CISCO-IGMP-FILTER-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-IGMP-FILTER-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoIGMPFilterMIB 1.3.6.1.4.1.9.9.238
IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Multicast groups identified in this MIB and only allow certain ports to join certain multicast groups.
         ciscoIgmpFilterMIBObjects 1.3.6.1.4.1.9.9.238.1
             cIgmpFilterGeneral 1.3.6.1.4.1.9.9.238.1.1
                 cIgmpFilterEnable 1.3.6.1.4.1.9.9.238.1.1.1 truthvalue read-write
This object controls whether the IGMP filtering is enabled on the device. A false(2) value will prevent the IGMP filtering action on the device.
                 cIgmpFilterMaxProfiles 1.3.6.1.4.1.9.9.238.1.1.2 unsigned32 read-only
Indicates the maximum number of profiles supported by this device. A value of zero indicates no limitation on the number of profiles.
             cIgmpFilterInfo 1.3.6.1.4.1.9.9.238.1.2
                 cIgmpFilterTable 1.3.6.1.4.1.9.9.238.1.2.1 no-access
This table contains entries that identify lists of IP Multicast groups for each profile configured on the device. Each entry contains a range of contiguous IP Multicast groups associated to a profile index. Multiple cIgmpFilterEntry may be associated with the same cIgmpFilterProfileIndex. All the cIgmpFilterEntry with the same profile index are subjected to the same IGMP filtering action as defined in cIgmpFilterProfileAction. Each profile index may be associated with zero or more interfaces through cIgmpFilterInterfaceIfIndex object in cIgmpFilterInterfaceTable. The maximum number of entries is determined by cIgmpFilterMaxProfiles.
                     cIgmpFilterEntry 1.3.6.1.4.1.9.9.238.1.2.1.1 no-access
An entry (conceptual row) in the cIgmpFilterTable. The creation, deletion or modification of an entry is controlled through the MIB objects defined under cIgmpFilterEditor group.
                         cIgmpFilterProfileIndex 1.3.6.1.4.1.9.9.238.1.2.1.1.1 unsigned32 no-access
Index identifying this entry.
                         cIgmpFilterStartAddressType 1.3.6.1.4.1.9.9.238.1.2.1.1.2 inetaddresstype no-access
This object describes the type of Internet address used to determine the start address of IP multicast group for a profile.
                         cIgmpFilterStartAddress 1.3.6.1.4.1.9.9.238.1.2.1.1.3 inetaddress no-access
This object describes the start of the IP multicast group address of a contiguous range which will be subjected to filtering operation.
                         cIgmpFilterEndAddressType 1.3.6.1.4.1.9.9.238.1.2.1.1.4 inetaddresstype read-only
This object indicates the type of Internet address used to determine the end address of IP multicast group for a profile.
                         cIgmpFilterEndAddress 1.3.6.1.4.1.9.9.238.1.2.1.1.5 inetaddress read-only
This object indicates the end of the IP multicast group address of a contiguous range which will be subjected to filtering operation.
                         cIgmpFilterProfileAction 1.3.6.1.4.1.9.9.238.1.2.1.1.6 integer read-only
This object defines the action for filtering IGMP reports for this profile. If the object is set to deny(2): then all IGMP reports associated to IP multicast groups included in the profile identified by cIgmpFilterInterfaceProfileIndex will be dropped. If the object is set to permit(1): then all IGMP reports associated to IP multicast groups not included in the profile identified by cIgmpFilterInterfaceProfileIndex will be dropped. Enumeration: 'deny': 2, 'permit': 1.
                 cIgmpFilterInterfaceTable 1.3.6.1.4.1.9.9.238.1.2.2 no-access
This table contains the list of interfaces that can support IGMP filter feature.
                     cIgmpFilterInterfaceEntry 1.3.6.1.4.1.9.9.238.1.2.2.1 no-access
Each entry contains the configuration for associating the IGMP filter profile index with the interface. An entry is created for each of the IGMP filter capable interface on the system. The entry is removed on removal of corresponding interface from system.
                         cIgmpFilterInterfaceProfileIndex 1.3.6.1.4.1.9.9.238.1.2.2.1.1 unsigned32 read-write
Specifies which IGMP filter profile applies to this interface. If the value of this MIB object matches the value of cIgmpFilterProfileIndex in cIgmpFilterTable, the corresponding profile configuration will apply to this interface. Agent returns inconsistentValue if this profile does not exist in cIgmpFilterTable. A value of zero indicates no profile is associated with corresponding interface. The filtering action on each interface is also defined by the associated profile.
             cIgmpFilterEditor 1.3.6.1.4.1.9.9.238.1.3
                 cIgmpFilterEditSpinLock 1.3.6.1.4.1.9.9.238.1.3.1 testandincr read-write
This object is used to facilitate modification of IGMP Filter Editor Group in the CISCO-IGMP-FILTER-MIB module by multiple managers. In particular, it is useful when modifying the value of the cIgmpFilterEditor object. The procedure for modifying the cIgmpFilterEditor object is as follows: 1. Retrieve the value of cIgmpFilterEditSpinLock and of object within cIgmpFilterEditor group. 2. Generate new values for 'writeable' objects in the cIgmpFilterEditor group except for cIgmpFilterEditSpinLock object. 3. Set the value of cIgmpFilterEditSpinLock to the retrieved value, and the value of objects in cIgmpFilterEditor to the new value. If the set fails for the cIgmpFilterEditSpinLock object, go back to step 1. The cIgmpFilterApplyStatus and cIgmpFilterEditSpinLock should be read together by NMS to make sure that the result is associated with its configuration request. To add/delete or modify a profile ( through cIgmpFilterEditor objects ) following procedure may be followed as an example.: 1. GET(cIgmpFilterEditSpinLock.0) and save in sValue. 2. SET(cIgmpFilterEditSpinLock.0 = sValue, cIgmpFilterEditProfileIndex.0 = validProfileNumber, cIgmpFilterEditStartAddress.0 = validStartAddress, cIgmpFilterEditEndAddress.0 = validEndAddress, cIgmpFilterEditOperation.0 = validOperation) 3. If the SET in step 2 is not successful go back to step 1. 4. If the SET in step 2 is successful, user should GET(cIgmpFilterEditSpinLock.0) and GET(cIgmpFilterApplyStatus.0) simultaneously. 5. The cIgmpFilterApplyStatus.0 reflects the outcome of step 2 only if cIgmpFilterEditSpinLock.0 = sValue + 1 or cIgmpFilterEditSpinLock.0 = 0 if sValue reaches value at which cIgmpFilterEditSpinLock wraps around.
                 cIgmpFilterEditProfileIndex 1.3.6.1.4.1.9.9.238.1.3.2 unsigned32 read-write
Buffer object to edit corresponding object cIgmpFilterProfileIndex in cIgmpFilterTable. Maximum value this object can be set to is determined by cIgmpFilterMaxProfiles object.
                 cIgmpFilterEditStartAddressType 1.3.6.1.4.1.9.9.238.1.3.3 inetaddresstype read-write
Buffer object to edit corresponding object cIgmpFilterStartAddressType in cIgmpFilterTable. This object describes the type of Internet address used to determine the start address of IP multicast group for a profile.
                 cIgmpFilterEditStartAddress 1.3.6.1.4.1.9.9.238.1.3.4 inetaddress read-write
Buffer object to edit corresponding object cIgmpFilterStartAddress in cIgmpFilterTable to establish start address of filtering range for a profile.
                 cIgmpFilterEditEndAddressType 1.3.6.1.4.1.9.9.238.1.3.5 inetaddresstype read-write
Buffer object to edit corresponding object cIgmpFilterEndAddressType in cIgmpFilterTable. This object describes the type of Internet address used to determine the start address of IP multicast group for a profile.
                 cIgmpFilterEditEndAddress 1.3.6.1.4.1.9.9.238.1.3.6 inetaddress read-write
Buffer object to edit corresponding object cIgmpFilterEndAddress in cIgmpFilterTable to establish end address of filtering range for a profile.
                 cIgmpFilterEditProfileAction 1.3.6.1.4.1.9.9.238.1.3.7 integer read-write
Buffer object to edit corresponding object in cIgmpFilterTable to determine filtering action of each profile. Enumeration: 'deny': 2, 'permit': 1.
                 cIgmpFilterEditOperation 1.3.6.1.4.1.9.9.238.1.3.8 integer read-write
The function of this object is to allow user to apply the changes in cIgmpFilterEditor objects to cIgmpFilterTable. This object always has the value 'none' when read. When written each value causes the appropriate action: 'add' - tries to insert the information contained in cIgmpFilterEditor objects into cIgmpFilterTable. If the entry already exists in the table the 'add' fails. 'delete' - tries to delete corresponding entry from cIgmpFilterTable. If a user completely deletes a profile that has corresponding entries in the cIgmpFilterInterfaceTable, then all the interfaces mapped to corresponding profile will be cleared and set to zero. 'modify' - Mode of operation used to edit an entry in cIgmpFilterTable. If the corresponding entry does not exist, modify operation fails. This mode allows user to extend/truncate a contiguous filtered range, type of Internet addressing and filtering action for a profile. 'none' - no operation is performed. Enumeration: 'none': 1, 'modify': 4, 'add': 2, 'delete': 3.
                 cIgmpFilterApplyStatus 1.3.6.1.4.1.9.9.238.1.3.9 integer read-only
The current status of an 'add', 'delete' or 'modify' operation. If no apply is currently active, the status represented is that of the most recently completed 'add', 'delete' or 'modify' operation. The value of this objects indicates succeeded(2) state initially when no 'add', 'delete', 'modify' operation has been carried out. The possible values are: someOtherError - the 'add', 'delete' or 'modify' failed due to undefined error(s) in apply operation. (e.g., insufficient memory). succeeded - the 'add', 'delete' or 'modify' operation was successful. (This value is also used when no apply has been invoked since the last time the local system restarted.) inconsistentEdit - the 'add', 'delete' or 'modify' failed due to inconsistency of the data. entryPresentError - the 'add' operation failed as the corresponding entry already exists in cIgmpFilterTable. entryNotPresentError - the 'modify' operation failed as no corresponding entry exists in cIgmpFilterTable. Enumeration: 'someOtherError': 1, 'entryNotPresentError': 5, 'entryPresentError': 4, 'inconsistentEdit': 3, 'succeeded': 2.
         ciscoIgmpFilterMIBConformance 1.3.6.1.4.1.9.9.238.2
             ciscoIgmpFilterMIBCompliances 1.3.6.1.4.1.9.9.238.2.1
                 ciscoIgmpFilterGolbalMIBCompliance 1.3.6.1.4.1.9.9.238.2.1.1
The compliance statement for entities providing global control of action and implementing IGMP Filter MIB. OBJECT cIgmpFilterEditStartAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEditStartAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEditEndAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEditEndAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterStartAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterStartAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEndAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEndAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION An implementation is only required to support IPv4 addresses.
                 ciscoIgmpFilterGlobalMIBComplianceRev1 1.3.6.1.4.1.9.9.238.2.1.2
The compliance statement for entities providing global control of action and implementing IGMP Filter MIB. OBJECT cIgmpFilterEditStartAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEditStartAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEditEndAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEditEndAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterStartAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterStartAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEndAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION An implementation is only required to support IPv4 addresses. OBJECT cIgmpFilterEndAddress SYNTAX InetAddress (SIZE(4)) DESCRIPTION An implementation is only required to support IPv4 addresses.
             ciscoIgmpFilterMIBGroups 1.3.6.1.4.1.9.9.238.2.2
                 ciscoIgmpFilterGlobalGroup 1.3.6.1.4.1.9.9.238.2.2.1
A collection of objects providing the configuration of IGMP filter for the system.
                 ciscoIgmpFilterInfoGroup 1.3.6.1.4.1.9.9.238.2.2.2
A collection of objects providing the configuration of IGMP filter for the system.
                 ciscoIgmpFilterEditorGroup 1.3.6.1.4.1.9.9.238.2.2.3
A collection of objects acting as a buffer to add/delete/modify the entries in read-only table cIgmpFilterTable.