CISCO-DMN-DSG-Cueing-MIB: View SNMP OID List / Download MIB

VENDOR: SCIENTIFIC-ATLANTA


 Home MIB: CISCO-DMN-DSG-Cueing-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, CISCO-DMN-DSG-ROOT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ciscoDSGCueing 1.3.6.1.4.1.1429.2.2.5.33
Cisco Cueing MIB.
       cueingMode 1.3.6.1.4.1.1429.2.2.5.33.1 integer read-write
Selection of Cueing Mode. Enumeration: 'trigger': 1, 'tone': 2.
       cueingTrigPol 1.3.6.1.4.1.1429.2.2.5.33.2 integer read-write
Selection of Cueing Trigger Polarity. Enumeration: 'high': 2, 'low': 1.
       cueingRepeatCnt 1.3.6.1.4.1.1429.2.2.5.33.3 integer32 read-write
Cueing Tone repeat count.
       cueingTone 1.3.6.1.4.1.1429.2.2.5.33.4 integer32 read-write
Cueing Tone duration in milliseconds.
       cueingSilence 1.3.6.1.4.1.1429.2.2.5.33.5 integer32 read-write
Silence duration in milliseconds.
       cueingRelayMode 1.3.6.1.4.1.1429.2.2.5.33.6 integer read-write
Selection of Relay Mode. Enumeration: 'alarm': 1, 'trigger': 2.
       cueingRelayTrigBit 1.3.6.1.4.1.1429.2.2.5.33.7 integer32 read-write
Selection of Relay trigger bit.
       cueingTestToneSequence 1.3.6.1.4.1.1429.2.2.5.33.8 integer32 read-write
Cueing test tone sequence.
       cueingTestToneStartStop 1.3.6.1.4.1.1429.2.2.5.33.9 integer read-write
Cueing test tone start/stop. Enumeration: 'start': 1, 'stop': 2.
       cueingTestToneGo 1.3.6.1.4.1.1429.2.2.5.33.10 integer read-write
Cueing test tone go. Enumeration: 'yes': 2, 'no': 1.
       cueingTable 1.3.6.1.4.1.1429.2.2.5.33.11
             cueingToneSeqTable 1.3.6.1.4.1.1429.2.2.5.33.11.1 no-access
Cueing Tone sequence Table.
                 cueingToneSeqEntry 1.3.6.1.4.1.1429.2.2.5.33.11.1.1 no-access
Entry for Cueing tone table.
                     cueingToneSeqNum 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.1 integer32 no-access
Cueing Tone sequence number selection.
                     cueingToneSeqState 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.2 integer read-write
Contact Tone Sequence state selection. Enumeration: 'enable': 2, 'disable': 1.
                     cueingToneSeqTones 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.3 integer32 read-write
Cueing Tone sequence tones.
                     cueingToneSeqMode 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.4 integer read-write
Contact Tone Sequence mode selection. Enumeration: 'start': 1, 'stop': 2, 'both': 3.
                     cueingToneSeqDelay 1.3.6.1.4.1.1429.2.2.5.33.11.1.1.5 integer32 read-write
Cueing Tone sequence delay in seconds.