CDMIPController: View SNMP OID List / Download MIB

VENDOR: COMTECH EFDATA CORPORATION


 Home MIB: CDMIPController
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ComtechEFData

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cdmipController 1.3.6.1.4.1.6247.4
CDMIP IP Controller
     cdmipAdministration 1.3.6.1.4.1.6247.4.2
         cdmipMibVersion 1.3.6.1.4.1.6247.4.2.1 integer read-only
/*****************************************************************************/ /* * CDM-IP MIB Version Information * * Date App Release MIB Version * ======== =========== =========== * 03/14/02 1.0 1 * * 04/23/02 internal 2 * * 07/31/02 1.1 3 * * 10/15/02 1.2 4 * * 11/25/02 2.1 5 * * 02/19/04 4.0 6 * * 07/12/04 4.2 7 * * 12/31/05 5.3 8 */ /*****************************************************************************/
         cdmipAccessLists 1.3.6.1.4.1.6247.4.2.4
             cdmipAccessIpAddress1 1.3.6.1.4.1.6247.4.2.4.1 ipaddress read-write
Access IP Address #1: Used to restrict modem management through Web, Telnet, or SNMP to specific IP Addresses.
             cdmipAccessSubnetMaskLen1 1.3.6.1.4.1.6247.4.2.4.2 integer read-write
Subnet Mask Length for Access IP Address #1.
             cdmipAccessIpAddress2 1.3.6.1.4.1.6247.4.2.4.3 ipaddress read-write
Access IP Address #2 Used to restrict modem management through Web, Telnet, or SNMP to specific IP Addresses.
             cdmipAccessSubnetMaskLen2 1.3.6.1.4.1.6247.4.2.4.4 integer read-write
Subnet Mask Length for Access IP Address #2.
             cdmipAccessIpAddress3 1.3.6.1.4.1.6247.4.2.4.5 ipaddress read-write
Access IP Address #3: Used to restrict modem management through Web, Telnet, or SNMP to specific IP Addresses.
             cdmipAccessSubnetMaskLen3 1.3.6.1.4.1.6247.4.2.4.6 integer read-write
Subnet Mask Length for Access IP Addres #3.
             cdmipAccessIpAddress4 1.3.6.1.4.1.6247.4.2.4.7 ipaddress read-write
Access IP Address #4: Used to restrict modem management through Web, Telnet, or SNMP to specific IP Addresses.
             cdmipAccessSubnetMaskLen4 1.3.6.1.4.1.6247.4.2.4.8 integer read-write
Subnet Mask Length for Access IP Address #4.
             cdmipAccessListEnforcement 1.3.6.1.4.1.6247.4.2.4.9 integer read-write
Access List Enforcement Note: Be sure that you have added the SNMP browser's/manager's IP Address to the access list before enabling access list filtering. Otherwise, the SNMP browser/manager will no longer be able to gain access to the SNMP agent. Enumeration: 'disabled': 0, 'enforced': 1.
         cdmipFeaturesAvailability 1.3.6.1.4.1.6247.4.2.5
             cdmipQosOption 1.3.6.1.4.1.6247.4.2.5.3 availability read-only
Quality of Server (QoS) FAST Option.
             cdmipEncryptionOption 1.3.6.1.4.1.6247.4.2.5.6 availability read-only
Triple DES Encryption FAST Option.
             cdmipIgmpOption 1.3.6.1.4.1.6247.4.2.5.7 availability read-only
IGMP FAST Option.
             cdmipHeaderCompressionOption 1.3.6.1.4.1.6247.4.2.5.8 availability read-only
IP Header Compression FAST Option.
             cdmipPayloadCompressionOption 1.3.6.1.4.1.6247.4.2.5.9 availability read-only
IP Payload Compression FAST Option.
         cdmipFeaturesConfig 1.3.6.1.4.1.6247.4.2.6
             cdmipTelnetFeature 1.3.6.1.4.1.6247.4.2.6.2 enabledisable read-write
Enable or disable Telnet access for managing the modem.
             cdmipPingReplyFeature 1.3.6.1.4.1.6247.4.2.6.3 enabledisable read-write
Enable or disable ICMP Ping Reply from the modem.
             cdmipDownlinkRouteMulticastFeature 1.3.6.1.4.1.6247.4.2.6.4 enabledisable read-write
Enable or disable 'downlink multicast routing' option (Satellite to Ethernet).
             cdmipQosOpt 1.3.6.1.4.1.6247.4.2.6.7 enabledisable read-write
Enable or disable 'Quality of Service' (QoS) in the modem's router.
             cdmipTransmit3xDesEncryptionOpt 1.3.6.1.4.1.6247.4.2.6.10 integer read-write
Enable or disable 'transmit 3xDES encryption' option. Enumeration: 'enable': 1, 'disable': 0, 'perRoute': 2.
             cdmipIgmpOpt 1.3.6.1.4.1.6247.4.2.6.12 enabledisable read-write
Enable or disable IGMP option.
             cdmipTxHeaderCompressionOpt 1.3.6.1.4.1.6247.4.2.6.13 integer read-write
Enable or disable the Transmit 'IP Header Compression' option. Enumeration: 'enable': 1, 'disable': 0, 'perRoute': 2.
             cdmipRxHeaderCompressionOpt 1.3.6.1.4.1.6247.4.2.6.14 enabledisable read-write
Enable or disable Receive 'IP Header Compression' option.
             cdmipTxPayloadCompressionOpt 1.3.6.1.4.1.6247.4.2.6.15 integer read-write
Enable or disable 'Tx Payload Compression' option. Enumeration: 'enable': 1, 'disable': 0, 'perRoute': 2.
         cdmip3xDesConfig 1.3.6.1.4.1.6247.4.2.7
             cdmipTransmitKey1 1.3.6.1.4.1.6247.4.2.7.3 displaystring read-write
Triple DES (3xDES) Transmit Encrypt Key #1. The key length is 192 bits (24 bytes or 48 HEX characters).
             cdmipTransmitKey2 1.3.6.1.4.1.6247.4.2.7.4 displaystring read-write
Triple DES (3xDES) Transmit Encrypt Key #2. The key length is 192 bits (24 bytes or 48 HEX characters).
             cdmipTransmitKey3 1.3.6.1.4.1.6247.4.2.7.5 displaystring read-write
Triple DES (3xDES) Transmit Encrypt Key #3. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipTransmitKey4 1.3.6.1.4.1.6247.4.2.7.6 displaystring read-write
Triple DES (3xDES) Transmit Encrypt Key #4. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipTransmitKey5 1.3.6.1.4.1.6247.4.2.7.7 displaystring read-write
Triple DES (3xDES) Transmit Encrypt Key #5. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipTransmitKey6 1.3.6.1.4.1.6247.4.2.7.8 displaystring read-write
Triple DES (3xDES) Transmit Encrypt Key #6. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipTransmitKey7 1.3.6.1.4.1.6247.4.2.7.9 displaystring read-write
Triple DES (3xDES) Transmit Encrypt Key #7. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipTransmitKey8 1.3.6.1.4.1.6247.4.2.7.10 displaystring read-write
Triple DES (3xDES) Transmit Encrypt Key #8. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipReceiveKey1 1.3.6.1.4.1.6247.4.2.7.11 displaystring read-write
Triple DES (3xDES) Receive Decrypt Key #1. The key length is 192 bits (24 bytes or 48 HEX characters).
             cdmipReceiveKey2 1.3.6.1.4.1.6247.4.2.7.12 displaystring read-write
Triple DES (3xDES) Receive Decrypt Key #2. The key length is 192 bits (24 bytes or 48 HEX characters).
             cdmipReceiveKey3 1.3.6.1.4.1.6247.4.2.7.13 displaystring read-write
Triple DES (3xDES) Receive Decrypt Key #3. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipReceiveKey4 1.3.6.1.4.1.6247.4.2.7.14 displaystring read-write
Triple DES (3xDES) Receive Decrypt Key #4. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipReceiveKey5 1.3.6.1.4.1.6247.4.2.7.15 displaystring read-write
Triple DES (3xDES) Receive Decrypt Key #5. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipReceiveKey6 1.3.6.1.4.1.6247.4.2.7.16 displaystring read-write
Triple DES (3xDES) Receive Decrypt Key #6. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipReceiveKey7 1.3.6.1.4.1.6247.4.2.7.17 displaystring read-write
Triple DES (3xDES) Receive Decrypt Key #7. The key length is 192 bits (24 Bytes or 48 HEX characters).
             cdmipReceiveKey8 1.3.6.1.4.1.6247.4.2.7.18 displaystring read-write
Triple DES (3xDES) Receive Decrypt Key #8. The key length is 192 bits (24 Bytes or 48 HEX characters).
         cdmipSmtp 1.3.6.1.4.1.6247.4.2.8
             cdmipSmtpServerIpAddress 1.3.6.1.4.1.6247.4.2.8.1 ipaddress read-write
IP address of the SMTP server on your local LAN.
             cdmipSmtpDomain 1.3.6.1.4.1.6247.4.2.8.2 displaystring read-write
SMTP Domain (i.e. comtechefdata.com)
             cdmipSmtpDestinationName 1.3.6.1.4.1.6247.4.2.8.3 displaystring read-write
SMTP Destination Email User Name (i.e. cdmipsupport)
         cdmipSnmp 1.3.6.1.4.1.6247.4.2.9
             cdmipSnmpTrapDestinationIpAddress 1.3.6.1.4.1.6247.4.2.9.1 ipaddress read-write
SNMP Trap Destination #1: The primary IP Address to which trap will be sent.
             cdmipSnmpTrapCommunity 1.3.6.1.4.1.6247.4.2.9.2 displaystring read-write
The trap community string to be used for SNMP trap messages.
             cdmipSnmpTrapVersion 1.3.6.1.4.1.6247.4.2.9.3 integer read-write
The SNMP Trap Version: Use V1 for SNMP Version 1 Traps. Use V2 for SNMP Version 2 Notifications. Enumeration: 'snmpV1': 1, 'snmpV2': 2.
             cdmipSnmpAuthenticationFailureCommunity 1.3.6.1.4.1.6247.4.2.9.4 displaystring no-access
NOTE: Used ONLY in the Authentification Failure Trap (No access). The community string which was invalid for a SET or GET SNMP message.
             cdmipSnmpAuthenticationFailureAddress 1.3.6.1.4.1.6247.4.2.9.5 ipaddress no-access
NOTE: Used ONLY in the Authentification Failure Trap (No access). IP Address which sent an SNMP message with an invalid SET or GET community string.
             cdmipSnmpTrapDestinationIpAddress2 1.3.6.1.4.1.6247.4.2.9.6 ipaddress read-write
SNMP Trap Destination #2: The secondary IP Address to which traps will be sent.
         cdmipWorkingMode 1.3.6.1.4.1.6247.4.2.10 integer read-write
Configure the IP Card's working mode. The CDM-IP can operate in any of these modes. 1. Router - Small Network Mode: The system functions as router and uses the route table to determine how to forward packets in a small network HDLC address mode. The HDLC packet uses a 1 byte HDLC address. The valid values are from 1 to 254 (0x1 - 0xFE). 2. Router - Large Network Mode: The system functions as router and uses the route table to determine how to forward packets in a large network HDLC address mode. The HDLC packet uses a 2- byte HDLC address. The valid values are from 1 to 32766 (0x1 - 0x7FFE). 3. Router - Point to Point - The system functions as router and uses the route table to determine how to forward packets in a point-to-point HDLC address mode. The HDLC packet does not use a HDLC address. 4. Router - Vipersat Mode - The system functions in Vipersat mode. 5. EasyConnect mode - The system forwards all packets it receives. The HDLC packet does not use a HDLC address. *** IMPORTANT NOTE *** Changing Working mode requires the system to reboot. System configuration is saved before rebooting. Please make sure you are setting the correct value. Enumeration: 'routerVipersatMode': 4, 'routerPointToPointMode': 3, 'easyConnectMode': 5, 'routerSmallNetworkMode': 1, 'routerLargeNetworkMode': 2.
         cdmipEasyconnectMulticastOption 1.3.6.1.4.1.6247.4.2.11 enabledisable read-write
Enable/Disable the Easyconnect multicast option. Enabling this option allows the modem working in EasyConnect operation to pass multicast traffic.
         cdmipHdrcompRefreshRateUdpRtp1 1.3.6.1.4.1.6247.4.2.12 integer read-write
Header compression Refresh Rate for UDP/RTP1. Valid range is 1 - 600 packets per full IP/UDP/RTP Header.
         cdmipHdrcompRefreshRateUdp 1.3.6.1.4.1.6247.4.2.13 integer read-write
Header Compression Refresh Rate for UDP. Valid range is 1 - 600 packets per full IP/UDP Header.
         cdmipHdrcompRefreshRateAllOther 1.3.6.1.4.1.6247.4.2.14 integer read-write
Header Compression Refresh Rate for all other protocols. Valid range is 1 - 600 packet per full IP Header.
         cdmipPayloadCompRefreshRate 1.3.6.1.4.1.6247.4.2.15 integer read-write
Refresh rate for Payload Compression in packets. Valid range is 1 = 600 packets before a refresh ofthe payload compression algorithm is done.
     cdmipInterfaces 1.3.6.1.4.1.6247.4.3
         cdmipEthernetInterface 1.3.6.1.4.1.6247.4.3.1
             cdmipEthernetMacAddress 1.3.6.1.4.1.6247.4.3.1.1 displaystring read-only
The MAC address for the Ethernet interface.
             cdmipEthernetSpeed 1.3.6.1.4.1.6247.4.3.1.2 integer read-write
The speed and mode of the Ehternet interface: The valid settings are: 1. Automatic. 2. 10 Mbps - Half Duplex. 3. 100 Mpbs - Half Duplex. 4. 10 Mbps - Full Duplex. 5. 100 Mbps - Full Duplex. Enumeration: 'auto': 1, 'fullDuplex10M': 4, 'fullDuplex100M': 5, 'halfDuplex10M': 2, 'halfDuplex100M': 3.
             cdmipEthernetIpAddress 1.3.6.1.4.1.6247.4.3.1.3 ipaddress read-write
The IP address for the Ethernet interface.
             cdmipEthernetSubnetPrefixLen 1.3.6.1.4.1.6247.4.3.1.4 integer read-write
The subnet mask prefix length for the Ethernet interface.
         cdmipSatelliteInterface 1.3.6.1.4.1.6247.4.3.2
             cdmipSatelliteHdlcAddress1 1.3.6.1.4.1.6247.4.3.2.5 integer read-write
HDLC Channel Address #1 filtered by the HSR Valid values of HDLC address depends on the Network mode. In Small Network Mode - Frame will have 1 Byte of HDLC addr. valid values are 1 - 254. (0x1 - 0xFE) In Large Network Mode - Frame will have 2 Bytes of HDLC address. valid values are 1 - 32766 (0x1 - 0x7FFE) In Point-to-Point Mode - HDLC addresses are NOT-USED. An HDLC Address of '0(Zero)' is interpretted as NOT-DEFINED or NOT-USED An HDLC address cannot have 0x00 or 0xFF in least Significant Byte. i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. User is NOT allowed to configure HDLC address while system is operating in EASY CONNECT MODE. To Invalidate/Delete HDLC Address, set the MIB member 'cdmipSatelliteHdlcAddressDelete' to the HDLC address number. HDLC Address number range from 1...4
             cdmipSatelliteHdlcAddress2 1.3.6.1.4.1.6247.4.3.2.6 integer read-write
HDLC Channel Address #2 filtered by the HSR Valid values of HDLC address depends on the Network mode. In Small Network Mode - Frame will have 1 Byte of HDLC addr. valid values are 1 - 254. (0x1 - 0xFE) In Large Network Mode - Frame will have 2 Bytes of HDLC address. valid values are 1 - 32766 (0x1 - 0x7FFE) In Point-to-Point Mode - HDLC addresses are NOT-USED. An HDLC Address of '0(Zero)' is interpretted as NOT-DEFINED or NOT-USED An HDLC address cannot have 0x00 or 0xFF in least Significant Byte. i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. User is NOT allowed to configure HDLC address while system is operating in EASY CONNECT MODE. To Invalidate/Delete HDLC Address, set the MIB member 'cdmipSatelliteHdlcAddressDelete' to the HDLC address number. HDLC Address number range from 1...4
             cdmipSatelliteHdlcAddress3 1.3.6.1.4.1.6247.4.3.2.7 integer read-write
HDLC Channel Address #3 filtered by the HSR Valid values of HDLC address depends on the Network mode. In Small Network Mode - Frame will have 1 Byte of HDLC addr. valid values are 1 - 254. (0x1 - 0xFE) In Large Network Mode - Frame will have 2 Bytes of HDLC address. valid values are 1 - 32766 (0x1 - 0x7FFE) In Point-to-Point Mode - HDLC addresses are NOT-USED. An HDLC Address of '0(Zero)' is interpretted as NOT-DEFINED or NOT-USED An HDLC address cannot have 0x00 or 0xFF in least Significant Byte. i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. User is NOT allowed to configure HDLC address while system is operating in EASY CONNECT MODE. To Invalidate/Delete HDLC Address, set the MIB member 'cdmipSatelliteHdlcAddressDelete' to the HDLC address number. HDLC Address number range from 1...4
             cdmipSatelliteHdlcAddress4 1.3.6.1.4.1.6247.4.3.2.8 integer read-write
HDLC Channel Address #4 filtered by the HSR Valid values of HDLC address depends on the Network mode. In Small Network Mode - Frame will have 1 Byte of HDLC addr. valid values are 1 - 254. (0x1 - 0xFE) In Large Network Mode - Frame will have 2 Bytes of HDLC address. valid values are 1 - 32766 (0x1 - 0x7FFE) In Point-to-Point Mode - HDLC addresses are NOT-USED. An HDLC Address of '0(Zero)' is interpretted as NOT-DEFINED or NOT-USED An HDLC address cannot have 0x00 or 0xFF in least Significant Byte. i.e., 0x400 or 0x6ff or 0x11ff are NOT valid HDLC addresses. User is NOT allowed to configure HDLC address while system is operating in EASY CONNECT MODE. To Invalidate/Delete HDLC Address, set the MIB member 'cdmipSatelliteHdlcAddressDelete' to the HDLC address number. HDLC Address number range from 1...4
             cdmipSatelliteHdlcAddressDelete 1.3.6.1.4.1.6247.4.3.2.9 integer read-write
Used to delete a specified HDLC Address. Setting this entry to value 1...4 deletes/invalidates the corresponding HDLC Address. 1. for HDLCAddress #1 2. for HDLCAddress #2 3. for HDLCAddress #3 4. for HDLCAddress #4 When a HDLC Address is deleted/invalidated, it is displayed as '0' (NOT-DEFINED or NOT-USED) on SNMP Gets.
             cdmipSatelliteHdlcAddressModeConfig 1.3.6.1.4.1.6247.4.3.2.10 integer read-only
The size of HDLC address used for frames sent over the satellite interface can range from 0 - 2 bytes. This range allows the system to operate in one of these modes: 1. Small Network Mode - The frame will have 1 byte of HDLC address. Valid values are 1 - 254. (0x1 - 0xFE). 2. Large Network Mode - The frame will have 2 bytes of HDLC address. Valid values are 1 - 32767 (0x1 - 0x7FFE). 3. Point-to-Point Mode - The frame does not use any HDLC address. 4. Vipersat Mode - The frame does not use any HDLC address. Enumeration: 'smallNetworkMode': 1, 'largeNetworkMode': 2, 'pointToPointMode': 3, 'vipersatMode': 4.
     cdmipRouteTable 1.3.6.1.4.1.6247.4.4
         cdmipIpRouteTable 1.3.6.1.4.1.6247.4.4.3 no-access
CDMIP IP Route Table
             cdmipIpRouteEntry 1.3.6.1.4.1.6247.4.4.3.1 no-access
CDMIP IP Route Entry
                 cdmipIpRouteIndex 1.3.6.1.4.1.6247.4.4.3.1.1 integer read-write
The index for the route table.
                 cdmipIpRouteName 1.3.6.1.4.1.6247.4.4.3.1.2 displaystring read-write
The name for the route. The route name must be unique.
                 cdmipIpRouteDestAddress 1.3.6.1.4.1.6247.4.4.3.1.3 ipaddress read-write
The destination IP address for the route. ***Note***: Do not add multicast routes for Vipersat Multicast addresses.
                 cdmipIpRouteDestMaskLen 1.3.6.1.4.1.6247.4.4.3.1.4 integer read-write
The number of bits in the subnet mask for the destination IP address for the route.
                 cdmipIpRouteNextHopAddress 1.3.6.1.4.1.6247.4.4.3.1.5 ipaddress read-write
The Next Hop IP Address is valid only for routes destined to the Ethernet interface. This IP address must be a locally attached router. Set 'cdmipIpRouteState' to 'toEthernet' state before setting 'cdmipIpRouteNextHopAddress'.
                 cdmipIpRouteMulticastOptions 1.3.6.1.4.1.6247.4.4.3.1.6 integer read-write
Configures how router should handle multicast traffic. Valid options are: 1. Do not forward any multicast traffic (drop all). 2. Forward multicast traffic from Ethernet to Satellite only. 3. Forward multicast traffic from Satellite to Ethernet only. 4. Forward multicast traffic in both directions. Enumeration: 'satToEthRouting': 3, 'ethToSatRouting': 2, 'noRouting': 1, 'satToEthAndEthToSatRouting': 4.
                 cdmipIpRouteState 1.3.6.1.4.1.6247.4.4.3.1.7 integer read-write
The route state specifies the route's destination. The valid values are: 1. To Ethernet (route goes to Ethernet interface). 2. To Satellite (route goes to Satellite interface). Enumeration: 'toSatellite': 1, 'toEthernet': 2.
                 cdmipIpRouteHdlcAddress 1.3.6.1.4.1.6247.4.4.3.1.8 integer read-write
The HDLC Address is valid only for routes destined to the Satellite interface. This can also be viewed as the 'next-hop' identifier for the route destined to satellite. The valid range of HDLC Address depends on Network mode. 1. Small Network mode - 1 - 254 (0x01 - 0xFE) 2. Large Network Mode - 1 - 32766 (0x01 - 0x7FFE) An HDLC Address cannot have 0x00 or 0xFF in Least Significant Byte (LSB). Set 'cdmipIpRouteState' to 'toSatellite' state before setting 'cdmipIpRouteHdlcAddress'.
                 cdmipIpRouteHdrComp 1.3.6.1.4.1.6247.4.4.3.1.9 enabledisable read-write
Enable or disable IP header compression on this route. To Set this parameter, you need to have Header Compression Feature available on your modem. It may return 'commit_failed' if feature is not available on modem.
                 cdmipIpRoutePayloadComp 1.3.6.1.4.1.6247.4.4.3.1.10 enabledisable read-write
Enable or disable payload compression on this route. To set this parameter, you need to have Datagram/Payload Compression feature available on your modem. It may return 'commit_failed' if feature is not available on modem.
                 cdmipIpRoute3xDes 1.3.6.1.4.1.6247.4.4.3.1.11 enabledisable read-write
Enable or disable 3xDES [Triple DES Encryption] on this route. It may return 'commit_failed' if 3xDES feature is not available on modem.
                 cdmipIpRouteDesKey 1.3.6.1.4.1.6247.4.4.3.1.12 integer read-write
Pick which DES key to use for this route. The system supports 8 3xDES (Triple DES - 24 Byte Length) keys. This specifies the 3xDES key to be used for this flow. 1 - 8 for Key1 to Key8 9 - Randomly pick one of the 8 keys. 10 - Clear Enumeration: 'key8': 8, 'key3': 3, 'key2': 2, 'key1': 1, 'random': 9, 'key7': 7, 'key6': 6, 'key5': 5, 'key4': 4, 'clear': 10.
                 cdmipIpRouteRowStatus 1.3.6.1.4.1.6247.4.4.3.1.13 integer read-write
In SMIv2 tables, the RowStatus textual convention is used to manage the creation and deletion of conceptual rows. This column has six defined values. active(1) - which indicates that the conceptual row with all column is available for use by the managed device notInService(2) - this row state is not yet supported notReady(3) - this row state is not yet supported createAndGo(4) - which is supplied by a manager wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. createAndWait(5) - this row create is not yet supported destroy(6) - which is supplied by a manager wishing to delete all of the instances associated with an existing conceptual row. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
     cdmipProtocols 1.3.6.1.4.1.6247.4.5
         cdmipIgmpConfig 1.3.6.1.4.1.6247.4.5.1
             cdmipIgmpTable 1.3.6.1.4.1.6247.4.5.1.1 no-access
IGMP Table
                 cdmipIgmpEntry 1.3.6.1.4.1.6247.4.5.1.1.1 no-access
IGMP Entry
                     cdmipIgmpIndex 1.3.6.1.4.1.6247.4.5.1.1.1.1 integer read-only
The index for the IGMP table.
                     cdmipIgmpTTL 1.3.6.1.4.1.6247.4.5.1.1.1.2 integer read-only
The IGMP Time to live (TTL) for the multicast group.
                     cdmipIgmpClientState 1.3.6.1.4.1.6247.4.5.1.1.1.3 integer read-only
The current state of the multicast group. Possible states are: 1. Idle. 2. Active. 3. Closing. Enumeration: 'active': 2, 'idle': 1, 'closing': 3.
                     cdmipIgmpSrc 1.3.6.1.4.1.6247.4.5.1.1.1.4 integer read-only
Show which interface the multicast group is coming from. Possible values are: 1. Other - from the Ethernet interface. 2. Sat - from the Satellite interface. Enumeration: 'other': 1, 'sat': 2.
                     cdmipIgmpGroupIpAddress 1.3.6.1.4.1.6247.4.5.1.1.1.5 ipaddress read-only
The multicast address for the IGMP group.
             cdmipIgmpReceiver 1.3.6.1.4.1.6247.4.5.1.2
                 cdmipIgmpEnable 1.3.6.1.4.1.6247.4.5.1.2.1 enabledisable read-only
Enable or disable IGMP. 1. IGMP is enabled. 2. IGMP is disabled.
                 cdmipIgmpQueryPeriod 1.3.6.1.4.1.6247.4.5.1.2.2 integer read-write
Modem as IGMP Server: IGMP query period in seconds.
                 cdmipIgmpMaxRespTime 1.3.6.1.4.1.6247.4.5.1.2.3 integer read-write
Modem as Sever: IGMP max. response time in seconds.
                 cdmipIgmpMaxMissBeforeDrop 1.3.6.1.4.1.6247.4.5.1.2.4 integer read-write
Modem as Server: Number of missed responses before leaving an IGMP group.
             cdmipIgmpTransmiter 1.3.6.1.4.1.6247.4.5.1.3
                 cdmipIgmpRecognizeQueries 1.3.6.1.4.1.6247.4.5.1.3.1 enabledisable read-write
Modem as Client: Recognize IGMP Queries
                 cdmipIgmpVersionUnsolicitedReports 1.3.6.1.4.1.6247.4.5.1.3.2 integer read-write
Modem as Client: IGMP Version used for Unsolicited Reports. Possible values are: 1. Version 1. 2. Version 2. Enumeration: 'v1': 1, 'v2': 2.
                 cdmipIgmpForceAlertOption 1.3.6.1.4.1.6247.4.5.1.3.3 enabledisable read-write
Modem as Client: Router Alert Option for V1 report.
                 cdmipIgmpUnsolicitedReportInterval 1.3.6.1.4.1.6247.4.5.1.3.4 integer read-write
Modem as Client: Unsolicited Report Interval in seconds.
         cdmipDhcpRelayConfig 1.3.6.1.4.1.6247.4.5.2
             cdmipDhcpServerIpAddress 1.3.6.1.4.1.6247.4.5.2.1 ipaddress read-write
The IP address of the DHCP Server.
     cdmipRedundancy 1.3.6.1.4.1.6247.4.6
         cdmipCurrentRedundantState 1.3.6.1.4.1.6247.4.6.1 integer read-only
The redundancy state of the modem. 1. OnLine - actively passing IP traffic. 0. OffLine - in standby mode; no IP traffic. Enumeration: 'offLine': 0, 'onLine': 1.
         cdmipLocalUnitManagementIpAddress 1.3.6.1.4.1.6247.4.6.2 ipaddress read-only
The IP Address for management of the IP parameters (READ ONLY). *** NOTE: This address is the same as the Ethernet IP address. ***
         cdmipRedundantUnitManagementIpAddress 1.3.6.1.4.1.6247.4.6.3 ipaddress read-only
The IP Address of the redundant unit (READ ONLY). *** NOTE: This address is the same as other unit's Ethernet IP address. ***
         cdmipRedundantTrafficIpAddress 1.3.6.1.4.1.6247.4.6.4 ipaddress read-write
The IP address for traffic passing through the redundant pair of modem. This address is only active in the ONLINE modem. *** NOTE: The traffic IP can only be set on the ONLINE unit. ***
         cdmipRedundantTrafficSubnetMaskLen 1.3.6.1.4.1.6247.4.6.5 integer read-write
The subnet mask prefix length for the traffic IP address. *** NOTE: The traffic IP subnet mask can only be set on the ONLINE unit. ***
         cdmipForceUnitOffline 1.3.6.1.4.1.6247.4.6.6 integer read-write
The allows the user to force a modem into standby mode. When a 'force' is executed the ONLINE unit goes to standby mode. Also, the OFFLINE unit now becomes active. *** NOTE: A 'force' can only be executed on the ONLINE unit. *** Enumeration: 'force': 1.
     cdmipOperMaint 1.3.6.1.4.1.6247.4.7
         cdmipAppVersion 1.3.6.1.4.1.6247.4.7.1 displaystring read-only
Displays the version information for the application image and FPGA images.
         cdmipSaveConfiguration 1.3.6.1.4.1.6247.4.7.2 integer read-write
Setting this value to '1' will save the PARAM permanent storage. Only value: 1. Save - save the PARAM to permanent storage. Enumeration: 'save': 1.
         cdmipReset 1.3.6.1.4.1.6247.4.7.3 integer read-write
Setting this value to '1' will reboot the IP card. Only value: 1. Rest - reboot the IP card. Enumeration: 'reset': 1.
         cdmipRestoreFactoryDefaults 1.3.6.1.4.1.6247.4.7.5 integer read-write
Setting this value to '1' will restore factory defaults to the system. Only value: 1. Restore - restore factory defaults. *** NOTE: Restoring factory defaults will erase PARAM in permanent storage. Make sure, before setting this to True. *** Enumeration: 'restore': 1.
         cdmipLoadParamsFromStorage 1.3.6.1.4.1.6247.4.7.6 integer read-write
Setting the value to '1' will load the PARAM from the permanent storage. Only value: 1. Load - load PARAM from permanent storage. Enumeration: 'load': 1.
         cdmipIPModuleBootFrom 1.3.6.1.4.1.6247.4.7.7 integer read-write
Setting this parameter lets the IP Module to boot from a specified image. 0. Latest - boots with the image that has the latest timestamp (date and time). 1. Image 1 - boots with the image stored in Image 1. 2. Image 2 - boots with the image stored in Image 2. Enumeration: 'image2': 2, 'image1': 1, 'latest': 0.
         cdmipUpgradeTo 1.3.6.1.4.1.6247.4.7.8 integer read-write
Setting this parameter specifies Image to overwrite with the new upgraded image. 0. Oldest - Saves the new upgrade image over the image that has the oldest timestamp (date and time). 1. Image1 - Saves the new upgrade image into Image #1. 2. Image2 - Saves the new upgrade image into Image #2. *** NOTE: This parameter must be set before performing an upgrade. *** Enumeration: 'image2': 2, 'image1': 1, 'oldest': 0.
         cdmipParamConfig 1.3.6.1.4.1.6247.4.7.9 integer read-write
Setting this parameter tells how the IP card will get its configuration data when booting up: Configuration data can be loaded from the following locations: 1. Factory Defaultls - load data from factory defaults. 2. PARAM File - load data from PARAM in permanent storage. Enumeration: 'paramFile': 2, 'factoryDefaults': 1.
         cdmipUnitInformation 1.3.6.1.4.1.6247.4.7.10
               cdmipBootImageInfo 1.3.6.1.4.1.6247.4.7.10.1 displaystring read-only
Displays version information for bootrom image.
               cdmipAppImage1Info 1.3.6.1.4.1.6247.4.7.10.2 displaystring read-only
Displays version information for application image in slot #1.
               cdmipAppImage2Info 1.3.6.1.4.1.6247.4.7.10.3 displaystring read-only
Displays version information for application image in slot #2.
               cdmipFramerVersion 1.3.6.1.4.1.6247.4.7.10.4 integer read-only
Displays version information for framer installed in the IP card. Enumeration: 'framer2': 2, 'framer1': 1.
         cdmipBaseModemBootFrom 1.3.6.1.4.1.6247.4.7.11 integer read-write
Setting this parameter lets the Base Modem boot from a specified image. 0. Latest - boots with the Base Modem image that has the latest timestamp (date and time). 1. Image 1 - boots with the Base Modem image stored in Image 1. 2. Image 2 - boots with the Base Modem image stored in Image 2. Enumeration: 'image2': 2, 'image1': 1, 'latest': 0.
     cdmipStatistics 1.3.6.1.4.1.6247.4.8
         cdmipEthernetStatistics 1.3.6.1.4.1.6247.4.8.1
             cdmipEtherTransmitGoodFrames 1.3.6.1.4.1.6247.4.8.1.1 counter32 read-only
The number of transmitted good frames from the Ethernet interface.
             cdmipEtherTransmitMaxCollisionCount 1.3.6.1.4.1.6247.4.8.1.2 counter32 read-only
The number of frames that were NOT transmitted because they encountered maximum configured collisions. This counter should only increment when network is heavily saturated with traffic.
             cdmipEtherTransmitLateCollisionCount 1.3.6.1.4.1.6247.4.8.1.3 counter32 read-only
The number of frames that were NOT transmitted because they encountered a collision outside the normal collision window.
             cdmipEtherTransmitDMAUnderrunCount 1.3.6.1.4.1.6247.4.8.1.4 counter32 read-only
The number of frames that were either NOT transmitted OR retransmitted due to transmit DMA underrun. Underruns occur due to lack of PCI bandwidth resulting in the internal transmit FIFO running dry during the transmission of a frame.
             cdmipEtherTransmitLostCarrierSenseCount 1.3.6.1.4.1.6247.4.8.1.5 counter32 read-only
The number of frames transmitted by the device despite the fact that it detected the de-assertion of Transmit Lost Carrier Sense (CRS) during the transmission.
             cdmipEtherTransmitDeferredCount 1.3.6.1.4.1.6247.4.8.1.6 counter32 read-only
The number of frames deferred before transmission due to activity on the link.
             cdmipEtherTransmitSingleCollisionCount 1.3.6.1.4.1.6247.4.8.1.7 counter32 read-only
The number of transmitted frames that encountered only one collision.
             cdmipEtherTransmitMultipleCollisionCount 1.3.6.1.4.1.6247.4.8.1.8 counter32 read-only
The number of transmitted frames that encountered more than one collision.
             cdmipEtherTransmitTotalCollisionCount 1.3.6.1.4.1.6247.4.8.1.9 counter32 read-only
This counter contains the total number of collisions that were encountered while attempting to transmit. This count includes late collisions and collisions from frames that encountered maximum collisions.
             cdmipEtherReceiveGoodFrames 1.3.6.1.4.1.6247.4.8.1.10 counter32 read-only
The number of frames properly received from the link. It is updated only after actual reception from the link is completed and all data bytes are stored in memory.
             cdmipEtherReceiveCRCErrorFrameCount 1.3.6.1.4.1.6247.4.8.1.11 counter32 read-only
The number of aligned frames discarded due to a CRC error.
             cdmipEtherReceiveAllignErrorCount 1.3.6.1.4.1.6247.4.8.1.12 counter32 read-only
The number of frames that are both misaligned [in other words, CRS de-asserts on a non-octet boundary] and contain a CRC error.
             cdmipEtherReceiveResourceErrorCount 1.3.6.1.4.1.6247.4.8.1.13 counter32 read-only
The number of good frames discarded to unavailable resources.
             cdmipEtherReceiveFifoOverrunErrorCount 1.3.6.1.4.1.6247.4.8.1.14 counter32 read-only
The number of frames known to be lost because the internal receive FIFO overflowed [also known as receive overrun]. This can occur if the device is unable to get necessary PCI bandwidth. If the overflow condition persists for more than one frame, the frames that follow the first can also be lost. A frame that was counted as an overrun will not be counted in other error counters, like short frames, misaligned, or CRC error.
             cdmipEtherReceiveCollisionDetectErrorCount 1.3.6.1.4.1.6247.4.8.1.15 counter32 read-only
The number of frames that encountered a collision during reception. This counter is always zero on the 82559 Ethernet chip.
             cdmipEtherReceiveShortFrameCount 1.3.6.1.4.1.6247.4.8.1.16 counter32 read-only
The number of received frames that are shorter than the minimum frame length.
             cdmipEtherTransmitFlowControlPauseFrames 1.3.6.1.4.1.6247.4.8.1.17 counter32 read-only
The number of flow control frames transmitted by the device. This count includes both the XOFF and XON frames transmitted by the device.
             cdmipEtherReceiveFlowControlPauseFrames 1.3.6.1.4.1.6247.4.8.1.18 counter32 read-only
The number of flow control frames received by the device. This count includes both XOFF and XON frames received.
             cdmipEtherResetCounters 1.3.6.1.4.1.6247.4.8.1.19 integer read-write
Setting this parameter to '1' will reset all Ethernet transmit and receive counters. Enumeration: 'reset': 1.
         cdmipIpRoutingStatistics 1.3.6.1.4.1.6247.4.8.3
             cdmipTotalIpPacketsFromSatellite 1.3.6.1.4.1.6247.4.8.3.1 counter32 read-only
The total number of IP packets received from the Satellite interface.
             cdmipTotalIpPacketsRoutedToSatellite 1.3.6.1.4.1.6247.4.8.3.2 counter32 read-only
The total number of IP packets sent to the Satellite interface.
             cdmipTotalIpPacketsFromEthernet 1.3.6.1.4.1.6247.4.8.3.3 counter32 read-only
The total number of IP packets received from the Ethernet interface.
             cdmipTotalIpPacketsRoutedToEthernet 1.3.6.1.4.1.6247.4.8.3.4 counter32 read-only
The total number of IP packets sent to the Ethernet interface.
             cdmipIgmpPacketsReceived 1.3.6.1.4.1.6247.4.8.3.10 counter32 read-only
The total number of multicast IGMP packets received from any interface.
             cdmipIpOptionPacketsReceived 1.3.6.1.4.1.6247.4.8.3.11 counter32 read-only
The total number of packets received with IP options in the header.
             cdmipDroppedPacketsTotal 1.3.6.1.4.1.6247.4.8.3.12 counter32 read-only
The total number of packets dropped for any reason.
             cdmipDroppedPacketsTTLExpired 1.3.6.1.4.1.6247.4.8.3.13 counter32 read-only
The total number of packets dropped because TTL (time to live) expired.
             cdmipDroppedPacketsBadIpHeader 1.3.6.1.4.1.6247.4.8.3.14 counter32 read-only
The total number of packets dropped because of a bad IP header checksum.
             cdmipDroppedPacketsNoRoute 1.3.6.1.4.1.6247.4.8.3.15 counter32 read-only
The total number of packets dropped because of no route.
             cdmipDroppedPacketsMulticast 1.3.6.1.4.1.6247.4.8.3.16 counter32 read-only
The number of multicast packets dropped because of 'Satellite to Ethernet Option' is disabled.
             cdmipDroppedPacketsFiltered 1.3.6.1.4.1.6247.4.8.3.17 counter32 read-only
The number of packets dropped because of a software decision.
             cdmipDroppedPacketsMulticastDisableGroup 1.3.6.1.4.1.6247.4.8.3.18 counter32 read-only
The number of multicast packets dropped because the IGMP multicast group is disabled.
             cdmipDroppedPacketsNoArpEntry 1.3.6.1.4.1.6247.4.8.3.19 counter32 read-only
The number of packets dropped because there is no ARP entry in the ARP table.
             cdmipDroppedPacketsBadBufferLength 1.3.6.1.4.1.6247.4.8.3.20 counter32 read-only
The number of packets dropped because of a bad buffer length.
             cdmipDroppedPacketsBadIpVersion 1.3.6.1.4.1.6247.4.8.3.21 counter32 read-only
The number of packets dropped because of an unsupported IP version (i.e. V6).
             cdmipDroppedPacketsQosFilterRule 1.3.6.1.4.1.6247.4.8.3.22 counter32 read-only
The number of packets filtered because of the 'Filter' flag on a QoS rule.
             cdmipDroppedPacketsEasyConnectMulticastOption 1.3.6.1.4.1.6247.4.8.3.23 counter32 read-only
The number of multicast packets dropped in EasyConnect mode because the Multicast Option is disabled.
             cdmipDroppedPacketsRouterQueueFull 1.3.6.1.4.1.6247.4.8.3.24 counter32 read-only
The total number of packets dropped because router queue is full.
             cdmipResetCounters 1.3.6.1.4.1.6247.4.8.3.26 integer read-write
Setting this parameter to '1' will clear all IP routing, WAN, and Ethernet statistics. Enumeration: 'reset': 1.
         cdmipQosStatistics 1.3.6.1.4.1.6247.4.8.4
             cdmipQosStatisticsTable 1.3.6.1.4.1.6247.4.8.4.1 no-access
Description.
                 cdmipQosStatisticsEntry 1.3.6.1.4.1.6247.4.8.4.1.1 no-access
Description.
                     cdmipQosStatsQueueIndex 1.3.6.1.4.1.6247.4.8.4.1.1.1 integer read-only
The index of the QoS rule for which stats are being displayed.
                     cdmipQosStatsSentPackets 1.3.6.1.4.1.6247.4.8.4.1.1.2 counter32 read-only
The total number of packets sent through this QoS queue.
                     cdmipQosStatsSentPacketsPerSecond 1.3.6.1.4.1.6247.4.8.4.1.1.3 counter32 read-only
The number of packets per second sent through this QoS queue.
                     cdmipQosStatsSentBytes 1.3.6.1.4.1.6247.4.8.4.1.1.4 counter32 read-only
The total number of bytes sent through this QoS queue.
                     cdmipQosStatsDroppedPackets 1.3.6.1.4.1.6247.4.8.4.1.1.5 counter32 read-only
The total number of packets dropped from this QoS queue.
                     cdmipQosStatsDroppedBytes 1.3.6.1.4.1.6247.4.8.4.1.1.6 counter32 read-only
The total number of bytes dropped from this QoS queue.
                     cdmipQosStatsCurrentTxRate 1.3.6.1.4.1.6247.4.8.4.1.1.7 counter32 read-only
The current Tx data rate associated with this QoS queue.
                     cdmipQosStatsAverageTxRate 1.3.6.1.4.1.6247.4.8.4.1.1.8 counter32 read-only
The average Tx data rate associated with this QoS queue.
                     cdmipQosStatsMaxTxRate 1.3.6.1.4.1.6247.4.8.4.1.1.9 counter32 read-only
The maximum Tx data rate associated with this QoS queue.
                     cdmipQosStatsActiveFlows 1.3.6.1.4.1.6247.4.8.4.1.1.10 counter32 read-only
The number of active flows associated with this QoS queue.
                     cdmipQosStatsResetCounters 1.3.6.1.4.1.6247.4.8.4.1.1.11 integer read-write
Setting this to '1' will reset all the statistics counters associated with this QoS queue. Enumeration: 'reset': 1.
         cdmipWanFpgaStatistics 1.3.6.1.4.1.6247.4.8.5
             cdmipWanFpgaRxBadAddrCount 1.3.6.1.4.1.6247.4.8.5.1 counter32 read-only
The number of received frames from the Satellite interface that do not match any of the HDLC addresses or the broadcast address. If 'frame bypass' is enabled, then non-matching frames are not counted as having a bad address.
             cdmipWanFpgaRxPktProcessorCrcErrorCount 1.3.6.1.4.1.6247.4.8.5.2 counter32 read-only
The number of received frames from the Satellite interface that failed the packet processor CRC check.
             cdmipWanFpgaRxAbortOctetErrorCount 1.3.6.1.4.1.6247.4.8.5.3 counter32 read-only
The number of the aborted frames from the Satellite interface plus the number of octet error frames. An octet error is when the received frame does not start on a byte boudary.
             cdmipWanFpgaRxOverrunErrorCount 1.3.6.1.4.1.6247.4.8.5.4 counter32 read-only
The number of received frames from the Satellite interface that exceeded a max. frame length of 2K bytes in length or overflowed the HDLC buffer.
             cdmipWanFpgaRxHdlcCrcErrorCount 1.3.6.1.4.1.6247.4.8.5.5 counter32 read-only
The number of received frames from the Satellite interface that failed the HDLC CRC check.
             cdmipWanFpgaRxHdlcPayLoadCount 1.3.6.1.4.1.6247.4.8.5.6 counter32 read-only
The count of payload bytes that were received over the Satellite interface, excluding any frame overhead.
             cdmipWanFpgaRxHdlcHeaderCount 1.3.6.1.4.1.6247.4.8.5.7 counter32 read-only
The count of HDLC header bytes received over the Satellite interface, including control, HDLC address, Flow ID, and CRC.
             cdmipWanFpgaRxHdlcPacketCount 1.3.6.1.4.1.6247.4.8.5.8 counter32 read-only
The number of frames received over the Satellite interface.
             cdmipWanFpgaTxHdlcHeaderCount 1.3.6.1.4.1.6247.4.8.5.9 counter32 read-only
The number of HDLC header bytes transmitted over the Satellite interface.
             cdmipWanFpgaTxHdlcPayLoadCount 1.3.6.1.4.1.6247.4.8.5.10 counter32 read-only
The number of payload bytes transmitted over the Satellite interface.
             cdmipWanFpgaTxHdlcPacketCount 1.3.6.1.4.1.6247.4.8.5.11 counter32 read-only
The number of packets transmitted over the Satellite interface.
             cdmipWanFpgaResetAllCounters 1.3.6.1.4.1.6247.4.8.5.12 integer read-write
Setting this variable to 'reset' will reset all the WAN FPGA Rx & Tx counters. Enumeration: 'reset': 1.
             cdmipWanFpgaWanUtilization 1.3.6.1.4.1.6247.4.8.5.13 integer read-only
The percentage (%) of Tx bandwidth that is being utilized.
             cdmipWanFpgaLanToWanTraffic 1.3.6.1.4.1.6247.4.8.5.14 integer read-only
The data rate (Kbps) before IP header and payload compression of Ethernet traffic destined for the Satellite interface.
             cdmipWanFpgaActualWanTraffic 1.3.6.1.4.1.6247.4.8.5.15 integer read-only
The 'compressed' data rate (Kbps) after IP header and payload compression of traffic transmitted on the Satellite interface.
             cdmipWanFpgaWanBandwidthSaved 1.3.6.1.4.1.6247.4.8.5.16 integer read-only
The percentage (%) of Satellite bandwidth saved because of IP header and payload compression.
         cdmipCompressionStatistics 1.3.6.1.4.1.6247.4.8.6
             cdmipCompressionStatisticsTable 1.3.6.1.4.1.6247.4.8.6.1 no-access
Description.
                 cdmipCompressionStatisticsEntry 1.3.6.1.4.1.6247.4.8.6.1.1 no-access
Description.
                     cdmipHdrcompStatsQueueIndex 1.3.6.1.4.1.6247.4.8.6.1.1.1 integer read-only
The index of the QoS queue for which the IP header compression stats are being displayed.
                     cdmipHdrcompStatsPreHdrcompBytes 1.3.6.1.4.1.6247.4.8.6.1.1.2 counter32 read-only
The total number of bytes in all packets before IP header compression has been performed.
                     cdmipHdrcompStatsPostHdrcompBytes 1.3.6.1.4.1.6247.4.8.6.1.1.3 counter32 read-only
The total number of bytes in all 'compressed' packets after IP header compression has been performed.
                     cdmipHdrcompRatio 1.3.6.1.4.1.6247.4.8.6.1.1.4 integer read-only
The percentage (%) of saving gained by performing IP header compression on all packets destined for the Satellite interface. The percentage is then multiplied by 100 to make it an integer.
                     cdmipPayloadCompPrePayloadCompBytes 1.3.6.1.4.1.6247.4.8.6.1.1.5 counter32 read-only
The total number of bytes in all packets before payload compression has been performed. To get the standard payload compression ratio in the form 1:x.xx (Pre Payload Compression Bytes) x.xx = ------------------------------- (Post Payload Compression Bytes)
                     cdmipPayloadCompPostPayloadCompBytes 1.3.6.1.4.1.6247.4.8.6.1.1.6 counter32 read-only
The total number of bytes in all packets after payload compression has been performed. To get the standard payload compression ratio in the form 1:x.xx (Pre Payload Compression Bytes) x.xx = ------------------------------- (Post Payload Compression Bytes)
                     cdmipPayloadCompRatio 1.3.6.1.4.1.6247.4.8.6.1.1.7 integer read-only
This parameter is the standard payload compression ratio. To get the standard payload compression ratio in the form 1:x.xx (Pre Payload Compression Bytes) x.xx = ------------------------------- (Post Payload Compression Bytes) The ratio is then converted into an integer by multiplying by 100.
                     cdmipCompStatsResetCounters 1.3.6.1.4.1.6247.4.8.6.1.1.8 integer read-write
Setting this to '1' will reset all IP header compression and payload compression stats counters. Enumeration: 'reset': 1.
     cdmipQosRules 1.3.6.1.4.1.6247.4.9
         cdmipQosRulesTable 1.3.6.1.4.1.6247.4.9.2 no-access
Description.
             cdmipQosRulesEntry 1.3.6.1.4.1.6247.4.9.2.1 no-access
Description.
                 cdmipQosRulesIndex 1.3.6.1.4.1.6247.4.9.2.1.1 integer read-write
The index for the QoS rule. The valid values are 1 - 32.
                 cdmipQosRulesSrcIpAddr 1.3.6.1.4.1.6247.4.9.2.1.2 ipaddress read-write
The source IP address for the QoS rule.
                 cdmipQosRulesSrcIpMaskLen 1.3.6.1.4.1.6247.4.9.2.1.3 integer read-write
The source IP subnet mask length for the QoS rule.
                 cdmipQosRulesDstIpAddr 1.3.6.1.4.1.6247.4.9.2.1.4 ipaddress read-write
The destination IP address for the QoS rule.
                 cdmipQosRulesDstIpMaskLen 1.3.6.1.4.1.6247.4.9.2.1.5 integer read-write
The destination IP subnet mask length for the QoS rule.
                 cdmipQosRulesProtocol 1.3.6.1.4.1.6247.4.9.2.1.6 integer read-write
The protocol type for the QoS rule. Only the default rule is configured with 'All'. Setting protocol field to 'All' for other rules is not permitted, may result in 'wrong value' Setting the protocol to Non-IP would configure the QoS rule parameters to pre-set default values. User is only allowed to set max bandwidth, priority & filter flag for a Non-IP qos rule. User is not allowed to create/modify a rule with RTP Signaling protocol. The software does this. IMPORTANT: Configure rtpSignal rule for rtpVoice/rtpVideo rules. Enumeration: 'ftp': 8, 'udp': 1, 'rtpVideo': 6, 'http': 9, 'telnet': 10, 'allIp': 17, 'snmp': 12, 'sql': 16, 'smtp': 11, 'all': 19, 'tcp': 2, 'sap': 13, 'rtpVoice': 5, 'rtp': 4, 'citrix': 15, 'oracle': 14, 'icmp': 3, 'nonIp': 18, 'rtpSignal': 7.
                 cdmipQosRulesSrcPortMin 1.3.6.1.4.1.6247.4.9.2.1.7 integer read-write
The starting UDP/TCP source port (minimum) for the QoS rule. A QoS rule can be configured with a port range of aaaa - bbbb by setting 'cdmipQosRulesSrcPortMin' to aaaa and 'cdmipQosRulesSrcPortMax' to bbbb. *** NOTE: Enter 65536 to match all ports. ***
                 cdmipQosRulesSrcPortMax 1.3.6.1.4.1.6247.4.9.2.1.8 integer read-write
The ending UDP/TCP source port (maximum) for the QoS rule. A QoS rule can be configured with a port range of aaaa - bbbb by setting 'cdmipQosRulesSrcPortMin' to aaaa and 'cdmipQosRulesSrcPortMax' to bbbb. *** NOTE: Enter 65536 to match all ports. ***
                 cdmipQosRulesDstPortMin 1.3.6.1.4.1.6247.4.9.2.1.9 integer read-write
The starting destination port number (minimum) for the QoS rule. A QoS rule can be configured with a port range of xxxx - yyyy by setting 'cdmipQosRulesDstPortMin' to xxxx and 'cdmipQosRulesDstPortMax' to yyyy. *** NOTE: Enter 65536 for match all ports. ***
                 cdmipQosRulesDstPortMax 1.3.6.1.4.1.6247.4.9.2.1.10 integer read-write
The ending destination port number (maximum) for the QoS rule. A QoS rule can be configured with a port range of xxxx - yyyy by setting 'cdmipQosRulesDstPortMin' to xxxx and 'cdmipQosRulesDstPortMax' to yyyy. *** NOTE: Enter 65536 for match all ports. ***
                 cdmipQosRulesMinBw 1.3.6.1.4.1.6247.4.9.2.1.11 integer read-write
The minimum bandwidth (Kbps) for the QoS rule. *** NOTE: Only valid for 'Minimum Bandwidth & Maximum Bandwidth' mode. ***
                 cdmipQosRulesMaxBw 1.3.6.1.4.1.6247.4.9.2.1.12 integer read-write
The maximum bandwidth (Kbps) for the QoS rule. *** NOTE: Valid for both 'Maximum Bandwidth & Priority' and 'Minimum Bandwidth & Maximum Bandwidth' modes. ***
                 cdmipQosRulesPriority 1.3.6.1.4.1.6247.4.9.2.1.13 integer read-write
The priority for the QoS rule. The valid values are: Priority 1 - Highest Priority 2, 3, 4, 5, 6, 7 - Middle Priority 8 - Lowest *** NOTE: Only valid for 'Maximum Bandwidth & Priority' mode. *** Enumeration: 'priority1': 1, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6, 'priority8': 8.
                 cdmipQosRulesWred 1.3.6.1.4.1.6247.4.9.2.1.14 enabledisable read-write
The WRED (Weighted Random Early Drop) option for the QoS rule. This is the mechanism by which packets are treated upon queue full. If this is enabled, the packets are dropped randomly upon detection of queue full or queue getting full.
                 cdmipQosRulesFilter 1.3.6.1.4.1.6247.4.9.2.1.15 enabledisable read-write
The filter option for the QoS rule. *** NOTE: This option will filter ALL packets associated with this QoS rule. ***
                 cdmipQosRulesRowStatus 1.3.6.1.4.1.6247.4.9.2.1.16 integer read-write
In SMIv2 tables, the RowStatus textual convention is used to manage the creation and deletion of conceptual rows. This column has six defined values. active(1) - which indicates that the conceptual row with all column is available for use by the managed device. notInService(2) - this row state is not yet supported. notReady(3) - this row state is not yet supported. createAndGo(4) - which is supplied by a manager wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. createAndWait(5) - this row create is not yet supported destroy(6) - which is supplied by a manager wishing to delete all of the instances associated with an existing conceptual row. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
         cdmipDiffServRulesTable 1.3.6.1.4.1.6247.4.9.3 no-access
Differential Services (DiffServ) Rules Table.
             cdmipDiffServRulesEntry 1.3.6.1.4.1.6247.4.9.3.1 no-access
Description.
                 cdmipDiffServRulesIndex 1.3.6.1.4.1.6247.4.9.3.1.1 integer read-write
The index for the DiffServ rule.
                 cdmipDiffServRulesClass 1.3.6.1.4.1.6247.4.9.3.1.2 octet string read-only
The DiffServ class name for the DiffServ rule. There are three types of DiffServ rules: 1. Expedite Forwarding 2. Class-1 to Class-8 3. Assured Forwarding-1 to Assured Forwarding-4 *** NOTE: This is NOT a user configurable parameter. ***
                 cdmipDiffServRulesDscp 1.3.6.1.4.1.6247.4.9.3.1.3 integer32 read-only
The DiffServ code point (DSCP) for the DiffServ rule. *** NOTE: This is NOT a user configurable parameter. ***
                 cdmipDiffServRulesMinBw 1.3.6.1.4.1.6247.4.9.3.1.4 integer read-write
The minimum bandwidth (Kbps) for the DiffServ rule. *** NOTE: This value can only be set for DiffServ rules of 'Assured Forwarding Class'. NOTE: The total minimum bandwidth of all rules should NOT exceed the Tx data rate of the modem. ***
                 cdmipDiffServRulesMaxBw 1.3.6.1.4.1.6247.4.9.3.1.5 integer read-write
The maximum bandwidth (Kbps) for the DiffServ rule. *** NOTE: This value can only be set for DiffServ rules of 'Assured Forwarding Class'. ***
                 cdmipDiffServRulesPriority 1.3.6.1.4.1.6247.4.9.3.1.6 integer read-only
The priority of the DiffServ rule. *** NOTE: This is NOT a user configurable parameter. ***
                 cdmipDiffServRulesRowStatus 1.3.6.1.4.1.6247.4.9.3.1.9 integer read-write
In SMIv2 tables, the RowStatus textual convention is used to manage the creation and deletion of conceptual rows. This column has six defined values. active(1) - which indicates that the conceptual row with all column is available for use by the managed device notInService(2) - this row state is not yet supported notReady(3) - this row state is not yet supported createAndGo(4) - which is supplied by a manager wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device. createAndWait(5) - this row create is not yet supported destroy(6) - which is supplied by a manager wishing to delete all of the instances associated with an existing conceptual row. Right now, the diffserv initialisation process creates all necessary Diffserv rules. User is allowed to modify minBw & maxBw for ASF (Assured Forwarding) class rules only. User is not allowed to create new rules. Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
         cdmipQosMode 1.3.6.1.4.1.6247.4.9.4 integer read-write
The QoS configuration modes for the QoS subsystem. The valid values are: 1. Maximum Bandwidth & Priority. 2. Minimum Bandwidth & Maximum Bandwidth. 3. Differential Services Mode. Enumeration: 'qosModeDiffServ': 3, 'qosModeMinMax': 2, 'qosModeMaxPriority': 1.
     cdmipControllerConformance 1.3.6.1.4.1.6247.4.10
           cdmipControllerGroups 1.3.6.1.4.1.6247.4.10.1
               cdmipAdministrationGroup 1.3.6.1.4.1.6247.4.10.1.1
CDM-IP Controller Administration Group.
               cdmipInterfacesGroup 1.3.6.1.4.1.6247.4.10.1.2
CDM-IP Controller Interface Group.
               cdmipRouteTableGroup 1.3.6.1.4.1.6247.4.10.1.3
CDM-IP Controller Route Table Group.
               cdmipProtocolsGroup 1.3.6.1.4.1.6247.4.10.1.4
CDM-IP Controller Protocols Group.
               cdmipRedundancyGroup 1.3.6.1.4.1.6247.4.10.1.5
CDM-IP Controller Redundancy Group.
               cdmipOperMaintGroup 1.3.6.1.4.1.6247.4.10.1.6
CDM-IP Controller Oper. Maint. Group.
               cdmipStatisticsGroup 1.3.6.1.4.1.6247.4.10.1.7
CDM-IP Controller Statistics Group.
               cdmipQosRulesGroup 1.3.6.1.4.1.6247.4.10.1.8
CDM-IP Controller Qos Rules Group.
           cdmipControllerCompliances 1.3.6.1.4.1.6247.4.10.2
               cdmipControllerCompliance 1.3.6.1.4.1.6247.4.10.2.1
CDM-IP Controller Compliance.