CMM3-MIB: View SNMP OID List / Download MIB

VENDOR: MOTOROLA


 Home MIB: CMM3-MIB
Download as:   
SNMPv2-CONF, WHISP-GLOBAL-REG-MIB, SNMPv2-SMI, WHISP-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cmmIIIMibModule 1.3.6.1.4.1.161.19.1.1.15
This module contains CMM3 MIB definitions.
 cmmGroups 1.3.6.1.4.1.161.19.3.4.1
     cmmSwitchGroup 1.3.6.1.4.1.161.19.3.4.1.1
CMMIII switch group.
     cmmConfigGroup 1.3.6.1.4.1.161.19.3.4.1.2
CMMIII configuration group.
     cmmStatusGroup 1.3.6.1.4.1.161.19.3.4.1.3
CMMIII configuration group.
     cmmGPSGroup 1.3.6.1.4.1.161.19.3.4.1.4
CMMIII GPS status group.
 cmmSwitch 1.3.6.1.4.1.161.19.3.4.2
     cmmSwitchTable 1.3.6.1.4.1.161.19.3.4.2.1 no-access
Table of CMM MIB counters
         cmmSwitchEntry 1.3.6.1.4.1.161.19.3.4.2.1.1 no-access
CMM MIB counters
             portNumber 1.3.6.1.4.1.161.19.3.4.2.1.1.1 integer read-only
A unique value for each CMM port. Its value starts from 1.
             rxDropPkts 1.3.6.1.4.1.161.19.3.4.2.1.1.2 counter32 read-only
The number of good packets received by a port that were dropped due to lack of resources(e.g., lack of input buffers)or were dropped due to lack of resources before a determination of the validity of the packet was able to be made (e.g., receive FIFO overflow). The counter is only incremented if the receive error was not counted by either the RxExcessSizeDisc, the RxAlignmentErrors or the RxRCSErrors counters.
             rxOctets 1.3.6.1.4.1.161.19.3.4.2.1.1.3 counter64 read-only
The number of bytes of data received by a port (excluding preamble but including FCS), including bad packets.
             rxBroadcastPkts 1.3.6.1.4.1.161.19.3.4.2.1.1.4 counter32 read-only
The number of good packets received by a port that are directed to the broadcast address. This counter does not include error broadcast packets or valid multicast packets.
             rxMulticastPkts 1.3.6.1.4.1.161.19.3.4.2.1.1.5 counter32 read-only
The number of good packets received by a port that are directed to the multicast address. This counter does not include error multicast packets or valid broadcast packets.
             rxSAChanges 1.3.6.1.4.1.161.19.3.4.2.1.1.6 counter32 read-only
The number of times the SA of good receive packets has changed from the previous value. A count greater than 1 generally indicates the port if connected to a repeater based network.
             rxUndersizePkts 1.3.6.1.4.1.161.19.3.4.2.1.1.7 counter32 read-only
The number of good packets received by a port that are less than 64 bytes long (excluding framing bits but including the FCS).
             rxOversizePkts 1.3.6.1.4.1.161.19.3.4.2.1.1.8 counter32 read-only
The number of good packets received by a port that are greater than 1522 bytes inclusive (excluding framing bits but including the FCS). Note that this counter alone will be incremented for packets in the range 1523-1536 bytes inclusive, whereas both this counter and the RxExcessSizeDisc counter will be incremented for packets of 1537 bytes and higher.
             rxFragments 1.3.6.1.4.1.161.19.3.4.2.1.1.9 counter32 read-only
The number of packets received by a port that are less than 64 bytes(excluding framing bits) and have either an FCS error or an alignment error.
             rxJabbers 1.3.6.1.4.1.161.19.3.4.2.1.1.10 counter32 read-only
The number of packets received by a port that are longer than 1522 bytes and have either an FCS error or an alignment error.
             rxUnicastPkts 1.3.6.1.4.1.161.19.3.4.2.1.1.11 counter32 read-only
The number of good packets received by a port that are addressed to a unicast address.
             rxAlignmentErrors 1.3.6.1.4.1.161.19.3.4.2.1.1.12 counter32 read-only
The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 1522 bytes, inclusive, and have a bad FCS with a non-integral number of bytes.
             rxFCSErrors 1.3.6.1.4.1.161.19.3.4.2.1.1.13 counter32 read-only
The number of packets received by a port that have a length (excluding framing bits but including FCS) between 64 and 152 bytes, and have a bad FCS with an integral number of bytes.
             rxGoodOctets 1.3.6.1.4.1.161.19.3.4.2.1.1.14 counter64 read-only
The total number of bytes in all good packets received by a port (excluding framing bits but including FCS).
             rxExcessSizeDisc 1.3.6.1.4.1.161.19.3.4.2.1.1.15 counter32 read-only
The number of good packets received by a port that are greater than 1536 bytes (excluding framing bits but including FCS) and were discarded due to excessive length. Note that the RxOversizePkts counter alone is incremented for packets in the range of 1523-1536 bytes inclusive, whereas both this counter and the RxOversizePkts are incremented for packets of 1537 bytes and higher.
             rxPausePkts 1.3.6.1.4.1.161.19.3.4.2.1.1.16 counter32 read-only
The number of PAUSE frame received by a port. The PAUSE frame must have a valid MAC Control Frame EtherType field (88-08h), have a destination MAC address of either the MAC Control frame reserved multicast address(01-80-c2-00-00-011) or the unique MAC address associated with the specific port, a valid PAUSE Opcode (00-01), be a minimum of 64 bytes in length (excluding preamble but including FCS), and have a valid CRC. Although an 802.3 compliant MAC is only permitted to transmit PAUSE frames when in full duplex mode, with flow control enabled, and with the transfer of PAUSE frames determined by the result of auto-negotiation, an 802.3 MAC receiver is required to count all received PAUSE frames, regardless of its half/full-duplex status. An indication that a MAC is in half-duplex with the RxPausePkts incrementing indicates a non-compliant transmitting device on the network.
             rxSymbolErrors 1.3.6.1.4.1.161.19.3.4.2.1.1.17 counter32 read-only
The total number of times a valid length packet was received at a port and at least one invalid data symbol was detected. Counter only increment once per carrier event and does not increment on detection of collision during the carrier event.
             txDropPkts 1.3.6.1.4.1.161.19.3.4.2.1.1.18 counter32 read-only
This counter is incremented every time a transmit packet is dropped due to lack of resources (e.g., transmit FIFO underflow), or an internal MAC sublayer transmit error not counted by in either the TxLateCollision or the TxExcessiveCollision counters.
             txOctets 1.3.6.1.4.1.161.19.3.4.2.1.1.19 counter64 read-only
The total number of good bytes of data transmitted by a port (excluding preamble but including FCS).
             txBroadcastPkts 1.3.6.1.4.1.161.19.3.4.2.1.1.20 counter32 read-only
The number of good packets transmitted by a port that are directed to a broadcast address. This counter does not include errored broadcast packets or valid multicast packets.
             txMulticastPkts 1.3.6.1.4.1.161.19.3.4.2.1.1.21 counter32 read-only
The number of good packets transmitted by a port that are directed to a multicast address. This counter does not include errored multicast packets or valid broadcast packets.
             txCollisions 1.3.6.1.4.1.161.19.3.4.2.1.1.22 counter32 read-only
The number of collision experienced by a port during packet transmissions.
             txUnicastPkts 1.3.6.1.4.1.161.19.3.4.2.1.1.23 counter32 read-only
The number of good packets transmitted by a port that are addressed to a unicast address.
             txSingleCollision 1.3.6.1.4.1.161.19.3.4.2.1.1.24 counter32 read-only
The number packets successfully transmitted by a port that experienced exactly one collision.
             txMultipleCollision 1.3.6.1.4.1.161.19.3.4.2.1.1.25 counter32 read-only
The number packets successfully transmitted by a port that experienced more than one collision.
             txDeferredTransmit 1.3.6.1.4.1.161.19.3.4.2.1.1.26 counter32 read-only
The number packets successfully transmitted by a port for which the first transmission attempt is delayed because medium is busy.
             txLateCollision 1.3.6.1.4.1.161.19.3.4.2.1.1.27 counter32 read-only
The number of times that a collision is detected later than 512 bit-times into the transmission of a packet.
             txExcessiveCollision 1.3.6.1.4.1.161.19.3.4.2.1.1.28 counter32 read-only
The number of packets that are not transmitted from a port because the packet experienced 16 transmission attempts.
             txPausePkts 1.3.6.1.4.1.161.19.3.4.2.1.1.29 counter32 read-only
The number of PAUSE frame transmitted by a port. The MAC resolve to full duplex mode, with 803.3x flow control PAUSE frame exchange enabled at the completion of auto-negotiation.
             txFrameInDisc 1.3.6.1.4.1.161.19.3.4.2.1.1.30 counter32 read-only
The number of valid packets received which are discarded by the forwarding process due to lack of space on an output queue. Note: not maintained or reported in the MIB counters. Located in Congestion registers. This attribute only increments if a network device is not acting in compliance with a flow control request, or the BCM5327M internal flow control/buffering scheme has been misconfigured.
             pkts64Octets 1.3.6.1.4.1.161.19.3.4.2.1.1.31 counter32 read-only
The number of packets (including error packets) that are 64 bytes long.
             pkts65to127Octets 1.3.6.1.4.1.161.19.3.4.2.1.1.32 counter32 read-only
The number of packets (including error packets) that are between 65 and 127 bytes long.
             pkts128to255Octets 1.3.6.1.4.1.161.19.3.4.2.1.1.33 counter32 read-only
The number of packets (including error packets) that are between 128 and 255 bytes long.
             pkts256to511Octets 1.3.6.1.4.1.161.19.3.4.2.1.1.34 counter32 read-only
The number of packets (including error packets) that are between 256 and 511 bytes long.
             pkts512to1023Octets 1.3.6.1.4.1.161.19.3.4.2.1.1.35 counter32 read-only
The number of packets (including error packets) that are between 512 and 1023 bytes long.
             pkts1024to1522Octets 1.3.6.1.4.1.161.19.3.4.2.1.1.36 counter32 read-only
The number of packets (including error packets) that are between 1024 and 1522 bytes long.
 cmmConfig 1.3.6.1.4.1.161.19.3.4.3
     gpsTimingPulse 1.3.6.1.4.1.161.19.3.4.3.1 integer read-write
(1) -- Master. (0) -- Slave. Enumeration: 'slave': 0, 'master': 1.
     lan1Ip 1.3.6.1.4.1.161.19.3.4.3.2 ipaddress read-write
LAN 1 IP.
     lan1SubnetMask 1.3.6.1.4.1.161.19.3.4.3.3 ipaddress read-write
LAN 1 subnet mask.
     defaultGateWay 1.3.6.1.4.1.161.19.3.4.3.4 ipaddress read-write
Default gateway
     port1PowerCtr 1.3.6.1.4.1.161.19.3.4.3.5 integer read-write
Power control for port 1. (1) -- Power on. (0) -- Power off. Enumeration: 'on': 1, 'off': 0.
     port2PowerCtr 1.3.6.1.4.1.161.19.3.4.3.6 integer read-write
Power control for port 2. (1) -- Power on. (0) -- Power off. Enumeration: 'on': 1, 'off': 0.
     port3PowerCtr 1.3.6.1.4.1.161.19.3.4.3.7 integer read-write
Power control for port 3. (1) -- Power on. (0) -- Power off. Enumeration: 'on': 1, 'off': 0.
     port4PowerCtr 1.3.6.1.4.1.161.19.3.4.3.8 integer read-write
Power control for port 4. (1) -- Power on. (0) -- Power off. Enumeration: 'on': 1, 'off': 0.
     port5PowerCtr 1.3.6.1.4.1.161.19.3.4.3.9 integer read-write
Power control for port 5. (1) -- Power on. (0) -- Power off. Enumeration: 'on': 1, 'off': 0.
     port6PowerCtr 1.3.6.1.4.1.161.19.3.4.3.10 integer read-write
Power control for port 6. (1) -- Power on. (0) -- Power off. Enumeration: 'on': 1, 'off': 0.
     port7PowerCtr 1.3.6.1.4.1.161.19.3.4.3.11 integer read-write
Power control for port 7. (1) -- Power on. (0) -- Power off. Enumeration: 'on': 1, 'off': 0.
     port8PowerCtr 1.3.6.1.4.1.161.19.3.4.3.12 integer read-write
Power control for port 8. (1) -- Power on. (0) -- Power off. Enumeration: 'on': 1, 'off': 0.
     displayOnlyAccess 1.3.6.1.4.1.161.19.3.4.3.13 displaystring read-write
Display only access to web interface and telnet.
     fullAccess 1.3.6.1.4.1.161.19.3.4.3.14 displaystring read-write
Full access password to web interface and telnet.
     displayOnlyStatus 1.3.6.1.4.1.161.19.3.4.3.15 displaystring read-only
Display only password status.
     fullAccessStatus 1.3.6.1.4.1.161.19.3.4.3.16 displaystring read-only
Full access password status.
     webAutoUpdate 1.3.6.1.4.1.161.19.3.4.3.17 integer read-write
Web page auto update in seconds. 0 means disabled.
     port1Config 1.3.6.1.4.1.161.19.3.4.3.18 integer read-write
Link speed configuration on port 1. Enumeration: 'auto': 1, 'hundredHDX': 3, 'tenFDX': 4, 'hundredFDX': 2, 'tenHDX': 5.
     port2Config 1.3.6.1.4.1.161.19.3.4.3.19 integer read-write
Link speed configuration on port 2. Enumeration: 'auto': 1, 'hundredHDX': 3, 'tenFDX': 4, 'hundredFDX': 2, 'tenHDX': 5.
     port3Config 1.3.6.1.4.1.161.19.3.4.3.20 integer read-write
Link speed configuration on port 3. Enumeration: 'auto': 1, 'hundredHDX': 3, 'tenFDX': 4, 'hundredFDX': 2, 'tenHDX': 5.
     port4Config 1.3.6.1.4.1.161.19.3.4.3.21 integer read-write
Link speed configuration on port 4. Enumeration: 'auto': 1, 'hundredHDX': 3, 'tenFDX': 4, 'hundredFDX': 2, 'tenHDX': 5.
     port5Config 1.3.6.1.4.1.161.19.3.4.3.22 integer read-write
Link speed configuration on port 5. Enumeration: 'auto': 1, 'hundredHDX': 3, 'tenFDX': 4, 'hundredFDX': 2, 'tenHDX': 5.
     port6Config 1.3.6.1.4.1.161.19.3.4.3.23 integer read-write
Link speed configuration on port 6. Enumeration: 'auto': 1, 'hundredHDX': 3, 'tenFDX': 4, 'hundredFDX': 2, 'tenHDX': 5.
     port7Config 1.3.6.1.4.1.161.19.3.4.3.24 integer read-write
Link speed configuration on port 7. Enumeration: 'auto': 1, 'hundredHDX': 3, 'tenFDX': 4, 'hundredFDX': 2, 'tenHDX': 5.
     port8Config 1.3.6.1.4.1.161.19.3.4.3.25 integer read-write
Link speed configuration on port 8. Enumeration: 'auto': 1, 'hundredHDX': 3, 'tenFDX': 4, 'hundredFDX': 2, 'tenHDX': 5.
     port1Description 1.3.6.1.4.1.161.19.3.4.3.26 displaystring read-write
Port 1 text description.
     port2Description 1.3.6.1.4.1.161.19.3.4.3.27 displaystring read-write
Port 2 text description.
     port3Description 1.3.6.1.4.1.161.19.3.4.3.28 displaystring read-write
Port 3 text description.
     port4Description 1.3.6.1.4.1.161.19.3.4.3.29 displaystring read-write
Port 4 text description.
     port5Description 1.3.6.1.4.1.161.19.3.4.3.30 displaystring read-write
Port 5 text description.
     port6Description 1.3.6.1.4.1.161.19.3.4.3.31 displaystring read-write
Port 6 text description.
     port7Description 1.3.6.1.4.1.161.19.3.4.3.32 displaystring read-write
Port 7 text description.
     port8Description 1.3.6.1.4.1.161.19.3.4.3.33 displaystring read-write
Port 8 text description.
     snmpTrap1 1.3.6.1.4.1.161.19.3.4.3.34 ipaddress read-write
SNMP Trap Address 1.
     snmpTrap2 1.3.6.1.4.1.161.19.3.4.3.35 ipaddress read-write
SNMP Trap Address 2.
     snmpTrap3 1.3.6.1.4.1.161.19.3.4.3.36 ipaddress read-write
SNMP Trap Address 3.
     snmpTrap4 1.3.6.1.4.1.161.19.3.4.3.37 ipaddress read-write
SNMP Trap Address 4.
     snmpTrap5 1.3.6.1.4.1.161.19.3.4.3.38 ipaddress read-write
SNMP Trap Address 5.
     snmpTrap6 1.3.6.1.4.1.161.19.3.4.3.39 ipaddress read-write
SNMP Trap Address 6.
     snmpTrap7 1.3.6.1.4.1.161.19.3.4.3.40 ipaddress read-write
SNMP Trap Address 7.
     snmpTrap8 1.3.6.1.4.1.161.19.3.4.3.41 ipaddress read-write
SNMP Trap Address 8.
     snmpTrap9 1.3.6.1.4.1.161.19.3.4.3.42 ipaddress read-write
SNMP Trap Address 9.
     snmpTrap10 1.3.6.1.4.1.161.19.3.4.3.43 ipaddress read-write
SNMP Trap Address 10.
     vlanTagEnable 1.3.6.1.4.1.161.19.3.4.3.44 integer read-write
Enable/Disable 802.1Q VLAN tagging.P (1) -- Enable Tagging. (0) -- Disable Tagging. Enumeration: 'on': 1, 'off': 0.
     vlanTagId 1.3.6.1.4.1.161.19.3.4.3.45 integer read-write
802.1q VLAN Tag ID, 1-4095.
     port1Uplink 1.3.6.1.4.1.161.19.3.4.3.46 integer read-write
Configure Port 1 as Uplink Port. (1) -- Port 1 is an uplink port. (0) -- Port 1 is not an uplink port. Enumeration: 'on': 1, 'off': 0.
     port2Uplink 1.3.6.1.4.1.161.19.3.4.3.47 integer read-write
Configure Port 2 as Uplink Port. (1) -- Port 2 is an uplink port. (0) -- Port 2 is not an uplink port. Enumeration: 'on': 1, 'off': 0.
     port3Uplink 1.3.6.1.4.1.161.19.3.4.3.48 integer read-write
Configure Port 3 as Uplink Port. (1) -- Port 3 is an uplink port. (0) -- Port 3 is not an uplink port. Enumeration: 'on': 1, 'off': 0.
     port4Uplink 1.3.6.1.4.1.161.19.3.4.3.49 integer read-write
Configure Port 4 as Uplink Port. (1) -- Port 4 is an uplink port. (0) -- Port 4 is not an uplink port. Enumeration: 'on': 1, 'off': 0.
     port5Uplink 1.3.6.1.4.1.161.19.3.4.3.50 integer read-write
Configure Port 5 as Uplink Port. (1) -- Port 5 is an uplink port. (0) -- Port 5 is not an uplink port. Enumeration: 'on': 1, 'off': 0.
     port6Uplink 1.3.6.1.4.1.161.19.3.4.3.51 integer read-write
Configure Port 6 as Uplink Port. (1) -- Port 6 is an uplink port. (0) -- Port 6 is not an uplink port. Enumeration: 'on': 1, 'off': 0.
     port7Uplink 1.3.6.1.4.1.161.19.3.4.3.52 integer read-write
Configure Port 7 as Uplink Port. (1) -- Port 7 is an uplink port. (0) -- Port 7 is not an uplink port. Enumeration: 'on': 1, 'off': 0.
     port8Uplink 1.3.6.1.4.1.161.19.3.4.3.53 integer read-write
Configure Port 8 as Uplink Port. (1) -- Port 8 is an uplink port. (0) -- Port 8 is not an uplink port. Enumeration: 'on': 1, 'off': 0.
     rebootIfRequired 1.3.6.1.4.1.161.19.3.4.3.54 integer read-write
Reboot CMM if required. (1) -- Check if CMM reboot is required and do so. (0) -- Do not check for reboot. Enumeration: 'on': 1, 'off': 0.
     port1VlanConf 1.3.6.1.4.1.161.19.3.4.3.55 integer read-write
Port 1 VLAN Port Configuration. Bitmap determines which Port(s) Port 1 will egress data. 0 means no ports, 2 means port 2, 6 means ports 2 and 3, etc.
     port2VlanConf 1.3.6.1.4.1.161.19.3.4.3.56 integer read-write
Port 2 VLAN Port Configuration. Bitmap determines which Port(s) Port 2 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
     port3VlanConf 1.3.6.1.4.1.161.19.3.4.3.57 integer read-write
Port 3 VLAN Port Configuration. Bitmap determines which Port(s) Port 3 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
     port4VlanConf 1.3.6.1.4.1.161.19.3.4.3.58 integer read-write
Port 4 VLAN Port Configuration. Bitmap determines which Port(s) Port 4 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
     port5VlanConf 1.3.6.1.4.1.161.19.3.4.3.59 integer read-write
Port 5 VLAN Port Configuration. Bitmap determines which Port(s) Port 5 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
     port6VlanConf 1.3.6.1.4.1.161.19.3.4.3.60 integer read-write
Port 6 VLAN Port Configuration. Bitmap determines which Port(s) Port 6 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
     port7VlanConf 1.3.6.1.4.1.161.19.3.4.3.61 integer read-write
Port 7 VLAN Port Configuration. Bitmap determines which Port(s) Port 7 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
     port8VlanConf 1.3.6.1.4.1.161.19.3.4.3.62 integer read-write
Port 8 VLAN Port Configuration. Bitmap determines which Port(s) Port 8 will egress data. 0 means no ports, 1 means port 1, 3 means ports 1 and 2, etc.
     port1PwrReset 1.3.6.1.4.1.161.19.3.4.3.63 integer read-write
If Port 1 is Powered, attched device will be reset when set to 1. If Port 1 is Not Powered, nothing will happen.
     port2PwrReset 1.3.6.1.4.1.161.19.3.4.3.64 integer read-write
If Port 2 is Powered, attched device will be reset when set to 1. If Port 2 is Not Powered, nothing will happen.
     port3PwrReset 1.3.6.1.4.1.161.19.3.4.3.65 integer read-write
If Port 3 is Powered, attched device will be reset when set to 1. If Port 3 is Not Powered, nothing will happen.
     port4PwrReset 1.3.6.1.4.1.161.19.3.4.3.66 integer read-write
If Port 4 is Powered, attched device will be reset when set to 1. If Port 4 is Not Powered, nothing will happen.
     port5PwrReset 1.3.6.1.4.1.161.19.3.4.3.67 integer read-write
If Port 5 is Powered, attched device will be reset when set to 1. If Port 5 is Not Powered, nothing will happen.
     port6PwrReset 1.3.6.1.4.1.161.19.3.4.3.68 integer read-write
If Port 6 is Powered, attched device will be reset when set to 1. If Port 6 is Not Powered, nothing will happen.
     port7PwrReset 1.3.6.1.4.1.161.19.3.4.3.69 integer read-write
If Port 7 is Powered, attched device will be reset when set to 1. If Port 7 is Not Powered, nothing will happen.
     port8PwrReset 1.3.6.1.4.1.161.19.3.4.3.70 integer read-write
If Port 8 is Powered, attched device will be reset when set to 1. If Port 8 is Not Powered, nothing will happen.
 cmmStatus 1.3.6.1.4.1.161.19.3.4.4
     cmmPortTable 1.3.6.1.4.1.161.19.3.4.4.1 no-access
A list of CMM III port entries.
         cmmPortEntry 1.3.6.1.4.1.161.19.3.4.4.1.1 no-access
A CMM port entry containing objects with port status.
             portIndex 1.3.6.1.4.1.161.19.3.4.4.1.1.1 integer read-only
A unique value for each CMM port.
             linkStatus 1.3.6.1.4.1.161.19.3.4.4.1.1.2 integer read-only
The current operational state of the port. Enumeration: 'on': 1, 'off': 0.
             linkSpeed 1.3.6.1.4.1.161.19.3.4.4.1.1.3 integer read-only
Network connectivity, 100BaseT or 10BaseT. Enumeration: 'hundredBaseT': 1, 'tenBaseT': 0.
             duplexStatus 1.3.6.1.4.1.161.19.3.4.4.1.1.4 integer read-only
Half-duplex data transmission or Full-duplex data transmission. Enumeration: 'fullDuplex': 1, 'halfDuplex': 0.
             powerStatus 1.3.6.1.4.1.161.19.3.4.4.1.1.5 integer read-only
Port power status indicates power on or power off. Enumeration: 'on': 1, 'off': 0.
             uplinkStatus 1.3.6.1.4.1.161.19.3.4.4.1.1.6 integer read-only
Port Uplink status indicates whether port is configred as an Uplink Port. Enumeration: 'on': 1, 'off': 0.
     deviceType 1.3.6.1.4.1.161.19.3.4.4.2 displaystring read-only
A textual string containing information about device type.
     pldVersion 1.3.6.1.4.1.161.19.3.4.4.3 displaystring read-only
Version of PLD code.
     softwareVersion 1.3.6.1.4.1.161.19.3.4.4.4 displaystring read-only
CMM-III software version. It includes the operation system and software build time.
     systemTime 1.3.6.1.4.1.161.19.3.4.4.5 displaystring read-only
The current time.
     upTime 1.3.6.1.4.1.161.19.3.4.4.6 displaystring read-only
Time since last system reboot.
     satellitesVisible 1.3.6.1.4.1.161.19.3.4.4.7 displaystring read-only
Number of satellites the GPS should see.
     satellitesTracked 1.3.6.1.4.1.161.19.3.4.4.8 displaystring read-only
Current number of satellites that GPS actually tracks.
     latitude 1.3.6.1.4.1.161.19.3.4.4.9 displaystring read-only
CMM-III latitude.
     longitude 1.3.6.1.4.1.161.19.3.4.4.10 displaystring read-only
CMM-III longitude.
     height 1.3.6.1.4.1.161.19.3.4.4.11 displaystring read-only
The height of CMM-III unit.
     trackingMode 1.3.6.1.4.1.161.19.3.4.4.12 displaystring read-only
CMM-III GPS tracking mode.
     syncStatus 1.3.6.1.4.1.161.19.3.4.4.13 displaystring read-only
CMM-III GPS sync pulse status.
     macAddress 1.3.6.1.4.1.161.19.3.4.4.14 displaystring read-only
MAC address of the unit.
 cmmGps 1.3.6.1.4.1.161.19.3.4.5
     gpsTrackingMode 1.3.6.1.4.1.161.19.3.4.5.1 displaystring read-only
CMM-III GPS tracking mode.
     gpsTime 1.3.6.1.4.1.161.19.3.4.5.2 displaystring read-only
CMM-III GPS time.
     gpsDate 1.3.6.1.4.1.161.19.3.4.5.3 displaystring read-only
CMM-III GPS date.
     gpsSatellitesVisible 1.3.6.1.4.1.161.19.3.4.5.4 displaystring read-only
Number of satellites the GPS is supposed to see.
     gpsSatellitesTracked 1.3.6.1.4.1.161.19.3.4.5.5 displaystring read-only
Current number of satellites GPS tracked.
     gpsHeight 1.3.6.1.4.1.161.19.3.4.5.6 displaystring read-only
CMM height.
     gpsAntennaConnection 1.3.6.1.4.1.161.19.3.4.5.7 displaystring read-only
Antenna Connection status.
     gpsLatitude 1.3.6.1.4.1.161.19.3.4.5.8 displaystring read-only
CMM Latitude.
     gpsLongitude 1.3.6.1.4.1.161.19.3.4.5.9 displaystring read-only
CMM longitude.
     gpsInvalidMsg 1.3.6.1.4.1.161.19.3.4.5.10 displaystring read-only
Number of invalid messages.
     gpsRestartCount 1.3.6.1.4.1.161.19.3.4.5.11 integer read-only
Number of unit restart.
     gpsReceiverInfo 1.3.6.1.4.1.161.19.3.4.5.12 displaystring read-only
A textual string contains information on GPS receiver.
 cmmEventLog 1.3.6.1.4.1.161.19.3.4.6
     eventLog 1.3.6.1.4.1.161.19.3.4.6.1 eventstring read-only
CMM Event log.
 cmmControls 1.3.6.1.4.1.161.19.3.4.7
     reboot 1.3.6.1.4.1.161.19.3.4.7.1 integer read-write
Setting the variable to 1 will reboot the unit. When the unit finishs rebooting, it will be in finishedReboot state. Enumeration: 'finishedReboot': 0, 'reboot': 1.
     clearEventLog 1.3.6.1.4.1.161.19.3.4.7.2 integer read-write
Setting the variable to 1 will clear the event log. Enumeration: 'clear': 1, 'notClear': 0.