BIANCA-BRICK-X21-MIB: View SNMP OID List / Download MIB

VENDOR: BINTEC COMMUNICATIONS GMBH


 Home MIB: BIANCA-BRICK-X21-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 org 1.3
     dod 1.3.6
         internet 1.3.6.1
             private 1.3.6.1.4
                 enterprises 1.3.6.1.4.1
                     bintec 1.3.6.1.4.1.272
                             bibo 1.3.6.1.4.1.272.4
                                 x21 1.3.6.1.4.1.272.4.10
                                       x21IfTable 1.3.6.1.4.1.272.4.10.1 no-access
The x21IfTable contains information relating to the interfaces found on the system. Each entry corresponds to a connected X21 interface. Entries can only be added or deleted by the system. Creating entries: Entries are created by the system only when a new X21 module is installed. Deleting entries: Entries are removed by the system after the appropriate X21 module is removed.
                                           x21IfEntry 1.3.6.1.4.1.272.4.10.1.1 no-access
                                               x21IfIndex 1.3.6.1.4.1.272.4.10.1.1.1 integer read-only
Unique index of the X21 interface.
                                               x21IfL1State 1.3.6.1.4.1.272.4.10.1.1.2 integer read-only
The X21 physical layer state dn(1) physical layer is inactive; up(2) physical layer is active; Enumeration: 'dn': 1, 'up': 2.
                                               x21IfL1Mode 1.3.6.1.4.1.272.4.10.1.1.3 integer read-write
The physical layer (layer 1) mode. When configured as DCE(2) the X21 interface provides the clock. Enumeration: 'dce': 2, 'dte': 1.
                                               x21IfIfLeads 1.3.6.1.4.1.272.4.10.1.1.4 integer read-write
The value of IfLeads has influence on the state of the physical layer (L1State). When configured as IfLeads=enabled(1), the state of the physical layer depends on the signals of the X.21 interface pins `Indication' and `Control'. When configured as IfLeads=disabled(2), the state of the physical layer stays always up. Enumeration: 'disabled': 2, 'enabled': 1.
                                               x21IfSpeed 1.3.6.1.4.1.272.4.10.1.1.5 integer read-write
The X21 interface speed in bits per second. The range can be configured between 2Mbits and 2400 Bits per second. Enumeration: 's38400': 7, 's9600': 10, 's512k': 3, 's2048k': 1, 's256k': 4, 's1024k': 2, 's64000': 6, 's14400': 9, 's2400': 11, 's128k': 5, 's19200': 8.
                                               x21IfL2Mode 1.3.6.1.4.1.272.4.10.1.1.6 integer read-write
The layer 2 mode. This value has influence on the HDLC address field (first byte of a HDCL frame). When configured as DTE(1) the address in a command frame is 0x01, when configured as DCE(2) it is 0x03. For response frames it is vice versa. When configured as AUTO(3), layer 2 is set to the same mode like L1Mode is set. Enumeration: 'auto': 3, 'dce': 2, 'dte': 1.
                                               x21IfSpeedReal 1.3.6.1.4.1.272.4.10.1.1.7 counter read-only
The measured X21 interface speed in bits per second.
                                               x21IfRxPackets 1.3.6.1.4.1.272.4.10.1.1.8 counter read-only
Count of received valid Frames.
                                               x21IfRxOctets 1.3.6.1.4.1.272.4.10.1.1.9 counter read-only
Count of received bytes.
                                               x21IfTxPackets 1.3.6.1.4.1.272.4.10.1.1.10 counter read-only
Count of transmitted valid Frames.
                                               x21IfTxOctets 1.3.6.1.4.1.272.4.10.1.1.11 counter read-only
Count of transmitted bytes.
                                               x21IfRxResets 1.3.6.1.4.1.272.4.10.1.1.12 counter read-only
Count of receiver resets. Under rare circumstances it might be necessary to reset the receiver to work properly.
                                               x21IfRxAborts 1.3.6.1.4.1.272.4.10.1.1.13 counter read-only
Count of receiver aborts. The sender of a frame can indicate a frame as aborted with a special Abort sequence.
                                               x21IfRxOverruns 1.3.6.1.4.1.272.4.10.1.1.14 counter read-only
Count of receiver overruns. If the X21 card is unable to grant sufficiently soon/often the bus, the 32-character RxFIFO may fill up. This leads to loss of data.
                                               x21IfRxCRCErrors 1.3.6.1.4.1.272.4.10.1.1.15 counter read-only
Count of corrupted frames. Errors due to interference on the X21 cable.
                                               x21IfRxGiantFrames 1.3.6.1.4.1.272.4.10.1.1.16 counter read-only
Count of received frames with illegal framesize. This can occur if a frame delimiter is destroyed.
                                               x21IfTxResets 1.3.6.1.4.1.272.4.10.1.1.17 counter read-only
Count of transmitter resets. Under rare circumstances it might be necessary to reset the transmitter to work properly.
                                               x21IfTxAborts 1.3.6.1.4.1.272.4.10.1.1.18 counter read-only
Count of transmitter aborts. While sending a frame it might be necessary to indicate this frame as aborted. In this case the receiver regards this frame as illegal.
                                               x21IfTxUnderruns 1.3.6.1.4.1.272.4.10.1.1.19 counter read-only
Count of transmitter underruns. The serial data for the X21 card is supplied too slowly.
                                               x21IfTxGiantFrames 1.3.6.1.4.1.272.4.10.1.1.20 counter read-only
Count of transmitted frames with illegal framesize. This can occur if an upper module creates packets with more than the maximum allowed packet size.