CANOPY-SYS-MIB: View SNMP OID List / Download MIB

VENDOR: CAMBIUM NETWORKS LIMITED


 Home MIB: CANOPY-SYS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 motorola 1.3.6.1.4.1.17713
             p2p 1.3.6.1.4.1.17713.1
                 configuration 1.3.6.1.4.1.17713.1.5
                     iPAddress 1.3.6.1.4.1.17713.1.5.1 ipaddress read-only
Internet protocol (IP) address. This address is used by the family of Internet protocols to uniquely this identify the unit on a network
                     subnetMask 1.3.6.1.4.1.17713.1.5.2 ipaddress read-only
A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnetting can improve network security and performance.
                     gatewayIPAddress 1.3.6.1.4.1.17713.1.5.3 ipaddress read-only
The IP address of a computer on the current network that is currently acting as a network gateway. A gateway acts as an entrance / exit to packets from / to other networks.
                     targetMACAddress 1.3.6.1.4.1.17713.1.5.4 octet string read-only
MAC address of the PTP wireless unit forming the other end of the PTP link
                     masterSlaveMode 1.3.6.1.4.1.17713.1.5.5 integer read-only
The PTP wireless link operates using a master and slave relationship. Enumeration: 'slave': 1, 'master': 0.
                     maximumTransmitPower 1.3.6.1.4.1.17713.1.5.6 integer read-only
Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link
                 licence 1.3.6.1.4.1.17713.1.8
                     regionCode 1.3.6.1.4.1.17713.1.8.1 integer read-only
The region code prohibits the wireless unit from operating outside the regulated limits
                     productVariant 1.3.6.1.4.1.17713.1.8.2 integer read-only
The product variant Enumeration: 'motorola-canopy-150mbps-backhaul': 11, 'motorola-canopy-60mbps-backhaul': 2, 'spare-5': 8, 'spare-4': 7, 'spare-7': 10, 'spare-6': 9, 'spare-1': 4, 'spare-3': 6, 'spare-2': 5, 'motorola-canopy-300mbps-backhaul': 12, 'motorola-canopy-30mbps-backhaul': 3.
                     productName 1.3.6.1.4.1.17713.1.8.3 displaystring read-only
Name of the product variant
                     ethernetFibreSupport 1.3.6.1.4.1.17713.1.8.4 integer read-only
Ethernet fibre support availability on this wireless unit
                     frequencyVariant 1.3.6.1.4.1.17713.1.8.5 integer read-only
Frequency variant of the wireless unit Enumeration: 'freq-5400-mhz': 1, 'freq-4900-mhz': 2, 'freq-5800-mhz': 0.
                 mgmt 1.3.6.1.4.1.17713.1.9
                     targetRange 1.3.6.1.4.1.17713.1.9.1 integer read-only
Initial target range used in installation +/-1, expressed in tenths of a kilometer. When Auto-Ranging this must be set to 0
                     rangingMode 1.3.6.1.4.1.17713.1.9.2 integer read-only
Type of ranging to use during installation, either Auto-Ranging or use a selectable Target Range Enumeration: 'auto-0-100-km': 1, 'auto-0-200-km': 2, 'auto-0-40-km': 0, 'target-range': 3.
                 phyControl 1.3.6.1.4.1.17713.1.10
                       asymmetricTDD 1.3.6.1.4.1.17713.1.10.1 integer read-only
Control TDD Structure Enumeration: 'asymmetric-data-rate-2-to-1': 1, 'symmetric-data-rate-1-to-1': 0.
                 phyStatus 1.3.6.1.4.1.17713.1.12
                       receivePower 1.3.6.1.4.1.17713.1.12.1 integer read-only
Receive power expressed in tenths of a dBm
                       vectorError 1.3.6.1.4.1.17713.1.12.2 integer read-only
The vector error measurement compares the received signal's IQ modulation characteristics to an ideal signal to determine the composite error vector magnitude. The value represented by this attribute is the average vector error over the previous second expressed in tenths of a dB
                       transmitPower 1.3.6.1.4.1.17713.1.12.3 integer read-only
Transmit power expressed in tenths of a dBm
                       range 1.3.6.1.4.1.17713.1.12.4 integer read-only
Distance between the two peer wireless units expressed in tenths of a kilometer
                       linkLoss 1.3.6.1.4.1.17713.1.12.5 integer read-only
The wireless link loss expressed in tenths of a dB
                       receiveChannel 1.3.6.1.4.1.17713.1.12.6 integer read-only
Current active receive channel
                       transmitChannel 1.3.6.1.4.1.17713.1.12.7 integer read-only
Current active transmit channel
                       receiveModulationMode 1.3.6.1.4.1.17713.1.12.8 integer read-only
Current active receive modulation mode Enumeration: 'mod-64qam-0-75-single': 10, 'mod-16qam-0-63-dual': 16, 'mod-256qam-0-81-dual': 24, 'mod-transient-10': 23, 'mod-16qam-0-87-single': 8, 'mod-bpsk-0-63': 1, 'mod-qpsk-0-87-single': 4, 'mod-16qam-0-87-dual': 18, 'mod-64qam-0-92-dual': 22, 'mod-qpsk-0-63-single': 2, 'mod-64qam-0-75-dual': 20, 'mod-transient-6': 13, 'mod-transient-5': 11, 'mod-256qam-0-81-single': 14, 'mod-64qam-0-92-single': 12, 'mod-transient-1': 3, 'mod-transient-3': 7, 'mod-transient-2': 5, 'mod-16qam-0-63-single-a': 6, 'mod-transient-7': 17, 'mod-16qam-0-63-single-b': 15, 'mod-transient-9': 21, 'mod-transient-8': 19, 'mod-acquisition': 0.
                       transmitModulationMode 1.3.6.1.4.1.17713.1.12.9 integer read-only
Current active transmit modulation mode Enumeration: 'mod-64qam-0-75-single': 10, 'mod-16qam-0-63-dual': 16, 'mod-256qam-0-81-dual': 24, 'mod-transient-10': 23, 'mod-16qam-0-87-single': 8, 'mod-bpsk-0-63': 1, 'mod-qpsk-0-87-single': 4, 'mod-16qam-0-87-dual': 18, 'mod-64qam-0-92-dual': 22, 'mod-qpsk-0-63-single': 2, 'mod-64qam-0-75-dual': 20, 'mod-transient-6': 13, 'mod-transient-5': 11, 'mod-256qam-0-81-single': 14, 'mod-64qam-0-92-single': 12, 'mod-transient-1': 3, 'mod-transient-3': 7, 'mod-transient-2': 5, 'mod-16qam-0-63-single-a': 6, 'mod-transient-7': 17, 'mod-16qam-0-63-single-b': 15, 'mod-transient-9': 21, 'mod-transient-8': 19, 'mod-acquisition': 0.
                       receiveFreq 1.3.6.1.4.1.17713.1.12.11 integer read-only
Current receive frequency expressed in MHz
                       transmitFreq 1.3.6.1.4.1.17713.1.12.12 integer read-only
Current transmit frequency expressed in MHz
                       signalStrengthRatio 1.3.6.1.4.1.17713.1.12.13 integer read-only
Signal strength ratio (Vertical / Horizontal) expressed in tenths of a dB
                 reset 1.3.6.1.4.1.17713.1.18
                       systemReset 1.3.6.1.4.1.17713.1.18.1 integer read-write
Setting this attribute to '1' will cause a system reboot Enumeration: 'console-reboot': 1, 'running': 0.
                 versions 1.3.6.1.4.1.17713.1.19
                       softwareVersion 1.3.6.1.4.1.17713.1.19.1 displaystring read-only
Current software version
                       hardwareVersion 1.3.6.1.4.1.17713.1.19.2 displaystring read-only
Hardware platform version.
                       secondarySoftwareVersion 1.3.6.1.4.1.17713.1.19.3 displaystring read-only
Secondary software version, used when the primary software image is invalid or erased
                       bootVersion 1.3.6.1.4.1.17713.1.19.4 displaystring read-only
Boot code software version
                 pubStats 1.3.6.1.4.1.17713.1.20
                       receiveDataRate 1.3.6.1.4.1.17713.1.20.1 integer read-only
Average data rate over the last one second interval expressed in kbps
                       transmitDataRate 1.3.6.1.4.1.17713.1.20.2 integer read-only
Average data rate over the last one second interval expressed in kbps
                       aggregateDataRate 1.3.6.1.4.1.17713.1.20.3 integer read-only
Average data rate over the last one second interval (kbps).
                 encryption 1.3.6.1.4.1.17713.1.22
                       dEPRECATEDencryptionAlgorithm 1.3.6.1.4.1.17713.1.22.1 integer read-only
The Encryption Algorithm used by the wireless link. N.B. The same Encryption Algorithm must be configured at BOTH ends of the link for it to function correctly.
                       encryptionAlgorithm 1.3.6.1.4.1.17713.1.22.1 integer read-only
The Encryption Algorithm used by the wireless link. N.B. The same Encryption Algorithm must be configured at BOTH ends of the link for it to function correctly. Enumeration: 'none': 0, 'aes-256-bit-rijndael': 2, 'aes-rijndael': 1.
                 p2pTraps 1.3.6.1.4.1.17713.1.99
                       dfsChannelChangeTrap 1.3.6.1.4.1.17713.1.99.1
DFS channel change event
                       dfsImpulsiveInterferenceDetectedTrap 1.3.6.1.4.1.17713.1.99.2
DFS impulsive interference detected event
             p2mp 1.3.6.1.4.1.17713.2