CALIX-EOAM-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: CALIX NETWORKS


 Home MIB: CALIX-EOAM-EXT-MIB
Download as:   
SNMPv2-CONF, LLDP-MIB, IF-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, SNMPv2-TC, IEEE8021-CFM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 calixEoamExtMIB 1.3.6.1.4.1.6321.1.99
A MIB module that extends the support of Ethernet OAM standards. Extensions are made to IEEE 802.3ah MIB for Link OAM or EFM (Ethernet First Mile) functionality, IEEE 802.1ag MIB for Service OAM or CFM (Connection Fault Management) functionality, including ITU-T Y.1731 entities. This version is compatible with Interport SOAM release 3.0.
       calixEoamExtConfig 1.3.6.1.4.1.6321.1.99.1
           calixSoamExtMegTable 1.3.6.1.4.1.6321.1.99.1.1 no-access
This table contains all ITU-T Y.1731 MEG entries in the system.
               calixSoamExtMegEntry 1.3.6.1.4.1.6321.1.99.1.1.1 no-access
The ITU-T Y.1731 MEG entry.
                   calixSoamExtMegIdentifier 1.3.6.1.4.1.6321.1.99.1.1.1.1 unsigned32 no-access
Index of the MEG entry in the MEG table. There is a common indexing space shared between MAs (IEEE 802.1ag) and MEGs(ITU-T Y.1731).
                   calixSoamExtMegName 1.3.6.1.4.1.6321.1.99.1.1.1.2 octet string read-only
Textual name of the MEG.
                   calixSoamExtMegLevel 1.3.6.1.4.1.6321.1.99.1.1.1.3 dot1agcfmmdlevel read-only
Level for the MEG.
                   calixSoamExtMegCcmInterval 1.3.6.1.4.1.6321.1.99.1.1.1.4 dot1agcfmccminterval read-only
Interval between CCM transmissions to be used by all MEPs in the MEG.
                   calixSoamExtMegVid 1.3.6.1.4.1.6321.1.99.1.1.1.5 unsigned32 read-only
The Primary VLAN ID with which the MEG is associated, or 0 if the MEG is not attached to any VID. If the MEG is associated with more than one VID, the dot1agCfmVlanTable lists them.
                   calixSoamExtMegAutoDiscovery 1.3.6.1.4.1.6321.1.99.1.1.1.6 calixeoamenabletype read-only
Specifies if MEP autodiscovery feature is enabled or not for this particular MEG.
                   calixSoamExtMegAutoDiscoveryTimeout 1.3.6.1.4.1.6321.1.99.1.1.1.7 unsigned32 read-only
The timeout value for removal of peer MEPs added through autodetection if no CCM frames are received from that peer MEP.
                   calixSoamExtMegCciInterworking 1.3.6.1.4.1.6321.1.99.1.1.1.8 calixeoamenabletype read-only
Specifies if IEEE 802.1ag compatibility mode is enabled on this MEG.
                   calixSoamExtMegIdPermission 1.3.6.1.4.1.6321.1.99.1.1.1.9 dot1agcfmidpermission read-only
Enumerated value indicating what, if anything, is to be included in the Sender ID TLV transmitted by MPs configured in this MEG. The value sendIdDefer is not allowed.
                   calixSoamExtMegRowStatus 1.3.6.1.4.1.6321.1.99.1.1.1.10 rowstatus read-only
The status of the row. This field should be used to create or remove a MEG from the system.
           calixSoamExtMipTable 1.3.6.1.4.1.6321.1.99.1.2 no-access
This table contains all MIPs configured in the system.
               calixSoamExtMipEntry 1.3.6.1.4.1.6321.1.99.1.2.1 no-access
Each MIP in the system shall have an entry in this table.
                   calixSoamExtMipIdentifier 1.3.6.1.4.1.6321.1.99.1.2.1.1 unsigned32 no-access
Unique numerical identifier for the MIP.
                   calixSoamExtMipIfIndex 1.3.6.1.4.1.6321.1.99.1.2.1.3 interfaceindex read-only
This attributes specifies the interface index for the port on which the MIP is attached.
                   calixSoamExtMipAdminState 1.3.6.1.4.1.6321.1.99.1.2.1.4 calixeoamenabletype read-only
Administrative state of the MIP.
                   calixSoamExtMipMacAddress 1.3.6.1.4.1.6321.1.99.1.2.1.5 macaddress read-only
MAC address of the MIP.
                   calixSoamExtMipResetStat 1.3.6.1.4.1.6321.1.99.1.2.1.6 truthvalue read-only
True indicates MIPs statistics should be cleared.
                   calixSoamExtMipRowStatus 1.3.6.1.4.1.6321.1.99.1.2.1.7 rowstatus read-only
The status of the row. This attribute is used to create and delete a MIP in the system.
           calixSoamExtMipStatsTable 1.3.6.1.4.1.6321.1.99.1.3 no-access
This table contains Stats for all MIPs configured in the system.
               calixSoamExtMipStatsEntry 1.3.6.1.4.1.6321.1.99.1.3.1 no-access
Stats for a MIP entity.
                   calixSoamExtMipStatsDirection 1.3.6.1.4.1.6321.1.99.1.3.1.1 dot1agcfmmpdirection read-only
The direction in which the MHF faces for statistics.
                   calixSoamExtMipStatsLbmIn 1.3.6.1.4.1.6321.1.99.1.3.1.2 counter32 read-only
The number of LBMs received by this MIP.
                   calixSoamExtMipStatsLbrOut 1.3.6.1.4.1.6321.1.99.1.3.1.3 counter32 read-only
The number of LBRs sent by this MIP.
                   calixSoamExtMipStatsLtmIn 1.3.6.1.4.1.6321.1.99.1.3.1.4 counter32 read-only
The number of LTMs received by this MIP.
                   calixSoamExtMipStatsLtmForwarded 1.3.6.1.4.1.6321.1.99.1.3.1.5 counter32 read-only
The number of LTM messages forwarded by MIP.
                   calixSoamExtMipStatsLtrOut 1.3.6.1.4.1.6321.1.99.1.3.1.6 counter32 read-only
The number of LTR responses sent by this MIP.
                   calixSoamExtMipStatsLbmInvalidSenderId 1.3.6.1.4.1.6321.1.99.1.3.1.7 counter32 read-only
The total number of received LBM with a bad Sender ID.
                   calixSoamExtMipStatsDiscards 1.3.6.1.4.1.6321.1.99.1.3.1.8 counter32 read-only
The total number of discarded OAM frames.
                   calixSoamExtMipStatsResetStat 1.3.6.1.4.1.6321.1.99.1.3.1.9 truthvalue read-only
True indicates MEP statistics should be cleared.
           calixSoamExtMepDmExtTable 1.3.6.1.4.1.6321.1.99.1.4 no-access
This table contains extended attributes and counters for the standard MEP table dot1agCfmMepTable, in order to support Delay Measurement and Delay Variation Measurment functionality.
               calixSoamExtMepDmExtEntry 1.3.6.1.4.1.6321.1.99.1.4.1 no-access
MEP Extension (DM and DVM) table for a given MEP object.
                   calixSoamExtMepDmExtActive 1.3.6.1.4.1.6321.1.99.1.4.1.1 calixeoamenabletype read-only
Use to enable delay measurement.
                   calixSoamExtMepDmExtDestMacAddress 1.3.6.1.4.1.6321.1.99.1.4.1.2 macaddress read-only
The Target MAC Address field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column calixSoamExtMepDmExtDestIsMepId is 'False'.
                   calixSoamExtMepDmExtDestMepId 1.3.6.1.4.1.6321.1.99.1.4.1.3 dot1agcfmmepidorzero read-only
The MEP ID of remote MEP to which the DM is to be sent. This address will be used if the value of the column calixSoamExtMepDmExtDestIsMepId is 'True'.
                   calixSoamExtMepDmExtDestIsMepId 1.3.6.1.4.1.6321.1.99.1.4.1.4 truthvalue read-only
True indicates that MEP ID of the target MEP is used for DM transmission. False indicates that unicast destination MAC address of the target MEP is used for DM transmission.
                   calixSoamExtMepDmExtClassOfService 1.3.6.1.4.1.6321.1.99.1.4.1.5 unsigned32 read-only
Specifies the class of service for which the DMM is requested. A value of 8 indicates a full MEP level (CoS agnostic) request.
                   calixSoamExtMepDmExtDmPeriod 1.3.6.1.4.1.6321.1.99.1.4.1.6 integer read-only
Specifies the delay between two consecutive DM messages. Enumeration: 'dm1sec': 3, 'dm10sec': 4.
                   calixSoamExtMepDmExtMaxRtdThrSet 1.3.6.1.4.1.6321.1.99.1.4.1.7 unsigned32 read-only
The maximum round trip delay threshold upon which an alarm is to be raised.
                   calixSoamExtMepDmExtMaxRtdThrClr 1.3.6.1.4.1.6321.1.99.1.4.1.8 unsigned32 read-only
The maximum round trip delay threshold upon which an alarm is to be cleared.
                   calixSoamExtMepDmExtAvgRtdThrSet 1.3.6.1.4.1.6321.1.99.1.4.1.9 unsigned32 read-only
The average round trip delay threshold upon which an alarm is to be raised.
                   calixSoamExtMepDmExtAvgRtdThrClr 1.3.6.1.4.1.6321.1.99.1.4.1.10 unsigned32 read-only
The average round trip delay threshold upon which an alarm is to be cleared.
                   calixSoamExtMepDmExtMaxRtdVarThrSet 1.3.6.1.4.1.6321.1.99.1.4.1.11 unsigned32 read-only
The maximum round trip delay variation threshold upon which an alarm is to be raised.
                   calixSoamExtMepDmExtMaxRtdVarThrClr 1.3.6.1.4.1.6321.1.99.1.4.1.12 unsigned32 read-only
The maximum round trip delay variation threshold upon which an alarm is to be cleared.
                   calixSoamExtMepDmExtAvgRtdVarThrSet 1.3.6.1.4.1.6321.1.99.1.4.1.13 unsigned32 read-only
The average round trip delay variation threshold upon which an alarm is to be raised.
                   calixSoamExtMepDmExtAvgRtdVarThrClr 1.3.6.1.4.1.6321.1.99.1.4.1.14 unsigned32 read-only
The average round trip delay variation threshold upon which an alarm is to be cleared.
                   calixSoamExtMepDmExtAvgRoundTripDelay 1.3.6.1.4.1.6321.1.99.1.4.1.15 unsigned32 read-only
The average round trip delay for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtMinRoundTripDelay 1.3.6.1.4.1.6321.1.99.1.4.1.16 unsigned32 read-only
The minimum round trip delay for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtMaxRoundTripDelay 1.3.6.1.4.1.6321.1.99.1.4.1.17 unsigned32 read-only
The maximum round trip delay for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtAvgRoundTripDelayVariation 1.3.6.1.4.1.6321.1.99.1.4.1.18 unsigned32 read-only
The average round trip delay variation for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtMinRoundTripDelayVariation 1.3.6.1.4.1.6321.1.99.1.4.1.19 unsigned32 read-only
The minimum round trip delay variation for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtMaxRoundTripDelayVariation 1.3.6.1.4.1.6321.1.99.1.4.1.20 unsigned32 read-only
The maximum round trip delay variation for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtAvgRoundTripProcessingDelay 1.3.6.1.4.1.6321.1.99.1.4.1.21 unsigned32 read-only
The average processing delay for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtMinRoundTripProcessingDelay 1.3.6.1.4.1.6321.1.99.1.4.1.22 unsigned32 read-only
The minimum round trip delay variation for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtMaxRoundTripProcessingDelay 1.3.6.1.4.1.6321.1.99.1.4.1.23 unsigned32 read-only
The maximum round trip delay variation for the session, expressed in 1/100th of miliseconds.
                   calixSoamExtMepDmExtDataLength 1.3.6.1.4.1.6321.1.99.1.4.1.24 unsigned32 read-only
Length of data TLV in delay measurement frame.
                   calixSoamExtMepDmExtDataPattern 1.3.6.1.4.1.6321.1.99.1.4.1.25 unsigned32 read-only
Data pattern copied into data TLV.
           calixSoamExtMepLmExtTable 1.3.6.1.4.1.6321.1.99.1.5 no-access
This table contains extended attributes and counters for the standard MEP table dot1agCfmMepTable, in order to support FLM on demand functionality.
               calixSoamExtMepLmExtEntry 1.3.6.1.4.1.6321.1.99.1.5.1 no-access
MEP Extension (FLM) table for a given MEP object
                   calixSoamExtMepLmExtActive 1.3.6.1.4.1.6321.1.99.1.5.1.1 calixeoamenabletype read-only
Use to enable frame delay measurement.
                   calixSoamExtMepLmExtDestMacAddress 1.3.6.1.4.1.6321.1.99.1.5.1.2 macaddress read-only
The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column calixSoamExtMepLmExtDestIsMepId is 'False'.
                   calixSoamExtMepLmExtDestMepId 1.3.6.1.4.1.6321.1.99.1.5.1.3 dot1agcfmmepidorzero read-only
The MEP ID of remote MEP to which the FLM is to be sent. This address will be used if the value of the column calixSoamExtMepLmExtDestIsMepId is 'True'.
                   calixSoamExtMepLmExtDestIsMepId 1.3.6.1.4.1.6321.1.99.1.5.1.4 truthvalue read-only
True indicates that MEPID is used for FLM transmission. False indicates that unicast destination MAC address is used for FLM transmission.
                   calixSoamExtMepLmExtLmType 1.3.6.1.4.1.6321.1.99.1.5.1.5 calixsoamlmtype read-only
Specifies the type of Frame Loss Measurement: Single or Dual.
                   calixSoamExtMepLmExtClassOfService 1.3.6.1.4.1.6321.1.99.1.5.1.6 unsigned32 read-only
Specifies the class of service for which the FLM is requested. A value of 8 indicates a full MEP level (CoS agnostic) request.
                   calixSoamExtMepLmExtLmPeriod 1.3.6.1.4.1.6321.1.99.1.5.1.7 integer read-only
Specifies the delay between two consecutive FLM messages Enumeration: 'lm1sec': 2, 'lm100ms': 1, 'lm10sec': 3.
                   calixSoamExtMepLmExtMaxNearEndLossThrSet 1.3.6.1.4.1.6321.1.99.1.5.1.8 unsigned32 read-only
The maximum near end frame loss threshold upon which an alarm is to be raised.
                   calixSoamExtMepLmExtMaxNearEndLossThrClr 1.3.6.1.4.1.6321.1.99.1.5.1.9 unsigned32 read-only
The maximum near end frame loss threshold upon which an alarm is to be cleared.
                   calixSoamExtMepLmExtAvgNearEndLossThrSet 1.3.6.1.4.1.6321.1.99.1.5.1.10 unsigned32 read-only
The average near end frame loss threshold upon which an alarm is to be raised.
                   calixSoamExtMepLmExtAvgNearEndLossThrClr 1.3.6.1.4.1.6321.1.99.1.5.1.11 unsigned32 read-only
The average near end frame loss threshold upon which an alarm is to be cleared.
                   calixSoamExtMepLmExtMaxFarEndLossThrSet 1.3.6.1.4.1.6321.1.99.1.5.1.12 unsigned32 read-only
The maximum far end loss threshold upon which an alarm is to be raised.
                   calixSoamExtMepLmExtMaxFarEndLossThrClr 1.3.6.1.4.1.6321.1.99.1.5.1.13 unsigned32 read-only
The maximum far end loss threshold upon which an alarm is to be cleared.
                   calixSoamExtMepLmExtAvgFarEndLossThrSet 1.3.6.1.4.1.6321.1.99.1.5.1.14 unsigned32 read-only
The average far end loss threshold upon which an alarm is to be raised.
                   calixSoamExtMepLmExtAvgFarEndLossThrClr 1.3.6.1.4.1.6321.1.99.1.5.1.15 unsigned32 read-only
The average far end loss threshold upon which an alarm is to be cleared.
                   calixSoamExtMepLmExtNearEndLostPkts 1.3.6.1.4.1.6321.1.99.1.5.1.16 counter32 read-only
Number of frames lost at the near end.
                   calixSoamExtMepLmExtNearEndLossRatio 1.3.6.1.4.1.6321.1.99.1.5.1.17 unsigned32 read-only
Frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
                   calixSoamExtMepLmExtMaxNearEndLossRatio 1.3.6.1.4.1.6321.1.99.1.5.1.18 unsigned32 read-only
Maximum frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
                   calixSoamExtMepLmExtMinNearEndLossRatio 1.3.6.1.4.1.6321.1.99.1.5.1.19 unsigned32 read-only
Minimum frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
                   calixSoamExtMepLmExtAvgNearEndLossRatio 1.3.6.1.4.1.6321.1.99.1.5.1.20 unsigned32 read-only
Average frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
                   calixSoamExtMepLmExtFarEndLostPkts 1.3.6.1.4.1.6321.1.99.1.5.1.21 counter32 read-only
Number of frames lost at the far end.
                   calixSoamExtMepLmExtFarEndLossRatio 1.3.6.1.4.1.6321.1.99.1.5.1.22 unsigned32 read-only
Frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
                   calixSoamExtMepLmExtMaxFarEndLossRatio 1.3.6.1.4.1.6321.1.99.1.5.1.23 unsigned32 read-only
Maximum frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
                   calixSoamExtMepLmExtMinFarEndLossRatio 1.3.6.1.4.1.6321.1.99.1.5.1.24 unsigned32 read-only
Minimum frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
                   calixSoamExtMepLmExtAvgFarEndLossRatio 1.3.6.1.4.1.6321.1.99.1.5.1.25 unsigned32 read-only
Average frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
           calixSoamExtMepMcastLoopbackSessionTable 1.3.6.1.4.1.6321.1.99.1.6 no-access
This table is used to initiate a multicast loopback request for a given MEP.
               calixSoamExtMepMcastLoopbackSessionEntry 1.3.6.1.4.1.6321.1.99.1.6.1 no-access
Each MEP can have only one active Multicast Loopback Request at a given time.
                   calixSoamExtMepMcastLoopbackSessionStatus 1.3.6.1.4.1.6321.1.99.1.6.1.1 integer read-only
Specifies the status of the Multicast Loopback request for the particular ITU-T Y.1731 MEP. In order to activate a new session, write 'activate' in this variable. Enumeration: 'failed': 5, 'none': 1, 'activate': 4, 'completed': 3, 'inProgress': 2.
                   calixSoamExtMepMcastLoopbackSessionReplies 1.3.6.1.4.1.6321.1.99.1.6.1.2 unsigned32 read-only
Indicates the number of replies received for this multicast loopback session.
           calixSoamExtMepMcastLoopbackResultsTable 1.3.6.1.4.1.6321.1.99.1.7 no-access
This table is used to read the results of a multicast loopback request for a given MEP.
               calixSoamExtMepMcastLoopbackResultsEntry 1.3.6.1.4.1.6321.1.99.1.7.1 no-access
Each MEP can have only one active Multicast Loopback Request at a given time. This table presents the results of the last request indexed by the reply order.
                   calixSoamExtMepMcastLoopbackResultsIndex 1.3.6.1.4.1.6321.1.99.1.7.1.1 unsigned32 no-access
Specifies the index of the multicast loopback result.
                   calixSoamExtMepMcastLoopbackResultsMacAddress 1.3.6.1.4.1.6321.1.99.1.7.1.2 macaddress read-only
MAC address for the received reply.
           calixSoamExtMepStatsExtTable 1.3.6.1.4.1.6321.1.99.1.8 no-access
This table contains extensions of the dot1agCfmMepTable for MEP Statistics.
               calixSoamExtMepStatsExtEntry 1.3.6.1.4.1.6321.1.99.1.8.1 no-access
Extended counters and attributes for MEP configuration.
                   calixSoamExtMepStatsExtCcmRdiSent 1.3.6.1.4.1.6321.1.99.1.8.1.1 counter32 read-only
The total number of sent CCMs with RDI bit set.
                   calixSoamExtMepStatsExtCcmReceived 1.3.6.1.4.1.6321.1.99.1.8.1.2 counter32 read-only
The total number of CCMs received from all remote MEPs.
                   calixSoamExtMepStatsExtCcmInvalidSenderId 1.3.6.1.4.1.6321.1.99.1.8.1.3 counter32 read-only
The total number of CCMs with invalid Sender ID TLV received from all remote MEPs.
                   calixSoamExtMepStatsExtCcmInvalidPortStatus 1.3.6.1.4.1.6321.1.99.1.8.1.4 counter32 read-only
The total number of CCMs with invalid Port Status TLV received from all remote MEPs.
                   calixSoamExtMepStatsExtCcmInvalidIfStatus 1.3.6.1.4.1.6321.1.99.1.8.1.5 counter32 read-only
The total number of CCMs with invalid Interface Status TLV received from all remote MEPs.
                   calixSoamExtMepStatsExtCcmRdiReceived 1.3.6.1.4.1.6321.1.99.1.8.1.6 counter32 read-only
The total number of CCMs with RDI bit set received from all remote MEPs.
                   calixSoamExtMepStatsExtLbmReceived 1.3.6.1.4.1.6321.1.99.1.8.1.7 counter32 read-only
The total number of LBM messages received.
                   calixSoamExtMepStatsExtLbmSent 1.3.6.1.4.1.6321.1.99.1.8.1.8 counter32 read-only
The total number of LBM messages sent.
                   calixSoamExtMepStatsExtLbmInvalidSenderId 1.3.6.1.4.1.6321.1.99.1.8.1.9 counter32 read-only
The total number of LBM messages received with a bad sender ID.
                   calixSoamExtMepStatsExtLbrInvalidSenderId 1.3.6.1.4.1.6321.1.99.1.8.1.10 counter32 read-only
The total number of LBR messages received with a bad sender ID.
                   calixSoamExtMepStatsExtLtmReceived 1.3.6.1.4.1.6321.1.99.1.8.1.11 counter32 read-only
The total number of LTM messages received.
                   calixSoamExtMepStatsExtLtmSent 1.3.6.1.4.1.6321.1.99.1.8.1.12 counter32 read-only
The total number of LTM messages sent.
                   calixSoamExtMepStatsExtLtrInvalidMac 1.3.6.1.4.1.6321.1.99.1.8.1.13 counter32 read-only
The total number of LTR messages received with a bad MAC address.
                   calixSoamExtMepStatsExtLtrReceived 1.3.6.1.4.1.6321.1.99.1.8.1.14 counter32 read-only
The total number of LTR messages received.
                   calixSoamExtMepStatsExtLtrSent 1.3.6.1.4.1.6321.1.99.1.8.1.15 counter32 read-only
The total number of LTR messages sent.
                   calixSoamExtMepStatsExtLmmReceived 1.3.6.1.4.1.6321.1.99.1.8.1.16 counter32 read-only
The total number of LMM messages received.
                   calixSoamExtMepStatsExtLmmSent 1.3.6.1.4.1.6321.1.99.1.8.1.17 counter32 read-only
The total number of LMM messages sent.
                   calixSoamExtMepStatsExtLmrReceived 1.3.6.1.4.1.6321.1.99.1.8.1.18 counter32 read-only
The total number of LMR messages received.
                   calixSoamExtMepStatsExtLmrSent 1.3.6.1.4.1.6321.1.99.1.8.1.19 counter32 read-only
The total number of LMR messages sent.
                   calixSoamExtMepStatsExtDmmReceived 1.3.6.1.4.1.6321.1.99.1.8.1.20 counter32 read-only
The total number of DMM messages received.
                   calixSoamExtMepStatsExtDmmSent 1.3.6.1.4.1.6321.1.99.1.8.1.21 counter32 read-only
The total number of DMM messages sent.
                   calixSoamExtMepStatsExtDmrReceived 1.3.6.1.4.1.6321.1.99.1.8.1.22 counter32 read-only
The total number of DMR messages received.
                   calixSoamExtMepStatsExtDmrSent 1.3.6.1.4.1.6321.1.99.1.8.1.23 counter32 read-only
The total number of DMR messages sent.
                   calixSoamExtMepStatsExtResetStat 1.3.6.1.4.1.6321.1.99.1.8.1.24 truthvalue read-only
True indicates MEP statistics should be cleared.
           calixSoamExtMepUcastLoopbackResultsTable 1.3.6.1.4.1.6321.1.99.1.9 no-access
This table contains Unicast Loopback protocol results for corresponding MEP.
               calixSoamExtMepUcastLoopbackResultsEntry 1.3.6.1.4.1.6321.1.99.1.9.1 no-access
Unicast Loopback result for corresponding MEP.
                   calixSoamExtMepUcastLoopbackResultsLbmFirstSeqNumber 1.3.6.1.4.1.6321.1.99.1.9.1.1 unsigned32 read-only
The Loopback Transaction Identifier of the first LBM sent. This value can be obtained from dot1agCfmMepTransmitLbmSeqNumber of dot1agCfmMepTable table after Loopback transmitting.
                   calixSoamExtMepUcastLoopbackResultsDestMacAddress 1.3.6.1.4.1.6321.1.99.1.9.1.2 macaddress read-only
The MAC Address of destination MP.
                   calixSoamExtMepUcastLoopbackResultsStatus 1.3.6.1.4.1.6321.1.99.1.9.1.3 integer read-only
Specifies the state of the current Loopback request. Enumeration: 'failed': 2, 'none': 0, 'inProgress': 1, 'succeeded': 3.
                   calixSoamExtMepUcastLoopbackResultsLbmOut 1.3.6.1.4.1.6321.1.99.1.9.1.4 counter32 read-only
Loopback Messages sent.
                   calixSoamExtMepUcastLoopbackResultsLbrIn 1.3.6.1.4.1.6321.1.99.1.9.1.5 counter32 read-only
Loopback replies received.
           calixSoamExtCfgTable 1.3.6.1.4.1.6321.1.99.1.10 no-access
This table contains Unicast Loopback protocol results for corresponding MEP.
                 calixSoamExtCfgEntry 1.3.6.1.4.1.6321.1.99.1.10.1 no-access
General Service OAM Configuration Table.
                     calixSoamExtCfgIndex 1.3.6.1.4.1.6321.1.99.1.10.1.1 unsigned32 read-only
Index of auto instantited configuration MIB. Must be 1.
                     calixSoamExtCfgAdminState 1.3.6.1.4.1.6321.1.99.1.10.1.2 calixeoamenabletype read-only
State of Service level Ethernet OAM. Set this to enable to begin transmitting Ethernet OAM frames from configures MEG/MEPs.
                     calixSoamExtCfgPermission 1.3.6.1.4.1.6321.1.99.1.10.1.3 dot1agcfmidpermission read-only
Default permission level determining which optional TLVs to include.
                     calixSoamExtCfgChassisIdSubtype 1.3.6.1.4.1.6321.1.99.1.10.1.4 lldpchassisidsubtype read-only
Chassis ID Subtype.
                     calixSoamExtCfgChassisId 1.3.6.1.4.1.6321.1.99.1.10.1.5 lldpchassisid read-only
Chassis ID.
                     calixSoamExtCfgManAddressDomain 1.3.6.1.4.1.6321.1.99.1.10.1.6 tdomain read-only
Management Domain.
                     calixSoamExtCfgManAddress 1.3.6.1.4.1.6321.1.99.1.10.1.7 taddress read-only
Management Address.
                     calixSoamExtCfgCcmOptTlvSenderId 1.3.6.1.4.1.6321.1.99.1.10.1.8 calixeoamenabletype read-only
Enable to include sender ID TLV in CCM messages.
                     calixSoamExtCfgCcmOptTlvPortStatus 1.3.6.1.4.1.6321.1.99.1.10.1.9 calixeoamenabletype read-only
Enable to include Port Status TLV in CCM messages.
                     calixSoamExtCfgCcmOptTlvIfStatus 1.3.6.1.4.1.6321.1.99.1.10.1.10 calixeoamenabletype read-only
Enable to include Interface Status TLV in CCM messages.
                     calixSoamExtCfgLtmOptTlvSenderId 1.3.6.1.4.1.6321.1.99.1.10.1.11 calixeoamenabletype read-only
Enable to include Sender ID TLV in LTM messages.
                     calixSoamExtCfgLbmOptTlvSenderId 1.3.6.1.4.1.6321.1.99.1.10.1.12 calixeoamenabletype read-only
Enable to include Sender ID TLV in LBM messages.
                     calixSoamExtCfgLbmOptTlvIfStatus 1.3.6.1.4.1.6321.1.99.1.10.1.13 calixeoamenabletype read-only
Enable to include Interface Status TLV in LBM messages.
                     calixSoamExtCfgLbmOptTlvData 1.3.6.1.4.1.6321.1.99.1.10.1.14 calixeoamenabletype read-only
Enable to include Data TLV in LBM messages.
                     calixSoamExtCfgDmmOptTlvData 1.3.6.1.4.1.6321.1.99.1.10.1.15 calixeoamenabletype read-only
Enable to include Data TLV in DMM messages.
           calixLoamExtCfgTable 1.3.6.1.4.1.6321.1.99.1.11 no-access
This table contains settings for enabling/disabling the Link OAM feature.
                 calixLoamExtCfgEntry 1.3.6.1.4.1.6321.1.99.1.11.1 no-access
General Link OAM Configuration Table.
                     calixLoamExtCfgIndex 1.3.6.1.4.1.6321.1.99.1.11.1.1 unsigned32 read-only
Index of auto instantiated configuration MIB. Must be 1.
                     calixLoamExtCfgAdminState 1.3.6.1.4.1.6321.1.99.1.11.1.2 calixeoamenabletype read-write
State of Service level Ethernet OAM. Set this to enable to begin transmitting Ethernet OAM frames from configures MEG/MEPs.
           calixRfc2544CfgTable 1.3.6.1.4.1.6321.1.99.1.12 no-access
This table places a port in RFC2544 Reflector Mode.
                 calixRfc2544CfgEntry 1.3.6.1.4.1.6321.1.99.1.12.1 no-access
Only one port can be in RFC 2544 Reflector Mode at any given time.
                     calixRfc2544CfgIndex 1.3.6.1.4.1.6321.1.99.1.12.1.1 unsigned32 read-only
Index of auto instantiated RFC 2544 configuration MIB. Must be 1.
                     calixRfc2544CfgAdminState 1.3.6.1.4.1.6321.1.99.1.12.1.2 calixeoamenabletype read-only
Administrative state of the RFC 2544 Reflector.
                     calixRfc2544CfgIfIndex 1.3.6.1.4.1.6321.1.99.1.12.1.3 interfaceindex read-write
This attributes specifies the interface index for the port in RFC 2544 Reflector Mode.
                     calixRfc2544CfgVlanId 1.3.6.1.4.1.6321.1.99.1.12.1.4 vlanid read-write
VLAN ID of Service.
                     calixRfc2544CfgMacAddress 1.3.6.1.4.1.6321.1.99.1.12.1.5 macaddress read-write
Destination MAC address of frames to reflect.