6.1.4.1.161.19.3.6.3.13 displaystring read-only
CMM4 GPS sync pulse status.
     cmm4MacAddress 1.3.6.1.4.1.161.19.3.6.3.14 whispmacaddress read-only
MAC address of the unit.
     cmm4ExtEthPwrStat 1.3.6.1.4.1.161.19.3.6.3.15 integer read-only
Current Live value of external Ethernet switch power. Enumeration: 'on': 1, 'off': 0.
     cmm4FPGAVersion 1.3.6.1.4.1.161.19.3.6.3.16 displaystring read-only
CMM4 FPGA Version.
     cmm4FPGAPlatform 1.3.6.1.4.1.161.19.3.6.3.17 displaystring read-only
CMM4 FPGA Revision.
     defaultStatus 1.3.6.1.4.1.161.19.3.6.3.18 integer read-only
Current Status of the Default Plug and switch. If either is active the next boot will be a default boot. 0: None, Default Plug not inserted, Default Switch not active 1: Plug inserted 2: Switch Active 3: Plug inserted and Switch active Enumeration: 'none': 0, 'defaultPlugInserted': 1, 'defaultSwitchActive': 2, 'defaultPlugInsertedAndDefaultSwitchActive': 3.
 cmm4Gps 1.3.6.1.4.1.161.19.3.6.4
     gpsTrackingMode 1.3.6.1.4.1.161.19.3.6.4.1 displaystring read-only
CMM4 GPS tracking mode.
     gpsTime 1.3.6.1.4.1.161.19.3.6.4.2 displaystring read-only
CMM4 GPS time.
     gpsDate 1.3.6.1.4.1.161.19.3.6.4.3 displaystring read-only
CMM4 GPS date.
     gpsSatellitesVisible 1.3.6.1.4.1.161.19.3.6.4.4 displaystring read-only
Number of satellites the GPS sees
     gpsSatellitesTracked 1.3.6.1.4.1.161.19.3.6.4.5 displaystring read-only
Current number of satellites GPS is tracking.
     gpsHeight 1.3.6.1.4.1.161.19.3.6.4.6 displaystring read-only
CMM4 height.
     gpsAntennaConnection 1.3.6.1.4.1.161.19.3.6.4.7 displaystring read-only
Antenna Connection status.
     gpsLatitude 1.3.6.1.4.1.161.19.3.6.4.8 displaystring read-only
CMM4 Latitude.
     gpsLongitude 1.3.6.1.4.1.161.19.3.6.4.9 displaystring read-only
CMM4 longitude.
     gpsInvalidMsg 1.3.6.1.4.1.161.19.3.6.4.10 displaystring read-only
Number of invalid messages.
     gpsRestartCount 1.3.6.1.4.1.161.19.3.6.4.11 integer read-only
Number of unit restarts.
     gpsReceiverInfo 1.3.6.1.4.1.161.19.3.6.4.12 displaystring read-only
A textual string contains information on GPS receiver.
     gpsSyncStatus 1.3.6.1.4.1.161.19.3.6.4.13 integer read-only
Current Live value of GPS Sync Status. Enumeration: 'syncOK': 1, 'noSync': 2.
     gpsSyncMasterSlave 1.3.6.1.4.1.161.19.3.6.4.14 integer read-only
Current Live value of GPS Sync Master/Slave Setting. Enumeration: 'cmmIsGPSSlave': 0, 'cmmIsGPSMaster': 1.
     gpsLog 1.3.6.1.4.1.161.19.3.6.4.15 eventstring read-only
GPS log. Includes times of sync detected and sync lost.
     gpsReInitCount 1.3.6.1.4.1.161.19.3.6.4.16 integer read-only
GPS ReInit counts. The number of times we have done a complete re-initialization of the GPS device.
 cmm4EventLog 1.3.6.1.4.1.161.19.3.6.5
     eventLog 1.3.6.1.4.1.161.19.3.6.5.1 eventstring read-only
CMM4 Event log.
     ntpLog 1.3.6.1.4.1.161.19.3.6.5.2 eventstring read-only
CMM4 NTP Log
 cmm4Controls 1.3.6.1.4.1.161.19.3.6.6
     cmm4Reboot 1.3.6.1.4.1.161.19.3.6.6.1 integer read-write
Setting the variable to 1 will reboot the unit. When the unit finishes rebooting, it will be in finishedReboot state. Enumeration: 'finishedReboot': 0, 'reboot': 1.
     cmm4ClearEventLog 1.3.6.1.4.1.161.19.3.6.6.2 integer read-write
Setting the variable to 1 will clear the event log. Enumeration: 'clear': 1, 'notClear': 0.
     cmm4RebootIfRequired 1.3.6.1.4.1.161.19.3.6.6.3 integer read-write
Setting this to 1 will reboot the CMM4 IF and ONLY IF it is required due to configuration updates. If a reboot is NOT required, setting this value to 1 will have no affect. If a reboot IS required, setting this value to 1 will reboot the CMM. Writing 0 has no affect. Enumeration: 'rebootcomplete': 0, 'rebootifrquired': 1.
 cmm4Snmp 1.3.6.1.4.1.161.19.3.6.7
     cmm4SnmpComString 1.3.6.1.4.1.161.19.3.6.7.1 displaystring read-write
SNMP Community String
     cmm4SnmpAccessSubnet 1.3.6.1.4.1.161.19.3.6.7.2 displaystring read-write
SNMP Accessing Subnet. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpTrapIp1 1.3.6.1.4.1.161.19.3.6.7.3 ipaddress read-write
SNMP Trap IP 1.
     cmm4SnmpTrapIp2 1.3.6.1.4.1.161.19.3.6.7.4 ipaddress read-write
SNMP Trap IP 2.
     cmm4SnmpTrapIp3 1.3.6.1.4.1.161.19.3.6.7.5 ipaddress read-write
SNMP Trap IP 3.
     cmm4SnmpTrapIp4 1.3.6.1.4.1.161.19.3.6.7.6 ipaddress read-write
SNMP Trap IP 4.
     cmm4SnmpTrapIp5 1.3.6.1.4.1.161.19.3.6.7.7 ipaddress read-write
SNMP Trap IP 5.
     cmm4SnmpTrapIp6 1.3.6.1.4.1.161.19.3.6.7.8 ipaddress read-write
SNMP Trap IP 6.
     cmm4SnmpTrapIp7 1.3.6.1.4.1.161.19.3.6.7.9 ipaddress read-write
SNMP Trap IP 7.
     cmm4SnmpTrapIp8 1.3.6.1.4.1.161.19.3.6.7.10 ipaddress read-write
SNMP Trap IP 8.
     cmm4SnmpTrapIp9 1.3.6.1.4.1.161.19.3.6.7.11 ipaddress read-write
SNMP Trap IP 9.
     cmm4SnmpTrapIp10 1.3.6.1.4.1.161.19.3.6.7.12 ipaddress read-write
SNMP Trap IP 10.
     cmm4SnmpReadOnly 1.3.6.1.4.1.161.19.3.6.7.13 integer read-write
SNMP Permissions 1 - Read Only 0 - Read/Write. Enumeration: 'readOnlyPermissions': 1, 'readWritePermissions': 0.
     cmm4SnmpGPSSyncTrapEnable 1.3.6.1.4.1.161.19.3.6.7.14 integer read-write
Variable to enable/disable GPS sync/out-sync traps. Enumeration: 'gpsSyncTrapEnabled': 1, 'gpsSyncTrapDisabled': 0.
     cmm4SnmpAccessSubnet2 1.3.6.1.4.1.161.19.3.6.7.15 displaystring read-write
SNMP Accessing Subnet 2. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpAccessSubnet3 1.3.6.1.4.1.161.19.3.6.7.16 displaystring read-write
SNMP Accessing Subnet 3. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpAccessSubnet4 1.3.6.1.4.1.161.19.3.6.7.17 displaystring read-write
SNMP Accessing Subnet 4. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpAccessSubnet5 1.3.6.1.4.1.161.19.3.6.7.18 displaystring read-write
SNMP Accessing Subnet 5. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpAccessSubnet6 1.3.6.1.4.1.161.19.3.6.7.19 displaystring read-write
SNMP Accessing Subnet 6. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpAccessSubnet7 1.3.6.1.4.1.161.19.3.6.7.20 displaystring read-write
SNMP Accessing Subnet 7. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpAccessSubnet8 1.3.6.1.4.1.161.19.3.6.7.21 displaystring read-write
SNMP Accessing Subnet 8. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpAccessSubnet9 1.3.6.1.4.1.161.19.3.6.7.22 displaystring read-write
SNMP Accessing Subnet 9. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
     cmm4SnmpAccessSubnet10 1.3.6.1.4.1.161.19.3.6.7.23 displaystring read-write
SNMP Accessing Subnet 10. In x.x.x.x/y form where x.x.x.x is network and y is mask length.
 cmm4Event 1.3.6.1.4.1.161.19.3.6.8
     cmm4GPSEvent 1.3.6.1.4.1.161.19.3.6.8.1
         cmm4GPSInSync 1.3.6.1.4.1.161.19.3.6.8.1.1
Signals a transition from No Sync to Sync OK.
         cmm4GPSNoSync 1.3.6.1.4.1.161.19.3.6.8.1.2
Signals a transition from Sync OK to No Sync.
 cmm4UserTable 1.3.6.1.4.1.161.19.3.6.9 no-access
User information table.
     cmm4UserEntry 1.3.6.1.4.1.161.19.3.6.9.1 no-access
User entry.
         entryIndex 1.3.6.1.4.1.161.19.3.6.9.1.1 integer read-only
User information table index.
         userLoginName 1.3.6.1.4.1.161.19.3.6.9.1.2 displaystring read-only
User name.
         userPswd 1.3.6.1.4.1.161.19.3.6.9.1.3 displaystring read-only
User password.
         accessLevel 1.3.6.1.4.1.161.19.3.6.9.1.4 integer read-only
User access level. Enumeration: 'administrator': 3, 'guest': 1, 'engineering': 5, 'technician': 4, 'installer': 2, 'noAdmin': 0.