CM-SECURITY-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: CM-SECURITY-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, SNMP-USER-BASED-SM-MIB, CM-COMMON-MIB, ADVA-MIB, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cmSecurityMIB 1.3.6.1.4.1.2544.1.12.10
This module defines the Security MIB definitions used by the F3 (FSP150CM/CC) product lines. These are used to manage the user/authentication for CLI/GUI sessions. Copyright (C) ADVA Optical Networking.
       cmSecurityObjects 1.3.6.1.4.1.2544.1.12.10.1
           cmAuthProtocol 1.3.6.1.4.1.2544.1.12.10.1.1 cmremoteauthprotocol read-write
Remote user authentication protocol.
           cmAccessOrder 1.3.6.1.4.1.2544.1.12.10.1.2 cmsecurityaccessorder read-write
Order of access for security, i.e. try 'local' first or 'remote' first.
           cmAuthType 1.3.6.1.4.1.2544.1.12.10.1.3 cmsecurityauthtype read-write
In case of remote authentication, the chosen protocol.
           cmNASIpAddress 1.3.6.1.4.1.2544.1.12.10.1.4 ipaddress read-write
In case of remote authentication RADIUS, the Network Access Server's IP Address.
           cmSecurityUserTable 1.3.6.1.4.1.2544.1.12.10.1.5 no-access
A list of entries corresponding to the security users. Entries cannot be created in this table by management application action.
               cmSecurityUserEntry 1.3.6.1.4.1.2544.1.12.10.1.5.1 no-access
An entry containing information applicable to a particular security user.
                   cmSecurityUserName 1.3.6.1.4.1.2544.1.12.10.1.5.1.1 displaystring read-only
Security User Name.
                   cmSecurityUserComment 1.3.6.1.4.1.2544.1.12.10.1.5.1.2 displaystring read-only
Notes on Security User.
                   cmSecurityUserPrivLevel 1.3.6.1.4.1.2544.1.12.10.1.5.1.3 cmsecurityprivlevel read-only
Security User Privilege Level.
                   cmSecurityUserLoginTimeout 1.3.6.1.4.1.2544.1.12.10.1.5.1.4 integer32 read-only
Security User Login Timeout.
                   cmSecurityUserNumFailedLoginAttempts 1.3.6.1.4.1.2544.1.12.10.1.5.1.5 integer32 read-only
Security User Number of Failed Login Attempts.
                   cmSecurityUserLastLoginTime 1.3.6.1.4.1.2544.1.12.10.1.5.1.6 dateandtime read-only
Security User Last Login Time.
                   cmSecurityUserLockedout 1.3.6.1.4.1.2544.1.12.10.1.5.1.7 truthvalue read-only
Whether the security user has been locked out.
                   cmSecurityUserLastLockedoutTime 1.3.6.1.4.1.2544.1.12.10.1.5.1.8 dateandtime read-only
Security User Last Locked out Time.
                   cmSecurityUserCliPagingEnable 1.3.6.1.4.1.2544.1.12.10.1.5.1.9 truthvalue read-only
Whether the security user has CLI paging enabled.
                   cmSecurityUserRemoteUser 1.3.6.1.4.1.2544.1.12.10.1.5.1.10 truthvalue read-only
Whether the security user is a remote user.
                   cmSecurityUserPassword 1.3.6.1.4.1.2544.1.12.10.1.5.1.11 displaystring read-only
Password of the security user. Note that this attribute is a SET only attribute.
                   cmSecurityUserStorageType 1.3.6.1.4.1.2544.1.12.10.1.5.1.12 storagetype read-only
The type of storage configured for this entry.
                   cmSecurityUserRowStatus 1.3.6.1.4.1.2544.1.12.10.1.5.1.13 rowstatus read-only
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmSecurityUserRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmSecurityUserRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmSecurityUserRowStatus object may be modified if the associated instance of this object is equal to active(1).
                   cmSecurityUserAction 1.3.6.1.4.1.2544.1.12.10.1.5.1.14 securityuseraction read-write
This object provides ability to perform specific actions on security user. remove-lockout - this removes the locked out condition on the security user .
                   cmSecurityCryptoPassword 1.3.6.1.4.1.2544.1.12.10.1.5.1.15 displaystring read-only
Second level password used in connectguard configurations. This applies only to crypto users. Note that this attribute is a SET only attribute.
                   cmSecurityUserRemoteCryptoUser 1.3.6.1.4.1.2544.1.12.10.1.5.1.16 truthvalue read-only
Indicates if a security user is a remote crypto user.
           cmRemoteAuthServerTable 1.3.6.1.4.1.2544.1.12.10.1.6 no-access
A list of entries corresponding to the remote authentication servers. Entries cannot be created in this table by management application action.
               cmRemoteAuthServerEntry 1.3.6.1.4.1.2544.1.12.10.1.6.1 no-access
An entry containing information applicable to a particular remote authentication server.
                   cmRemoteAuthServerIndex 1.3.6.1.4.1.2544.1.12.10.1.6.1.1 integer32 read-only
Unique index to address/configure a specific Remote Authentication Server.
                   cmRemoteAuthServerEnabled 1.3.6.1.4.1.2544.1.12.10.1.6.1.2 truthvalue read-write
This object allows enabling/disabling a Remote Authentication Server.
                   cmRemoteAuthServerOrder 1.3.6.1.4.1.2544.1.12.10.1.6.1.3 cmremoteauthorder read-write
This object determines the order in which the Remote Authentication Servers are accessed for security information.
                   cmRemoteAuthServerIpAddress 1.3.6.1.4.1.2544.1.12.10.1.6.1.4 ipaddress read-write
This object allows to specify an IP Address for the Remote Authentication Server.
                   cmRemoteAuthServerPort 1.3.6.1.4.1.2544.1.12.10.1.6.1.5 integer32 read-write
This object allows to specify a Port for Remote Authentication Server.
                   cmRemoteAuthServerNumRetries 1.3.6.1.4.1.2544.1.12.10.1.6.1.6 integer32 read-write
This object allows to specify the number of retries the Remote Authentication Server must be tried for security access before giving up.
                   cmRemoteAuthServerTimeout 1.3.6.1.4.1.2544.1.12.10.1.6.1.7 integer32 read-write
This object allows to specify the timeout period for timing out a security access request to the Remote Authentication Server.
                   cmRemoteAuthServerSecret 1.3.6.1.4.1.2544.1.12.10.1.6.1.8 displaystring read-write
This allows configuration of secret password for Remote Authentication Server request.
                   cmRemoteAuthServerAccountingPort 1.3.6.1.4.1.2544.1.12.10.1.6.1.9 integer32 read-write
This object allows to specify a Port for RADIUS Accounting.
                   cmRemoteAuthServerIpVersion 1.3.6.1.4.1.2544.1.12.10.1.6.1.10 ipversion read-write
This object describe the Ip Version.
                   cmRemoteAuthServerIpv6Addr 1.3.6.1.4.1.2544.1.12.10.1.6.1.11 ipv6address read-write
This object describe the Ipv6 Address.
           cmSecurityPolicyStrength 1.3.6.1.4.1.2544.1.12.10.1.7 cmsecuritypolicystrength read-write
This object represents the security policy strength of the system. Based on this value, the system puts additional restrictions on the user id and password rules.
           cmRemoteAuthServerAccountingEnabled 1.3.6.1.4.1.2544.1.12.10.1.8 truthvalue read-write
This object allows to enable/disable RADIUS Accounting on all authentication servers.
           f3UsmUserTable 1.3.6.1.4.1.2544.1.12.10.1.9 no-access
This table is the extension of the F3 USM User Table.
               f3UsmUserEntry 1.3.6.1.4.1.2544.1.12.10.1.9.1 no-access
An entry in the F3 USM User Table.
                   f3UsmUserAccessType 1.3.6.1.4.1.2544.1.12.10.1.9.1.1 usmuseraccesstype read-only
This indicates the type of USM User, read-only, read-write, trap-only.
           f3TacacsPrivLevelControlEnabled 1.3.6.1.4.1.2544.1.12.10.1.10 truthvalue read-write
This object allows to enable/disable the use of ENABLE authorization control to determine the Privilege Level configured by the remote authentication server. This object is only valid for TACACS+. Default value of this object is TRUE.
           f3TacacsDefaultPrivLevel 1.3.6.1.4.1.2544.1.12.10.1.11 cmsecurityprivlevel read-write
This object allows specification of the default privilege level of the TACACS+ user, when the use of ENABLE authorization control is DISABLED, i.e. f3TacacsPrivLevelControlEnabled is set to FALSE.
           f3NasIpv6Addr 1.3.6.1.4.1.2544.1.12.10.1.12 ipv6address read-write
This object describe the ipv6 address.
           f3SecurityTrapType 1.3.6.1.4.1.2544.1.12.10.1.13 snmpsecuritytraptype read-write
This object provides ability to manage whether report security trap.
           f3SecurityTrapInfo 1.3.6.1.4.1.2544.1.12.10.1.14 displaystring read-only
This object is used to describe the security trap info. This object is used only in trap and GET operation on this object will return empty string.
           f3PrivilegeChangeTable 1.3.6.1.4.1.2544.1.12.10.1.15 no-access
This table is used for Restricted User Login via NMS. This is for users with lower privileges to elevate them to higher ones for limited amount of time.
                 f3PrivilegeChangeEntry 1.3.6.1.4.1.2544.1.12.10.1.15.1 no-access
Column for privilegeChangeTable.
                     f3PrivilegeChangeId 1.3.6.1.4.1.2544.1.12.10.1.15.1.1 unsigned32 no-access
Unique index identifying a request.
                     f3PrivilegeChangeUserName 1.3.6.1.4.1.2544.1.12.10.1.15.1.2 snmpadminstring read-only
The name string for user authentication purposes
                     f3PrivilegeChangeIpv4Address 1.3.6.1.4.1.2544.1.12.10.1.15.1.3 ipaddress read-only
IPv4 address of interface to which user's terminal is connected.
                     f3PrivilegeChangeIpv6Address 1.3.6.1.4.1.2544.1.12.10.1.15.1.4 ipv6address read-only
IPv6 address of interface to which user's terminal is connected.
                     f3PrivilegeChangeTerminalIpv4Address 1.3.6.1.4.1.2544.1.12.10.1.15.1.5 ipaddress read-only
Source IPv4 address of connected terminal.
                     f3PrivilegeChangeTerminalIpv6Address 1.3.6.1.4.1.2544.1.12.10.1.15.1.6 ipv6address read-only
Source IPv6 address of connected terminal.
                     f3PrivilegeChangeInterface 1.3.6.1.4.1.2544.1.12.10.1.15.1.7 userinterfacetype read-only
Interface used by the user
                     f3PrivilegeChangeCurrentPrivilege 1.3.6.1.4.1.2544.1.12.10.1.15.1.8 cmsecurityprivlevel read-only
Current privilege level of the user, who is requesting role upgrade.
                     f3PrivilegeChangeRequestedPrivilege 1.3.6.1.4.1.2544.1.12.10.1.15.1.9 cmsecurityprivlevel read-only
Privilege requested by user for session.
                     f3PrivilegeChangeDuration 1.3.6.1.4.1.2544.1.12.10.1.15.1.10 unsigned32 read-only
Requested time period by user (in minutes).
                     f3PrivilegeChangeAction 1.3.6.1.4.1.2544.1.12.10.1.15.1.11 privilegerequestaction read-write
Privilege request action.
                     f3PrivilegeChangeState 1.3.6.1.4.1.2544.1.12.10.1.15.1.12 privilegerequeststate read-only
Privilege request state.
                     f3PrivilegeChangeRemainingTime 1.3.6.1.4.1.2544.1.12.10.1.15.1.13 unsigned32 read-only
Time remaining in session with upgrade user privilege (in seconds).
                     f3PrivilegeChangeRemoteName 1.3.6.1.4.1.2544.1.12.10.1.15.1.14 snmpadminstring read-only
The name string for Radius/Tacacs authentication purposes.
           f3UserPrivMgmtControl 1.3.6.1.4.1.2544.1.12.10.1.16 truthvalue read-write
This object is used to enable/disable User Privilege Management.
           f3UserPrivRspTimeout 1.3.6.1.4.1.2544.1.12.10.1.17 integer32 read-write
This object is used to set response timeout for user privilege upgrade request in minutes.
       cmSecurityConformance 1.3.6.1.4.1.2544.1.12.10.2
           cmSecurityCompliances 1.3.6.1.4.1.2544.1.12.10.2.1
               cmSecurityCompliance 1.3.6.1.4.1.2544.1.12.10.2.1.1
Describes the requirements for conformance to the CM Security group.
           cmSecurityGroups 1.3.6.1.4.1.2544.1.12.10.2.2
               cmSecurityObjectGroup 1.3.6.1.4.1.2544.1.12.10.2.2.1
A collection of objects used to manage the CM Security group.
               cmSecurityNotifGroup 1.3.6.1.4.1.2544.1.12.10.2.2.2
A collection of notifications used in the CM Security group.
       cmSecurityNotifications 1.3.6.1.4.1.2544.1.12.10.3
           f3SecurityTrap 1.3.6.1.4.1.2544.1.12.10.3.1
This is security trap. Security traps are reported according to value of f3SecurityTrapType object.
           f3PrivilegeChangeTrap 1.3.6.1.4.1.2544.1.12.10.3.2
This trap is sent every time a privilege change request is changed (added, modified, removed).