BROCADE-QOS-MIB: View SNMP OID List / Download MIB

VENDOR: BROCADE


 Home MIB: BROCADE-QOS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, FOUNDRY-SN-SWITCH-GROUP-MIB, SNMPv2-SMI, FOUNDRY-SN-ROOT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 brcdQosMIB 1.3.6.1.4.1.1991.1.1.14.1
The MIB module contains the managed object definition for Brocade Quality of Service. Supported Platforms: - supported on NetIron XMR/MLX latforms. Copyright 1996-2012 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
     brcdHqosObjects 1.3.6.1.4.1.1991.1.1.14.1.1
         brcdHqosStatsTable 1.3.6.1.4.1.1991.1.1.14.1.1.1 no-access
A list of brcHqosStats entries. This table contains information of various HQoS counters. The HQoS is supported on NI-MLX-10Gx8-M/D LP modules.
             brcdHqosStatsEntry 1.3.6.1.4.1.1991.1.1.14.1.1.1.1 no-access
An entry containing Hqos statistics counter information applicable for 10Gx8 interface if the module is physically present.
                 brcdHqosIfIndex 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.1 interfaceindex no-access
The index of the interface index where the HQoS is configured. The LP module must be physically present and operationally up.
                 brcdHqosEndpointType 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.2 integer no-access
This object specifies the End point type for HQoS scheduler. Enumeration: 'bVlanIsid': 4, 'other': 1, 'doubleTaggedVlan': 3, 'singleTaggedVlan': 2.
                 brcdHqosEndpointTag 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.3 unsigned32 no-access
This object specifies the HQoS end point tag. If the brcdHqosEndpointType is other(1), then this object has zero value. If the brcdHqosEndpointType is singleTaggedVlan(2), dougleTaggedVlan(3) or bVlanIsid(4), then this object has VLAN id. The valid VLAN ids are 1 to 4094.
                 brcdHqosEndpointInnerTag 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.4 unsigned32 no-access
This object specifies the HQoS end point inner tag. If the brcdHqosEndpointType is other(1) or singleTaggedVlan(2) then this object has zero value. If the brcdHqosEndpointType is dougleTaggedVlan(3) then this object has VLAN id. The valid VLAN ids are 1 to 4094 If the index brcdHqosEndpointType is bVlanIsid(4), then this object has ISID value. The valid ISID are 256 to 16777214.
                 brcdHqosStatsPriority 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.5 portprioritytc no-access
The priority of the packets that will be stored in this queue. This is 1-based index. The HQoS queue with brcdHqosEndpointType as other(1) have 8 priorities. All other HQoS queues have 4 priorities, two consecutive priorities are stored in one queue. In this case, the valid values for this index are 1, 3, 5 and 7. The queue with priority 1 has the packets with priority 1 and 2. Same applies for priority 3, 5 and 7
                 brcdHqosStatsDescription 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.6 displaystring read-only
This object gives the HQoS scheduler node name in full path format with each node separated by dot.
                 brcdHqosStatsEnquePkts 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.7 counter64 read-only
A count of all packets entering ingress queues on this queue.
                 brcdHqosStatsEnqueBytes 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.8 counter64 read-only
A count of all bytes entering ingress queues on this queue.
                 brcdHqosStatsDequePkts 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.9 counter64 read-only
A count of all packets dequeued from ingress queues and forwarded on this queue.
                 brcdHqosStatsDequeBytes 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.10 counter64 read-only
A count of all bytes dequeued from ingress queues and forwarded on this queue.
                 brcdHqosStatsTotalDiscardPkts 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.11 counter64 read-only
A count of all packets failing to enter ingress queues on this queue. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering.
                 brcdHqosStatsTotalDiscardBytes 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.12 counter64 read-only
A count of all bytes failing to enter ingress queues on this queue. This may be due to: * The queue reaching its maximum depth, WRED, or other reasons. * The network processor deciding to drop packets for reasons including: an unknown Layer-3 route, RPF, or segment filtering
                 brcdHqosStatsOldestDiscardPkts 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.13 counter64 read-only
A count of all packets entering ingress queues on this queue, but deleted afterwards due to buffer full.
                 brcdHqosStatsOldestDiscardBytes 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.14 counter64 read-only
A count of all bytes entering ingress queues on this queue, but deleted afterwards due to buffer full
                 brcdHqosStatsWREDDroppedPkts 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.15 counter64 read-only
A count of all bytes entering ingress queues on this queue, but deleted afterwards due to buffer full
                 brcdHqosStatsWREDDroppedBytes 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.16 counter64 read-only
A count of all bytes entering ingress queues on this queue, but deleted afterwards due to buffer full
                 brcdHqosStatsCurrentQDepth 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.17 counter64 read-only
The current queue depth.
                 brcdHqosStatsMaxQDepthSinceLastRead 1.3.6.1.4.1.1991.1.1.14.1.1.1.1.18 counter64 read-only
The maximum queue depth since last access to read.