CLARENT-MIB: View SNMP OID List / Download MIB

VENDOR: CLARENT CORPORATION


 Home MIB: CLARENT-MIB
Download as:   
RFC-1212, RFC1213-MIB, RFC1155-SMI, RFC-1215

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 clarent 1.3.6.1.4.1.2858
           gateway 1.3.6.1.4.1.2858.1
               gatewayStatus 1.3.6.1.4.1.2858.1.1
The number of ports currently in use, as well as the number of calls, call time, and hold time for each port (# sign-delimited string)
               portInUseCount 1.3.6.1.4.1.2858.1.2
Number of ports currently in use
               gwnumberOfCalls 1.3.6.1.4.1.2858.1.3
Number of calls per port (comma-delimited string)
               portCallTime 1.3.6.1.4.1.2858.1.4
Call time per port (comma-delimited string)
               portHoldTime 1.3.6.1.4.1.2858.1.5
Hold time per port (comma-delimited string)
               trafficStatus 1.3.6.1.4.1.2858.1.6
Traffic information: idle, ingress, egress, fax, and out of service time
               gwOperState 1.3.6.1.4.1.2858.1.7
State of the GW, enabled means running, disabled means not running
               gwBoardType 1.3.6.1.4.1.2858.1.8
Type of boards loaded in Gateway
               gwNumBoards 1.3.6.1.4.1.2858.1.9
Number of boards loaded in Gateway
               gwPortsPerFirstSpan 1.3.6.1.4.1.2858.1.10
number of ports on the first span in a multi-span board
               gwPortsPerSpan 1.3.6.1.4.1.2858.1.11
number of ports on a span in a multi-span board
               gwSpansPerBoard 1.3.6.1.4.1.2858.1.12
number of spans on a board
               gwPortStatusList 1.3.6.1.4.1.2858.1.13
returns an OCTET string of length equal to the number of ports in the system. Each byte indicates the status of the port at that offset. That values are identical to the portStatus Value defined in the Port Table below
           ccreadvars 1.3.6.1.4.1.2858.2
               ccStatus 1.3.6.1.4.1.2858.2.1
Clarent Command Center status
               ccOperState 1.3.6.1.4.1.2858.2.2
State of the CC, enabled means running, disabled means not running
           rdc 1.3.6.1.4.1.2858.3
               rdcStatus 1.3.6.1.4.1.2858.3.1
Roaming Domain Controller status
           clarent-traps 1.3.6.1.4.1.2858.4
           clearinghouse 1.3.6.1.4.1.2858.5
           gwControl 1.3.6.1.4.1.2858.6
               gwControlVal 1.3.6.1.4.1.2858.6.1
Controls Clarent Gateway
               trapParm1 1.3.6.1.4.1.2858.6.2
Allows traps to have integer parameters
               trapParm2 1.3.6.1.4.1.2858.6.3
Allows traps to have integer parameters
               trapParm3 1.3.6.1.4.1.2858.6.4
Allows traps to have integer parameters
               trapParm4 1.3.6.1.4.1.2858.6.5
Allows traps to have string parameters
               clarentcfg 1.3.6.1.4.1.2858.6.6
Private control field
               enablePort 1.3.6.1.4.1.2858.6.7
Enable the port passed in the varbind. For example, to enable port 9, set the value of this variable to 9. Setting the value of this variable to -1 enables all ports.
               disablePort 1.3.6.1.4.1.2858.6.8
Disable the port passed in the varbind. For example, to disable port 11, set the value of this variable to 11. Setting the value of this variable to -1 disables all ports.
               hangupPort 1.3.6.1.4.1.2858.6.9
Hang up the port passed in the varbind. For example, to hang up port 10, set the value of this variable to 10. Setting the value of this variable to -1 hangs up all ports.
           ccControl 1.3.6.1.4.1.2858.7
               ccControlval 1.3.6.1.4.1.2858.7.1
Controls Clarent Command Center
           gatewayports 1.3.6.1.4.1.2858.8
               gwNumPhysicalPorts 1.3.6.1.4.1.2858.8.1
Number of physical gateway ports present on this system (regardless of their current states)
               gwPortTable 1.3.6.1.4.1.2858.8.2
A list of gateway port entries. The number of usable ports is governed by the number of licensed ports.
                   gwPortEntry 1.3.6.1.4.1.2858.8.2.1
The status of a port
                       portIndex 1.3.6.1.4.1.2858.8.2.1.1
A unique number for each port, ranging from 0 (zero) to the number of physical ports
                       portStatus 1.3.6.1.4.1.2858.8.2.1.2
Port state
                       numberOfCalls 1.3.6.1.4.1.2858.8.2.1.3
Number of calls made on the port
                       avgHoldTime 1.3.6.1.4.1.2858.8.2.1.4
Average time per call on the port
                       xmitCount 1.3.6.1.4.1.2858.8.2.1.5
                       recvCount 1.3.6.1.4.1.2858.8.2.1.6
                       ingressTime 1.3.6.1.4.1.2858.8.2.1.7
Total ingress time, in seconds, on the port
                       ingressCount 1.3.6.1.4.1.2858.8.2.1.8
Total number of ingress calls on the port
                       egressTime 1.3.6.1.4.1.2858.8.2.1.9
Total egress time, in seconds, on the port
                       egressCount 1.3.6.1.4.1.2858.8.2.1.10
Total number of egress calls on the port
                       clarentreserved 1.3.6.1.4.1.2858.8.2.1.11
Reserved
                       totalVoiceUsage 1.3.6.1.4.1.2858.8.2.1.12
Time, in seconds, used for voice calls on the port
                       voicecount 1.3.6.1.4.1.2858.8.2.1.13
Total number of voice calls on the port
                       totalFaxUsage 1.3.6.1.4.1.2858.8.2.1.14
Time, in seconds, used for fax calls on the port
                       faxcount 1.3.6.1.4.1.2858.8.2.1.15
Total number of fax calls on the port
                       totalDataUsage 1.3.6.1.4.1.2858.8.2.1.16
Time, in seconds, used for data transfer/modem calls on the port
                       datacount 1.3.6.1.4.1.2858.8.2.1.17
Number of data events on the port
                       linePortState 1.3.6.1.4.1.2858.8.2.1.18
Line port state
                       linePortLocMState 1.3.6.1.4.1.2858.8.2.1.19
Local maintenance state of the telephone line to the port
                       linePortRemMState 1.3.6.1.4.1.2858.8.2.1.20
Remote maintenance state of the telephone line to the port
                       ipPortState 1.3.6.1.4.1.2858.8.2.1.21
IP port state
                       ipPortLocMState 1.3.6.1.4.1.2858.8.2.1.22
Local maintenance state of the IP connection between gateways
                       ipPortRemMState 1.3.6.1.4.1.2858.8.2.1.23
Remote maintenance state of the IP connection between gateways.
                       connectedCalls 1.3.6.1.4.1.2858.8.2.1.24
Number of calls answered
                       remoteChannel 1.3.6.1.4.1.2858.8.2.1.25
Port number on the remote gateway, if the port is connected
                       remoteGWId 1.3.6.1.4.1.2858.8.2.1.26
ID of the remote gateway, if the port is connected
                       currentHoldTime 1.3.6.1.4.1.2858.8.2.1.27
Current hold time, in seconds, if the port is connected
                       currentAni 1.3.6.1.4.1.2858.8.2.1.28
Current ANI, if the port is connected
                       currentDnis 1.3.6.1.4.1.2858.8.2.1.29
Current DNIS, if the port is connected
           gatewaytable 1.3.6.1.4.1.2858.9
               gwNumAttached 1.3.6.1.4.1.2858.9.1
The number of Clarent Gateways currently connected to the Command Center
               gwTable 1.3.6.1.4.1.2858.9.2
A list of Clarent Gateway entries
                   gwEntry 1.3.6.1.4.1.2858.9.2.1
Clarent Gateway entry
                       gwId 1.3.6.1.4.1.2858.9.2.1.1
A unique number for each Clarent Gateway
                       serverIpAddr 1.3.6.1.4.1.2858.9.2.1.2
IP Address of the Clarent Gateway
                       inServerTable 1.3.6.1.4.1.2858.9.2.1.3
Whether the gateway is in the SERVER-INFO table
           gwtrafficstats 1.3.6.1.4.1.2858.10
                 totalInterval 1.3.6.1.4.1.2858.10.1
Time, in seconds, since any member of the Traffic Stats group was last read
                 totalEventCount 1.3.6.1.4.1.2858.10.2
Total number of events in gateway
                 totalIngressTime 1.3.6.1.4.1.2858.10.3
Total time, in seconds, for ingress traffic
                 totalIngressCount 1.3.6.1.4.1.2858.10.4
Total number of ingress events
                 totalEgressTime 1.3.6.1.4.1.2858.10.5
Total time, in seconds, for egress traffic
                 totalEgressCount 1.3.6.1.4.1.2858.10.6
Total number of egress events
                 totalFaxTime 1.3.6.1.4.1.2858.10.7
Total time, in seconds, for fax traffic
                 totalFaxCount 1.3.6.1.4.1.2858.10.8
Total number of fax events
                 totalOutSvcTime 1.3.6.1.4.1.2858.10.9
Total time, in seconds, that the gateway has been out of service :: Reserved; Not Implemented
                 totalOutSvcCount 1.3.6.1.4.1.2858.10.10
Total number of egress events :: Reserved; Not Implemented
                 totalDataTime 1.3.6.1.4.1.2858.10.11
Total time, in seconds, for data traffic
                 totalDataCount 1.3.6.1.4.1.2858.10.12
Total number of data events
                 totalVoiceTime 1.3.6.1.4.1.2858.10.13
Total time, in seconds, for voice traffic
                 totalVoiceCount 1.3.6.1.4.1.2858.10.14
Total number of voice events
                 totalConnectCall 1.3.6.1.4.1.2858.10.15
Total number of ingress calls that were terminated at a remote gateway
           trap-Parameters 1.3.6.1.4.1.2858.48
                 trapSeverity 1.3.6.1.4.1.2858.48.1
Trap severity
                 trapClass 1.3.6.1.4.1.2858.48.2
Trap class
                 trapNumber 1.3.6.1.4.1.2858.48.3
Class-specific trap number
                 trapText 1.3.6.1.4.1.2858.48.4
Text on a per trap Basis
                 trapCount 1.3.6.1.4.1.2858.48.5
Number of specific traps sent from the agent
                 trapAppName 1.3.6.1.4.1.2858.48.6
Name of the Clarent Application issuing the Trap
                 threshHoldName 1.3.6.1.4.1.2858.48.7
Name of the Threshold Package being reported on in a ThreshHold Trap
                 threshHoldValue 1.3.6.1.4.1.2858.48.8
The ThreshHoldValue That is being exceeded or rearmed
                 currentValue 1.3.6.1.4.1.2858.48.9
The current value of the paramater that has exceeded or rearmed the threshHold in the ThreshHold Trap
                 threshHoldAction 1.3.6.1.4.1.2858.48.10
ThreshHold Action
           mgt 1.3.6.1.4.1.2858.100
                   packageManagement 1.3.6.1.4.1.2858.100.1
                       numPackages 1.3.6.1.4.1.2858.100.1.1
Number of packages on a Clarent Network Element.
                       packageTable 1.3.6.1.4.1.2858.100.1.2
A list of package entries
                           packageEntry 1.3.6.1.4.1.2858.100.1.2.1
Package status entry
                               packageName 1.3.6.1.4.1.2858.100.1.2.1.1
Unique name of the package
                               packageStatus 1.3.6.1.4.1.2858.100.1.2.1.2
Package status
                               downloadStatus 1.3.6.1.4.1.2858.100.1.2.1.3
Package download status
                               downloadMessage 1.3.6.1.4.1.2858.100.1.2.1.4
Package download status message
                               downloadError 1.3.6.1.4.1.2858.100.1.2.1.5
Package download error
                               unpackStatus 1.3.6.1.4.1.2858.100.1.2.1.6
Package unpack status
                               unpackMessage 1.3.6.1.4.1.2858.100.1.2.1.7
Package unpack status message
                               unpackError 1.3.6.1.4.1.2858.100.1.2.1.8
Package unpack error
                               installStatus 1.3.6.1.4.1.2858.100.1.2.1.9
Package install status
                               installMessage 1.3.6.1.4.1.2858.100.1.2.1.10
Package install status message
                               installError 1.3.6.1.4.1.2858.100.1.2.1.11
Package install error
                               prepareStatus 1.3.6.1.4.1.2858.100.1.2.1.12
Package prepare status
                               prepareMessage 1.3.6.1.4.1.2858.100.1.2.1.13
Package prepare status message
                               prepareError 1.3.6.1.4.1.2858.100.1.2.1.14
Package prepare error
                               commitStatus 1.3.6.1.4.1.2858.100.1.2.1.15
Package commit status
                               commitMessage 1.3.6.1.4.1.2858.100.1.2.1.16
Package commit status message
                               commitError 1.3.6.1.4.1.2858.100.1.2.1.17
Package commit error
                               abortStatus 1.3.6.1.4.1.2858.100.1.2.1.18
Package abort status
                               abortMessage 1.3.6.1.4.1.2858.100.1.2.1.19
Package abort status message
                               abortError 1.3.6.1.4.1.2858.100.1.2.1.20
Package abort error
                               loadStatus 1.3.6.1.4.1.2858.100.1.2.1.21
Package load status
                               loadMessage 1.3.6.1.4.1.2858.100.1.2.1.22
Package load status message
                               loadError 1.3.6.1.4.1.2858.100.1.2.1.23
Package load error
                               deleteStatus 1.3.6.1.4.1.2858.100.1.2.1.24
Package delete status
                               deleteMessage 1.3.6.1.4.1.2858.100.1.2.1.25
Package delete status message
                               deleteError 1.3.6.1.4.1.2858.100.1.2.1.26
Package delete error
                               commitLevel 1.3.6.1.4.1.2858.100.1.2.1.27
Mode of operation in which the package was installed
                       downLoadCommand 1.3.6.1.4.1.2858.100.1.3
Initiate a DOWNLOAD command. In the SET command, specify the package name.
                       unpackCommand 1.3.6.1.4.1.2858.100.1.4
Initiate an UNPACK command. In the SET command, specify the package name.
                       installCommand 1.3.6.1.4.1.2858.100.1.5
Initiate an INSTALL command. In the SET command, specify the package name.
                       prepareCommand 1.3.6.1.4.1.2858.100.1.6
Initiate a PREPARE command. In the SET command, specify the package name.
                       commitCommand 1.3.6.1.4.1.2858.100.1.7
Initiate a COMMIT command. In the SET command, specify the package name.
                       abortCommand 1.3.6.1.4.1.2858.100.1.8
Initiate an ABORT command. In the SET command, specify the package name.
                       loadCommand 1.3.6.1.4.1.2858.100.1.9
Initiate a LOAD command. In the SET command, specify the package name.
                       baseURL 1.3.6.1.4.1.2858.100.1.10
Use this variable to set/get the BASE URL, which is a well-known URL identifying the location from which packages are downloaded.
                       deleteCommand 1.3.6.1.4.1.2858.100.1.11
Initiate a DELETE command. In the SET command, specify the package name.
                       packageOperation 1.3.6.1.4.1.2858.100.1.99999
List of allowed package operations
                   gwStatisticsManagement 1.3.6.1.4.1.2858.100.2
                       gwEnableStats 1.3.6.1.4.1.2858.100.2.1
Enables statistics messages from the gateway to the Command Center. Specify a value of 1 to enable statistics. The default value is 0 (zero), which disables statistics.
                       gwStatsInterval 1.3.6.1.4.1.2858.100.2.2
Interval, in minutes, between gateway statistic messages from the gateway to the Command Center
                   throughPacket 1.3.6.1.4.1.2858.100.3
                       tpStatus 1.3.6.1.4.1.2858.100.3.1
                           tpstatus 1.3.6.1.4.1.2858.100.3.1.1
Current status of the Clarent ThroughPacket server
                           tpstatusCode 1.3.6.1.4.1.2858.100.3.1.2
If tpstatus is inError, interrogate this variable for more information.
                           tpOperState 1.3.6.1.4.1.2858.100.3.1.3
State of the TP, enabled means running, disabled means not running
                       tpConfig 1.3.6.1.4.1.2858.100.3.2
                           priCCIPAddress 1.3.6.1.4.1.2858.100.3.2.1
IP address of the primary Command Center for the Clarent ThroughPacket server
                           ccPortNumber 1.3.6.1.4.1.2858.100.3.2.2
Port number of the Command Center for the Clarent ThroughPacket server
                           secCCIPAddress 1.3.6.1.4.1.2858.100.3.2.3
IP address of the secondary Command Center for the Clarent ThroughPacket server
                           tpConfigCommand 1.3.6.1.4.1.2858.100.3.2.4
Use this variable to issue commands to the Clarent ThroughPacket server
                           tpRunTimeCtrl 1.3.6.1.4.1.2858.100.3.2.5
Start or stop the Clarent ThroughPacket server
                       tpStatisticsManagement 1.3.6.1.4.1.2858.100.3.3
                           tpEnableStats 1.3.6.1.4.1.2858.100.3.3.1
Enables statistics messages from Clarent ThroughPacket to the Command Center. Specify a value of 1 to enable statistics. The default value is 0 (zero), which disables statistics.
                           tpStatsInterval 1.3.6.1.4.1.2858.100.3.3.2
Interval, in minutes, between statistics messages from Clarent ThroughPacket to the Command Center
                   procManagement 1.3.6.1.4.1.2858.100.4
                       autoGWRestart 1.3.6.1.4.1.2858.100.4.1
Enable SNMP Agent to automatically restart the GW
                       autoCCRestart 1.3.6.1.4.1.2858.100.4.2
Enable SNMP Agent to automatically restart the GW
                       autoTPRestart 1.3.6.1.4.1.2858.100.4.3
Enable SNMP Agent to automatically restart the GW
                       autoDMRestart 1.3.6.1.4.1.2858.100.4.4
Enable SNMP Agent to automatically restart the DM
                       autoGKRestart 1.3.6.1.4.1.2858.100.4.5
Enable SNMP Agent to automatically restart the GK
                       autoCAMRestart 1.3.6.1.4.1.2858.100.4.6
Enable SNMP Agent to automatically restart the CAM
                   versionManagement 1.3.6.1.4.1.2858.100.5
                       versionTable 1.3.6.1.4.1.2858.100.5.1
A list of Version entries
                           versionEntry 1.3.6.1.4.1.2858.100.5.1.1
Version Table Entry containing version component information
                               component 1.3.6.1.4.1.2858.100.5.1.1.1
Name of Clarent Component that is versioned
                               majorVersion 1.3.6.1.4.1.2858.100.5.1.1.2
Major Release Version Number
                               minorVersion 1.3.6.1.4.1.2858.100.5.1.1.3
Minor Release Version Number
                               buildMajorVersion 1.3.6.1.4.1.2858.100.5.1.1.4
Build Major Release Version Number
                               buildMinorVersion 1.3.6.1.4.1.2858.100.5.1.1.5
Major Release Version Number
                               versionString 1.3.6.1.4.1.2858.100.5.1.1.6
Version in String Format
                   cSysManagement 1.3.6.1.4.1.2858.100.6
                       cSysStatus 1.3.6.1.4.1.2858.100.6.1
                           cSystemStatus 1.3.6.1.4.1.2858.100.6.1.1
Current status of the Clarent Network Element, if state is shutdownAllowed it means that an enableShutdown down operation has been received. At this point a startShutdown operation would start the shutdown process, if opError then the csystemError will contain an error code
                           cSystemError 1.3.6.1.4.1.2858.100.6.1.2
Error Code reflected from system
                       cSysControl 1.3.6.1.4.1.2858.100.6.2
                           cSysOperation 1.3.6.1.4.1.2858.100.6.2.1
User can reboot the system by issuing an enableShutdown operation followed by a startShutdown operation. When the system is enabled for shutdown the clarent shutdowntrap is emitted, disableShutdown inhibits shutdown until an enableShutdown is received. Default state is Shutdown disabled
                   cGatekeeper 1.3.6.1.4.1.2858.100.20
                         cGkStatus 1.3.6.1.4.1.2858.100.20.1
                             gkPortInUseCount 1.3.6.1.4.1.2858.100.20.1.1
Number of ports currently in use
                             gkOpState 1.3.6.1.4.1.2858.100.20.1.2
Clarent Gatekeeper operational state
                             gkAltGKList 1.3.6.1.4.1.2858.100.20.1.3
Alternate gatekeeper list
                             gkLoadState 1.3.6.1.4.1.2858.100.20.1.4
Clarent Gatekeeper load state
                             gkCCConnState 1.3.6.1.4.1.2858.100.20.1.5
Gatekeeper-to-Command Center connection state
                             gkCallStatsTable 1.3.6.1.4.1.2858.100.20.1.6
List of call statistics for all call port types
                                 gkCallStatsEntry 1.3.6.1.4.1.2858.100.20.1.6.1
Entry in the CallStatsTable for a given call port type
                                     gkCallPortType 1.3.6.1.4.1.2858.100.20.1.6.1.1
List of call port types. Call port types are: TOTAL, a call from any combination of call port types H323H323, an H.323 gateway-to-H.323 gateway call H323CLARENT, an H.323 gateway-to IP H323NONE , an H.323 gateway call that was not successfully routed CLARENT2H323, a Clarent Gateway-to-H.323 gateway call CLARENT2CLARENT, a Clarent Gateway-Clarent Gateway call CLARENT2CLARENT, a Clarent Gateway call that was not successfully routed.
                                     gkNumberOfCalls 1.3.6.1.4.1.2858.100.20.1.6.1.2
Number of call attempts for a given call port type
                                     gkCallTime 1.3.6.1.4.1.2858.100.20.1.6.1.3
Amount of time, in seconds, for calls of a given call port type
                                     gkAverageHoldTime 1.3.6.1.4.1.2858.100.20.1.6.1.4
Average hold time for calls of a given call port type
                                     gkNumberOfConnectedCalls 1.3.6.1.4.1.2858.100.20.1.6.1.5
Number of call completions for a given call port type
                         cGkConfig 1.3.6.1.4.1.2858.100.20.2
                             gkName 1.3.6.1.4.1.2858.100.20.2.1
Clarent Gatekeeper name
                             gkIPAddr 1.3.6.1.4.1.2858.100.20.2.2
IP address of Clarent Gatekeeper
                             gkExternalIPAddr 1.3.6.1.4.1.2858.100.20.2.3
IP address by which Clarent Gatekeeper is known to outside entities
                             gkCCUDPPort 1.3.6.1.4.1.2858.100.20.2.4
UDP port through which Clarent Command Center communicates with Clarent Gatekeeper
                             gkPrimaryCCCIPAddr 1.3.6.1.4.1.2858.100.20.2.5
IP address of primary Command Center
                             gkSecCCCIPAddr 1.3.6.1.4.1.2858.100.20.2.6
IP address of secondary Command Center
                             gkServiceLpdFilePath 1.3.6.1.4.1.2858.100.20.2.7
Location of telephone user interface, or Line Port Director (LPD) file
                             gkDebugFilePath 1.3.6.1.4.1.2858.100.20.2.8
Path to Clarent Gatekeeper trace configuration file
                             gkLogFileEnable 1.3.6.1.4.1.2858.100.20.2.9
Enable or disable file logging
                             gkLogFileDir 1.3.6.1.4.1.2858.100.20.2.10
Directory in which Clarent Gatekeeper saves log files
                             gkLogFileAppendString 1.3.6.1.4.1.2858.100.20.2.11
Character string to append to Clarent Gatekeeper log file names
                             gkLogFileRolloverSize 1.3.6.1.4.1.2858.100.20.2.12
Size, in kilobytes, to which Clarent Gatekeeper allows a log file to grow before closing a log and starting another
                             gkLogFileMaxNumFiles 1.3.6.1.4.1.2858.100.20.2.13
Maximum number of log files Clarent Gatekeeper creates before overwriting existing logs
                             gkSysLogEnable 1.3.6.1.4.1.2858.100.20.2.14
Enable or disable logging to a system logging (syslog) daemon process running on another computer
                             gkSysLogIpAddr 1.3.6.1.4.1.2858.100.20.2.15
IP address of a system logging (syslog) daemon server
                             gkGroup 1.3.6.1.4.1.2858.100.20.2.16
Group to which Clarent Gatekeeper belongs
                             gkPriority 1.3.6.1.4.1.2858.100.20.2.17
Priority of this Clarent Gatekeeper in the alternate gatekeeper list
                             gkRasKeepAliveTimer 1.3.6.1.4.1.2858.100.20.2.18
Amount of time, in seconds, that an H.323 gateway must register with Clarent Gatekeeper. Default = 25, miniumum = 0, maximum = 120.
                             gkCCCKeepAliveTimer 1.3.6.1.4.1.2858.100.20.2.19
How often, in seconds, Clarent Gatekeeper checks its connection with the Command Center. Default = 10, minimum = 5, maximum = 120
                             gkAdminState 1.3.6.1.4.1.2858.100.20.2.20
Command object to shut down Gatekeeper gracefully or forcefully
                             gkGracefulShutdownPeriod 1.3.6.1.4.1.2858.100.20.2.21
Number of minutes to wait before shutting down Clarent Gatekeeper gracefully
                         cGkStatisticsManagement 1.3.6.1.4.1.2858.100.20.3
                         clarent-gktraps 1.3.6.1.4.1.2858.100.20.100