BayNetworks-IISIS-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: BayNetworks-IISIS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfIisisGeneralGroup 1.3.6.1.4.1.18.3.5.3.2.8.1
     wfIisisGeneralDelete 1.3.6.1.4.1.18.3.5.3.2.8.1.1 integer read-write
'This value determines whether I-ISIS is configured' Enumeration: 'deleted': 2, 'created': 1.
     wfIisisGeneralDisable 1.3.6.1.4.1.18.3.5.3.2.8.1.2 integer read-write
'The administrative status of I-ISIS in the router. The value 'enabled' denotes that the I-ISIS Process is active on at least one interface; 'disabled' disables it on all interfaces.' Enumeration: 'disabled': 2, 'enabled': 1.
     wfIisisGeneralState 1.3.6.1.4.1.18.3.5.3.2.8.1.3 integer read-only
'The state of I-ISIS' Enumeration: 'down': 2, 'notpresent': 4, 'up': 1, 'invalid': 3.
     wfIisisRouterId 1.3.6.1.4.1.18.3.5.3.2.8.1.4 octet string read-write
This value contains the system ID of this Intermediate System.
     wfIisisVersion 1.3.6.1.4.1.18.3.5.3.2.8.1.5 displaystring read-only
This read-only parameter identifies the version number of the IS-IS protocol to which this node conforms to.
     wfIisisRouterType 1.3.6.1.4.1.18.3.5.3.2.8.1.6 integer read-write
This value determines whether this system is L1 only router L2 only router or L1-L2 IS. Enumeration: 'l2only': 2, 'l1only': 1, 'l1l2': 3.
     wfIisisSpfHoldDown 1.3.6.1.4.1.18.3.5.3.2.8.1.7 integer read-write
Hold Down Timer for the SPF (in seconds). The SPF will run at most once per hold down timer value. A value of 0 means no hold down.
     wfIisisPrimaryLogMask 1.3.6.1.4.1.18.3.5.3.2.8.1.8 gauge read-write
A parameter to specify which I-ISIS log messages should be logged. This will only effect the Primary I-ISIS gate. Each bit represents a message as defined below. A 1 in that bit location means to log it and a 0 means not to put that log message in the log. Changing this value will NOT restart I-ISIS, but will take effct immediately(if there are any messages to be logged. bit 31 bit 0 +---------------------------------------+ | | +---------------------------------------+ bit0 Trace Messages bit1 INFO Level messages bit2 debug level messages bit3 I-ISIS interface state change messages bit4 Nbr state changes bit5 self-origination of LSA's bit6 receipt of new LSA's bit7 changes to I-ISIS`s Routing Table bit8 Bad LS requests, Ack's, or updates bit9 receipt of less recent LSA's bit10 receipt of more recent self-originated LSA's bit11 receipt of MAxAge LSA's (i.e. LSA's being flushed) bit12 - 31 reserved
     wfIisisMaximumPath 1.3.6.1.4.1.18.3.5.3.2.8.1.9 integer read-write
Maximum number of equal cost paths allowed for a network installed by OSPF.
     wfIisisMaxAreas 1.3.6.1.4.1.18.3.5.3.2.8.1.10 integer read-write
This value defines the maximum allowable number of areas addresses for the domain that this router exists in.
     wfIisisNumL1Lsps 1.3.6.1.4.1.18.3.5.3.2.8.1.11 gauge read-only
Number of L2 LSPS stored in the database
     wfIisisNumL2Lsps 1.3.6.1.4.1.18.3.5.3.2.8.1.12 gauge read-only
Number of L2 LSPS stored in the database
     wfIisisCksumIsPdus 1.3.6.1.4.1.18.3.5.3.2.8.1.13 integer read-write
This value indicates whether ISIS PDUs will carry a checksum. Enumeration: 'disabled': 2, 'enabled': 1.
     wfIisisL1LspPassword 1.3.6.1.4.1.18.3.5.3.2.8.1.14 displaystring read-write
This assigns a password such that only L1 Lsps with the matching password will be accepted. All L1 Lsps generated by this system will contain this string in the password option.
     wfIisisL2LspPassword 1.3.6.1.4.1.18.3.5.3.2.8.1.15 displaystring read-write
This assigns a password such that only L2 Lsps with the matching password will be accepted. All L2 Lsps generated by this system will contain this string in the password option.
     wfIisisAreaAddr 1.3.6.1.4.1.18.3.5.3.2.8.1.16 octet string read-write
This Assigns the area address for this router. This field must be filled in. If the user doesn't enter a value, then assign 0x470005. Site Manager must force the user to enter at least a 3-byte value for this field.
     wfIisisAreaAddrAlias1 1.3.6.1.4.1.18.3.5.3.2.8.1.17 octet string read-write
This Assigns the first area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length.
     wfIisisAreaAddrAlias2 1.3.6.1.4.1.18.3.5.3.2.8.1.18 octet string read-write
This Assigns the second area address alias for this router. This field does no have to be filled in, but if the user tries to enter a value, Site Manager must make sure that it is at least 3-bytes in length.
     wfIisisL1CorruptedLsps 1.3.6.1.4.1.18.3.5.3.2.8.1.19 counter read-only
Number of Corrupted L1-Lsps Detected.
     wfIisisL2CorruptedLsps 1.3.6.1.4.1.18.3.5.3.2.8.1.20 counter read-only
Number of Corrupted L2-Lsps Detected.
     wfIisisL1LspDbOverLoads 1.3.6.1.4.1.18.3.5.3.2.8.1.21 counter read-only
Number of times the L1 Lsp Database Overload event has been generated.
     wfIisisL2LspDbOverLoads 1.3.6.1.4.1.18.3.5.3.2.8.1.22 counter read-only
Number of times the L2Lsp Database Overload event has been generated.
     wfIisisNearestL2Is 1.3.6.1.4.1.18.3.5.3.2.8.1.23 octet string read-only
This is the ID of the nearest L2 system in this area.
     wfIisisNumL1Routes 1.3.6.1.4.1.18.3.5.3.2.8.1.24 gauge read-only
Number of L1 Routes.
     wfIisisNumL2Routes 1.3.6.1.4.1.18.3.5.3.2.8.1.25 gauge read-only
Number of L2 Routes.
     wfIisisMinLSPGenerationInterval 1.3.6.1.4.1.18.3.5.3.2.8.1.26 integer read-write
Min time interval(in secs) before LSP generation
     wfIisisMaxLSPGenerationInterval 1.3.6.1.4.1.18.3.5.3.2.8.1.27 integer read-write
Max time interval(in secs) before LSP generation
     wfIisisMaxAge 1.3.6.1.4.1.18.3.5.3.2.8.1.28 integer read-write
The lifetime of the lsp after which it will be considered expired
     wfIisisMinLSPXmtInterval 1.3.6.1.4.1.18.3.5.3.2.8.1.29 integer read-write
     wfIisisPartialSNPInterval 1.3.6.1.4.1.18.3.5.3.2.8.1.30 integer read-write
     wfIisisZeroAgeLifetime 1.3.6.1.4.1.18.3.5.3.2.8.1.31 integer read-write
If the remaining lifetime of an LSP reaches zero, the expired LSP will be kept in the database for this time (in seconds)
     wfIisisAgePend 1.3.6.1.4.1.18.3.5.3.2.8.1.32 integer read-write
The number of entries processed before this gate pends
     wfIisisCsnpBuildInterval 1.3.6.1.4.1.18.3.5.3.2.8.1.33 integer read-write
The interval at which CSNPs are generated by the Designated IS
     wfIisisL2LspBufferSize 1.3.6.1.4.1.18.3.5.3.2.8.1.34 integer read-write
The max size of the LSP generated by system
     wfIisisL1SpfCnt 1.3.6.1.4.1.18.3.5.3.2.8.1.35 counter read-only
The number of times the L1 I-ISIS SPF algorithm has been run for this area.
     wfIisisL2SpfCnt 1.3.6.1.4.1.18.3.5.3.2.8.1.36 counter read-only
The number of times the L2 I-ISIS SPF algorithm has been run for this area.
 wfIisisAreaTable 1.3.6.1.4.1.18.3.5.3.2.8.2 no-access
-- The I-ISIS Area Data Structure contains information -- regarding the various areas. The interfaces and -- links are configured as part of these areas. -- Area 0.0.0.0, by definition, is the Backbone Area 'Information describing the configured parameters and cumulative statistics of the router's attached areas.' REFERENCE 'I-ISIS Version 2, Section 6 The Area Data Structure'
     wfIisisAreaEntry 1.3.6.1.4.1.18.3.5.3.2.8.2.1 no-access
'Information describing the configured parameters and cumulative statistics of one of the router's attached areas.'
         wfIisisAreaDelete 1.3.6.1.4.1.18.3.5.3.2.8.2.1.1 integer read-write
This value determines if the I-ISIS router is configured with this area. Enumeration: 'deleted': 2, 'created': 1.
         wfIisisAreaDisable 1.3.6.1.4.1.18.3.5.3.2.8.2.1.2 integer read-write
This value indicates the state of this area on the I-ISIS router. Enumeration: 'disabled': 2, 'enabled': 1.
         wfIisisAreaState 1.3.6.1.4.1.18.3.5.3.2.8.2.1.3 integer read-only
This value indicates the state of the I-ISIS Area. Enumeration: 'down': 2, 'up': 1.
         wfIisisAreaId 1.3.6.1.4.1.18.3.5.3.2.8.2.1.4 ipaddress read-only
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the I-ISIS backbone.
         wfIisisSpfCnt 1.3.6.1.4.1.18.3.5.3.2.8.2.1.5 counter read-only
The number of times the I-ISIS SPF algorithm has been run for this area.
 wfIisisL1LspHdrTable 1.3.6.1.4.1.18.3.5.3.2.8.3 no-access
2 u_int32's so the inst_id len is 2.
     wfIisisL1LspHdrEntry 1.3.6.1.4.1.18.3.5.3.2.8.3.1 no-access
A Record in the Level 1 Lsp Header Table
         wfIisisL1LspHdrLspId 1.3.6.1.4.1.18.3.5.3.2.8.3.1.1 octet string read-only
LSPID = Source ID + Pseudo-node ID + LSP number
         wfIisisL1LspHdrLifetime 1.3.6.1.4.1.18.3.5.3.2.8.3.1.2 integer read-only
Lsp Lifetime
         wfIisisL1LspHdrSeqnum 1.3.6.1.4.1.18.3.5.3.2.8.3.1.3 integer read-only
Lsp sequence number
         wfIisisL1LspHdrFlags 1.3.6.1.4.1.18.3.5.3.2.8.3.1.4 integer read-only
Flags: P/ATT/LSPDBOL/IS type
         wfIisisL1LspHdrCksum 1.3.6.1.4.1.18.3.5.3.2.8.3.1.5 octet string read-only
Checksum
 wfIisisL2LspHdrTable 1.3.6.1.4.1.18.3.5.3.2.8.4 no-access
2 u_int32's so the inst_id len is 2.
     wfIisisL2LspHdrEntry 1.3.6.1.4.1.18.3.5.3.2.8.4.1 no-access
A Record in the Lsp Header Table
         wfIisisL2LspHdrLspId 1.3.6.1.4.1.18.3.5.3.2.8.4.1.1 octet string read-only
LSPID = Source ID + Pseudo-node ID + LSP number
         wfIisisL2LspHdrLifetime 1.3.6.1.4.1.18.3.5.3.2.8.4.1.2 integer read-only
Lsp Lifetime
         wfIisisL2LspHdrSeqnum 1.3.6.1.4.1.18.3.5.3.2.8.4.1.3 integer read-only
Lsp sequence number
         wfIisisL2LspHdrFlags 1.3.6.1.4.1.18.3.5.3.2.8.4.1.4 integer read-only
Flags: P/ATT/LSPDBOL/IS type
         wfIisisL2LspHdrCksum 1.3.6.1.4.1.18.3.5.3.2.8.4.1.5 octet string read-only
Checksum
 wfIisisIfTable 1.3.6.1.4.1.18.3.5.3.2.8.5 no-access
-- I-ISIS Interface Table -- The I-ISIS Interface Table augments the ifTable with I-ISIS -- specific information. 'The I-ISIS Interface Table describes the interfaces from the viewpoint of I-ISIS.'
     wfIisisIfEntry 1.3.6.1.4.1.18.3.5.3.2.8.5.1 no-access
'The I-ISIS Interface Entry describes one interface from the viewpoint of I-ISIS.'
         wfIisisIfDelete 1.3.6.1.4.1.18.3.5.3.2.8.5.1.1 integer read-write
This variable determines in an I-ISIS Interface has been configured on the router. Enumeration: 'deleted': 2, 'created': 1.
         wfIisisIfDisable 1.3.6.1.4.1.18.3.5.3.2.8.5.1.2 integer read-write
'The I-ISIS interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to I-ISIS.' Enumeration: 'disabled': 2, 'enabled': 1.
         wfIisisIfIpAddress 1.3.6.1.4.1.18.3.5.3.2.8.5.1.3 ipaddress read-only
'The IP address of this I-ISIS interface.'
         wfIisisAddressLessIf 1.3.6.1.4.1.18.3.5.3.2.8.5.1.4 integer read-only
'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.'
         wfIisisIfRouterLevel 1.3.6.1.4.1.18.3.5.3.2.8.5.1.5 integer read-write
This is the level protocol that the circuit runs. Its a bit mask to allow for some combination of L1, L2, External, ES-IS-only. Enumeration: 'l1l2': 3, 'ext': 4, 'l2': 2, 'l2ext': 6, 'l1': 1, 'esisonly': 8, 'l1l2ext': 7.
         wfIisisIfL1DefaultMetric 1.3.6.1.4.1.18.3.5.3.2.8.5.1.6 integer read-write
This is the default cost of using this circuit for L1 traffic.
         wfIisisIfL2DefaultMetric 1.3.6.1.4.1.18.3.5.3.2.8.5.1.7 integer read-write
This is the default cost of using this circuit for L2 traffic.
         wfIisisIfL1DrPriority 1.3.6.1.4.1.18.3.5.3.2.8.5.1.8 integer read-write
This is the priority for this system to become L1 designated router on this LAN circuit.
         wfIisisIfL2DrPriority 1.3.6.1.4.1.18.3.5.3.2.8.5.1.9 integer read-write
This is the priority for this system to become L2 designated router on this LAN circuit.
         wfIisisIfHelloTimer 1.3.6.1.4.1.18.3.5.3.2.8.5.1.10 integer read-write
This is the period (secs) between IIH hello transmissions.
         wfIisisIfPassword 1.3.6.1.4.1.18.3.5.3.2.8.5.1.11 displaystring read-write
This is Circuit Password for this circuit. Used to filter out Hellos from systems without the correct password.
         wfIisisIfHelloMtuSize 1.3.6.1.4.1.18.3.5.3.2.8.5.1.12 integer read-write
Configure Hello MTU size per I-ISIS interface This parameter has the following values/meanings: 1 - Use the MTU specified by IP 2 - Use the MTU of ethernet, regardless of what IP says > 2 - Use this value as the actual MTU. If the value is smaller than what I-ISIS needs as a minimum then the mtu specified by IP is used. For example, 3 would never be used as an MTU.
         wfIisisIfIihHoldMultiplier 1.3.6.1.4.1.18.3.5.3.2.8.5.1.13 integer read-write
This is the multiplier value used to compute the hold time set in the IIH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier.
         wfIisisIfIshHoldMultiplier 1.3.6.1.4.1.18.3.5.3.2.8.5.1.14 integer read-write
This is the multiplier value used to compute the hold time set in the ISH PDUs transmitted from this router. Hold time equals IIH Timer times IIH Hold Multiplier.
         wfIisisIfType 1.3.6.1.4.1.18.3.5.3.2.8.5.1.15 integer read-write
The IISIS interface type. Enumeration: 'broadcast': 1, 'pointtopoint': 2.
         wfIisisIfCsnpTimer 1.3.6.1.4.1.18.3.5.3.2.8.5.1.16 integer read-write
This is the period (in seconds) between CSNP transmissions.
 wfIisisIfStatsTable 1.3.6.1.4.1.18.3.5.3.2.8.6 no-access
-- I-ISIS Interface Stats Table.
     wfIisisIfStatsEntry 1.3.6.1.4.1.18.3.5.3.2.8.6.1 no-access
'The information regarding a interface'.
         wfIisisIfStatsIpAddress 1.3.6.1.4.1.18.3.5.3.2.8.6.1.1 ipaddress read-only
'The IP address of this I-ISIS interface.'
         wfIisisStatsAddressLessIf 1.3.6.1.4.1.18.3.5.3.2.8.6.1.2 integer read-only
'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.'
         wfIisisIfStatsState 1.3.6.1.4.1.18.3.5.3.2.8.6.1.3 integer read-only
This indicates whether the circuit state is up or down. Enumeration: 'down': 2, 'up': 1.
         wfIisisIfStatsCct 1.3.6.1.4.1.18.3.5.3.2.8.6.1.4 integer read-only
A unique value for each known circuit.
         wfIisisIfStatsL1TxHellos 1.3.6.1.4.1.18.3.5.3.2.8.6.1.5 counter read-only
Number of I-ISIS Hello packets transmitted.
         wfIisisIfStatsL2TxHellos 1.3.6.1.4.1.18.3.5.3.2.8.6.1.6 counter read-only
Number of I-ISIS Hello packets transmitted.
         wfIisisIfStatsL1RxHellos 1.3.6.1.4.1.18.3.5.3.2.8.6.1.7 counter read-only
Number of I-ISIS Hello packets received.
         wfIisisIfStatsL2RxHellos 1.3.6.1.4.1.18.3.5.3.2.8.6.1.8 counter read-only
Number of I-ISIS Hello packets received.
         wfIisisIfStatsL1Drops 1.3.6.1.4.1.18.3.5.3.2.8.6.1.9 counter read-only
Number of I-ISIS packets dropped because of invalid information in the packet.
         wfIisisIfStatsL2Drops 1.3.6.1.4.1.18.3.5.3.2.8.6.1.10 counter read-only
Number of I-ISIS packets dropped because of invalid information in the packet.
         wfIisisIfStatsL1DesignatedRouter 1.3.6.1.4.1.18.3.5.3.2.8.6.1.11 octet string read-only
This is the ID of the L1 Designated Router on this circuit.
         wfIisisIfStatsL2DesignatedRouter 1.3.6.1.4.1.18.3.5.3.2.8.6.1.12 octet string read-only
This is the ID of the L2 Designated Router on this circuit.
         wfIisisIfStatsTxL1Lsp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.13 counter read-only
Number of L1 LSPs(Link State Packet) transmitted.
         wfIisisIfStatsTxL2Lsp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.14 counter read-only
Number of L2 LSPs(Link State Packet) transmitted.
         wfIisisIfStatsTxL1Csnp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.15 counter read-only
Number of L1 CSNPs(Complete sequence no. packet) transmitted.
         wfIisisIfStatsTxL2Csnp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.16 counter read-only
Number of L2 CSNPs(Complete sequence no. packet) transmitted.
         wfIisisIfStatsTxL1Psnp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.17 counter read-only
Number of L1 PSNPs(Partial sequence no. packet) transmitted.
         wfIisisIfStatsTxL2Psnp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.18 counter read-only
Number of L2 PSNPs(Partial sequence no. packet) transmitted.
         wfIisisIfStatsRxL1Lsp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.19 counter read-only
Number of L1 LSPs(Link State Packet) received.
         wfIisisIfStatsRxL2Lsp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.20 counter read-only
Number of L2 LSPs(Link State Packet) received.
         wfIisisIfStatsRxL1Csnp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.21 counter read-only
Number of L1 CSNPs(Complete sequence no. packet) received.
         wfIisisIfStatsRxL2Csnp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.22 counter read-only
Number of L2 CSNPs(Complete sequence no. packet) received.
         wfIisisIfStatsRxL1Psnp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.23 counter read-only
Number of L1 PSNPs(Partial sequence no. packet) received.
         wfIisisIfStatsRxL2Psnp 1.3.6.1.4.1.18.3.5.3.2.8.6.1.24 counter read-only
Number of L2 PSNPs(Partial sequence no. packet) received.
         wfIisisIfStatsL1NbrCount 1.3.6.1.4.1.18.3.5.3.2.8.6.1.25 gauge read-only
Count of neighbors with any state.
         wfIisisIfStatsL2NbrCount 1.3.6.1.4.1.18.3.5.3.2.8.6.1.26 gauge read-only
Count of neighbors with any state.
         wfIisisIfStatsL1AdjCount 1.3.6.1.4.1.18.3.5.3.2.8.6.1.27 gauge read-only
Count of neighbors with state UP.
         wfIisisIfStatsL2AdjCount 1.3.6.1.4.1.18.3.5.3.2.8.6.1.28 gauge read-only
Count of neighbors with state UP.
 wfIisisDynNbrTable 1.3.6.1.4.1.18.3.5.3.2.8.7 no-access
-- I-ISIS Dynamic Neighbor Table The I-ISIS Dynamic Neighbor Table describes all neighbors in the locality of the subject router learned during operation.
     wfIisisDynNbrEntry 1.3.6.1.4.1.18.3.5.3.2.8.7.1 no-access
'The information regarding a single neighbor.' REFERENCE 'I-ISIS Version 2, Section 10 The Neighbor Data Structure'
         wfIisisDynNbrState 1.3.6.1.4.1.18.3.5.3.2.8.7.1.1 integer read-only
'The State of the relationship with this Neighbor.' Enumeration: 'down': 1, 'init': 2, 'up': 3.
         wfIisisDynNbrIpAddr 1.3.6.1.4.1.18.3.5.3.2.8.7.1.2 ipaddress read-only
'The IP address of this neighbor.'
         wfIisisDynNbrIfAddr 1.3.6.1.4.1.18.3.5.3.2.8.7.1.3 ipaddress read-only
'Our Interface IP address for this neighbor.'
         wfIisisDynNbrAddressLessIndex 1.3.6.1.4.1.18.3.5.3.2.8.7.1.4 integer read-only
'The circuit over which this neighbor is learnt.'
         wfIisisDynNbrRtrId 1.3.6.1.4.1.18.3.5.3.2.8.7.1.5 octet string read-only
'A 6 byte field representing the Intermediate system Id.'
         wfIisisDynNbrDatabase 1.3.6.1.4.1.18.3.5.3.2.8.7.1.6 integer read-only
Database into which the Adjacency is stored, 1=ES, 2=Level 1 IS, 3=Level 2 IS.
         wfIisisDynNbrType 1.3.6.1.4.1.18.3.5.3.2.8.7.1.7 integer read-only
The type of adjacency. Enumeration: 'broadcast': 1, 'pointtopoint': 2.
         wfIisisDynNbrPseudonodeId 1.3.6.1.4.1.18.3.5.3.2.8.7.1.8 integer read-only
A unique value for each known circuit.
         wfIisisDynNbrHoldTime 1.3.6.1.4.1.18.3.5.3.2.8.7.1.9 integer read-only
Hold Time received from neighbor.
         wfIisisDynNbrPriority 1.3.6.1.4.1.18.3.5.3.2.8.7.1.10 integer read-only
Priority to become designated router. IS only.
         wfIisisDynNbrSnpaAddr 1.3.6.1.4.1.18.3.5.3.2.8.7.1.11 octet string read-only
SNPA address for neighbor.
         wfIisisDynNbrLanId 1.3.6.1.4.1.18.3.5.3.2.8.7.1.12 octet string read-only
LAN ID of Designated IS of this interface.