CISCOSB-EVENTS-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCOSB-EVENTS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlEventsMib 1.3.6.1.4.1.9.6.1.101.150
MTS events MIB.
         rlPortEvents 1.3.6.1.4.1.9.6.1.101.150.1
             rlAutoSmartPortAdminStatus 1.3.6.1.4.1.9.6.1.101.150.1.1 integer read-write
disabled - Auto Smart port feature is administratively disabled. enabled - Auto Smart port feature is administratively enabled. controlled - Auto Smart port feature is administratively controlled by VOICE VLAN. Enumeration: 'disabled': 2, 'controlled': 3, 'enabled': 1.
             rlAutoSmartPortOperStatus 1.3.6.1.4.1.9.6.1.101.150.1.2 integer read-only
disabled - Auto Smart port feature is operationally disabled. enabled - Auto Smart port feature is operationally enabled. Enumeration: 'disabled': 2, 'enabled': 1.
             rlAutoSmartPortLastVoiceVlanStatus 1.3.6.1.4.1.9.6.1.101.150.1.3 integer read-only
Indicated last status set by VOICE VLAN feature. If rlAutoSmartPortAdminStatus has 'controlled' value then the value of this object is the same as rlAutoSmartPortOperStatus. enabled - Auto Smart port feature should be operationally enabled, if rlAutoSmartPortAdminStatus has 'controlled' value. disabled - Auto Smart port feature should be operationally disabled, if rlAutoSmartPortAdminStatus has 'controlled' value Enumeration: 'disabled': 2, 'enabled': 1.
             rlAutoSmartPortLastVoiceVlanId 1.3.6.1.4.1.9.6.1.101.150.1.4 integer read-only
Indicated last VOICE VLAN ID set by VOICE VLAN feature.
             rlAutoSmartPortLearningProtocols 1.3.6.1.4.1.9.6.1.101.150.1.5 bits read-write
cdp - Information about device type of neighboring devices(s) is learnt via CDP (Cisco Discovery Protocol) advertisements. lldp - Information about device type of neighboring devices(s) is learnt via LLDP (Link Layer Discovery Protocol ) advertisements. Bits: 'lldp': 1, 'cdp': 0.
             rlAutoSmartPortTypesTable 1.3.6.1.4.1.9.6.1.101.150.1.6 no-access
The table is used to keep all the information related to a specific port type.
                 rlAutoSmartPortTypesEntry 1.3.6.1.4.1.9.6.1.101.150.1.6.1 no-access
An entry (conceptual row) in the rlAutoSmartPortTypesTable.
                     rlAutoSmartPortTypesType 1.3.6.1.4.1.9.6.1.101.150.1.6.1.1 smartporttype no-access
Smart port type.
                     rlAutoSmartPortTypeStatus 1.3.6.1.4.1.9.6.1.101.150.1.6.1.2 integer read-write
Smart port type global status. Enumeration: 'disabled': 2, 'default': 3, 'enabled': 1.
                     rlAutoSmartPortMacro 1.3.6.1.4.1.9.6.1.101.150.1.6.1.3 rlsmartportsmacronameorzero read-write
Macro to be activated when a port is set to the smart port type indicated by rlAutoSmartPortTypesType. The macro whose name is 'no_' is activated when a port ceases to be of this smart port type.
                     rlAutoSmartPortTypesRevertToDefaultMacro 1.3.6.1.4.1.9.6.1.101.150.1.6.1.4 truthvalue read-write
Setting this object will cause the smart port type macro associated with this smart port type to revert to the default macro.
                     rlAutoSmartPortTypesRevertToDefaultParams 1.3.6.1.4.1.9.6.1.101.150.1.6.1.5 truthvalue read-write
Setting this object will cause the default smart port type parameter values associated with the built-in macro of this smart port type to revert to their default values.
                     rlAutoSmartPortTypesBuiltinMacro 1.3.6.1.4.1.9.6.1.101.150.1.6.1.6 smartportmacrotype read-only
Indicates whether the macro is built-in or user defined.
             rlAutoSmartPortMacrosParamTable 1.3.6.1.4.1.9.6.1.101.150.1.7 no-access
The table is used to keep all the default parameter values related to a specific port type.
                 rlAutoSmartPortMacrosParamEntry 1.3.6.1.4.1.9.6.1.101.150.1.7.1 no-access
A parameter name & default value pair for a smart port type macro.
                     rlAutoSmartPortMacroType 1.3.6.1.4.1.9.6.1.101.150.1.7.1.1 smartportmacrotype no-access
Macro type - built-in or user defined.
                     rlAutoSmartPortMacrosParamName 1.3.6.1.4.1.9.6.1.101.150.1.7.1.2 smartportmacroparametername no-access
Name of the parameter to be supplied at smart port macro activation.
                     rlAutoSmartPortMacrosParamOrder 1.3.6.1.4.1.9.6.1.101.150.1.7.1.3 smartportmacroparameterorder read-write
Setting this object to 'first' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row. Setting this object to 'middle' instructs the system to wait for further parameters. Setting this object to 'last' informs the system that no further parameters will be sent and therefore it can start the macro or builtin parameters change process. Setting this object to 'single' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row and informs the system that no further parameters will be sent and therefore it can start macro or builtin parameters change process.
                     rlAutoSmartPortMacrosParamValue 1.3.6.1.4.1.9.6.1.101.150.1.7.1.4 smartportmacroparametervalue read-write
Default value of the parameter to be supplied at smart port macro activation.
             rlAutoSmartPortPortsTable 1.3.6.1.4.1.9.6.1.101.150.1.8 no-access
The table is used to keep all the auto smart port information related to a specific port.
                 rlAutoSmartPortPortsEntry 1.3.6.1.4.1.9.6.1.101.150.1.8.1 no-access
An entry (conceptual row) in the rlAutoSmartPortPortsTable.
                     rlAutoSmartPortPort 1.3.6.1.4.1.9.6.1.101.150.1.8.1.1 interfaceindex no-access
The port to which the smartport information is associated.
                     rlAutoSmartPortPortStatus 1.3.6.1.4.1.9.6.1.101.150.1.8.1.2 integer read-write
Indicates whether auto smart port feature is enabled or not on this port. Enumeration: 'disabled': 2, 'enabled': 1.
                     rlAutoSmartPortPortType 1.3.6.1.4.1.9.6.1.101.150.1.8.1.3 smartporttype read-write
Smart port type associated with this port. If set by user, the port will retain the smart port type at link down, link not present and reboot events.
                     rlAutoSmartPortPersistency 1.3.6.1.4.1.9.6.1.101.150.1.8.1.4 integer read-write
If set to persistent then, if the system concludes, according to the information learnt there is no relevant device connected to the port, the rlAutoSmartPortPortType will not be changed (as if the user set this rlAutoSmartPortPortType himself), except on learning another rlAutoSmartPortPortType. Enumeration: 'persistent': 1, 'not-persistent': 2.
                     rlAutoSmartPortLearntPortType 1.3.6.1.4.1.9.6.1.101.150.1.8.1.5 smartporttype read-only
Smart port type learnt via the learning protocols. This value will be different from rlAutoSmartPortPortType only if rlAutoSmartPortPortType was manually configured (i.e. if the value of rlAutoSmartPortPortAcquiringType is 'configuration'). The value of the object is used to set the value of rlAutoSmartPortPortType if the user removes the configuration.
                     rlAutoSmartPortPortAcquiringType 1.3.6.1.4.1.9.6.1.101.150.1.8.1.6 integer read-write
Indicates the way that the value of rlAutoSmartPortPortType was acquired. This object can be set only during configuration download. Enumeration: 'default': 1, 'persistency': 3, 'configuration': 2, 'learning': 4.
                     rlAutoSmartPortLastActivatedMacro 1.3.6.1.4.1.9.6.1.101.150.1.8.1.7 rlsmartportsmacronameorzero read-only
Indicates macro name of last activated macro or 'no macro' if no macro was run.
                     rlAutoSmartPortFailedCommandNumber 1.3.6.1.4.1.9.6.1.101.150.1.8.1.8 integer read-only
Indicates number of command (starting with 1) that caused the macro failure or 0 if the macro succeeded or no macro was run.
                     rlAutoSmartPortSetLearntPortType 1.3.6.1.4.1.9.6.1.101.150.1.8.1.9 truthvalue read-write
Instructs the system to set the port type to the learnt port type.
             rlAutoSmartPortParamsTable 1.3.6.1.4.1.9.6.1.101.150.1.9 no-access
This table optionally determines the parameter values for the macro that is activated when the smartport type is manually changed for a specific port or trunk via the rlAutoSmartPortPortType object.
                 rlAutoSmartPortParamsEntry 1.3.6.1.4.1.9.6.1.101.150.1.9.1 no-access
A parameter name & immediate value.
                     rlAutoSmartPortIfIndex 1.3.6.1.4.1.9.6.1.101.150.1.9.1.1 interfaceindex no-access
The port or trunk that this entry is associated with.
                     rlAutoSmartPortParamName 1.3.6.1.4.1.9.6.1.101.150.1.9.1.2 smartportmacroparametername no-access
Name of the parameter whose value must be supplied at a smart port macro activation.
                     rlAutoSmartPortParamOrder 1.3.6.1.4.1.9.6.1.101.150.1.9.1.3 smartportmacroparameterorder read-write
Setting this object to 'first' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row. Setting this object to 'middle' instructs the system to wait for further parameters. Setting this object to 'last' informs the system that no further parameters will be sent and therefore it can start applying the smartport type. Setting this object to 'single' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row and informs the system that no further parameters will be sent and informs the system that no further parameters will be sent and therefore it can start applying the smartport type.
                     rlAutoSmartPortParamValue 1.3.6.1.4.1.9.6.1.101.150.1.9.1.4 smartportmacroparametervalue no-access
Value of the parameter whose value must be supplied at a smart port macro activation.
             rlAutoSmartTrunkRefreshTable 1.3.6.1.4.1.9.6.1.101.150.1.10 no-access
Setting this object causes running the SmartPort macros of the following types: router, switch and ap. This operation is called the trunk refresh operation.
                   rlAutoSmartTrunkRefreshEntry 1.3.6.1.4.1.9.6.1.101.150.1.10.1 no-access
An entry (conceptual row) in the rlAutoSmartTrunkRefreshTable.
                       rlAutoSmartTrunkRefreshSmartPortType 1.3.6.1.4.1.9.6.1.101.150.1.10.1.1 integer no-access
If not default the trunk refresh operation will be carried out on all ports of this smart port type if rlAutoSmartTrunkRefreshIfIndex is nonzero, or on the port specifed by rlAutoSmartTrunkRefreshIfIndex if it's type matches the given this smart port type (if not matching a wrong-value error will be return). If default the trunk refresh operation will be carried out on all ports of router, switch and ap smart port type if rlAutoSmartTrunkRefreshIfIndex is nonzero, or on the port specifed by rlAutoSmartTrunkRefreshIfIndex. Enumeration: 'default': 1, 'router': 12, 'switch': 11, 'ap': 13.
                       rlAutoSmartTrunkRefreshIfIndex 1.3.6.1.4.1.9.6.1.101.150.1.10.1.2 interfaceindexorzero no-access
If 0 the trunk refresh operation will be carried out on all ports of the smart port type as specified in the rlAutoSmartTrunkRefreshSmartPortType. If nonzero the trunk refresh operation will be carried out on the specified port, if rlAutoSmartTrunkRefreshSmartPortType is default or matches the smart port type of the specified port. Any other case will result in a wrong-value error.
                       rlAutoSmartTrunkRefreshRowStatus 1.3.6.1.4.1.9.6.1.101.150.1.10.1.3 rowstatus read-only
Since this an action table only createAndGo will be accepted and the conceptual row will vanish immediately after the action execution.
             rlAutoSmartBusy 1.3.6.1.4.1.9.6.1.101.150.1.11 truthvalue read-only
If true indicates that the autosmartports system is temporarily busy performing a multiport operation and therefore can not service management requests for the time-being.