CALIX-E7-SELT-LINE-MIB: View SNMP OID List / Download MIB

VENDOR: CALIX NETWORKS


 Home MIB: CALIX-E7-SELT-LINE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, CALIX-PRODUCT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 e7SeltTestDiags 1.3.6.1.4.1.6321.1.2.2.9
This MIB Module is for E7 xDSL SELT diagnostics.
     e7XdslSeltLineTable 1.3.6.1.4.1.6321.1.2.2.9.1 no-access
The table xdslSeltLineTable contains configuration, command and status parameters of the xDSL line. Several objects in this table MUST be maintained in a persistent manner.
         e7XdslSeltLineEntry 1.3.6.1.4.1.6321.1.2.2.9.1.1 no-access
The index of this table is an interface index where the interface has an ifType of xdslSelt(9).
             e7XdslUsMargin 1.3.6.1.4.1.6321.1.2.2.9.1.1.1 integer read-only
Selt US Margin.
             e7XdslDsMargin 1.3.6.1.4.1.6321.1.2.2.9.1.1.2 integer read-only
Selt DS Margin.
             e7XdslUsNumTones 1.3.6.1.4.1.6321.1.2.2.9.1.1.3 integer read-only
Selt US Number of Tones.
             e7XdslDsNumTones 1.3.6.1.4.1.6321.1.2.2.9.1.1.4 integer read-only
Selt DS Number of Tones.
             e7XdslUsRate 1.3.6.1.4.1.6321.1.2.2.9.1.1.5 integer read-only
Selt US capacity estimate rate.
             e7XdslDsRate 1.3.6.1.4.1.6321.1.2.2.9.1.1.6 integer read-only
Selt DS capacity estimate rate.
             e7XdslBestFitIdx 1.3.6.1.4.1.6321.1.2.2.9.1.1.7 integer read-only
Best fit/match reflection report index.
             e7XdslLoopType 1.3.6.1.4.1.6321.1.2.2.9.1.1.8 integer read-only
Loop Type 0 = Awg 24, 1 = Awg 26.
             e7XdslLoopLength 1.3.6.1.4.1.6321.1.2.2.9.1.1.9 integer read-only
Loop Length Estimate in meters.
             e7XdslFitError 1.3.6.1.4.1.6321.1.2.2.9.1.1.10 integer read-only
Best Fit Error
             e7XdslSeltLineCmndConfLdsfFailReason 1.3.6.1.4.1.6321.1.2.2.9.1.1.11 integer read-only
The status of the recent occasion the Loop diagnostics mode forced (LDSF) was issued for the associated line. Possible values are: none(1) - The default value in case LDSF was never requested for the associated line. success(2) - The recent command completed successfully. inProgress(3) - The Loop Diagnostics process is in progress. cannotRun(4) - The NE cannot initiate the command, due to a non-specific reason. aborted(5) - The Loop Diagnostics process aborted. failed(6) - The Loop Diagnostics process failed. tableFull(7) - The NE cannot initiate the command, due to reaching the maximum number of rows in the results table. noResources(8) - The NE cannot initiate the command, due to lack of internal memory resources. Enumeration: 'none': 1, 'success': 2, 'failed': 6, 'cannotRun': 4, 'aborted': 5, 'inProgress': 3.
             e7XdslSeltLineCmndConfLdsf 1.3.6.1.4.1.6321.1.2.2.9.1.1.12 integer read-write
Loop diagnostics mode forced (LDSF) for Selt Test. Defines whether the line should be forced into the Selt loop diagnostics mode by the near-end ATU on this line. Enumeration: 'inhibit': 0, 'force': 1.
     e7SeltReportStatusTable 1.3.6.1.4.1.6321.1.2.2.9.2 no-access
The table SeltReportStatusTable contains status parameters for SELT test reflection report. The parameters in this table MUST be updated after a loop diagnostic procedure completion
         e7SeltReportStatusEntry 1.3.6.1.4.1.6321.1.2.2.9.2.1 no-access
The table SeltReportStatusEntry contains status parameters of the SELT test reflection report. The index of this table is an interface index.
             e7SeltBestFitIdx 1.3.6.1.4.1.6321.1.2.2.9.2.1.1 integer read-only
SELT test best fit index. The valid values are 0, 1, 2.
             e7SeltReportValid 1.3.6.1.4.1.6321.1.2.2.9.2.1.2 integer read-only
SELT test report valid state values. 1 = valid and 0 = not-valid
             e7SeltRoundTripDelay 1.3.6.1.4.1.6321.1.2.2.9.2.1.3 octet string read-only
SELT test round trip delay.
             e7SeltRoundTripError 1.3.6.1.4.1.6321.1.2.2.9.2.1.4 octet string read-only
SELT test round trip error.
             e7SeltAttn300KHz 1.3.6.1.4.1.6321.1.2.2.9.2.1.5 octet string read-only
SELT test attenuation signal 300Khz.
             e7SeltAttn180KHz 1.3.6.1.4.1.6321.1.2.2.9.2.1.6 octet string read-only
SELT test attenuation signal 180Khz.
             e7SeltAttn1MHz 1.3.6.1.4.1.6321.1.2.2.9.2.1.7 octet string read-only
SELT test attenuation signal 1 MHz.
             e7SeltAttnEndOfRange 1.3.6.1.4.1.6321.1.2.2.9.2.1.8 octet string read-only
SELT test attenuation end of range.
             e7SeltFitError 1.3.6.1.4.1.6321.1.2.2.9.2.1.9 octet string read-only
SELT test fit error.
             e7SeltTerminationPhase 1.3.6.1.4.1.6321.1.2.2.9.2.1.10 octet string read-only
SELT test termination phase.
             e7SeltTransferFunction 1.3.6.1.4.1.6321.1.2.2.9.2.1.11 octet string read-only
SELT test transfer function.
             e7SeltRangeStart 1.3.6.1.4.1.6321.1.2.2.9.2.1.12 integer read-only
SELT test range start.
             e7SeltRangeStop 1.3.6.1.4.1.6321.1.2.2.9.2.1.13 integer read-only
SELT test range stop.