CISCO-GGSN-GEO-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-GGSN-GEO-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cggsnGeoMIB 1.3.6.1.4.1.9.9.724
This MIB provide additional information for passive interface configured for each OSPF process, independent of object creation in the corresponding OSPF MIB.
         cggsnGeoPassiveTable 1.3.6.1.4.1.9.9.724.1 no-access
This table contains information about passive interfaces configured in each OSPF process. Further this table provides information about passive interfaces either enabled(active) or in standby mode.
             cggsnGeoPassiveEntry 1.3.6.1.4.1.9.9.724.1.1 no-access
An entry is created or removed whenever a interface related configuation operation is performed under the OSPF process. For Example : Ethernet1/0 interface has ifIndex value as 5. The ifIndex of 5 is a passive interface of particular OSPF process which copies the name of the particular interface to this object . Based on this example Ethernet1/0 is going copy to the object. Otherwise ifIndex is not a passive interface this object content will be NULL.
                 cggsnGeoProcessNumber 1.3.6.1.4.1.9.9.724.1.1.1 unsigned32 no-access
Specifies the process identifier for each OSPF configured interface
                 cggsnGeoPassiveStdbyIfName 1.3.6.1.4.1.9.9.724.1.1.2 snmpadminstring read-only
This variable specfies name of the passive interface configured
                 cggsnGeoPassiveIfOnStdby 1.3.6.1.4.1.9.9.724.1.1.3 truthvalue read-only
This object indicates whether the passive interface is configured in standby mode or not. The value of this object 'true' indicates, the standby mode is configured, otherwise the standby mode is not configured.
                 cggsnGeoVRFEnabled 1.3.6.1.4.1.9.9.724.1.1.4 truthvalue read-only
This object indicates whether the Current OSPF process is bonded with VRF name of the router or not. The value of this object 'true' indicates OSPF process is bonded with VRF name of the router, otherwise the OSPF process is not bonded with VRF name of router.
                 cggsnGeoRowStatus 1.3.6.1.4.1.9.9.724.1.1.5 rowstatus read-only
This object is used to manage creation and deletion of rows in this table. Objects in this row cannot be modified when this entry is 'active'.
         cggsnGeoConformance 1.3.6.1.4.1.9.9.724.2
             cggsnGeogroups 1.3.6.1.4.1.9.9.724.2.1
                 cggsnGeoPassiveGroup 1.3.6.1.4.1.9.9.724.2.1.1
These objects are used to provide information about passive standby interface configuration in OSPF interface
             cggsnGeoCompliances 1.3.6.1.4.1.9.9.724.2.2
                 cggsnGeoCompliance 1.3.6.1.4.1.9.9.724.2.2.1
The Compilance Stament for the agent they support CISCO-GGSN-GEO-MIB