CISCO-IPSLA-VIDEO-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-IPSLA-VIDEO-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, CISCO-RTTMON-MIB, CISCO-RTTMON-TC-MIB, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoIpslaVideoMIB 1.3.6.1.4.1.9.9.744
IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, network assessment and health monitoring. This MIB defines a collection of statistics resulting from the 'video' IP SLA operation. The Video Statistics table names are: cipslaLatestVideoStatsTable --- Contains only the latest statistics cipslaVideoAggStatsTable --- Contains aggregated statistics To create the Video operation, set rttMonEchoAdminProtocol (defined in CISCO-RTTMON-MIB) object to 'videoAppl'. Once the operation has been scheduled, both cipslaLatestVideoStatsTable and cipslaVideoAggStatsTable will be populated. Glossary: IP SLA - Cisco IOS IP Service Level Agreements IP SLA operation - Refers to the 'video' operation supported by IP SLA. RTT - Round Trip Time
         ciscoIpslaVideoMIBNotifs 1.3.6.1.4.1.9.9.744.0
         ciscoIpslaVideoMIBObjects 1.3.6.1.4.1.9.9.744.1
             cipslaVideoLatestOper 1.3.6.1.4.1.9.9.744.1.1
                 cipslaLatestVideoStatsTable 1.3.6.1.4.1.9.9.744.1.1.1 no-access
The 'video' operation sends out video streams at the frequency specified by rttMonCtrlAdminFrequency. This table contains the statistics calculated for the latest video packets. Each conceptual row in this table corresponds to an 'video' operation defined in rttMonCtrlAdminTable and has same index as rttMonCtrlAdminTable.
                     cipslaLatestVideoStatsEntry 1.3.6.1.4.1.9.9.744.1.1.1.1 no-access
A collection of objects that record the latest Video jitter operation. An entry is created only when the following objects are valid. - rttMonCtrlAdminRttType - rttMonEchoAdminProtocol The entry will start to collect data when rttMonCtrlAdminStatus is in 'active' state. The entry will be removed when the rttMonCtrlAdminStatus is changed to 'destroy' state.
                         cipslaLatestVideoMinPosSD 1.3.6.1.4.1.9.9.744.1.1.1.1.1 gauge32 read-only
The minimum of all positive jitter values for packets sent from source to destination.
                         cipslaLatestVideoMaxPosSD 1.3.6.1.4.1.9.9.744.1.1.1.1.2 gauge32 read-only
The maximum of all positive jitter values for packets sent from source to destination.
                         cipslaLatestVideoNumPosSD 1.3.6.1.4.1.9.9.744.1.1.1.1.3 gauge32 read-only
The number of all positive jitter values for packets sent from source to destination.
                         cipslaLatestVideoSumPosSD 1.3.6.1.4.1.9.9.744.1.1.1.1.4 gauge32 read-only
The sum of all positive jitter values for packets sent source to destination. The number of such values is stored in cipslaLatestVideoNumPosSD.
                         cipslaLatestVideoSum2PosSD 1.3.6.1.4.1.9.9.744.1.1.1.1.5 gauge32 read-only
The sum of square of all positive jitter values for packets sent from source to destination.
                         cipslaLatestVideoMinNegSD 1.3.6.1.4.1.9.9.744.1.1.1.1.6 gauge32 read-only
The minimum of absolute values of all negative jitter values for packets sent from source to destination.
                         cipslaLatestVideoMaxNegSD 1.3.6.1.4.1.9.9.744.1.1.1.1.7 gauge32 read-only
The maximum of absolute values of all negative jitter values for packets sent from source to destination.
                         cipslaLatestVideoNumNegSD 1.3.6.1.4.1.9.9.744.1.1.1.1.8 gauge32 read-only
The number of all negative jitter values for packets sent from source to destination.
                         cipslaLatestVideoSumNegSD 1.3.6.1.4.1.9.9.744.1.1.1.1.9 gauge32 read-only
The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in cipslaLatestVideoNumNegSD.
                         cipslaLatestVideoSum2NegSD 1.3.6.1.4.1.9.9.744.1.1.1.1.10 gauge32 read-only
The sum of square of all negative jitter values for packets sent from source to destination.
                         cipslaLatestVideoPktLossSD 1.3.6.1.4.1.9.9.744.1.1.1.1.11 gauge32 read-only
The number of packets lost when sent from source to destination.
                         cipslaLatestVideoPktOutSeq 1.3.6.1.4.1.9.9.744.1.1.1.1.12 gauge32 read-only
The number of packets arrived out of sequence.
                         cipslaLatestVideoSense 1.3.6.1.4.1.9.9.744.1.1.1.1.13 rttresponsesense read-only
An application specific sense code for the completion status.
                         cipslaLatestVideoOWSumSD 1.3.6.1.4.1.9.9.744.1.1.1.1.14 gauge32 read-only
The sum of one way trip time from source to destination.
                         cipslaLatestVideoOWSum2SD 1.3.6.1.4.1.9.9.744.1.1.1.1.15 gauge32 read-only
The sum of squares of one way trip time from source to destination.
                         cipslaLatestVideoOWMinSD 1.3.6.1.4.1.9.9.744.1.1.1.1.16 gauge32 read-only
The minimum of all one way trip time from source to destination.
                         cipslaLatestVideoOWMaxSD 1.3.6.1.4.1.9.9.744.1.1.1.1.17 gauge32 read-only
The maximum of all one way trip time from source to destination.
                         cipslaLatestVideoNumOWSD 1.3.6.1.4.1.9.9.744.1.1.1.1.18 gauge32 read-only
The number of successful one way trip time measurements from source to destination.
                         cipslaLatestVideoAvgJitterSD 1.3.6.1.4.1.9.9.744.1.1.1.1.19 gauge32 read-only
The average of positive and negative jitter values in Source-to-Destination direction.
                         cipslaLatestVideoIAJOut 1.3.6.1.4.1.9.9.744.1.1.1.1.20 gauge32 read-only
Inter-arrival jitter (RFC 1889) at responder.
                         cipslaLatestVideoErrSenseDescr 1.3.6.1.4.1.9.9.744.1.1.1.1.21 snmpadminstring read-only
An sense description for the completion status of the latest video operation.
                         cipslaLatestVideoUnSyncRTs 1.3.6.1.4.1.9.9.744.1.1.1.1.22 counter32 read-only
The number of RTT operations that have completed with sender and responder out of sync with NTP. The NTP sync means the total of NTP offset on sender and responder is within configured tolerance level
                         cipslaLatestVideoOWSumSDHigh 1.3.6.1.4.1.9.9.744.1.1.1.1.23 gauge32 read-only
The sum of one way latency from source to destination (high order 32 bits). The low order 32 bits are stored in cipslaLatestVideoOWSumSD.
                         cipslaLatestVideoOWSum2SDHigh 1.3.6.1.4.1.9.9.744.1.1.1.1.24 gauge32 read-only
The sum of squares of one way latency from source to destination (high order 32 bits). The low order 32 bits are stored in cipslaLatestVideoOWSum2SD.
                         cipslaLatestVideoNTPState 1.3.6.1.4.1.9.9.744.1.1.1.1.25 integer read-only
A value of sync(1) means sender and responder was in sync with NTP. The NTP sync means the total of NTP offset on sender and responder is within configured tolerance level. Enumeration: 'sync': 1, 'outOfSync': 2.
                         cipslaLatestVideoIPDVAvgSDJ 1.3.6.1.4.1.9.9.744.1.1.1.1.26 gauge32 read-only
Source to Destination IPDV average jitter according to RFC 5481.
                         cipslaLatestVideoOWAvgSD 1.3.6.1.4.1.9.9.744.1.1.1.1.27 gauge32 read-only
The average latency value from source to destination.
                         cipslaLatestVideoPktLateArrival 1.3.6.1.4.1.9.9.744.1.1.1.1.28 gauge32 read-only
The number of packets that arrived after the timeout.
             cipslaVideoStats 1.3.6.1.4.1.9.9.744.1.2
                 cipslaVideoAggStatsTable 1.3.6.1.4.1.9.9.744.1.2.1 no-access
The 'video' statistics table contains summarized information of the results for a conceptual control row. A rolling accumulated history of this information is maintained in a series of hourly 'group(s)'. When ipslaVideoAggStartTimeId groups exceeds the rttMonStatisticsAdminNumHourGroups value, the oldest corresponding hourly group will be deleted and will be replaced with the new ipslaVideoAggStatsStartTimeId hourly group.
                     cipslaVideoAggStatsEntry 1.3.6.1.4.1.9.9.744.1.2.1.1 no-access
This entry contains the objects which accumulate the results of a series of 'video' operations over a 60 minute time period or a time period stored in rttMonScheduleAdminRttLife, whichever is smaller. An entry is created only if when the following objects are valid. - rttMonCtrlAdminRttType - rttMonEchoAdminProtocol The entry will start to collect data when rttMonCtrlAdminStatus is in 'active' state. The entry will be removed when the rttMonCtrlAdminStatus is changed to 'destroy' state. cipslaVideoAggStartTimeId will be created at the beginning of the hour and will keep aggregating statistics until the end of the hour.
                         cipslaVideoAggStartTimeId 1.3.6.1.4.1.9.9.744.1.2.1.1.1 timestamp no-access
The value of sysUpTime at the time when this row was created.
                         cipslaVideoAggCompletions 1.3.6.1.4.1.9.9.744.1.2.1.1.2 counter32 read-only
The number of video operations that have completed successfully.
                         cipslaVideoAggOverThresholds 1.3.6.1.4.1.9.9.744.1.2.1.1.3 counter32 read-only
The number of video operations that violate jitterAvg threshold which is defined in RttMonReactVar.
                         cipslaVideoAggMinPosSD 1.3.6.1.4.1.9.9.744.1.2.1.1.4 gauge32 read-only
The minimum of absolute values of all positive jitter values for packets sent from source to destination.
                         cipslaVideoAggMaxPosSD 1.3.6.1.4.1.9.9.744.1.2.1.1.5 gauge32 read-only
The maximum of absolute values of all positive jitter values for packets sent from source to destination.
                         cipslaVideoAggNumPosSD 1.3.6.1.4.1.9.9.744.1.2.1.1.6 counter32 read-only
The number of all positive jitter values for packets sent from source to destination.
                         cipslaVideoAggSumPosSD 1.3.6.1.4.1.9.9.744.1.2.1.1.7 counter32 read-only
The sum of all positive jitter values for packets sent from source to destination. The number of such values is stored in ipslaVideoAggNumPosSDs.
                         cipslaVideoAggSum2PosSDLow 1.3.6.1.4.1.9.9.744.1.2.1.1.8 counter32 read-only
The sum of square of all positive jitter values for packets sent from source to destination (low order 32 bits).
                         cipslaVideoAggSum2PosSDHigh 1.3.6.1.4.1.9.9.744.1.2.1.1.9 counter32 read-only
The sum of square of all positive jitter values for packets sent from source to destination (high order 32 bits).
                         cipslaVideoAggMinNegSD 1.3.6.1.4.1.9.9.744.1.2.1.1.10 gauge32 read-only
The minimum of all negative jitter values for packets sent from source to destination.
                         cipslaVideoAggMaxNegSD 1.3.6.1.4.1.9.9.744.1.2.1.1.11 gauge32 read-only
The maximum of all negative jitter values for packets sent from source to destination.
                         cipslaVideoAggNumNegSD 1.3.6.1.4.1.9.9.744.1.2.1.1.12 counter32 read-only
The number of all negative jitter values for packets sent from source to destination.
                         cipslaVideoAggSumNegSD 1.3.6.1.4.1.9.9.744.1.2.1.1.13 counter32 read-only
The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in ipslaVideoAggNumNegSDs.
                         cipslaVideoAggSum2NegSDLow 1.3.6.1.4.1.9.9.744.1.2.1.1.14 counter32 read-only
The sum of square of all negative jitter values for packets sent from source to destination (low order 32 bits).
                         cipslaVideoAggSum2NegSDHigh 1.3.6.1.4.1.9.9.744.1.2.1.1.15 counter32 read-only
The sum of square of all negative jitter values for packets sent from source to destination (high order 32 bits).
                         cipslaVideoAggPktLossSD 1.3.6.1.4.1.9.9.744.1.2.1.1.16 counter32 read-only
The number of lost packets when sent from source to destination.
                         cipslaVideoAggPktOutSeq 1.3.6.1.4.1.9.9.744.1.2.1.1.17 counter32 read-only
The number of packets arrived out of sequence.
                         cipslaVideoAggPktSkipped 1.3.6.1.4.1.9.9.744.1.2.1.1.18 counter32 read-only
The number of packets that are skipped per operation because the router could not send the packet out.
                         cipslaVideoAggErrors 1.3.6.1.4.1.9.9.744.1.2.1.1.19 counter32 read-only
The number of occasions when a video operation could not be initiated because of an internal error.
                         cipslaVideoAggBusies 1.3.6.1.4.1.9.9.744.1.2.1.1.20 counter32 read-only
The number of occasions when a video operation could not be initiated because a previous video operation has not been completed.
                         cipslaVideoAggOWSumSD 1.3.6.1.4.1.9.9.744.1.2.1.1.21 counter32 read-only
The sum of one way trip time from source to destination.
                         cipslaVideoAggOWSum2SDLow 1.3.6.1.4.1.9.9.744.1.2.1.1.22 counter32 read-only
The sum of squares of one way trip time from source to destination (low order 32 bits).
                         cipslaVideoAggOWSum2SDHigh 1.3.6.1.4.1.9.9.744.1.2.1.1.23 counter32 read-only
The sum of squares of one way trip time from source to destination (high order 32 bits).
                         cipslaVideoAggOWMinSD 1.3.6.1.4.1.9.9.744.1.2.1.1.24 gauge32 read-only
The minimum of all one way trip time from source to destination.
                         cipslaVideoAggOWMaxSD 1.3.6.1.4.1.9.9.744.1.2.1.1.25 gauge32 read-only
The maximum of all one way trip time from source to destination.
                         cipslaVideoAggNumOWSD 1.3.6.1.4.1.9.9.744.1.2.1.1.26 counter32 read-only
The number of one way trip time that are successfully measured from source to destination.
                         cipslaVideoAggAvgJSD 1.3.6.1.4.1.9.9.744.1.2.1.1.27 gauge32 read-only
The average of positive and negative jitter values in source-to-destination direction.
                         cipslaVideoAggIAJOut 1.3.6.1.4.1.9.9.744.1.2.1.1.28 gauge32 read-only
Inter-arrival jitter (RFC 1889) at responder
                         cipslaVideoAggIAJIn 1.3.6.1.4.1.9.9.744.1.2.1.1.29 gauge32 read-only
Inter-arrival jitter (RFC 1889) at sender
                         cipslaVideoAggPktLateArrival 1.3.6.1.4.1.9.9.744.1.2.1.1.30 counter32 read-only
The number of packets that arrived after the timeout.
                         cipslaVideoAggUnSyncRTs 1.3.6.1.4.1.9.9.744.1.2.1.1.31 counter32 read-only
The number of RTT operations that have completed with sender and responder out of sync with NTP. The NTP sync means the total of NTP offset on sender and responder is within configured tolerance level
                         cipslaVideoAggOWSumSDHigh 1.3.6.1.4.1.9.9.744.1.2.1.1.32 counter32 read-only
The sum of one way times from source to destination (high order 32 bits). The low order 32 bits are stored in cipslaVideoAggOWSumSD.
         ciscoIpslaVideoMIBConform 1.3.6.1.4.1.9.9.744.2
             ciscoIpslaVideoMIBCompliances 1.3.6.1.4.1.9.9.744.2.1
                 ciscoIpslaVideoMIBCompliance 1.3.6.1.4.1.9.9.744.2.1.1
This is a default module-compliance containing default object groups.
             ciscoIpslaVideoMIBGroups 1.3.6.1.4.1.9.9.744.2.2
                 ciscoIpslaVideoStatsGroup 1.3.6.1.4.1.9.9.744.2.2.1
A collection of statistics objects related to Video Probe.