CISCO-ITP-SP-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-ITP-SP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoItpSpMIB 1.3.6.1.4.1.9.9.232
The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 Signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7. This MIB models the SP as follows: The SP is associated with one or more point codes. Each pointcode is associated with: an SS7 variant, timers, and linksets. Linksets contain: destination point code linkset byte/packet statistics, accounting information per Destination Point Code(DPC) and Originating Point Code (OPC) violation accounting information per DPC and OPC links, reference to incoming and outgoing ACL reference to a routing table for each SS7 packet type Links contain: timers, and byte/packet statistics. The figure below provides a diagrammatic representation of the relationships. Each box may be replicated providing multiple instances of the object. '--->' indicates that the object to the left contains a reference to the object to the right. '###>' indicates that the object to the left contains an instance of the object to the right. The down arrow indicates that the object being pointed to contains snmp indices of the objects above it. ________________ | | | Sp |###> point code, timers |________________| | V ________________ | | | |---> Accounting | Linkset |---> Violation Accounting | |---> Incoming ACL | |---> Outgoing ACL |________________|---> Routing Tables. | V ________________ | Link |###> timers |________________|---> statistics Abbreviations: AERM - Alignment Error Rate Monitor CLLI - Common Language Location Codes HSL - High Speed Link (ATM based) LLSC - link set control LSAC - Signalling link activity control LSDA - Signalling data link allocation LSLA - Signalling link activation LSLD - Signalling link deactivation LSLR - Signalling link restoration LSSU - Link Status Signal Unit LSTA - Signalling terminal allocation MTP - Message Transport Protocol MTP2 - Layer 2 of Message Transport Protocol MTP3 - Layer 3 of Message Transport Protocol PC - Point Code RTN - RouteTableName SCTP - Stream Transmission Protocol(RFC 2960) SIB - Status Indicator Busy SP - Signalling Point SS7 - System No. 7 (SS7) Network SUERM - Signal Unit Error Rate Monitor TCBC - Changeback control TCOC - Changeover control TCRC - Controlled rerouting control TFRC - Forced rerouting control TLAC - Link availability control TPRC - Signalling point restart control TRCC - Signalling route set congestion control TSFC - Signalling traffic flow control TSRC - Signalling routing control
         cItpSpMIBNotifs 1.3.6.1.4.1.9.9.232.0
             cItpSpNotifications 1.3.6.1.4.1.9.9.232.0.0
                 cItpSpLinksetStateChange 1.3.6.1.4.1.9.9.232.0.0.1
The notification generated when a linkset changes to a new state. The value of cItpSpLinksetState indicates the new state.
                 cItpSpLinkStateChange 1.3.6.1.4.1.9.9.232.0.0.2
The notification generated when a link changes to a new state. The value of cItpSpLinkState indicates the new state.
                 cItpSpCongestionChange 1.3.6.1.4.1.9.9.232.0.0.3
The notification generated when a link changes to a new congestion level as specified by cItpSpLinkCongestionState object.
                 cItpSpLinkRcvdUtilChange 1.3.6.1.4.1.9.9.232.0.0.4
The notification provide is generated when the cItpSpLinkUtilStateRcvd changes states.
                 cItpSpLinkSentUtilChange 1.3.6.1.4.1.9.9.232.0.0.5
The notification provide is generated when the cItpSpLinkUtilStateSent changes states.
         cItpSpMIBObjects 1.3.6.1.4.1.9.9.232.1
             cItpSpScalars 1.3.6.1.4.1.9.9.232.1.1
                 cItpSpVariant 1.3.6.1.4.1.9.9.232.1.1.1 citptcss7variant read-write
The SS7 variant implemented in this SP.
                 cItpSpCLLICode 1.3.6.1.4.1.9.9.232.1.1.2 citptcclli read-write
Common Language Location Codes (CLLI Codes).
                 cItpSpDisplayName 1.3.6.1.4.1.9.9.232.1.1.3 snmpadminstring read-write
A short identifier for the Signalling point. This value can be set by system administrator or defaults to the local point code formatted as an ASCII string.
                 cItpSpDescription 1.3.6.1.4.1.9.9.232.1.1.4 snmpadminstring read-write
A textual description for the Signalling point.
                 cItpSpMtp2T01 1.3.6.1.4.1.9.9.232.1.1.5 citptctimermtp2t01 read-write
Alignment ready timer.
                 cItpSpMtp2T02 1.3.6.1.4.1.9.9.232.1.1.6 citptctimermtp2t02 read-write
Not aligned timer.
                 cItpSpMtp2T03 1.3.6.1.4.1.9.9.232.1.1.7 citptctimermtp2t03 read-write
Aligned timer.
                 cItpSpMtp2T04E 1.3.6.1.4.1.9.9.232.1.1.8 citptctimermtp2t04e read-write
Proving period timer emergency timer.
                 cItpSpMtp2T04N 1.3.6.1.4.1.9.9.232.1.1.9 citptctimermtp2t04n read-write
Proving period timer normal timer.
                 cItpSpMtp2T05 1.3.6.1.4.1.9.9.232.1.1.10 citptctimermtp2t05 read-write
Sending SIB timer.
                 cItpSpMtp2T06 1.3.6.1.4.1.9.9.232.1.1.11 citptctimermtp2t06 read-write
Remote congestion timer.
                 cItpSpMtp2T07 1.3.6.1.4.1.9.9.232.1.1.12 citptctimermtp2t07 read-write
Excessive delay of acknowledgement timer.
                 cItpSpMtp3T01 1.3.6.1.4.1.9.9.232.1.1.13 citptctimermtp3t01 read-write
Delay to avoid message mis-sequencing on changeover.
                 cItpSpMtp3T02 1.3.6.1.4.1.9.9.232.1.1.14 citptctimermtp3t02 read-write
Waiting for changeover acknowledgement.
                 cItpSpMtp3T03 1.3.6.1.4.1.9.9.232.1.1.15 citptctimermtp3t03 read-write
Time controlled diversion-delay to avoid mis-sequencing on change back.
                 cItpSpMtp3T04 1.3.6.1.4.1.9.9.232.1.1.16 citptctimermtp3t04 read-write
Waiting for change back acknowledgement (first attempt).
                 cItpSpMtp3T05 1.3.6.1.4.1.9.9.232.1.1.17 citptctimermtp3t05 read-write
Waiting for change back acknowledgement (second attempt).
                 cItpSpMtp3T06 1.3.6.1.4.1.9.9.232.1.1.18 citptctimermtp3t06 read-write
Delay to avoid message mis-sequencing on controlled rerouting.
                 cItpSpMtp3T07 1.3.6.1.4.1.9.9.232.1.1.19 citptctimermtp3t07 read-write
Waiting for Signalling data link connection acknowledgement.
                 cItpSpMtp3T08 1.3.6.1.4.1.9.9.232.1.1.20 citptctimermtp3t08 read-write
Transfer prohibited inhibition timer (transient solution).
                 cItpSpMtp3T10 1.3.6.1.4.1.9.9.232.1.1.21 citptctimermtp3t10 read-write
Waiting to repeat Signalling routeset test message.
                 cItpSpMtp3T11 1.3.6.1.4.1.9.9.232.1.1.22 citptctimermtp3t11 read-write
Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.).
                 cItpSpMtp3T12 1.3.6.1.4.1.9.9.232.1.1.23 citptctimermtp3t12 read-write
Waiting for uninhibit acknowledgement.
                 cItpSpMtp3T13 1.3.6.1.4.1.9.9.232.1.1.24 citptctimermtp3t13 read-write
Waiting for force uninhibit.
                 cItpSpMtp3T14 1.3.6.1.4.1.9.9.232.1.1.25 citptctimermtp3t14 read-write
Waiting for inhibition acknowledgement.
                 cItpSpMtp3T15 1.3.6.1.4.1.9.9.232.1.1.26 citptctimermtp3t15 read-write
Waiting to start Signalling routeset congestion test.
                 cItpSpMtp3T16 1.3.6.1.4.1.9.9.232.1.1.27 citptctimermtp3t16 read-write
Waiting for routeset congestion status update.
                 cItpSpMtp3T17 1.3.6.1.4.1.9.9.232.1.1.28 citptctimermtp3t17 read-write
Delay to avoid oscillation of initial alignment failure and link restart.
                 cItpSpMtp3T18 1.3.6.1.4.1.9.9.232.1.1.29 citptctimermtp3t18 read-write
This timers servers different function based on the variant. ANSI: Repeat TFR once by response method ITU: MTP restart link supervision
                 cItpSpMtp3T19 1.3.6.1.4.1.9.9.232.1.1.30 citptctimermtp3t19 read-write
This timers servers different function based on the variant. ANSI: failed craft timer referral timer ITU: supervision timer during MTP restart
                 cItpSpMtp3T20 1.3.6.1.4.1.9.9.232.1.1.31 citptctimermtp3t20 read-write
This timers servers different function based on the variant. ANSI: waiting to repeat local inhibit test ITU: MTP restart timer at the Signalling point
                 cItpSpMtp3T21 1.3.6.1.4.1.9.9.232.1.1.32 citptctimermtp3t21 read-write
This timers servers different function based on the variant. ANSI: waiting to repeat remote inhibit test) ITU: MTP restart timer at adjacent Signalling point
                 cItpSpMtp3T22 1.3.6.1.4.1.9.9.232.1.1.33 citptctimermtp3t22 read-write
This timers servers different function based on the variant. ANSI: restarting SP waiting for Signalling links avail ITU: local inhibit test timer
                 cItpSpMtp3T23 1.3.6.1.4.1.9.9.232.1.1.34 citptctimermtp3t23 read-write
This timers servers different function based on the variant. ANSI: restarting SP waiting to receive all TRA msgs ITU: remote inhibit test timer
                 cItpSpMtp3T24 1.3.6.1.4.1.9.9.232.1.1.35 citptctimermtp3t24 read-write
This timers servers different function based on the variant. ANSI: restarting SP waiting to broadcast all TRA msgs ITU: stabilizing timer after local processor outage
                 cItpSpMtp3T25 1.3.6.1.4.1.9.9.232.1.1.36 citptctimermtp3t25 read-write
Timer at Signalling point (SP) adjacent to restarting SP, waiting for traffic restart allowed message.
                 cItpSpMtp3T26 1.3.6.1.4.1.9.9.232.1.1.37 citptctimermtp3t26 read-write
Timer at restarting SP waiting to repeat traffic restart waiting message.
                 cItpSpMtp3T27 1.3.6.1.4.1.9.9.232.1.1.38 citptctimermtp3t27 read-write
Minimum duration of unavailability for full restart.
                 cItpSpMtp3T28 1.3.6.1.4.1.9.9.232.1.1.39 citptctimermtp3t28 read-write
Timer at SP adjacent to restarting SP waiting for traffic restart waiting message.
                 cItpSpMtp3T29 1.3.6.1.4.1.9.9.232.1.1.40 citptctimermtp3t29 read-write
Timer started when TRA sent in response to unexpected TRA or TRW.
                 cItpSpMtp3T30 1.3.6.1.4.1.9.9.232.1.1.41 citptctimermtp3t30 read-write
Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW.
                 cItpSpMtp3T31 1.3.6.1.4.1.9.9.232.1.1.42 citptctimermtp3t31 read-write
False link congestion detection timer.
                 cItpSpMtp3T32 1.3.6.1.4.1.9.9.232.1.1.43 citptctimermtp3t32 read-write
Link oscillation timer - Procedure A.
                 cItpSpMtp3T33 1.3.6.1.4.1.9.9.232.1.1.44 citptctimermtp3t33 read-write
Probation timer for link oscillation - Procedure B.
                 cItpSpMtp3T34 1.3.6.1.4.1.9.9.232.1.1.45 citptctimermtp3t34 read-write
Suspension timer for link oscillation - Procedure B.
                 cItpSpTimerLinkTest 1.3.6.1.4.1.9.9.232.1.1.46 citptctimerlinktest read-write
Signalling Link test acknowledgement timer.
                 cItpSpTimerLinkMessage 1.3.6.1.4.1.9.9.232.1.1.47 citptctimerlinkmessage read-write
Interval timer for sending test messages.
                 cItpSpTimerLinkActRetry 1.3.6.1.4.1.9.9.232.1.1.48 citptctimerlinkactretry read-write
Link activation retry timer.
                 cItpSpTFR 1.3.6.1.4.1.9.9.232.1.1.49 truthvalue read-write
Allow transfer restricted messages. 'true' TFR are allowed. 'false' TFR are disabled.
                 cItpSpCongestionsLevels 1.3.6.1.4.1.9.9.232.1.1.50 truthvalue read-write
Allow multiple congestion levels. 'true' multiple congestion levels are allowed. 'false' multiple congestion levels are disabled.
                 cItpSpFastRestart 1.3.6.1.4.1.9.9.232.1.1.51 truthvalue read-write
The support for fast restarts as follows. 'true' fast restart is enabled. 'false' fast restart is disabled.
                 cItpSpDistSccpUnseq 1.3.6.1.4.1.9.9.232.1.1.52 truthvalue read-write
Evenly distribute Class 0 SCCP messages as follows. 'true' Evenly distribute 0 SCCP messages is enabled. 'false' Evenly distribute 0 SCCP messages is disabled.
                 cItpSpSummaryRoutingException 1.3.6.1.4.1.9.9.232.1.1.53 truthvalue read-write
This object is used to control the usage of the summary route when both a summary route (or ANSI cluster route) and a full point-code route (within that summary) are configured. The object is used to indicate whether the summary route is to be used when the full point-code destination is inaccessible as follows. 'true' Use summary routing. 'false' Do not use summary routing.
                 cItpSpUtilSampleInterval 1.3.6.1.4.1.9.9.232.1.1.54 citpspsampleinterval read-write
This object specifies the time interval used to monitor the utilization of SS7 links. This object in combination with cItpSpUtilThreshold, cItpSpLinkPlanCapacitySent and cItpSpLinkPlanCapacityRcvd will be used to calculate utilization of SS7 links. Changes to the polling interval will take effect after the completion of the current sample interval.
                 cItpSpUtilThreshold 1.3.6.1.4.1.9.9.232.1.1.55 citpsppercentthreshold read-write
This object specifies the threshold of usage for all SS7 links in SP. This object is used to determine when to generate the cItpSpLinkRcvdUtilChange or cItpSpLinkSentUtilChange notifications. A value of zero indicates that no default threshold is specified. Therefore, only links with non-zero values for cItpSpLinkUtilThresholdRcvd or cItpSpLinkUtilThresholdSent will generate notifications based on link utilization. Changes to the utilization threshold will take effect at the end of the current interval.
                 cItpSpUtilAbateDelta 1.3.6.1.4.1.9.9.232.1.1.56 citpsppercentthreshold read-write
This object allows the falling threshold to be lower than the rising theshold when calculating whether to generate the cItpSpLinkUtilThresholdRcvd or cItpSpLinkUtilThresholdSent notifications. This is done to prevent generating notifications for slight changes in traffic.
             cItpSpPointCode 1.3.6.1.4.1.9.9.232.1.2
                 cItpSpPointCodeTable 1.3.6.1.4.1.9.9.232.1.2.1 no-access
A table that contain the varies types of point code defined for this Signalling point.' Entries are added to this table via cItpSpRowStatus in accordance with the RowStatus convention.
                     cItpSpPointCodeTableEntry 1.3.6.1.4.1.9.9.232.1.2.1.1 no-access
A list of SP attributes.
                         cItpSpPointCodeNi 1.3.6.1.4.1.9.9.232.1.2.1.1.1 citptcnetworkindicator no-access
The network Indicator for this pointcode.
                         cItpSpPointCodeBin 1.3.6.1.4.1.9.9.232.1.2.1.1.2 citptcpointcode no-access
The point code for this SP.
                         cItpSpPointCodeType 1.3.6.1.4.1.9.9.232.1.2.1.1.3 citptcpointcodetype read-only
The function of this point code
                         cItpSpPointCodeDisplay 1.3.6.1.4.1.9.9.232.1.2.1.1.4 citptcdisplaypc read-only
The point code for this SP.
                         cItpSpPointCodeRowStatus 1.3.6.1.4.1.9.9.232.1.2.1.1.5 rowstatus read-only
The object is used by a management station to create or delete the row entry in cItpSpPointCodeTable following the RowStatus textual convention.
             cItpSpLinkset 1.3.6.1.4.1.9.9.232.1.3
                 cItpSpLinksetTable 1.3.6.1.4.1.9.9.232.1.3.1 no-access
A table of linksets for this SP.
                     cItpSpLinksetTableEntry 1.3.6.1.4.1.9.9.232.1.3.1.1 no-access
A list of SP linkset attributes for a particular SP entity.
                         cItpSpLinksetName 1.3.6.1.4.1.9.9.232.1.3.1.1.1 citptclinksetid no-access
The name of the linkset.
                         cItpSpLinksetSourcePointCode 1.3.6.1.4.1.9.9.232.1.3.1.1.2 citptcpointcode read-only
The point code to which this linkset is connected.
                         cItpSpLinksetSourceDisplayPC 1.3.6.1.4.1.9.9.232.1.3.1.1.3 citptcdisplaypc read-only
The point code to which this linkset is connected.
                         cItpSpLinksetAdjacentPointCode 1.3.6.1.4.1.9.9.232.1.3.1.1.4 citptcpointcode read-only
The point code to which this linkset is connected.
                         cItpSpLinksetAdjacentDisplayPC 1.3.6.1.4.1.9.9.232.1.3.1.1.5 citptcdisplaypc read-only
The point code to which this linkset is connected.
                         cItpSpLinksetState 1.3.6.1.4.1.9.9.232.1.3.1.1.6 integer read-only
The list of possible linkset states. 'available' : Traffic may flow over this linkset 'shutdown' : This linkset has been forced to an unavailable state by an administrative action. 'unavailable': The linkset is currently unable to support traffic. Activation of this linkset will occur as required by protocol. Enumeration: 'available': 1, 'unavailable': 3, 'shutdown': 2.
                         cItpSpLinksetInboundAcl 1.3.6.1.4.1.9.9.232.1.3.1.1.7 citptcaclid read-only
Packets are filtered against this access control list before they are passed to the routing function. A value of zero indicates that no access control list is present.
                         cItpSpLinksetOutboundAcl 1.3.6.1.4.1.9.9.232.1.3.1.1.8 citptcaclid read-only
Packets are filtered against this access control list after they have passed through the routing function. A value of zero indicates that no access control list is present.
                         cItpSpLinksetSnmmRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.9 citptcroutetablename read-only
The routing table for Signalling network management messages.
                         cItpSpLinksetSntmRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.10 citptcroutetablename read-only
The routing table for Signalling network test and maintenance messages.
                         cItpSpLinksetSpare2RTN 1.3.6.1.4.1.9.9.232.1.3.1.1.11 citptcroutetablename read-only
This routing table has been defined as a spare routing table by the standards committee.
                         cItpSpLinksetSccpRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.12 citptcroutetablename read-only
The routing table for SS7 Signalling Connection Control Part(SCCP) messages.
                         cItpSpLinksetTupRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.13 citptcroutetablename read-only
The routing table for Telephone User Part(TUP) messages.
                         cItpSpLinksetIsupRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.14 citptcroutetablename read-only
The routing table for ISDN User Part messages.
                         cItpSpLinksetDupcRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.15 citptcroutetablename read-only
The routing table for Data User Part (call and circuit-related messages).
                         cItpSpLinksetDupfRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.16 citptcroutetablename read-only
The routing table for Data User Part (facility registration and cancellation messages).
                         cItpSpLinksetMtupRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.17 citptcroutetablename read-only
The routing table for MTP Testing User Part messages.
                         cItpSpLinksetBisupRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.18 citptcroutetablename read-only
The routing table for Broadband ISDN User Part(BISUP) messages.
                         cItpSpLinksetSisupRTN 1.3.6.1.4.1.9.9.232.1.3.1.1.19 citptcroutetablename read-only
The routing table for Satellite ISDN User Part(SISUP) messages.
                         cItpSpLinksetSpare11RTN 1.3.6.1.4.1.9.9.232.1.3.1.1.20 citptcroutetablename read-only
This routing table has been defined as a spare routing table by the standards committee.
                         cItpSpLinksetSpare12RTN 1.3.6.1.4.1.9.9.232.1.3.1.1.21 citptcroutetablename read-only
This routing table has been defined as a spare routing table by the standards committee.
                         cItpSpLinksetSpare13RTN 1.3.6.1.4.1.9.9.232.1.3.1.1.22 citptcroutetablename read-only
This routing table has been defined as a spare routing table by the standards committee.
                         cItpSpLinksetSpare14RTN 1.3.6.1.4.1.9.9.232.1.3.1.1.23 citptcroutetablename read-only
This routing table has been defined as a spare routing table by the standards committee.
                         cItpSpLinksetSpare15RTN 1.3.6.1.4.1.9.9.232.1.3.1.1.24 citptcroutetablename read-only
This routing table has been defined as a spare routing table by the standards committee.
                         cItpSpLinksetAccountingEnabled 1.3.6.1.4.1.9.9.232.1.3.1.1.25 truthvalue read-only
This indicates if accounting for this linkset is enabled. 'true' Indicates that the accounting function is enabled for this linkset and is being accumulated in cItpSpAccountingTable. 'false' Indicates that the accounting function is disabled.
                         cItpSpLinksetNumLinks 1.3.6.1.4.1.9.9.232.1.3.1.1.26 unsigned32 read-only
The number of links in this linkset.
                         cItpSpLinksetDurationInService 1.3.6.1.4.1.9.9.232.1.3.1.1.27 timeticks read-only
Time linkset was providing service related to Q752/Table 4.2.
                         cItpSpLinksetDurationOutService 1.3.6.1.4.1.9.9.232.1.3.1.1.28 timeticks read-only
Time linkset was Out-of-Service as required for Q752/Table 4.2.
                         cItpSpLinksetMtp2T01 1.3.6.1.4.1.9.9.232.1.3.1.1.29 citptctimermtp2t01 read-only
Alignment ready timer.
                         cItpSpLinksetMtp2T02 1.3.6.1.4.1.9.9.232.1.3.1.1.30 citptctimermtp2t02 read-only
Not aligned timer.
                         cItpSpLinksetMtp2T03 1.3.6.1.4.1.9.9.232.1.3.1.1.31 citptctimermtp2t03 read-only
Aligned timer.
                         cItpSpLinksetMtp2T04E 1.3.6.1.4.1.9.9.232.1.3.1.1.32 citptctimermtp2t04e read-only
Proving period timer emergency timer.
                         cItpSpLinksetMtp2T04N 1.3.6.1.4.1.9.9.232.1.3.1.1.33 citptctimermtp2t04n read-only
Proving period timer normal timer.
                         cItpSpLinksetMtp2T05 1.3.6.1.4.1.9.9.232.1.3.1.1.34 citptctimermtp2t05 read-only
Sending SIB timer.
                         cItpSpLinksetMtp2T06 1.3.6.1.4.1.9.9.232.1.3.1.1.35 citptctimermtp2t06 read-only
Remote congestion timer.
                         cItpSpLinksetMtp2T07 1.3.6.1.4.1.9.9.232.1.3.1.1.36 citptctimermtp2t07 read-only
Excessive delay of acknowledgement timer.
                         cItpSpLinksetMtp3T01 1.3.6.1.4.1.9.9.232.1.3.1.1.37 citptctimermtp3t01 read-only
Delay to avoid message mis-sequencing on changeover.
                         cItpSpLinksetMtp3T02 1.3.6.1.4.1.9.9.232.1.3.1.1.38 citptctimermtp3t02 read-only
Waiting for changeover acknowledgement.
                         cItpSpLinksetMtp3T03 1.3.6.1.4.1.9.9.232.1.3.1.1.39 citptctimermtp3t03 read-only
Time controlled diversion-delay to avoid mis-sequencing on change back.
                         cItpSpLinksetMtp3T04 1.3.6.1.4.1.9.9.232.1.3.1.1.40 citptctimermtp3t04 read-only
Waiting for change back acknowledgement (first attempt).
                         cItpSpLinksetMtp3T05 1.3.6.1.4.1.9.9.232.1.3.1.1.41 citptctimermtp3t05 read-only
Waiting for change back acknowledgement (second attempt).
                         cItpSpLinksetMtp3T06 1.3.6.1.4.1.9.9.232.1.3.1.1.42 citptctimermtp3t06 read-only
Delay to avoid message mis-sequencing on controlled rerouting.
                         cItpSpLinksetMtp3T07 1.3.6.1.4.1.9.9.232.1.3.1.1.43 citptctimermtp3t07 read-only
Waiting for Signalling data link connection acknowledgement.
                         cItpSpLinksetMtp3T08 1.3.6.1.4.1.9.9.232.1.3.1.1.44 citptctimermtp3t08 read-only
Transfer prohibited inhibition timer (transient solution).
                         cItpSpLinksetMtp3T10 1.3.6.1.4.1.9.9.232.1.3.1.1.45 citptctimermtp3t10 read-only
Waiting to repeat Signalling routeset test message.
                         cItpSpLinksetMtp3T11 1.3.6.1.4.1.9.9.232.1.3.1.1.46 citptctimermtp3t11 read-only
Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.).
                         cItpSpLinksetMtp3T12 1.3.6.1.4.1.9.9.232.1.3.1.1.47 citptctimermtp3t12 read-only
Waiting for uninhibit acknowledgement.
                         cItpSpLinksetMtp3T13 1.3.6.1.4.1.9.9.232.1.3.1.1.48 citptctimermtp3t13 read-only
Waiting for force uninhibit.
                         cItpSpLinksetMtp3T14 1.3.6.1.4.1.9.9.232.1.3.1.1.49 citptctimermtp3t14 read-only
Waiting for inhibition acknowledgement.
                         cItpSpLinksetMtp3T15 1.3.6.1.4.1.9.9.232.1.3.1.1.50 citptctimermtp3t15 read-only
Waiting to start Signalling routeset congestion test.
                         cItpSpLinksetMtp3T16 1.3.6.1.4.1.9.9.232.1.3.1.1.51 citptctimermtp3t16 read-only
Waiting for routeset congestion status update.
                         cItpSpLinksetMtp3T17 1.3.6.1.4.1.9.9.232.1.3.1.1.52 citptctimermtp3t17 read-only
Delay to avoid oscillation of initial alignment failure and link restart.
                         cItpSpLinksetMtp3T18 1.3.6.1.4.1.9.9.232.1.3.1.1.53 citptctimermtp3t18 read-only
This timers servers different function based on the variant. ANSI: Repeat TFR once by response method ITU: MTP restart link supervision
                         cItpSpLinksetMtp3T19 1.3.6.1.4.1.9.9.232.1.3.1.1.54 citptctimermtp3t19 read-only
This timers servers different function based on the variant. ANSI: failed craft timer referral timer ITU: supervision timer during MTP restart
                         cItpSpLinksetMtp3T20 1.3.6.1.4.1.9.9.232.1.3.1.1.55 citptctimermtp3t20 read-only
This timers servers different function based on the variant. ANSI: waiting to repeat local inhibit test ITU: MTP restart timer at the Signalling point
                         cItpSpLinksetMtp3T21 1.3.6.1.4.1.9.9.232.1.3.1.1.56 citptctimermtp3t21 read-only
This timers servers different function based on the variant. ANSI: waiting to repeat remote inhibit test) ITU: MTP restart timer at adjacent Signalling point
                         cItpSpLinksetMtp3T22 1.3.6.1.4.1.9.9.232.1.3.1.1.57 citptctimermtp3t22 read-only
This timers servers different function based on the variant. ANSI: restarting SP waiting for Signalling links avail ITU: local inhibit test timer
                         cItpSpLinksetMtp3T23 1.3.6.1.4.1.9.9.232.1.3.1.1.58 citptctimermtp3t23 read-only
This timers servers different function based on the variant. ANSI: restarting SP waiting to receive all TRA msgs ITU: remote inhibit test timer
                         cItpSpLinksetMtp3T24 1.3.6.1.4.1.9.9.232.1.3.1.1.59 citptctimermtp3t24 read-only
This timers servers different function based on the variant. ANSI: restarting SP waiting to broadcast all TRA msgs ITU: stabilizing timer after local processor outage
                         cItpSpLinksetMtp3T25 1.3.6.1.4.1.9.9.232.1.3.1.1.60 citptctimermtp3t25 read-only
Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message.
                         cItpSpLinksetMtp3T26 1.3.6.1.4.1.9.9.232.1.3.1.1.61 citptctimermtp3t26 read-only
Timer at restarting SP waiting to repeat traffic restart waiting message.
                         cItpSpLinksetMtp3T27 1.3.6.1.4.1.9.9.232.1.3.1.1.62 citptctimermtp3t27 read-only
Minimum duration of unavailability for full restart.
                         cItpSpLinksetMtp3T28 1.3.6.1.4.1.9.9.232.1.3.1.1.63 citptctimermtp3t28 read-only
Timer at SP adjacent to restarting SP waiting for traffic restart waiting message.
                         cItpSpLinksetMtp3T29 1.3.6.1.4.1.9.9.232.1.3.1.1.64 citptctimermtp3t29 read-only
Timer started when TRA sent in response to unexpected TRA or TRW.
                         cItpSpLinksetMtp3T30 1.3.6.1.4.1.9.9.232.1.3.1.1.65 citptctimermtp3t30 read-only
Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW.
                         cItpSpLinksetMtp3T31 1.3.6.1.4.1.9.9.232.1.3.1.1.66 citptctimermtp3t31 read-only
False link congestion detection timer.
                         cItpSpLinksetMtp3T32 1.3.6.1.4.1.9.9.232.1.3.1.1.67 citptctimermtp3t32 read-only
Link oscillation timer - Procedure A.
                         cItpSpLinksetMtp3T33 1.3.6.1.4.1.9.9.232.1.3.1.1.68 citptctimermtp3t33 read-only
Probation timer for link oscillation - Procedure B.
                         cItpSpLinksetMtp3T34 1.3.6.1.4.1.9.9.232.1.3.1.1.69 citptctimermtp3t34 read-only
Suspension timer for link oscillation - Procedure B.
                         cItpSpLinksetTimerLinkTest 1.3.6.1.4.1.9.9.232.1.3.1.1.70 citptctimerlinktest read-only
Signalling Link test acknowledgement timer.
                         cItpSpLinksetTimerLinkMessage 1.3.6.1.4.1.9.9.232.1.3.1.1.71 citptctimerlinkmessage read-only
Interval timer for sending test messages.
                         cItpSpLinksetTimerLinkActRetry 1.3.6.1.4.1.9.9.232.1.3.1.1.72 citptctimerlinkactretry read-only
Link activation retry timer.
                         cItpSpLinksetPlanCapacity 1.3.6.1.4.1.9.9.232.1.3.1.1.73 integer32 read-only
An estimate of the number of bits per second that is expected to be transmitted over a linkset. This attribute will be used by network management stations to generate traps and maintain statistics on linksets based on Stream Control Transmission Protocol. The information for this attribute is specified via CLI by the system administrator. A value of zero for this object indicates that a planning capacity has not been specified. This objects has been deprecated and replaced by cItpSpLinkPlanCapacityRcvd and cItpSpLinkPlanCapacitySent objects.
                         cItpSpLinksetActPriority 1.3.6.1.4.1.9.9.232.1.3.1.1.74 unsigned32 read-only
Defines the activation priority for linksets. Each linkset can be defined a priority. The linkset with the lowest values will be activated first. If two linksets share the same values they will be activated in the order they were defined.
                         cItpSpLinksetType 1.3.6.1.4.1.9.9.232.1.3.1.1.75 integer read-only
The list of possible Signalling link types. All links in the same linkset will be of the same type. 'A-link' : Access link 'B-link' : Bridge link 'C-link' : Cross link 'D-link' : Diagonal link 'E-link' : Fully associated link Enumeration: 'access': 1, 'bridge': 2, 'fullyAssoc': 5, 'cross': 3, 'diagonal': 4.
                         cItpSpLinksetRowStatus 1.3.6.1.4.1.9.9.232.1.3.1.1.76 rowstatus read-only
The object is used by a management station to create or delete the row entry in cItpSpLinksetTable following the RowStatus textual convention.
                         cItpSpLinksetNi 1.3.6.1.4.1.9.9.232.1.3.1.1.77 citptcnetworkindicator read-only
The Network Indicator in which the Linkset resides.
                         cItpSpLinksetDisplayName 1.3.6.1.4.1.9.9.232.1.3.1.1.78 snmpadminstring read-only
A short identifier for each linkset. This value can be set by system administrator or defaults to the linkset name.
                         cItpSpLinksetDescription 1.3.6.1.4.1.9.9.232.1.3.1.1.79 snmpadminstring read-only
A textual description for the Signalling point.
                         cItpSpLinksetVariant 1.3.6.1.4.1.9.9.232.1.3.1.1.80 citptcss7variant read-only
The SS7 variant used to format data transmitted on this linkset.
             cItpSpLink 1.3.6.1.4.1.9.9.232.1.4
                 cItpSpLinkTable 1.3.6.1.4.1.9.9.232.1.4.1 no-access
A table of SP links for this SP.
                     cItpSpLinkTableEntry 1.3.6.1.4.1.9.9.232.1.4.1.1 no-access
A list of SP link attributes.
                         cItpSpLinkSlc 1.3.6.1.4.1.9.9.232.1.4.1.1.1 citptclinkslc no-access
The Signalling Link Code for this link.
                         cItpSpLinkDescription 1.3.6.1.4.1.9.9.232.1.4.1.1.2 snmpadminstring read-only
A textual description for this link.
                         cItpSpLinkState 1.3.6.1.4.1.9.9.232.1.4.1.1.3 integer read-only
The list of possible links states. 'available' : Traffic may flow over this linkset 'failed' : Traffic management has detected a failure that prevents activating this linkset. 'shutdown' : This linkset has been forced to an unavailable state by an administrative action. 'unavailable': The linkset is currently unable to support traffic. Activation of this linkset will occur as required by protocol. Enumeration: 'available': 1, 'failed': 2, 'unavailable': 4, 'shutdown': 3.
                         cItpSpLinkType 1.3.6.1.4.1.9.9.232.1.4.1.1.4 citptclinktype read-only
The link type.
                         cItpSpLinkifIndex 1.3.6.1.4.1.9.9.232.1.4.1.1.5 interfaceindexorzero read-only
If the link type specified by cItpSpLinkType is serial or hsl, this is the ifIndex specified in IF-MIB, otherwise no significance is to be placed on this value.
                         cItpSpLinkSctpAssociation 1.3.6.1.4.1.9.9.232.1.4.1.1.6 integer32 read-only
If the link type specified by cItpSpLinkType is 'sctpIp', this is the association identifier defined in the Stream Control Transmission Protocol(SCTP) MIB. Where value greater than zero indicates a valid association and zero one indicates an invalid association. This value will always be set to zero one when cItpSpLinkType is not equal to the 'sctpIp' value.
                         cItpSpLinkMtp3PacketsRcvd 1.3.6.1.4.1.9.9.232.1.4.1.1.7 counter32 read-only
The number of MTP3 packets received by this link. This measurement is specified in Q752/3.5
                         cItpSpLinkMtp3PacketsSent 1.3.6.1.4.1.9.9.232.1.4.1.1.8 counter32 read-only
The number of MTP3 packets sent by this link. This measurement is specified in Q752/3.3
                         cItpSpLinkMtp3BytesRcvd 1.3.6.1.4.1.9.9.232.1.4.1.1.9 counter32 read-only
The number of MTP3 bytes received by this link. This measurement is specified in Q752/3.4
                         cItpSpLinkMtp3BytesSent 1.3.6.1.4.1.9.9.232.1.4.1.1.10 counter32 read-only
The number of MTP3 bytes sent by this link. This measurement is specified in Q752/3.1
                         cItpSpLinkMtp2T01 1.3.6.1.4.1.9.9.232.1.4.1.1.11 citptctimermtp2t01 read-only
Alignment ready timer.
                         cItpSpLinkMtp2T02 1.3.6.1.4.1.9.9.232.1.4.1.1.12 citptctimermtp2t02 read-only
Not aligned timer.
                         cItpSpLinkMtp2T03 1.3.6.1.4.1.9.9.232.1.4.1.1.13 citptctimermtp2t03 read-only
Aligned timer.
                         cItpSpLinkMtp2T04E 1.3.6.1.4.1.9.9.232.1.4.1.1.14 citptctimermtp2t04e read-only
Proving period timer emergency timer.
                         cItpSpLinkMtp2T04N 1.3.6.1.4.1.9.9.232.1.4.1.1.15 citptctimermtp2t04n read-only
Proving period timer normal timer.
                         cItpSpLinkMtp2T05 1.3.6.1.4.1.9.9.232.1.4.1.1.16 citptctimermtp2t05 read-only
Sending SIB timer.
                         cItpSpLinkMtp2T06 1.3.6.1.4.1.9.9.232.1.4.1.1.17 citptctimermtp2t06 read-only
Remote congestion timer.
                         cItpSpLinkMtp2T07 1.3.6.1.4.1.9.9.232.1.4.1.1.18 citptctimermtp2t07 read-only
Excessive delay of acknowledgement timer.
                         cItpSpLinkMtp3T01 1.3.6.1.4.1.9.9.232.1.4.1.1.19 citptctimermtp3t01 read-only
Delay to avoid message mis-sequencing on changeover.
                         cItpSpLinkMtp3T02 1.3.6.1.4.1.9.9.232.1.4.1.1.20 citptctimermtp3t02 read-only
Waiting for changeover acknowledgement.
                         cItpSpLinkMtp3T03 1.3.6.1.4.1.9.9.232.1.4.1.1.21 citptctimermtp3t03 read-only
Time controlled diversion-delay to avoid mis-sequencing on change back.
                         cItpSpLinkMtp3T04 1.3.6.1.4.1.9.9.232.1.4.1.1.22 citptctimermtp3t04 read-only
Waiting for change back acknowledgement (first attempt).
                         cItpSpLinkMtp3T05 1.3.6.1.4.1.9.9.232.1.4.1.1.23 citptctimermtp3t05 read-only
Waiting for change back acknowledgement (second attempt).
                         cItpSpLinkMtp3T06 1.3.6.1.4.1.9.9.232.1.4.1.1.24 citptctimermtp3t06 read-only
Delay to avoid message mis-sequencing on controlled rerouting.
                         cItpSpLinkMtp3T07 1.3.6.1.4.1.9.9.232.1.4.1.1.25 citptctimermtp3t07 read-only
Waiting for Signalling data link connection acknowledgement.
                         cItpSpLinkMtp3T08 1.3.6.1.4.1.9.9.232.1.4.1.1.26 citptctimermtp3t08 read-only
Transfer prohibited inhibition timer (transient solution).
                         cItpSpLinkMtp3T10 1.3.6.1.4.1.9.9.232.1.4.1.1.27 citptctimermtp3t10 read-only
Waiting to repeat Signalling routeset test message.
                         cItpSpLinkMtp3T11 1.3.6.1.4.1.9.9.232.1.4.1.1.28 citptctimermtp3t11 read-only
Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.).
                         cItpSpLinkMtp3T12 1.3.6.1.4.1.9.9.232.1.4.1.1.29 citptctimermtp3t12 read-only
Waiting for uninhibit acknowledgement.
                         cItpSpLinkMtp3T13 1.3.6.1.4.1.9.9.232.1.4.1.1.30 citptctimermtp3t13 read-only
Waiting for force uninhibit.
                         cItpSpLinkMtp3T14 1.3.6.1.4.1.9.9.232.1.4.1.1.31 citptctimermtp3t14 read-only
Waiting for inhibition acknowledgement.
                         cItpSpLinkMtp3T15 1.3.6.1.4.1.9.9.232.1.4.1.1.32 citptctimermtp3t15 read-only
Waiting to start Signalling routeset congestion test.
                         cItpSpLinkMtp3T16 1.3.6.1.4.1.9.9.232.1.4.1.1.33 citptctimermtp3t16 read-only
Waiting for routeset congestion status update.
                         cItpSpLinkMtp3T17 1.3.6.1.4.1.9.9.232.1.4.1.1.34 citptctimermtp3t17 read-only
Delay to avoid oscillation of initial alignment failure and link restart.
                         cItpSpLinkMtp3T18 1.3.6.1.4.1.9.9.232.1.4.1.1.35 citptctimermtp3t18 read-only
This timers servers different function based on the variant. ANSI: Repeat TFR once by response method ITU: MTP restart link supervision
                         cItpSpLinkMtp3T19 1.3.6.1.4.1.9.9.232.1.4.1.1.36 citptctimermtp3t19 read-only
This timers servers different function based on the variant. ANSI: failed craft timer referral timer ITU: supervision timer during MTP restart
                         cItpSpLinkMtp3T20 1.3.6.1.4.1.9.9.232.1.4.1.1.37 citptctimermtp3t20 read-only
This timers servers different function based on the variant. ANSI: waiting to repeat local inhibit test ITU: MTP restart timer at the Signalling point
                         cItpSpLinkMtp3T21 1.3.6.1.4.1.9.9.232.1.4.1.1.38 citptctimermtp3t21 read-only
This timers servers different function based on the variant. ANSI: waiting to repeat remote inhibit test) ITU: MTP restart timer at adjacent Signalling point
                         cItpSpLinkMtp3T22 1.3.6.1.4.1.9.9.232.1.4.1.1.39 citptctimermtp3t22 read-only
This timers servers different function based on the variant. ANSI: restarting SP waiting for Signalling links avail ITU: local inhibit test timer
                         cItpSpLinkMtp3T23 1.3.6.1.4.1.9.9.232.1.4.1.1.40 citptctimermtp3t23 read-only
This timers servers different function based on the variant. ANSI: restarting SP waiting to receive all TRA msgs ITU: remote inhibit test timer
                         cItpSpLinkMtp3T24 1.3.6.1.4.1.9.9.232.1.4.1.1.41 citptctimermtp3t24 read-only
This timers servers different function based on the variant. ANSI: restarting SP waiting to broadcast all TRA msgs ITU: stabilizing timer after local processor outage
                         cItpSpLinkMtp3T25 1.3.6.1.4.1.9.9.232.1.4.1.1.42 citptctimermtp3t25 read-only
Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message.
                         cItpSpLinkMtp3T26 1.3.6.1.4.1.9.9.232.1.4.1.1.43 citptctimermtp3t26 read-only
Timer at restarting SP waiting to repeat traffic restart waiting message.
                         cItpSpLinkMtp3T27 1.3.6.1.4.1.9.9.232.1.4.1.1.44 citptctimermtp3t27 read-only
Minimum duration of unavailability for full restart.
                         cItpSpLinkMtp3T28 1.3.6.1.4.1.9.9.232.1.4.1.1.45 citptctimermtp3t28 read-only
Timer at SP adjacent to restarting SP waiting for traffic restart waiting message.
                         cItpSpLinkMtp3T29 1.3.6.1.4.1.9.9.232.1.4.1.1.46 citptctimermtp3t29 read-only
Timer started when TRA sent in response to unexpected TRA or TRW.
                         cItpSpLinkMtp3T30 1.3.6.1.4.1.9.9.232.1.4.1.1.47 citptctimermtp3t30 read-only
Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW.
                         cItpSpLinkMtp3T31 1.3.6.1.4.1.9.9.232.1.4.1.1.48 citptctimermtp3t31 read-only
False link congestion detection timer.
                         cItpSpLinkMtp3T32 1.3.6.1.4.1.9.9.232.1.4.1.1.49 citptctimermtp3t32 read-only
Link oscillation timer - Procedure A.
                         cItpSpLinkMtp3T33 1.3.6.1.4.1.9.9.232.1.4.1.1.50 citptctimermtp3t33 read-only
Probation timer for link oscillation - Procedure B.
                         cItpSpLinkMtp3T34 1.3.6.1.4.1.9.9.232.1.4.1.1.51 citptctimermtp3t34 read-only
Suspension timer for link oscillation - Procedure B.
                         cItpSpLinkTimerLinkTest 1.3.6.1.4.1.9.9.232.1.4.1.1.52 citptctimerlinktest read-only
Signalling Link test acknowledgement timer.
                         cItpSpLinkTimerLinkMessage 1.3.6.1.4.1.9.9.232.1.4.1.1.53 citptctimerlinkmessage read-only
Interval timer for sending test messages.
                         cItpSpLinkTimerLinkActRetry 1.3.6.1.4.1.9.9.232.1.4.1.1.54 citptctimerlinkactretry read-only
Link activation retry timer.
                         cItpSpLinkXmitQueueDepth 1.3.6.1.4.1.9.9.232.1.4.1.1.55 gauge32 read-only
Number of packets waiting to be sent over this link.
                         cItpSpLinkXmitQueueDepthHigh 1.3.6.1.4.1.9.9.232.1.4.1.1.56 unsigned32 read-only
This is the maximum number of packets waiting to be sent over this link since the last time this value was reset as indicated by cItpSpLinkXmitQueueDepthHighReset. Resetting this object is achieved by setting this object to 0. Attempting to set this object to any other value will result in a wrongValue error.
                         cItpSpLinkXmitQueueDepthHighRT 1.3.6.1.4.1.9.9.232.1.4.1.1.57 timestamp read-only
This indicates when cItpSpLinkXmitQueueDepthHigh was set to 0.
                         cItpSpLinkCongestionState 1.3.6.1.4.1.9.9.232.1.4.1.1.58 unsigned32 read-only
The Signalling link congestion status of this link. 0 is the least congestion level, 3 is the highest congestion level.
                         cItpSpLinkCongestionAbate1 1.3.6.1.4.1.9.9.232.1.4.1.1.59 unsigned32 read-only
Threshold used to abate congestion level 1.
                         cItpSpLinkCongestionAbate2 1.3.6.1.4.1.9.9.232.1.4.1.1.60 unsigned32 read-only
Threshold used to abate congestion level 2.
                         cItpSpLinkCongestionAbate3 1.3.6.1.4.1.9.9.232.1.4.1.1.61 unsigned32 read-only
Threshold used to abate congestion level 3.
                         cItpSpLinkCongestionOnset1 1.3.6.1.4.1.9.9.232.1.4.1.1.62 unsigned32 read-only
Threshold used to mark onset of congestion level 1.
                         cItpSpLinkCongestionOnset2 1.3.6.1.4.1.9.9.232.1.4.1.1.63 unsigned32 read-only
Threshold used to mark onset of congestion level 2.
                         cItpSpLinkCongestionOnset3 1.3.6.1.4.1.9.9.232.1.4.1.1.64 unsigned32 read-only
Threshold used to mark onset of congestion level 3.
                         cItpSpLinkSigLinkTest 1.3.6.1.4.1.9.9.232.1.4.1.1.65 truthvalue read-only
Indicated if Signalling link test is enabled on this link. true : Signalling link test is enabled. false : Signalling link test not enabled.
                         cItpSpLinkQ752T1E1 1.3.6.1.4.1.9.9.232.1.4.1.1.66 timeticks read-only
Duration of link in the In-Service state Q752/1.1.
                         cItpSpLinkQ752T1E2 1.3.6.1.4.1.9.9.232.1.4.1.1.67 counter32 read-only
Count of Signalling Link failures - All reasons Q752/1.2.
                         cItpSpLinkQ752T1E3 1.3.6.1.4.1.9.9.232.1.4.1.1.68 counter32 read-only
Count of Signalling Link failures - Abnormal FIBR/BSNR Q752/1.3.
                         cItpSpLinkQ752T1E4 1.3.6.1.4.1.9.9.232.1.4.1.1.69 counter32 read-only
Count of Signalling Link failures - Excessive delay of acknowledgement Q752/1.4.
                         cItpSpLinkQ752T1E5 1.3.6.1.4.1.9.9.232.1.4.1.1.70 counter32 read-only
Count of Signalling Link failures - Excessive error rate Q752/1.5.
                         cItpSpLinkQ752T1E6 1.3.6.1.4.1.9.9.232.1.4.1.1.71 counter32 read-only
Count of Signalling Link failures - Excessive duration of congestion Q752/1.6.
                         cItpSpLinkQ752T1E7 1.3.6.1.4.1.9.9.232.1.4.1.1.72 counter32 read-only
Count of alignment or proving errors Q752/1.7.
                         cItpSpLinkQ752T1E8 1.3.6.1.4.1.9.9.232.1.4.1.1.73 counter32 read-only
Count of signal units received in error Q752/1.8.
                         cItpSpLinkQ752T1E9 1.3.6.1.4.1.9.9.232.1.4.1.1.74 counter32 read-only
Count of negative acknowledgements received Q752/1.9.
                         cItpSpLinkQ752T1E10 1.3.6.1.4.1.9.9.232.1.4.1.1.75 counter32 read-only
Count of 'local automatic changeover' events Q752/1.10.
                         cItpSpLinkQ752T1E11 1.3.6.1.4.1.9.9.232.1.4.1.1.76 counter32 read-only
Count of 'local automatic changeback' events Q752/1.11.
                         cItpSpLinkQ752T2E1 1.3.6.1.4.1.9.9.232.1.4.1.1.77 timeticks read-only
Duration of Signalling Link unavailable(for any reason) Q752/2.1.
                         cItpSpLinkQ752T2E5 1.3.6.1.4.1.9.9.232.1.4.1.1.78 timeticks read-only
Duration of Signalling Link unavailable due to local management actions Q752/2.5.
                         cItpSpLinkQ752T2E6 1.3.6.1.4.1.9.9.232.1.4.1.1.79 timeticks read-only
Duration of Signalling Link unavailable due to remote management actions Q752/2.6.
                         cItpSpLinkQ752T2E7 1.3.6.1.4.1.9.9.232.1.4.1.1.80 timeticks read-only
Duration of Signalling Link unavailable due to link failure Q752/2.7.
                         cItpSpLinkQ752T2E9 1.3.6.1.4.1.9.9.232.1.4.1.1.81 timeticks read-only
Duration of Signalling Link unavailable due to remote processor outage Q752/2.9.
                         cItpSpLinkQ752T2E10 1.3.6.1.4.1.9.9.232.1.4.1.1.82 counter32 read-only
Count of 'remote processor outage' events Q752/2.10 and Q752/2.11. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
                         cItpSpLinkQ752T2E15 1.3.6.1.4.1.9.9.232.1.4.1.1.83 timeticks read-only
Duration of local busy Q752/2.15.
                         cItpSpLinkQ752T2E16 1.3.6.1.4.1.9.9.232.1.4.1.1.84 counter32 read-only
Count of local inhibition Q752/2.16 and Q752/2.17. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
                         cItpSpLinkQ752T2E18 1.3.6.1.4.1.9.9.232.1.4.1.1.85 counter32 read-only
Count of remote inhibition Q752/2.18 and Q752/2.19. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
                         cItpSpLinkMtp3PacketsRetrans 1.3.6.1.4.1.9.9.232.1.4.1.1.86 counter32 read-only
The number of MTP3 packets retransmitted on this link. This measurement is specified in Q752/3.2
                         cItpSpLinkMtp3BytesRetrans 1.3.6.1.4.1.9.9.232.1.4.1.1.87 counter32 read-only
The number of MTP3 bytes retransmitted on this link. This measurement is specified in Q752/3.2
                         cItpSpLinkQ752T3E6 1.3.6.1.4.1.9.9.232.1.4.1.1.88 counter32 read-only
The number times this Signalling link was marked congested. This measurement is specified in Q752/3.6
                         cItpSpLinkQ752T3E7 1.3.6.1.4.1.9.9.232.1.4.1.1.89 timeticks read-only
Cumulative duration of Signalling link congestion Q752/3.7.
                         cItpSpLinkQ752T3E10L1 1.3.6.1.4.1.9.9.232.1.4.1.1.90 counter32 read-only
The number of packets(MSUs) discarded due to Signalling link level 1 congestion Q752/3.10
                         cItpSpLinkQ752T3E10L2 1.3.6.1.4.1.9.9.232.1.4.1.1.91 counter32 read-only
The number of packets(MSUs) discard due to Signalling link level 2 congestion Q752/3.10
                         cItpSpLinkQ752T3E10L3 1.3.6.1.4.1.9.9.232.1.4.1.1.92 counter32 read-only
The number of packets(MSUs) discard due to Signalling link level 3 congestion Q752/3.10
                         cItpSpLinkQ752T3E11L1 1.3.6.1.4.1.9.9.232.1.4.1.1.93 counter32 read-only
The number times this Signalling link entered congestion level 1 and packets were discarded. This measurement is specified in Q752/3.11
                         cItpSpLinkQ752T3E11L2 1.3.6.1.4.1.9.9.232.1.4.1.1.94 counter32 read-only
The number times this Signalling link entered congestion level 2 and packets were discarded. This measurement is specified in Q752/3.11
                         cItpSpLinkQ752T3E11L3 1.3.6.1.4.1.9.9.232.1.4.1.1.95 counter32 read-only
The number times this Signalling link entered congestion level 3 and packets were discarded. This measurement is specified in Q752/3.11
                         cItpSpLinkIPType1 1.3.6.1.4.1.9.9.232.1.4.1.1.96 inetaddresstype read-only
When cItpSpLinkType is set to sctpIp then this object contains the type of the first of four possible local IP addresses used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkIPType2 1.3.6.1.4.1.9.9.232.1.4.1.1.97 inetaddresstype read-only
When cItpSpLinkType is set to sctpIp then this object contains the type of the second of four possible local IP addresses used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkIPType3 1.3.6.1.4.1.9.9.232.1.4.1.1.98 inetaddresstype read-only
When cItpSpLinkType is set to sctpIp then this object contains the type of the third of four possible local IP addresses used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkIPType4 1.3.6.1.4.1.9.9.232.1.4.1.1.99 inetaddresstype read-only
When cItpSpLinkType is set to sctpIp then this object contains the type of the fourth of four possible local IP addresses used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkIPAddr1 1.3.6.1.4.1.9.9.232.1.4.1.1.100 inetaddress read-only
When cItpSpLinkType is set to sctpIp then this object contains the first of four possible local IP addresses used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkIPAddr2 1.3.6.1.4.1.9.9.232.1.4.1.1.101 inetaddress read-only
When cItpSpLinkType is set to sctpIp then this object contains the second of four possible local IP addresses used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkIPAddr3 1.3.6.1.4.1.9.9.232.1.4.1.1.102 inetaddress read-only
When cItpSpLinkType is set to sctpIp then this object contains the third of four possible local IP addresses used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkIPAddr4 1.3.6.1.4.1.9.9.232.1.4.1.1.103 inetaddress read-only
When cItpSpLinkType is set to sctpIp then this object contains the fourth of four possible local IP addresses used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkLocalPort 1.3.6.1.4.1.9.9.232.1.4.1.1.104 unsigned32 read-only
When cItpSpLinkType is set to sctpIp then this object contains the local port number used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkRemotePort 1.3.6.1.4.1.9.9.232.1.4.1.1.105 unsigned32 read-only
When cItpSpLinkType is set to sctpIp then this object contains the remote port number used to create the association supporting this link. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkQosClass 1.3.6.1.4.1.9.9.232.1.4.1.1.106 citptcqos read-only
When cItpSpLinkType is set to sctpIp then this object contains the quality of service class to be assigned to packets sent on this association. When cItpSpLinkType is not set to sctpIp then no significance is to be placed on this value.
                         cItpSpLinkRowStatus 1.3.6.1.4.1.9.9.232.1.4.1.1.107 rowstatus read-only
The object is used by a management station to create or delete the row entry in cItpSpLinkTable following the RowStatus textual convention.
                         cItpSpLinkStateReason 1.3.6.1.4.1.9.9.232.1.4.1.1.108 bits read-only
This object provides additional information on the state of a link as follows. 'localInhibit' : Link has been inhibited by a local management operation. 'remoteInhibit' : LInk has been inhibited by a remote management operation. 'blocked' : Link is blocked because of a remote processor outage. Bits: 'remoteInhibit': 1, 'localInhibit': 0, 'blocked': 2.
                         cItpSpLinkDisplayName 1.3.6.1.4.1.9.9.232.1.4.1.1.109 snmpadminstring read-only
A short identifier for each link linkset. This value can be set by system administrator or defaults to the linkset name and SLC formatted as an ASCII string.
                         cItpSpLinkDroppedPkts 1.3.6.1.4.1.9.9.232.1.4.1.1.110 counter32 read-only
The number of packets that were dropped by this link.
                         cItpSpLinkTransmittedLssu 1.3.6.1.4.1.9.9.232.1.4.1.1.111 counter32 read-only
The number of Link Status Signal Units sent on this link.
                         cItpSpLinkReceivedLssu 1.3.6.1.4.1.9.9.232.1.4.1.1.112 counter32 read-only
The number of Link Status Signal Units received on this link.
                         cItpSpLinkProtocolDetails 1.3.6.1.4.1.9.9.232.1.4.1.1.113 bits read-only
This object provide details on the protocol states for this link as follows. Changeback control(TCBC) 'tcbcBuffering': Changeback control is buffering data on this link. Changeover control(TCOC) 'tcocBuffering': Changeover control is buffering data on this link Link availability control(TLAC) 'tlacAdjacentSpRestarting': Adjacent Signalling point is restarting. 'tlacEmergencyCoInProgress': Emergency changeover is in progress on this link. 'tlacChangebackInProgress': Changeback is in progress on this link. 'tlacChangeoverInProgress': Changeover is in progress on this link. 'tlacChangeoverFailed': The last changeover operation failed on this link. 'tlacInhibitRetry': Inhibit command will be retried. 'tlacManagementRequest': Management request in progress for this link. 'tlacSpRestarting': Signalling point is in the process of a restart. Signalling routing control(TSRC) 'tsrcChangeOverComplete': Changeove request is complete. 'tsrcAdjacentSpRestart': Adjacent Signalling Point is restarting. Bits: 'tcbcBuffering': 0, 'tlacChangeoverFailed': 6, 'tlacSpRestarting': 9, 'tsrcAdjacentSpRestart': 11, 'tlacEmergencyCoInProgress': 3, 'tlacChangeoverInProgress': 5, 'tcocBuffering': 1, 'tlacManagementRequest': 8, 'tlacAdjacentSpRestarting': 2, 'tlacChangebackInProgress': 4, 'tsrcChangeOverComplete': 10, 'tlacInhibitRetry': 7.
                         cItpSpLinkLsacState 1.3.6.1.4.1.9.9.232.1.4.1.1.114 integer read-only
Signalling link activity control state: 'undefined(1)' - link is an undefined state 'inactive(2)' - A Signalling link that is not in operation. 'active(3)' - A Signalling link that is in operation. 'activatingRestoring(4)' - A Signalling that is not operational and is being activated or restored. 'failed(5)' - A Signalling link which is available (not blocked) is marked by level 3 as failed when a changeover order is received. 'actT17wait(6)' - Link activation has failed. Link is placed into this state to wait for timer T17 to expire in order to avoid the oscillation of initial alignment failure and link restart. 'actAnsiWaitDeloaded(7) - Waiting for change back acknowledgement (second attempt). 'actItuWaitStmReady(8)' Wait for Signalling Traffic Management ready event. Enumeration: 'undefined': 1, 'actItuWaitStmReady': 8, 'failed': 5, 'activatingRestoring': 4, 'inactive': 2, 'active': 3, 'actAnsiWaitDeloaded': 7, 'actT17wait': 6.
                         cItpSpLinkTsrcState 1.3.6.1.4.1.9.9.232.1.4.1.1.115 integer read-only
Signalling traffic management routing control state: 'undefined(1)' - link is an undefined state 'idle(2)' - traffic mangement is idle 'wait5(3)' - traffic management is active and in the sending status phase Enumeration: 'wait5': 3, 'idle': 2, 'undefined': 1.
                         cItpSpLinkTcocState 1.3.6.1.4.1.9.9.232.1.4.1.1.116 integer read-only
Changeover control State: 'undefined(1)' - Link is an undefined state. 'idle(2)' - Link is available and idle. 'wait2(3)' - Wait for MTP2 to initialize link. 'waitForAck(4)' - Waiting for changeover acknowledgement. 'retrieving(5)' - Packets are being retrieved from link. 'wait5(6)' - Wait state when transitioning from idle state. 'wait7(7)' - Delay to avoid message mis-sequencing on changeover 'wait8(8)' - Wait state prior to processing changeover order or emergency changeover order events. Enumeration: 'wait5': 6, 'wait7': 7, 'undefined': 1, 'wait2': 3, 'retrieving': 5, 'wait8': 8, 'idle': 2, 'waitForAck': 4.
                         cItpSpLinkTcocLocalBSNT 1.3.6.1.4.1.9.9.232.1.4.1.1.117 citpspsequencenumber read-only
The local backward sequence number to be transmitted.
                         cItpSpLinkTcocRemoteBSNT 1.3.6.1.4.1.9.9.232.1.4.1.1.118 citpspsequencenumber read-only
The remote backward sequence number to be transmitted.
                         cItpSpLinkTcbcState 1.3.6.1.4.1.9.9.232.1.4.1.1.119 integer read-only
Changeback control State: 'undefined(1)' - link is an undefined state. 'idle(2)' - Link is available and idle. 'firstAttempt(3)' - First attempt at changeback. 'secondAttempt(4)' - Second attempt at changeback 'timeControlledDiversion(5)' - Changeback using time controlled Diversion. Enumeration: 'timeControlledDiversion': 5, 'idle': 2, 'secondAttempt': 4, 'undefined': 1, 'firstAttempt': 3.
                         cItpSpLinkReceivedSIB 1.3.6.1.4.1.9.9.232.1.4.1.1.120 counter32 read-only
The number of status indicator 'busy' link status signal units received on this link. The SIB indicates that level two is congested at the transmitting Signalling point.
                         cItpSpLinkTransmittedSIB 1.3.6.1.4.1.9.9.232.1.4.1.1.121 counter32 read-only
The number of status indicator 'busy' link status signal units transmitted on this link. The SIB indicates that level two is congested at the transmitting Signalling point.
                         cItpSpLinkMtp2ExpiredT01 1.3.6.1.4.1.9.9.232.1.4.1.1.122 counter32 read-only
The number of times the alignment ready timer has expired on this link.
                         cItpSpLinkMtp2ExpiredT02 1.3.6.1.4.1.9.9.232.1.4.1.1.123 counter32 read-only
The number of times the not alignment ready timer has expired on this link.
                         cItpSpLinkMtp2ExpiredT03 1.3.6.1.4.1.9.9.232.1.4.1.1.124 counter32 read-only
The number of times the aligned timer has expired on this link.
                         cItpSpLinkMtp2ExpiredT04 1.3.6.1.4.1.9.9.232.1.4.1.1.125 counter32 read-only
The number of times the proving period timer has expired on this link.
                         cItpSpLinkMtp2ExpiredT05 1.3.6.1.4.1.9.9.232.1.4.1.1.126 counter32 read-only
The number of times the sending status indicator busy timer has expired on this link.
                         cItpSpLinkMtp2ExpiredT06 1.3.6.1.4.1.9.9.232.1.4.1.1.127 counter32 read-only
The number of times the remote congestion timer has expired on this link.
                         cItpSpLinkMtp2ExpiredT07 1.3.6.1.4.1.9.9.232.1.4.1.1.128 counter32 read-only
The number of times the excessive delay of acknowledgement timer has expired on this link.
                         cItpSpLinkOMAERMCount 1.3.6.1.4.1.9.9.232.1.4.1.1.129 counter32 read-only
The number of times the Alignment Error Rate Monitor procedure was started on this link.
                         cItpSpLinkOMAERMFailCount 1.3.6.1.4.1.9.9.232.1.4.1.1.130 counter32 read-only
The number of times the Alignment Error Rate Monitor procedure failed on this link.
                         cItpSpLinkOMSURMCount 1.3.6.1.4.1.9.9.232.1.4.1.1.131 counter32 read-only
The number of times the Signal Unit Error Rate Monitor procedure was started on this link.
                         cItpSpLinkOMSURMFailCount 1.3.6.1.4.1.9.9.232.1.4.1.1.132 counter32 read-only
The number of times the Signal Unit Error Rate Monitor procedure failed on this link.
                         cItpSpLinkPlanCapacityRcvd 1.3.6.1.4.1.9.9.232.1.4.1.1.133 citpsplinkcapacity read-only
An estimate of the number of bits per second that is expected to be received from this link. This object will be used in combination with cItpSpUtilSampleInterval, cItpSpUtilThreshold, cItpSpUtilThreshold and cItpSpLinkUtilThresholdRcvd to generate the cItpSpLinkRcvdUtilChange notification.
                         cItpSpLinkUtilThresholdRcvd 1.3.6.1.4.1.9.9.232.1.4.1.1.134 citpsppercentthreshold read-only
This object specifies the threshold used to to generate the cItpSpLinkRcvdUtilChange notification. The value of zero indicates the threshold has not been defined at the link level and the value from the cItpSpUtilThreshold object will be used to generate the cItpSpLinkRcvdUtilChange notification.
                         cItpSpLinkUtilizationRcvd 1.3.6.1.4.1.9.9.232.1.4.1.1.135 citpsplinkutilization read-only
An estimate of the utilization of this link for traffic received on this link in the prior time period defined by the cItpSpUtilSampleInterval object.
                         cItpSpLinkUtilStateRcvd 1.3.6.1.4.1.9.9.232.1.4.1.1.136 citpsplinkutilizationstate read-only
Link Utilization State for in bound traffic.
                         cItpSpLinkL2BytesRcvd 1.3.6.1.4.1.9.9.232.1.4.1.1.137 counter32 read-only
A count of the bytes received on the link including the additional bytes required by underlying protocols. This provides a transport independent mechanism for collection information on link utilization.
                         cItpSpLinkPlanCapacitySent 1.3.6.1.4.1.9.9.232.1.4.1.1.138 citpsplinkcapacity read-only
An estimate of the number of bits per second that is expected to be sent on this link. This object will be used in combination with cItpSpUtilSampleInterval, cItpSpUtilThreshold and cItpSpLinkUtilThresholdRcvd to generate the cItpSpLinkSentUtilChange notification.
                         cItpSpLinkUtilThresholdSent 1.3.6.1.4.1.9.9.232.1.4.1.1.139 citpsppercentthreshold read-only
This object specifies the threshold used to generate the cItpSpLinkRcvdUtilChange notification. The value of zero indicates the threshold has not been defined at the link level and the value from the cItpSpUtilThreshold object will be used to generate the cItpSpLinkRcvdUtilChange notification.
                         cItpSpLinkUtilizationSent 1.3.6.1.4.1.9.9.232.1.4.1.1.140 citpsplinkutilization read-only
An estimate of the utilization of this link for traffic sent on this link in the prior time period defined by the cItpSpUtilSampleInterval object.
                         cItpSpLinkUtilStateSent 1.3.6.1.4.1.9.9.232.1.4.1.1.141 citpsplinkutilizationstate read-only
Link Utilization State for out bound traffic.
                         cItpSpLinkL2BytesSent 1.3.6.1.4.1.9.9.232.1.4.1.1.142 counter32 read-only
A count of the bytes sent on the link including the additional bytes required by underlying protocols. This provides a transport independent mechanism for collection information on link utilization.
             cItpSpNotificationsEnable 1.3.6.1.4.1.9.9.232.1.5
                 cItpSpLsStateChangeNotifEnabled 1.3.6.1.4.1.9.9.232.1.5.1 truthvalue read-write
The SP linkset notification truth value. 'true' Indicates that cItpSpLinksetStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that cItpSpLinksetStateChange notification generation is disabled.
                 cItpSpLnkStateChangeNotifEnabled 1.3.6.1.4.1.9.9.232.1.5.2 truthvalue read-write
The SP link notification truth value. 'true' Indicates that cItpSpLinkStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that cItpSpLinkStateChange notification generation is disabled.
                 cItpSpCongestionNotifEnabled 1.3.6.1.4.1.9.9.232.1.5.3 truthvalue read-write
The SP Congestion notification truth value. 'true' Indicates that cItpSpCongestionChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that cItpSpCongestionChange notification generation is disabled.
                 cItpSpLinkUtilNotifEnabled 1.3.6.1.4.1.9.9.232.1.5.4 truthvalue read-write
The SP link utilization notification truth value. 'true' Indicates that the notification of link utilization has been enabled. That is, the notification generation is enabled. 'false' Indicates that the notification link utilization has been disabled.
         cItpSpMIBConformance 1.3.6.1.4.1.9.9.232.2
             cItpSpMIBCompliances 1.3.6.1.4.1.9.9.232.2.1
                 cItpSpMIBCompliance 1.3.6.1.4.1.9.9.232.2.1.1
The compliance statement for entities which implement the Cisco SP MIB
                 cItpSpMIBComplianceRev1 1.3.6.1.4.1.9.9.232.2.1.2
The compliance statement for entities which implement the Cisco SP MIB
                 cItpSpMIBComplianceRev2 1.3.6.1.4.1.9.9.232.2.1.3
The compliance statement for entities which implement the Cisco SP MIB
             cItpSpMIBGroups 1.3.6.1.4.1.9.9.232.2.2
                 cItpSpScalarsGroup 1.3.6.1.4.1.9.9.232.2.2.1
SP main objects.
                 cItpSpPointCodeGroup 1.3.6.1.4.1.9.9.232.2.2.2
SP main objects.
                 cItpSpLinksetGroup 1.3.6.1.4.1.9.9.232.2.2.3
SP linkset objects.
                 cItpSpLinkGroup 1.3.6.1.4.1.9.9.232.2.2.4
SP link objects.
                 cItpSpNotificationsEnableGroup 1.3.6.1.4.1.9.9.232.2.2.5
SP enable notification objects.
                 cItpSpNotificationsGroup 1.3.6.1.4.1.9.9.232.2.2.6
SP notification objects.
                 cItpSpStatsGroup 1.3.6.1.4.1.9.9.232.2.2.7
SP protocol statistics objects.
                 cItpSpScalarsGroupRev2 1.3.6.1.4.1.9.9.232.2.2.8
SP main objects.
                 cItpSpLinksetGroupRev2 1.3.6.1.4.1.9.9.232.2.2.9
SP linkset objects.
                 cItpSpLinkGroupRev2 1.3.6.1.4.1.9.9.232.2.2.10
SP link objects.
                 cItpSpNotificationsEnableGroupRev2 1.3.6.1.4.1.9.9.232.2.2.11
SP enable notification objects.
                 cItpSpNotificationsGroupRev2 1.3.6.1.4.1.9.9.232.2.2.12
SP notification objects.