CENTILLION-ATMMON-MIB: View SNMP OID List / Download MIB

VENDOR: CENTILLION NETWORKS


 Home MIB: CENTILLION-ATMMON-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 atmPortMonitor 1.3.6.1.4.1.930.2.2.2.1
     atmPortStatTable 1.3.6.1.4.1.930.2.2.2.1.1 no-access
ATM Port Statistics
         atmPortStatEntry 1.3.6.1.4.1.930.2.2.2.1.1.1 no-access
ATM Port Statistics. Each entry is indexed by two fields: The card number and the port number.
             atmStatCardId 1.3.6.1.4.1.930.2.2.2.1.1.1.1 cardid read-only
This field is the card index
             atmStatPortId 1.3.6.1.4.1.930.2.2.2.1.1.1.2 portid read-only
This field is the port index
             atmSigDetected 1.3.6.1.4.1.930.2.2.2.1.1.1.3 integer read-only
This bit field indicates if the port receives signal from the remote ATM port. 1= signal present, 2= no signal. Enumeration: 'signalpresent': 1, 'nosignal': 2.
             atmRxBadHecCell 1.3.6.1.4.1.930.2.2.2.1.1.1.4 counter read-only
The number of cells received that has a bad ATM cell header (HEC). The error is usually due to a physical layer problem. For example, when the fiber is first connected to the system or a clock mismatch.
             atmRxDmaDropCell 1.3.6.1.4.1.930.2.2.2.1.1.1.5 counter read-only
The number of cells received but is discarded by the ATM header validation checking. The error is usually due to a incorrectly configured VPI/VCI or other configuration error.
             atmRxGoodCell 1.3.6.1.4.1.930.2.2.2.1.1.1.6 counter read-only
The number of cells received that is valid.
             atmTxDmaDropCell 1.3.6.1.4.1.930.2.2.2.1.1.1.7 counter read-only
The number of outgoing cells dropped due to congestions.
             atmTxGoodCell 1.3.6.1.4.1.930.2.2.2.1.1.1.8 counter read-only
The number of cells transmitted.
             atmSuniFifoOverrun 1.3.6.1.4.1.930.2.2.2.1.1.1.9 counter read-only
The number of times that the SUNI FIFO overrun status bit has been read in the true state.
 atmElanMonitor 1.3.6.1.4.1.930.2.2.2.2
     atmElanPvcStatisticTable 1.3.6.1.4.1.930.2.2.2.2.1 no-access
Tmp ATM Elan PVC statistics
         atmElanPvcStatisticEntry 1.3.6.1.4.1.930.2.2.2.2.1.1 no-access
ATM Elan PVC statistics. The Elan ID is used as the index of the object.
             atmElanId 1.3.6.1.4.1.930.2.2.2.2.1.1.1 integer read-only
The Elan index.
             atmElanPvcInUcastPkt 1.3.6.1.4.1.930.2.2.2.2.1.1.2 integer read-only
The number of unicast packet that is received from this Elan PVC.
             atmElanPvcInMcastPkt 1.3.6.1.4.1.930.2.2.2.2.1.1.3 integer read-only
The number of multicast packet that is received from this Elan PVC.
             atmElanPvcOutUcastPkt 1.3.6.1.4.1.930.2.2.2.2.1.1.4 integer read-only
The number of unicast packet that is transmitted from this Elan PVC.
             atmElanPvcOutMcastPkt 1.3.6.1.4.1.930.2.2.2.2.1.1.5 integer read-only
The number of unicast packet that is transmitted from this Elan PVC.
 atmPvcStatusMonitor 1.3.6.1.4.1.930.2.2.2.3
     atmPvcStatusTable 1.3.6.1.4.1.930.2.2.2.3.1 no-access
Tmp ATM InterSwitch PVC status
         atmPvcStatusEntry 1.3.6.1.4.1.930.2.2.2.3.1.1 no-access
ATM PVC status. The PVC circuit ID is used as the index of the object.
             atmPvcCktId 1.3.6.1.4.1.930.2.2.2.3.1.1.1 integer read-only
This field is the index of the circuit.
             atmPvcElanId 1.3.6.1.4.1.930.2.2.2.3.1.1.2 integer read-only
This field is the index of the elan this circuit belongs to.
             atmPvcRemoteSwitchInfoValid 1.3.6.1.4.1.930.2.2.2.3.1.1.3 integer read-only
This field is based on the aging timer of a remote switch. If the local switch has not received any packets from the remote switch for a period of time, then it is declared as non-valid. 1 = non-valid 2 = valid (normal state of operation). Enumeration: 'valid': 1, 'invalid': 2.
             atmPvcRemoteSwitchMacAddress 1.3.6.1.4.1.930.2.2.2.3.1.1.4 macaddress read-only
This field lists the remote switch's MAC address. If the atmInterSwitchPvcRemoteSwitchInfoValid object is 1, then this field contains the valid info. Otherwise, this field contains the last learned info.
             atmPvcRemoteSwitchPvcStatus 1.3.6.1.4.1.930.2.2.2.3.1.1.5 integer read-only
This field is set if the remote switch receives packets from this switch. If atmInterSwitchPvcRemoteSwitchInfoValid objeect is 1, then this field contains the valid info. Otherwise, this field contains the last learned info. Enumeration: 'down': 2, 'up': 1.
             atmPvcSTPState 1.3.6.1.4.1.930.2.2.2.3.1.1.6 integer read-only
This field indicates the STP port state of the circuit. Enumeration: 'disabled': 1, 'learning': 4, 'forwarding': 5, 'blocking': 2, 'listening': 3.
             atmPvcRemoteElanId 1.3.6.1.4.1.930.2.2.2.3.1.1.7 integer read-only
This field indicates the elan ID of the circuit.
             atmPvcRemoteMcpIpAddress 1.3.6.1.4.1.930.2.2.2.3.1.1.8 ipaddress read-only
This is the remote mcp ip address.
 atmSigMonitor 1.3.6.1.4.1.930.2.2.2.4
     cnCurPtptConns 1.3.6.1.4.1.930.2.2.2.4.1 integer read-only
This counter counts the number of current point-to-point calls of the switch.
     cnCurPtmptConns 1.3.6.1.4.1.930.2.2.2.4.2 integer read-only
This counter counts the number of current point-to-multipoint calls of the switch.
     cnCurActiveConns 1.3.6.1.4.1.930.2.2.2.4.3 integer read-only
This counter counts the number of current active calls of the switch.
     cnCurPortConnsTable 1.3.6.1.4.1.930.2.2.2.4.4 no-access
This table contains the point-to-point, point-to-multipoint and active calls per port for all the atm ports in the switch.
         cnCurPortConnsEntry 1.3.6.1.4.1.930.2.2.2.4.4.1 no-access
This entry contains the point-to-point, point-to-multipoint and active calls per port.
             cnCurPortConnsPtptConns 1.3.6.1.4.1.930.2.2.2.4.4.1.1 integer read-only
This entry counts the number of current point-to-point calls per port.
             cnCurPortConnsPtmptConns 1.3.6.1.4.1.930.2.2.2.4.4.1.2 integer read-only
This entry counts the number of current point-to-multipoint calls per port.
             cnCurPortConnsActiveConns 1.3.6.1.4.1.930.2.2.2.4.4.1.3 integer read-only
This entry counts the number of current active calls per port.
 atmCardMonitor 1.3.6.1.4.1.930.2.2.2.5
     atmCardOperTable 1.3.6.1.4.1.930.2.2.2.5.1 no-access
ATM Card Operational values
         atmCardOperEntry 1.3.6.1.4.1.930.2.2.2.5.1.1 no-access
ATM Card Operational values. Each entry is indexed by card number
             atmCardOperCardId 1.3.6.1.4.1.930.2.2.2.5.1.1.1 cardid read-only
This field is the card index
             atmCardOperExtClockSource 1.3.6.1.4.1.930.2.2.2.5.1.1.2 integer read-only
This field indicates the operational external clock source. The following value is read-only: 0 = Local Oscillator, 1..N = ATM port id for external clock source. This object only applies to ATM MDA modules with SM, MM, or UTP media types.
 atmStatusEnqMonitor 1.3.6.1.4.1.930.2.2.2.6
     cnStsEnqPTPCalls 1.3.6.1.4.1.930.2.2.2.6.1 integer read-only
The number of current point-to-point calls in the status enquiry queue of the switch.
     cnStsEnqActiveParties 1.3.6.1.4.1.930.2.2.2.6.2 integer read-only
The number of current active parties in the status enquiry queue of the switch. (This includes point- to-multi-point calls).
     cnStsEnqSent 1.3.6.1.4.1.930.2.2.2.6.3 integer read-only
The total number of status enquiry requests sent.
     cnStsEnqCfmsRecvd 1.3.6.1.4.1.930.2.2.2.6.4 integer read-only
The number of current status messages (in response to status enquiry) received.
     cnStsEnqRetried 1.3.6.1.4.1.930.2.2.2.6.5 integer read-only
The total number of status enquiry commands retried.
     cnStsEnqTimeOuts 1.3.6.1.4.1.930.2.2.2.6.6 integer read-only
The total number of status enquiry commands timed out i.e The number of calls for which status (in response to status enquiry) was not received.
     cnStsEnqQueueSize 1.3.6.1.4.1.930.2.2.2.6.7 integer read-only
The size of the status enquiry queue.
     cnStsEnqCallsCleared 1.3.6.1.4.1.930.2.2.2.6.8 integer read-only
The number of calls cleared by status enquiry.