CIE1000-POE-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CIE1000-POE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cie1000PoeMib 1.3.6.1.4.1.9.9.832.1.43
This is a private version of Power over Ethernet(PoE).
       cie1000PoeMibObjects 1.3.6.1.4.1.9.9.832.1.43.1
           cie1000PoeCapabilities 1.3.6.1.4.1.9.9.832.1.43.1.1
               cie1000PoeCapabilitiesInterfaceTable 1.3.6.1.4.1.9.9.832.1.43.1.1.1 no-access
This is a table to interface capabilities
                   cie1000PoeCapabilitiesInterfaceEntry 1.3.6.1.4.1.9.9.832.1.43.1.1.1.1 no-access
Each interface has a set of capability parameters
                       cie1000PoeCapabilitiesInterfaceIfIndex 1.3.6.1.4.1.9.9.832.1.43.1.1.1.1.1 cie1000interfaceindex no-access
Logical interface number.
                       cie1000PoeCapabilitiesInterfacePoE 1.3.6.1.4.1.9.9.832.1.43.1.1.1.1.2 truthvalue read-only
Indicates whether interface is PoE capable or not.
           cie1000PoeConfig 1.3.6.1.4.1.9.9.832.1.43.1.2
               cie1000PoeConfigGlobals 1.3.6.1.4.1.9.9.832.1.43.1.2.1
                   cie1000PoeConfigGlobalsManagementMode 1.3.6.1.4.1.9.9.832.1.43.1.2.1.1 cie1000poemgmtmodetype read-write
PoE management modes, six PoE management modes are supported. CLASS_RESERVED: Maximum port power determined by class, and power is managed according to power consumption. CLASS_CONSUMP: Maximum port power determined by class, and power is managed according to reserved power. ALLOCATED_RESERVED: Maximum port power determined by allocation, and power is managed according to power consumption. ALLOCATED_CONSUMP: Maximum port power determined by allocation, and power is managed according to reserved power. LLDPMED_RESERVED: Maximum port power determined by LLDP Media protocol, and power is managed according to reserved power. LLDPMED_CONSUMP: Maximum port power determined by LLDP Media protocol, and power is managed according to power consumption.
               cie1000PoeConfigSwitch 1.3.6.1.4.1.9.9.832.1.43.1.2.2
                   cie1000PoeConfigSwitchParamTable 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1 no-access
This is a table to configure PoE configurations for a switch.
                       cie1000PoeConfigSwitchParamEntry 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1 no-access
Each switch has a set of PoE configurable parameters
                           cie1000PoeConfigSwitchParamSwitchId 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.1 unsigned32 no-access
User Switch Id.
                           cie1000PoeConfigSwitchParamMaxPower 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.2 integer32 read-write
The Maximum power(in Watt) that the power sourcing equipment(such as switch) can deliver.
                           cie1000PoeConfigSwitchParamCapacitorDetection 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.3 truthvalue read-write
Indicates whether switch capacitor detection feature is enabled or not.
               cie1000PoeConfigInterface 1.3.6.1.4.1.9.9.832.1.43.1.2.3
                   cie1000PoeConfigInterfaceParamTable 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1 no-access
This is a table to configure PoE configurations for a specific interface.
                       cie1000PoeConfigInterfaceParamEntry 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1 no-access
Each interface has a set of PoE configurable parameters
                           cie1000PoeConfigInterfaceParamIfIndex 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.1 cie1000interfaceindex no-access
Logical interface number.
                           cie1000PoeConfigInterfaceParamMode 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.2 cie1000poemodetype read-write
Set PoE mode or disable PoE feature, two PoE modes are supported. POE: Enables PoE based on IEEE 802.3af standard, and provides power up to 15.4W(154 deciwatt) of DC power to powered device. When changing to standard mode the MaxPower is automatically adjust to 15.4 W, if it currently exceeds 15.4 W. POE_PLUS: Enabled PoE based on IEEE 802.3at standard, and provides power up to 30W(300 deciwatt) of DC power to powered device.
                           cie1000PoeConfigInterfaceParamPriority 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.3 cie1000poepowerprioritytype read-write
Set port power priority. Priority determines the order in which the interfaces will receive power. Interfaces with a higher priority will receive power before interfaces with a lower priority. PRIORITY_LOW means lowest priority. PRIORITY_HIGH means medium priority. PRIORITY_CRITICAL means highest priority.
                           cie1000PoeConfigInterfaceParamMaxPower 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.4 integer32 read-write
Maximum port power(in deciwatt) that can be delivered to remote device. Maximum allowed values from 0 to 154 deciwatt in POE standard mode, and from 0 to 300 deciwatt in POE plus mode.
           cie1000PoeStatus 1.3.6.1.4.1.9.9.832.1.43.1.3
               cie1000PoeStatusInterfaceTable 1.3.6.1.4.1.9.9.832.1.43.1.3.1 no-access
This is a table to Power over Ethernet interface status
                   cie1000PoeStatusInterfaceEntry 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1 no-access
Each interface has a set of status parameters
                       cie1000PoeStatusInterfaceIfIndex 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.1 cie1000interfaceindex no-access
Logical interface number.
                       cie1000PoeStatusInterfacePDClass 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.2 integer32 read-only
Powered device(PD) negotiates a power class with sourcing equipment(PSE) during the time of initial connection, each class have a maximum supported power. Class assigned to PD is based on PD electrical characteristics. Value -1 means either PD attached to the interface can not advertise its power class or no PD detected or PoE is not supported or PoE feature is disabled or unsupported PD class(classes 0-4 is supported).
                       cie1000PoeStatusInterfaceCurrentState 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.3 cie1000poestatustype read-only
Indicate port status. POWER_BUDGET_EXCEEDED: PoE is turned OFF due to power budget exceeded on PSE. NO_PD_DETECTED: No PD detected. PD_ON: PSE supplying power to PD through PoE. PD_OVERLOAD: PD consumes more power than the maximum limit configured on the PSE port.
                       cie1000PoeStatusInterfacePowerConsumption 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.4 integer32 read-only
Indicates the power(in deciwatt) that the PD is consuming right now.
                       cie1000PoeStatusInterfacePowerReserved 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.5 integer32 read-only
Indicates the power(in deciwatt) that the PD has requested/reserved.
                       cie1000PoeStatusInterfaceCurrentConsumption 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.6 integer32 read-only
Indicates the current(in mA) that the PD is consuming right now.
       cie1000PoeMibConformance 1.3.6.1.4.1.9.9.832.1.43.2
           cie1000PoeMibCompliances 1.3.6.1.4.1.9.9.832.1.43.2.1
               cie1000PoeMibCompliance 1.3.6.1.4.1.9.9.832.1.43.2.1.1
The compliance statement for the implementation.
           cie1000PoeMibGroups 1.3.6.1.4.1.9.9.832.1.43.2.2
               cie1000PoeCapabilitiesInterfaceInfoGroup 1.3.6.1.4.1.9.9.832.1.43.2.2.1
A collection of objects.
               cie1000PoeConfigGlobalsInfoGroup 1.3.6.1.4.1.9.9.832.1.43.2.2.2
A collection of objects.
               cie1000PoeConfigSwitchParamTableInfoGroup 1.3.6.1.4.1.9.9.832.1.43.2.2.3
A collection of objects.
               cie1000PoeConfigInterfaceParamTableInfoGroup 1.3.6.1.4.1.9.9.832.1.43.2.2.4
A collection of objects.
               cie1000PoeStatusInterfaceTableInfoGroup 1.3.6.1.4.1.9.9.832.1.43.2.2.5
A collection of objects.