CISCO-VOICE-ATM-DIAL-CONTROL-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-VOICE-ATM-DIAL-CONTROL-MIB
Download as:   
SNMPv2-CONF, IF-MIB, CISCO-DIAL-CONTROL-MIB, SNMPv2-SMI, CISCO-VOICE-COMMON-DIAL-CONTROL-MIB, CISCO-SMI, DIAL-CONTROL-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoVoiceAtmDialControlMIB 1.3.6.1.4.1.9.10.35
This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing ATM management information over a data network.
       ciscoVoiceAtmDialControlMIBObjects 1.3.6.1.4.1.9.10.35.1
           cvAtmCallHistory 1.3.6.1.4.1.9.10.35.1.1
               cvAtmCallHistoryTable 1.3.6.1.4.1.9.10.35.1.1.1 no-access
This table is the ATM extension to the call history table of IETF Dial Control MIB. It contains ATM call leg information about specific voice over ATM call.
                   cvAtmCallHistoryEntry 1.3.6.1.4.1.9.10.35.1.1.1.1 no-access
The information regarding a single ATM call leg. An entry of this table is created when its associated call history entry in the IETF Dial Control MIB is created and the call history entry contains information for the call establishment to the peer on the data network backbone via a voice over ATM peer. Th the IETF Dial Control MIB is deleted.
                       cvAtmCallHistoryConnectionId 1.3.6.1.4.1.9.10.35.1.1.1.1.1 cvcguid read-only
The global call identifier for the ATM call.
                       cvAtmCallHistoryVpi 1.3.6.1.4.1.9.10.35.1.1.1.1.2 integer read-only
The VPI used for this ATM connection.
                       cvAtmCallHistoryVci 1.3.6.1.4.1.9.10.35.1.1.1.1.3 integer read-only
The VCI used for this ATM connection.
                       cvAtmCallHistoryLowerIfName 1.3.6.1.4.1.9.10.35.1.1.1.1.4 displaystring read-only
The ifName of the ATM interface associated with this call.
                       cvAtmCallHistorySessionTarget 1.3.6.1.4.1.9.10.35.1.1.1.1.5 displaystring read-only
The object indicates the session target of the peer that was used for the voice over ATM call. A zero length string indicates that the value is unavailable.
                       cvAtmCallHistorySubchannelID 1.3.6.1.4.1.9.10.35.1.1.1.1.6 integer read-only
The subchannel used for this ATM connection.
                       cvAtmCallHistorySessionProtocol 1.3.6.1.4.1.9.10.35.1.1.1.1.7 cvatmsessionprotocol read-only
Indicates the session protocol used on this call.
                       cvAtmCallHistoryCalledNumber 1.3.6.1.4.1.9.10.35.1.1.1.1.8 displaystring read-only
Indicates the called party number for trunk connection calls. A zero length string indicates that this data is unavailable.
                       cvAtmCallHistoryDtmfRelay 1.3.6.1.4.1.9.10.35.1.1.1.1.9 truthvalue read-only
Indicates if Dtmf Relay was enabled for the call.
                       cvAtmCallHistoryUseSeqNumbers 1.3.6.1.4.1.9.10.35.1.1.1.1.10 truthvalue read-only
Indicates if Sequence Numbers were used on the voice data packets.
           cvAtmCallActive 1.3.6.1.4.1.9.10.35.1.2
               cvAtmCallActiveTable 1.3.6.1.4.1.9.10.35.1.2.1 no-access
This table is the ATM extension to the active call table of IETF Dial Control MIB. It contains ATM call leg information about specific voice over ATM call.
                   cvAtmCallActiveEntry 1.3.6.1.4.1.9.10.35.1.2.1.1 no-access
The information regarding a single ATM call leg. An entry of this table is created when its associated call active entry in the IETF Dial Control MIB is created. The call active entry contains information for the call establishment to the peer on the data network backbone via a voice over ATM peer. The entry is deleted when its associated call active entry in the IETF Dial Control MIB is deleted.
                       cvAtmCallActiveConnectionId 1.3.6.1.4.1.9.10.35.1.2.1.1.1 cvcguid read-only
The global call identifier for the ATM call.
                       cvAtmCallActiveVpi 1.3.6.1.4.1.9.10.35.1.2.1.1.2 integer read-only
The VPI used for this ATM connection.
                       cvAtmCallActiveVci 1.3.6.1.4.1.9.10.35.1.2.1.1.3 integer read-only
The VCI used for this ATM connection.
                       cvAtmCallActiveLowerIfName 1.3.6.1.4.1.9.10.35.1.2.1.1.4 displaystring read-only
The ifName of the ATM interface associated with this call.
                       cvAtmCallActiveSessionTarget 1.3.6.1.4.1.9.10.35.1.2.1.1.5 displaystring read-only
The object indicates the session target of the peer that is used for the voice over ATM call. A null string indicates that the value is unavailable.
                       cvAtmCallActiveSubchannelID 1.3.6.1.4.1.9.10.35.1.2.1.1.6 integer read-only
The subchannel used for this ATM connection.
                       cvAtmCallActiveSessionProtocol 1.3.6.1.4.1.9.10.35.1.2.1.1.7 cvatmsessionprotocol read-only
Indicates the session protocol being used on this call.
                       cvAtmCallActiveCalledNumber 1.3.6.1.4.1.9.10.35.1.2.1.1.8 displaystring read-only
Indicates the called party number for trunk connection calls. A null string indicates that this data is unavailable.
                       cvAtmCallActiveDtmfRelay 1.3.6.1.4.1.9.10.35.1.2.1.1.9 truthvalue read-only
Indicates if Dtmf Relay is enabled for the call.
                       cvAtmCallActiveUseSeqNumbers 1.3.6.1.4.1.9.10.35.1.2.1.1.10 truthvalue read-only
Indicates if Sequence Numbers are used on the voice data packets.
           cvAtmDialPeer 1.3.6.1.4.1.9.10.35.1.3
               cvAtmPeerCfgTable 1.3.6.1.4.1.9.10.35.1.3.1 no-access
The table contains the Voice over ATM (ATM) peer specific information that is required to accept or place voice calls via the ATM backbone with the session protocol specified in cvAtmPeerCfgSessionProtocol.
                   cvAtmPeerCfgEntry 1.3.6.1.4.1.9.10.35.1.3.1.1 no-access
A single ATM specific Peer. One entry per ATM encapsulation. The entry is created when its associated 'voiceOverATM(152)' encapsulation ifEntry is created. This entry is deleted when its associated ifEntry is deleted.
                       cvAtmPeerCfgSessionProtocol 1.3.6.1.4.1.9.10.35.1.3.1.1.1 cvatmsessionprotocol read-write
The object specifies the session protocol to be used for Internet call between local and remote router via ATM backbone.
                       cvAtmPeerCfgInterfaceName 1.3.6.1.4.1.9.10.35.1.3.1.1.2 displaystring read-write
The object specifies the ifName on which the call will go out. A zero length string indicates that no interface has been assigned.
                       cvAtmPeerCfgVpi 1.3.6.1.4.1.9.10.35.1.3.1.1.3 integer read-write
The VPI used for this ATM connection.
                       cvAtmPeerCfgVci 1.3.6.1.4.1.9.10.35.1.3.1.1.4 integer read-write
The VCI used for this ATM connection.
                       cvAtmPeerCfgVcName 1.3.6.1.4.1.9.10.35.1.3.1.1.5 displaystring read-write
The VC Name used for this ATM connection.
                       cvAtmPeerCfgCoderRate 1.3.6.1.4.1.9.10.35.1.3.1.1.6 cvcspeechcoderrate read-write
This object specifies the default voice coder rate of speech for the ATM peer.
                       cvAtmPeerCfgCodecBytes 1.3.6.1.4.1.9.10.35.1.3.1.1.7 integer read-write
This object specifies the payload size for the voice packets to be transmitted during the call.
                       cvAtmPeerCfgFaxRate 1.3.6.1.4.1.9.10.35.1.3.1.1.8 cvcfaxtransmitrate read-write
This object specifies the default transmit rate of FAX for the ATM peer. If the value of this object is 'none', then the Fax relay feature is disabled; otherwise the Fax relay feature is enabled.
                       cvAtmPeerCfgFaxBytes 1.3.6.1.4.1.9.10.35.1.3.1.1.9 integer read-write
This object specifies the payload size for the fax packets to be transmitted during the call.
                       cvAtmPeerCfgInBandSignaling 1.3.6.1.4.1.9.10.35.1.3.1.1.10 cvcinbandsignaling read-write
This object specifies the type of in-band signaling used between the two end points of the call and is used by the router to determine how to interpret the ABCD signaling bits sent as part of the voice payload data.
                       cvAtmPeerCfgVADEnable 1.3.6.1.4.1.9.10.35.1.3.1.1.11 truthvalue read-write
This object specifies whether or not VAD (Voice Activity Detection) is enabled. If the object value is 'false', then the voice data is continuously transmitted to ATM backbone.
                       cvAtmPeerCfgUseSeqNumbers 1.3.6.1.4.1.9.10.35.1.3.1.1.12 truthvalue read-write
This object specifies whether or not Sequence Numbers are generated on voice packets.
                       cvAtmPeerCfgDtmfRelay 1.3.6.1.4.1.9.10.35.1.3.1.1.13 truthvalue read-write
This object specifies whether or not Dtmf Relay is enabled. If it is then dtmf digits are transported as FRF11 Annex C packets, instead of being encoded as speech.
       ciscoVoiceAtmDialControlMIBNotificationPrefix 1.3.6.1.4.1.9.10.35.2
           ciscoVoiceAtmDialControlMIBNotifications 1.3.6.1.4.1.9.10.35.2.0
       ciscoVoiceAtmDialControlMIBConformance 1.3.6.1.4.1.9.10.35.3
           ciscoVoiceAtmDialControlMIBCompliances 1.3.6.1.4.1.9.10.35.3.1
               ciscoVoiceAtmDialControlMIBCompliance 1.3.6.1.4.1.9.10.35.3.1.1
The compliance statement for entities which implement the CISCO VOICE ATM DIAL CONTROL MIB
           ciscoVoiceAtmDialControlMIBGroups 1.3.6.1.4.1.9.10.35.3.2
               cvAtmCallHistoryGroup 1.3.6.1.4.1.9.10.35.3.2.1
A collection of objects providing the ATM Call History entry capability.
               cvAtmCallActiveGroup 1.3.6.1.4.1.9.10.35.3.2.2
A collection of objects providing the ATM Call Active entry capability.
               cvAtmPeerCfgGroup 1.3.6.1.4.1.9.10.35.3.2.3
A collection of objects providing the ATM Dialpeer capability. These objects have been implemented as read-only.