C-PRODUCT-QSIM-MIB: View SNMP OID List / Download MIB

VENDOR: 3COM


 Home MIB: C-PRODUCT-QSIM-MIB
Download as:   
C-PRODUCT-BASE-MIB, SNMPv2-CONF, SNMPv2-SMI, C-PRODUCT-GROUP-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 qsimCard 1.3.6.1.4.1.43.1.12.1.1.12.1
     qsimCardTable 1.3.6.1.4.1.43.1.12.1.1.12.1.1 no-access
Card configuration table.
         qsimCardEntry 1.3.6.1.4.1.43.1.12.1.1.12.1.1.1 no-access
Card configuration entry.
             qsimCardMaxFrameSize 1.3.6.1.4.1.43.1.12.1.1.12.1.1.1.1 integer read-write
Maximum frame size for SDLC, DXI and Frame Relay frames. WARNING: Change of the Maximum Frame Size will cause Disruption of Service provided by the card. Enumeration: 'mfs-2kb': 1, 'mfs-4kb': 2, 'mfs-8kb': 3.
 qsimPort 1.3.6.1.4.1.43.1.12.1.1.12.2
     qsimPortTable 1.3.6.1.4.1.43.1.12.1.1.12.2.1 no-access
QSIM port configuration table.
         qsimPortEntry 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1 no-access
QSIM port configuration entry. The slot number (portSlot) of this card can be from 4 to 6. The port number (portNumber) can be from 1 to 4.
             qsimPortLinkType 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.1 integer read-write
Link layer protocol supported by the port. Enumeration: 'frame-relay': 3, 'dxi': 1, 'sdlc': 2.
             qsimPortCableType 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.2 integer read-only
Type of cable connected to the port. Enumeration: 'none': 1, 'dce': 3, 'dte': 2.
             qsimPortTermTimingSource 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.3 integer read-write
Terminal timing source. This object applies ONLY when a DCE cable is connected to the port. If cable type is 'none' or 'dce', this object can be read and written. If cable type is 'dte', a get request returns whatever value currently stored in the managed node for this port and a set request returns genErr. Enumeration: 'internal': 1, 'external': 2.
             qsimPortReceiveTimingPhase 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.4 integer read-write
Receive timing phase control. This object applies ONLY when a DCE cable is connected to the port. If cable type is 'none' or 'dce', this object can be read and written. If cable type is 'dte', a get request returns whatever value currently stored in the managed node for this port and a set request returns genErr. Enumeration: 'normal': 1, 'inverted': 2.
             qsimPortDataRate 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.5 integer read-write
Data rate supported by the port. Enumeration: 'dr-64k': 1, 'dr-2m': 6, 'dr-512k': 4, 'dr-1m': 5, 'dr-128k': 2, 'dr-4m': 7, 'dr-256k': 3, 'dr-8m': 8.
             qsimPortMinFlagBytes 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.6 integer read-write
Minimum flag bytes required to distinguish a frame. Enumeration: 'fb-2': 2, 'fb-1': 1.
             qsimPortFcsSize 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.7 integer read-write
Number of bytes in the FCS field of a frame. Enumeration: 'fcs-2': 1, 'fcs-4': 2.
             qsimPortRts 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.8 pinstatus read-only
RTS pin status.
             qsimPortCts 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.9 pinstatus read-only
CTS pin status.
             qsimPortDcd 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.10 pinstatus read-only
DCD pin status.
             qsimPortDsr 1.3.6.1.4.1.43.1.12.1.1.12.2.1.1.11 pinstatus read-only
DSR pin status.
 hsimPort 1.3.6.1.4.1.43.1.12.1.1.12.3
     hsimPortTable 1.3.6.1.4.1.43.1.12.1.1.12.3.1 no-access
HSIM port configuration table.
         hsimPortEntry 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1 no-access
HSIM port configuration entry. The slot number (portSlot) of this card can be from 4 to 6. The port number (portNumber) of this card is always 1.
             hsimPortLinkType 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.1 integer read-write
Link layer protocol supported by the port. Enumeration: 'frame-relay': 3, 'dxi': 1, 'sdlc': 2.
             hsimPortDceDteMode 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.2 integer read-write
DCE/DTE mode of the port. Enumeration: 'dce': 1, 'dte': 2.
             hsimPortDataRate 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.3 integer read-only
Data rate supported by the port. Enumeration: 'dr-20m': 1.
             hsimPortMinFlagBytes 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.4 integer read-write
Minimum flag bytes required to distinguish a frame. Enumeration: 'fb-2': 2, 'fb-1': 1.
             hsimPortFcsSize 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.5 integer read-write
Number of bytes in the FCS field of a frame. Enumeration: 'fcs-2': 1, 'fcs-4': 2.
             hsimPortTa 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.6 pinstatus read-only
TA pin status.
             hsimPortCa 1.3.6.1.4.1.43.1.12.1.1.12.3.1.1.7 pinstatus read-only
CA pin status.
 qsimVc 1.3.6.1.4.1.43.1.12.1.1.12.4
     qsimSdlcVc 1.3.6.1.4.1.43.1.12.1.1.12.4.1
     qsimDxiVc 1.3.6.1.4.1.43.1.12.1.1.12.4.2
     qsimFrameRelayVc 1.3.6.1.4.1.43.1.12.1.1.12.4.3
 qsimLmi 1.3.6.1.4.1.43.1.12.1.1.12.6
     qsimLmiTable 1.3.6.1.4.1.43.1.12.1.1.12.6.1 no-access
LMI configuration table.
         qsimLmiEntry 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1 no-access
LMI configuration entry. The slot number (portSlot) should be from 4 to 6. The port number (portNumber) is from 1 to 4 for QSIM card, 1 to 8 for FAM card, and 1 for HSIM card.
             qsimLmiProtocol 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.1 integer read-write
LMI protocol supported by the port. Enumeration: 'q-933a': 2, 'none': 1, 't1-617d': 3.
             qsimLmiProcedure 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.2 integer read-write
LMI procedure supported by the port. This object applies when LMI Q.933 Annex A or T1.617 Annex D protocol is selected. Enumeration: 'bidirectional': 3, 'user-side': 1, 'network-side': 2.
             qsimLmiUserT391 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.3 integer read-write
User-side link integrity verification (LIV) polling timer. This object applies when LMI user-side or bidirectional procedure is selected.
             qsimLmiUserN391 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.4 integer read-write
User-side full status polling counter. This object applies when LMI user-side or bidirectional procedure is selected.
             qsimLmiUserN392 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.5 integer read-write
User-side error threshold. This object applies when LMI user-side or bidirectional procedure is selected. User-side N392 should be less than or equal to user- side N393.
             qsimLmiUserN393 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.6 integer read-write
User-side monitored events count. This object applies when LMI user-side or bidirectional procedure is selected.
             qsimLmiNetworkT392 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.7 integer read-write
Network-side polling verification timer. This object applies when LMI network-side or bidirectional procedure is selected.
             qsimLmiNetworkN392 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.8 integer read-write
Network-side error threshold. This object applies when LMI network-side or bidirectional procedure is selected. Network-side N392 should be less than or equal to Network- side N393.
             qsimLmiNetworkN393 1.3.6.1.4.1.43.1.12.1.1.12.6.1.1.9 integer read-write
Network-side monitored events count. This object applies when LMI network-side or bidirectional procedure is selected.
 qsimNewVc 1.3.6.1.4.1.43.1.12.1.1.12.9
     qsimNewSdlcVc 1.3.6.1.4.1.43.1.12.1.1.12.9.1
         qsimNewSdlcVcTable 1.3.6.1.4.1.43.1.12.1.1.12.9.1.1 no-access
SDLC VC configuration table.
             qsimNewSdlcVcEntry 1.3.6.1.4.1.43.1.12.1.1.12.9.1.1.1 no-access
SDLC VC configuration entry. The slot number (vcPortSlot) of the VC can be from 4 to maxslots. The port number (vcPortPort) can be from 1 to 4.
                 qsimNewSdlcVcShapper 1.3.6.1.4.1.43.1.12.1.1.12.9.1.1.1.1 integer read-write
Data rate supported by the SDLC VC. Depending on the type of card a VC is configured, the shapper numbers are assigned as follows: HSIM QSIM data rate data rate shapper number --------- --------- -------------- 1.5m 64k 1 3m 128k 2 4.5m 192k 3 6m 256k 4 7.5m 384k 5 9m 512k 6 10.5m 640k 7 12m 768k 8 13.5m 1m 9 15m 1.5m 10 16.5m 2m 11 18m 4m 12 20m 8m 13
     qsimNewDxiVc 1.3.6.1.4.1.43.1.12.1.1.12.9.2
         qsimNewDxiVcTable 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1 no-access
DXI VC configuration table.
             qsimNewDxiVcEntry 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1 no-access
DXI VC configuration entry. The slot number (vcPortSlot) of the VC can be from 4 to 6. The port number (vcPortPort) can be from 1 to 4.
                 qsimNewDxiVcDfaVpi 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1.1 integer read-write
DXI DFA VPI.
                 qsimNewDxiVcDfaVci 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1.2 integer read-write
DXI DFA VCI.
                 qsimNewDxiVcDfaVciRange 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1.3 integer read-write
DXI VCI range. This object is used to create a set of VCs whose VPI equals to the value of the instance of qsimDxiVcDfaVpi and whose VCIs are in the range FROM 'the value of the instance of qsimDxiVcDfaVci' TO 'the value of the instance of this object PLUS the value of the instance of qsiDxiVcDfaVci MINUS 1'. A successful set request will generate 1 to N VC entries in this table. Where N equals to the value of the instance of this object. A get request always returns 1.
                 qsimNewDxiVcShapper 1.3.6.1.4.1.43.1.12.1.1.12.9.2.1.1.4 integer read-write
Data rate supported by the DXI VC. Depending on the type of card a VC is configured, the shapper numbers are assigned as follows: HSIM QSIM data rate data rate shapper number --------- --------- -------------- 1.5m 64k 1 3m 128k 2 4.5m 192k 3 6m 256k 4 7.5m 384k 5 9m 512k 6 10.5m 640k 7 12m 768k 8 13.5m 1m 9 15m 1.5m 10 16.5m 2m 11 18m 4m 12 20m 8m 13
     qsimNewFrameRelayVc 1.3.6.1.4.1.43.1.12.1.1.12.9.3
         qsimNewFrameRelayVcTable 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1 no-access
Frame relay VC configuration table.
             qsimNewFrameRelayVcEntry 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1 no-access
Frame relay VC configuration entry. The slot number (vcPortSlot) of the VC can be from 4 to maxslots. The port number (vcPortPort) can be from 1 to 4.
                 qsimNewFrameRelayVcInterworking 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.1 integer read-write
Frame Relay/ATM interworking mode. Enumeration: 'network': 1, 'service': 2.
                 qsimNewFrameRelayVcEncapsulation 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.2 integer read-write
Encapsulation type. This object applies ONLY to service interworking. Enumeration: 'translation': 2, 'transparent': 1.
                 qsimNewFrameRelayVcDe2Clp 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.3 integer read-write
If mode 1 mapping is desirable, the user shall select direct mapping. If mode 2 mapping is desirable, the user shall select always-0 or always-1 to map the CLP field to a constant value (0 or 1). Enumeration: 'always-0': 2, 'always-1': 3, 'direct': 1.
                 qsimNewFrameRelayVcClp2De 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.4 integer read-write
For network interworking - The options are none and direct. If mode 1 mapping is desirable, the user shall select direct mapping. If mode 2 mapping is desirable, the user shall select none. The none option maps the DE field in FR-SSCS PDU to the core-Q.922 frame DE field and ignores the CLP field in the ATM cells. For service interworking - The options are direct, always-0 and always-1. If mode 1 mapping is desirable, the user shall select direct mapping. If mode 2 mapping is desirable, the user shall select always-0 or always-1 to map the DE field to a constant value (0 or 1). Enumeration: 'always-0': 3, 'always-1': 4, 'none': 1, 'direct': 2.
                 qsimNewFrameRelayVcFecnToEfci 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.5 integer read-write
This object applies ONLY to service interworking. If mode 1 mapping is desirable, direct mapping should be selected. If mode 2 mapping is desirable, always-0 should be selected to set the EFCI field to 'congestion not experienced'. Enumeration: 'always-0': 2, 'direct': 1.
                 qsimNewFrameRelayVcShapper 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.6 integer read-write
Data rate supported by the frame relay VC. Depending on the type of card a VC is configured, the shapper numbers are assigned as follows: HSIM QSIM data rate data rate shapper number --------- --------- -------------- 1.5m 64k 1 3m 128k 2 4.5m 192k 3 6m 256k 4 7.5m 384k 5 9m 512k 6 10.5m 640k 7 12m 768k 8 13.5m 1m 9 15m 1.5m 10 16.5m 2m 11 18m 4m 12 20m 8m 13
                 qsimNewFrameRelayVcDlci 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.7 integer read-write
Frame relay DLCI.
                 qsimNewFrameRelayVcFrSscsDlci 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.8 integer read-write
This object applies ONLY to network interworking. Its valid value is 16..991 and 1022.
                 qsimNewFrameRelayVcStatus 1.3.6.1.4.1.43.1.12.1.1.12.9.3.1.1.9 integer read-only
Frame relay PVC operational status. Enumeration: 'not-configured': 3, 'in-service': 2, 'out-of-service': 1.