CISCO-VISM-PORT-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: CISCO-VISM-PORT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BASIS-MIB, CISCOWAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
             vismPortCnfGrp 1.3.6.1.4.1.351.110.5.5.2.1
                 vismPortCnfGrpTable 1.3.6.1.4.1.351.110.5.5.2.1.1 no-access
Port configuration table for the virtual port. Only one entry is allowed in this table.
                     vismPortCnfGrpEntry 1.3.6.1.4.1.351.110.5.5.2.1.1.1 no-access
An entry for logical port.
                         vismPortNum 1.3.6.1.4.1.351.110.5.5.2.1.1.1.1 integer32 read-only
This is a logical port number. If PXM1 (Processor Switch Module) is the PXM used on the shelf this object should be set to 1. For PXM1E this object should be set to 255.
                         vismPortRowStatus 1.3.6.1.4.1.351.110.5.5.2.1.1.1.2 integer read-only
The object add, delete or modify a port. 'add' - add a port, a port acn only be added if the status is in 'del'. 'del' - delete a port, once a port is deleted the status is chane to 'del'. The port can only be deleted after deleting all the connections and the resource partition. 'mod' - modify a port and change status to 'mod'. Enumeration: 'add': 1, 'del': 2, 'mod': 3.
                         vismPortLineNum 1.3.6.1.4.1.351.110.5.5.2.1.1.1.3 integer32 read-only
This represents the line number to which this port is associated. Since the network port is not associated with any line, line number 0 is returned on a GET.
                         vismPortType 1.3.6.1.4.1.351.110.5.5.2.1.1.1.4 integer read-only
The value of this object is always set to 'voIP'. It indicates that network port. The same value is used even when VISM supports VoAAL1 or VoAAL2. Enumeration: 'userPort': 2, 'voIP': 1.
                         vismPortDs0ConfigBitMap 1.3.6.1.4.1.351.110.5.5.2.1.1.1.5 integer32 read-only
This respesents the bit map of DS0s which is used to create this port. Bit 0 represents DS0-1. Since this object is not applicable to the network port, value 0 is returned on a GET.
                         vismPortSpeed 1.3.6.1.4.1.351.110.5.5.2.1.1.1.6 integer32 read-only
The speed of the port in cells per second. It is used by VISM card to advertise virtual port bandwidth to the controller, SVC(Switched Virtual Circuit) and PVC(Permanent Virtual Circuit) connection admission control and aggregate traffic clipping. This object can be modified only when there is no existing resource partition on the port.
                         vismPortState 1.3.6.1.4.1.351.110.5.5.2.1.1.1.7 integer read-only
This object indicates the state of the port. Enumeration: 'active': 2, 'notConfigured': 1.
 ciscoVismPortMIB 1.3.6.1.4.1.351.150.92
The MIB module containing Port information for VISM service module.
       ciscoVismPortMIBConformance 1.3.6.1.4.1.351.150.92.2
           ciscoVismPortMIBGroups 1.3.6.1.4.1.351.150.92.2.1
               ciscoVismPortGroup 1.3.6.1.4.1.351.150.92.2.1.1
The collection of objects which are used to represent VISM Port information.
           ciscoVismPortMIBCompliances 1.3.6.1.4.1.351.150.92.2.2
               ciscoVismPortCompliance 1.3.6.1.4.1.351.150.92.2.2.1
The compliance statement for objects related to VISM Port module.