C-PRODUCT-CBR-V35-MIB: View SNMP OID List / Download MIB

VENDOR: 3COM


 Home MIB: C-PRODUCT-CBR-V35-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cbrV35PortConfig 1.3.6.1.4.1.43.1.12.1.1.15.5
     cbrV35PortConfTable 1.3.6.1.4.1.43.1.12.1.1.15.5.1 no-access
This object contains the CBR's V.35 specific port Configuration table. There is one cbrV35PortConfEntry associated for each provisioned CBR port interface within the shelf. This table uses portSlot and portNumber as an index which is defined in the portBaseTable of the C-PRODUCT BASE MIB. This index value uniquely identifies the CBR port interface to which this entry is applicable.
         cbrV35PortConfEntry 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1 no-access
An entry in the CBR specific port Configuration table.
             cbrV35PortConfCableType 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.1 integer read-only
This object indicates the type of cable connected to the port. An error is returned if an access is attempted on a physical interface other than a V.35 port interface. The default value is none (1). Enumeration: 'none': 1, 'dce': 3, 'dte': 2.
             cbrV35PortConfScrClockSource 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.2 integer read-write
This object indicates the SCR clock source. This is aplicable for both DCE & DTE cable types. If the cable type is 'none', a get request returns whatever the value currently stored in the managed node for this port and a set request stores the value. Enumeration: 'adaptive': 2, 'internal': 1.
             cbrV35PortConfTxClockPhase 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.3 integer read-write
This object indicates the type of Transmit clock phase needed to correct the clock out of phase problem. This is aplicable ONLY when a 'dte' cable is connected to the port. The default value is normal (1). Enumeration: 'normal': 1, 'inverted': 2.
             cbrV35PortConfRts 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.4 integer read-only
This object indicates RTS pin status. Default value is off (1). Enumeration: 'on': 2, 'off': 1.
             cbrV35PortConfCts 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.5 integer read-only
This object indicates CTS pin status. Default value is off (1). Enumeration: 'on': 2, 'off': 1.
             cbrV35PortConfDcd 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.6 integer read-only
This object indicates DCD pin status. Default value is off (1). Enumeration: 'on': 2, 'off': 1.
             cbrV35PortConfDsr 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.7 integer read-only
This object indicates DSR pin status. Default value is off (1). Enumeration: 'on': 2, 'off': 1.
             cbrV35PortConfSctClockSource 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.8 integer read-write
This object indicates the type of SCT clock source. This is aplicable for both 'DCE' & 'DTE' cable types. If no cable is attached then it just reflects the value stored in the database. The default value is internal (2). Enumeration: 'internal': 2, 'recovered': 1.
             cbrV35PortConfRxTimingSource 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.9 integer read-write
This object indicates the Serial interface Recieive Timing Source. The default value is dce-transmit-clock. Enumeration: 'dce-transmit-clock': 2, 'echo-clock-from-dte': 1.
             cbrV35PortConfCableID 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.10 integer read-only
This object indicates the type of physical interface. Enumeration: 'none': 1, 'v35': 2, 'rs422': 3.
             cbrV35PortConfLoopBackType 1.3.6.1.4.1.43.1.12.1.1.15.5.1.1.11 integer read-write
This object indicates the type of loopback configured for the specified T1/E1 port interface. Network-line (2) redirects incoming remote traffic back into the network interface at the external edge of the card interface. Network-card (4) regenerates framing information prior to redirecting incoming remote traffic back into the network interface. Local-card (3) redirects local incoming traffic back into the local system. The default value is no-loopback (1). Enumeration: 'no-response': 5, 'local-card': 3, 'network-card': 4, 'no-loopback': 1.