CIENA-WS-NOTIFICATION-MIB: View SNMP OID List / Download MIB

VENDOR: CIENA CORPORATION


 Home MIB: CIENA-WS-NOTIFICATION-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, CIENA-WS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cienaWsNotificationMIB 1.3.6.1.4.1.1271.3.2.3
Notification definitions for Waveserver. Contains alarm notifications and link state defects.
 wsAlarmNotification 1.3.6.1.4.1.1271.3.2.11
Ciena Wavesever notification for an alarm raising or clearing
       wsAlarmNotificationSiteId 1.3.6.1.4.1.1271.3.2.11.1 unsigned32 read-only
The system Site ID.
       wsAlarmNotificationGroupId 1.3.6.1.4.1.1271.3.2.11.2 unsigned32 read-only
The system Group ID.
       wsAlarmNotificationMemberId 1.3.6.1.4.1.1271.3.2.11.3 unsigned32 read-only
The system Member ID.
       wsAlarmNotificationInstanceId 1.3.6.1.4.1.1271.3.2.11.4 unsigned32 read-only
The alarm Instance ID.
       wsAlarmNotificationDateAndTime 1.3.6.1.4.1.1271.3.2.11.5 displaystring32 read-only
The local date and time when alarm was raised.
       wsAlarmNotificationTableId 1.3.6.1.4.1.1271.3.2.11.6 unsigned32 read-only
The alarm table ID.
       wsAlarmNotificationSeverity 1.3.6.1.4.1.1271.3.2.11.7 integer read-only
The alarm severity. Enumeration: 'info': 8, 'major': 4, 'warning': 6, 'critical': 3, 'cleared': 1, 'minor': 5.
       wsAlarmNotificationInstance 1.3.6.1.4.1.1271.3.2.11.8 displaystring32 read-only
The object instance the alarm is raised against.
       wsAlarmNotificationDescription 1.3.6.1.4.1.1271.3.2.11.9 displaystring32 read-only
The alarm description.
       wsAlarmNotificationActiveStatus 1.3.6.1.4.1.1271.3.2.11.10 truthvalue read-only
The alarm active status.
       wsAlarmNotificationEntityType 1.3.6.1.4.1.1271.3.2.11.11 integer read-only
The alarm source entity type if applicable. Enumeration: 'notApplicable': 0, 'clientPort': 2, 'other': 1, 'linePort': 3.
 wsLinkStateAlarmNotification 1.3.6.1.4.1.1271.3.2.12
Ciena Waveserver notification for line faults.
       wsLinkStateAlarmNotificationSiteId 1.3.6.1.4.1.1271.3.2.12.1 unsigned32 read-only
The line fault site ID.
       wsLinkStateAlarmNotificationGroupId 1.3.6.1.4.1.1271.3.2.12.2 unsigned32 read-only
The system Group ID.
       wsLinkStateAlarmNotificationMemberId 1.3.6.1.4.1.1271.3.2.12.3 unsigned32 read-only
The system Member ID.
       wsLinkStateAlarmNotificationInstanceId 1.3.6.1.4.1.1271.3.2.12.4 unsigned32 read-only
The line fault instance ID.
       wsLinkStateAlarmNotificationDateAndTime 1.3.6.1.4.1.1271.3.2.12.5 displaystring32 read-only
The local date and time when alarm was raised.
       wsLinkStateAlarmNotificationSeverity 1.3.6.1.4.1.1271.3.2.12.7 integer read-only
The alarm severity. Enumeration: 'info': 8, 'major': 4, 'warning': 6, 'critical': 3, 'cleared': 1, 'minor': 5.
       wsLinkStateAlarmNotificationInstance 1.3.6.1.4.1.1271.3.2.12.8 displaystring32 read-only
The object instance the alarm is raised against.
       wsLinkStateAlarmNotificationDescription 1.3.6.1.4.1.1271.3.2.12.9 displaystring32 read-only
The alarm description.
       wsLinkStateAlarmNotificationPtpDefects 1.3.6.1.4.1.1271.3.2.12.10
Defects related to the physical termination point.
             wsLinkStateAlarmNotificationPtpRxLos 1.3.6.1.4.1.1271.3.2.12.10.1 integer read-only
PTP alarms for the link. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationPtpRxLol 1.3.6.1.4.1.1271.3.2.12.10.2 integer read-only
PTP alarms for the link. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationPtpTxLos 1.3.6.1.4.1.1271.3.2.12.10.3 integer read-only
PTP alarms for the link. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationPtpTxLol 1.3.6.1.4.1.1271.3.2.12.10.4 integer read-only
PTP alarms for the link. Enumeration: 'active': 1, 'inactive': 0.
       wsLinkStateAlarmNotificationEthDefects 1.3.6.1.4.1.1271.3.2.12.11
Ethernet defects.
             wsLinkStateAlarmNotificationEthPcsHighBer 1.3.6.1.4.1.1271.3.2.12.11.1 integer read-only
Ethernet PCS high bit error rate. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationEthPcsLoam 1.3.6.1.4.1.1271.3.2.12.11.2 integer read-only
Ethernet PCS loss of alignment marker. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationEthPcsLobl 1.3.6.1.4.1.1271.3.2.12.11.3 integer read-only
Ethernet PCS loss of block lock. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationEthRsLinkDown 1.3.6.1.4.1.1271.3.2.12.11.4 integer read-only
Ethernet RS link down. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationEthRsLf 1.3.6.1.4.1.1271.3.2.12.11.5 integer read-only
Ethernet RS local fault. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationEthRsRf 1.3.6.1.4.1.1271.3.2.12.11.6 integer read-only
Ethernet RS remote fault. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationEthFecLossSync 1.3.6.1.4.1.1271.3.2.12.11.7 integer read-only
Ethernet FEC loss of alignment marker. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationEthPmaSool 1.3.6.1.4.1.1271.3.2.12.11.8 integer read-only
Ethernet PMA serdes out of lock. Enumeration: 'active': 1, 'inactive': 0.
       wsLinkStateAlarmNotificationOtuDefects 1.3.6.1.4.1.1271.3.2.12.12
OTU layer defects.
             wsLinkStateAlarmNotificationOtuLoc 1.3.6.1.4.1.1271.3.2.12.12.1 integer read-only
OTU loss of clock. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOtuFreqOor 1.3.6.1.4.1.1271.3.2.12.12.2 integer read-only
OTU frequency out of range. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOtuLof 1.3.6.1.4.1.1271.3.2.12.12.3 integer read-only
OTU loss of frame. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOtuPreFecSf 1.3.6.1.4.1.1271.3.2.12.12.4 integer read-only
OTU pre-FEC signal fail. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOtuPreFecSd 1.3.6.1.4.1.1271.3.2.12.12.5 integer read-only
OTU pre-FEC signal degrade. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOtuLom 1.3.6.1.4.1.1271.3.2.12.12.6 integer read-only
OTU loss of multi-frame. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOtuBdi 1.3.6.1.4.1.1271.3.2.12.12.7 integer read-only
OTU backwards defect indicator. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOtuTtiMismatch 1.3.6.1.4.1.1271.3.2.12.12.8 integer read-only
OTU TTI mismatch. Enumeration: 'active': 1, 'inactive': 0.
       wsLinkStateAlarmNotificationOduDefects 1.3.6.1.4.1.1271.3.2.12.13
ODU layer defects.
             wsLinkStateAlarmNotificationOduOci 1.3.6.1.4.1.1271.3.2.12.13.1 integer read-only
ODU open connection indication. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduAis 1.3.6.1.4.1.1271.3.2.12.13.2 integer read-only
ODU alarm indicating signal. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduLck 1.3.6.1.4.1.1271.3.2.12.13.3 integer read-only
ODU locked. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduSf 1.3.6.1.4.1.1271.3.2.12.13.4 integer read-only
ODU signal fail. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduSd 1.3.6.1.4.1.1271.3.2.12.13.5 integer read-only
ODU signal degrade. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduTtiMismatch 1.3.6.1.4.1.1271.3.2.12.13.6 integer read-only
ODU TTI mismatch. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduBdi 1.3.6.1.4.1.1271.3.2.12.13.7 integer read-only
ODU backwards defect indicator. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduPtiMismatch 1.3.6.1.4.1.1271.3.2.12.13.8 integer read-only
ODU payload type indicator mismatch. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduFeClientSf 1.3.6.1.4.1.1271.3.2.12.13.9 integer read-only
ODU far-end client signal fail. Enumeration: 'active': 1, 'inactive': 0.
             wsLinkStateAlarmNotificationOduSkewOor 1.3.6.1.4.1.1271.3.2.12.13.10 integer read-only
ODU skew out of range. Enumeration: 'active': 1, 'inactive': 0.
       wsLinkStateAlarmNotificationEntityType 1.3.6.1.4.1.1271.3.2.12.14 integer read-only
The alarm source entity type if applicable. Enumeration: 'notApplicable': 0, 'clientPort': 2, 'other': 1, 'linePort': 3.