CISCOSB-rlFft: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCOSB-rlFft
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC, CISCOSB-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlFFT 1.3.6.1.4.1.9.6.1.101.47
The private MIB module definition for switch001 Fast Forwarding Tables.
       rlIpFFT 1.3.6.1.4.1.9.6.1.101.47.1
           rlIpFftMibVersion 1.3.6.1.4.1.9.6.1.101.47.1.1 integer read-only
MIB's version, the current version is 1.
           rlInetMaxFftNumber 1.3.6.1.4.1.9.6.1.101.47.1.2 integer read-only
The maximum number of IP FFTs.
           rlInetFftDynamicSupported 1.3.6.1.4.1.9.6.1.101.47.1.3 integer read-only
Specifies whether dynamic IP FFTs are supported. Enumeration: 'supported': 1, 'unsupported': 2.
           rlInetFftSubnetSupported 1.3.6.1.4.1.9.6.1.101.47.1.4 integer read-only
Specifies whether subtable per IP subnet is supported. Enumeration: 'supported': 1, 'unsupported': 2.
           rlIpFftUnknownAddrMsgUsed 1.3.6.1.4.1.9.6.1.101.47.1.5 integer read-only
Specifies whether the 3SW uses the unknown address message. Enumeration: 'unused': 2, 'used': 1.
           rlInetFftAgingTimeSupported 1.3.6.1.4.1.9.6.1.101.47.1.6 integer read-only
Specifies whether aging time is supported. Enumeration: 'supported': 1, 'unsupported': 2.
           rlIpFftSrcAddrSupported 1.3.6.1.4.1.9.6.1.101.47.1.7 integer read-only
Specifies whether an IP subtable per station contains source IP address. Enumeration: 'supported': 1, 'unsupported': 2.
           rlInetFftAgingTimeout 1.3.6.1.4.1.9.6.1.101.47.1.8 integer read-write
The aging timeout in seconds.
           rlIpFftRedBoundary 1.3.6.1.4.1.9.6.1.101.47.1.9 percents read-write
The red boundary in percents.
           rlIpFftYellowBoundary 1.3.6.1.4.1.9.6.1.101.47.1.10 percents read-write
The yellow boundary in percents.
           rlInetFftNumTable 1.3.6.1.4.1.9.6.1.101.47.1.12 no-access
The (conceptual) table containing routes' numbers of the IP SFFTs and IP NFFTs.
                 rlInetFftNumEntry 1.3.6.1.4.1.9.6.1.101.47.1.12.1 no-access
An entry (conceptual row) containing the containing routes' numbers of IP SFFT and IP NFFT
                     rlInetFftNumIndex 1.3.6.1.4.1.9.6.1.101.47.1.12.1.1 integer read-only
The value of the index of the IP FFT.
                     rlInetFftNumAddressType 1.3.6.1.4.1.9.6.1.101.47.1.12.1.2 inetaddresstype read-only
The inet address type that are contained in the IP SFFT.
                     rlInetFftNumStnRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.1.12.1.3 integer read-only
The number of routes that are contained in the IP SFFT.
                     rlInetFftNumSubRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.1.12.1.4 integer read-only
The number of routes that are contained in the IP NFFT.
                     rlInetFftNumInetTomeRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.1.12.1.5 integer read-only
The number of routes that are Inet To Me.
           rlInetFftStnTable 1.3.6.1.4.1.9.6.1.101.47.1.13 no-access
The (conceptual) table contains IP Fast Forwarding information per station for IP datagrams.
                 rlInetFftStnEntry 1.3.6.1.4.1.9.6.1.101.47.1.13.1 no-access
An entry (conceptual row) contains the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
                     rlInetFftStnIndex 1.3.6.1.4.1.9.6.1.101.47.1.13.1.1 integer read-only
The value of the index of the IP FFT.
                     rlInetFftStnMrid 1.3.6.1.4.1.9.6.1.101.47.1.13.1.2 integer read-only
The router's Instance Identifier in the SFFT.
                     rlInetFftStnDstInetAddressType 1.3.6.1.4.1.9.6.1.101.47.1.13.1.3 inetaddresstype read-only
The Ip destination type for which this entry contains IP forwarding information.
                     rlInetFftStnDstInetAddress 1.3.6.1.4.1.9.6.1.101.47.1.13.1.4 inetaddress read-only
The IP destination address for which this entry contains IP forwarding information.
                     rlInetFftStnDstRouteInetPrefix 1.3.6.1.4.1.9.6.1.101.47.1.13.1.5 inetaddressprefixlength read-only
The IP destination prefix for which this entry contains IP forwarding information.
                     rlInetFftStnDstInetAddrType 1.3.6.1.4.1.9.6.1.101.47.1.13.1.6 integer read-only
The IP destination address type. Enumeration: 'remote': 2, 'local': 1.
                     rlInetFftStnDstMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.13.1.7 physaddress read-only
The MAC destination address.
                     rlInetFftStnSrcMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.13.1.8 physaddress read-only
The MAC source address.
                     rlInetFftStnOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.1.13.1.9 integer read-only
The value of ifIndex of output physical port.
                     rlInetFftStnVid 1.3.6.1.4.1.9.6.1.101.47.1.13.1.10 integer read-only
The vid of the output port.
                     rlInetFftStnTaggedMode 1.3.6.1.4.1.9.6.1.101.47.1.13.1.11 integer read-only
The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field gets the BasedPortConfig value Enumeration: 'untagged': 1, 'tagged': 2, 'basedPortConfig': 3.
                     rlInetFftStnAge 1.3.6.1.4.1.9.6.1.101.47.1.13.1.12 integer read-only
The age of the entry in seconds from the inserting.
           rlInetFftSubTable 1.3.6.1.4.1.9.6.1.101.47.1.14 no-access
The (conceptual) table containing IP Fast Forwarding information per subnet for IP datagrams.
                 rlInetFftSubEntry 1.3.6.1.4.1.9.6.1.101.47.1.14.1 no-access
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
                     rlInetFftSubMrid 1.3.6.1.4.1.9.6.1.101.47.1.14.1.1 integer read-only
The router's Instance Identifier in the NFFT.
                     rlInetFftSubDstInetSubnetType 1.3.6.1.4.1.9.6.1.101.47.1.14.1.2 inetaddresstype read-only
The IP destination subnet type for which this entry contains IP forwarding information.
                     rlInetFftSubDstInetSubnet 1.3.6.1.4.1.9.6.1.101.47.1.14.1.3 inetaddress read-only
The IP destination subnet for which this entry contains IP forwarding information.
                     rlInetFftSubDstInetPrefix 1.3.6.1.4.1.9.6.1.101.47.1.14.1.4 inetaddressprefixlength read-only
The IP destination prefix for which this entry contains IP forwarding information.
                     rlInetFftSubNextHopSetRefCount 1.3.6.1.4.1.9.6.1.101.47.1.14.1.5 integer read-only
The number of NFFT entries that used the given NextHop set (ECMP path).
                     rlInetFftSubNextHopCount 1.3.6.1.4.1.9.6.1.101.47.1.14.1.6 integer read-only
The number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopIfindex1 1.3.6.1.4.1.9.6.1.101.47.1.14.1.7 integer read-only
The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr1Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.8 inetaddresstype read-only
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr1 1.3.6.1.4.1.9.6.1.101.47.1.14.1.9 inetaddress read-only
The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopIfindex2 1.3.6.1.4.1.9.6.1.101.47.1.14.1.10 integer read-only
The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr2Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.11 inetaddresstype read-only
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr2 1.3.6.1.4.1.9.6.1.101.47.1.14.1.12 inetaddress read-only
The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopIfindex3 1.3.6.1.4.1.9.6.1.101.47.1.14.1.13 integer read-only
The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr3Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.14 inetaddresstype read-only
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr3 1.3.6.1.4.1.9.6.1.101.47.1.14.1.15 inetaddress read-only
The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopIfindex4 1.3.6.1.4.1.9.6.1.101.47.1.14.1.16 integer read-only
The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr4Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.17 inetaddresstype read-only
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr4 1.3.6.1.4.1.9.6.1.101.47.1.14.1.18 inetaddress read-only
The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopIfindex5 1.3.6.1.4.1.9.6.1.101.47.1.14.1.19 integer read-only
The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr5Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.20 inetaddresstype read-only
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr5 1.3.6.1.4.1.9.6.1.101.47.1.14.1.21 inetaddress read-only
The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopIfindex6 1.3.6.1.4.1.9.6.1.101.47.1.14.1.22 integer read-only
The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr6Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.23 inetaddresstype read-only
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr6 1.3.6.1.4.1.9.6.1.101.47.1.14.1.24 inetaddress read-only
The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopIfindex7 1.3.6.1.4.1.9.6.1.101.47.1.14.1.25 integer read-only
The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr7Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.26 inetaddresstype read-only
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr7 1.3.6.1.4.1.9.6.1.101.47.1.14.1.27 inetaddress read-only
The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopIfindex8 1.3.6.1.4.1.9.6.1.101.47.1.14.1.28 integer read-only
The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr8Type 1.3.6.1.4.1.9.6.1.101.47.1.14.1.29 inetaddresstype read-only
The first NextHop IP address type in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubNextHopInetAddr8 1.3.6.1.4.1.9.6.1.101.47.1.14.1.30 inetaddress read-only
The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.
                     rlInetFftSubAge 1.3.6.1.4.1.9.6.1.101.47.1.14.1.31 integer read-only
The age of the entry in seconds from the inserting.
           rlInetFftCountersTable 1.3.6.1.4.1.9.6.1.101.47.1.15 no-access
The (conceptual) table containing IP Counters information per one IP FFT.
                 rlInetFftCountersEntry 1.3.6.1.4.1.9.6.1.101.47.1.15.1 no-access
An entry (conceptual row) containing the IP Counters information containing amount of IP datagrams passed by certain IP FFT.
                     rlInetFftCountersIndex 1.3.6.1.4.1.9.6.1.101.47.1.15.1.1 integer read-only
The value of the index of the IP FFT.
                     rlInetFftInReceives 1.3.6.1.4.1.9.6.1.101.47.1.15.1.2 integer read-only
The amount of received IP datagrams
                     rlInetFftForwDatagrams 1.3.6.1.4.1.9.6.1.101.47.1.15.1.3 integer read-only
The amount of forwarded IP datagrams
                     rlInetFftInDiscards 1.3.6.1.4.1.9.6.1.101.47.1.15.1.4 integer read-only
The amount of discarded IP datagrams
           rlInetFftNextHopTable 1.3.6.1.4.1.9.6.1.101.47.1.16 no-access
The (conceptual) table contains NextHop information used for routing IP datagrams.
                 rlInetFftNextHopEntry 1.3.6.1.4.1.9.6.1.101.47.1.16.1 no-access
An entry (conceptual row) contains the NextHop info information for routing IP datagrams.
                     rlInetFftNextHopifindex 1.3.6.1.4.1.9.6.1.101.47.1.16.1.1 integer read-only
The value of the IP Interface index of the NextHop.
                     rlInetFftNextHopInetAddressType 1.3.6.1.4.1.9.6.1.101.47.1.16.1.2 inetaddresstype read-only
The IP address type of a NextHop for which an entry contains IP forwarding information.
                     rlInetFftNextHopInetAddress 1.3.6.1.4.1.9.6.1.101.47.1.16.1.3 inetaddress read-only
The IP address of a NextHop for which an entry contains IP forwarding information.
                     rlInetFftNextHopValid 1.3.6.1.4.1.9.6.1.101.47.1.16.1.4 integer read-only
The NextHop Valid bit. When L2 info is missing, a NextHop has Invalid value. Enumeration: 'valid': 1, 'invalid': 2.
                     rlInetFftNextHopType 1.3.6.1.4.1.9.6.1.101.47.1.16.1.5 integer read-only
The NextHop type. Enumeration: 'remote': 2, 'drop': 4, 'local': 1, 'reject': 3.
                     rlInetFftNextHopReferenceCount 1.3.6.1.4.1.9.6.1.101.47.1.16.1.6 integer read-only
IF LPM is supported: If ecmp supported: the field NextHop_ref_count used to save number of NextHop SETs that use the NextHop. Otherwise, NextHop_ref_count used to save number of NFFT entries that use the NextHop. IF LPM is NOT supported: NextHop_ref_count used to save number of Remote SFFT entries that use the NextHop.
                     rlInetFftNextHopNetAddress 1.3.6.1.4.1.9.6.1.101.47.1.16.1.7 physaddress read-only
The NextHop Physical Address.
                     rlInetFftNextHopVid 1.3.6.1.4.1.9.6.1.101.47.1.16.1.8 integer read-only
The vid of the output port.
                     rlInetFftNextHopMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.16.1.9 physaddress read-only
The MAC destination address.
                     rlInetFftNextHopOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.1.16.1.10 integer read-only
The value of ifIndex of output physical port.
           rlInetFftL2InfoTable 1.3.6.1.4.1.9.6.1.101.47.1.17 no-access
The (conceptual) table contains L2 information used for routing IP datagrams.
                 rlInetFftL2InfoEntry 1.3.6.1.4.1.9.6.1.101.47.1.17.1 no-access
An entry (conceptual row) contains the L2 info information for routing IP datagrams.
                     rlInetFftL2InfoIfindex 1.3.6.1.4.1.9.6.1.101.47.1.17.1.1 integer read-only
The VLAN Ifindex of the destination port.
                     rlInetFftL2InfoDstMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.17.1.2 physaddress read-only
The MAC destination address.
                     rlInetFftL2InfoValid 1.3.6.1.4.1.9.6.1.101.47.1.17.1.3 integer read-only
The L2 info entry valid bit. When L2 info is missing some information, an L2 info has Invalid value. Enumeration: 'valid': 1, 'invalid': 2.
                     rlInetFftL2InfoType 1.3.6.1.4.1.9.6.1.101.47.1.17.1.4 integer read-only
The L2 info type. With Enthernet media l2 info type is vlan. WIth Tunneling feature, l2 info type will be expanded. Enumeration: 'other': 1, 'vlan': 2.
                     rlInetFftL2InfoReferenceCount 1.3.6.1.4.1.9.6.1.101.47.1.17.1.5 integer read-only
The reference count contains a number of NextHop entries that use this L2 info.
                     rlInetFftL2InfoVid 1.3.6.1.4.1.9.6.1.101.47.1.17.1.6 integer read-only
The vid of the destination port.
                     rlInetFftL2InfoSrcMacAddress 1.3.6.1.4.1.9.6.1.101.47.1.17.1.7 physaddress read-only
The MAC source address placed to Ehernet Header of IP forwarded packet.
                     rlInetFftL2InfoOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.1.17.1.8 integer read-only
The value of ifIndex of output physical port the packet is forwarded through.
                     rlInetFftL2InfoTaggedMode 1.3.6.1.4.1.9.6.1.101.47.1.17.1.9 integer read-only
The tagged value of the port. When the Tagged field is not a part of the FFT table in the ASIC, the Tagged field get the BasedPortConfig value. Enumeration: 'untagged': 1, 'tagged': 2, 'basedPortConfig': 3.
           rlIpv6FftRedBoundary 1.3.6.1.4.1.9.6.1.101.47.1.18 percents read-write
The red boundary in percents.
           rlIpv6FftYellowBoundary 1.3.6.1.4.1.9.6.1.101.47.1.19 percents read-write
The yellow boundary in percents.
       rlIpxFFT 1.3.6.1.4.1.9.6.1.101.47.2
           rlIpxFftMibVersion 1.3.6.1.4.1.9.6.1.101.47.2.1 integer read-only
MIB's version, the current version is 1.
           rlIpxMaxFftNumber 1.3.6.1.4.1.9.6.1.101.47.2.2 integer read-only
The maximun number of IPX FFTs. An IPX FFT gets a number from 1 until rlIpxMaxFftSetNumber.
           rlIpxFftDynamicSupported 1.3.6.1.4.1.9.6.1.101.47.2.3 integer read-only
Specifies whether dynamic IPX FFTs are supported. Enumeration: 'supported': 1, 'unsupported': 2.
           rlIpxFftNetworkSupported 1.3.6.1.4.1.9.6.1.101.47.2.4 integer read-only
Specifies whether subtable per IPX network is supported. Enumeration: 'supported': 1, 'unsupported': 2.
           rlIpxFftUnknownAddrMsgUsed 1.3.6.1.4.1.9.6.1.101.47.2.5 integer read-only
Specifies whether the 3SW uses the unknown address message. Enumeration: 'unused': 2, 'used': 1.
           rlIpxFftAgingTimeSupported 1.3.6.1.4.1.9.6.1.101.47.2.6 integer read-only
Specifies whether aging time is supported for subtable per station. Enumeration: 'supported': 1, 'unsupported': 2.
           rlIpxFftSrcAddrSupported 1.3.6.1.4.1.9.6.1.101.47.2.7 integer read-only
Specifies whether an IPX subtable per station contains source IPX address. Enumeration: 'supported': 1, 'unsupported': 2.
           rlIpxFftAgingTimeout 1.3.6.1.4.1.9.6.1.101.47.2.8 integer read-write
The aging timeout in seconds.
           rlIpxFftRedBoundary 1.3.6.1.4.1.9.6.1.101.47.2.9 integer read-write
The red boundary in percents.
           rlIpxFftYellowBoundary 1.3.6.1.4.1.9.6.1.101.47.2.10 percents read-write
The yellow boundary in percents.
           rlIpxFftNumTable 1.3.6.1.4.1.9.6.1.101.47.2.12 no-access
The (conceptual) table containing number routes of the IPX Fast Forwarding Table.
                 rlIpxFftNumEntry 1.3.6.1.4.1.9.6.1.101.47.2.12.1 no-access
An entry (conceptual row) containing the containing number routes of of IPX SFFT and IPX NFFT
                     rlIpxFftNumIndex 1.3.6.1.4.1.9.6.1.101.47.2.12.1.1 integer read-only
The value of the index of the IPX FFT.
                     rlIpxFftNumStnRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.2.12.1.2 integer read-only
The number of routes containing in the IPX SFFT.
                     rlIpxFftNumSubRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.2.12.1.3 integer read-only
The number of routes containing in the IPX NFFT.
           rlIpxFftStnTable 1.3.6.1.4.1.9.6.1.101.47.2.13 no-access
The (conceptual) table containing IPX Fast Forwarding information per station for IPX.
                 rlIpxFftStnEntry 1.3.6.1.4.1.9.6.1.101.47.2.13.1 no-access
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
                     rlIpxFftStnIndex 1.3.6.1.4.1.9.6.1.101.47.2.13.1.1 integer read-only
The value of the index of the IPX FFT.
                     rlIpxFftStnDstNetid 1.3.6.1.4.1.9.6.1.101.47.2.13.1.2 netnumber read-only
The destination network for which this entry contains IPX forwarding information.
                     rlIpxFftStnDstNode 1.3.6.1.4.1.9.6.1.101.47.2.13.1.3 physaddress read-only
The destination node for which this entry contains IPX forwarding information.
                     rlIpxFftStnSrcNetid 1.3.6.1.4.1.9.6.1.101.47.2.13.1.4 netnumber read-only
The source network for which this entry contains IPX forwarding information.
                     rlIpxFftStnSrcNode 1.3.6.1.4.1.9.6.1.101.47.2.13.1.5 physaddress read-only
The destination node for which this entry contains IPX forwarding information.
                     rlIpxFftStnDstIpxAddrType 1.3.6.1.4.1.9.6.1.101.47.2.13.1.6 integer read-only
The destination address type. Enumeration: 'remote': 2, 'local': 1.
                     rlIpxFftStnEncapsulation 1.3.6.1.4.1.9.6.1.101.47.2.13.1.7 integer read-only
The encapsulation method associated with this route. Enumeration: 'novell': 1, 'ethernet': 2, 'llc': 3, 'snap': 4.
                     rlIpxFftStnDstMacAddress 1.3.6.1.4.1.9.6.1.101.47.2.13.1.8 physaddress read-only
The MAC destination address.
                     rlIpxFftStnSrcMacAddress 1.3.6.1.4.1.9.6.1.101.47.2.13.1.9 physaddress read-only
The MAC source address.
                     rlIpxFftStnOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.2.13.1.10 integer read-only
The value of ifIndex of output physical port.
                     rlIpxFftStnTci 1.3.6.1.4.1.9.6.1.101.47.2.13.1.11 integer read-only
The value of TCI or 0.
                     rlIpxFftStnFacsIndex 1.3.6.1.4.1.9.6.1.101.47.2.13.1.12 integer read-only
The value of index of the FACS Table.
                     rlIpxFftStnAge 1.3.6.1.4.1.9.6.1.101.47.2.13.1.13 integer read-only
The age of the entry in seconds.
           rlIpxFftSubTable 1.3.6.1.4.1.9.6.1.101.47.2.14 no-access
The (conceptual) table containing IPX Fast Forwarding information per network for IPX .
                 rlIpxFftSubEntry 1.3.6.1.4.1.9.6.1.101.47.2.14.1 no-access
An entry (conceptual row) containing the IP fast forwarding information for IP datagrams from a particular source and destination addresses.
                     rlIpxFftSubIndex 1.3.6.1.4.1.9.6.1.101.47.2.14.1.1 integer read-only
The value of the index of the IPX FFT.
                     rlIpxFftSubDstNetid 1.3.6.1.4.1.9.6.1.101.47.2.14.1.2 netnumber read-only
The destination network for which this entry contains IPX forwarding information.
                     rlIpxFftSubEncapsulation 1.3.6.1.4.1.9.6.1.101.47.2.14.1.3 integer read-only
The encapsulation method associated with this route. Enumeration: 'novell': 1, 'ethernet': 2, 'llc': 3, 'snap': 4.
                     rlIpxFftSubDstMacAddress 1.3.6.1.4.1.9.6.1.101.47.2.14.1.4 physaddress read-only
The MAC destination address.
                     rlIpxFftSubSrcMacAddress 1.3.6.1.4.1.9.6.1.101.47.2.14.1.5 physaddress read-only
The MAC source address.
                     rlIpxFftSubOutIfIndex 1.3.6.1.4.1.9.6.1.101.47.2.14.1.6 integer read-only
The value of ifIndex of output physical port.
                     rlIpxFftSubTci 1.3.6.1.4.1.9.6.1.101.47.2.14.1.7 integer read-only
The value of TCI or 0.
                     rlIpxFftSubFacsIndex 1.3.6.1.4.1.9.6.1.101.47.2.14.1.8 integer read-only
The value of index of the FACS Table.
                     rlIpxFftSubAge 1.3.6.1.4.1.9.6.1.101.47.2.14.1.9 integer read-only
The age of the entry in seconds.
           rlIpxFftCountersTable 1.3.6.1.4.1.9.6.1.101.47.2.15 no-access
The (conceptual) table containing IPX Counters information per one IPX FFT.
                 rlIpxFftCountersEntry 1.3.6.1.4.1.9.6.1.101.47.2.15.1 no-access
An entry (conceptual row) containing the IP Counters information containing amount of IPX datagrams passed by certain IPX FFT.
                     rlIpxFftCountersIndex 1.3.6.1.4.1.9.6.1.101.47.2.15.1.1 integer read-only
The value of the index of the IPX FFT.
                     rlIpxFftInReceives 1.3.6.1.4.1.9.6.1.101.47.2.15.1.2 integer read-only
The amount of received IPX datagrams
                     rlIpxFftForwDatagrams 1.3.6.1.4.1.9.6.1.101.47.2.15.1.3 integer read-only
The amount of forwarded IPX datagrams
                     rlIpxFftInDiscards 1.3.6.1.4.1.9.6.1.101.47.2.15.1.4 integer read-only
The amount of discarded IPX datagrams
       rlIpmFFT 1.3.6.1.4.1.9.6.1.101.47.3
           rlIpmFftMibVersion 1.3.6.1.4.1.9.6.1.101.47.3.1 integer read-only
MIB's version, the current version is 1.
           rlIpmMaxFftNumber 1.3.6.1.4.1.9.6.1.101.47.3.2 integer read-only
The maximun number of IPM FFTs. NT_IPM gets a number from Host Parameters
           rlIpmFftDynamicSupported 1.3.6.1.4.1.9.6.1.101.47.3.3 integer read-only
Specifies whether dynamic IPM FFTs are supported. An NT_IPM gets a number from Host Parameters Enumeration: 'supported': 1, 'unsupported': 2.
           rlIpmFftUnknownAddrMsgUsed 1.3.6.1.4.1.9.6.1.101.47.3.4 integer read-only
Specifies whether the 3SW uses the unknown address message. An NT_IPM gets a number from Host Parameters Enumeration: 'unused': 2, 'used': 1.
           rlIpmFftUserAgingTimeout 1.3.6.1.4.1.9.6.1.101.47.3.5 unsigned32 read-write
The aging timeout in seconds. SNMP user writes. There is a default value of aging timeout.
           rlIpmFftRouterAgingTimeout 1.3.6.1.4.1.9.6.1.101.47.3.6 integer read-only
The aging timeout in seconds. NT_IPM keeps value that Router level gave. This is high priority value for aging timeout.
           rlIpmFftNumTable 1.3.6.1.4.1.9.6.1.101.47.3.8 no-access
The (conceptual) table containing number routes of the IPM Fast Forwarding Table.
               rlIpmFftNumEntry 1.3.6.1.4.1.9.6.1.101.47.3.8.1 no-access
An entry (conceptual row) containing the containing number routes of an IPM FFT.
                   rlIpmFftNumIndex 1.3.6.1.4.1.9.6.1.101.47.3.8.1.1 integer read-only
The value of the index of the IPM FFT.
                   rlIpmFftNumRoutesNumber 1.3.6.1.4.1.9.6.1.101.47.3.8.1.2 integer read-only
The number of routes containing in the IPM FFT.
           rlIpmFftTable 1.3.6.1.4.1.9.6.1.101.47.3.9 no-access
The (conceptual) table containing IPM Fast Forwarding information for IPM datagrams.
               rlIpmFftEntry 1.3.6.1.4.1.9.6.1.101.47.3.9.1 no-access
An entry (conceptual row) containing the IPM fast forwarding information for IP datagrams from a particular source and destination addresses.
                   rlIpmFftIndex 1.3.6.1.4.1.9.6.1.101.47.3.9.1.1 integer read-only
The value of the index of the IPM FFT.
                   rlIpmFftSrcIpAddress 1.3.6.1.4.1.9.6.1.101.47.3.9.1.2 ipaddress read-only
The IP source address for which this entry contains IPM forwarding information.
                   rlIpmFftDstIpAddress 1.3.6.1.4.1.9.6.1.101.47.3.9.1.3 ipaddress read-only
The IPM destination address for which this entry contains IPM forwarding information.
                   rlIpmFftSrcIpMask 1.3.6.1.4.1.9.6.1.101.47.3.9.1.4 ipaddress read-only
The IP source mask for which this entry contains IP forwarding information.
                   rlIpmFftInputIfIndex 1.3.6.1.4.1.9.6.1.101.47.3.9.1.5 integer read-only
The input ifIndex for which this entry contains IPM forwarding information.
                   rlIpmFftInputVlanTag 1.3.6.1.4.1.9.6.1.101.47.3.9.1.6 integer read-only
The input Vlan tag together with input ifIndex defines pair (ifIndex, tag)
                   rlIpmFftForwardAction 1.3.6.1.4.1.9.6.1.101.47.3.9.1.7 integer read-only
The IPM forward action. Enumeration: 'forward': 1, 'discard': 2.
                   rlIpmFftInportAction 1.3.6.1.4.1.9.6.1.101.47.3.9.1.8 integer read-only
The IPM illegal input port action. Enumeration: 'discard': 2, 'sentToCPU': 1.
                   rlIpmFftAge 1.3.6.1.4.1.9.6.1.101.47.3.9.1.9 integer read-only
The age of the entry in seconds from the moment of inserting.
           rlIpmFftPortTagTable 1.3.6.1.4.1.9.6.1.101.47.3.10 no-access
The (conceptual) table containing IPM FFT output port tag information for IPM datagrams.
                 rlIpmFftPortTagEntry 1.3.6.1.4.1.9.6.1.101.47.3.10.1 no-access
An entry (conceptual row) containing the IPM FFT output port tag information for IP datagrams from a particular source and destination addresses.
                     rlIpmFftPortIndex 1.3.6.1.4.1.9.6.1.101.47.3.10.1.1 integer read-only
The value of the index of the IPM FFT.
                     rlIpmFftPortSrcIpAddress 1.3.6.1.4.1.9.6.1.101.47.3.10.1.2 ipaddress read-only
The IP source address for which this entry contains IPM output port tag information.
                     rlIpmFftPortDstIpAddress 1.3.6.1.4.1.9.6.1.101.47.3.10.1.3 ipaddress read-only
The IPM destination address for which this entry contains IPM port tag information.
                     rlIpmFftPortOutputifIndex 1.3.6.1.4.1.9.6.1.101.47.3.10.1.4 integer read-only
The output ifIndex
                     rlIpmFftPortOutputTag 1.3.6.1.4.1.9.6.1.101.47.3.10.1.5 integer read-only
The output Vlan tag together with output ifIndex defines pair (ifIndex, tag)
           rlIpmFftCountersTable 1.3.6.1.4.1.9.6.1.101.47.3.11 no-access
The (conceptual) table containing IPM Counters information per FFT number.
                 rlIpmFftCountersEntry 1.3.6.1.4.1.9.6.1.101.47.3.11.1 no-access
An entry (conceptual row) containing the IPM Counters information containing amount of IPM datagrams passed by certain FFT.
                     rlIpmFftCountersIndex 1.3.6.1.4.1.9.6.1.101.47.3.11.1.1 integer read-only
The value of the index of the IPM FFT.
                     rlIpmFftInReceives 1.3.6.1.4.1.9.6.1.101.47.3.11.1.2 integer read-only
The amount of received IPM datagrams
                     rlIpmFftForwDatagrams 1.3.6.1.4.1.9.6.1.101.47.3.11.1.3 integer read-only
The amount of forwarded IPM datagrams
                     rlIpmFftInDiscards 1.3.6.1.4.1.9.6.1.101.47.3.11.1.4 integer read-only
The amount of discarded IPM datagrams