BLADETYPE6-NETWORK-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: BLADETYPE6-NETWORK-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpProLiant_GbE2c_10G_InterconnectSwitch 1.3.6.1.4.1.11.2.3.7.11.33.6.1.1
 agent 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1
     agentConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1
         agSystem 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1
             agApplyConfiguration 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.2 integer read-write
This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read. Enumeration: 'apply': 2, 'other': 1.
             agSavePending 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.3 integer read-only
This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash. Enumeration: 'noSaveNeeded': 2, 'saveNeeded': 1.
             agSaveConfiguration 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.4 integer read-write
This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read. Enumeration: 'notSaveActive': 3, 'ok': 1, 'saveActive': 2.
             agRevert 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.5 integer read-write
This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read. Enumeration: 'other': 1, 'revert': 2.
             agRevertApply 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.6 integer read-write
This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read. Enumeration: 'revertApply': 2, 'other': 1.
             agReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.7 integer read-write
This is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)... Enumeration: 'warmReset': 3, 'other': 1, 'coldReset': 2.
             agConfigForNxtReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.8 integer read-write
The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block Enumeration: 'active': 2, 'default': 4, 'backup': 3.
             agImageForNxtReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.9 integer read-write
The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 Enumeration: 'image2': 3, 'image1': 2.
             agSoftwareVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.10 displaystring read-only
The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available.
             agBootVer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.11 displaystring read-only
The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
             agImage1Ver 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.12 displaystring read-only
The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
             agImage2Ver 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.13 displaystring read-only
The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.
             agRtcDate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.14 displaystring read-write
The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
             agRtcTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.15 displaystring read-write
The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.
             agLastSetErrorReason 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.16 displaystring read-only
The error reason of the last SET failure.
             agCurCfgHttpServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.17 integer read-only
The TCP port number that the HTTP server is listening to in the current_configuration block.
             agNewCfgHttpServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.18 integer read-write
The TCP port number that the HTTP server is listening to in the new_configuration block.
             agCurCfgLoginBanner 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.19 displaystring read-only
The user defined login banner.
             agNewCfgLoginBanner 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.20 displaystring read-write
The user defined login banner.
             agCurCfgConsole 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.23 integer read-only
Enable or disable console output of syslog messages. Enumeration: 'disabled': 2, 'enabled': 1.
             agNewCfgConsole 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.24 integer read-write
Enable or disable console output of syslog messages. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgBootp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.29 integer read-only
Enable or disable the use of BootP, as currently configured in the current_configuration block. Enumeration: 'disabled': 3, 'enabled': 2.
             agNewCfgBootp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.30 integer read-write
Enable or disable the use of BootP, in the new_configuration block. Enumeration: 'disabled': 3, 'enabled': 2.
             agSlotNumber 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.31 integer read-only
Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning.
             agCurCfgSnmpTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.32 integer read-only
Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.
             agNewCfgSnmpTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.33 integer read-write
Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.
             agCurCfgTelnetServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.34 integer read-only
The TCP port number that the telnet server listens for telnet sessions.
             agNewCfgTelnetServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.35 integer read-write
The TCP port number that the telnet server listens for telnet sessions.
             agClearFlashDump 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.36 integer read-write
This is an action object to clear the FLASH dump. ok(1) is returned when this object is read. Enumeration: 'clear': 2, 'ok': 1.
             agRackId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.37 displaystring read-only
The rack unique identifier.
             agChassis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.38 displaystring read-only
Chassis serial number.
             agCurCfgTftpServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.39 integer read-only
The TCP port number that the TFTP server is listening to in the current_configuration block.
             agNewCfgTftpServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.40 integer read-write
The TCP port number that the TFTP server is listening to in the new_configuration block.
             agCurCfgHttpsServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.49 integer read-only
The TCP port number that the HTTPS server is listening to in the current_configuration block.
             agNewCfgHttpsServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.50 integer read-write
The TCP port number that the HTTPS server is listening to in the new_configuration block.
             agCurDaylightSavings 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.51 integer read-only
The daylight savings location. Enumeration: 'africa-Mali-SouthWestMali': 29, 'asia-Bhutan': 187, 'asia-Russia-Moscow04YeniseiRiver': 239, 'pacificOcean-USMinorOutlyingIslands-WakeIsland': 418, 'americas-Suriname': 142, 'americas-NetherlandsAntilles': 132, 'asia-Russia-Moscow-01Kaliningrad': 233, 'africa-Niger': 35, 'africa-Tunisia': 50, 'americas-Martinique': 122, 'americas-Antigua-Barbuda': 56, 'antarctica-DavisStationVestfoldHills': 175, 'americas-Mexico-CentTime-CampecheYucatan': 125, 'pacificOceanUSA-CentTime': 402, 'europe-Spain-CeutaAndMelilla': 338, 'pacificOcean-FrenchPolynesia-SocietyIslands': 365, 'americas-Per': 136, 'europe-Russia-Moscow01CaspianSea': 322, 'africa-Guinea-Bissa': 23, 'europe-Portugal-MadeiraIslands': 317, 'europe-Croatia': 293, 'asia-Jordan': 208, 'asia-Georgia': 197, 'asia-Tajikistan': 252, 'americas-Anguilla': 55, 'pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck': 412, 'australia-WesternAustralia': 283, 'europe-Romania': 319, 'indianOcean-Reunion': 358, 'australia-Victoria': 276, 'americas-Panama': 134, 'asia-Philippines': 231, 'asia-Kazakhstan-WestKazakhstan': 213, 'americas-Brazil-Acre': 79, 'pacificOcean-Kiribati-PhoenixIslands': 370, 'americas-Venezuela': 168, 'arcticOcean-JanMayen': 181, 'africa-Zimbabwe': 54, 'asia-Iraq': 205, 'asia-Iran': 204, 'asia-Uzbekistan-EastUzbekistan': 257, 'asia-Mongolia-MostLocations': 223, 'africa-Somalia': 41, 'asia-Russia-Moscow02Urals': 236, 'atlanticOcean-Bermuda': 260, 'asia-Mongolia-DornodSukhbaatar': 225, 'africa-Namibia': 34, 'americas-Brazil-SSEBrazil': 73, 'asia-Indonesia-EastSouthBorneoBaliWestTimor': 202, 'indianOcean-Mauritius': 356, 'pacificOcean-Guam': 368, 'indianOcean-ChristmasIsland': 350, 'europe-Greece': 301, 'americas-USA-EastTime-KentuckyLouisvilleArea': 147, 'asia-China-CentralChinaGansuGuizhouSichuanYunnan': 192, 'americas-Canada-AtlanTime-ELabrador': 82, 'europe-Luxembourg': 308, 'europe-VaticanCity': 347, 'pacificOceanUSA-AleutianIslands': 414, 'africa-Tanzania': 48, 'americas-Canada-CenTime-ManitobaWestOntario': 88, 'americas-USA-CentTime': 153, 'pacificOceanUSA-CentTime-MichiganWisconsinborder': 403, 'europe-Malta': 310, 'asia-Afghanistan': 182, 'europe-Russia-Moscow04YeniseiRiver': 326, 'atlanticOcean-Spain-CanaryIslands': 271, 'asia-Russia-Moscow06LenaRiver': 241, 'africa-Morocco': 32, 'pacificOcean-Micronesia-PonapeOrPohnpei': 376, 'europe-Gibraltar': 300, 'americas-StPierreAndMiquelon': 140, 'none': 0, 'australia-NorthernTerritory': 282, 'australia-NewSouthWales-Yancowinna': 278, 'europe-Russia-Moscow06LenaRiver': 328, 'asia-SaudiArabia': 247, 'africa-Spain-CanaryIslands': 45, 'europe-Ukraine-Zaporozhye-ELugansk': 345, 'americas-Chile-MostLocation': 101, 'americas-Mexico-CentTime-QuintanaRoo': 124, 'europe-Estonia': 296, 'africa-Burkina-Faso': 5, 'pacificOcean-Tokela': 391, 'pacificOcean-PapuaNewGuinea': 386, 'asia-Armenia': 183, 'americas-USA-EastStdTime-IndianaCrawfordCounty': 150, 'indianOcean-Seychelles': 359, 'pacificOcean-Niue': 382, 'europe-Moldova': 311, 'americas-Canada-CenTime-RainyRiver': 89, 'indianOcean-FrenchSouthernAndAntarcticLands': 353, 'pacificOcean-USMinorOutlyingIslands-JohnstonAtoll': 416, 'africa-SaoTome-And-Principe': 38, 'asia-Kazakhstan-AtyrauMangghysta': 212, 'asia-Korea-South': 215, 'asia-Kuwait': 216, 'pacificOcean-FrenchPolynesia-GambierIslands': 367, 'americas-Jamaica': 121, 'europe-Netherlands': 313, 'africa-Kenya': 24, 'africa-Djibouti': 14, 'americas-StKittsAndNevis': 138, 'americas-TrinidadAndTobago': 143, 'americas-Brazil-WParaRondonia': 75, 'atlanticOcean-FaeroeIslands': 262, 'atlanticOcean-StHelena': 272, 'australia-Tasmania': 275, 'americas-Canada-NewfoundlandIsland': 80, 'africa-Senegal': 39, 'americas-Brazil-AlagoasSergipe': 72, 'europe-Spain-Mainland': 337, 'pacificOcean-NorfolkIsland': 383, 'americas-Canada-EastStdTime-EastNunavut': 86, 'americas-Canada-EastTime-OntarioMostlocation': 83, 'europe-Belgium': 288, 'americas-USA-AleutianIslands': 165, 'europe-Andorra': 285, 'indianOcean-CocosOrKeelingIslands': 351, 'europe-Albania': 284, 'africa-Botswana': 4, 'europe-Portugal-Azores': 318, 'atlanticOcean-Portugal-MadeiraIslands': 266, 'americas-USA-AlaskaTime-AlaskaPanhandleNeck': 163, 'europe-Russia-Moscow03Novosibirsk': 325, 'africa-Equatorial-Guinea': 16, 'pacificOceanUSA-AlaskaTime': 410, 'asia-China-SouthwestXinjiangUyghur': 194, 'asia-Russia-Moscow07SakhalinIsland': 243, 'africa-Mozambique': 33, 'europe-France': 298, 'americas-Bolivia': 66, 'americas-Montserrat': 131, 'americas-Brazil-NEBrazil': 69, 'pacificOceanUSA-EastTime-KentuckyLouisvilleArea': 396, 'indianOcean-Madagascar': 354, 'asia-India': 199, 'pacificOcean-Kiribati-GilbertIslands': 369, 'africa-Congo-Rep': 12, 'pacificOcean-Kiribati-LineIslands': 371, 'africa-Lesotho': 25, 'americas-USA-CentTime-NorthDakotaOliverCounty': 155, 'asia-Israel': 206, 'europe-Switzerland': 341, 'europe-Ukraine-MostLocations': 343, 'americas-Mexico-MountStdTime-Sonora': 129, 'asia-Russia-Moscow03Novosibirsk': 238, 'africa-Libya': 27, 'africa-Spain-CeutaMelilla': 44, 'asia-Yemen': 259, 'pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty': 401, 'americas-StVincent': 141, 'pacificOcean-Vanuat': 419, 'americas-Canada-MountTime-WestNorthwestTerritories': 95, 'pacificOceanUSA-PacificTime': 409, 'americas-Canada-EastTime-ThunderBay': 84, 'australia-LordHoweIsland': 274, 'atlanticOcean-Portugal-Azores': 267, 'africa-Zambia': 53, 'asia-Indonesia-WestCentralBorneo': 201, 'pacificOcean-Micronesia-Yap': 374, 'asia-Russia-Moscow01CaspianSea': 235, 'americas-Argentina-Mendoza': 61, 'asia-Syria': 250, 'asia-Thailand': 253, 'americas-Canada-CenStdTime-SaskatchewanMidwest': 92, 'americas-Guyana': 118, 'europe-Russia-Moscow09Kamchatka': 332, 'asia-Russia-Moscow10BeringSea': 246, 'africa-Mali-NorthEastMali': 30, 'americas-USA-EastStdTime-IndianaMostLocations': 149, 'americas-USA-EastTime': 145, 'pacificOcean-Ecuador': 363, 'americas-Honduras': 120, 'americas-Greenland-EastCoastNorthScoresbysund': 112, 'asia-Uzbekistan-WestUzbekistan': 256, 'africa-Malawi': 28, 'americas-Brazil-WAmazonas': 78, 'europe-Slovenia': 336, 'africa-Spain-Mainland': 43, 'americas-Brazil-AmapaEPara': 68, 'americas-Canada-PacificTime-WestBritishColumbia': 97, 'europe-Russia-Moscow00WestRussia': 321, 'europe-CzechRepublic': 294, 'asia-Russia-Moscow07AmurRiver': 242, 'asia-Brunei': 188, 'pacificOcean-NewZealand-MostLocations': 380, 'asia-Cyprus': 195, 'asia-Kyrgyzstan': 217, 'americas-Guatemala': 117, 'americas-USA-AlaskaTime-AlaskaPanhandle': 162, 'europe-Denmark': 295, 'europe-Spain-CanaryIslands': 339, 'europe-Poland': 315, 'africa-Egypt': 15, 'pacificOcean-SolomonIslands': 390, 'pacificOceanUSA-EastStdTime-IndianaMostLocations': 398, 'americas-USA-MountStdTime-Arizona': 159, 'antarctica-McMurdoStationRossIsland': 171, 'americas-Canada-PacificTime-SouthYukon': 98, 'antarctica-SyowaStationEOngulI': 179, 'americas-Bahamas': 63, 'pacificOceanUSA-EastTime-KentuckyWayneCounty': 397, 'asia-Myanmar': 226, 'americas-Greenland-MostLocation': 111, 'americas-Mexico-MountTime-Chihuahua': 128, 'americas-VirginIslands-UK': 169, 'pacificOcean-Chile-EasterIslandSalayGomez': 361, 'americas-USA-EastStdTime-IndianaSwitzerlandCounty': 152, 'americas-USA-EastTime-MichiganMostLocation': 146, 'pacificOcean-MarshallIslands-Kwajalein': 373, 'africa-Chad': 9, 'americas-VirginIslands-US': 170, 'asia-Azerbaijan': 184, 'africa-Gabon': 19, 'antarctica-PalmerStationAnversIsland': 173, 'arcticOcean-Svalbard': 180, 'asia-Russia-Moscow09Kamchatka': 245, 'asia-Maca': 220, 'africa-SouthAfrica': 42, 'asia-Bahrain': 185, 'americas-Dominica': 106, 'australia-SouthAustralia': 281, 'americas-Aruba': 62, 'africa-Cote-dIvoire': 13, 'asia-China-Heilongjiang': 191, 'africa-Central-African-Rep': 8, 'pacificOcean-Chile-MostLocations': 360, 'antarctica-Amundsen-ScottStationSouthPole': 172, 'americas-Uruguay': 167, 'europe-Russia-Moscow02Urals': 323, 'europe-Ireland': 303, 'pacificOcean-FrenchPolynesia-MarquesasIslands': 366, 'pacificOcean-Pitcairn': 387, 'europe-Britain-UKGreatBritain': 290, 'americas-Mexico-CentTime-Mostlocations': 123, 'americas-Brazil-Tocantins': 71, 'asia-China-EastChinaBeijingGuangdongShanghai': 190, 'antarctica-MawsonStationHolmeBay': 174, 'atlanticOcean-Svalbard-JanMayen': 273, 'asia-Nepal': 227, 'africa-Angola': 2, 'asia-Palestine': 230, 'indianOcean-Mayotte': 357, 'africa-Burundi': 6, 'pacificOceanUSA-MountTime-SouthIdahoAndEastOregon': 406, 'asia-UnitedArabEmirates': 255, 'asia-Oman': 228, 'pacificOceanUSA-AlaskaTime-AlaskaPanhandle': 411, 'asia-China-TibetmostofXinjiangUyghur': 193, 'europe-SanMarino': 334, 'europe-Belarus': 287, 'europe-Slovakia': 335, 'pacificOcean-WallisAndFutuna': 420, 'americas-Brazil-EAmazonas': 77, 'europe-Ukraine-Ruthenia': 344, 'americas-Colombia': 103, 'asia-Kazakhstan-QyzylordaKyzylorda': 210, 'asia-Russia-Moscow03WestSiberia': 237, 'africa-Sudan': 46, 'europe-Turkey': 342, 'pacificOcean-NewCaledonia': 379, 'africa-Togo': 49, 'europe-Latvia': 305, 'europe-Liechtenstein': 306, 'europe-Austria': 286, 'africa-Ethiopia': 18, 'americas-DominicanRepublic': 107, 'asia-Russia-Moscow05LakeBaikal': 240, 'asia-Indonesia-IrianJayaAndMoluccas': 203, 'americas-Grenada': 115, 'americas-USA-EastTime-KentuckyWayneCounty': 148, 'atlanticOcean-CapeVerde': 261, 'americas-FrenchGuiana': 110, 'africa-Algeria': 1, 'americas-USA-MountTime-SouthIdahoAndEastOregon': 157, 'pacificOcean-Fiji': 364, 'asia-Taiwan': 251, 'europe-Monaco': 312, 'pacificOceanUSA-AlaskaTime-WestAlaska': 413, 'europe-BosniaHerzegovina': 289, 'europe-Macedonia': 309, 'americas-Nicaragua': 133, 'americas-Argentina-Jujuy': 59, 'americas-USA-Hawaii': 166, 'africa-Liberia': 26, 'atlanticOcean-FalklandIslands': 263, 'americas-Canada-CenStdTime-SaskatchewanMostlocation': 91, 'pacificOceanUSA-MountTime': 405, 'africa-Uganda': 51, 'asia-Japan': 207, 'africa-Swaziland': 47, 'americas-Brazil-Pernambuco': 70, 'antarctica-CaseyStationBaileyPeninsula': 176, 'asia-Vietnam': 258, 'africa-SierraLeone': 40, 'americas-Canada-EastStdTime-CenNunavut': 87, 'australia-NewSouthWales-MostLocations': 277, 'pacificOceanUSA-EastStdTime-IndianaStarkeCounty': 400, 'americas-CaymanIslands': 100, 'asia-Pakistan': 229, 'pacificOcean-USMinorOutlyingIslands-MidwayIslands': 417, 'asia-Kazakhstan-MostLocations': 209, 'africa-Mauritania': 31, 'europe-Britain-UKNorthernIreland': 291, 'africa-Nigeria': 36, 'pacificOceanUSA-MountTime-Navajo': 407, 'americas-CostaRica': 104, 'asia-Lebanon': 219, 'americas-Canada-AtlanTime-NovaScotia': 81, 'australia-Queensland-MostLocations': 279, 'europe-Russia-Moscow-01Kaliningrad': 320, 'americas-Canada-MountStdTime-EastBritishColumbia': 96, 'africa-Western-Sahara': 52, 'pacificOcean-Tuval': 393, 'americas-USA-AlaskaTime': 161, 'atlanticOcean-Iceland': 264, 'americas-Mexico-CentTime-CoahDurangoNLTamaulipas': 126, 'asia-Korea-North': 214, 'americas-Brazil-MatoGrossoDoSul': 74, 'africa-Guinea': 22, 'asia-Kazakhstan-Aqtobe': 211, 'pacificOcean-SamoaWestern': 389, 'europe-Russia-Moscow03WestSiberia': 324, 'pacificOceanUSA-EastTime-MichiganMostLocations': 395, 'pacificOcean-CookIslands': 362, 'atlanticOcean-Spain-CeutaMelilla': 270, 'atlanticOcean-SouthGeorgia-SouthSandwichIslands': 268, 'americas-PuertoRico': 137, 'asia-Malaysia-PeninsularMalaysia': 221, 'pacificOcean-MarshallIslands-MostLocations': 372, 'asia-Indonesia-JavaAndSumatra': 200, 'pacificOceanUSA-MountStdTime-Arizona': 408, 'americas-Greenland-ThulePituffik': 114, 'asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan': 224, 'americas-Belize': 65, 'americas-Canada-PacificTime-NorthYukon': 99, 'americas-USA-MountTime-Navajo': 158, 'americas-Canada-EastStdTime-PangnirtungNunavut': 85, 'antarctica-Dumont-dUrvilleBaseTerreAdelie': 178, 'pacificOceanUSA-EastStdTime-IndianaCrawfordCounty': 399, 'asia-Cambodia': 189, 'americas-Haiti': 119, 'asia-SriLanka': 249, 'europe-Portugal-Mainland': 316, 'indianOcean-Comoros': 352, 'asia-Qatar': 232, 'americas-Barbados': 64, 'americas-Cuba': 105, 'americas-ElSalvado': 109, 'americas-USA-CentTime-MichiganWisconsinborder': 154, 'atlanticOcean-Spain-Mainland': 269, 'africa-Ghana': 21, 'africa-Congo-EastDemRepCongo': 11, 'africa-Congo-WestDemRepCongo': 10, 'americas-Canada-MountTime-CentralNorthwestTerritories': 94, 'africa-Benin': 3, 'americas-USA-PacificTime': 160, 'americas-Brazil-Roraima': 76, 'europe-Hungary': 302, 'pacificOceanUSA-Hawaii': 415, 'americas-Argentina-MostLocations': 58, 'pacificOcean-Tonga': 392, 'americas-StLucia': 139, 'antarctica-VostokStationSMagneticPole': 177, 'americas-TurksAndCaicosIs': 144, 'indianOcean-BritishIndianOceanTerritory': 349, 'europe-Russia-Moscow07AmurRiver': 329, 'americas-Mexico-PacificTime': 130, 'europe-Lithuania': 307, 'indianOcean-Maldives': 355, 'asia-Malaysia-SabahSarawak': 222, 'americas-Guadeloupe': 116, 'americas-Canada-MountTime-AlbertaEastBritishColumbia': 93, 'americas-Ecuador': 108, 'americas-Canada-CenTime-WestNunavut': 90, 'pacificOcean-Pala': 385, 'europe-Finland': 297, 'africa-Eritrea': 17, 'americas-Argentina-EArgentina': 57, 'pacificOcean-Micronesia-TrukOrChuuk': 375, 'americas-USA-MountTime': 156, 'europe-Russia-Moscow07SakhalinIsland': 330, 'pacificOceanUSA-EastTime': 394, 'europe-Yugoslavia': 348, 'atlanticOcean-Portugal-Mainland': 265, 'americas-Argentina-Catamarca': 60, 'americas-Greenland-ScoresbysundIttoqqortoormiit': 113, 'americas-Chile-EasterIsland': 102, 'europe-Russia-Moscow05LakeBaikal': 327, 'pacificOcean-SamoaAmerican': 388, 'pacificOceanUSA-CentTime-NorthDakotaOliverCounty': 404, 'asia-Bangladesh': 186, 'asia-Russia-Moscow00WestRussia': 234, 'europe-Italy': 304, 'asia-Laos': 218, 'pacificOcean-NorthernMarianaIslands': 384, 'asia-HongKong': 198, 'pacificOcean-Micronesia-Kosrae': 377, 'europe-Sweden': 340, 'pacificOcean-Naur': 378, 'europe-Germany': 299, 'asia-Singapore': 248, 'americas-USA-AlaskaTime-WestAlaska': 164, 'asia-EastTimor': 196, 'europe-Norway': 314, 'americas-Paraguay': 135, 'pacificOcean-NewZealand-ChathamIslands': 381, 'asia-Russia-Moscow08Magadan': 244, 'americas-Mexico-MountTime-SBajaNayaritSinaloa': 127, 'africa-Gambia': 20, 'europe-Russia-Moscow08Magadan': 331, 'australia-Queensland-HolidayIslands': 280, 'africa-Cameroon': 7, 'europe-Ukraine-CentralCrimea': 346, 'europe-Bulgaria': 292, 'europe-Russia-Moscow10BeringSea': 333, 'americas-USA-EastStdTime-IndianaStarkeCounty': 151, 'asia-Turkmenistan': 254, 'americas-Brazil-AtlanticIslands': 67, 'africa-Rwanda': 37.
             agNewDaylightSavings 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.52 integer read-write
The daylight savings location. Enumeration: 'africa-Mali-SouthWestMali': 29, 'asia-Bhutan': 187, 'asia-Russia-Moscow04YeniseiRiver': 239, 'pacificOcean-USMinorOutlyingIslands-WakeIsland': 418, 'americas-Suriname': 142, 'americas-NetherlandsAntilles': 132, 'asia-Russia-Moscow-01Kaliningrad': 233, 'africa-Niger': 35, 'africa-Tunisia': 50, 'americas-Martinique': 122, 'americas-Antigua-Barbuda': 56, 'antarctica-DavisStationVestfoldHills': 175, 'americas-Mexico-CentTime-CampecheYucatan': 125, 'pacificOceanUSA-CentTime': 402, 'europe-Spain-CeutaAndMelilla': 338, 'pacificOcean-FrenchPolynesia-SocietyIslands': 365, 'americas-Per': 136, 'europe-Russia-Moscow01CaspianSea': 322, 'africa-Guinea-Bissa': 23, 'europe-Portugal-MadeiraIslands': 317, 'europe-Croatia': 293, 'asia-Jordan': 208, 'asia-Georgia': 197, 'asia-Tajikistan': 252, 'americas-Anguilla': 55, 'pacificOceanUSA-AlaskaTime-AlaskaPanhandleNeck': 412, 'australia-WesternAustralia': 283, 'europe-Romania': 319, 'indianOcean-Reunion': 358, 'australia-Victoria': 276, 'americas-Panama': 134, 'asia-Philippines': 231, 'asia-Kazakhstan-WestKazakhstan': 213, 'americas-Brazil-Acre': 79, 'pacificOcean-Kiribati-PhoenixIslands': 370, 'americas-Venezuela': 168, 'arcticOcean-JanMayen': 181, 'africa-Zimbabwe': 54, 'asia-Iraq': 205, 'asia-Iran': 204, 'asia-Uzbekistan-EastUzbekistan': 257, 'asia-Mongolia-MostLocations': 223, 'africa-Somalia': 41, 'asia-Russia-Moscow02Urals': 236, 'atlanticOcean-Bermuda': 260, 'asia-Mongolia-DornodSukhbaatar': 225, 'africa-Namibia': 34, 'americas-Brazil-SSEBrazil': 73, 'asia-Indonesia-EastSouthBorneoBaliWestTimor': 202, 'indianOcean-Mauritius': 356, 'pacificOcean-Guam': 368, 'indianOcean-ChristmasIsland': 350, 'europe-Greece': 301, 'americas-USA-EastTime-KentuckyLouisvilleArea': 147, 'asia-China-CentralChinaGansuGuizhouSichuanYunnan': 192, 'americas-Canada-AtlanTime-ELabrador': 82, 'europe-Luxembourg': 308, 'europe-VaticanCity': 347, 'pacificOceanUSA-AleutianIslands': 414, 'africa-Tanzania': 48, 'americas-Canada-CenTime-ManitobaWestOntario': 88, 'americas-USA-CentTime': 153, 'pacificOceanUSA-CentTime-MichiganWisconsinborder': 403, 'europe-Malta': 310, 'asia-Afghanistan': 182, 'europe-Russia-Moscow04YeniseiRiver': 326, 'atlanticOcean-Spain-CanaryIslands': 271, 'asia-Russia-Moscow06LenaRiver': 241, 'africa-Morocco': 32, 'pacificOcean-Micronesia-PonapeOrPohnpei': 376, 'europe-Gibraltar': 300, 'americas-StPierreAndMiquelon': 140, 'none': 0, 'australia-NorthernTerritory': 282, 'australia-NewSouthWales-Yancowinna': 278, 'europe-Russia-Moscow06LenaRiver': 328, 'asia-SaudiArabia': 247, 'africa-Spain-CanaryIslands': 45, 'europe-Ukraine-Zaporozhye-ELugansk': 345, 'americas-Chile-MostLocation': 101, 'americas-Mexico-CentTime-QuintanaRoo': 124, 'europe-Estonia': 296, 'africa-Burkina-Faso': 5, 'pacificOcean-Tokela': 391, 'pacificOcean-PapuaNewGuinea': 386, 'asia-Armenia': 183, 'americas-USA-EastStdTime-IndianaCrawfordCounty': 150, 'indianOcean-Seychelles': 359, 'pacificOcean-Niue': 382, 'europe-Moldova': 311, 'americas-Canada-CenTime-RainyRiver': 89, 'indianOcean-FrenchSouthernAndAntarcticLands': 353, 'pacificOcean-USMinorOutlyingIslands-JohnstonAtoll': 416, 'africa-SaoTome-And-Principe': 38, 'asia-Kazakhstan-AtyrauMangghysta': 212, 'asia-Korea-South': 215, 'asia-Kuwait': 216, 'pacificOcean-FrenchPolynesia-GambierIslands': 367, 'americas-Jamaica': 121, 'europe-Netherlands': 313, 'africa-Kenya': 24, 'africa-Djibouti': 14, 'americas-StKittsAndNevis': 138, 'americas-TrinidadAndTobago': 143, 'americas-Brazil-WParaRondonia': 75, 'atlanticOcean-FaeroeIslands': 262, 'atlanticOcean-StHelena': 272, 'australia-Tasmania': 275, 'americas-Canada-NewfoundlandIsland': 80, 'africa-Senegal': 39, 'americas-Brazil-AlagoasSergipe': 72, 'europe-Spain-Mainland': 337, 'pacificOcean-NorfolkIsland': 383, 'americas-Canada-EastStdTime-EastNunavut': 86, 'americas-Canada-EastTime-OntarioMostlocation': 83, 'europe-Belgium': 288, 'americas-USA-AleutianIslands': 165, 'europe-Andorra': 285, 'indianOcean-CocosOrKeelingIslands': 351, 'europe-Albania': 284, 'africa-Botswana': 4, 'europe-Portugal-Azores': 318, 'atlanticOcean-Portugal-MadeiraIslands': 266, 'americas-USA-AlaskaTime-AlaskaPanhandleNeck': 163, 'europe-Russia-Moscow03Novosibirsk': 325, 'africa-Equatorial-Guinea': 16, 'pacificOceanUSA-AlaskaTime': 410, 'asia-China-SouthwestXinjiangUyghur': 194, 'asia-Russia-Moscow07SakhalinIsland': 243, 'africa-Mozambique': 33, 'europe-France': 298, 'americas-Bolivia': 66, 'americas-Montserrat': 131, 'americas-Brazil-NEBrazil': 69, 'pacificOceanUSA-EastTime-KentuckyLouisvilleArea': 396, 'indianOcean-Madagascar': 354, 'asia-India': 199, 'pacificOcean-Kiribati-GilbertIslands': 369, 'africa-Congo-Rep': 12, 'pacificOcean-Kiribati-LineIslands': 371, 'africa-Lesotho': 25, 'americas-USA-CentTime-NorthDakotaOliverCounty': 155, 'asia-Israel': 206, 'europe-Switzerland': 341, 'europe-Ukraine-MostLocations': 343, 'americas-Mexico-MountStdTime-Sonora': 129, 'asia-Russia-Moscow03Novosibirsk': 238, 'africa-Libya': 27, 'africa-Spain-CeutaMelilla': 44, 'asia-Yemen': 259, 'pacificOceanUSA-EastStdTime-IndianaSwitzerlandCounty': 401, 'americas-StVincent': 141, 'pacificOcean-Vanuat': 419, 'americas-Canada-MountTime-WestNorthwestTerritories': 95, 'pacificOceanUSA-PacificTime': 409, 'americas-Canada-EastTime-ThunderBay': 84, 'australia-LordHoweIsland': 274, 'atlanticOcean-Portugal-Azores': 267, 'africa-Zambia': 53, 'asia-Indonesia-WestCentralBorneo': 201, 'pacificOcean-Micronesia-Yap': 374, 'asia-Russia-Moscow01CaspianSea': 235, 'americas-Argentina-Mendoza': 61, 'asia-Syria': 250, 'asia-Thailand': 253, 'americas-Canada-CenStdTime-SaskatchewanMidwest': 92, 'americas-Guyana': 118, 'europe-Russia-Moscow09Kamchatka': 332, 'asia-Russia-Moscow10BeringSea': 246, 'africa-Mali-NorthEastMali': 30, 'americas-USA-EastStdTime-IndianaMostLocations': 149, 'americas-USA-EastTime': 145, 'pacificOcean-Ecuador': 363, 'americas-Honduras': 120, 'americas-Greenland-EastCoastNorthScoresbysund': 112, 'asia-Uzbekistan-WestUzbekistan': 256, 'africa-Malawi': 28, 'americas-Brazil-WAmazonas': 78, 'europe-Slovenia': 336, 'africa-Spain-Mainland': 43, 'americas-Brazil-AmapaEPara': 68, 'americas-Canada-PacificTime-WestBritishColumbia': 97, 'europe-Russia-Moscow00WestRussia': 321, 'europe-CzechRepublic': 294, 'asia-Russia-Moscow07AmurRiver': 242, 'asia-Brunei': 188, 'pacificOcean-NewZealand-MostLocations': 380, 'asia-Cyprus': 195, 'asia-Kyrgyzstan': 217, 'americas-Guatemala': 117, 'americas-USA-AlaskaTime-AlaskaPanhandle': 162, 'europe-Denmark': 295, 'europe-Spain-CanaryIslands': 339, 'europe-Poland': 315, 'africa-Egypt': 15, 'pacificOcean-SolomonIslands': 390, 'pacificOceanUSA-EastStdTime-IndianaMostLocations': 398, 'americas-USA-MountStdTime-Arizona': 159, 'antarctica-McMurdoStationRossIsland': 171, 'americas-Canada-PacificTime-SouthYukon': 98, 'antarctica-SyowaStationEOngulI': 179, 'americas-Bahamas': 63, 'pacificOceanUSA-EastTime-KentuckyWayneCounty': 397, 'asia-Myanmar': 226, 'americas-Greenland-MostLocation': 111, 'americas-Mexico-MountTime-Chihuahua': 128, 'americas-VirginIslands-UK': 169, 'pacificOcean-Chile-EasterIslandSalayGomez': 361, 'americas-USA-EastStdTime-IndianaSwitzerlandCounty': 152, 'americas-USA-EastTime-MichiganMostLocation': 146, 'pacificOcean-MarshallIslands-Kwajalein': 373, 'africa-Chad': 9, 'americas-VirginIslands-US': 170, 'asia-Azerbaijan': 184, 'africa-Gabon': 19, 'antarctica-PalmerStationAnversIsland': 173, 'arcticOcean-Svalbard': 180, 'asia-Russia-Moscow09Kamchatka': 245, 'asia-Maca': 220, 'africa-SouthAfrica': 42, 'asia-Bahrain': 185, 'americas-Dominica': 106, 'australia-SouthAustralia': 281, 'americas-Aruba': 62, 'africa-Cote-dIvoire': 13, 'asia-China-Heilongjiang': 191, 'africa-Central-African-Rep': 8, 'pacificOcean-Chile-MostLocations': 360, 'antarctica-Amundsen-ScottStationSouthPole': 172, 'americas-Uruguay': 167, 'europe-Russia-Moscow02Urals': 323, 'europe-Ireland': 303, 'pacificOcean-FrenchPolynesia-MarquesasIslands': 366, 'pacificOcean-Pitcairn': 387, 'europe-Britain-UKGreatBritain': 290, 'americas-Mexico-CentTime-Mostlocations': 123, 'americas-Brazil-Tocantins': 71, 'asia-China-EastChinaBeijingGuangdongShanghai': 190, 'antarctica-MawsonStationHolmeBay': 174, 'atlanticOcean-Svalbard-JanMayen': 273, 'asia-Nepal': 227, 'africa-Angola': 2, 'asia-Palestine': 230, 'indianOcean-Mayotte': 357, 'africa-Burundi': 6, 'pacificOceanUSA-MountTime-SouthIdahoAndEastOregon': 406, 'asia-UnitedArabEmirates': 255, 'asia-Oman': 228, 'pacificOceanUSA-AlaskaTime-AlaskaPanhandle': 411, 'asia-China-TibetmostofXinjiangUyghur': 193, 'europe-SanMarino': 334, 'europe-Belarus': 287, 'europe-Slovakia': 335, 'americas-Brazil-EAmazonas': 77, 'europe-Ukraine-Ruthenia': 344, 'americas-Colombia': 103, 'asia-Kazakhstan-QyzylordaKyzylorda': 210, 'asia-Russia-Moscow03WestSiberia': 237, 'africa-Sudan': 46, 'europe-Turkey': 342, 'pacificOcean-NewCaledonia': 379, 'africa-Togo': 49, 'europe-Latvia': 305, 'europe-Liechtenstein': 306, 'europe-Austria': 286, 'africa-Ethiopia': 18, 'americas-DominicanRepublic': 107, 'asia-Russia-Moscow05LakeBaikal': 240, 'asia-Indonesia-IrianJayaAndMoluccas': 203, 'americas-Grenada': 115, 'americas-USA-EastTime-KentuckyWayneCounty': 148, 'atlanticOcean-CapeVerde': 261, 'americas-FrenchGuiana': 110, 'africa-Algeria': 1, 'americas-USA-MountTime-SouthIdahoAndEastOregon': 157, 'pacificOcean-Fiji': 364, 'asia-Taiwan': 251, 'europe-Monaco': 312, 'pacificOceanUSA-AlaskaTime-WestAlaska': 413, 'europe-BosniaHerzegovina': 289, 'europe-Macedonia': 309, 'americas-Nicaragua': 133, 'americas-Argentina-Jujuy': 59, 'americas-USA-Hawaii': 166, 'africa-Liberia': 26, 'atlanticOcean-FalklandIslands': 263, 'americas-Canada-CenStdTime-SaskatchewanMostlocation': 91, 'pacificOceanUSA-MountTime': 405, 'africa-Uganda': 51, 'asia-Japan': 207, 'africa-Swaziland': 47, 'americas-Brazil-Pernambuco': 70, 'antarctica-CaseyStationBaileyPeninsula': 176, 'asia-Vietnam': 258, 'africa-SierraLeone': 40, 'americas-Canada-EastStdTime-CenNunavut': 87, 'australia-NewSouthWales-MostLocations': 277, 'pacificOceanUSA-EastStdTime-IndianaStarkeCounty': 400, 'americas-CaymanIslands': 100, 'asia-Pakistan': 229, 'pacificOcean-USMinorOutlyingIslands-MidwayIslands': 417, 'asia-Kazakhstan-MostLocations': 209, 'africa-Mauritania': 31, 'europe-Britain-UKNorthernIreland': 291, 'africa-Nigeria': 36, 'pacificOceanUSA-MountTime-Navajo': 407, 'americas-CostaRica': 104, 'asia-Lebanon': 219, 'americas-Canada-AtlanTime-NovaScotia': 81, 'australia-Queensland-MostLocations': 279, 'europe-Russia-Moscow-01Kaliningrad': 320, 'americas-Canada-MountStdTime-EastBritishColumbia': 96, 'africa-Western-Sahara': 52, 'pacificOceanWallisAndFutuna': 420, 'pacificOcean-Tuval': 393, 'americas-USA-AlaskaTime': 161, 'atlanticOcean-Iceland': 264, 'americas-Mexico-CentTime-CoahDurangoNLTamaulipas': 126, 'asia-Korea-North': 214, 'americas-Brazil-MatoGrossoDoSul': 74, 'africa-Guinea': 22, 'asia-Kazakhstan-Aqtobe': 211, 'pacificOcean-SamoaWestern': 389, 'europe-Russia-Moscow03WestSiberia': 324, 'pacificOceanUSA-EastTime-MichiganMostLocations': 395, 'pacificOcean-CookIslands': 362, 'atlanticOcean-Spain-CeutaMelilla': 270, 'atlanticOcean-SouthGeorgia-SouthSandwichIslands': 268, 'americas-PuertoRico': 137, 'asia-Malaysia-PeninsularMalaysia': 221, 'pacificOcean-MarshallIslands-MostLocations': 372, 'asia-Indonesia-JavaAndSumatra': 200, 'pacificOceanUSA-MountStdTime-Arizona': 408, 'americas-Greenland-ThulePituffik': 114, 'asia-Mongolia-BayanOlgiyGoviAltaiHovdUvsZavkhan': 224, 'americas-Belize': 65, 'americas-Canada-PacificTime-NorthYukon': 99, 'americas-USA-MountTime-Navajo': 158, 'americas-Canada-EastStdTime-PangnirtungNunavut': 85, 'antarctica-Dumont-dUrvilleBaseTerreAdelie': 178, 'pacificOceanUSA-EastStdTime-IndianaCrawfordCounty': 399, 'asia-Cambodia': 189, 'americas-Haiti': 119, 'asia-SriLanka': 249, 'europe-Portugal-Mainland': 316, 'indianOcean-Comoros': 352, 'asia-Qatar': 232, 'americas-Barbados': 64, 'americas-Cuba': 105, 'americas-ElSalvado': 109, 'americas-USA-CentTime-MichiganWisconsinborder': 154, 'atlanticOcean-Spain-Mainland': 269, 'africa-Ghana': 21, 'africa-Congo-EastDemRepCongo': 11, 'africa-Congo-WestDemRepCongo': 10, 'americas-Canada-MountTime-CentralNorthwestTerritories': 94, 'africa-Benin': 3, 'americas-USA-PacificTime': 160, 'americas-Brazil-Roraima': 76, 'europe-Hungary': 302, 'pacificOceanUSA-Hawaii': 415, 'americas-Argentina-MostLocations': 58, 'pacificOcean-Tonga': 392, 'americas-StLucia': 139, 'antarctica-VostokStationSMagneticPole': 177, 'americas-TurksAndCaicosIs': 144, 'indianOcean-BritishIndianOceanTerritory': 349, 'europe-Russia-Moscow07AmurRiver': 329, 'americas-Mexico-PacificTime': 130, 'europe-Lithuania': 307, 'indianOcean-Maldives': 355, 'asia-Malaysia-SabahSarawak': 222, 'americas-Guadeloupe': 116, 'americas-Canada-MountTime-AlbertaEastBritishColumbia': 93, 'americas-Ecuador': 108, 'americas-Canada-CenTime-WestNunavut': 90, 'pacificOcean-Pala': 385, 'europe-Finland': 297, 'africa-Eritrea': 17, 'americas-Argentina-EArgentina': 57, 'pacificOcean-Micronesia-TrukOrChuuk': 375, 'americas-USA-MountTime': 156, 'europe-Russia-Moscow07SakhalinIsland': 330, 'pacificOceanUSA-EastTime': 394, 'europe-Yugoslavia': 348, 'atlanticOcean-Portugal-Mainland': 265, 'americas-Argentina-Catamarca': 60, 'americas-Greenland-ScoresbysundIttoqqortoormiit': 113, 'americas-Chile-EasterIsland': 102, 'europe-Russia-Moscow05LakeBaikal': 327, 'pacificOcean-SamoaAmerican': 388, 'pacificOceanUSA-CentTime-NorthDakotaOliverCounty': 404, 'asia-Bangladesh': 186, 'asia-Russia-Moscow00WestRussia': 234, 'europe-Italy': 304, 'asia-Laos': 218, 'pacificOcean-NorthernMarianaIslands': 384, 'asia-HongKong': 198, 'pacificOcean-Micronesia-Kosrae': 377, 'europe-Sweden': 340, 'pacificOcean-Naur': 378, 'europe-Germany': 299, 'asia-Singapore': 248, 'americas-USA-AlaskaTime-WestAlaska': 164, 'asia-EastTimor': 196, 'europe-Norway': 314, 'americas-Paraguay': 135, 'pacificOcean-NewZealand-ChathamIslands': 381, 'asia-Russia-Moscow08Magadan': 244, 'americas-Mexico-MountTime-SBajaNayaritSinaloa': 127, 'africa-Gambia': 20, 'europe-Russia-Moscow08Magadan': 331, 'australia-Queensland-HolidayIslands': 280, 'africa-Cameroon': 7, 'europe-Ukraine-CentralCrimea': 346, 'europe-Bulgaria': 292, 'europe-Russia-Moscow10BeringSea': 333, 'americas-USA-EastStdTime-IndianaStarkeCounty': 151, 'asia-Turkmenistan': 254, 'americas-Brazil-AtlanticIslands': 67, 'africa-Rwanda': 37.
             agCfgSysDlight 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.53 integer read-write
Enable/disable daylight savings time. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgIdleCLITimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.55 integer32 read-only
Set idle CLI sessions timeout.
             agNewCfgIdleCLITimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.56 integer32 read-write
Set idle CLI sessions timeout.
             agCurCfgUfdTrap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.57 integer read-only
The current status of the UFDFO SNMP trap. Enumeration: 'disabled': 3, 'enabled': 2.
             agNewCfgUfdTrap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.58 integer read-write
Enable or disable sending UFDFO SNMP trap. Enumeration: 'disabled': 3, 'enabled': 2.
             agCurCfgReminders 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.59 integer read-only
Current status of reminders feature. Enumeration: 'enable': 1, 'disable': 2.
             agNewCfgReminders 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.60 integer read-write
Enable or disable reminders feature. Enumeration: 'enable': 1, 'disable': 2.
             agCurBootNxtCliMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.66 integer read-only
Current boot mode. Enumeration: 'iscli': 2, 'aoscli': 1.
             agNewBootNxtCliMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.67 integer read-write
Next cli boot mode. Enumeration: 'iscli': 2, 'aoscli': 1.
             agCurCfgDhcp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.70 integer read-only
Enable or disable the use of DHCP, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
             agNewCfgDhcp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.71 integer read-write
Enable or disable the use of DHCP, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgHprompt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.73 integer read-only
Current status of hprompt. Enumeration: 'enable': 1, 'disable': 2.
             agNewCfgHprompt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.75 integer read-write
New status of hpprompt. Enumeration: 'enable': 1, 'disable': 2.
             agCurCfgLoginNotice 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.76 displaystring read-only
The user defined login notice.
             agNewCfgLoginNotice 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.77 displaystring read-write
The user defined login notice.
             agCurBootNxtCliModePrompt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.78 integer read-only
Current status of selectable CLI mode prompt. Enumeration: 'enable': 2, 'disable': 1.
             agNewBootNxtCliModePrompt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.79 integer read-write
Next status of selectable CLI mode prompt. Enumeration: 'enable': 2, 'disable': 1.
             agCurCfgOldDst 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.82 integer read-only
Enable or disable system DST for US. Enumeration: 'disabled': 2, 'enabled': 1.
             agNewCfgOldDst 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.83 integer read-write
Enable or disable system DST for US. Enumeration: 'disabled': 2, 'enabled': 1.
             agHavePanicDump 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.1.84 integer read-only
This object, when read, gives the user the information whether a panic dump exist in flash. Enumeration: 'noHavePanic': 2, 'havePanic': 1.
         agPortConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2
             agPortTableMaxEnt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.1 integer32 read-only
The maximum number of rows in the port configuration host table.
             agPortCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2 no-access
The table of port configuration in the current_configuration block.
                 agPortCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1 no-access
A row in the port table in the current_configuration block.
                     agPortCurCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.1 integer32 read-only
The index of the row in port configurations table.
                     agPortCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.2 integer read-only
This is the state of the port. Enumeration: 'disabled': 3, 'enabled': 2.
                     agPortCurCfgVlanTag 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.3 integer read-only
This is VLAN tag state of the port Enumeration: 'untagged': 3, 'tagged': 2.
                     agPortCurCfgRmon 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.5 integer read-only
This object is used to turn RMON on or off on the port. Enumeration: 'on': 2, 'off': 3.
                     agPortCurCfgPVID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.6 integer read-only
The default VLAN ID for the port.
                     agPortCurCfgGigEthAutoNeg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.11 integer read-only
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. Enumeration: 'on': 2, 'off': 3.
                     agPortCurCfgGigEthSpeed 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.12 integer read-only
Selects the port speed for gigabit Ethernet connection. Enumeration: 'mbs1000': 5, 'mbs10': 2, 'mbs100': 3, 'any': 4, 'mbs10000': 6.
                     agPortCurCfgGigEthMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.13 integer read-only
This object is used to select port mode for gigabit Ethernet connection. Enumeration: 'half-duplex': 3, 'full-duplex': 2, 'full-or-half-duplex': 4.
                     agPortCurCfgGigEthFctl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.14 integer read-only
This object is used to select port flow control for gigabit Ethernet connection. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'both': 4.
                     agPortCurCfgPortName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.15 displaystring read-only
The switch port name.
                     agPortCurCfgLinkTrap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.18 integer read-only
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortCurCfgTagPVID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.19 integer read-only
This is PVID tag state of the port Enumeration: 'untagged': 3, 'tagged': 2.
                     agPortCurCfgMulticastThreshold 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.20 integer read-only
Current status of the port's Multicast Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortCurCfgMulticastThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.21 integer read-only
Current port's Multicast Threshold Rate.
                     agPortCurCfgBroadcastThreshold 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.22 integer read-only
Current status of the port's Broadcast Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortCurCfgBroadcastThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.23 integer read-only
Current port's Broadcast Threshold Rate.
                     agPortCurCfgDLFThreshold 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.24 integer read-only
Current status of the port's Destination Lookup Fail Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortCurCfgDLFThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.25 integer read-only
Current port's Destination Lookup Fail Threshold Rate.
                     agPortCurCfgType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.28 displaystring read-only
The switch port type.
             agPortNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3 no-access
The table of port configuration in the new_configuration block.
                 agPortNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1 no-access
A row in the port configuration table in the new_configuration block.
                     agPortNewCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.1 integer32 read-only
The index of the row in port configurations table.
                     agPortNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.2 integer read-write
This is the state of the port. Enumeration: 'disabled': 3, 'enabled': 2.
                     agPortNewCfgVlanTag 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.3 integer read-write
This is VLAN tag state of the port Enumeration: 'untagged': 3, 'tagged': 2.
                     agPortNewCfgRmon 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.5 integer read-write
This object is used to turn RMON on or off on the port. Enumeration: 'on': 2, 'off': 3.
                     agPortNewCfgPVID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.6 integer read-write
The default VLAN ID for the port.
                     agPortNewCfgGigEthAutoNeg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.11 integer read-write
This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. Enumeration: 'on': 2, 'off': 3.
                     agPortNewCfgGigEthSpeed 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.12 integer read-write
Selects the port speed for gigabit Ethernet connection. Enumeration: 'mbs1000': 5, 'mbs10': 2, 'mbs100': 3, 'any': 4, 'mbs10000': 6.
                     agPortNewCfgGigEthMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.13 integer read-write
This object is used to select port mode for gigabit Ethernet connection. Enumeration: 'half-duplex': 3, 'full-duplex': 2, 'full-or-half-duplex': 4.
                     agPortNewCfgGigEthFctl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.14 integer read-write
This object is used to select port flow control for gigabit Ethernet connection. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'both': 4.
                     agPortNewCfgPortName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.15 displaystring read-write
The switch port name.
                     agPortNewCfgLinkTrap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.18 integer read-write
Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortNewCfgTagPVID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.19 integer read-write
This is PVID tag state of the port Enumeration: 'untagged': 3, 'tagged': 2.
                     agPortNewCfgMulticastThreshold 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.20 integer read-write
New status of the port's Multicast Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortNewCfgMulticastThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.21 integer read-write
New port's Multicast Threshold Rate.
                     agPortNewCfgBroadcastThreshold 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.22 integer read-write
New status of the port's Broadcast Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortNewCfgBroadcastThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.23 integer read-write
New port's Broadcast Threshold Rate.
                     agPortNewCfgDLFThreshold 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.24 integer read-write
New status of the port's Destination Lookup Fail Threshold. Enumeration: 'disabled': 2, 'enabled': 1.
                     agPortNewCfgDLFThresholdRate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.25 integer read-write
New port's Destination Lookup Fail Threshold Rate.
                     agPortNewCfgType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.28 displaystring read-only
The switch port type.
         agRadiusConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3
             radCurCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.1 ipaddress read-only
The IP address of the Primary RADIUS server.
             radNewCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.2 ipaddress read-write
The IP address of the Primary RADIUS server.
             radCurCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.3 ipaddress read-only
The IP address of the Secondary RADIUS server.
             radNewCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.4 ipaddress read-write
The IP address of the Secondary RADIUS server.
             radCurCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.5 integer read-only
Specify the RADIUS port number.
             radNewCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.6 integer read-write
Speicfy the RADIUS port number.
             radCurCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.7 integer read-only
The maximum number of seconds before resending authentication to RADIUS server.
             radNewCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.8 integer read-write
The maximum number of seconds before resending authentication to RADIUS server.
             radCurCfgRetries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.9 integer read-only
Number of retries to the RADIUS server.
             radNewCfgRetries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.10 integer read-write
Number of retries to the RADIUS server.
             radCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.11 integer read-only
Enable or disable RADIUS authentication. Enumeration: 'disabled': 3, 'enabled': 2.
             radNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.12 integer read-write
Enable or disable RADIUS authentication. Enumeration: 'disabled': 3, 'enabled': 2.
             radCurCfgAuthenString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.13 displaystring read-only
The RADIUS authentication string.
             radNewCfgAuthenString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.14 displaystring read-write
The RADIUS authentication string.
             radCurCfgBackdoor 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.15 integer read-only
Enable or disable RADIUS backdoor for telnet/ssh/http/https. Enumeration: 'disabled': 2, 'enabled': 1.
             radNewCfgBackdoor 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.16 integer read-write
Enable or disable RADIUS backdoor for telnet/ssh/http/https. Enumeration: 'disabled': 2, 'enabled': 1.
             radCurCfgAuthenSecondString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.17 displaystring read-only
The second RADIUS authentication string.
             radNewCfgAuthenSecondString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.18 displaystring read-write
The second RADIUS authentication string.
             radCurCfgSecBd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.19 integer read-only
Enable or disable RADIUS secure backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
             radNewCfgSecBd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.3.20 integer read-write
Enable or disable RADIUS secure backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
         agNTP 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4
             agCurCfgNTPServer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.1 ipaddress read-only
The NTP Server Address.
             agNewCfgNTPServer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.2 ipaddress read-write
The NTP Server Address.
             agCurCfgNTPResyncInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.3 integer read-only
The NTP Server resync interval in minutes.
             agNewCfgNTPResyncInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.4 integer read-write
The NTP Server resync interval in minutes.
             agCurCfgNTPService 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.9 integer read-only
Enable/disable NTP Service. Enumeration: 'disabled': 2, 'enabled': 1.
             agNewCfgNTPService 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.10 integer read-write
Enable/disable NTP Service. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgNTPSecServer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.11 ipaddress read-only
The Secondary NTP Server Address.
             agNewCfgNTPSecServer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.12 ipaddress read-write
The Secondary NTP Server Address.
             agCurCfgNTPServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.13 integer read-only
Choose the port that the primary server is connected to. Enumeration: 'data': 1, 'mgt': 2.
             agNewCfgNTPServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.14 integer read-write
Choose the port that the primary server is connected to. Enumeration: 'data': 1, 'mgt': 2.
             agCurCfgNTPSecServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.15 integer read-only
Choose the port that the secondary server is connected to. Enumeration: 'data': 1, 'mgt': 2.
             agNewCfgNTPSecServerPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.4.16 integer read-write
Choose the port that the secondary server is connected to. Enumeration: 'data': 1, 'mgt': 2.
         agSyslog 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5
             agCurCfgSyslogHost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.1 ipaddress read-only
The syslog host IP address, as currently configured in the current_configuration block.
             agNewCfgSyslogHost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.2 ipaddress read-write
The syslog host IP address, in the new_configuration block.
             agCurCfgSyslog2Host 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.3 ipaddress read-only
The second syslog host IP address, as currently configured in the current_configuration block.
             agNewCfgSyslog2Host 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.4 ipaddress read-write
The second syslog host IP address, in the new_configuration block.
             agCurCfgSyslogFac 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.5 integer read-only
The facility of syslog host in the current_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
             agNewCfgSyslogFac 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.6 integer read-write
The facility of syslog host in the new_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
             agCurCfgSyslog2Fac 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.7 integer read-only
The facility of syslog2 host in the current_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
             agNewCfgSyslog2Fac 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.8 integer read-write
The facility of syslogs host in the new_configuration block. Enumeration: 'local5': 6, 'local4': 5, 'local7': 8, 'local6': 7, 'local1': 2, 'local0': 1, 'local3': 4, 'local2': 3.
             agClrSyslogMsgs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.9 integer read-write
Clears all current Syslog messages. Enumeration: 'reset': 2, 'other': 1.
             agSyslogMsgTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.10 integer32 read-only
The maximum number of rows in the syslog message table.
             agSyslogMsgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.11 no-access
The table of syslog messages.
                   agSyslogMsgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.11.1 no-access
A syslog message stored on the switch.
                       agSyslogMsgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.11.1.1 integer32 read-only
The syslog message table index.
                       agSyslogMessage 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.11.1.2 displaystring read-only
The syslog message.
             agLog 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12
                   agNewCfgSyslogTrapConsole 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.1 integer read-write
Enable or disable console syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapConsole 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.2 integer read-only
Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapSystem 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.3 integer read-write
Enable or disable system level syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapSystem 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.4 integer read-only
Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapMgmt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.5 integer read-write
Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapMgmt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.6 integer read-only
Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapCli 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.7 integer read-write
Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapCli 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.8 integer read-only
Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapStg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.9 integer read-write
Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapStg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.10 integer read-only
Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.11 integer read-write
Enable or disable VLAN syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.12 integer read-only
Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapSsh 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.19 integer read-write
Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapSsh 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.20 integer read-only
Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapVrrp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.21 integer read-write
Enable or disable VRRP syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapVrrp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.22 integer read-only
Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapNtp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.25 integer read-write
Enable or disable NTP syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapNtp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.26 integer read-only
Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.31 integer read-write
Enable or disable IP related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.32 integer read-only
Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapWeb 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.35 integer read-write
Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapWeb 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.36 integer read-only
Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapOspf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.41 integer read-write
Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapOspf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.42 integer read-only
Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapRmon 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.45 integer read-write
Enable or disable rmon related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapRmon 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.46 integer read-only
Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapUfd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.47 integer read-write
Enable or disable UFD related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapUfd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.48 integer read-only
Enable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.49 integer read-write
Enable or disable CFG related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.50 integer read-only
Enable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrap8021x 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.51 integer read-write
Enable or disable 802.1 related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrap8021x 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.52 integer read-only
Enable or disable 802.1 related syslog and SNMP trap, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agNewCfgSyslogTrapAll 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.55 integer read-write
Enable or disable all syslog and SNMP traps, in the new_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
                   agCurCfgSyslogTrapAll 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.12.56 integer read-only
Enable or disable all syslog and SNMP traps, as currently configured in the current_configuration block. Enumeration: 'disabled': 2, 'enabled': 1.
             agCurCfgSyslogSev 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.13 integer read-only
The severity of syslog host in the current configuration block. Enumeration: 'warning4': 5, 'crit2': 3, 'debug7': 8, 'alert1': 2, 'emerg0': 1, 'err3': 4, 'notice5': 6, 'info6': 7.
             agNewCfgSyslogSev 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.14 integer read-write
The severity of syslog host in the new configuration block. Enumeration: 'warning4': 5, 'crit2': 3, 'debug7': 8, 'alert1': 2, 'emerg0': 1, 'err3': 4, 'notice5': 6, 'info6': 7.
             agCurCfgSyslog2Sev 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.15 integer read-only
The severity of syslog2 host in the current configuration block. Enumeration: 'warning4': 5, 'crit2': 3, 'debug7': 8, 'alert1': 2, 'emerg0': 1, 'err3': 4, 'notice5': 6, 'info6': 7.
             agNewCfgSyslog2Sev 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.16 integer read-write
The severity of syslogs host in the new configuration block. Enumeration: 'warning4': 5, 'crit2': 3, 'debug7': 8, 'alert1': 2, 'emerg0': 1, 'err3': 4, 'notice5': 6, 'info6': 7.
             agCurCfgSyslogHostPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.17 integer read-only
Choose the port that the primary Syslog server is connected to. Enumeration: 'data': 1, 'mgt': 2.
             agNewCfgSyslogHostPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.18 integer read-write
Choose the port that the primary Syslog server is connected to. Enumeration: 'data': 1, 'mgt': 2.
             agCurCfgSyslog2HostPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.19 integer read-only
Choose the port that the secondary Syslog server is connected to. Enumeration: 'data': 1, 'mgt': 2.
             agNewCfgSyslog2HostPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.20 integer read-write
Choose the port that the secondary Syslog server is connected to. Enumeration: 'data': 1, 'mgt': 2.
         agTransfer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7
             agTransferServer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.1 displaystring read-write
The FTP/TFTP server IP address or domain name.
             agTransferImage 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.2 integer read-write
Whether the image file should be loaded in image1 or image2 or boot in flash. Enumeration: 'image2': 3, 'image1': 2, 'boot': 4.
             agTransferImageFileName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.3 displaystring read-write
The image file name to be downloaded.
             agTransferCfgFileName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.4 displaystring read-write
The configuration file name.
             agTransferDumpFileName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.5 displaystring read-write
The core dump file name.
             agTransferAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.6 integer read-write
This is an action object to perform various FTP/TFTP Get or Put functions. The FTP/TFTP sever is specified in agTransferServer object. img-get(2) - Download switch image from a specified image file(agTransferImageFileName) on the FTP/TFTP server to the destinated storage(agTransferImage). cfg-get(3) - Download switch configuration from a specified file(agTransferCfgFileName) on the FTP/TFTP server. cfg-put(4) - Upload switch configuration to a specified file(agTransferCfgFileName) on the FTP/TFTP server. dump-put(5)- Download switch core dump to a specified file(agTransferDumpFileName) on the FTP/TFTP server. img-put(7) - Upload specified switch image to a specified image file(agTransferImageFileName) on the FTP/TFTP server. tsdump-put(5)- Download switch core dump to a specified file (agTransferTSDumpFileName) on the FTP/TFTP server. other(1) is returned always when read. Enumeration: 'img-get': 2, 'dump-put': 5, 'other': 1, 'cfg-get': 3, 'img-put': 7, 'cfg-put': 4, 'tsdump-put': 8.
             agTransferLastActionStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.7 displaystring read-only
The recorded status of the previous FTP/TFTP activity.
             agTransferPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.8 integer read-write
Specify whether the FTP/TFTP operation should be performed over the data port or the management port. Enumeration: 'data': 1, 'mgt': 2.
             agTransferUserName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.9 displaystring read-write
The username for FTP server or blank for TFTP server.
             agTransferPassword 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.10 displaystring read-write
The password for FTP server.
             agTransferTSDumpFileName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.11 displaystring read-write
The TS dump file name.
             agTransferLastConfigurationActionStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.7.14 integer read-only
The status of the last configuration action using the file ftp/tftp'd from the server. Enumeration: 'failed': 2, 'successfully': 1.
         agApply 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8
             agApplyPending 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.1 integer read-only
This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above. Enumeration: 'applyNeeded': 2, 'noApplyNeeded': 3.
             agApplyConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.2 integer read-write
When this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable. Enumeration: 'apply': 1, 'idle': 2, 'inprogress': 3, 'failed': 5, 'complete': 4.
             agApplyTableSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.4 integer32 read-only
The number of strings in the apply table.
             agApplyTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.5 no-access
The table of URL path for URL load balancing in the current_config.
                 agApplyTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.5.1 no-access
Information about an URL path for URL load balancing.
                     agApplyIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.5.1.1 integer32 read-only
The table index.
                     agApplyString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.5.1.2 octet string read-only
A string in the apply table.
         agTacacsConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10
               tacCurCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.1 ipaddress read-only
The IP address of the Primary TACACS+ server.
               tacNewCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.2 ipaddress read-write
The IP address of the Primary TACACS+ server.
               tacCurCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.3 ipaddress read-only
The IP address of the Secondary TACSACS server.
               tacNewCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.4 ipaddress read-write
The IP address of the Secondary TACACS+ server.
               tacCurCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.5 integer read-only
Specify the TACACS+ port number.
               tacNewCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.6 integer read-write
Specify the TACACS+ port number.
               tacCurCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.7 integer read-only
The maximum number of seconds before resending authentication to TACACS+ server.
               tacNewCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.8 integer read-write
The maximum number of seconds before resending authentication to TACACS+ server.
               tacCurCfgRetries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.9 integer read-only
Number of retries to the TACACS+ server.
               tacNewCfgRetries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.10 integer read-write
Number of retries to the TACACS+ server.
               tacCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.11 integer read-only
Enable or disable TACACS+ authentication. Enumeration: 'disabled': 3, 'enabled': 2.
               tacNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.12 integer read-write
Enable or disable TACACS+ authentication. Enumeration: 'disabled': 3, 'enabled': 2.
               tacCurCfgAuthenString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.13 displaystring read-only
The TACACS+ authentication string.
               tacNewCfgAuthenString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.14 displaystring read-write
The TACACS+ authentication string.
               tacCurCfgBackdoor 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.15 integer read-only
Enable or disable TACACS+ backdoor for telnet/ssh/http/https. Enumeration: 'disabled': 2, 'enabled': 1.
               tacNewCfgBackdoor 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.16 integer read-write
Enable or disable TACACS+ backdoor for telnet/ssh/http/https. Enumeration: 'disabled': 2, 'enabled': 1.
               tacCurCfgAuthenSecondString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.17 displaystring read-only
The second TACACS+ authentication string.
               tacNewCfgAuthenSecondString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.18 displaystring read-write
The second TACACS+ authentication string.
               tacCurCfgSecBd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.23 integer read-only
Enable or disable TACACS+ secure backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
               tacNewCfgSecBd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.24 integer read-write
Enable or disable TACACS+ secure backdoor for telnet. Enumeration: 'disabled': 2, 'enabled': 1.
               tacCurCfgCmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.25 integer read-only
Enable/Disable Tacacs+ new prividlege level maping. Enumeration: 'disabled': 2, 'enabled': 1.
               tacNewCfgCmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.26 integer read-write
Enable/Disable Tacacs+ new prividlege level maping. Enumeration: 'disabled': 2, 'enabled': 1.
               agTacacsUserMapCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.31 no-access
The table of tacacs+ user map current configuration.
                     agTacacsUserMapCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.31.1 no-access
A row in the tacacs+ user mapping table.
                         agTacacsUserMapCurCfgUId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.31.1.1 integer32 read-only
The current config remote privilege identifier.
                         agTacacsUserMapCurCfgMapping 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.31.1.2 integer read-only
Current Tacacs+ user privilege mappings. Enumeration: 'oper': 2, 'admin': 3, 'none': 0, 'user': 1.
               agTacacsUserMapNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.32 no-access
The table of tacacs+ user map new configuration.
                     agTacacsUserMapNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.32.1 no-access
A row in the tacacs+ user mapping table.
                         agTacacsUserMapNewCfgUId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.32.1.1 integer32 read-only
The new config remote privilege identifier.
                         agTacacsUserMapNewCfgMapping 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.32.1.2 integer read-only
Set new Tacacs+ user privilege mappings. Enumeration: 'oper': 2, 'admin': 3, 'none': 0, 'user': 1.
         agMgmtNetConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11
               agMgmtNetTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.1 integer32 read-only
The maximum number of entries in the Management Network Table.
               agCurCfgMgmtNetTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2 no-access
The table for Management Network definitions in the current configuration block.
                   agCurCfgMgmtNetEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2.1 no-access
A row in the management network definition table.
                       agCurCfgMgmtNetIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2.1.1 integer32 read-only
The index of the Management Network Definition table.
                       agCurCfgMgmtNetSubnet 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2.1.2 ipaddress read-only
The Management Network Address in the current_configuration block.
                       agCurCfgMgmtNetMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2.1.3 ipaddress read-only
The Management Network Mask in the current_configuration block.
               agNewCfgMgmtNetTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3 no-access
The table for Management Network definitions in the new configuration block.
                   agNewCfgMgmtNetEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1 no-access
A row in the management network definition table.
                       agNewCfgMgmtNetIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1.1 integer32 read-only
The index of the Management Network Definition table.
                       agNewCfgMgmtNetSubnet 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1.2 ipaddress read-only
The Management Network Address in the new_configuration block.
                       agNewCfgMgmtNetMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1.3 ipaddress read-only
The Management Network Mask in the new_configuration block.
                       agNewCfgMgmtNetDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1.4 integer read-only
By setting the value to delete(2), the entire row is deleted. Enumeration: 'other': 1, 'delete': 2.
               agMgmtNetClear 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.4 integer read-write
By setting the value to delete(2), the entire table is cleared. Enumeration: 'clear': 2, 'other': 1.
         agAccess 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12
               agAccessUserMaxUserID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.1 integer32 read-only
The maximum number of Users ID.
               agAccessUserCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2 no-access
The table of Access user configuration.
                   agAccessUserCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1 no-access
A row in the Access user configuration table.
                       agAccessUserCurCfgUId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.1 integer32 read-only
The User identifier.
                       agAccessUserCurCos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.2 integer read-only
The user class of service. Enumeration: 'oper': 3, 'admin': 6, 'user': 0.
                       agAccessUserCurCfgName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.3 displaystring read-only
The user name.
                       agAccessUserCurCfgPswd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.4 displaystring read-only
The character string representing the user passworde.
                       agAccessUserCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.5 integer read-only
Enable or disable a user. Enumeration: 'disabled': 3, 'enabled': 2.
               agAccessUserNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3 no-access
The table of Access user configuration.
                   agAccessUserNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1 no-access
A row in the Access user configuration table.
                       agAccessUserNewCfgUId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.1 integer32 read-only
The User identifier.
                       agAccessUserNewCos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.2 integer read-only
The user class of service. Enumeration: 'oper': 3, 'admin': 6, 'user': 0.
                       agAccessUserNewCfgName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.3 displaystring read-only
The user name.
                       agAccessUserNewCfgPswd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.4 displaystring read-only
The character string representing the user passworde.
                       agAccessUserNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.5 integer read-only
Enable or disable a user. Enumeration: 'disabled': 3, 'enabled': 2.
                       agAccessUserNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.6 integer read-only
This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User Enumeration: 'other': 1, 'delete': 2.
         agSSHConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13
               sshCurCfgIntrval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.1 integer read-only
Interval for generating the RSA server key.
               sshNewCfgIntrval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.2 integer read-write
Set Interval for generating the RSA server key.
               sshCurCfgScpAdm 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.3 displaystring read-only
SCP-only admin password.
               sshNewCfgScpAdm 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.4 displaystring read-write
Set SCP-only admin password.
               sshNewCfgHKeyGen 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.5 integer read-write
This is an action object to generate the RSA host key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA host key. Enumeration: 'other': 2, 'generate': 1.
               sshNewCfgSKeyGen 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.6 integer read-write
This is an action object to generate the RSA server key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA server key. Enumeration: 'other': 2, 'generate': 1.
               sshCurCfgSSHPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.7 integer read-only
SSH server port number.
               sshNewCfgSSHPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.8 integer read-write
Set SSH server port number.
               sshCurCfgScpApplySave 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.9 integer read-only
SCP apply and save. Enumeration: 'disabled': 2, 'enabled': 1.
               sshNewCfgScpApplySave 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.10 integer read-write
Enable/Disable the SCP apply and save. Enumeration: 'disabled': 2, 'enabled': 1.
               sshCurCfgStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.11 integer read-only
SSH server status. Enumeration: 'on': 1, 'off': 2.
               sshNewCfgStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.13.12 integer read-write
Turn SSH server ON/OFF. Enumeration: 'on': 1, 'off': 2.
     agentStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2
         pktStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1
             pktStatsAllocs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.1 counter32 read-only
Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsFrees 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.2 counter32 read-only
Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.
             pktStatsAllocFails 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.3 counter32 read-only
Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsMediums 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.4 gauge32 read-only
Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsJumbos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.5 gauge32 read-only
Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsSmalls 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.6 gauge32 read-only
Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsMediumsHiWatermark 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.7 counter32 read-only
The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsJumbosHiWatermark 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.8 counter32 read-only
The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
             pktStatsSmallsHiWatermark 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.1.9 counter32 read-only
The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
         mpCpuStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.2
             mpCpuStatsUtil1Second 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.2.1 integer32 read-only
The utilization of MP CPU over 1 second. It shows the percentage.
             mpCpuStatsUtil4Seconds 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.2.2 integer32 read-only
The utilization of MP CPU over 4 seconds. It shows the percentage.
             mpCpuStatsUtil64Seconds 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.2.3 integer32 read-only
The utilization of MP CPU over 64 seconds. It shows the percentage.
         portStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3
             portStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1 no-access
The table of port statistics.
                 portStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1 no-access
A row in the port stats table.
                     portStatsIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.1 integer32 read-only
The port index.
                     portStatsPhyIfInOctets 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.2 counter32 read-only
The total number of octets received on the interface, including framing characters.
                     portStatsPhyIfInUcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.3 counter32 read-only
The number of subnetwork-unicast packets delivered to a higher-layer protocol.
                     portStatsPhyIfInNUcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.4 counter32 read-only
The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
                     portStatsPhyIfInDiscards 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.5 counter32 read-only
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
                     portStatsPhyIfInErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.6 counter32 read-only
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
                     portStatsPhyIfInUnknownProtos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.7 counter32 read-only
The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
                     portStatsPhyIfOutOctets 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.8 counter32 read-only
The total number of octets transmitted out of the interface, including framing characters.
                     portStatsPhyIfOutUcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.9 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.
                     portStatsPhyIfOutNUcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.10 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.
                     portStatsPhyIfOutDiscards 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.11 counter32 read-only
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
                     portStatsPhyIfOutErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.12 counter32 read-only
The number of outbound packets that could not be transmitted because of errors.
                     portStatsPhyIfOutQLen 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.13 gauge32 read-only
The length of the output packet queue (in packets).
                     portStatsPhyIfInBroadcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.14 counter32 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
                     portStatsPhyIfOutBroadcastPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.15 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
                     portStatsClear 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.16 integer read-write
Setting this value to clear(1) clears the stats for this port. Enumeration: 'clear': 1, 'ok': 2.
                     portStatsPhyIfInMulticastPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.17 counter32 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.
                     portStatsPhyIfOutMulticastPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.18 counter32 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.
             dot1xPortStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2 no-access
The table of 802.1x port statistics.
                 dot1xPortStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1 no-access
A row in the 802.1x port stats table.
                     dot1xPortStatsIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.1 integer32 read-only
The 802.1x port stats index.
                     eapolFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.2 integer32 read-only
                     eapolFramesTx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.3 integer32 read-only
                     eapolStartFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.4 integer32 read-only
                     eapolLogoffFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.5 integer32 read-only
                     eapolRespIdFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.6 integer32 read-only
                     eapolRespFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.7 integer32 read-only
                     eapolReqIdFramesTx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.8 integer32 read-only
                     eapolReqFramesTx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.9 integer32 read-only
                     invalidEapolFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.10 integer32 read-only
                     eapLengthErrorFramesRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.11 integer32 read-only
                     authEntersConnecting 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.12 integer32 read-only
                     authEapLogoffsWhileConnecting 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.13 integer32 read-only
                     authEntersAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.14 integer32 read-only
                     authSuccessesWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.15 integer32 read-only
                     authTimeoutsWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.16 integer32 read-only
                     authFailWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.17 integer32 read-only
                     authReauthsWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.18 integer32 read-only
                     authEapStartsWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.19 integer32 read-only
                     authEapLogoffWhileAuthenticating 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.20 integer32 read-only
                     authReauthsWhileAuthenticated 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.21 integer32 read-only
                     authEapStartsWhileAuthenticated 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.22 integer32 read-only
                     authEapLogoffWhileAuthenticated 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.23 integer32 read-only
                     backendResponses 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.24 integer32 read-only
                     backendAccessChallenges 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.25 integer32 read-only
                     backendOtherRequestsToSupplicant 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.26 integer32 read-only
                     backendNonNakResponsesFromSupplicant 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.27 integer32 read-only
                     backendAuthSuccesses 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.28 integer32 read-only
                     backendAuthFails 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.29 integer32 read-only
                     lastEapolFrameVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.30 integer32 read-only
                     lastEapolFrameSource 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.31 macaddress read-only
             allportsStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3 no-access
The table of all ports statistics.
                 allportsStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1 no-access
A row in the table of all ports statistics.
                     allportsStatsIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.1 integer32 read-only
The port number.
                     allportsStatsDescr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.2 displaystring read-only
The port description.
                     allportsStatsSpeed 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.3 integer read-only
The current operational speed of the port. Enumeration: 'mbs1000': 4, 'mbs10': 2, 'mbs100': 3, 'any': 5, 'mbs10000': 6.
                     allportsStatsPhysAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.4 physaddress read-only
The port MAC Address.
                     allportsStatsAdminStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.5 integer read-only
The port Admin state. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                     allportsStatsOperStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.6 integer read-only
The port Operational Status. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                     allportsStatsInOctets 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.7 counter32 read-only
Octets In for port.
                     allportsStatsOutOctets 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.8 counter32 read-only
Octets Out for port.
                     allportsStatsInPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.9 counter32 read-only
Packets In for port.
                     allportsStatsOutPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.10 counter32 read-only
Packets Out for port.
                     allportsStatsInUcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.11 displaystring read-only
Unicast Packets In for port.
                     allportsStatsOutUcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.12 displaystring read-only
Unicast Packets Out for port.
                     allportsStatsInBcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.13 displaystring read-only
Broadcasts Packets In for port.
                     allportsStatsOutBcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.14 displaystring read-only
Broadcasts Packets Out for port.
                     allportsStatsInMcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.15 displaystring read-only
Multicast Packets In for port.
                     allportsStatsOutMcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.16 displaystring read-only
Multicast Packets Out for port.
                     allportsStatsInDiscards 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.17 counter32 read-only
Discarded Packets for port.
                     allportsStatsOutDiscards 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.18 counter32 read-only
Outbound Packets for port.
                     allportsStatsInErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.19 counter32 read-only
Error Packets for port.
                     allportsStatsOutErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.20 counter32 read-only
Not sent packets due to error.
                     allportsStatsInUnknownProtos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.21 displaystring read-only
Unknown protocol packets.
                     allportsStatsOutQLen 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.22 displaystring read-only
Outbound Packet Queue Length.
                     allportsStatsipInReceives 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.23 counter32 read-only
Ip In Receives.
                     allportsStatsipInHeaderErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.24 counter32 read-only
Ip In Header Errors.
                     allportsStatsipInDiscards 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.25 counter32 read-only
Ip In Discards.
                     allportsStatsLinkStateChange 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.26 counter32 read-only
Number of link state changes.
             clearPortsStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.4 integer read-write
Setting this to clear(2) results in clearing the statistics for all ports. Enumeration: 'clear': 2, 'ok': 1.
         portMgmtStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5
             portMgmtStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1 no-access
The table of management port statistics.
                 portMgmtStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1 no-access
A row in the management port stats table.
                     portMgmtStatsIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.1 integer32 read-only
The management port index.
                     portMgmtStatsRxpackets 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.2 counter32 read-only
Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
                     portMgmtStatsRxErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.3 counter32 read-only
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
                     portMgmtStatsRxDropped 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.4 counter32 read-only
The number of inbound packets that were dropped.
                     portMgmtStatsRxOverruns 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.5 counter32 read-only
The number of data overruns over this link.
                     portMgmtStatsRxFrame 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.6 counter32 read-only
The number of frames received on this link.
                     portMgmtStatsTxpackets 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.7 counter32 read-only
Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
                     portMgmtStatsTxErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.8 counter32 read-only
The number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
                     portMgmtStatsTxDropped 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.9 counter32 read-only
The number of outbound packets that were dropped.
                     portMgmtStatsTxOverruns 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.10 counter32 read-only
The number of data overruns over this link.
                     portMgmtStatsTxCarrier 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.11 counter32 read-only
The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface.
                     portMgmtStatsTxCollisions 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.12 counter32 read-only
The number of collisions on this outbound segment.
                     portMgmtStatsRxBytes 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.13 counter32 read-only
The total number of bytes received.
                     portMgmtStatsRxMulticast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.14 counter32 read-only
The total number of multicast packets received.
                     portMgmtStatsTxBytes 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.15 counter32 read-only
The total number of bytes transmitted.
         agClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.7
             snmpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.7.1 integer read-write
Setting this to clear(2) results in clearing the SNMP statistics. Enumeration: 'clear': 2, 'ok': 1.
         ntpStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9
             ntpPrimaryServerReqSent 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.1 integer32 read-only
The total number of NTP requests sent to Primary NTP Server.
             ntpPrimaryServerRespRcvd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.2 integer32 read-only
The total number of NTP responces received from Primary NTP Server.
             ntpPrimaryServerUpdates 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.3 integer32 read-only
The total number of NTP Updates by Primary NTP Server.
             ntpSecondaryServerReqSent 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.4 integer32 read-only
The total number of NTP requests sent to Secondary NTP Server.
             ntpSecondaryServerRespRcvd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.5 integer32 read-only
The total number of NTP responces received from Secondary NTP Server.
             ntpSecondaryServerUpdates 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.6 integer32 read-only
The total number of NTP Updates by Secondary NTP Server.
             ntpLastUpdateServer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.7 integer read-only
The type of ntp server updated last time. Enumeration: 'none': 0, 'primary': 1, 'secondary': 2.
             ntpLastUpdateTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.8 displaystring read-only
The last time updated by ntp server.
             ntpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.9 integer read-write
Setting this value to clear(2) clears the stats for ntp. Enumeration: 'clear': 2, 'ok': 1.
             ntpSystemCurrentTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.9.10 displaystring read-only
The current system time.
         aclStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12
               aclStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1 no-access
The table of ACL statistics.
                   aclStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1.1 no-access
Statistics about a particular ACL configuration entry.
                       aclStatsIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1.1.1 integer32 read-only
The acl index.
                       aclStatsHits 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1.1.2 counter32 read-only
Total number of hits for this ACL entry
                       aclClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1.1.3 integer read-write
Setting this value to clear(2) clears the stats for the ACL. Enumeration: 'clear': 2, 'ok': 1.
     agentInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3
         hardware 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.1
             hwPartNumber 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.1.1 displaystring read-only
The hardware part number of the Bladetype2 Switch.
             hwRevision 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.1.2 displaystring read-only
The hardware revision. If the revision is not available, a zero length string should be returned.
             hwSerialNumber 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.1.5 displaystring read-only
The switch serial number.
         portInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2
             portInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1 no-access
The table of port information.
                 portInfoTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1 no-access
A row in the port information table.
                     portInfoIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.1 integer32 read-only
The port index.
                     portInfoSpeed 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.2 integer read-only
The current operational speed of the port. Enumeration: 'mbs1000': 4, 'mbs10': 2, 'mbs100': 3, 'mbs10000': 6, 'any': 5.
                     portInfoMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.3 integer read-only
The current operational mode of the port. Enumeration: 'half-duplex': 3, 'full-duplex': 2.
                     portInfoFlowCtrl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.4 integer read-only
The current operational flow control of the port. Enumeration: 'transmit': 2, 'receive': 3, 'none': 5, 'both': 4.
                     portInfoLink 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.5 integer read-only
The current operational link status of the port. Enumeration: 'down': 2, 'disabled': 3, 'inoperative': 4, 'up': 1.
                     portInfoPhyIfDescr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.6 displaystring read-only
A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.
                     portInfoPhyIfType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.7 integer read-only
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. Enumeration: 'propPointToPointSerial': 22, 'frame-relay': 32, 'softwareLoopback': 24, 'rfc877-x25': 5, 'ds3': 30, 'ppp': 23, 'ddn-x25': 4, 'slip': 28, 'proteon-10Mbit': 12, 'ethernet-3Mbit': 26, 'sip': 31, 'iso88023-csmacd': 7, 'other': 1, 'sdlc': 17, 'lapb': 16, 'iso88024-tokenBus': 8, 'hyperchannel': 14, 'basicISDN': 20, 'ethernet-csmacd': 6, 'primaryISDN': 21, 'e1': 19, 'fddi': 15, 'proteon-80Mbit': 13, 'starLan': 11, 'eon': 25, 'iso88025-tokenRing': 9, 'ds1': 18, 'hdh1822': 3, 'nsip': 27, 'regular1822': 2, 'iso88026-man': 10, 'ultra': 29.
                     portInfoPhyIfMtu 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.8 integer32 read-only
The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
                     portInfoPhyIfPhysAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.9 physaddress read-only
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
                     portInfoPhyIfOperStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.10 integer read-only
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                     portInfoPhyIfLastChange 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.11 timeticks read-only
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
         agDiff 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4
             agDiffState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.2 integer read-write
When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete. Enumeration: 'diff': 1, 'flashdiff': 2, 'inprogress': 4, 'idle': 3, 'complete': 5.
             agDiffTableSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.3 integer32 read-only
The number of strings in the diff table.
             agDiffTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.4 no-access
The table of URL path for URL load balancing in the current_config.
                 agDiffTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.4.1 no-access
Information about an URL path for URL load balancing.
                     agDiffIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.4.1.1 integer32 read-only
The table index.
                     agDiffString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.4.1.2 octet string read-only
A string in the diff table.
         agCfgDump 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5
             agCfgDumpState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.2 integer read-write
When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP. Enumeration: 'idle': 2, 'inprogress': 3, 'dump': 1, 'complete': 4.
             agCfgDumpTableSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.3 integer32 read-only
The number of strings in the dump table.
             agCfgDumpTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.4 no-access
The table of dump strings.
                 agCfgDumpTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.4.1 no-access
An entry in the dump table.
                     agCfgDumpIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.4.1.1 integer32 read-only
The table index.
                     agCfgDumpString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.4.1.2 octet string read-only
A string in the dump table.
         geaportInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7
             geaportInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1 no-access
The table of gea port mapping.
                 geaportInfoTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1.1 no-access
An entry in the geaport table mapping.
                     geaportInfoLogicalIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1.1.1 integer32 read-only
The logical port index.
                     geaportInfoPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1.1.2 integer read-only
The GEA Port (0-based).
                     geaportInfoUnit 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1.1.3 integer read-only
The GEA Unit.
         ufdInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8
             ufdInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.1 integer read-only
Uplink Failure Detection State. Enumeration: 'disabled': 2, 'enabled': 1.
             ufdInfoLtMStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.2 integer read-only
LtM Status. Enumeration: 'down': 2, 'forwarding': 3, 'up': 1, 'blocked': 4.
             ufdInfoLtMPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.3 octet string read-only
The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM.
             ufdInfoLtMTrunks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.4 octet string read-only
The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM.
             ufdInfoLtMAdminkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.5 integer read-only
The LtM admin key.
             ufdInfoLtDStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.6 integer read-only
LtD status. Enumeration: 'autoDisabled': 2, 'up': 1.
             ufdInfoLtDPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.7 octet string read-only
The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD.
             ufdInfoLtDTrunks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.8 integer read-only
The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD.
             ufdInfoLtDAdminkeyMaxEnt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.9 integer32 read-only
The maximum number of rows in the LtD admin key configuration table.
             ufdInfoLtDAdminkeyTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.10 no-access
The table of LtD admin key configuration.
                   ufdInfoLtDAdminkeyTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.10.1 no-access
A row in the LtD admin key table.
                       ufdInfoLtDAdminkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.10.1.1 integer read-only
The LtD admin key.
         sfpInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9
             sfpInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1 no-access
The table of external port SFP information.
                 sfpInfoTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1 no-access
A row in the external port SFP information table.
                     sfpInfoIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.1 integer32 read-only
The external port SFX index.
                     sfpInfoPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.2 displaystring read-only
External Port SFP/XFP alias.
                     sfpInfoDevice 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.3 displaystring read-only
External Port SFP/XFP Device.
                     sfpInfoTXEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.4 integer read-only
External Port SFP/XFP TX-Enable. Enumeration: 'disabled': 3, 'notInstalled': 1, 'enabled': 2.
                     sfpInfoRXSignal 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.5 integer read-only
External Port SFP/XFP RX-Signal. Enumeration: 'notAvailable': 4, 'notInstalled': 1, 'ok': 3, 'lost': 2.
                     sfpInfoTXFault 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.6 integer read-only
External Port SFP/XFP TX-Fault. Enumeration: 'notAvailable': 4, 'fault': 2, 'none': 3, 'notInstalled': 1.
                     sfpInfoApproved 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.7 integer read-only
External Port SFP/XFP Approval. Enumeration: 'notXFP': 2, 'yes': 4, 'notInstalled': 1, 'notSFP': 3.
     agentOper 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4
         agPortOperTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1 no-access
The table of port operations.
             agPortOperTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1.1 no-access
A row in the port operations table.
                 portOperIdx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1.1.1 integer32 read-only
The port index.
                 portOperState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1.1.2 integer read-write
Enable/Disable port. Enumeration: 'disabled': 2, 'enabled': 1.
                 portOperRmon 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1.1.3 integer read-write
Enable/Disable RMON for port. Enumeration: 'disabled': 2, 'enabled': 1.
         agNTPOper 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.2
             ntpOperSendReq 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.2.1 integer read-write
Allows the user to send requests to the NTP server. Enumeration: 'yes': 2, 'no': 1.
         portOperDot1xTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3 no-access
The table of port operations.
             portOperDot1xTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3.1 no-access
A row in the port 802.1x operation table.
                 portOperDot1xIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3.1.1 integer32 read-only
The port index.
                 portOperDot1xReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3.1.2 integer read-write
Reinitialize 802.1x access control on port. Enumeration: 'yes': 2, 'no': 1.
                 portOperDot1xReauth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3.1.3 integer read-write
Initiate reauthentication on port. Enumeration: 'yes': 2, 'no': 1.
 layer2 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2
     layer2Configs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1
         vlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1
             vlanMaxEnt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.1 integer32 read-only
The maximum number of rows in the VLAN configuration table.
             vlanCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2 no-access
The table of VLAN configuration.
                 vlanCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1 no-access
A row in the VLAN configuration table.
                     vlanCurCfgVlanId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.1 integer32 read-only
The VLAN identifier.
                     vlanCurCfgVlanName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.2 displaystring read-only
The VLAN name.
                     vlanCurCfgPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.3 octet string read-only
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
                     vlanCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.4 integer read-only
Enable or disable a VLAN Enumeration: 'disabled': 3, 'enabled': 2.
                     vlanCurCfgStg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.6 integer32 read-only
The Spanning Tree Group for the VLAN.
             vlanNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3 no-access
The table of VLAN configuration.
                 vlanNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1 no-access
A row in the VLAN configuration table.
                     vlanNewCfgVlanId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.1 integer32 read-only
The VLAN identifier.
                     vlanNewCfgVlanName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.2 displaystring read-only
The VLAN name.
                     vlanNewCfgPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.3 octet string read-only
The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
                     vlanNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.4 integer read-only
Enable or disable a VLAN Enumeration: 'disabled': 3, 'enabled': 2.
                     vlanNewCfgAddPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.5 integer32 read-only
The port to be added to the specified VLAN. A '0' value is returned when read.
                     vlanNewCfgRemovePort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.6 integer32 read-only
The port to be removed from the specified VLAN. A '0' value is returned when read.
                     vlanNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.7 integer read-only
This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN Enumeration: 'other': 1, 'delete': 2.
                     vlanNewCfgStg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.9 integer32 read-only
The Spanning Tree Group for the VLAN.
         trunkgroup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2
             trunkGroupTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.1 integer32 read-only
The maximum number of entries in trunk group table.
             trunkGroupCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2 no-access
The table of trunk group configuration.
                 trunkGroupCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2.1 no-access
A row in the trunk group configuration table.
                     trunkGroupCurCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2.1.1 integer32 read-only
The identifier of the trunk group.
                     trunkGroupCurCfgPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2.1.2 octet string read-only
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
                     trunkGroupCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2.1.3 integer read-only
Enable or disable a trunk group. Enumeration: 'enable': 1, 'disable': 2.
             trunkGroupNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3 no-access
The table of trunk group configuration.
                 trunkGroupNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1 no-access
A row in the trunk group configuration table.
                     trunkGroupNewCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.1 integer32 read-only
The identifier of the trunk group.
                     trunkGroupNewCfgPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.2 octet string read-only
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
                     trunkGroupNewCfgAddPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.3 integer32 read-only
The port to be added in the trunk group. When read, 0 is returned.
                     trunkGroupNewCfgRemovePort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.4 integer32 read-only
The port to be deleted from the trunk group. when read, 0 is returned.
                     trunkGroupNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.5 integer read-only
Enable or disable a trunk group. Enumeration: 'enable': 1, 'disable': 2.
                     trunkGroupNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.6 integer read-only
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. Enumeration: 'other': 1, 'delete': 2.
         stgCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3
             stgCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1 no-access
The table of Spanning Tree Group configuration.
                 stgCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1 no-access
Information about a particular Spanning Tree Group configuration.
                     stgCurCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.1 integer32 read-only
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
                     stgCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.2 integer read-only
Turn on of off Spanning Tree operation of a particular Spanning Tree Group. Enumeration: 'on': 1, 'off': 2.
                     stgCurCfgPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.5 integer read-only
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
                     stgCurCfgBrgHelloTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.6 integer read-only
The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
                     stgCurCfgBrgForwardDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.7 integer read-only
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
                     stgCurCfgBrgMaxAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.8 integer read-only
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
                     stgCurCfgVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.10 octet string read-only
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
             stgNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2 no-access
The table of Spanning Tree Groups configuration in the new_config.
                 stgNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1 no-access
Information about a particular Spanning Tree Group configuration.
                     stgNewCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.1 integer32 read-only
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
                     stgNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.2 integer read-only
Turn on of off Spanning Tree operation of a particular Spanning Tree Group. Enumeration: 'on': 1, 'off': 2.
                     stgNewCfgDefaultCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.3 integer read-only
Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything. Enumeration: 'default-config': 1.
                     stgNewCfgAddVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.4 integer32 read-only
The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.
                     stgNewCfgRemoveVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.5 integer32 read-only
The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
                     stgNewCfgPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.8 integer read-only
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
                     stgNewCfgBrgHelloTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.9 integer read-only
The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
                     stgNewCfgBrgForwardDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.10 integer read-only
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
                     stgNewCfgBrgMaxAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.11 integer read-only
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
                     stgNewCfgVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.13 octet string read-only
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
             stgCurCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3 no-access
The table of Spanning Tree Group port configuration in the current_config.
                 stgCurCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1 no-access
Information about port configuration of a particular Spanning Tree Group.
                     stgCurCfgStgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.1 integer32 read-only
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
                     stgCurCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.2 integer32 read-only
The port identifier of a particular Spanning Tree Group.
                     stgCurCfgPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.3 integer read-only
Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group. Enumeration: 'on': 1, 'off': 2.
                     stgCurCfgPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.4 integer read-only
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
                     stgCurCfgPortPathCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.5 integer read-only
The contribution of this port to the path cost of paths towards the spanning tree root which include this port.
                     stgCurCfgPortLink 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.6 integer read-only
The type of the port link. Enumeration: 'auto': 1, 'p2p': 2, 'shared': 3.
                     stgCurCfgPortEdge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.7 integer read-only
The state of port edge. Enumeration: 'disabled': 2, 'enabled': 1.
                     stgCurCfgPortFastFwd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.8 integer read-only
The state of port fast forwarding. Enumeration: 'disabled': 2, 'enabled': 1.
             stgNewCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4 no-access
The table of Spanning Tree Group port configuration in the new_config.
                 stgNewCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1 no-access
Information about port configuration of a particular Spanning Tree Group.
                     stgNewCfgStgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.1 integer32 read-only
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
                     stgNewCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.2 integer32 read-only
The port identifier of a particular Spanning Tree Group.
                     stgNewCfgPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.3 integer read-only
Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group. Enumeration: 'on': 1, 'off': 2.
                     stgNewCfgPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.4 integer read-only
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
                     stgNewCfgPortPathCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.5 integer read-only
The contribution of this port to the path cost of paths towards the spanning tree root which include this port.
                     stgNewCfgPortLink 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.6 integer read-only
The type of the port link. Enumeration: 'auto': 1, 'p2p': 2, 'shared': 3.
                     stgNewCfgPortEdge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.7 integer read-only
The state of port edge. Enumeration: 'disabled': 2, 'enabled': 1.
                     stgNewCfgPortFastFwd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.8 integer read-only
The state of port fast forwarding. Enumeration: 'disabled': 2, 'enabled': 1.
         mirroring 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4
             mirrPortMirr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1
                 pmCurCfgPortMirrState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.1 integer read-only
The state of port-based port mirroring. Enumeration: 'disabled': 2, 'enabled': 1.
                 pmNewCfgPortMirrState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.2 integer read-write
The state of port-based port mirroring. Enumeration: 'disabled': 2, 'enabled': 1.
                 pmCurCfgPortMonitorTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3 no-access
The table of monitoring ports.
                     pmCurCfgPortMonitorEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3.1 no-access
A row in the monitoring port table.
                         pmCurCfgPmirrMoniPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3.1.1 integer32 read-only
The monitoring port number.
                         pmCurCfgPmirrMirrPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3.1.2 integer32 read-only
The mirrored port number
                         pmCurCfgPmirrDirection 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3.1.3 integer read-only
The type of traffic to be monitored with respect to the mirrored port. Enumeration: 'both': 3, 'out': 2, 'in': 1.
                 pmNewCfgPortMonitorTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4 no-access
The table of monitoring ports.
                     pmNewCfgPortMonitorEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1 no-access
A row in the monitoring port table.
                         pmNewCfgPmirrMoniPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.1 integer32 read-only
The monitoring port number.
                         pmNewCfgPmirrMirrPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.2 integer32 read-only
The mirrored port number
                         pmNewCfgPmirrDirection 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.3 integer read-only
The type of traffic to be monitored with respect to the mirrored port. Enumeration: 'both': 3, 'out': 2, 'in': 1.
                         pmNewCfgPmirrDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.4 integer read-only
Setting the value to delete(2) will delete the entire row. When read, other(1) is returned. Enumeration: 'other': 1, 'delete': 2.
                         pmNewCfgPmonDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.10 integer read-only
Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned. Enumeration: 'other': 1, 'delete': 2.
         mstCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5
             mstGeneralCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1
                 mstCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.1 integer read-only
Enable or disable MSTP/RSTP Enumeration: 'disabled': 3, 'enabled': 2.
                 mstNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.2 integer read-write
Enable or disable MSTP/RSTP Enumeration: 'disabled': 3, 'enabled': 2.
                 mstCurCfgRegionName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.3 displaystring read-only
The Name for the Region's configuration.
                 mstNewCfgRegionName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.4 displaystring read-write
The Name for the Region's configuration.
                 mstCurCfgRegionVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.5 integer read-only
Version of the MST Region.
                 mstNewCfgRegionVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.6 integer read-write
Version of the MST Region.
                 mstCurCfgMaxHopCount 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.7 integer read-only
Indicates the maximum hop count value.
                 mstNewCfgMaxHopCount 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.8 integer read-write
Indicates the maximum hop count value.
                 mstCurCfgStpMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.9 integer read-only
The version of Spanning Tree Protocal the bridge is currently running. Enumeration: 'mstp': 1, 'rstp': 2.
                 mstNewCfgStpMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.1.10 integer read-write
The version of Spanning Tree Protocal the bridge is currently running. Enumeration: 'mstp': 1, 'rstp': 2.
             mstCistCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2
                 mstCistDefaultCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.1 integer read-write
Setting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not mean anything. Enumeration: 'default': 1.
                 mstCistBridgeCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2
                     mstCistCurCfgBridgePriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.1 integer read-only
The value of the writable portion of the Brigde Identifier comprising of the first two octets.
                     mstCistNewCfgBridgePriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.2 integer read-write
The value of the writable portion of the Brigde Identifier comprising of the first two octets.
                     mstCistCurCfgBridgeMaxAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.5 integer read-only
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
                     mstCistNewCfgBridgeMaxAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.6 integer read-write
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
                     mstCistCurCfgBridgeForwardDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.7 integer read-only
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
                     mstCistNewCfgBridgeForwardDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.8 integer read-write
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
                     mstCistCurCfgVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.9 octet string read-only
The vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented vlan applied to the CIST group. 0 - The represented vlan not applied to the group
                     mstCistNewCfgVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.10 octet string read-only
The vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented vlan applied to the CIST group. 0 - The represented vlan not applied to the group
                     mstCistNewCfgAddVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.2.11 integer32 read-only
The vlan to be added to the CIST Group. A '0' value is returned when read.
                 mstCistCurCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3 no-access
The table of CIST Port configuration.
                     mstCistCurCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1 no-access
Information about a particular CIST Port configuration.
                         mstCistCurCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.1 integer32 read-only
The port number of the port for which this entry contains spanning tree configuration.
                         mstCistCurCfgPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.2 integer read-only
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
                         mstCistCurCfgPortPathCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.3 integer read-only
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
                         mstCistCurCfgPortLinkType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.4 integer read-only
The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Enumeration: 'auto': 1, 'p2p': 2, 'shared': 3.
                         mstCistCurCfgPortEdge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.5 integer read-only
The value of the Edge Port parameter. Enumeration: 'disabled': 2, 'enabled': 1.
                         mstCistCurCfgPortStpState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.6 integer read-only
Turn port's Spanning Tree on/off. Enumeration: 'on': 1, 'off': 2.
                         mstCistCurCfgPortHelloTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.7 integer read-only
The amount of time between the transmission of Configuration Port PDUs in seconds.
                 mstCistNewCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4 no-access
The table of CIST Port configuration.
                     mstCistNewCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1 no-access
Information about a particular CIST Port configuration.
                         mstCistNewCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.1 integer32 read-only
The port number of the port for which this entry contains spanning tree configuration.
                         mstCistNewCfgPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.2 integer read-only
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
                         mstCistNewCfgPortPathCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.3 integer read-only
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
                         mstCistNewCfgPortLinkType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.4 integer read-only
The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Enumeration: 'auto': 1, 'p2p': 2, 'shared': 3.
                         mstCistNewCfgPortEdge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.5 integer read-only
The value of the Edge Port parameter. Enumeration: 'disabled': 2, 'enabled': 1.
                         mstCistNewCfgPortStpState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.6 integer read-only
Turn port's Spanning Tree on/off. Enumeration: 'on': 1, 'off': 2.
                         mstCistNewCfgPortHelloTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.7 integer read-only
The amount of time between the transmission of Configuration Port PDUs in seconds.
         lacp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6
             lacpCurSystemPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.1 integer read-only
A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
             lacpNewSystemPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.2 integer read-write
A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
             lacpCurSystemTimeoutTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.5 integer read-only
If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3). Enumeration: 'short': 3, 'long': 90.
             lacpNewSystemTimeoutTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.6 integer read-write
If a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3). Enumeration: 'short': 3, 'long': 90.
             lacpCurPortCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7 no-access
The table of LACP port configuration.
                 lacpCurPortCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1 no-access
A row in the LACP port configuration table.
                     lacpCurPortCfgTableId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1.1 integer32 read-only
LACP port number.
                     lacpCurPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1.2 integer read-only
LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer. Enumeration: 'active': 2, 'passive': 3, 'off': 1.
                     lacpCurPortActorPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1.3 integer read-only
The priority value assigned to this Aggregation Port. This 16-bit value is read-only.
                     lacpCurPortActorAdminKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1.4 integer read-only
The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
             lacpNewPortCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8 no-access
The table of LACP port configuration.
                 lacpNewPortCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1 no-access
A row in the LACP port configuration table.
                     lacpNewPortCfgTableId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1.1 integer32 read-only
LACP port number.
                     lacpNewPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1.2 integer read-write
LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer. Enumeration: 'active': 2, 'passive': 3, 'off': 1.
                     lacpNewPortActorPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1.3 integer read-write
The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
                     lacpNewPortActorAdminKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1.4 integer read-write
The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
         thash 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7
             thashL2 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1
                 l2ThashCurCfgSmacState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1.1 integer read-only
Enable or disable smac hash. Enumeration: 'enable': 1, 'disable': 2.
                 l2ThashNewCfgSmacState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1.2 integer read-write
Enable or disable smac hash. Enumeration: 'enable': 1, 'disable': 2.
                 l2ThashCurCfgDmacState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1.3 integer read-only
Enable or disable dmac hash. Enumeration: 'enable': 1, 'disable': 2.
                 l2ThashNewCfgDmacState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1.4 integer read-write
Enable or disable dmac hash. Enumeration: 'enable': 1, 'disable': 2.
                 l2ThashCurCfgSipState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1.5 integer read-only
Enable or disable sip hash. Enumeration: 'enable': 1, 'disable': 2.
                 l2ThashNewCfgSipState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1.6 integer read-write
Enable or disable sip hash. Enumeration: 'enable': 1, 'disable': 2.
                 l2ThashCurCfgDipState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1.7 integer read-only
Enable or disable dip hash. Enumeration: 'enable': 1, 'disable': 2.
                 l2ThashNewCfgDipState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.7.1.8 integer read-write
Enable or disable dip hash. Enumeration: 'enable': 1, 'disable': 2.
         l2GeneralCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.8
             upfastCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.8.1 integer read-only
Enable or disable uplink fast Enumeration: 'enable': 1, 'disable': 2.
             upfastNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.8.2 integer read-write
Enable or disable uplink fast Enumeration: 'enable': 1, 'disable': 2.
             updateCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.8.3 integer read-only
UplinkFast station update rate: packets per second
             updateNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.8.4 integer read-write
UplinkFast station update rate: packets per second
             pvstCompatibilityCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.8.9 integer read-only
Enable or disable PVST+ compatibility Enumeration: 'enable': 1, 'disable': 2.
             pvstCompatibilityNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.8.10 integer read-write
Enable or disable PVST+ compatibility Enumeration: 'enable': 1, 'disable': 2.
         ufd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9
             ufdGeneralCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1
                 ufdCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.1 integer read-only
Enable or disable UFD state Enumeration: 'disabled': 2, 'enabled': 1.
                 ufdNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.2 integer read-write
Enable or disable UFD state Enumeration: 'disabled': 2, 'enabled': 1.
                 ufdCurCfgLtMPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.3 octet string read-only
The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM
                 ufdNewCfgLtMPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.4 octet string read-only
The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM
                 ufdCurCfgLtMTrunks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.5 octet string read-only
The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM
                 ufdNewCfgLtMTrunks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.6 octet string read-write
The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM
                 ufdCurCfgLtMAdminkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.7 integer read-only
The LtM admin key.
                 ufdNewCfgLtMAdminkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.8 integer read-only
The LtM admin key.
                 ufdCurCfgLtDPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.9 octet string read-only
The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD
                 ufdNewCfgLtDPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.10 octet string read-only
The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD
                 ufdCurCfgLtDTrunks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.11 octet string read-only
The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD
                 ufdNewCfgLtDTrunks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.12 octet string read-write
The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD
                 ufdLtDAdminkeyMaxEnt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.13 integer32 read-only
The maximum number of rows in the LtD admin key configuration table.
                 ufdLtDAdminkeyCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.14 no-access
The table of LtD admin key configuration.
                       ufdLtDAdminkeyCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.14.1 no-access
A row in the LtD admin key table.
                           ufdLtDAdminkeyCurCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.14.1.1 integer read-only
The LtD admin key.
                 ufdLtDAdminkeyNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.15 no-access
The table of LtD admin key configuration.
                       ufdLtDAdminkeyNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.15.1 no-access
A row in the LtD admin key table.
                           ufdLtDAdminkeyNewCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.15.1.1 integer read-only
The LtD admin key.
                 ufdNewCfgAddLtMPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.16 integer read-write
The port to be added to LtM. A '0' value is returned when read.
                 ufdNewCfgRemoveLtMPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.17 integer read-write
The port to be removed from LtM. A '0' value is returned when read.
                 ufdNewCfgAddLtMTrunk 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.18 integer read-write
The trunk to be added to LtM. A '0' value is returned when read.
                 ufdNewCfgRemoveLtMTrunk 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.19 integer read-write
The trunk to be removed from LtM. A '0' value is returned when read.
                 ufdNewCfgAddLtMAdminkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.20 integer read-write
The admin key to be added to LtM. A '0' value is returned when read.
                 ufdNewCfgRemoveLtMAdminkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.21 integer read-write
The admin key to be removed from LtM. A '0' value is returned when read.
                 ufdNewCfgAddLtDPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.22 integer read-write
The port to be added to LtD. A '0' value is returned when read.
                 ufdNewCfgRemoveLtDPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.23 integer read-write
The port to be removed from LtM. A '0' value is returned when read.
                 ufdNewCfgAddLtDTrunk 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.24 integer read-write
The trunk to be added to LtM. A '0' value is returned when read.
                 ufdNewCfgRemoveLtDTrunk 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.25 integer read-write
The trunk to be removed from LtD. A '0' value is returned when read.
                 ufdNewCfgAddLtDAdminkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.26 integer read-write
The admin key to be added to LtD. A '0' value is returned when read.
                 ufdNewCfgRemoveLtDAdminkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.27 integer read-write
The admin key to be removed from LtD. A '0' value is returned when read.
                 ufdCurCfgGlobalState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.28 integer read-only
Current global Failover settings. Enumeration: 'disabled': 2, 'enabled': 1.
                 ufdNewCfgGlobalState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.29 integer read-write
New global Failover settings. Enumeration: 'disabled': 2, 'enabled': 1.
         dot1x 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11
               dot1xCurStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.1 integer read-only
Dot1x status Enumeration: 'enable': 0, 'disable': 1.
               dot1xNewStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.2 integer read-write
Dot1x status Enumeration: 'enable': 0, 'disable': 1.
               dot1xCurCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3 no-access
The table of 8021x configuration in the Current_config.
                   dot1xCurCfgPortEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1 no-access
Information about 8021x Port Config
                       dot1xCurCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.1 integer32 read-only
The 8021x Port number for which the table is related.
                       dot1xCurCfgPortMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.2 integer read-only
Port authenticaton mode forceUnauth(0), auto(1), forceAuth(2) Enumeration: 'auto': 1, 'forceUnauth': 0, 'forceAuth': 2.
                       dot1xCurCfgPortQtPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.3 integer read-only
Quiet period (0-65535)
                       dot1xCurCfgPortTxPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.4 integer read-only
Tx Period
                       dot1xCurCfgPortSupTmout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.5 integer read-only
Supplicant timeout (1..65535)
                       dot1xCurCfgPortSrvTmout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.6 integer read-only
Server timeout (1..65535)
                       dot1xCurCfgPortMaxRq 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.7 integer read-only
Maximum numer of requests (1..10)
                       dot1xCurCfgPortRaPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.8 integer read-only
Reautentication period (0..604800)
                       dot1xCurCfgPortReAuth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.9 integer read-only
ReAuthentication state off(0), on(1) Enumeration: 'on': 1, 'off': 0.
               dot1xNewCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4 no-access
The table of 8021x configuration in the new_config.
                   dot1xNewCfgPortEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1 no-access
Information about 8021x Port Config
                       dot1xNewCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.1 integer32 read-only
The 8021x Port number for which the table is related.
                       dot1xNewCfgPortMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.2 integer read-only
Port authentication mode forceUnauth(0), auto(1), forceAuth(2) Enumeration: 'auto': 1, 'forceUnauth': 0, 'forceAuth': 2.
                       dot1xNewCfgPortQtPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.3 integer read-only
Quiet period (0..65535)
                       dot1xNewCfgPortTxPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.4 integer read-only
Tx Period (1..65535)
                       dot1xNewCfgPortSupTmout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.5 integer read-only
Supplicant Timeout (1..65535)
                       dot1xNewCfgPortSrvTmout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.6 integer read-only
Server Timeout (1..65535)
                       dot1xNewCfgPortMaxRq 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.7 integer read-only
Maximum number of requests (1..10)
                       dot1xNewCfgPortRaPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.8 integer read-only
Reauthentication period (1..604800)
                       dot1xNewCfgPortReAuth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.9 integer read-only
Reauthentication state off(0), on(1) Enumeration: 'on': 1, 'off': 0.
                       dot1xNewCfgPortDefault 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.10 integer read-only
Port default settings Enumeration: 'apply': 1, 'other': 0.
                       dot1xNewCfgPortApplyGlobal 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.4.1.11 integer read-only
Apply Global config Enumeration: 'apply': 1, 'other': 0.
               dot1xCurCfgGlobalTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5
                   dot1xCurCfgGlobalMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5.1 integer read-only
Autehtication Mode forceUnauth(0), auto(1), forceAuth(2) Enumeration: 'auto': 1, 'forceUnauth': 0, 'forceAuth': 2.
                   dot1xCurCfgGlobalQtPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5.2 integer read-only
Quiet period (0..65535)
                   dot1xCurCfgGlobalTxPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5.3 integer read-only
Tx period (1..65535)
                   dot1xCurCfgGlobalSupTmout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5.4 integer read-only
Supplicant timeout (1..65535)
                   dot1xCurCfgGlobalSrvTmout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5.5 integer read-only
Server timeout (1..65535)
                   dot1xCurCfgGlobalMaxRq 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5.6 integer read-only
Maximum number of requests (1..10)
                   dot1xCurCfgGlobalRaPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5.7 integer read-only
Reauthentication period (0..604800)
                   dot1xCurCfgGlobalReAuth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.5.8 integer read-only
Enumeration: 'on': 1, 'off': 0.
               dot1xNewCfgGlobalTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6
                   dot1xNewCfgGlobalMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6.1 integer read-only
Authentication Mode Enumeration: 'auto': 1, 'forceUnauth': 0, 'forceAuth': 2.
                   dot1xNewCfgGlobalQtPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6.2 integer read-only
Quiet Period (0..65535)
                   dot1xNewCfgGlobalTxPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6.3 integer read-only
Tx Period (1..65535)
                   dot1xNewCfgGlobalSupTmout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6.4 integer read-only
Supplicand timeout (1..65535)
                   dot1xNewCfgGlobalSrvTmout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6.5 integer read-only
Server timeout (1..65535)
                   dot1xNewCfgGlobalMaxRq 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6.6 integer read-only
Maximum number of requests (1..10)
                   dot1xNewCfgGlobalRaPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6.7 integer read-only
Reauthentication period (1..604800)
                   dot1xNewCfgGlobalReAuth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.6.8 integer read-only
Reauthentication status Enumeration: 'on': 1, 'off': 0.
         fdb 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12
               fdbGeneralCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.1
                   fdbCurCfgAgingTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.1.1 integer32 read-only
Fdb current aging time
                   fdbNewCfgAgingTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.1.2 integer32 read-write
Fdb new aging time.
               fdbNewCfgStaticTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.2 no-access
The table of FDB static entries.
                   fdbNewCfgStaticEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.2.1 no-access
A row in the fdb table.
                       fdbNewCfgEntryIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.2.1.1 integer32 read-only
The fdb entry index
                       fdbNewCfgAddVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.2.1.2 integer32 read-only
Add vlan for fdb entry index
                       fdbNewCfgAddPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.2.1.3 integer32 read-only
The MAC address port number.
                       fdbNewCfgAddMac 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.2.1.4 physaddress read-only
Add a fdb entry.
                       fdbNewCfgDelStaticEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.2.1.5 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
               fdbCurCfgStaticTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.3 no-access
The table of FDB static entries.
                   fdbCurCfgStaticEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.3.1 no-access
A row in the fdb table.
                       fdbCurCfgEntryIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.3.1.1 integer32 read-only
The fdb entry index
                       fdbCurCfgVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.3.1.2 integer32 read-only
Add vlan for fdb entry index
                       fdbCurCfgPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.3.1.3 integer32 read-only
The MAC address port number.
                       fdbCurCfgMac 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.12.3.1.4 physaddress read-only
Add a fdb entry.
     layer2Stats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2
         fdbStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.1
             fdbStatsCurrent 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.1.3 gauge32 read-only
Current number of entries in the Forwarding Database.
             fdbStatsHiwat 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.1.4 integer32 read-only
Highest number of entries recorded at any given time in the Forwarding Database.
             fdbStatsClear 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.1.11 integer read-write
Clear FDB statistics Enumeration: 'clear': 2, 'ok': 1.
         stpStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2
             stgStatsPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2.1 no-access
The table of Spanning Tree Group port statistics.
                 stgStatsPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2.1.1 no-access
Statistics about port of a particular Spanning Tree Group.
                     stgStatsStpIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2.1.1.1 integer32 read-only
The identifier of a particular Spanning Tree Group.
                     stgStatsPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2.1.1.2 integer32 read-only
The port identifier of a particular Spanning Tree Group.
                     stgStatsPortRcvCfgBpdus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2.1.1.3 counter32 read-only
Number of Configuration BPDU's received on this port.
                     stgStatsPortRcvTcnBpdus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2.1.1.4 counter32 read-only
Number of TCN BPDU's received on this port.
                     stgStatsPortXmtCfgBpdus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2.1.1.5 counter32 read-only
Number of Configuration BPDU's trasmitted from the port.
                     stgStatsPortXmtTcnBpdus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.2.1.1.6 counter32 read-only
Number of TCN BPDU's trasmitted from the port.
         lacpStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3
             lacpStatsTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1 no-access
The table of LACP Stats.
                 lacpStatsTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1 no-access
Lacp status info.
                     lacpStatsIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.1 integer32 read-only
Index
                     lacpdusRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.2 integer32 read-only
Valid LACPDUs received
                     markerpdusRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.3 integer32 read-only
Valid Marker PDUs received
                     markerresponsepdusRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.4 integer32 read-only
Valid Marker Rsp PDUs received
                     unknownRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.5 integer32 read-only
Unknown version/TLV type
                     illegalRx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.6 integer32 read-only
Illegal subtype received
                     lacpdusTx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.7 integer32 read-only
LACPDUs transmitted
                     markerpdusTx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.8 integer32 read-only
Market PDUs transmitted
                     markerresponsepdusTx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.9 integer32 read-only
Marker Rsp PDUs transmitted
                     lacpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.3.1.1.10 integer read-write
Setting this to clear(2) results in clearing the LACP statistics. Enumeration: 'clear': 2, 'ok': 1.
         ufdStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.4
             ufdNoLtMLinkFailure 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.4.1 integer32 read-only
             ufdNoLtMLinkBlockingState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.4.2 integer32 read-only
             ufdNoLtDAutoDisabled 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.4.3 integer32 read-only
             ufdClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.2.4.4 integer read-write
Setting this value to clear(2) clears the UFD stats. Enumeration: 'clear': 2, 'ok': 1.
     layer2Info 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3
         cistInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1
             cistGeneralInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1
                 cistRoot 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.1 bridgeid read-only
The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
                 cistRootPathCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.2 integer32 read-only
The cost of the path to the CIST Root as seen from this bridge.
                 cistRootPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.3 integer32 read-only
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
                 cistRootMaxAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.5 integer32 read-only
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
                 cistRootForwardDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.6 integer32 read-only
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
                 cistRegionalRoot 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.7 bridgeid read-only
The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
                 cistRegionalPathCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.8 integer32 read-only
The Cost of the path to the CIST Regional Root as seen from this bridge.
                 cistBridgePriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.9 integer read-only
The value of the writable portion of the Brigde Identifier comprising of the first two octets.
                 cistBridgeMaxAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.10 integer read-only
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
                 cistBridgeForwardDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.11 integer read-only
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
                 cistMaxHopCount 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.12 integer read-only
Indicates the maximum hop count value.
                 mstpDigest 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.1.13 displaystring read-only
The digest of the mstp.
             cistInfoPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2 no-access
The table of CIST Port information.
                 cistInfoPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1 no-access
Information about a particular CIST Port.
                     cistInfoPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.1 integer32 read-only
The port number of the port for which this entry contains spanning tree configuration.
                     cistInfoPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.2 integer32 read-only
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
                     cistInfoPortPathCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.3 integer32 read-only
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
                     cistInfoPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.4 integer read-only
Current state of the Port as defined by the Common spanning tree protocol. Enumeration: 'disabled': 1, 'discarding': 2, 'forwarding': 5, 'learning': 4.
                     cistInfoPortRole 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.5 integer read-only
Selected Port Role of the port for this spanning tree instance. Enumeration: 'backup': 3, 'alternate': 2, 'designated': 5, 'disabled': 1, 'master': 6, 'unknown': 7, 'root': 4.
                     cistInfoPortDesignatedBridge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.6 bridgeid read-only
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
                     cistInfoPortDesignatedPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.7 octet string read-only
The Port identifier of the port on the Designated Bridge for this port's segment.
                     cistInfoPortLinkType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.8 integer read-only
The point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port is being treated as having a shared media connection. Enumeration: 'shared': 2, 'p2p': 1, 'unknown': 3.
                     cistInfoPortHelloTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.1.2.1.9 integer read-only
The amount of time between the transmission of Configuration Port PDUs in seconds.
         fdbInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2
             fdbClear 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.1 integer read-write
Setting this value to clear(2) clears the entire master FDB. Enumeration: 'clear': 2, 'ok': 1.
             fdbTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2 no-access
The table of FDB entries.
                 fdbEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1 no-access
A row in the FDB table
                     fdbMacAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1.1 physaddress read-only
The MAC address for the FDB entry.
                     fdbVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1.2 integer32 read-only
The VLAN ID for the FDB entry.
                     fdbSrcPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1.3 integer32 read-only
Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address.
                     fdbState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1.4 integer read-only
The state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a destination address forward(2) : the MAC address has been learned by the switch trunk(3) : frames with this MAC address are forwarded to trunk group Enumeration: 'forward': 2, 'unknown': 1, 'trunk': 3.
                     fdbRefSps 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1.5 displaystring read-only
The referenced SPs associated with this FDB entry.
                     fdbLearnedPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1.6 integer32 read-only
The learned port associated with this FDB entry.
                     fdbSrcTrunk 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1.7 integer32 read-only
Either the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk.
                     fdbStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.2.2.1.8 integer32 read-only
'1' if it is permanent '0' if it is not permanent
         stpInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3
             stpInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1 no-access
The table of Spanning Tree Group information.
                 stpInfoTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1 no-access
Information about a particular Spanning Tree Group.
                     stpInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.1 integer32 read-only
The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
                     stpInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.2 integer read-only
Turn on of off Spanning Tree operation of a particular Spanning Tree Group. Enumeration: 'on': 1, 'off': 2.
                     stgInfoVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.3 octet string read-only
The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning tree
                     stpInfoTimeSinceTopChange 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.4 timeticks read-only
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
                     stpInfoTopChanges 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.5 counter32 read-only
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
                     stpInfoDesignatedRoot 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.6 bridgeid read-only
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
                     stpInfoRootCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.7 integer32 read-only
The cost of the path to the root as seen from this bridge.
                     stpInfoRootPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.8 integer32 read-only
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
                     stpInfoMaxAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.9 integer32 read-only
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                     stpInfoHelloTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.10 integer32 read-only
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                     stpInfoForwardDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.11 integer32 read-only
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.
                     stpInfoHoldTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.12 integer32 read-only
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
                     stpInfoBrgPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.13 integer read-only
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
                     stpInfoBrgHelloTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.14 integer read-only
The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
                     stpInfoBrgForwardDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.15 integer read-only
The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
                     stpInfoBrgMaxAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.16 integer read-only
The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
                     stpInfoAgingTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.1.1.17 integer read-only
The timeout period in seconds for aging out dynamically learned forwarding information.
             stpInfoPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2 no-access
The table of Spanning Tree Group port information.
                 stpInfoPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1 no-access
Information about port configuration for a particular Spanning Tree Group.
                     stpInfoPortStpIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.1 integer32 read-only
The identifier of a particular Spanning Tree Group.
                     stpInfoPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.2 integer32 read-only
The port identifier of a particular Spanning Tree Group.
                     stpInfoPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.3 integer read-only
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled, this object will have a value of disabled(1). Enumeration: 'listening': 3, 'disabled': 1, 'broken': 6, 'learning': 4, 'forwarding': 5, 'blocking': 2.
                     stpInfoPortDesignatedRoot 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.4 bridgeid read-only
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
                     stpInfoPortDesignatedCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.5 integer32 read-only
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
                     stpInfoPortDesignatedBridge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.6 bridgeid read-only
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
                     stpInfoPortDesignatedPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.7 octet string read-only
The Port Identifier of the port on the Designated Bridge for this port's segment.
                     stpInfoPortForwardTransitions 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.8 counter32 read-only
The number of times this port has transitioned from the Learning state to the Forwarding state.
                     stpInfoPortPathCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.3.2.1.9 integer32 read-only
The path cost of the port.
         lacpInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4
             lacpInfoAggrTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1 no-access
The table of LACP aggregator information.
                 lacpInfoAggrTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1 no-access
Information about a LACP aggregator.
                     lacpInfoAggrIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.1 integer32 read-only
The aggregator identifier.
                     lacpInfoAggrId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.2 integer32 read-only
                     lacpInfoAggrMac 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.3 displaystring read-only
                     lacpInfoAggrActSysPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.4 integer32 read-only
                     lacpInfoAggrActSysId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.5 displaystring read-only
                     lacpInfoAggrIndivState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.6 integer read-only
Enumeration: 'false': 2, 'true': 1.
                     lacpInfoAggrActAdminKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.7 integer32 read-only
                     lacpInfoAggrActOperKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.8 integer32 read-only
                     lacpInfoAggrPartSysPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.9 integer32 read-only
                     lacpInfoAggrPartSysId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.10 displaystring read-only
                     lacpInfoAggrPartOperKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.11 integer32 read-only
                     lacpInfoAggrReadyState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.12 integer read-only
Enumeration: 'false': 2, 'true': 1.
                     lacpInfoAggrNumPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.13 integer32 read-only
                     lacpInfoAggrPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.1.1.14 displaystring read-only
             lacpInfoPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2
                 lacpInfoPortGeneralTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1 no-access
The table of LACP port general information.
                     lacpInfoPortGeneralTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1 no-access
General information about a LACP port.
                         lacpInfoPortGeneralIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.1 integer32 read-only
The port identifier.
                         lacpInfoPortLacpEna 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.2 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortAdminEna 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.3 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActSysId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.4 displaystring read-only
                         lacpInfoPortActSysPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.5 integer32 read-only
                         lacpInfoPortActAdminKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.6 integer32 read-only
                         lacpInfoPortActOperKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.7 integer32 read-only
                         lacpInfoPortActPortNum 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.8 integer32 read-only
                         lacpInfoPortActPortPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.9 integer32 read-only
                         lacpInfoPortIndivState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.10 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoSelAggrId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.11 integer32 read-only
                         lacpInfoAttAggrId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.12 integer32 read-only
                         lacpInfoPortReadyN 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.13 integer read-only
True value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port. Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortNtt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.14 integer read-only
Need to transmit flag. True indicates that there is new protocol information that should be transmitted on the link. Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortSelected 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.15 integer read-only
Selected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently precent the port from being enabled as part of the aggregation, and so the port is being held in standby condition. Enumeration: 'standby': 3, 'selected': 1, 'unselected': 2.
                         lacpInfoPortMoved 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.16 integer read-only
Port Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been used by received in an incoming LACPDU on a different port. Enumeration: 'false': 2, 'true': 1.
                         lacpInfoCollDetState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.17 integer read-only
Enumeration: 'on': 1, 'off': 2.
                         lacpInfoPortRxState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.18 displaystring read-only
                         lacpInfoPortMuxState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.19 displaystring read-only
                         lacpInfoPortPerState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.1.1.20 displaystring read-only
                 lacpInfoPortAdminTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2 no-access
The table of LACP port admin information.
                     lacpInfoPortAdminTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1 no-access
Admin information about a LACP port.
                         lacpInfoPortAdminIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.1 integer32 read-only
The port identifier.
                         lacpInfoPortActAdPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.7 displaystring read-only
The state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
                         lacpInfoPortActAdActiv 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.8 integer read-only
Enumeration: 'active': 1, 'passive': 2.
                         lacpInfoPortActAdSync 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.9 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActAdDef 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.10 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActAdTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.11 integer read-only
Enumeration: 'short': 1, 'long': 2.
                         lacpInfoPortActAdColl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.12 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActAdExp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.13 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActAdAggr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.14 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActAdDist 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.2.1.15 integer read-only
Enumeration: 'false': 2, 'true': 1.
                 lacpInfoPortOperTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3 no-access
The table of LACP port oper information.
                     lacpInfoPortOperTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1 no-access
Oper information about a LACP port.
                         lacpInfoPortOperIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.1 integer32 read-only
The port identifier.
                         lacpInfoPortPartOpSysPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.2 integer32 read-only
                         lacpInfoPortPartOpSysId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.3 displaystring read-only
                         lacpInfoPortPartOpKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.4 integer32 read-only
                         lacpInfoPortPartOpPortNum 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.5 integer32 read-only
                         lacpInfoPortPartOpPortPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.6 integer32 read-only
                         lacpInfoPortActOpPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.7 displaystring read-only
The state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
                         lacpInfoPortActOpActiv 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.8 integer read-only
Enumeration: 'active': 1, 'passive': 2.
                         lacpInfoPortActOpSync 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.9 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActOpDef 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.10 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActOpTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.11 integer read-only
Enumeration: 'short': 1, 'long': 2.
                         lacpInfoPortActOpColl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.12 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActOpExp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.13 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActOpAggr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.14 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortActOpDist 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.15 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortPartOpPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.16 displaystring read-only
The state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation and Distributing. If all of them are 0 then the state is showed as 0x0, else it is displayed a blank state which mean is not a NULL state
                         lacpInfoPortPartOpActiv 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.17 integer read-only
Enumeration: 'active': 1, 'passive': 2.
                         lacpInfoPortPartOpSync 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.18 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortPartOpDef 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.19 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortPartOpTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.20 integer read-only
Enumeration: 'short': 1, 'long': 2.
                         lacpInfoPortPartOpColl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.21 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortPartOpExp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.22 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortPartOpAggr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.23 integer read-only
Enumeration: 'false': 2, 'true': 1.
                         lacpInfoPortPartOpDist 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.4.2.3.1.24 integer read-only
Enumeration: 'false': 2, 'true': 1.
         dot1xInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5
             dot1xInfoPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.1 no-access
The table of 8021x configuration in the Current_config.
                 dot1xInfoPortEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.1.1 no-access
Information about 8021x Port Config
                     dot1xInfoPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.1.1.1 integer32 read-only
The 8021x Port number for which the table is related.
                     dot1xInfoPortAuthMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.1.1.2 integer read-only
Authentication mode Enumeration: 'auto': 1, 'forceUnauth': 0, 'forceAuth': 2.
                     dot1xInfoPortAuthStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.1.1.3 integer read-only
Authentication status Enumeration: 'authorized': 0, 'unauthorized': 1.
                     dot1xInfoPortCtrlDir 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.1.1.4 integer read-only
Controlled Directions Enumeration: 'both': 0, 'in': 1.
                     dot1xInfoPortAuthPAEState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.1.1.5 integer read-only
Authenticator PAE State Enumeration: 'aborting': 5, 'authenticated': 4, 'disconnected': 1, 'forceauth': 7, 'forceunauth': 8, 'held': 6, 'connecting': 2, 'initialize': 0, 'authenticating': 3.
                     dot1xInfoPortBackAuthState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.1.1.6 integer read-only
Backend authenticator PAE state Enumeration: 'success': 2, 'request': 0, 'initialize': 6, 'idle': 5, 'timeout': 4, 'fail': 3, 'response': 1.
             dot1xSystemInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.2
                 dot1xSystemCapability 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.2.1 integer read-only
System capability Enumeration: 'authenticator': 0, 'supplicant': 1, 'unknown': 3, 'authenticatorAndSupplicant': 2.
                 dot1xSystemStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.2.2 integer read-only
System status Enumeration: 'disabled': 1, 'enabled': 0.
                 dot1xSystemProtoVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.5.2.3 integer read-only
Protocol version
         dot1pInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6
             dot1pInfoPriorityCOSTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.1 no-access
The table of current priority to COS queue information.
                 dot1pInfoPriorityCOSEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.1.1 no-access
Current information about 8021p priority to COS queue.
                     dot1pInfoPriorityIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.1.1.1 integer read-only
The 8021p priority for which the table is related.
                     dot1pInfoPriorityCOSQueue 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.1.1.2 integer read-only
The 8021p priority COSq.
                     dot1pInfoPriorityCOSWeight 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.1.1.3 integer read-only
The 8021p priority weight.
             dot1pInfoPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.2 no-access
The table of 8021p port priority configuration in the Current_config.
                 dot1pInfoPortEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.2.1 no-access
Information about 8021p Port Priority
                     dot1pInfoPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.2.1.1 integer32 read-only
The 8021p Port number for which the table is related.
                     dot1pInfoPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.2.1.2 integer read-only
The 8021p Port number for which the table is related.
                     dot1pInfoPortCOSq 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.2.1.3 integer read-only
The 8021p port COSq.
                     dot1pInfoPortWeight 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.6.2.1.4 integer read-only
The 8021p port weight.
         genInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.7
             generalInfoStpUplinkFast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.7.1 integer read-only
STP uplink fast mode Enumeration: 'disabled': 2, 'enabled': 1.
             generalInfoUplinkFastRate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.7.2 integer read-only
STP fast uplink rate.
         vlanInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.8
             vlanInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.8.1 no-access
The table of VLAN information.
                 vlanInfoTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.8.1.1 no-access
Information about a particular VLAN.
                     vlanInfoId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.8.1.1.1 integer read-only
The VLAN identifier.
                     vlanInfoName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.8.1.1.2 displaystring read-only
The VLAN name.
                     vlanInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.8.1.1.3 integer read-only
Enable or disable, VLAN state information Enumeration: 'disabled': 3, 'enabled': 2.
                     vlanInfoPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.8.1.1.4 octet string read-only
The port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLAN
         trunkGroupInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9
             trunkGroupInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.1 no-access
The table of trunk group information.
                 trunkGroupInfoTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.1.1 no-access
A row in trunk group information table.
                     trunkGroupInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.1.1.1 integer32 read-only
The identifier of the trunk group.
                     trunkGroupInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.1.1.2 integer read-only
Trunk group state. Enumeration: 'disabled': 2, 'enabled': 1.
                     trunkGroupInfoPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.1.1.3 octet string read-only
The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk group
                     trunkGroupInfoProtocol 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.1.1.4 integer read-only
Trunk group protocol Static - static trunk group Lacp - dynamic trunk group Enumeration: 'lacp': 2, 'static': 1.
                     trunkGroupInfoStgs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.1.1.5 octet string read-only
The stg list the trunk group is in. The stgs are presented in bitmap format.
             trunkGroupInfoPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.2 no-access
The table of Trunk Group Info.
                 trunkGroupInfoPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.2.1 no-access
A row in the Trunk Info table.
                     trunkGroupInfoPortTrunkId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.2.1.1 integer32 read-only
The Trunk identifier.
                     trunkGroupInfoPortPortId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.2.1.2 integer32 read-only
The Port identifier.
                     trunkGroupInfoPortStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.3.9.2.1.3 integer read-only
The Port Status. Enumeration: 'down': 0, 'forwarding': 2, 'blocking': 1.
     layer2Oper 1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.4
 layer3 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3
     layer3Configs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1
         ipInterfaceCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1
             ipInterfaceTableMax 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.1 integer32 read-only
The maximum number of rows in the IP interface table.
             ipCurCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2 no-access
The table of IP interface configuration.
                 ipCurCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2.1 no-access
A row in the Ip interface table
                     ipCurCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2.1.1 integer32 read-only
The interface number for which the IP information is related.
                     ipCurCfgIntfAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2.1.2 ipaddress read-only
The IP address of the interface.
                     ipCurCfgIntfMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2.1.3 ipaddress read-only
The subnet mask of the interface.
                     ipCurCfgIntfBroadcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2.1.4 ipaddress read-only
The broadcast address of the interface.
                     ipCurCfgIntfVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2.1.5 integer read-only
The VLAN associated with the interface.
                     ipCurCfgIntfState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2.1.6 integer read-only
The state of the interface. Enumeration: 'disabled': 3, 'enabled': 2.
                     ipCurCfgIntfBootpRelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.2.1.7 integer read-only
Enable/disable BOOTP relay. Enumeration: 'disabled': 2, 'enabled': 1.
             ipNewCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3 no-access
The table of interface configuration in the New Configuration Block.
                 ipNewCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3.1 no-access
A row in the Ip interface table
                     ipNewCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3.1.1 integer32 read-only
The interface number for which the IP information is related.
                     ipNewCfgIntfAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3.1.2 ipaddress read-only
The IP address of the interface.
                     ipNewCfgIntfMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3.1.3 ipaddress read-only
The subnet mask of the interface.
                     ipNewCfgIntfVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3.1.5 integer read-only
The VLAN associated with the interface.
                     ipNewCfgIntfState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3.1.6 integer read-only
The state of the interface. Enumeration: 'disabled': 3, 'enabled': 2.
                     ipNewCfgIntfDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3.1.7 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                     ipNewCfgIntfBootpRelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.1.3.1.8 integer read-only
Enable/disable BOOTP relay. Enumeration: 'disabled': 2, 'enabled': 1.
         ipGatewayCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2
             ipGatewayTableMax 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.3 integer32 read-only
The maximum number of rows in the IP gateway table.
             ipCurCfgGwTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.4 no-access
The table of gateways in the Current configuration Block.
                 ipCurCfgGwEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.4.1 no-access
A row in the Ip gateway table
                     ipCurCfgGwIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.4.1.1 integer32 read-only
The gateway number for which the information is related.
                     ipCurCfgGwAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.4.1.2 ipaddress read-only
The IP address of the default gateway.
                     ipCurCfgGwInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.4.1.3 integer read-only
The interval between ping attempts.
                     ipCurCfgGwRetry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.4.1.4 integer read-only
The number of failed attempts to declare the default gateway DOWN.
                     ipCurCfgGwState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.4.1.5 integer read-only
The state of the default gateway. Enumeration: 'disabled': 3, 'enabled': 2.
                     ipCurCfgGwArp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.4.1.6 integer read-only
The state of ARP only health checks. Enumeration: 'disabled': 3, 'enabled': 2.
             ipNewCfgGwTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5 no-access
The table of gateway configuration in the new configuration block.
                 ipNewCfgGwEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5.1 no-access
A row in the Ip default gateway table
                     ipNewCfgGwIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5.1.1 integer32 read-only
The gateway number for which the information is related.
                     ipNewCfgGwAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5.1.2 ipaddress read-only
The IP address of the default gateway.
                     ipNewCfgGwInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5.1.3 integer read-only
The interval in seconds between ping attempts.
                     ipNewCfgGwRetry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5.1.4 integer read-only
The number of failed attempts to declare the default gateway DOWN.
                     ipNewCfgGwState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5.1.5 integer read-only
The state of the default gateway. Enumeration: 'disabled': 3, 'enabled': 2.
                     ipNewCfgGwDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5.1.6 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                     ipNewCfgGwArp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.2.5.1.7 integer read-only
The state of the ARP only health checks. Enumeration: 'disabled': 3, 'enabled': 2.
         ipStaticRouteCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3
             ipStaticRouteTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.1 integer32 read-only
The maximum number of rows in the Static Route table.
             ipCurCfgStaticRouteTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.2 no-access
The table of static routes in the current configuration block.
                 ipCurCfgStaticRouteEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.2.1 no-access
A row in the static IP route table
                     ipCurCfgStaticRouteIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.2.1.1 integer32 read-only
The index of the static routing table.
                     ipCurCfgStaticRouteDestIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.2.1.2 ipaddress read-only
The destination IP address of this route.
                     ipCurCfgStaticRouteMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.2.1.3 ipaddress read-only
The destination IP address of this route.
                     ipCurCfgStaticRouteGateway 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.2.1.4 ipaddress read-only
The destination IP address of this route.
                     ipCurCfgStaticRouteInterface 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.2.1.5 integer32 read-only
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
             ipNewCfgStaticRouteTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.3 no-access
The table of static routes in the new configuration block.
                 ipNewCfgStaticRouteEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.3.1 no-access
A row in the static IP route table
                     ipNewCfgStaticRouteIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.3.1.1 integer32 read-only
The index of the static routing table.
                     ipNewCfgStaticRouteDestIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.3.1.2 ipaddress read-only
The destination IP address of this route.
                     ipNewCfgStaticRouteMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.3.1.3 ipaddress read-only
The subnet mask of this route.
                     ipNewCfgStaticRouteGateway 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.3.1.4 ipaddress read-only
The IP address of the gateway for this route.
                     ipNewCfgStaticRouteAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.3.1.5 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                     ipNewCfgStaticRouteInterface 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.3.1.6 integer32 read-only
The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
             ipStaticRouteClearAllByDestIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.4 ipaddress read-write
Clears all static routes with the specified destination IP address.
             ipStaticRouteClearAllByGatewayIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.5 ipaddress read-write
Clears all static routes with the specified gateway IP address.
             ipStaticRouteClearAllByInterface 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.6 integer read-write
Clears all routes on the specified inteface number.
             ipStaticRouteClearAll 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.3.7 integer read-write
When set to clear(2),clears all static routes. Otherwhise nothing is done. Enumeration: 'clear': 2, 'ok': 1.
         ipForwardCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.4
             ipFwdGeneralCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.4.1
                 ipFwdCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.4.1.1 integer read-only
IP forwarding global state. Enumeration: 'on': 2, 'off': 3.
                 ipFwdNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.4.1.2 integer read-write
IP forwarding global state. Enumeration: 'on': 2, 'off': 3.
                 ipFwdCurCfgDirectedBcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.4.1.3 integer read-only
Enable or disable forwarding directed broadcasts. Enumeration: 'disabled': 3, 'enabled': 2.
                 ipFwdNewCfgDirectedBcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.4.1.4 integer read-write
Enable or disable forwarding directed broadcasts. Enumeration: 'disabled': 3, 'enabled': 2.
         vrrpCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6
             vrrpGeneral 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1
                 vrrpCurCfgGenState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1.1 integer read-only
Enable or disable VRRP operation globally. Enumeration: 'disabled': 2, 'enabled': 1.
                 vrrpNewCfgGenState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1.2 integer read-write
Enable or disable VRRP operation globally. Enumeration: 'disabled': 2, 'enabled': 1.
                 vrrpCurCfgGenTckVirtRtrInc 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1.3 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
                 vrrpNewCfgGenTckVirtRtrInc 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1.4 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
                 vrrpCurCfgGenTckIpIntfInc 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1.5 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
                 vrrpNewCfgGenTckIpIntfInc 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1.6 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
                 vrrpCurCfgGenTckVlanPortInc 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1.7 integer read-only
The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
                 vrrpNewCfgGenTckVlanPortInc 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.1.8 integer read-write
The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
             vrrpVirtRtrTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.2 integer32 read-only
The maximum number of entries in VRRP virtual router table.
             vrrpCurCfgVirtRtrTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3 no-access
The table of VRRP virtual routers configuration in current_config.
                 vrrpCurCfgVirtRtrTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1 no-access
Information about a VRRP virtual router.
                     vrrpCurCfgVirtRtrIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.1 integer32 read-only
The VRRP virtual router table index.
                     vrrpCurCfgVirtRtrID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.2 integer read-only
The VRRP virtual router identifier.
                     vrrpCurCfgVirtRtrAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.3 ipaddress read-only
The VRRP virtual router IP address.
                     vrrpCurCfgVirtRtrIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.4 integer32 read-only
The IfIndex that the VRRP virtual router is representing.
                     vrrpCurCfgVirtRtrInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.5 integer read-only
The time interval between VRRP advertisements in seconds.
                     vrrpCurCfgVirtRtrPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.6 integer read-only
The priority value to be used by the specified VRRP virtual routers.
                     vrrpCurCfgVirtRtrPreempt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.7 integer read-only
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpCurCfgVirtRtrState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.8 integer read-only
Enable or disable the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpCurCfgVirtRtrTckVirtRtr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.10 integer read-only
Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpCurCfgVirtRtrTckIpIntf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.11 integer read-only
Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpCurCfgVirtRtrTckVlanPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.12 integer read-only
Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc. Enumeration: 'disabled': 2, 'enabled': 1.
             vrrpNewCfgVirtRtrTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4 no-access
The table of VRRP virtual routers configuration in current_config.
                 vrrpNewCfgVirtRtrTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1 no-access
Information about a VRRP virtual router.
                     vrrpNewCfgVirtRtrIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.1 integer32 read-only
The VRRP virtual router table index.
                     vrrpNewCfgVirtRtrID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.2 integer read-write
The VRRP virtual router identifier.
                     vrrpNewCfgVirtRtrAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.3 ipaddress read-only
The VRRP virtual router IP address.
                     vrrpNewCfgVirtRtrIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.4 integer32 read-only
The IfIndex that the VRRP virtual router is representing.
                     vrrpNewCfgVirtRtrInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.5 integer read-only
The time interval between VRRP advertisements in seconds.
                     vrrpNewCfgVirtRtrPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.6 integer read-only
The priority value to be used by the specified VRRP virtual router.
                     vrrpNewCfgVirtRtrPreempt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.7 integer read-only
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpNewCfgVirtRtrState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.8 integer read-only
Enable or disable the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpNewCfgVirtRtrDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.9 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                     vrrpNewCfgVirtRtrTckVirtRtr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.11 integer read-only
Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpNewCfgVirtRtrTckIpIntf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.12 integer read-only
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpNewCfgVirtRtrTckVlanPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.4.1.13 integer read-only
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc. Enumeration: 'disabled': 2, 'enabled': 1.
             vrrpIfTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.5 integer32 read-only
The maximum number of entries in VRRP interface table.
             vrrpCurCfgIfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.6 no-access
The table of VRRP interface configuration in current_config.
                 vrrpCurCfgIfTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.6.1 no-access
Information about a VRRP interface.
                     vrrpCurCfgIfIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.6.1.1 integer32 read-only
The VRRP interface index. This is eqivalent to IfIndex.
                     vrrpCurCfgIfAuthType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.6.1.2 integer read-only
Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication. Enumeration: 'simple-text-password': 2, 'none': 1.
                     vrrpCurCfgIfPasswd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.6.1.3 displaystring read-only
The password for authentication.
             vrrpNewCfgIfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.7 no-access
The table of VRRP interface configuration in current_config.
                 vrrpNewCfgIfTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.7.1 no-access
Information about a VRRP interface.
                     vrrpNewCfgIfIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.7.1.1 integer32 read-only
The VRRP interface index. This is eqivalent to IfIndex.
                     vrrpNewCfgIfAuthType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.7.1.2 integer read-only
Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication. Enumeration: 'simple-text-password': 2, 'none': 1.
                     vrrpNewCfgIfPasswd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.7.1.3 displaystring read-only
The password for authentication.
                     vrrpNewCfgIfDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.7.1.4 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
             vrrpVirtRtrGrpTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.8 integer32 read-only
The maximum number of entries in VRRP Group table.
             vrrpCurCfgVirtRtrGrpTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9 no-access
The table of VRRP virtual router group in current_config.
                 vrrpCurCfgVirtRtrGrpTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1 no-access
Information about a VRRP failover virtual router.
                     vrrpCurCfgVirtRtrGrpIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.1 integer32 read-only
The VRRP virtual router table index.
                     vrrpCurCfgVirtRtrGrpID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.2 integer read-only
The VRRP virtual router identifier.
                     vrrpCurCfgVirtRtrGrpIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.3 integer32 read-only
The IfIndex that the VRRP virtual router is representing.
                     vrrpCurCfgVirtRtrGrpInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.4 integer read-only
The time interval between VRRP advertisements in seconds.
                     vrrpCurCfgVirtRtrGrpPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.5 integer read-only
The priority value to be used by the specified VRRP virtual routers.
                     vrrpCurCfgVirtRtrGrpPreempt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.6 integer read-only
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpCurCfgVirtRtrGrpState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.7 integer read-only
Enable or disable the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpCurCfgVirtRtrGrpTckIpIntf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.10 integer read-only
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpCurCfgVirtRtrGrpTckVlanPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.9.1.11 integer read-only
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc. Enumeration: 'disabled': 2, 'enabled': 1.
             vrrpNewCfgVirtRtrGrpTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10 no-access
The table of VRRP virtual router group configuration in new_config.
                   vrrpNewCfgVirtRtrGrpTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1 no-access
Information about a VRRP failover virtual router.
                       vrrpNewCfgVirtRtrGrpIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.1 integer32 read-only
The VRRP virtual router table index.
                       vrrpNewCfgVirtRtrGrpID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.2 integer read-only
The VRRP virtual router identifier.
                       vrrpNewCfgVirtRtrGrpIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.3 integer32 read-only
The IfIndex that the VRRP virtual router is representing.
                       vrrpNewCfgVirtRtrGrpInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.4 integer read-only
The time interval between VRRP advertisements in seconds.
                       vrrpNewCfgVirtRtrGrpPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.5 integer read-only
The priority value to be used by the specified VRRP virtual router.
                       vrrpNewCfgVirtRtrGrpPreempt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.6 integer read-only
This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption Enumeration: 'disabled': 2, 'enabled': 1.
                       vrrpNewCfgVirtRtrGrpState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.7 integer read-only
Enable or disable the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                       vrrpNewCfgVirtRtrGrpDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.8 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                       vrrpNewCfgVirtRtrGrpTckIpIntf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.11 integer read-only
Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc. Enumeration: 'disabled': 2, 'enabled': 1.
                       vrrpNewCfgVirtRtrGrpTckVlanPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.10.1.12 integer read-only
Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc. Enumeration: 'disabled': 2, 'enabled': 1.
         arpCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7
             arpCurCfgReARPPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.1 integer read-only
Re-ARP Period in seconds.
             arpNewCfgReARPPeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.2 integer read-write
Re-ARP Period in seconds.
             ipStaticArpTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.3 integer read-only
The maximum number of rows in the Static ARP table.
             ipCurCfgStaticArpTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.4 no-access
The table of static ARPs in the current configuration block.
                 ipCurCfgStaticArpEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.4.1 no-access
A row in the static ARP table
                     ipCurCfgStaticArpIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.4.1.1 integer32 read-only
The index of the static ARP table.
                     ipCurCfgStaticArpIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.4.1.2 ipaddress read-only
The IP address for the ARP entry.
                     ipCurCfgStaticArpMAC 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.4.1.3 displaystring read-only
The MAC address for the ARP entry.
                     ipCurCfgStaticArpVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.4.1.4 integer read-only
The VLAN for the ARP entry.
                     ipCurCfgStaticArpPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.4.1.5 integer32 read-only
The port for the ARP entry.
             ipNewCfgStaticArpTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.5 no-access
The table of static ARPs in the new configuration block.
                 ipNewCfgStaticArpEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.5.1 no-access
A row in the static ARP table
                     ipNewCfgStaticArpIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.5.1.1 integer32 read-only
The index of the static ARP table.
                     ipNewCfgStaticArpIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.5.1.2 ipaddress read-only
The IP address for the ARP entry.
                     ipNewCfgStaticArpMAC 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.5.1.3 displaystring read-only
The MAC address for the ARP entry.
                     ipNewCfgStaticArpVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.5.1.4 integer read-only
The VLAN for the ARP entry.
                     ipNewCfgStaticArpPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.5.1.5 integer32 read-only
The port for the ARP entry.
                     ipNewCfgStaticArpAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.7.5.1.6 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
         ipBootpCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.8
             ipCurCfgBootpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.8.1 ipaddress read-only
The IP address of BOOTP server.
             ipNewCfgBootpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.8.2 ipaddress read-write
The IP address of BOOTP server.
             ipCurCfgBootpAddr2 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.8.3 ipaddress read-only
The IP address of second BOOTP server.
             ipNewCfgBootpAddr2 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.8.4 ipaddress read-write
The IP address of second BOOTP server.
             ipCurCfgBootpState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.8.5 integer read-only
The state of BOOTP relay. Enumeration: 'disabled': 3, 'enabled': 2.
             ipNewCfgBootpState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.8.6 integer read-write
The state of BOOTP relay. Enumeration: 'disabled': 3, 'enabled': 2.
         dnsCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.9
             dnsCurCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.9.1 ipaddress read-only
The DNS primary IP address in the current_configuration block.
             dnsNewCfgPrimaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.9.2 ipaddress read-write
The DNS primary IP address in the new_configuration block.
             dnsCurCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.9.3 ipaddress read-only
The DNS primary IP address in the current_configuration block.
             dnsNewCfgSecondaryIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.9.4 ipaddress read-write
The DNS primary IP address in the new_configuration block.
             dnsCurCfgDomainName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.9.5 displaystring read-only
The DNS doamin name in the current_configuration block.
             dnsNewCfgDomainName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.9.6 displaystring read-write
The DNS doamin name in the new_configuration block.
         ipNwfCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10
               ipNwfTableMax 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.1 integer32 read-only
The maximum number of rows in the IP network filter table.
               ipCurCfgNwfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.2 no-access
The table of IP network filter configuration in the current_config.
                   ipCurCfgNwfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.2.1 no-access
Information about an IP network filter.
                       ipCurCfgNwfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.2.1.1 integer32 read-only
The netowrk filter number for which the NWF is related.
                       ipCurCfgNwfAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.2.1.2 ipaddress read-only
The IP address of the network filter.
                       ipCurCfgNwfMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.2.1.3 ipaddress read-only
The subnet mask of the network filter.
                       ipCurCfgNwfState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.2.1.4 integer read-only
Enable or disable the network filter. Enumeration: 'disabled': 2, 'enabled': 1.
               ipNewCfgNwfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.3 no-access
The table of IP network filter configuration in the current_config.
                   ipNewCfgNwfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.3.1 no-access
Information about an IP network filter.
                       ipNewCfgNwfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.3.1.1 integer32 read-only
The netowrk filter number for which the NWF is related.
                       ipNewCfgNwfAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.3.1.2 ipaddress read-only
The IP address of the network filter.
                       ipNewCfgNwfMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.3.1.3 ipaddress read-only
The subnet mask of the network filter.
                       ipNewCfgNwfState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.3.1.4 integer read-only
Enable or disable the network filter. Enumeration: 'disabled': 2, 'enabled': 1.
                       ipNewCfgNwfDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.10.3.1.5 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
         ipRmapCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11
               ipRmapTableMax 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.1 integer32 read-only
The maximum number of rows in the IP route map table.
               ipCurCfgRmapTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.2 no-access
The table of IP route map configuration in the current_config.
                   ipCurCfgRmapEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.2.1 no-access
Information about an IP route map.
                       ipCurCfgRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.2.1.1 integer32 read-only
The route map number for which the RMAP is related.
                       ipCurCfgRmapMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.2.1.3 unsigned32 read-only
The metric of the route map. 4294967295 means none
                       ipCurCfgRmapPrec 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.2.1.4 integer read-only
The precedence of the route map.
                       ipCurCfgRmapState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.2.1.6 integer read-only
Enable or disable the route map. Enumeration: 'disabled': 2, 'enabled': 1.
                       ipCurCfgRmapMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.2.1.8 integer read-only
The OSPF metric-type of the matched route. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
               ipNewCfgRmapTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.3 no-access
The table of IP route map configuration in the current_config.
                   ipNewCfgRmapEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.3.1 no-access
Information about an IP route map.
                       ipNewCfgRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.3.1.1 integer32 read-only
The route map number for which the RMAP is related.
                       ipNewCfgRmapMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.3.1.3 unsigned32 read-only
The metric of the route map. 16777215 means none
                       ipNewCfgRmapPrec 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.3.1.4 integer read-only
The precedence of the route map.
                       ipNewCfgRmapState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.3.1.6 integer read-only
Enable or disable the route map. Enumeration: 'disabled': 2, 'enabled': 1.
                       ipNewCfgRmapMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.3.1.8 integer read-only
The OSPF metric-type of the matched route. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                       ipNewCfgRmapDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.3.1.9 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
               ipAlistTableMax 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.4 integer32 read-only
The maximum number of rows in the IP route map table.
               ipCurCfgAlistTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.5 no-access
The table of IP route map access list configuration in the current_config.
                   ipCurCfgAlistEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.5.1 no-access
Information about an IP route map.
                       ipCurCfgAlistRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.5.1.1 integer32 read-only
The route map number for which the RMAP is related.
                       ipCurCfgAlistIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.5.1.2 integer32 read-only
The access list number for which the access list is related.
                       ipCurCfgAlistNwf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.5.1.3 integer read-only
The network filter number of the route map access list. 0 means none
                       ipCurCfgAlistMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.5.1.4 unsigned32 read-only
The metric of the route map access list. 4294967295 means none
                       ipCurCfgAlistAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.5.1.5 integer read-only
Action of the route map access list. Enumeration: 'deny': 2, 'permit': 1.
                       ipCurCfgAlistState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.5.1.6 integer read-only
Enable or disable the route map access list. Enumeration: 'disabled': 2, 'enabled': 1.
               ipNewCfgAlistTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6 no-access
The table of IP route map access list configuration in the current_config.
                   ipNewCfgAlistEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6.1 no-access
Information about an IP route map.
                       ipNewCfgAlistRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6.1.1 integer32 read-only
The route map number for which the RMAP is related.
                       ipNewCfgAlistIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6.1.2 integer32 read-only
The access list number for which the access list is related.
                       ipNewCfgAlistNwf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6.1.3 integer read-only
The network filter number of the route map access list. 0 means none
                       ipNewCfgAlistMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6.1.4 unsigned32 read-only
The metric of the route map access list. 16777215 means none
                       ipNewCfgAlistAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6.1.5 integer read-only
Action of the route map access list. Enumeration: 'deny': 2, 'permit': 1.
                       ipNewCfgAlistState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6.1.6 integer read-only
Enable or disable the route map access list. Enumeration: 'disabled': 2, 'enabled': 1.
                       ipNewCfgAlistDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.11.6.1.7 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
         ospfCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13
               ospfGeneral 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1
                   ospfCurCfgDefaultRouteMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.1 integer read-only
Specify the metric to be assigned.
                   ospfNewCfgDefaultRouteMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.2 integer read-write
Specify the metric to be assigned.
                   ospfCurCfgDefaultRouteMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.3 integer read-only
Specify the AS External metric type to be assigned. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                   ospfNewCfgDefaultRouteMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.4 integer read-write
Specify the AS External metric type to be assigned. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                   ospfIntfTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.5 integer32 read-only
The maximum number of rows in the OSPF Interface table.
                   ospfAreaTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.6 integer32 read-only
The maximum number of rows in the OSPF Area table.
                   ospfRangeTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.7 integer32 read-only
The maximum number of rows in the OSPF Range table.
                   ospfVirtIntfTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.8 integer32 read-only
The maximum number of rows in the OSPF Virtual Interface table.
                   ospfHostTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.9 integer32 read-only
The maximum number of rows in the OSPF Host table.
                   ospfCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.10 integer read-only
OSPF global state. Enumeration: 'on': 1, 'off': 2.
                   ospfNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.11 integer read-write
Globally turn OSPF on or off. Enumeration: 'on': 1, 'off': 2.
                   ospfCurCfgLSDB 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.12 integer32 read-only
The LSDB limit for external LSA.
                   ospfNewCfgLSDB 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.1.13 integer32 read-write
Set the LSDB limit for external LSA.
               ospfCurCfgAreaTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2 no-access
The table of OSPF Area configuration in the current_config.
                   ospfCurCfgAreaEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2.1 no-access
Information about a OSPF area.
                       ospfCurCfgAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2.1.1 integer32 read-only
The OSPF area number for which the OSPF area table is related.
                       ospfCurCfgAreaId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2.1.2 ipaddress read-only
The IP Address of the OSPF area.
                       ospfCurCfgAreaSpfInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2.1.3 integer read-only
The SPF interval for the OSPF area.
                       ospfCurCfgAreaAuthType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2.1.4 integer read-only
Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication. Enumeration: 'none': 1, 'password': 2, 'md5': 3.
                       ospfCurCfgAreaType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2.1.5 integer read-only
Type of Area. transit(0) stub(1) nssa(2) Enumeration: 'stub': 1, 'transit': 0, 'nssa': 2.
                       ospfCurCfgAreaMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2.1.6 integer read-only
Metric (1-65535)
                       ospfCurCfgAreaStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.2.1.7 integer read-only
Status disabled(0) enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
               ospfNewCfgAreaTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3 no-access
The table of OSPF Area configuration in the new_config.
                   ospfNewCfgAreaEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1 no-access
Information about a OSPF area.
                       ospfNewCfgAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1.1 integer32 read-only
The OSPF area number for which the OSPF area table is related.
                       ospfNewCfgAreaId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1.2 ipaddress read-only
The IP Address of the OSPF area.
                       ospfNewCfgAreaSpfInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1.3 integer read-write
The SPF interval for the OSPF area.
                       ospfNewCfgAreaAuthType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1.4 integer read-write
Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication. Enumeration: 'none': 1, 'password': 2, 'md5': 3.
                       ospfNewCfgAreaType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1.5 integer read-write
Type of Area. transit(0) stub(1) nssa(2) Enumeration: 'stub': 1, 'transit': 0, 'nssa': 2.
                       ospfNewCfgAreaMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1.6 integer read-write
Metric (1-65535)
                       ospfNewCfgAreaStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1.7 integer read-write
Status disabled(0) enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
                       ospfNewCfgAreaDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.3.1.8 integer read-write
Delete the area no(0), yes(1) Enumeration: 'yes': 1, 'no': 0.
               ospfRouteRedistribution 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4
                   ospfRedistributeStatic 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1
                       ospfCurCfgStaticMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1.1 integer read-only
The metric to be assigned to static routes. A value of 0 indicates none.
                       ospfNewCfgStaticMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1.2 integer read-write
The metric to be assigned to static routes. A value of 0 indicates none.
                       ospfCurCfgStaticMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1.3 integer read-only
The AS External metric type for static routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                       ospfNewCfgStaticMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1.4 integer read-write
The AS External metric type for static routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                       ospfCurCfgStaticOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1.5 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ospfNewCfgStaticOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1.6 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ospfNewCfgStaticAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1.7 integer32 read-write
The route map to be add into out-rmap list. When read, 0 is returned.
                       ospfNewCfgStaticRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.1.8 integer32 read-write
The route map to be removed from out-rmap list. When read, 0 is returned.
                   ospfRedistributeFixed 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4
                       ospfCurCfgFixedMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4.1 integer read-only
The export metric for fixed routes. A value of 0 indicates none
                       ospfNewCfgFixedMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4.2 integer read-write
The export metric for fixed routes. A value of 0 indicates none
                       ospfCurCfgFixedMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4.3 integer read-only
The AS External metric type for fixed routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                       ospfNewCfgFixedMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4.4 integer read-write
The AS External metric type for fixed routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                       ospfCurCfgFixedOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4.5 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ospfNewCfgFixedOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4.6 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ospfNewCfgFixedAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4.7 integer32 read-write
The route map to be add into out-rmap list. When read, 0 is returned.
                       ospfNewCfgFixedRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.4.8 integer32 read-write
The route map to be removed from out-rmap list. When read, 0 is returned.
                   ospfRedistributeRip 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5
                       ospfCurCfgRipMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5.1 integer read-only
The export metric for RIP routes. A value of 0 indicates none
                       ospfNewCfgRipMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5.2 integer read-write
The export metric for RIP routes. A value of 0 indicates none
                       ospfCurCfgRipMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5.3 integer read-only
The AS External metric type for RIP routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                       ospfNewCfgRipMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5.4 integer read-write
The AS External metric type for RIP routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                       ospfCurCfgRipOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5.5 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ospfNewCfgRipOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5.6 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ospfNewCfgRipAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5.7 integer32 read-write
The route map to be add into out-rmap list. When read, 0 is returned.
                       ospfNewCfgRipRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.4.5.8 integer32 read-write
The route map to be removed from out-rmap list. When read, 0 is returned.
               ospfCurCfgMdkeyTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.5 no-access
The table of OSPF MD5 keys in the current_config.
                   ospfCurCfgMdkeyEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.5.1 no-access
Information about an OSPF MD keys table.
                       ospfCurCfgMdkeyIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.5.1.1 integer32 read-only
The OSPF MD5 Key number for which the OSPF MdKey table is related.
                       ospfCurCfgMdkeyKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.5.1.2 displaystring read-only
The character string representing the MD5 Key.
               ospfNewCfgMdkeyTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.6 no-access
The table of OSPF MD5 keys in the new_config.
                   ospfNewCfgMdkeyEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.6.1 no-access
Information about an OSPF MD keys table.
                       ospfNewCfgMdkeyIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.6.1.1 integer32 read-only
The OSPF MD5 Key number for which the OSPF MdKey table is related.
                       ospfNewCfgMdkeyKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.6.1.2 displaystring read-only
The character string representing the MD5 Key.
                       ospfNewCfgMdkeyDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.6.1.3 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
               ospfCurCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7 no-access
The table of OSPF Interface configuration in the current_config.
                   ospfCurCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1 no-access
Information about an OSPF Interface.
                       ospfCurCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.1 integer32 read-only
The OSPF Interface number for which the OSPF Interface table is related.
                       ospfCurCfgIntfId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.2 ipaddress read-only
The IP Address of the OSPF interface.
                       ospfCurCfgIntfArea 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.3 integer read-only
The index of the area that the interface belongs
                       ospfCurCfgIntfMdkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.4 integer read-only
The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
                       ospfCurCfgIntfCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.5 integer read-only
Interface cost
                       ospfCurCfgIntfPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.6 integer read-only
Interface router priority
                       ospfCurCfgIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.7 integer read-only
Hello interval
                       ospfCurCfgIntfDead 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.8 integer read-only
Dead interval
                       ospfCurCfgIntfTrans 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.9 integer read-only
Transit delay
                       ospfCurCfgIntfRetra 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.10 integer read-only
Retransmit interval
                       ospfCurCfgIntfAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.11 displaystring read-only
Authentication Key
                       ospfCurCfgIntfStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.7.1.12 integer read-only
Status of the interface disabled(0), enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
               ospfNewCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8 no-access
The table of OSPF Interface configuration in the new_config.
                   ospfNewCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1 no-access
Information about an OSPF Interface.
                       ospfNewCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.1 integer32 read-only
The OSPF Interface number for which the OSPF Interface table is related.
                       ospfNewCfgIntfId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.2 ipaddress read-only
The IP Address of the OSPF interface.
                       ospfNewCfgIntfArea 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.3 integer read-only
The index of the area that the interface belongs (0..2)
                       ospfNewCfgIntfMdkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.4 integer read-only
The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
                       ospfNewCfgIntfCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.5 integer read-only
Interface cost(1..65535)
                       ospfNewCfgIntfPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.6 integer read-only
Interface router priority(0..255)
                       ospfNewCfgIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.7 integer read-only
Hello interval(1..65535)
                       ospfNewCfgIntfDead 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.8 integer read-only
Dead interval(1..65535)
                       ospfNewCfgIntfTrans 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.9 integer read-only
Transit delay(1..3600)
                       ospfNewCfgIntfRetra 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.10 integer read-only
Retransmit interval(1..3600)
                       ospfNewCfgIntfAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.11 displaystring read-only
Authentication Key
                       ospfNewCfgIntfStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.12 integer read-only
Status of the interface disabled(0), enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
                       ospfNewCfgIntfDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.8.1.13 integer read-write
Delete the interface other(0), delete(1) Enumeration: 'other': 0, 'delete': 1.
               ospfCurCfgVirtIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9 no-access
The table of OSPF Virtual Interface configuration in the current_config.
                   ospfCurCfgVirtIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1 no-access
Information about an OSPF virtual Interface.
                       ospfCurCfgVirtIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.1 integer32 read-only
The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
                       ospfCurCfgVirtIntfAreaId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.2 integer read-only
The index of the OSPF area to which this virtual interface belongs.
                       ospfCurCfgVirtIntfNbr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.3 ipaddress read-only
The IP Address of the OSPF neighbor for this virtual interface.
                       ospfCurCfgVirtIntfMdkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.4 integer read-only
The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
                       ospfCurCfgVirtIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.5 integer read-only
Hello interval
                       ospfCurCfgVirtIntfDead 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.6 integer read-only
Dead interval
                       ospfCurCfgVirtIntfTrans 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.7 integer read-only
Transit delay
                       ospfCurCfgVirtIntfRetra 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.8 integer read-only
Retransmit interval
                       ospfCurCfgVirtIntfAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.9 displaystring read-only
Authentication Key
                       ospfCurCfgVirtIntfStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.9.1.10 integer read-only
Status disabled(0), enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
               ospfNewCfgVirtIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10 no-access
The table of OSPF Virtual Interface configuration in the new_config.
                     ospfNewCfgVirtIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1 no-access
Information about an OSPF virtual Interface.
                         ospfNewCfgVirtIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.1 integer32 read-only
The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
                         ospfNewCfgVirtIntfAreaId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.2 integer read-only
The index of the OSPF area to which this virtual interface belongs.
                         ospfNewCfgVirtIntfNbr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.3 ipaddress read-only
The IP Address of the OSPF neighbor for this virtual interface.
                         ospfNewCfgVirtIntfMdkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.4 integer read-only
The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
                         ospfNewCfgVirtIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.5 integer read-only
Hello interval(1..65535)
                         ospfNewCfgVirtIntfDead 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.6 integer read-only
Dead interval(1..65535)
                         ospfNewCfgVirtIntfTrans 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.7 integer read-only
Transit dela(1..3600)y
                         ospfNewCfgVirtIntfRetra 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.8 integer read-only
Retransmit interval(1..3600)
                         ospfNewCfgVirtIntfAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.9 displaystring read-only
Authentication Key SIZE(0..8)
                         ospfNewCfgVirtIntfStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.10 integer read-only
Status disabled(0), enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
                         ospfNewCfgVirtIntfDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.10.1.11 integer read-write
Delete other(0), delete(1) Enumeration: 'other': 0, 'delete': 1.
               ospfMdkeyTableMaxSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.11 integer32 read-only
The maximum number of rows in the OSPF Mdkey table.
               ospfCurCfgHostTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.12 no-access
The table of OSPF Host configuration.
                     ospfCurCfgHostEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.12.1 no-access
Information about a OSPF host.
                         ospfCurCfgHostIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.12.1.1 integer32 read-only
The OSPF host number for which the OSPF host table is related.
                         ospfCurCfgHostIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.12.1.2 ipaddress read-only
The IP Address of the OSPF host.
                         ospfCurCfgHostAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.12.1.3 integer32 read-only
The area index.
                         ospfCurCfgHostCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.12.1.4 integer read-only
The cost of the OSPF host.
                         ospfCurCfgHostState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.12.1.5 integer read-only
Enable or disable an OSPF Host Enumeration: 'disabled': 3, 'enabled': 2.
               ospfNewCfgHostTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.13 no-access
The table of OSPF Host configuration.
                     ospfNewCfgHostEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.13.1 no-access
Information about a OSPF host.
                         ospfNewCfgHostIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.13.1.1 integer32 read-only
The OSPF host number for which the OSPF host table is related.
                         ospfNewCfgHostIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.13.1.2 ipaddress read-only
The IP Address of the OSPF host.
                         ospfNewCfgHostAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.13.1.3 integer32 read-only
The OSPF area index.
                         ospfNewCfgHostCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.13.1.4 integer read-only
The cost of the OSPF host.
                         ospfNewCfgHostState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.13.1.5 integer read-only
Enable or disable an OSPF Host Enumeration: 'disabled': 3, 'enabled': 2.
                         ospfNewCfgHostDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.13.1.6 integer read-write
Delete the OSPF host: no(0), yes(1) Enumeration: 'yes': 1, 'no': 0.
               ospfCurCfgRangeTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.14 no-access
The table of OSPF summary range in the current configuration.
                     ospfCurCfgRangeEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.14.1 no-access
Information about an OSPF summary range.
                         ospfCurCfgRangeIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.14.1.1 integer32 read-only
The range number for which the OSPF summary range table is related.
                         ospfCurCfgRangeAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.14.1.2 ipaddress read-only
The IP Address of the range.
                         ospfCurCfgRangeMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.14.1.3 ipaddress read-only
The mask of the range.
                         ospfCurCfgRangeAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.14.1.4 integer32 read-only
The area index.
                         ospfCurCfgRangeHideState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.14.1.5 integer read-only
The state of the hide range. Enumeration: 'disabled': 2, 'enabled': 1.
                         ospfCurCfgRangeState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.14.1.6 integer read-only
The state of the range. Enumeration: 'disabled': 2, 'enabled': 1.
               ospfNewCfgRangeTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15 no-access
The table of OSPF summary range in the new configuration.
                     ospfNewCfgRangeEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15.1 no-access
Information about an OSPF summary range.
                         ospfNewCfgRangeIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15.1.1 integer32 read-only
The range number for which the OSPF summary range table is related.
                         ospfNewCfgRangeAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15.1.2 ipaddress read-only
The IP Address of the range.
                         ospfNewCfgRangeMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15.1.3 ipaddress read-only
The mask of the range.
                         ospfNewCfgRangeAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15.1.4 integer32 read-only
The area index.
                         ospfNewCfgRangeHideState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15.1.5 integer read-only
The state of the hide range. Enumeration: 'disabled': 2, 'enabled': 1.
                         ospfNewCfgRangeState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15.1.6 integer read-only
The state of the range. Enumeration: 'disabled': 2, 'enabled': 1.
                         ospfNewCfgRangeDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.13.15.1.7 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
         ipGeneralCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.14
               ipCurCfgRouterID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.14.1 ipaddress read-only
The router ID of the switch.
               ipNewCfgRouterID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.14.2 ipaddress read-write
The router ID of the switch.
         igmpCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15
               igmpCurCfgOnOff 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.1 integer read-only
Globally turn IGMP On/Off. Enumeration: 'on': 1, 'off': 2.
               igmpNewCfgOnOff 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.2 integer read-write
Globally turn IGMP On/Off. Enumeration: 'on': 1, 'off': 2.
               igmpSnoopCfgGen 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3
                   igmpSnoopCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1
                       igmpSnoopCurCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.1 integer32 read-only
Set IGMP Report timeout.
                       igmpSnoopNewCfgTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.2 integer32 read-write
Set IGMP Report timeout.
                       igmpSnoopCurCfgMrto 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.3 integer32 read-only
The value of multicast router timeout in the current config.
                       igmpSnoopNewCfgMrto 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.4 integer32 read-write
The value of multicast router timeout in the new config.
                       igmpSnoopNewCfgVlanFastlvAdd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.12 integer32 read-write
The VLAN to be added to fastleave vlan list. When read, 0 is returned.
                       igmpSnoopNewCfgVlanFastlvRem 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.13 integer32 read-write
The VLAN to be removed from fastleave vlan list. When read, 0 is returned.
                       igmpSnoopCurCfgVlanFastlvBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.14 octet string read-only
The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
                       igmpSnoopNewCfgVlanFastlvBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.15 octet string read-only
The fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has fastlv enabled 0 - The represented vlan does not have fastlv enabled.
                       igmpSnoopCurCfgRobust 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.16 integer32 read-only
The value of expected packet loss on subnet in the current config.
                       igmpSnoopNewCfgRobust 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.17 integer32 read-write
The value of expected packet loss on subnet in the new config.
                       igmpSnoopNewCfgVlanAdd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.18 integer32 read-write
The VLAN to be added to snooping vlan list. When read, 0 is returned.
                       igmpSnoopNewCfgVlanRem 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.19 integer32 read-write
The VLAN to be removed from snooping vlan list. When read, 0 is returned.
                       igmpSnoopNewCfgVlanClear 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.20 integer read-write
Removing ALL Snooping Vlans. Enumeration: 'clear': 1, 'ok': 2.
                       igmpSnoopCurCfgVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.21 octet string read-only
The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
                       igmpSnoopNewCfgVlanBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.22 octet string read-only
The snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Vlan 9 || || || ||___ Vlan 8 || |____ Vlan 7 || . . . ||_________ Vlan 2 |__________ Vlan 1 where x : 1 - The represented vlan has snoop enabled 0 - The represented vlan does not have snooping enabled.
                       igmpSnoopCurCfgQInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.23 integer32 read-only
IGMP Query Interval of current config.
                       igmpSnoopNewCfgQInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.24 integer32 read-write
IGMP Query Interval of new config.
                       igmpSnoopCurCfgSrcIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.25 ipaddress read-only
The source ip for GSQ proxy in current config.
                       igmpSnoopNewCfgSrcIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.26 ipaddress read-write
The source ip for GSQ proxy in new config.
                       igmpSnoopCurCfgAggrEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.27 integer read-only
Enable/Disable of IGMP Report aggregation. Enumeration: 'enable': 1, 'disable': 2.
                       igmpSnoopNewCfgAggrEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.28 integer read-write
Enable/Disable of IGMP Report aggregation. Enumeration: 'enable': 1, 'disable': 2.
                       igmpSnoopCurCfgFlood 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.29 integer read-only
Enable/Disable of flood unregistered IPMC Enumeration: 'enable': 1, 'disable': 2.
                       igmpSnoopNewCfgFlood 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.1.30 integer read-write
Enable/Disable of flood unregistered IPMC Enumeration: 'enable': 1, 'disable': 2.
                   igmpV3SnoopCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2
                       igmpV3SnoopCurCfgSources 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2.1 integer32 read-only
Number of sources to snoop in a group record in current config.
                       igmpV3SnoopNewCfgSources 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2.2 integer32 read-write
Number of sources to snoop in a group record in new config.
                       igmpV3SnoopCurCfgEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2.3 integer read-only
The current status of IGMP V3 Snooping. Enumeration: 'disabled': 2, 'enabled': 1.
                       igmpV3SnoopNewCfgEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2.4 integer read-write
Set Enable/Disable of IGMP V3 Snooping. Enumeration: 'enable': 1, 'disable': 2.
                       igmpV3SnoopCurCfgExcludeEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2.5 integer read-only
The current status of IGMP V3 EXCLUDE filter-mode Snooping. Enumeration: 'disabled': 2, 'enabled': 1.
                       igmpV3SnoopNewCfgExcludeEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2.6 integer read-write
Set Enable/Disable of IGMP V3 EXCLUDE filter-mode Snooping. Enumeration: 'enable': 1, 'disable': 2.
                       igmpV3SnoopCurCfgV1V2EnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2.7 integer read-only
The current status of IGMP V1/V2 Report Snooping. Enumeration: 'disabled': 2, 'enabled': 1.
                       igmpV3SnoopNewCfgV1V2EnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.3.2.8 integer read-write
Set Enable/Disable of IGMP V1/V2 Report Snooping. Enumeration: 'enable': 1, 'disable': 2.
               igmpStaticMrtrCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4
                   igmpStaticMrtrCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.1 no-access
The IGMP Static Multicast Router table in the current configuration block.
                       igmpStaticMrtrCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.1.1 no-access
A row in the Static Multicast Router table.
                           igmpStaticMrtrCurCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.1.1.1 integer32 read-only
The IGMP Multicast Router table port index.
                           igmpStaticMrtrCurCfgPortId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.1.1.2 integer32 read-only
The IGMP Multicast Router port in the current configuration block.
                           igmpStaticMrtrCurCfgVlanId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.1.1.3 integer32 read-only
The IGMP Multicast Router port in the current configuration block.
                           igmpStaticMrtrCurCfgVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.1.1.4 integer read-only
The IGMP version of the IGMP Static Multicast Router. Enumeration: 'version1': 1, 'version2': 2.
                   igmpStaticMrtrNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.2 no-access
The IGMP Static Multicast Router table in the new configuration block.
                       igmpStaticMrtrNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.2.1 no-access
A row in the Static Multicast Router table.
                           igmpStaticMrtrNewCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.2.1.1 integer32 read-only
The IGMP Multicast Router table port index.
                           igmpStaticMrtrNewCfgPortId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.2.1.2 integer32 read-only
The IGMP Multicast Router port in the new configuration block.
                           igmpStaticMrtrNewCfgVlanId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.2.1.3 integer32 read-only
The IGMP Multicast Router port in the new configuration block.
                           igmpStaticMrtrNewCfgVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.2.1.4 integer read-only
The IGMP version of the IGMP Static Multicast Router. Enumeration: 'version1': 1, 'version2': 2, 'version3': 3.
                           igmpStaticMrtrNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.4.2.1.5 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
               igmpFilterCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5
                   igmpFltCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.1 no-access
The IGMP filtering table in the current configuration block.
                       igmpFltCurCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.1.1 no-access
A row in the filtering table.
                           igmpFltCurCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.1.1.1 integer32 read-only
The IGMP filter table index.
                           igmpFltCurCfgMcastIp1 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.1.1.2 ipaddress read-only
Range1 Multicast IP address to be filtered.
                           igmpFltCurCfgMcastIp2 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.1.1.3 ipaddress read-only
Range2 Multicast IP address to be filtered.
                           igmpFltCurCfgAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.1.1.4 integer read-only
The action for the IGMP filtering rule. Enumeration: 'deny': 2, 'allow': 1.
                           igmpFltCurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.1.1.5 integer read-only
The state of this IGMP filtering rule. Enumeration: 'disabled': 2, 'enabled': 1.
                   igmpFltNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.2 no-access
The IGMP filtering table in the current configuration block.
                       igmpFltNewCfgTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.2.1 no-access
A row in the filtering table.
                           igmpFltNewCfgIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.2.1.1 integer32 read-only
The IGMP filter table index.
                           igmpFltNewCfgMcastIp1 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.2.1.2 ipaddress read-only
Range1 Multicast source IP address to be filtered.
                           igmpFltNewCfgMcastIp2 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.2.1.3 ipaddress read-only
Range2 Multicast source IP address to be filtered.
                           igmpFltNewCfgAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.2.1.4 integer read-only
The action for the IGMP filtering rule. Enumeration: 'deny': 2, 'allow': 1.
                           igmpFltNewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.2.1.5 integer read-only
The state of this IGMP filtering rule. Enumeration: 'disabled': 2, 'enabled': 1.
                           igmpFltNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.2.1.6 integer read-only
When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row. Enumeration: 'other': 1, 'delete': 2.
                   igmpFltCurCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.3 no-access
The IGMP filtering port table in the current configuration block.
                       igmpFltCurCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.3.1 no-access
A row in the IGMP filtering port table.
                           igmpFltCurCfgPortIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.3.1.1 integer32 read-only
The port index.
                           igmpFltCurCfgPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.3.1.2 integer read-only
Enable or disable IGMP filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                           igmpFltCurCfgPortFiltBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.3.1.3 octet string read-only
The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to igmpFltCurCfgTable) where x : 1 - The represented IGMP filter rule applied to the port 0 - The represented IGMP filter rule not applied to the port
                   igmpFltNewCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.4 no-access
The IGMP filtering port table in the new configuration block.
                       igmpFltNewCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.4.1 no-access
A row in the IGMP filtering port table.
                           igmpFltNewCfgPortIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.4.1.1 integer32 read-only
The port index.
                           igmpFltNewCfgPortState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.4.1.2 integer read-only
Enable or disable IGMP filtering. Enumeration: 'disabled': 2, 'enabled': 1.
                           igmpFltNewCfgPortFiltBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.4.1.3 octet string read-only
The IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ filter 9 || || || ||___ filter 8 || |____ filter 7 || . . . ||_________ filter 2 |__________ filter 1 (as index to fltNewCfgTable) where x : 1 - The represented filter rule applied to the port 0 - The represented filter rule not applied to the port
                           igmpFltNewCfgPortAddFiltRule 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.4.1.4 integer32 read-only
This is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be added to the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always.
                           igmpFltNewCfgPortRemFiltRule 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.4.1.5 integer32 read-only
This is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to be removed from the port. The range of the valid index is between 1 and igmpFltCurCfgTableMaxSize. When read, the value '0' is returned always.
                   igmpFltCurCfgEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.5 integer read-only
Enable/Disable of IGMP Filtering. Enumeration: 'enable': 1, 'disable': 2.
                   igmpFltNewCfgEnaDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.15.5.6 integer read-write
Enable/Disable of IGMP Filtering. Enumeration: 'enable': 1, 'disable': 2.
         rip2Cfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18
               ripCurCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1 no-access
The table of RIP on IP interface configuration in the current_config.
                   ripCurCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1 no-access
Information about RIP on IP interface.
                       ripCurCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.1 integer read-only
The interface number for which the RIP information is related.
                       ripCurCfgIntfVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.2 integer read-only
RIP version. Enumeration: 'ripVersion2': 2, 'ripVersion1': 1, 'ripVersionBoth': 3.
                       ripCurCfgIntfSupply 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.3 integer read-only
Enable or disable supplying route updates. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripCurCfgIntfListen 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.4 integer read-only
Enable or disable listening to route updates. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripCurCfgIntfDefault 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.5 integer read-only
Specifies what RIP does with default routes. Enumeration: 'both': 1, 'none': 4, 'supply': 3, 'listen': 2.
                       ripCurCfgIntfTrigUpdate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.6 integer read-only
Enable or disable tirggered updates. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripCurCfgIntfMcastUpdate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.7 integer read-only
Enable or disable multicast updates. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripCurCfgIntfPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.8 integer read-only
RIP poison reverse. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripCurCfgIntfState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.9 integer read-only
Enable or disable RIP protocol. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripCurCfgIntfMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.10 integer read-only
RIP route metric for this interface.
                       ripCurCfgIntfAuth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.11 integer read-only
Enable or disable RIP update authorization with a simple plain text password. Enumeration: 'none': 1, 'password': 2.
                       ripCurCfgIntfKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.12 displaystring read-only
RIP update authentication password.
                       ripCurCfgIntfSplitHorizon 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.1.1.13 integer read-only
RIP split horizon. Enumeration: 'disabled': 3, 'enabled': 2.
               ripNewCfgIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2 no-access
The table of RIP on IP interface configuration in the new_config.
                   ripNewCfgIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1 no-access
Information about RIP on IP interface.
                       ripNewCfgIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.1 integer read-only
The interface number for which the RIP information is related.
                       ripNewCfgIntfVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.2 integer read-write
RIP version. Enumeration: 'ripVersion2': 2, 'ripVersion1': 1, 'ripVersionBoth': 3.
                       ripNewCfgIntfSupply 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.3 integer read-write
Enable or disable supplying route updates. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripNewCfgIntfListen 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.4 integer read-write
Enable or disable listening to route updates. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripNewCfgIntfDefault 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.5 integer read-only
Specifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none. Enumeration: 'both': 1, 'none': 4, 'supply': 3, 'listen': 2.
                       ripNewCfgIntfTrigUpdate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.6 integer read-write
Enable or disable tirggered updates. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripNewCfgIntfMcastUpdate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.7 integer read-write
Enable or disable multicast updates. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripNewCfgIntfPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.8 integer read-write
RIP poison reverse. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripNewCfgIntfState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.9 integer read-only
Enable or disable RIP protocol. Enumeration: 'disabled': 2, 'enabled': 1.
                       ripNewCfgIntfMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.10 integer read-write
RIP route metric for this interface.
                       ripNewCfgIntfAuth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.11 integer read-write
Enable or disable RIP update authorization with a simple plain text password. Enumeration: 'none': 1, 'password': 2.
                       ripNewCfgIntfKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.12 displaystring read-only
RIP update authentication password.
                       ripNewCfgIntfSplitHorizon 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.2.1.13 integer read-write
RIP split horizon. Enumeration: 'disabled': 3, 'enabled': 2.
               ripGeneral 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.3
                   rip2CurCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.3.1 integer read-only
RIP global state. Enumeration: 'on': 1, 'off': 2.
                   rip2NewCfgState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.3.2 integer read-write
Globally turn RIP on or off. Enumeration: 'on': 1, 'off': 2.
                   rip2CurCfgUpdatePeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.3.3 integer read-only
Update Period in seconds.
                   rip2NewCfgUpdatePeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.3.4 integer read-write
Update Period in seconds.
               ripRouteRedistribution 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4
                   ripRedistributeStatic 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1
                       ripCurCfgStaticMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.1 integer read-only
The metric to be assigned to static routes. A value of 0 indicates none.
                       ripNewCfgStaticMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.2 integer read-write
The metric to be assigned to static routes. A value of 0 indicates none.
                       ripCurCfgStaticOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.5 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ripNewCfgStaticOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.6 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ripNewCfgStaticAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.7 integer32 read-write
The route map to be add into out-rmap list. When read, 0 is returned.
                       ripNewCfgStaticRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.1.8 integer32 read-write
The route map to be removed from out-rmap list. When read, 0 is returned.
                   ripRedistributeFixed 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.4
                       ripCurCfgFixedMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.4.1 integer read-only
The export metric for fixed routes. A value of 0 indicates none
                       ripNewCfgFixedMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.4.2 integer read-write
The export metric for fixed routes. A value of 0 indicates none
                       ripCurCfgFixedOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.4.5 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ripNewCfgFixedOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.4.6 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ripNewCfgFixedAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.4.7 integer32 read-write
The route map to be add into out-rmap list. When read, 0 is returned.
                       ripNewCfgFixedRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.4.8 integer32 read-write
The route map to be removed from out-rmap list. When read, 0 is returned.
                   ripRedistributeOspf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.5
                       ripCurCfgOspfMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.5.1 integer read-only
The export metric for RIP routes. A value of 0 indicates none
                       ripNewCfgOspfMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.5.2 integer read-write
The export metric for RIP routes. A value of 0 indicates none
                       ripCurCfgOspfOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.5.5 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ripNewCfgOspfOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.5.6 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ripNewCfgOspfAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.5.7 integer32 read-write
The route map to be add into out-rmap list. When read, 0 is returned.
                       ripNewCfgOspfRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.5.8 integer32 read-write
The route map to be removed from out-rmap list. When read, 0 is returned.
                   ripRedistributeEospf 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6
                       ripCurCfgEospfMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.1 integer read-only
The export metric for RIP routes. A value of 0 indicates none
                       ripNewCfgEospfMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.2 integer read-write
The export metric for RIP routes. A value of 0 indicates none
                       ripCurCfgEospfOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.5 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ripNewCfgEospfOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.6 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                       ripNewCfgEospfAddOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.7 integer32 read-write
The route map to be add into out-rmap list. When read, 0 is returned.
                       ripNewCfgEospfRemoveOutRmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.18.4.6.8 integer32 read-write
The route map to be removed from out-rmap list. When read, 0 is returned.
     layer3Stats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2
         arpStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.2
             arpStatEntries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.2.1 gauge32 read-only
The current number of ARP entries.
             arpStatHighWater 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.2.2 gauge32 read-only
The highest number of ARP entries.
             arpStatMaxEntries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.2.3 gauge32 read-only
The maximum number of ARP entries.
         routeStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.3
             routeStatEntries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.3.1 gauge32 read-only
The current number of IP routes.
             routeStatHighWater 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.3.2 gauge32 read-only
The highest number of IP routes.
             routeStatMaxEntries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.3.3 gauge32 read-only
The maximum number of IP routes.
         vrrpStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4
             vrrpStatInAdvers 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.1 counter32 read-only
The number of good VRRP advertisements which are received.
             vrrpStatOutAdvers 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.2 counter32 read-only
The number of good VRRP advertisements which are transmitted.
             vrrpStatOutBadAdvers 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.3 counter32 read-only
The number of bad VRRP advertisements which are received.
             vrrpStatBadVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.4 counter32 read-only
The number of bad VRRP version adv which are received.
             vrrpStatBadAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.5 counter32 read-only
The number of bad VRRP addres adv which are received.
             vrrpStatBadPassword 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.6 counter32 read-only
The number of bad VRRP advertisements which are received.
             vrrpStatBadVrid 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.7 counter32 read-only
The number of bad VRRP version ID adv which are received.
             vrrpStatBadData 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.8 counter32 read-only
The number of bad VRRP advertisements which are received.
             vrrpStatBadInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.4.9 counter32 read-only
The number of bad VRRP iutervals which are received.
         ospfStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5
             ospfGeneralStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1
                 ospfCumRxTxStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1
                     ospfCumRxPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.1 counter32 read-only
The sum total of all OSPF packets received on all OSPF areas and interfaces.
                     ospfCumTxPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.2 counter32 read-only
The sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
                     ospfCumRxHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.3 counter32 read-only
The sum total of all Hello packets received on all OSPF areas and interfaces.
                     ospfCumTxHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.4 counter32 read-only
The sum total of all Hello packets transmitted on all OSPF areas and interfaces.
                     ospfCumRxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.5 counter32 read-only
The sum total of all Database Description packets received on all OSPF areas and interfaces.
                     ospfCumTxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.6 counter32 read-only
The sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
                     ospfCumRxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.7 counter32 read-only
The sum total of all Link State Request packets received on all OSPF areas and interfaces.
                     ospfCumTxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.8 counter32 read-only
The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
                     ospfCumRxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.9 counter32 read-only
The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
                     ospfCumTxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.10 counter32 read-only
The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
                     ospfCumRxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.11 counter32 read-only
The sum total of all Link State Update packets received on all OSPF areas and interfaces.
                     ospfCumTxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.1.12 counter32 read-only
The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
                 ospfCumNbrChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2
                     ospfCumNbrhello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.1 counter32 read-only
The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
                     ospfCumNbrStart 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.2 counter32 read-only
The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces.
                     ospfCumNbrAdjointOk 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.3 counter32 read-only
The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces.
                     ospfCumNbrNegotiationDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.4 counter32 read-only
The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces.
                     ospfCumNbrExchangeDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.5 counter32 read-only
The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces.
                     ospfCumNbrBadRequests 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.6 counter32 read-only
The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas.
                     ospfCumNbrBadSequence 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.7 counter32 read-only
The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces.
                     ospfCumNbrLoadingDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.8 counter32 read-only
The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces.
                     ospfCumNbrN1way 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.9 counter32 read-only
The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
                     ospfCumNbrRstAd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.10 counter32 read-only
The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
                     ospfCumNbrDown 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.11 counter32 read-only
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces.
                     ospfCumNbrN2way 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.2.12 counter32 read-only
The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas.
                 ospfCumIntfChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.3
                     ospfCumIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.3.1 counter32 read-only
The sum total number of Hello packets sent on all interfaces and areas
                     ospfCumIntfDown 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.3.2 counter32 read-only
The sum total number of interfaces down in all OSPF areas.
                     ospfCumIntfLoop 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.3.3 counter32 read-only
The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces.
                     ospfCumIntfUnloop 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.3.4 counter32 read-only
The sum total number of interfaces, connected to the attatched network in all OSPF areas.
                     ospfCumIntfWaitTimer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.3.5 counter32 read-only
The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces.
                     ospfCumIntfBackup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.3.6 counter32 read-only
The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
                     ospfCumIntfNbrChange 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.3.7 counter32 read-only
The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
                 ospfTimersKickOffStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.4
                     ospfTmrsKckOffHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.4.1 counter32 read-only
The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces.
                     ospfTmrsKckOffRetransmit 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.4.2 counter32 read-only
The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
                     ospfTmrsKckOffLsaLock 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.4.3 counter32 read-only
The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces.
                     ospfTmrsKckOffLsaAck 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.4.4 counter32 read-only
The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces.
                     ospfTmrsKckOffDbage 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.4.5 counter32 read-only
The total number of times the Dbage has been fired.
                     ospfTmrsKckOffSummary 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.4.6 counter32 read-only
The total number of times the Summary timer has been fired.
                     ospfTmrsKckOffAseExport 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.1.4.7 counter32 read-only
The total number of times the ASE Export timer has been fired.
             ospfArea 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2
                 ospfAreaRxTxStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1 no-access
The table of OSPF Area Rx/Tx Statistics.
                     ospfAreaRxTxStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1 no-access
Rx Tx packet Statistics about a OSPF area.
                         ospfAreaRxTxIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.1 integer32 read-only
The index of the ospf Area for which these statistics apply.
                         ospfAreaRxPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.2 counter32 read-only
The total number of OSPF packets received in this OSPF area.
                         ospfAreaTxPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.3 counter32 read-only
The total number of OSPF packets transmitted in this OSPF area.
                         ospfAreaRxHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.4 counter32 read-only
The total number of Hello packets received in this OSPF area.
                         ospfAreaTxHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.5 counter32 read-only
The total number of Hello packets transmitted in this OSPF area.
                         ospfAreaRxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.6 counter32 read-only
The total number of Database Description packets transmitted for this OSPF area.
                         ospfAreaTxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.7 counter32 read-only
The total number of Database Description packets transmitted for this OSPF area.
                         ospfAreaRxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.8 counter32 read-only
The total number of Link State Request packets received for this OSPF area.
                         ospfAreaTxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.9 counter32 read-only
The total number of Link State Request packets transmitted for this OSPF area.
                         ospfAreaRxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.10 counter32 read-only
The total number of Link State Acknowledgement packets received for this OSPF area.
                         ospfAreaTxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.11 counter32 read-only
The total number of Link State Acknowledgement packets transmitted for this OSPF area.
                         ospfAreaRxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.12 counter32 read-only
The total number of Link State Update packets received for this OSPF area.
                         ospfAreaTxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.1.1.13 counter32 read-only
The total number of Link State Update packets transmitted for this OSPF area.
                 ospfAreaNbrChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2 no-access
The table of OSPF Area Neighbour Statistics.
                     ospfAreaNbrChangeStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1 no-access
Area Neighbour Change Statistics about a OSPF area.
                         ospfAreaNbrIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.1 integer32 read-only
The index of the ospf Area for which these statistics apply.
                         ospfAreaNbrhello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.2 counter32 read-only
The total number of Hello packets received from neighbours in this OSPF area.
                         ospfAreaNbrStart 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.3 counter32 read-only
The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area.
                         ospfAreaNbrAdjointOk 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.4 counter32 read-only
The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
                         ospfAreaNbrNegotiationDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.5 counter32 read-only
The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area.
                         ospfAreaNbrExchangeDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.6 counter32 read-only
The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area.
                         ospfAreaNbrBadRequests 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.7 counter32 read-only
The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
                         ospfAreaNbrBadSequence 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.8 counter32 read-only
The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area.
                         ospfAreaNbrLoadingDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.9 counter32 read-only
The total number of link state updates received for all out-of-date portions of the database in this OSPF area.
                         ospfAreaNbrN1way 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.10 counter32 read-only
The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
                         ospfAreaNbrRstAd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.11 counter32 read-only
The total number of times the Neighbour adjacency has been reset across this OPSF area.
                         ospfAreaNbrDown 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.12 counter32 read-only
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
                         ospfAreaNbrN2way 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.2.1.13 counter32 read-only
The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area.
                 ospfAreaChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3 no-access
The table of OSPF Area Change Statistics.
                     ospfAreaChangeStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1 no-access
Area Change Statistics about a OSPF area.
                         ospfAreaIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1.1 integer32 read-only
The index of the OSPF Area for which these statistics apply.
                         ospfAreaIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1.2 counter32 read-only
The total number of Hello packets sent on this OSPF area.
                         ospfAreaIntfDown 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1.3 counter32 read-only
The total number of interfaces down in this OSPF area.
                         ospfAreaIntfLoop 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1.4 counter32 read-only
The total number of interfaces no longer connected to the attatched network in this OSPF area.
                         ospfAreaIntfUnloop 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1.5 counter32 read-only
The total number of interfaces connected to the attatched network in this OSPF area..
                         ospfAreaIntfWaitTimer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1.6 counter32 read-only
The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area.
                         ospfAreaIntfBackup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1.7 counter32 read-only
The total number of Backup Designated Routers on the attatched network for this OSPF area.
                         ospfAreaIntfNbrChange 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.3.1.8 counter32 read-only
The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
                 ospfAreaErrorStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4 no-access
The table of OSPF Area Error Statistics.
                     ospfAreaErrorStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1 no-access
Error Statistics for an OSPF area.
                         ospfAreaErrIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1.1 integer32 read-only
The index of the OSPF Area for which these statistics apply.
                         ospfAreaErrAuthFailure 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1.2 counter32 read-only
The total number of packets received with a wrong password in this area.
                         ospfAreaErrNetmaskMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1.3 counter32 read-only
The total number of packets received with a wrong netmask in this area.
                         ospfAreaErrHelloMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1.4 counter32 read-only
The total number of packets received with a different hello interval in this area.
                         ospfAreaErrDeadMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1.5 counter32 read-only
The total number of packets received with a different dead interval in this area.
                         ospfAreaErrOptionsMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1.6 counter32 read-only
The total number of packets received with a different options in this area.
                         ospfAreaErrUnknownNbr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1.7 counter32 read-only
The total number of packets received from an unknown neighbor in this area.
                         ospfAreaErrAreaMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.2.4.1.8 counter32 read-only
The total number of packets received with a wrong area.
             ospfInterface 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3
                 ospfIntfRxTxStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1 no-access
The table of OSPF Interface Rx/Tx packet Statistics.
                     ospfIntfRxTxStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1 no-access
OSPF interface Rx/Tx packet statistics.
                         ospfIntfRxTxIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.1 integer32 read-only
The OSPF interface for which these statistics apply.
                         ospfIntfRxPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.2 counter32 read-only
The total number of OSPF packets received for this OSPF interface.
                         ospfIntfTxPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.3 counter32 read-only
The total number of OSPF packets transmitted for this OSPF interface.
                         ospfIntfRxHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.4 counter32 read-only
The total number of Hello packets received for this OSPF interface.
                         ospfIntfTxHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.5 counter32 read-only
The total number of Hello packets transmitted for this OSPF interface.
                         ospfIntfRxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.6 counter32 read-only
The total number of Database Description packets received for this OSPF interface.
                         ospfIntfTxDatabase 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.7 counter32 read-only
The total number of Database Description packets transmitted for this OSPF interface.
                         ospfIntfRxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.8 counter32 read-only
The total number of Link State Request packets received for this OSPF interface.
                         ospfIntfTxlsReqs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.9 counter32 read-only
The total number of Link State Request packets transmitted for this OSPF interface.
                         ospfIntfRxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.10 counter32 read-only
The total number of Link State Acknowledgement packets received for this OSPF interface.
                         ospfIntfTxlsAcks 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.11 counter32 read-only
The total number of Link State Acknowledgement packets transmitted for this OSPF interface.
                         ospfIntfRxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.12 counter32 read-only
The total number of Link State Update packets received for this OSPF interface.
                         ospfIntfTxlsUpdates 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.1.1.13 counter32 read-only
The total number of Link State Update packets transmitted for this OSPF interface.
                 ospfIntfNbrChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2 no-access
The table of OSPF Interface Neighbour change Statistics.
                     ospfIntfNbrChangeStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1 no-access
OSPF interface Neighbour Change statistics.
                         ospfIntfNbrIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.1 integer32 read-only
The index of the OSPF Interface for which these statistics apply.
                         ospfIntfNbrhello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.2 counter32 read-only
The total number of Hello packets received from neighbours in this OSPF interface.
                         ospfIntfNbrStart 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.3 counter32 read-only
The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface.
                         ospfIntfNbrAdjointOk 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.4 counter32 read-only
The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
                         ospfIntfNbrNegotiationDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.5 counter32 read-only
The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface.
                         ospfIntfNbrExchangeDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.6 counter32 read-only
The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface.
                         ospfIntfNbrBadRequests 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.7 counter32 read-only
The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
                         ospfIntfNbrBadSequence 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.8 counter32 read-only
The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface.
                         ospfIntfNbrLoadingDone 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.9 counter32 read-only
The total number of link state updates received for all out-of-date portions of the database for this OSPF interface.
                         ospfIntfNbrN1way 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.10 counter32 read-only
The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
                         ospfIntfNbrRstAd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.11 counter32 read-only
The sum total number of times the Neighbour adjacency has been reset on this interface.
                         ospfIntfNbrDown 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.12 counter32 read-only
The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
                         ospfIntfNbrN2way 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.2.1.13 counter32 read-only
The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface.
                 ospfIntfChangeStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3 no-access
The table of OSPF Interface change Statistics.
                     ospfIntfChangeStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1 no-access
OSPF interface Change statistics.
                         ospfIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1.1 integer32 read-only
The index of the OSPF Interface for which these statistics apply.
                         ospfIntfHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1.2 counter32 read-only
The total number of Hello packets sent by this interface.
                         ospfIntfDown 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1.3 counter32 read-only
The total number of times the interface was down.
                         ospfIntfLoop 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1.4 counter32 read-only
The total number of times the interface was no longer connected to the attatched network.
                         ospfIntfUnloop 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1.5 counter32 read-only
The total number of times the interface, connected back to the attatched network.
                         ospfIntfWaitTimer 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1.6 counter32 read-only
The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface.
                         ospfIntfBackup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1.7 counter32 read-only
The total number of Backup Designated Routers on the attatched network for this OSPF interface.
                         ospfIntfNbrChange 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.3.1.8 counter32 read-only
The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
                 ospfIntfErrorStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4 no-access
The table of OSPF Interface Error Statistics.
                     ospfIntfErrorStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1 no-access
Error Statistics for an OSPF area.
                         ospfIntfErrIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1.1 integer32 read-only
The index of the OSPF Intf for which these statistics apply.
                         ospfIntfErrAuthFailure 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1.2 counter32 read-only
The total number of packets received with a wrong password in this area.
                         ospfIntfErrNetmaskMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1.3 counter32 read-only
The total number of packets received with a wrong netmask in this area.
                         ospfIntfErrHelloMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1.4 counter32 read-only
The total number of packets received with a different hello interval in this area.
                         ospfIntfErrDeadMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1.5 counter32 read-only
The total number of packets received with a different dead interval in this area.
                         ospfIntfErrOptionsMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1.6 counter32 read-only
The total number of packets received with a different options in this area.
                         ospfIntfErrUnknownNbr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1.7 counter32 read-only
The total number of packets received from an unknown neighbor in this area.
                         ospfIntfErrAreaMismatch 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.5.3.4.1.8 counter32 read-only
The total number of packets received with a wrong area.
         clearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6
             ipClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.1 integer read-write
Setting this to clear(1) results in clearing the IP statistics. Enumeration: 'clear': 1, 'ok': 2.
             vrrpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.2 integer read-write
Setting this to clear(2) results in clearing the VRRP statistics. Enumeration: 'clear': 2, 'ok': 1.
             ripClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.4 integer read-write
Setting this to clear(1) results in clearing the RIP statistics. Enumeration: 'clear': 1, 'ok': 2.
             ospfClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.5 integer read-write
Setting this to clear(1) results in clearing the OSPF statistics. Enumeration: 'clear': 1, 'ok': 2.
             tcpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.6 integer read-write
Setting this to clear(1) results in clearing the TCP statistics. Enumeration: 'clear': 1, 'ok': 2.
             udpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.7 integer read-write
Setting this to clear(1) results in clearing the UDP statistics. Enumeration: 'clear': 1, 'ok': 2.
             dnsClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.8 integer read-write
Setting this to clear(1) results in clearing the DNS statistics. Enumeration: 'clear': 1, 'ok': 2.
             arpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.9 integer read-write
Setting this to clear(1) results in clearing the ARP statistics. Enumeration: 'clear': 1, 'ok': 2.
             icmpClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.10 integer read-write
Setting this to clear(1) results in clearing the ICMP statistics. Enumeration: 'clear': 1, 'ok': 2.
             routeClearStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.6.11 integer read-write
Setting this to clear(1) results in clearing the Route statistics. Enumeration: 'clear': 1, 'ok': 2.
         igmpStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7
             igmpSnoopStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1 no-access
The table of OSPF Interface Error Statistics.
                 igmpSnoopStatsEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1 no-access
Statistics for IGMP Snooping.
                     igmpSnoopVlanIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.1 integer32 read-only
The index of the VLAN for which these statistics apply.
                     rxIgmpValidPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.2 counter32 read-only
The total number of valid IGMP packets received on this VLAN.
                     rxIgmpInvalidPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.3 counter32 read-only
The total number of invalid IGMP packets received on this VLAN.
                     rxIgmpGenQueries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.4 counter32 read-only
The total number of IGMP General Query packets received on this VLAN.
                     rxIgmpGrpSpecificQueries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.5 counter32 read-only
The total number of IGMP Group Specific Query packets received on this VLAN.
                     rxIgmpLeaves 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.6 counter32 read-only
The total number of IGMP Leave packets received on this VLAN.
                     rxIgmpReports 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.7 counter32 read-only
The total number of IGMP Report packets received on this VLAN.
                     txIgmpGrpSpecificQueries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.8 counter32 read-only
The total number of IGMP Group Specific Query packets transmitted on this VLAN.
                     txIgmpReports 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.9 counter32 read-only
The total number of IGMP Report packets transmitted on this VLAN.
                     txIgmpLeaves 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.10 counter32 read-only
The total number of IGMP Leave packets transmitted on this VLAN.
                     rxIgmpGroupSourceSpecificQueries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.11 counter32 read-only
The total number of IGMP Group Source Specific (GSSQ) Queries received on this VLAN.
                     rxIgmpV3CurrentStateRecords 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.12 counter32 read-only
The total number of IGMP Current State Records (CSRs) received on this VLAN.
                     rxIgmpV3SourceListChangeRecords 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.13 counter32 read-only
The total number of IGMP Source List Change Records (SLCRs) received on this VLAN.
                     rxIgmpV3FilterChangeRecords 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.1.1.14 counter32 read-only
The total number of IGMP Filter Mode Change Records (FMCRs) received on this VLAN.
             igmpClearAllStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.2 integer read-write
Setting this to clear(1) results in clearing the IGMP statistics. Enumeration: 'clear': 1, 'ok': 2.
             igmpStatsTotalIgmpGroups 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.3 counter32 read-only
The total number of IGMP groups.
             igmpStatsTotalIpmcGroups 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.7.4 counter32 read-only
The total number of IPMC groups.
         ipStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8
             ipStatsInReceives 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.1 counter32 read-only
ip InReceive
             ipStatsInHdrErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.2 counter32 read-only
ip InHdrError
             ipStatsInAddrErrors 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.3 counter32 read-only
ip InAddrErrors
             ipStatsInUnknownProtos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.4 counter32 read-only
ip InUnknownProtos
             ipStatsInDiscards 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.5 counter32 read-only
ip InDiscards
             ipStatsInDelivers 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.6 counter32 read-only
ip InDelivers
             ipStatsOutRequests 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.7 counter32 read-only
ip OutRequests
             ipStatsOutDiscards 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.8 counter32 read-only
ip OutDiscards
             ipStatsDefaultTTL 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.8.9 counter32 read-only
ip DefaultTTL
         rip2Stats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13
               ripStatInPackets 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.1 counter32 read-only
The total number of RIP packets recieved.
               ripStatOutPackets 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.2 counter32 read-only
The total number of RIP packets transmitted.
               ripStatInRequestPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.3 counter32 read-only
The total number of RIP requests recieved.
               ripStatInResponsePkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.4 counter32 read-only
The total number of RIP response recieved.
               ripStatOutRequestPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.5 counter32 read-only
The total number of RIP requests transmitted.
               ripStatOutResponsePkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.6 counter32 read-only
The total number of RIP responses transmitted.
               ripStatRouteTimeout 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.7 counter32 read-only
The total number of RIP route timeouts.
               ripStatInBadSizePkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.8 counter32 read-only
The total number of bad size RIP packets recieved.
               ripStatInBadVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.9 counter32 read-only
The total number of RIP bad versions recieved.
               ripStatInBadZeros 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.10 counter32 read-only
The total number of RIP bad zeros recieved.
               ripStatInBadSourcePort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.11 counter32 read-only
The total number of RIP bad source port recieved.
               ripStatInBadSourceIP 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.12 counter32 read-only
The total number of RIP bad source IP recieved.
               ripStatInSelfRcvPkts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.13.13 counter32 read-only
The total number of RIP packets from self received.
         dnsStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.14
               dnsStatInGoodDnsRequests 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.14.1 counter32 read-only
The total number of good DNS request packets received.
               dnsStatOutDnsRequests 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.14.2 counter32 read-only
The total number of DNS request packets
               dnsStatInBadDnsRequests 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.14.3 counter32 read-only
The total number of bad DNS request packets received
         geal3Stats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.15
               maxL3TableSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.15.1 integer32 read-only
Max L3 table size
               noL3EntriesUsed 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.15.2 integer32 read-only
Number of L3 entries used
               maxLpmTableSize 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.15.3 integer32 read-only
Max LPM table size
               noLpmEntriesUsed 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.15.4 integer32 read-only
Number of LPM entries used
               maxBlockInLpmTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.15.5 integer32 read-only
Max number of blocks in LPM table
               noBlocksUsedInLpmTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.2.15.6 integer32 read-only
Number of blocks used in LPM table
     layer3Info 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3
         ipRoutingInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1
             ipRouteInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1 no-access
The table of run-time IP routes.
                 ipRouteInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1 no-access
A row in the run-time IP route table
                     ipRouteInfoIndx 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1.1 integer32 read-only
The index of this route table.
                     ipRouteInfoDestIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1.2 ipaddress read-only
The destination IP address of this route.
                     ipRouteInfoMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1.3 ipaddress read-only
The destination IP mask of this route.
                     ipRouteInfoGateway 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1.4 ipaddress read-only
The next-hop router address for this route.
                     ipRouteInfoTag 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1.5 integer read-only
The tag-type for this route. Enumeration: 'bgp': 9, 'none': 11, 'addr': 3, 'multicast': 7, 'rip': 4, 'broadcast': 5, 'vip': 8, 'martian': 6, 'static': 2, 'fixed': 1, 'ospf': 10.
                     ipRouteInfoType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1.6 integer read-only
The type of the route. Enumeration: 'multicast': 6, 'direct': 2, 'broadcast': 4, 'martian': 5, 'indirect': 1, 'local': 3, 'other': 7.
                     ipRouteInfoInterface 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1.7 integer32 read-only
The interface number for which the destination address is applicable.
                     ipRouteInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.1.1.8 integer32 read-only
The metric of this route.
             routeTableClear 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.1.2 integer read-write
Setting this value to clear(2) clears the route table. Enumeration: 'clear': 2, 'ok': 1.
         arpInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2
             arpInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2.1 no-access
The table of ARP entries.
                 arpInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2.1.1 no-access
A row in the ARP table
                     arpInfoDestIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2.1.1.1 ipaddress read-only
The destination IP address of the ARP entry.
                     arpInfoMacAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2.1.1.2 physaddress read-only
The MAC address for the ARP entry.
                     arpInfoVLAN 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2.1.1.3 integer32 read-only
The VLAN identifier for the ARP entry.
                     arpInfoSrcPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2.1.1.4 integer32 read-only
The port number on which this entry's equivalence is effective.
                     arpInfoFlag 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2.1.1.6 integer read-only
The flag associated with this ARP entry. Enumeration: 'permanent': 3, 'clear': 1, 'unresolved': 2, 'indirect': 4.
             arpCacheClear 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.2.2 integer read-write
Setting this value to clear(2) clears the ARP cache. Enumeration: 'clear': 2, 'ok': 1.
         vrrpInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3
             vrrpInfoVirtRtrTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1 no-access
The table of VRRP virtual router run-time information.
                 vrrpInfoVirtRtrTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1 no-access
The run-time information about a VRRP virtual router.
                     vrrpInfoVirtRtrIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1.1 integer32 read-only
The VRRP virtual router index.
                     vrrpInfoVirtRtrConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1.2 integer read-only
The status of the VRRP virtual router. Enumeration: 'disabled': 2, 'enabled': 1.
                     vrrpInfoVirtRtrID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1.3 integer read-only
The VRRP virtual router identifier.
                     vrrpInfoVirtRtrAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1.4 ipaddress read-only
The VRRP virtual router IP address.
                     vrrpInfoVirtRtrIfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1.5 integer32 read-only
The IfIndex that the VRRP virtual router is representing.
                     vrrpInfoVirtRtrPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1.6 integer read-only
The priority value to be used by the specified VRRP virtual routers.
                     vrrpInfoVirtRtrState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1.7 integer read-only
The VRRP virtual router state. Enumeration: 'backup': 3, 'init': 1, 'master': 2.
                     vrrpInfoVirtRtrOwnership 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.3.1.1.8 integer read-only
The VRRP virtual router ownership status. Enumeration: 'owner': 1, 'renter': 2.
         ospfInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4
             ospfGeneralInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1
                 ospfVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.1 integer read-only
OSPF version. Enumeration: 'ospfVersion1': 1, 'ospfVersion2': 2.
                 ospfRouterID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.2 ipaddress read-only
The router ID of the switch.
                 ospfStartTime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.3 integer32 read-only
The time when ospf has been started.
                 ospfProcessUptime 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.4 counter32 read-only
The time since ospf has been started.
                 ospfLsTypesSupported 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.5 integer32 read-only
The Link State Types that are supported.
                 ospfAreaBorderRouter 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.6 integer read-only
Area Border Router Role. Enumeration: 'yes': 1, 'no': 2.
                 ospfAreaBoundaryRouter 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.7 integer read-only
Area Boundary Router Role. Enumeration: 'yes': 1, 'no': 2.
                 ospfExternalLsa 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.8 integer32 read-only
The number of external LSAs.
                 ospfIntfCountForRouter 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.9 integer32 read-only
The number of interfaces for this router.
                 ospfVlinkCountForRouter 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.10 integer32 read-only
The number of virtual links for this router.
                 ospfNewLsaReceived 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.11 integer32 read-only
The number of new LSAs reveived.
                 ospfTotalLsaOriginated 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.12 integer32 read-only
The number of LSAs originated.
                 ospfTotalNumberOfLsdbEntries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.13 integer32 read-only
Total number of entries in the Link State Database.
                 ospfTotalNeighbours 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.14 integer32 read-only
The total number of OSPF neighbours.
                 ospfNbrInInitState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.15 integer32 read-only
The number of neighbours in the initial state of exchange.
                 ospfNbrInExchState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.16 integer32 read-only
The number of neighbours in the exchange state.
                 ospfNbrInFullState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.17 integer32 read-only
The number of neighbours in the Full state of exchange.
                 ospfTotalAreas 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.18 integer32 read-only
The Total number of areas.
                 ospfTotalTransitAreas 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.19 integer32 read-only
The Total number of Transit areas.
                 ospfTotalNssaAreas 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.20 integer32 read-only
The Total number of NSSA areas.
                 ospfTotalStubAreas 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.1.21 integer32 read-only
The Total number of STUB areas.
             ospfAreaInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2 no-access
The table of OSPF Area information.
                 ospfAreaInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1 no-access
Information about a OSPF area.
                     ospfAreaInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.1 integer32 read-only
The OSPF area number for which the OSPF info table is related.
                     ospfAreaInfoId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.2 ipaddress read-only
The IP address of the OSPF area.
                     ospfAreaInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.3 integer read-only
Area Status: disabled(0), enabled(1). Enumeration: 'disabled': 0, 'enabled': 1.
                     ospfTotalNumberOfInterfaces 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.4 integer32 read-only
The total number of interfaces for this OSPF area.
                     ospfNumberOfInterfacesUp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.5 integer32 read-only
The number of interfaces UP in area.
                     ospfAreaInfoAuthType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.6 integer read-only
Type of authentication being used: none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication. Enumeration: 'none': 1, 'password': 2, 'md5': 3.
                     ospfAreaInfoSPF 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.7 integer32 read-only
The number of times SPF ran.
                     ospfNumberOfLsdbEntries 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.8 integer32 read-only
The number of Link State Database entries for this OSPF area.
                     ospfAreaInfoAreaBorderRouter 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.9 integer32 read-only
The Area Border Router count.
                     ospfAreaInfoASBoundaryRouter 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.10 integer32 read-only
The AS Boundary Router count.
                     ospfAreaInfoTotalNeighbours 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.11 integer32 read-only
The total number of OSPF neighbors.
                     ospfAreaInfoNeighborsINITstate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.12 integer32 read-only
Total neighbors in INIT state.
                     ospfAreaInfoNeighborsEXCHstate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.13 integer32 read-only
Total neighbors in EXCH state.
                     ospfAreaInfoNeighborsFULLstate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.14 integer32 read-only
Total neighbors in FULL state.
                     ospfAreaInfoLsTypesAccepted 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.2.1.15 displaystring read-only
LS types accepted by this area.
             ospfIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3 no-access
The table of OSPF Interface information.
                 ospfIntfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1 no-access
Information about a OSPF interface.
                     ospfIfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.1 integer32 read-only
The OSPF interface number for which the OSPF info table is related.
                     ospfIfInfoIpAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.2 ipaddress read-only
The IP address of the OSPF interface.
                     ospfIfInfoArea 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.3 integer read-only
The index of the area that the interface belongs.
                     ospfIfInfoAdminStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.4 integer read-only
Admin Status of the interface: down(0), up(1). Enumeration: 'down': 0, 'up': 1.
                     ospfIfInfoRouterID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.5 ipaddress read-only
The router ID of the switch.
                     ospfIfInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.6 integer read-only
The state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6). Enumeration: 'backupdr': 5, 'loopback': 1, 'drother': 6, 'down': 0, 'waiting': 2, 'dr': 4, 'ptop': 3.
                     ospfIfInfoPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.7 integer read-only
Interface router priority
                     ospfIfInfoDesignatedRouterID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.8 ipaddress read-only
The OSPF Designated Router ID for this OSPF interface.
                     ospfIfInfoDesignatedRouterIpAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.9 ipaddress read-only
The OSPF Designated Router IP Address for this OSPF interface.
                     ospfIfInfoBackupDesignatedRouterID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.10 ipaddress read-only
The OSPF Backup Designated Router ID for this OSPF interface.
                     ospfIfInfoBackupDesignatedRouterIpAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.11 ipaddress read-only
The OSPF Backup Designated Router Ip Address for this OSPF interface.
                     ospfIfInfoHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.12 integer read-only
The hello timer for this OSPF interface.
                     ospfIfInfoDead 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.13 integer read-only
The dead timer for this OSPF interface.
                     ospfIfInfoWait 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.14 integer32 read-only
The OSPF Wait interval for this OSPF interface.
                     ospfIfInfoRetransmit 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.15 integer read-only
The retransmit interval for this OSPF interface.
                     ospfIfInfoTransitDelay 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.16 integer read-only
The transit delay for this OSPF interface.
                     ospfIfInfoTotalNeighbours 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.17 integer32 read-only
The total number of neighbours for this OSPF interface.
                     ospfIfInfoEvents 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.18 integer32 read-only
The total number of events for this OSPF interface.
                     ospfIfInfoAuthType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.3.1.19 integer read-only
Type of authentication being used: none(1) - no authentication, password(2) - use password, md5(3) - use MD5 authentication. Enumeration: 'none': 1, 'password': 2, 'md5': 3.
             ospfVirtIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4 no-access
The table of OSPF virtual interfaces information.
                 ospfVirtIntfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1 no-access
Information about an OSPF virtual interface.
                     ospfVirtIntfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.1 integer32 read-only
The OSPF Virtual Interface number for which this table is related.
                     ospfVirtIntfInfoIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.2 ipaddress read-only
The IP Address of this virtual interface.
                     ospfVirtIntfInfoArea 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.3 integer read-only
The index of the OSPF area to which this virtual interface belongs.
                     ospfVirtIntfInfoRouterId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.4 ipaddress read-only
The Router ID.
                     ospfVirtIntfInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.5 integer read-only
State disabled(0), enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
                     ospfVirtIntfInfoCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.6 integer read-only
The cost of the virtual interface.
                     ospfVirtIntfInfoTrans 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.7 integer read-only
The transit delay for the virtual interface.
                     ospfVirtIntfInfoHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.8 integer read-only
Hello interval.
                     ospfVirtIntfInfoDead 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.9 integer read-only
Dead interval.
                     ospfVirtIntfInfoWait 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.10 integer read-only
Wait interval.
                     ospfVirtIntfInfoRetra 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.11 integer read-only
Retransmit interval.
                     ospfVirtIntfInfoAuth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.12 displaystring read-only
Authentication.
                     ospfVirtIntfInfoEvents 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.13 integer read-only
Events.
                     ospfVirtIntfInfoNbr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.14 ipaddress read-only
The IP Address of the OSPF neighbor for this virtual interface.
                     ospfVirtIntfInfoNbrState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.15 integer read-only
State down(0),attempt(1),init(2),2 way(3), exstart(4),exchange(5),loading(6),full(7) Enumeration: 'exstart': 4, 'loading': 6, 'attempt': 1, 'exchange': 5, 'down': 0, 'init': 2, 'full': 7, 'twoway': 3.
                     ospfVirtIntfInfoAreaId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.4.1.16 ipaddress read-only
Thea AreaId of the virtual interface.
             ospfIfNbrTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5 no-access
The table of OSPF Interface Neighbor information.
                 ospfIfNbrEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5.1 no-access
Information about a OSPF interface, neighbor pair.
                     ospfIfNbrIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5.1.1 integer32 read-only
The OSPF Interface number for which this Interface/Nbr table is related.
                     ospfIfNbrIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5.1.2 ipaddress read-only
The OSPF Neighbor ID .
                     ospfIfNbrPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5.1.3 integer32 read-only
The priority of the OSPF neighbor.
                     ospfIfNbrState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5.1.4 integer read-only
The state of the OSPF neighbor. Enumeration: 'exStart': 5, 'loading': 7, 'attempt': 2, 'exchange': 6, 'down': 1, 'init': 3, 'full': 8, 'twoway': 4.
                     ospfIfNbrDesignatedRtr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5.1.5 ipaddress read-only
The IP Address of the Designated Router for this OSPF Neighbor.
                     ospfIfNbrBackupDesignatedRtr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5.1.6 ipaddress read-only
The IP Address of the backup designated Router for this OSPF Neighbor.
                     ospfIfNbrIpAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.5.1.7 ipaddress read-only
The IP Address of the OSPF Neighbor.
             ospfSumRangesInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.6 no-access
The table of OSPF summary ranges information.
                 ospfSumRangesInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.6.1 no-access
Summary ranges information.
                     ospfSumRangesInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.6.1.1 integer32 read-only
The OSPF range index for which this table is related.
                     ospfSumRangesInfoArea 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.6.1.2 integer read-only
Area.
                     ospfSumRangesInfoNetwork 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.6.1.3 ipaddress read-only
Network.
                     ospfSumRangesInfoMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.6.1.4 ipaddress read-only
Mask.
                     ospfSumRangesInfoAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.6.1.5 integer read-only
Action propagate(0), hide(1) Enumeration: 'hide': 1, 'propagate': 0.
                     ospfSumRangesInfoListType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.6.1.6 integer read-only
Summary address list Non-NSSA(0), NSSA(1) Enumeration: 'non-nssa': 0, 'nssa': 1.
             ospfRoutesInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.7 no-access
The table of OSPF routes information.
                 ospfRoutesInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.7.1 no-access
OSPF routes information.
                     ospfRoutesInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.7.1.1 integer32 read-only
The OSPF route table entry index for which this table is related.
                     ospfRoutesInfoDestination 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.7.1.2 ipaddress read-only
Destination.
                     ospfRoutesInfoMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.7.1.3 ipaddress read-only
Mask.
                     ospfRoutesInfoVia 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.7.1.4 ipaddress read-only
Next hop.
                     ospfRoutesInfoType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.7.1.5 displaystring read-only
Route type. Codes: IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 * - best
             ospfLsdbInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8 no-access
The OSPF Process's Link State Database.
                 ospfLsdbInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1 no-access
A single Link State Advertisement.
                     ospfLsdbInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.1 integer32 read-only
The 32 bit index in the table.
                     ospfLsdbInfoAreaId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.2 ipaddress read-only
The 32 bit identifier of the Area from which the LSA was received.
                     ospfLsdbInfoType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.3 integer read-only
The type of the link state advertisement. Each link state type has a separate advertise- ment format. Enumeration: 'routerLink': 1, 'asSummaryLink': 4, 'asExternalLink': 5, 'nssaExternalLink': 7, 'networkLink': 2, 'multicastLink': 6, 'summaryLink': 3.
                     ospfLsdbInfoLsid 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.4 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                     ospfLsdbInfoRouterId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.5 ipaddress read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                     ospfLsdbInfoSequence 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.6 octet string read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal.
                     ospfLsdbInfoAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.7 integer32 read-only
This field is the age of the link state adver- tisement in seconds.
                     ospfLsdbInfoChecksum 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.8 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
                     ospfLsdbInfoAdvertisement 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.8.1.9 octet string read-only
The entire Link State Advertisement, including its header.
             ospfExtLsdbInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9 no-access
The OSPF Process's Links State Database.
                 ospfExtLsdbInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1 no-access
A single Link State Advertisement.
                     ospfExtLsdbInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1.1 integer32 read-only
The 32 bit index in the table.
                     ospfExtLsdbInfoType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1.2 integer read-only
The type of the link state advertisement. Each link state type has a separate advertise- ment format. Enumeration: 'asExternalLink': 5.
                     ospfExtLsdbInfoLsid 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                     ospfExtLsdbInfoRouterId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1.4 ipaddress read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                     ospfExtLsdbInfoSequence 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1.5 octet string read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement - displayed here in hexazecimal.
                     ospfExtLsdbInfoAge 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1.6 integer32 read-only
This field is the age of the link state adver- tisement in seconds.
                     ospfExtLsdbInfoChecksum 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1.7 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
                     ospfExtLsdbInfoAdvertisement 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.4.9.1.8 octet string read-only
The entire Link State Advertisement, including its header.
         igmpInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5
             igmpInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1 no-access
The table of IGMP group membership information.
                 igmpInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1 no-access
Information about an IGMP group member .
                     igmpInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.1 integer32 read-only
The igmp group number for which the IGMP info table is related.
                     igmpInfoGroupId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.2 ipaddress read-only
The IP address of the IGMP group.
                     igmpInfoVlanId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.3 integer32 read-only
The VLAN ID for this IGMP group.
                     igmpInfoVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.5 integer read-only
The Version of IGMP host. Enumeration: 'v1': 3, 'v2': 2, 'v3': 1.
                     igmpInfoPortNum 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.6 integer32 read-only
The Version of IGMP host.
                     igmpInfoExpires 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.7 displaystring read-only
The expiration time for this host.
                     igmpInfoMode 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.8 integer read-only
The IGMPv3 filter-mode for this host. Enumeration: 'exclude': 1, 'include': 2.
                     igmpInfoSourceIp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.9 ipaddress read-only
The source IP address of the IGMP group.
                     igmpInfoFwd 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.1.1.10 integer read-only
The IGMPv3 forwarding for this source/group IP for this host. Enumeration: 'yes': 1, 'no': 2.
             igmpMrtrInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2 no-access
The table of IGMP mrouters.
                 igmpMrtrInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1 no-access
Information about an IGMP mrouter.
                     igmpMrtrInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1.1 integer32 read-only
The mrouter number for which the IGMP mrouter info table is related.
                     igmpMrtrInfoVlanId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1.2 integer32 read-only
The VLAN ID on which this IGMP mrouter is attached.
                     igmpMrtrInfoPortId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1.3 integer32 read-only
The port on which this IGMP mrouter is attached.
                     igmpMrtrInfoVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1.4 integer32 read-only
The version of this IGMP mrouter.
                     igmpMrtrInfoExpires 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1.5 displaystring read-only
The expiration time for this mrouter.
                     igmpMrtrInfoMrt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1.6 integer32 read-only
The Maximum Query Response time of this IGMP mrouter.
                     igmpMrtrInfoQrv 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1.7 integer read-only
The Querier Robustness value of this IGMP mrouter.
                     igmpMrtrInfoQqic 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.5.2.1.8 integer read-only
The Querier query interval code of this IGMP mrouter.
         rip2Info 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7
             rip2GeneralInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.1
                 ripInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.1.1 integer read-only
RIP global state. Enumeration: 'on': 1, 'off': 2.
                 ripInfoUpdatePeriod 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.1.2 integer read-only
Update Period in seconds.
             rip2InfoIntfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2 no-access
The information table of RIP.
                 ripInfoIntfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1 no-access
Information about RIP on IP interface.
                     ripInfoIntfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.1 integer32 read-only
The interface number for which the RIP information is related.
                     ripInfoIntfVersion 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.2 integer read-only
RIP version. Enumeration: 'ripVersion2': 2, 'ripVersion1': 1, 'ripVersionBoth': 3.
                     ripInfoIntfAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.3 ipaddress read-only
The interface address.
                     ripInfoIntfState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.4 integer read-only
The status of RIP protocol. Enumeration: 'disabled': 2, 'enabled': 1.
                     ripInfoIntfListen 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.5 integer read-only
The status of listening to route updates. Enumeration: 'disabled': 2, 'enabled': 1.
                     ripInfoIntfTrigUpdate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.6 integer read-only
The status of triggered updates. Enumeration: 'disabled': 2, 'enabled': 1.
                     ripInfoIntfMcastUpdate 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.7 integer read-only
The status of multicast updates. Enumeration: 'disabled': 2, 'enabled': 1.
                     ripInfoIntfPoisonReverse 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.8 integer read-only
The status of RIP poison reverse. Enumeration: 'disabled': 2, 'enabled': 1.
                     ripInfoIntfSupply 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.9 integer read-only
The status of supplying route updates. Enumeration: 'disabled': 2, 'enabled': 1.
                     ripInfoIntfMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.10 integer read-only
RIP route metric for this interface.
                     ripInfoIntfAuth 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.11 integer read-only
The type of Authentication used on this interface. Enumeration: 'none': 1, 'password': 2.
                     ripInfoIntfKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.12 displaystring read-only
RIP update authentication password.
                     ripInfoIntfDefault 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.7.2.1.13 integer read-only
Specifies what RIP does with default routes. Enumeration: 'both': 1, 'none': 4, 'supply': 3, 'listen': 2.
         ipInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8
             ipInfoRouterID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.1 ipaddress read-only
Router ID information.
             ipIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.2 no-access
The table of IP interface information.
                 intfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.2.1 no-access
A row in IP interface information table.
                     intfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.2.1.1 integer32 read-only
The interface number for which the information is related.
                     intfInfoAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.2.1.2 displaystring read-only
The IP address of the interface.
                     intfInfoNetMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.2.1.3 displaystring read-only
The subnet mask of the interface.
                     intfInfoBcastAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.2.1.4 displaystring read-only
The broadcast address of the interface.
                     intfInfoVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.2.1.5 integer32 read-only
The VLAN number for this interface.
                     intfInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.2.1.6 integer read-only
The status of the interface. Enumeration: 'down': 2, 'disabled': 3, 'up': 1.
             gatewayInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.3 no-access
The table containing information for the default gateways.
                 gatewayInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.3.1 no-access
A row in the gateway information table
                     gatewayInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.3.1.1 integer32 read-only
The gateway number for which the information is related.
                     gatewayInfoAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.3.1.2 ipaddress read-only
The IP address of the default gateway.
                     gatewayInfoVlan 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.3.1.3 integer32 read-only
The VLAN number for this gateway (0 for any).
                     gatewayInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.3.1.4 integer read-only
The status of the default gateway. Enumeration: 'failed': 2, 'up': 1.
             ipInfoBootpRelayState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.4 integer read-only
The state of BOOTP relay. Enumeration: 'disabled': 3, 'enabled': 2.
             ipInfoBootpRelayAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.5 ipaddress read-only
The IP address of BOOTP server.
             ipInfoBootpRelayAddr2 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.6 ipaddress read-only
The IP address of second BOOTP server.
             ipInfoFwdState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.7 integer read-only
IP forwarding global state. Enumeration: 'on': 1, 'off': 2.
             ipInfoFwdDirectedBcast 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.8 integer read-only
The state of forwarding directed broadcasts. Enumeration: 'disabled': 3, 'enabled': 2.
             ipInfoNwfTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.9 no-access
The table of IP network filter information.
                 ipInfoNwfEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.9.1 no-access
A row in the IP network filter information table.
                     ipInfoNwfIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.9.1.1 integer32 read-only
The netowrk filter number for which the NWF is related.
                     ipInfoNwfAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.9.1.2 ipaddress read-only
The IP address of the network filter.
                     ipInfoNwfMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.9.1.3 ipaddress read-only
The subnet mask of the network filter.
                     ipInfoNwfState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.9.1.4 integer read-only
The state of the network filter. Enumeration: 'disabled': 2, 'enabled': 1.
             ipInfoRmapTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10 no-access
The table of IP route map information.
                   ipInfoRmapEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1 no-access
Information about an IP route map.
                       ipInfoRmapIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1.1 integer32 read-only
The route map number for which the RMAP is related.
                       ipInfoRmapLp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1.2 unsigned32 read-only
The local-preference of the route map. 4294967295 means none
                       ipInfoRmapMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1.3 unsigned32 read-only
The metric of the route map. 4294967295 means none
                       ipInfoRmapPrec 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1.4 integer read-only
The precedence of the route map.
                       ipInfoRmapWeight 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1.5 integer read-only
The weight of the route map. 65535 means none
                       ipInfoRmapState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1.6 integer read-only
Enable or disable the route map. Enumeration: 'disabled': 2, 'enabled': 1.
                       ipInfoRmapAp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1.7 displaystring read-only
The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
                       ipInfoRmapMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.10.1.8 integer read-only
The OSPF metric-type of the matched route. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
             ipOspfInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11
                   ipOspfInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.1 integer read-only
OSPF global state. Enumeration: 'on': 1, 'off': 2.
                   ipOspfInfoDefaultRouteMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.2 integer read-only
The metric to be assigned.
                   ipOspfInfoDefaultRouteMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.3 integer read-only
The AS External metric type to be assigned. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                   ipOspfInfoRouterID 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.4 ipaddress read-only
The router ID of the switch.
                   ipOspfInfoLsdbLimit 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.5 integer read-only
The LSDB limit for external LSA.
                   ipOspfAreaInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6 no-access
The table of OSPF Area Information.
                       ipOspfAreaInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6.1 no-access
Information about a OSPF area.
                           ipOspfAreaInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6.1.1 integer32 read-only
The OSPF area number for which the OSPF area table is related.
                           ipOspfAreaInfoId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6.1.2 ipaddress read-only
The IP Address of the OSPF area.
                           ipOspfAreaInfoSpfInterval 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6.1.3 integer read-only
The SPF interval for the OSPF area.
                           ipOspfAreaInfoAuthType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6.1.4 integer read-only
Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication. Enumeration: 'none': 1, 'password': 2, 'md5': 3.
                           ipOspfAreaInfoType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6.1.5 integer read-only
Type of Area. transit(0) stub(1) nssa(2) Enumeration: 'stub': 1, 'transit': 0, 'nssa': 2.
                           ipOspfAreaInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6.1.6 integer read-only
Metric (1-65535)
                           ipOspfAreaInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.6.1.7 integer read-only
Status disabled(0) enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
                   ipOspfRangeInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.7 no-access
The table of OSPF summary range information.
                       ipOspfRangeInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.7.1 no-access
Information about an OSPF summary range.
                           ipOspfRangeInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.7.1.1 integer32 read-only
The range number for which the OSPF summary range table is related.
                           ipOspfRangeInfoAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.7.1.2 ipaddress read-only
The IP Address of the range.
                           ipOspfRangeInfoMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.7.1.3 ipaddress read-only
The mask of the range.
                           ipOspfRangeInfoAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.7.1.4 integer32 read-only
The area index.
                           ipOspfRangeInfoHideState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.7.1.5 integer read-only
The state of the hide range. Enumeration: 'disabled': 2, 'enabled': 1.
                           ipOspfRangeInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.7.1.6 integer read-only
The state of the range. Enumeration: 'disabled': 2, 'enabled': 1.
                   ipOspfIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8 no-access
The table of OSPF Interface Information.
                       ipOspfIntfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1 no-access
Information about an OSPF Interface.
                           ipOspfIntfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.1 integer32 read-only
The OSPF Interface number for which the OSPF Interface table is related.
                           ipOspfIntfInfoId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.2 ipaddress read-only
The IP Address of the OSPF interface.
                           ipOspfIntfInfoArea 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.3 integer read-only
The index of the area that the interface belongs
                           ipOspfIntfInfoMdkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.4 integer read-only
The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
                           ipOspfIntfInfoCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.5 integer read-only
Interface cost
                           ipOspfIntfInfoPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.6 integer read-only
Interface router priority
                           ipOspfIntfInfoHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.7 integer read-only
Hello interval
                           ipOspfIntfInfoDead 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.8 integer read-only
Dead interval
                           ipOspfIntfInfoTrans 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.9 integer read-only
Transit delay
                           ipOspfIntfInfoRetra 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.10 integer read-only
Retransmit interval
                           ipOspfIntfInfoAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.11 displaystring read-only
Authentication Key
                           ipOspfIntfInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.8.1.12 integer read-only
Status of the interface disabled(0), enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
                   ipOspfVirtIntfInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9 no-access
The table of OSPF Virtual Interface Information.
                       ipOspfVirtIntfInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1 no-access
Information about an OSPF virtual Interface.
                           ipOspfVirtIntfInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.1 integer32 read-only
The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
                           ipOspfVirtIntfInfoAreaId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.2 integer read-only
The index of the OSPF area to which this virtual interface belongs.
                           ipOspfVirtIntfInfoNbr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.3 ipaddress read-only
The IP Address of the OSPF neighbor for this virtual interface.
                           ipOspfVirtIntfInfoMdkey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.4 integer read-only
The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
                           ipOspfVirtIntfInfoHello 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.5 integer read-only
Hello interval
                           ipOspfVirtIntfInfoDead 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.6 integer read-only
Dead interval
                           ipOspfVirtIntfInfoTrans 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.7 integer read-only
Transit delay
                           ipOspfVirtIntfInfoRetra 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.8 integer read-only
Retransmit interval
                           ipOspfVirtIntfInfoAuthKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.9 displaystring read-only
Authentication Key
                           ipOspfVirtIntfInfoStatus 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.9.1.10 integer read-only
Status disabled(0), enabled(1) Enumeration: 'disabled': 0, 'enabled': 1.
                   ipOspfHostInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.10 no-access
The table of OSPF Host Information.
                         ipOspfHostInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.10.1 no-access
Information about a OSPF host.
                             ipOspfHostInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.10.1.1 integer32 read-only
The OSPF host number for which the OSPF host table is related.
                             ipOspfHostInfoIpAddr 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.10.1.2 ipaddress read-only
The IP Address of the OSPF host.
                             ipOspfHostInfoAreaIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.10.1.3 integer32 read-only
The area index.
                             ipOspfHostInfoCost 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.10.1.4 integer32 read-only
The cost of the corresponding host.
                             ipOspfHostInfoState 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.10.1.5 integer read-only
Enable or disable an OSPF Host Enumeration: 'disabled': 3, 'enabled': 2.
                   ipOspfRedistributeInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11
                         ipOspfRedistributeStaticInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.1
                             ipOspfRedistributeStaticInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.1.1 integer read-only
The metric to be assigned to static routes. A value of 0 indicates none.
                             ipOspfRedistributeStaticInfoMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.1.2 integer read-only
The AS External metric type for static routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                             ipOspfRedistributeStaticInfoOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.1.3 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                         ipOspfRedistributeFixedInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.2
                             ipOspfRedistributeFixedInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.2.1 integer read-only
The export metric for fixed routes. A value of 0 indicates none
                             ipOspfRedistributeFixedInfoMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.2.2 integer read-only
The AS External metric type for fixed routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                             ipOspfRedistributeFixedInfoOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.2.3 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                         ipOspfRedistributeRipInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.3
                             ipOspfRedistributeRipInfoMetric 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.3.1 integer read-only
The export metric for RIP routes. A value of 0 indicates none
                             ipOspfRedistributeRipInfoMetricType 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.3.2 integer read-only
The AS External metric type for RIP routes. Enumeration: 'none': 1, 'type1': 2, 'type2': 3.
                             ipOspfRedistributeRipInfoOutRmapList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.11.3.3 octet string read-only
The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
                   ipOspfMd5keyInfoTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.12 no-access
The table of OSPF MD5 keys Information.
                         ipOspfMd5keyInfoEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.12.1 no-access
Information about an OSPF MD keys table.
                             ipOspfMd5keyInfoIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.12.1.1 integer32 read-only
The OSPF MD5 Key number for which the OSPF MdKey table is related.
                             ipOspfMd5keyInfoKey 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.3.8.11.12.1.2 displaystring read-only
The character string representing the MD5 Key.
     layer3Oper 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.4
         vrrpOper 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.4.1
             vrrpOperVirtRtrTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.4.1.1 no-access
An entry in the table of virtual routers.
                 vrrpOperVirtRtrEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.4.1.1.1 no-access
A row in the vrrpOperVirtRtrTable
                     vrrpOperVirtRtrIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.4.1.1.1.1 integer32 read-only
The index for the VRRP virtual router.
                     vrrpOperVirtRtrBackup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.4.1.1.1.2 integer read-write
When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read. Enumeration: 'backup': 2, 'ok': 1.
             vrrpOperVirtRtrGroupBackup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.4.1.2 integer read-write
When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read. Enumeration: 'backup': 2, 'ok': 1.
 bntTraps 1.3.6.1.4.1.11.2.3.7.11.33.6.2.7
     bntSwTrapDisplayString 1.3.6.1.4.1.11.2.3.7.11.33.6.2.7.1000 displaystring read-only
Temporary string object used to store information being sent in an BNT Switch trap.
 qos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8
     qosConfigs 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1
         qos8021p 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1
             qosCurCfgPortPriorityTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.1 no-access
The table of QOS Port Priority configuration.
                 qosCurCfgPortPriorityEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.1.1 no-access
Information about a particular QOS Port Priority configuration.
                     qosCurCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.1.1.1 integer32 read-only
Switch Port Number
                     qosCurCfgPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.1.1.2 integer read-only
Switch Port Priority Should be between 0 and 7
             qosNewCfgPortPriorityTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.2 no-access
The table of QOS Port Priority configuration.
                 qosNewCfgPortPriorityEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.2.1 no-access
Information about a particular QOS Port Priority configuration.
                     qosNewCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.2.1.1 integer32 read-only
Switch Port Number
                     qosNewCfgPortPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.2.1.2 integer read-write
Switch Port Priority Should be between 0 and 7
             qosCurCfgPriorityCoSTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.3 no-access
The table of Frame Priority and COSq configuration.
                 qosCurCfgPriorityCoSEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.3.1 no-access
Information about a particular Frame Priority and COSq configuration.
                     qosCurCfgPriorityIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.3.1.1 integer read-only
Frame priority Number
                     qosCurCfgPriorityCoSq 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.3.1.2 integer read-only
CoSq for a Frame Priority Should be between 0 and 7
             qosNewCfgPriorityCoSTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.4 no-access
The table of Frame Priority and COSq configuration.
                 qosNewCfgPriorityCoSEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.4.1 no-access
Information about a particular Frame Priority and COSq configuration.
                     qosNewCfgPriorityIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.4.1.1 integer read-only
Frame priority Number
                     qosNewCfgPriorityCoSq 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.4.1.2 integer read-write
CoSq for a Frame Priority Should be between 0 and 7
             qosCurCfgCosWeightTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.5 no-access
The table of CoSq and Weight configuration.
                 qosCurCfgCosWeightEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.5.1 no-access
Information about a particular CoSq and Weight configuration.
                     qosCurCfgCosIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.5.1.1 integer read-only
CoSq Number
                     qosCurCfgCosWeight 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.5.1.2 integer read-only
Weight of CoSq
             qosNewCfgCosWeightTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.6 no-access
The table of CoSq and Weight configuration.
                 qosNewCfgCosWeightEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.6.1 no-access
Information about a particular CoSq and Weight configuration.
                     qosNewCfgCosIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.6.1.1 integer read-only
CoSq Number
                     qosNewCfgCosWeight 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.6.1.2 integer read-write
Weight of CoSq
             qosCurCfgCosNum 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.7 integer read-only
Number of CoSq. Enumeration: 'num8': 8, 'num2': 2.
             qosNewCfgCosNum 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.8 integer read-write
Number of CoSq. Enumeration: 'num8': 8, 'num2': 2.
             qosDefaultCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.1.1.9 integer read-write
Load default configuration. Enumeration: 'defaultCosNum': 1, 'none': 0, 'defaultPriority': 3, 'defaultWeight': 2.
     qosStats 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.2
     qosInfo 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.3
     qosOper 1.3.6.1.4.1.11.2.3.7.11.33.6.2.8.4
 acl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9
     acConfig 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1
         acList 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1
             aclCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1 no-access
The table of current ACL configuration.
                 aclCurCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1 no-access
Current information about a particular ACL configuration entry.
                     aclCurCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.1 unsigned32 no-access
The index associated with this ACL entry.
                     aclCurCfgGroup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.3 unsigned32 read-only
The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
                     aclCurCfgFilterAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.4 integer read-only
The action to be performed on a packet that matches the filter settings of this ACL entry. Enumeration: 'setprio': 3, 'none': 0, 'deny': 2, 'permit': 1.
                     aclCurCfgFilterActionSetPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.5 integer read-only
The value to be used when the action to be performed is setprio for this ACL entry. Enumeration: 'none': 0, 'prio3': 4, 'prio2': 3, 'prio1': 2, 'prio0': 1, 'prio7': 8, 'prio6': 7, 'prio5': 6, 'prio4': 5.
                     aclCurCfgEthFmt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.6 integer read-only
The packet ethernet format to be filtered. Enumeration: 'ethernet2': 1, 'snap': 2, 'none': 0, 'ieee802dot3': 4, 'llc': 3.
                     aclCurCfgTagFmt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.7 integer read-only
The packet tag format to be filtered. Enumeration: 'disabled': 1, 'untagged': 3, 'tagged': 4, 'any': 2.
                     aclCurCfgIPFmt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.8 integer read-only
The packet IP format to be filtered. Enumeration: 'none': 1, 'ipv4': 2, 'ipv6': 3.
                     aclCurCfgSrcMACAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.9 macaddress read-only
The source MAC address to be filtered.
                     aclCurCfgSrcMACMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.10 macaddress read-only
The address mask applied to aclCurCfgSrcMACAddress for filtering.
                     aclCurCfgDstMACAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.11 macaddress read-only
The destination MAC address to be filtered.
                     aclCurCfgDstMACMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.12 macaddress read-only
The address mask applied to aclCurCfgDstMACAddress for filtering.
                     aclCurCfgEthernetTypeName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.13 integer read-only
The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered. Enumeration: 'arp': 1, 'none': 0, 'mpls': 4, 'rarp': 5, 'other': 7, 'ipv4': 2, 'ipv6': 3, 'any': 6.
                     aclCurCfgEthernetTypeValue 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.14 integer read-only
The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
                     aclCurCfgVLanId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.15 integer read-only
The virtual LAN identifier to be filtered.
                     aclCurCfgVLanMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.16 displaystring read-only
The mask applied to aclCurCfgVLanId for filtering.
                     aclCurCfg8021pPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.17 integer read-only
The 802.1p priority to be filtered. Enumeration: 'none': 0, 'priority1': 2, 'priority0': 1, 'priority3': 4, 'priority2': 3, 'priority5': 6, 'priority4': 5, 'priority7': 8, 'priority6': 7.
                     aclCurCfgTypeOfService 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.18 displaystring read-only
The type of service to be filtered.
                     aclCurCfgProtocol 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.19 displaystring read-only
The protocol to be filtered.
                     aclCurCfgSrcIPAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.20 ipaddress read-only
The source IP address to be filtered.
                     aclCurCfgSrcIPMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.21 ipaddress read-only
The address mask applied to aclCurCfgSrcIPAddress for filtering.
                     aclCurCfgDstIPAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.22 ipaddress read-only
The destination IP address to be filtered.
                     aclCurCfgDstIPMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.23 ipaddress read-only
The address mask applied to aclCurCfgDstIPAddress for filtering.
                     aclCurCfgSrcPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.24 integer read-only
The source TCP/UDP port number to be filtered.
                     aclCurCfgSrcPortMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.25 displaystring read-only
The mask applied to aclCurCfgSrcPort for filtering.
                     aclCurCfgDstPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.26 integer read-only
The destination TCP/UDP port number to be filtered.
                     aclCurCfgDstPortMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.27 displaystring read-only
The mask applied to aclCurCfgDstPort for filtering.
                     aclCurCfgTCPFlags 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.28 bits read-only
The TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Bits: 'tcpFIN': 7, 'tcpSYN': 6, 'tcpPSH': 4, 'tcpURG': 2, 'tcpRST': 5, 'reserved1': 0, 'tcpACK': 3, 'reserved2': 1.
                     aclCurCfgEgressPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.29 octet string read-only
The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
                     aclCurCfgStatistics 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.30 integer read-only
Whether statistics collection for this ACL is enabled or not. Enumeration: 'enable': 1, 'disable': 0.
                     aclCurCfgTCPFlagsMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.39 bits read-only
The TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Bits: 'tcpFIN': 7, 'tcpSYN': 6, 'tcpPSH': 4, 'tcpURG': 2, 'tcpRST': 5, 'reserved1': 0, 'tcpACK': 3, 'reserved2': 1.
                     aclCurCfgMeterAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.41 integer read-only
Meter Action for this ACL. Enumeration: 'outpass': 2, 'outdrop': 1, 'unconfigured': 0.
                     aclCurCfgMeterEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.42 integer read-only
Meter state for this ACL. Enumeration: 'disabled': 1, 'enabled': 0.
                     aclCurCfgKbitsSec 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.43 unsigned32 read-only
The commited rate of meter associated with this ACL entry.
                     aclCurCfgKbitsBurst 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.44 integer read-only
The maxmium burst sizeof meter associated with this ACL entry. Enumeration: 'kbits64': 64, 'kbits256': 256, 'kbits1024': 1024, 'kbits2048': 2048, 'kbits4096': 4096, 'kbits128': 128, 'kbits32': 32, 'kbits512': 512.
                     aclCurCfgInprofUser 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.45 integer read-only
Set in profile user defined priority for this ACL.
                     aclCurCfgInprofDscp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.46 integer read-only
Set in profile pkts DSCP value.
                     aclCurCfgInprofTos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.47 integer read-only
To enable/disable setting in profile pkts based on TOS bits. Enumeration: 'enable': 1, 'disable': 0.
                     aclCurCfgOutprofDscp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.48 integer read-only
Set out profile pkts DSCP value.
                     aclCurCfgInprofUserEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.49 integer read-only
Set in profile update method for this ACL. Enumeration: 'disabled': 0, 'userdefined': 1.
                     aclCurCfgInprofDscpEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.50 integer read-only
Whether in profile update DSCP for this ACL is enabled or not. Enumeration: 'enable': 1, 'disable': 0.
                     aclCurCfgOutprofDscpEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.1.1.51 integer read-only
Whether out profile update DSCP for this ACL is enabled or not. Enumeration: 'enable': 1, 'disable': 0.
             aclNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2 no-access
The table of new ACL configuration.
                 aclNewCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1 no-access
New information about a particular ACL configuration.
                     aclNewCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.1 unsigned32 read-only
The index associated with this ACL entry.
                     aclNewCfgGroup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.3 unsigned32 read-only
The index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
                     aclNewCfgFilterAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.4 integer read-write
The action to be performed on a packet that matches the filter settings of this ACL entry. Enumeration: 'setprio': 3, 'none': 0, 'deny': 2, 'permit': 1.
                     aclNewCfgFilterActionSetPrio 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.5 integer read-write
The COS queue to be used when the action for this ACL entry is set to setprio. Enumeration: 'none': 0, 'prio3': 4, 'prio2': 3, 'prio1': 2, 'prio0': 1, 'prio7': 8, 'prio6': 7, 'prio5': 6, 'prio4': 5.
                     aclNewCfgEthFmt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.6 integer read-write
The packet ethernet format to be filtered. Enumeration: 'ethernet2': 1, 'snap': 2, 'none': 0, 'llc': 3.
                     aclNewCfgTagFmt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.7 integer read-write
The packet tagging format to be filtered. Enumeration: 'disabled': 1, 'none': 3, 'tagged': 4, 'any': 2.
                     aclNewCfgIPFmt 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.8 integer read-write
The packet IP format to be filtered. Enumeration: 'none': 1, 'ipv4': 2, 'ipv6': 3.
                     aclNewCfgSrcMACAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.9 macaddress read-write
The source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff.
                     aclNewCfgSrcMACMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.10 macaddress read-write
The address mask to be applied to aclNewCfgSrcMACAddress for filtering.
                     aclNewCfgDstMACAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.11 macaddress read-write
The destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatically set to ff:ff:ff:ff:ff.
                     aclNewCfgDstMACMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.12 macaddress read-write
The address mask to be applied to aclNewCfgDstMACAddress for filtering.
                     aclNewCfgEthernetTypeName 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.13 integer read-write
The Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be filtered. If this object is set to a value other than other(7), the value of the aclNewCfgEthernetTypeValue object is automatically set, as follows: aclNewCfgEthernetTypeName aclNewCfgEthernetTypeValue none(0) 0 arp(1) 2054 (0x0806) ipv4(2) 2048 (0x0800) ipv6(3) 34525 (0x86dd) mpls(4) 34887 (0x8847) rarp(5) 32821 (0x8035) any(6) 65535 (0xffff) Enumeration: 'arp': 1, 'none': 0, 'mpls': 4, 'rarp': 5, 'other': 7, 'ipv4': 2, 'ipv6': 3, 'any': 6.
                     aclNewCfgEthernetTypeValue 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.14 integer read-write
The Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthernetTypeName is other(7), which can be any user-defined value for this object.
                     aclNewCfgVLanId 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.15 integer read-write
The virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically set to 4095 (0xfff).
                     aclNewCfgVLanMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.16 displaystring read-write
The mask to be applied to aclNewCfgVLanId for filtering.
                     aclNewCfg8021pPriority 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.17 integer read-write
The 802.1p priority to be filtered. Enumeration: 'none': 0, 'priority1': 2, 'priority0': 1, 'priority3': 4, 'priority2': 3, 'priority5': 6, 'priority4': 5, 'priority7': 8, 'priority6': 7.
                     aclNewCfgTypeOfService 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.18 displaystring read-write
The type of service to be filtered.
                     aclNewCfgProtocol 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.19 displaystring read-write
The protocol to be filtered.
                     aclNewCfgSrcIPAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.20 ipaddress read-write
The source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set to 255.255.255.255.
                     aclNewCfgSrcIPMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.21 ipaddress read-write
The address mask to be applied to aclNewCfgSrcIPAddress for filtering.
                     aclNewCfgDstIPAddress 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.22 ipaddress read-write
The destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically set to 255.255.255.255.
                     aclNewCfgDstIPMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.23 ipaddress read-write
The address mask to be applied to aclNewCfgDstIPAddress for filtering.
                     aclNewCfgSrcPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.24 integer read-write
The source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0xffff).
                     aclNewCfgSrcPortMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.25 displaystring read-write
The mask to be applied to aclNewCfgSrcPort for filtering.
                     aclNewCfgDstPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.26 integer read-write
The destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 65535 (0xffff).
                     aclNewCfgDstPortMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.27 displaystring read-write
The mask to be applied to aclNewCfgDstPort for filtering.
                     aclNewCfgTCPFlags 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.28 bits read-write
The TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Bits: 'tcpFIN': 7, 'tcpSYN': 6, 'tcpPSH': 4, 'tcpURG': 2, 'tcpRST': 5, 'reserved1': 0, 'tcpACK': 3, 'reserved2': 1.
                     aclNewCfgEgressPorts 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.29 octet string read-only
The port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ port 9 || || || ||___ port 8 || |____ port 7 || . . . ||_________ port 2 |__________ port 1 where x: 1 - the represented port is configured for filtering. 0 - the represented port is not configured for filtering.
                     aclNewCfgStatistics 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.30 integer read-write
Whether statistics collection for this ACL is enabled or not. Enumeration: 'enable': 1, 'disable': 0.
                     aclNewCfgAddEgressPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.31 integer read-write
The port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
                     aclNewCfgRemoveEgressPort 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.32 unsigned32 read-write
The port to be removed from the specified ACL. A value of zero is always returned when this object is read.
                     aclNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.33 integer read-write
This is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read. Enumeration: 'other': 1, 'delete': 2.
                     aclNewCfgTCPFlagsMask 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.39 bits read-write
The TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________reserved1(0) where: - reserved1 - 0; - reserved2 - 0; - x - 0 or 1; Default value is 0x3f. Bits: 'tcpFIN': 7, 'tcpSYN': 6, 'tcpPSH': 4, 'tcpURG': 2, 'tcpRST': 5, 'reserved1': 0, 'tcpACK': 3, 'reserved2': 1.
                     aclNewCfgMeterAction 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.41 integer read-write
Meter Action for this ACL. Enumeration: 'outpass': 2, 'outdrop': 1, 'unconfigured': 0.
                     aclNewCfgMeterEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.42 integer read-write
Meter state for this ACL. Enumeration: 'disabled': 1, 'enabled': 0.
                     aclNewCfgKbitsSec 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.43 unsigned32 read-write
The commited rate of meter associated with this ACL entry.
                     aclNewCfgKbitsBurst 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.44 integer read-write
The maxmium burst sizeof meter associated with this ACL entry. Enumeration: 'kbits64': 64, 'kbits256': 256, 'kbits1024': 1024, 'kbits2048': 2048, 'kbits4096': 4096, 'kbits128': 128, 'kbits32': 32, 'kbits512': 512.
                     aclNewCfgInprofUser 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.45 integer read-write
Set in profile user defined priority for this ACL.
                     aclNewCfgInprofDscp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.46 integer read-write
Set in profile pkts DSCP value.
                     aclNewCfgInprofTos 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.47 integer read-write
To enable/disable setting in profile pkts based on TOS bits. Enumeration: 'enable': 1, 'disable': 0.
                     aclNewCfgOutprofDscp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.48 integer read-write
Set out profile pkts DSCP value.
                     aclNewCfgInprofUserEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.49 integer read-write
Set in profile update method for this ACL. Enumeration: 'disabled': 0, 'userdefined': 1.
                     aclNewCfgInprofDscpEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.50 integer read-write
Whether in profile update DSCP for this ACL is enabled or not. Enumeration: 'enable': 1, 'disable': 0.
                     aclNewCfgOutprofDscpEnable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.51 integer read-write
Whether out profile update DSCP for this ACL is enabled or not. Enumeration: 'enable': 1, 'disable': 0.
                     aclNewCfgReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.52 integer read-write
This is an action object to reset an ACL entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
                     aclNewCfgEthernetReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.53 integer read-write
This is an action object to reset an ACL Ethernet entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
                     aclNewCfgIpv4Reset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.54 integer read-write
This is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
                     aclNewCfgTcpudpReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.55 integer read-write
This is an action object to reset an ACL Tcpudp entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
                     aclNewCfgMeterReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.56 integer read-write
This is an action object to reset an ACL Meter entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
                     aclNewCfgRemarkReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.57 integer read-write
This is an action object to reset an ACL Remark entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
                     aclNewCfgRemarkInprofReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.58 integer read-write
This is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
                     aclNewCfgRemarkOutprofReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.59 integer read-write
This is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
                     aclNewCfgPktfmtReset 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.1.2.1.60 integer read-write
This is an action object to reset an ACL Pktfmt entry. A value of other(1) is always returned when this object is read. Enumeration: 'reset': 2, 'other': 1.
         aclGroup 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3
             aclGroupCurCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.1 no-access
The table of current ACL Group configuration.
                 aclGroupCurCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.1.1 no-access
Information about a particular ACL configuration.
                     aclGroupCurCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.1.1.1 unsigned32 read-only
The index associated with this ACL Group entry.
                     aclGroupCurCfgMemberAcls 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.1.1.2 octet string read-only
The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
             aclGroupNewCfgTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.2 no-access
The table of new ACL Group configuration.
                 aclGroupNewCfgEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.2.1 no-access
New information about a particular ACL configuration.
                     aclGroupNewCfgIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.2.1.1 unsigned32 read-only
The index associated with this ACL Group entry.
                     aclGroupNewCfgMemberAcls 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.2.1.2 octet string read-only
The ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ ACL 8 || |____ ACL 7 || . . . ||_________ ACL 2 |__________ ACL 1 where x: 1 - the represented ACL is a member of the group. 0 - the represented ACL is not a member of the group.
                     aclGroupNewCfgAddAcl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.2.1.4 unsigned32 read-write
The index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
                     aclGroupNewCfgRemoveAcl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.2.1.5 unsigned32 read-write
The index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in the aclGroupNewCfgMemberAcls bitmap. A value of zero is always returned when this object is read.
                     aclGroupNewCfgDelete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.3.2.1.8 integer read-write
This is an action object to delete an ACL group. A value of other(1) is always returned when this object is read. Enumeration: 'other': 1, 'delete': 2.
         aclCfg 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4
             aclCurCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.1 no-access
The table of port acl groups configuration.
                 aclCurCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.1.1 no-access
Information about a particular port acl configuration.
                     aclCurCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.1.1.1 integer32 read-only
The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
                     aclCurCfgPortAclBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.1.1.2 octet string read-only
The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ acl 9 || || || ||___ acl 8 || |____ acl 7 || . . . ||_________ acl 2 |__________ acl 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
                     aclCurCfgPortAclGrpBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.1.1.4 octet string read-only
The acl groups applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ aclgrp 9 || || || ||___ aclgrp 8 || |____ aclgrp 7 || . . . ||_________ aclgrp 2 |__________ aclgrp 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
             aclNewCfgPortTable 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2 no-access
The table of port acl configuration.
                 aclNewCfgPortTableEntry 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2.1 no-access
Information about a particular port acl groups configuration.
                     aclNewCfgPortIndex 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2.1.1 integer32 read-only
The identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
                     aclNewCfgPortAddAcl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2.1.2 unsigned32 read-write
The acl to be added to the specified port. A '0' value is returned when read.
                     aclNewCfgPortAddAclGrp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2.1.4 unsigned32 read-write
The acl group to be added to the specified port. A '0' value is returned when read.
                     aclNewCfgPortRemoveAcl 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2.1.5 unsigned32 read-write
The acl to be removed from the specified port. A '0' value is returned when read.
                     aclNewCfgPortRemoveAclGrp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2.1.7 unsigned32 read-write
The acl group to be removed from the specified port. A '0' value is returned when read.
                     aclNewCfgPortAclBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2.1.8 octet string read-only
The acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ acl 9 || || || ||___ acl 8 || |____ acl 7 || . . . ||_________ acl 2 |__________ acl 1 where x : 1 - The represented acl applied to the port. 0 - The represented acl not applied to the port.
                     aclNewCfgPortAclGrpBmap 1.3.6.1.4.1.11.2.3.7.11.33.6.2.9.1.4.2.1.10 octet string read-only
The acl groups applied to the port. The acl groups are presented in bitmap format. This string displays group number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ aclgrp 9 || || || ||___ aclgrp 8 || |____ aclgrp 7 || . . . ||_________ aclgrp 2 |__________ aclgrp 1 where x : 1 - The represented acl group applied to the port. 0 - The represented acl group not applied to the port.
       bntSwDefGwUp 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.2
A bntSwDefGwUp trap signifies that the default gateway is alive.
       bntSwDefGwDown 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.3
A bntSwDefGwDown trap signifies that the default gateway is down.
       bntSwDefGwInService 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.4
A bntSwDefGwEnabled trap signifies that the default gateway is up and in service.
       bntSwDefGwNotInService 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.5
A bntSwDefGwDisabled trap signifies that the default gateway is alive but not in service.
       bntSwLoginFailure 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.19
A bntSwLoginFailure trap signifies that someone failed to enter a valid username/password combination.
       bntSwTempExceedThreshold 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.22
A bntSwTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
       bntSwApplyComplete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.27
A bntSwApplyComplete signifies that new configuration has been applied.
       bntSwSaveComplete 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.28
A bntSwApplyComplete signifies that new configuration has been saved.
       bntSwFwDownloadSucess 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.29
A bntSwFwDownloadSuccess signifies that firmware has been downloaded to [image1|image2|boot image].
       bntSwFwDownloadFailure 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.30
A bntSwFwDownloadFailure signifies that firmware downloaded failed to [image1|image2|boot image].
       bntSwTempReturnThreshold 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.31
A bntSwTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
       bntSwUfdfoLtMFailure 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.34
A bntSwUfdfoLtMFailure trap signifies that a LtM link is down.
       bntSwUfdfoLtMUP 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.35
A bntSwUfdfoLtMUP trap signifies that a LtM link is up.
       bntSwUfdfoGlobalEna 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.36
A bntSwUfdfoGlobalEna trap signifies that Global UFD is enabled.
       bntSwUfdfoGlobalDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.37
A bntSwUfdfoGlobalDis trap signifies that Global UFD is disabled.
       bntSwUfdfoLtDAutoEna 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.38
A bntSwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled.
       bntSwUfdfoLtDAutoDis 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.39
A bntSwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled.
       bntSwStgNewRoot 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.42
A bntSwStgNewRoot trap signifies that the bridge has become the new root of the STG.
       bntSwCistNewRoot 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.43
A bntSwCistNewRoot trap signifies that the bridge has become the new root of the CIST.
       bntSwStgTopologyChanged 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.44
A bntSwStgTopologyChanged trap signifies that there was a STG topology change.
       bntSwCistTopologyChanged 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.45
A bntSwCistTopologyChanged trap signifies that there was a CIST topology change.
       bntSFPInserted 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.51
A bntSFPInserted trap signifies that a SFP is inserted.
       bntSFPRemoved 1.3.6.1.4.1.11.2.3.7.11.33.6.2.70.52
A bntSFPRemoved trap signifies that a SFP is removed.