CISCO-DMN-DSG-TUNING-MIB: View SNMP OID List / Download MIB

VENDOR: SCIENTIFIC-ATLANTA


 Home MIB: CISCO-DMN-DSG-TUNING-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, CISCO-DMN-DSG-ROOT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoDSGTuning 1.3.6.1.4.1.1429.2.2.5.5
Cisco DSG Tuning MIB.
     activeTuning 1.3.6.1.4.1.1429.2.2.5.5.1
         activeTuningInput 1.3.6.1.4.1.1429.2.2.5.5.1.1 integer read-write
Select Input for tuning. Enumeration: 'rf3': 4, 'rf2': 3, 'rf1': 2, 'rf4': 5, 'ipi': 6, 'none': 255, 'asi': 1.
         activeTuningValidateOrbPos 1.3.6.1.4.1.1429.2.2.5.5.1.2 integer read-write
Command used to validate orbital position. Set this object to yes( 2 ) to validate Orbital position. Enumeration: 'writeOnly': 1, 'yes': 2.
         activeTuningChScan 1.3.6.1.4.1.1429.2.2.5.5.1.3 integer read-write
Channel Scan command. Setting scan( 1 ) triggers the channel scanning process. Enumeration: 'writeOnly': 2, 'scan': 1.
     activeTuningTable 1.3.6.1.4.1.1429.2.2.5.5.2
         activeTunerTable 1.3.6.1.4.1.1429.2.2.5.5.2.1 no-access
Active Tuner Table.
             activeTunerEntry 1.3.6.1.4.1.1429.2.2.5.5.2.1.1 no-access
Entry for Active Tuner Table.
                 activeTunerIndex 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.1 integer32 no-access
Active Tuner Index.
                 activeTunerRFInput 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.2 integer read-write
Active Tuner RF Input. Enumeration: 'rf3': 4, 'rf2': 3, 'rf1': 2, 'none': 255, 'rf4': 5.
                 activeTunerFreq 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.3 integer32 read-write
The Satellite Downlink frequency in the range of 0 to 15000000 KHz in steps of 1 KHz.
                 activeTunerSymbolRate 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.4 integer32 read-write
Data rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 10^2 ).
                 activeTunerDVBSFEC 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.5 integer read-write
Forward Error Correction Rate. For DVB-S2 modulation only auto is applicable. For DVB-S modulation all options are applicable. Enumeration: 'twoThirds': 3, 'threeQuarters': 4, 'oneHalf': 1, 'auto': 10, 'fiveSixths': 6, 'sevenEigths': 7.
                 activeTunerModulation 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.6 integer read-write
Signal Modulation type. Enumeration: 'dvbs2': 2, 'dvbs': 1.
                 activeTunerRollOff 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.7 integer read-write
Alpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100. Enumeration: 'f20': 3, 'f35': 1, 'f25': 2.
                 activeTunerIQ 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.8 integer read-write
Spectrum Inversion. Enumeration: 'auto': 3, 'nonInverted': 2, 'inverted': 1.
         activeInputTable 1.3.6.1.4.1.1429.2.2.5.5.2.2 no-access
Active Input Table.
             activeInputEntry 1.3.6.1.4.1.1429.2.2.5.5.2.2.1 no-access
Entry for Active Input Table.
                 activeInputRFIndex 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1 integer no-access
Selection of RF Input. Enumeration: 'rf3': 3, 'rf2': 2, 'rf1': 1, 'rf4': 4.
                 activeInputLNBType 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2 integer read-write
LNB Type: C-Band/Single Ku/Dual Ku/Advanced. For simplified setup select C-Band or Ku-Band. If there is a need to configure LO, select Advanced. Enumeration: 'singleKuBand': 2, 'cBand': 1, 'dualKuBand': 3, 'advanced': 4.
                 activeInputLNBTrim 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3 integer32 read-write
Low Noise Block Trim Level 1 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
                 activeInputLNBTrim2 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4 integer32 read-write
Low Noise Block Trim Level 2 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
                 activeInputLocalOscFreq1 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5 integer32 read-write
RW, only when LNB Type is Advanced. Local Oscillator #1 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
                 activeInputLocalOscFreq2 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6 integer32 read-write
RW, only when LNB Type is Advanced. Local Oscillator #2 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
                 activeInputCrossOver 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7 integer32 read-write
Crossover Frequency for Local Oscillator. It has a range of 0 to 15000000 KHz in steps of 1KHz.
                 activeInputLocalOscControl 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8 integer read-write
22KHz Local Osillator Control. Enumeration: 'on': 2, 'off': 1, 'auto': 3.
                 activeInputOrbitalPos 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9 integer32 read-write
Orbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1/10th of a degree.
                 activeInputEastWestFlag 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10 integer read-write
RF Mapping Location East/West Flag. Enumeration: 'west': 2, 'east': 1, 'notApplicable': 3.
                 activeInputPolarization 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11 integer read-write
RF Mapping Polarization. Enumeration: 'horizontal': 1, 'automatic': 3, 'vertical': 2.
                 activeInputSatName 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12 displaystring read-only
Satellite Name Matching the Orbital Position + E/W Flag. Enter Satellite/Transponder Name to fill in Azimuth and E/W Flag automatically.
                 activeInputLastLNBConfig 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13 integer32 read-write
LNB configuration last applied.
                 activeInputDiSeqCEnable 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14 integer read-write
DiSeqC On/Off. Enumeration: 'enable': 2, 'disable': 1.
                 activeInputDiSeqCSwitch 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15 integer read-write
DiSeqC switch selection. Enumeration: 'a': 2, 'c': 4, 'b': 3, 'e': 6, 'd': 5, 'g': 8, 'f': 7, 'i': 10, 'h': 9, 'k': 12, 'j': 11, 'm': 14, 'l': 13, 'o': 16, 'n': 15, 'p': 17, 'off': 1.
         lnbPowerTable 1.3.6.1.4.1.1429.2.2.5.5.2.3 no-access
LNB power Table.
             lnbPowerEntry 1.3.6.1.4.1.1429.2.2.5.5.2.3.1 no-access
Entry for LNB power Table.
                 lnbPowerIndex 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.1 integer32 no-access
Low Noise Block Power Index.
                 lnbPowerInput 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.2 integer read-write
Low Noise Block Power Input. Enumeration: 'rf3': 4, 'rf2': 3, 'rf1': 2, 'none': 255, 'rf4': 5.
                 lnbPowerControl 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.3 integer read-write
Active LNB Power setting.13/18V is to control dual polarity LNB. The convention is: Horizontal-18V; Vertical-13V. Valid settings are, Off 13V ( 13V always, ignore polarity in NIT ) 18V ( 18V always, ignore polarity in NIT ) 13V-NIT ( 13V initially, over-ride by polarity in NIT ) 18V-NIT ( 18V initially, over-ride by polarity in NIT ). Enumeration: 'thirteenV': 2, 'eighteenH': 3, 'vNIT': 5, 'off': 1, 'hNIT': 4.
                 lnbPowerStatus 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.4 integer read-only
Low Noise Block Power Supply Status. Enumeration: 'normal': 2, 'overLoad': 5, 'overTemperature': 4, 'disabled': 7, 'notApplicable': 1, 'shortCircuit': 6, 'noLoad': 3.
     tuningStatusTable 1.3.6.1.4.1.1429.2.2.5.5.3
         satSignalTable 1.3.6.1.4.1.1429.2.2.5.5.3.1 no-access
Satellite Signal Table.
             satSignalEntry 1.3.6.1.4.1.1429.2.2.5.5.3.1.1 no-access
Entry for Satellite Signal Table.
                 satSignalIndex 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.1 integer32 no-access
Satellite Signal Table Index.
                 satSignalPvBer 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.2 displaystring read-only
Status: DVB-S Post-Viterbi Bit Error Rate.
                 satSignalQPSKBer 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.3 displaystring read-only
Status: Quadrature phase-shift keying ( QPSK ) Bit error rate.
                 satSignalLdpCber 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.4 displaystring read-only
Status: DVB-S2 Low Density Parity Check Bit Error Rate.
                 satSignalCndisp 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.5 displaystring read-only
Status: Carrier to Noise Ratio.
                 satSignalCnMargin 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.6 displaystring read-only
Status: Carrier to Noise Ratio Link Margin.
                 satSignalLevel 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.7 displaystring read-only
Status: Signal Level.
                 satSignalSatDishCnMargin 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.8 displaystring read-only
Status: SatDish CN Margin in dB Displays the margin in dB to a threshold level at which failure occurs. The range is 0dB to 10dB.
                 satSignalSatDishSigLevel 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.9 displaystring read-only
Status: SatDish Signal level( in dBm ) plus some kind of graphical signal level meter on the LCD (the range is -75 dBm to +-20 dBm).
                 satSignalPerDisp 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.10 displaystring read-only
Status: DVB-S2 Packet Error Rate.
                 satSignalAfc 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.11 displaystring read-only
Status: Tuner Frequency Offset. The range is from -51.0 to 51.0 in steps of 0.1 MHz.
                 satSignalUncorErrCnt 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.12 displaystring read-only
Status: Uncorrected Error Counter. The range is from 0 to 4294967295.
                 satSignalCorErrCnt 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.13 displaystring read-only
Status: DVB-S Reed-Solomon Corrected Error Counter.
                 satSignalRfLock 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14 integer read-only
Status: RF Lock Status. Enumeration: 'lock': 2, 'noLock': 1.
                 satSignalDnLkFreq 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.15 displaystring read-only
Status: Downlink Frequency in the range of 0.000000 to 15.000000 GHz in steps of 0.000001 GHz.
                 satSignalLbandFreq 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.16 displaystring read-only
Status: L-Band Frequency in the range of 950.000 to 2150.000 MHz in steps of 0.001 MHz.
                 satSignalSymbolRate 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.17 displaystring read-only
Status: Symbol Rate in the Range of 1.0000 to 45.0000 MegaSym/second in steps of 0.0001 MegaSym/second.
                 satSignalFecRate 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.18 integer read-only
Status: Forward Error Correction Rate. Enumeration: 'nineTenth': 10, 'twoThird': 4, 'fourFifth': 6, 'auto': 11, 'half': 2, 'notApplicable': 1, 'fiveSixth': 7, 'threeQuater': 5, 'threeFifth': 3, 'sevenEight': 8, 'eightNinth': 9.
                 satSignalPolarization 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.19 integer read-only
Status: Signal Polarization. Enumeration: 'leftCircular': 3, 'rightCircular': 4, 'horizontal': 1, 'vertical': 2, 'auto': 5.
                 satSignalModulation 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.20 integer read-only
Status: Signal Modulation Type. Enumeration: 'notApplicable': 1, 'sixteenQamDvbs2': 5, 'eightPskDvbs2': 4, 'qpskDvbs': 2, 'qpskDvbs2': 3.
                 satSignalIQ 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.21 integer read-only
Status: Spectrum Inversion. Enumeration: 'auto': 3, 'notApplicable': 4, 'nonlnverted': 2, 'inverted': 1.
                 satSignalLnbPsStatus 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.22 integer read-only
Status: Low Noise Block Power Supply Status. Enumeration: 'normal': 2, 'overLoad': 5, 'overTemperature': 4, 'disabled': 7, 'notApplicable': 1, 'shortCircuit': 6, 'noLoad': 3.
                 satSignalPilots 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.23 integer read-only
Status: Presence of Pilot Symbols. Enumeration: 'notApplicable': 3, 'yes': 2, 'no': 1.
                 satSignalLoSelect 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.24 integer read-only
Status: LO Select. Enumeration: 'on': 2, 'off': 1, 'auto': 3.
                 satSignalPolar 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.25 integer read-only
Status: Polarization. Enumeration: 'leftCircular': 3, 'rightCircular': 4, 'horizontal': 1, 'vertical': 2, 'auto': 5.
                 satSignalClearSigErrCnt 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.26 integer read-write
Set this variable to yes( 2 ) to clear signal error counter. Enumeration: 'writeOnly': 1, 'yes': 2.
                 satSignalValidateOrbPosDate 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.27 displaystring read-only
Status: Last Orbital Position Validate Date.
                 satSignalValidateOrbPosStat 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.28 displaystring read-only
Status: Orbital Position Validation Status.
                 satSignalChScanStatus 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.29 integer read-only
Channel Scanning Status :Off/Scanning/Done. Enumeration: 'scanning': 2, 'off': 1, 'done': 3.
                 satSignalSigLevelRaw 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.30 displaystring read-only
Signal Level - RAW Register Value.
                 satSignalP1DStatus 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.31 displaystring read-only
P1 DSTATUS.
                 satSignalDvbS2FrameLen 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.32 integer read-only
DVB-S2 Frame Length. Enumeration: 'notApplicable': 3, 'shortFrame': 1, 'longFrame': 2.
                 satSignalCnMarginRaw 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.33 displaystring read-only
C/N Margin - RAW Register Value.
                 satSignalDvbSQpskErrCount 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.34 displaystring read-only
DVB-S QPSK Error Count.
                 satSignalDvbS2LdpcErrCount 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.35 displaystring read-only
DVB-S2 LPDC Error Count.
                 satSignalPvErrCount 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.36 displaystring read-only
DVB-S PV Error Count.
                 satSignalFecSyncStatus 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.37 integer read-only
FEC SYNC Status for DVB-S PV Decoder. Enumeration: 'yes': 2, 'no': 1.
                 satSignalPktErrCount 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.38 displaystring read-only
DVB-S/DVB-S2 Packet Error Count.
         inputStatusTable 1.3.6.1.4.1.1429.2.2.5.5.3.2 no-access
Input Status Table.
             inputStatusEntry 1.3.6.1.4.1.1429.2.2.5.5.3.2.1 no-access
Entry for Input Status Table.
                 inputStatusIndex 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.1 integer32 no-access
Status: Index for inputStatus Table.
                 inputStatusCurInput 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.2 integer read-only
Status: Current Input for D9865 only. Enumeration: 'rf': 1.
                 inputStatusSatLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.3 integer read-only
Status: Satellite Lock: No Lock/Lock+Sig/Lock-Sig. Enumeration: 'lockminussignal': 2, 'nolock': 1, 'lockplussignal': 3.
                 inputStatusMpgIpLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.4 integer read-only
Signal Validity.MPEG over IP Lock. Enumeration: 'lock': 2, 'nolock': 1.
                 inputStatusInputRate 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.5 displaystring read-only
Status: Input Rate in Mega bauds per second ( Mbps ). The range is from 0.000000 to 4294.967295 Mbps in steps of 0.000001 Mbps.
                 inputStatusNetworkName 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.6 displaystring read-only
Status: Network Name.
                 inputStatusNetworkId 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.7 displaystring read-only
Status: Network ID.
                 inputStatusTransportId 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.8 displaystring read-only
Status: Transport ID.
                 inputStatusScramblingMode 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.9 integer read-only
Status: Scrambling mode. Enumeration: 'unknown': 1, 'des': 2, 'biss2': 5, 'biss3': 6, 'biss1': 4, 'dvb': 3.
                 inputStatusTransportError 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.10 integer read-only
Status: Transport Error. Enumeration: 'notApplicable': 1, 'ok': 2, 'error': 3.
                 inputStatusAsiLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.11 integer read-only
Status: ASI Lock. Enumeration: 'lock': 2, 'nolock': 1.
                 inputStatusAsiLinkError 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.12 integer read-only
Status: ASI Link Error. Enumeration: 'notApplicable': 1, 'ok': 2, 'error': 3.
                 inputStatusAsiPacketSize 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.13 integer read-only
Status: ASI Packet Size. Enumeration: 'notApplicable': 1, 'twoHundredAndFour': 3, 'oneHundredAndEightyEight': 2.
                 inputStatusLastTuneReason 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.14 displaystring read-only
Status: Reason for the last tune.
                 inputStatusCurD985xInput 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.15 displaystring read-only
Status: Current Input for all IRD models.
                 inputStatusIpiLinkStatus 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.16 displaystring read-only
Status: IPI Ethernet Link Status.
                 inputStatusIpiSignal 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.17 displaystring read-only
Status: IPI Signal Encapsulation Lock Status.
                 inputStatusIpiFecLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.18 displaystring read-only
Status: FEC Lock Status.
                 inputStatusIpiPcrLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.19 displaystring read-only
Status: Indicates if PCR is received without errors or not.
                 inputStatusIpiDelLatency 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.20 displaystring read-only
Status: Dejitter Buffer Latency.
                 inputStatusIpiData1SrcIP 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.21 ipaddress read-only
Status: DATA1 Source IP Selected.
                 inputStatusIpiData2SrcIP 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.22 ipaddress read-only
Status: DATA2 Source IP Selected.
                 inputStatusIpiData1TsType 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.23 displaystring read-only
Status: DATA1 Source Transport Type.
                 inputStatusIpiData2TsType 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.24 displaystring read-only
Status: DATA2 Source Transport Type.
     siRcvTable 1.3.6.1.4.1.1429.2.2.5.5.4
         siRcvOptionTable 1.3.6.1.4.1.1429.2.2.5.5.4.1 no-access
Rcv Option Table.
             siRcvOptionEntry 1.3.6.1.4.1.1429.2.2.5.5.4.1.1 no-access
Entry for Rcv Option Table.
                 siRcvOptionInstance 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.1 integer32 no-access
Instance for siRcvOptionTable.
                 siRcvOptionAcqMode 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.2 integer read-write
Custom Tuning Mode: Acquisition Mode. Enumeration: 'auto': 2, 'custom': 3, 'basic': 1.
                 siRcvOptionReacq 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.3 integer read-write
Set this variable to yes( 2 ) to reacquire signal. Enumeration: 'writeOnly': 1, 'yes': 2.
                 siRcvOptionNetID 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.4 integer32 read-write
Network ID.
                 siRcvOptionInputSel 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.5 integer read-write
UserCfg locks to RF input set by the user and SW Map uses Orbital Position settings to select RF input. It is recommended to set Validate Orbital Position to 'Yes' for SW Mapped option. Enumeration: 'swMap': 2, 'userCfg': 1.
                 siRcvOptionFreqSel 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.6 integer read-write
Custom Tuning Mode: Frequency Tuning Mode: NIT/Preset. Enumeration: 'userCfg': 2, 'nit': 1.
                 siRcvOptionServListMode 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.7 integer read-write
Custom Tuning Mode: Service List Mode: Rigorous/Degraded. Enumeration: 'rigorous': 1, 'degraded': 2.
                 siRcvOptionUseBAT 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.8 integer read-only
Custom Tuning Mode:Bouquet Association Table in Service List. Enumeration: 'yes': 2, 'no': 1.
                 siRcvOptionUseNIT 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.9 integer read-write
Custom Tuning Mode:Network Information Table in Service List. Enumeration: 'yes': 2, 'no': 1.
                 siRcvOptionUseSDT 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.10 integer read-write
Custom Tuning Mode:Service Description Table in Service List. Enumeration: 'yes': 2, 'no': 1.
                 siRcvOptionUsePAT 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.11 integer read-write
Custom Tuning Mode:Program Association Table in Service List. Enumeration: 'yes': 2, 'no': 1.
         siRcvOptionStatusTable 1.3.6.1.4.1.1429.2.2.5.5.4.2 no-access
Rcv Option Status Table.
             siRcvOptionStatusEntry 1.3.6.1.4.1.1429.2.2.5.5.4.2.1 no-access
Entry for Rcv Option Status Table.
                 siRcvOptionStatusInstance 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.1 integer32 no-access
Instance of siRcv Option Status Table.
                 siRcvOptionLastChanReas 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.2 integer read-only
Source of the last tuning. Enumeration: 'preset': 4, 'uplinkForceRetune': 2, 'userEntry': 3, 'nit': 1.
                 siRcvOptionLastActivated 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.3 displaystring read-only
Last Preset Activated number.The range is from 0 to 64.
                 siRcvOptionStatusFreqSel 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.4 integer read-only
Status of Frequency tuning mode. Enumeration: 'userCfg': 2, 'nit': 1.
                 siRcvOptionStatusServListMode 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.5 integer read-only
Status of Service list mode. Enumeration: 'rigorous': 1, 'degraded': 2.
                 siRcvOptionStatusUseBAT 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.6 integer read-only
Status of Bouquet Association Table in Service List. Enumeration: 'yes': 2, 'no': 1.
                 siRcvOptionStatusUseNIT 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.7 integer read-only
Status of Network Information Table in Service List. Enumeration: 'yes': 2, 'no': 1.
                 siRcvOptionStatusUseSDT 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.8 integer read-only
Status of Service Description Table in Service List. Enumeration: 'yes': 2, 'no': 1.
                 siRcvOptionStatusUsePAT 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.9 integer read-only
Status of Program Association Table in Service List. Enumeration: 'yes': 2, 'no': 1.
         siInfoRxTable 1.3.6.1.4.1.1429.2.2.5.5.4.3 no-access
Service information Receive table.
             siInfoRxEntry 1.3.6.1.4.1.1429.2.2.5.5.4.3.1 no-access
Entry for Service Information Received.
                 siInfoRxInstance 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.1 integer32 no-access
Instance of SI Info Receive table.
                 siInfoRxIdx 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.2 integer32 no-access
Service Information Receive Table Index.
                 siInfoRxType 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.3 integer read-only
Service Information Receive Table Type. Enumeration: 'pmt': 3, 'nitother': 6, 'oeitpf': 11, 'cdt': 27, 'st': 17, 'mct': 28, 'pat': 1, 'oeitES': 14, 'sit': 20, 'tot': 18, 'invalidtableid': 32, 'mit': 30, 'sdt': 7, 'mpe': 24, 'mat': 29, 'ecmodd': 21, 'tsdt': 4, 'aeitES0': 12, 'aeitES1': 13, 'ect': 31, 'rst': 16, 'sdtother': 8, 'aeitpf': 10, 'nit': 5, 'tdt': 15, 'bat': 9, 'emm': 23, 'ecmeven': 22, 'drt': 26, 'cat': 2, 'dit': 19, 'dpi': 25.
                 siInfoRxIDExt 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.4 displaystring read-only
Service Information Receive Table ID Extension. The range is from 0 to 4294967295.
                 siInfoRxUid 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.5 displaystring read-only
Service Information Receive Unique ID. The range is from 1 to 32.
                 siInfoRxStatus 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.6 integer read-only
Service Information Receive Status. Enumeration: 'none': 1, 'full': 3, 'partial': 2, 'lost': 6, 'update': 4, 'timeout': 5.
                 siInfoRxVer 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.7 displaystring read-only
Service Information Version. The range is from 0 to 4294967295.
                 siInfoRxPID 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.8 displaystring read-only
Service Information Program ID. The range is from 0 to 8192.
                 siInfoRxSections 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.9 displaystring read-only
Service Information Number of Sections. The range is from 0 to 4294967295.
         siInfoTsTable 1.3.6.1.4.1.1429.2.2.5.5.4.4 no-access
Transport Stream table.
             siInfoTsEntry 1.3.6.1.4.1.1429.2.2.5.5.4.4.1 no-access
Entry for Transport stream table.
                 siInfoTsInstance 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.1 integer32 no-access
Transport Stream Table Instance.
                 siInfoTsIdx 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.2 integer32 no-access
Service Information Transport Stream Index.
                 siInfoTsId 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.3 displaystring read-only
Frequency Plan: Service Information Transport Stream ID. The range is from 0 to 4294967295.
                 siInfoTsFreq 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.4 displaystring read-only
Frequency Plan: Service Information Frequency The range is from 0.000000 to 15.000000 GHz in steps of 0.000001 GHz.
                 siInfoTsSymRate 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.5 displaystring read-only
Frequency Plan: Service Information Symbol Rate. The range is from 1.0000 to 45.0000 Megasym/second in steps of 0.0001 Megasym.
                 siInfoTsOrbPosn 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.6 displaystring read-only
Frequency Plan: Service Information Orbital Position. The range is from 0.0 to 360.0 .
                 siInfoTsPolar 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.7 integer read-only
Frequency Plan: Service Information Polarization. Enumeration: 'leftCircular': 3, 'rightCircular': 4, 'horizontal': 1, 'vertical': 2, 'auto': 5.
                 siInfoTsFEC 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.8 integer read-only
Frequency Plan: Service Information Forward Error Correction Rate. Enumeration: 'nineTenth': 10, 'twoThird': 4, 'fourFifth': 6, 'auto': 11, 'notApplicable': 1, 'sevenEighth': 8, 'fiveSixth': 7, 'half': 2, 'threeQuarter': 5, 'threeFifth': 3, 'eightNinth': 9.
                 siInfoTsModulation 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.9 integer read-only
Frequency Plan: Service Information Modulation. Enumeration: 'notapplicable': 1, 'sixteenQamDvbsS2': 5, 'eightPskDvbS2': 4, 'qpskDvbS': 2, 'qpskDvbS2': 3.
                 siInfoTsOrgNetID 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.10 displaystring read-only
Frequency Plan: Service Information Original Network ID. The range is from 0 to 4294967295.
                 siInfoTsEastWestFlag 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.11 integer read-only
Frequency Plan: Service Information East West flag. Enumeration: 'west': 2, 'east': 1, 'notApplicable': 3.
         siInfoVCInfoTable 1.3.6.1.4.1.1429.2.2.5.5.4.5 no-access
VC table.
             siInfoVCInfoEntry 1.3.6.1.4.1.1429.2.2.5.5.4.5.1 no-access
Entry for VC information.
                 siInfoVCInfoInstance 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.1 integer32 no-access
Virtual Channel Info table Instance.
                 siInfoVCInfoIdx 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.2 integer32 no-access
Virtual Channel Info table Index.
                 siInfoVCInfoId 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.3 displaystring read-only
Service Information VC Service ID. The range is from 0 to 4294967295.
                 siInfoVCInfoTxID 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.4 displaystring read-only
Service Information VC Transport Stream ID. The range is from 0 to 4294967295.
                 siInfoVCInfoProgName 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.5 displaystring read-only
Service Information VC Programme Name.
                 siInfoVCInfoPMTPID 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.6 displaystring read-only
Service Information VC Program Map Table Program ID.
                 siInfoVCInfoCHType 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.7 integer read-only
Service Type:TV service/ Radio service. Enumeration: 'tv': 1, 'other': 3, 'radio': 2.
                 siInfoVCInfoECMPID 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.8 displaystring read-only
Service Information VC Entitlement Control Message Program ID.
                 siInfoVCInfoAuthorized 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.9 integer read-only
Service List: Channel Authorized: Yes/No. Enumeration: 'yes': 2, 'no': 1.