BIANCA-BRICK-SEC-MIB: View SNMP OID List / Download MIB

VENDOR: BINTEC COMMUNICATIONS GMBH


 Home MIB: BIANCA-BRICK-SEC-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 org 1.3
     dod 1.3.6
         internet 1.3.6.1
             private 1.3.6.1.4
                 enterprises 1.3.6.1.4.1
                     bintec 1.3.6.1.4.1.272
                             bintecsec 1.3.6.1.4.1.272.254
                                     biboAdmAdminCommunity 1.3.6.1.4.1.272.254.1 displaystring read-write
The Community name used for admin access
                                     biboAdmReadCommunity 1.3.6.1.4.1.272.254.2 displaystring read-write
The Community name used for read-only access.
                                     biboAdmWriteCommunity 1.3.6.1.4.1.272.254.3 displaystring read-write
The Community name used for read-write access.
                                     biboAdmLicenseTable 1.3.6.1.4.1.272.254.4 no-access
This table contains the licenses, purchased for this BIANCA/BRICK. Each entry describes a license. Each license can enable one or more features of the BIANCA/BRICK, when the activation key is correct. Please Note, that a license is only valid for the BIANCA/BRICK it has been purchased for.
                                         biboAdmLicenseEntry 1.3.6.1.4.1.272.254.4.1 no-access
                                             biboAdmLicenseSerialNumber 1.3.6.1.4.1.272.254.4.1.1 integer read-write
This object specifies the serial number of the license in case of a numerical license (together with 'Mask' and 'Key').
                                             biboAdmLicenseMask 1.3.6.1.4.1.272.254.4.1.2 integer read-write
The LicenseMask is a bitfield, that specifies the different features enabled by the license. (only used on a numerical license).
                                             biboAdmLicenseKey 1.3.6.1.4.1.272.254.4.1.3 displaystring read-write
This object contains the activation key. A license is only valid, if the activation key is correct.
                                             biboAdmLicenseState 1.3.6.1.4.1.272.254.4.1.4 integer read-write
To delete a license from the system, this object has to be set to delete. In case of an 'internal-ok' license the license can be erased from the modules EEPROM, if it is set to 'internal-erase'. The state will be 'not-supported' if a license refers to a feature which is not supported by the image loaded. With 'delete' it is only deleted from the main board flash memory. Enumeration: 'ok': 1, 'internal-ok': 4, 'not-supported': 6, 'internal-erase': 5, 'not-ok': 2, 'delete': 3.
                                             biboAdmLicenseSerialId 1.3.6.1.4.1.272.254.4.1.5 displaystring read-write
This object specifies the serial id string of the license in case of string license (together with 'Key').
                                             biboAdmLicenseHwSerial 1.3.6.1.4.1.272.254.4.1.6 displaystring read-only
This object contains the device Hardware serial number for which the license is purchased for.
                                             biboAdmLicenseLicType 1.3.6.1.4.1.272.254.4.1.7 integer read-only
The type of licenseable feature. Enumeration: 'ipsec': 33, 'bridge': 3, 'modem': 132, 'frame-relay': 7, 'ip': 1, 'extended-wan': 13, 'pri': 131, 'tapi': 8, 'taf': 12, 'g703': 130, 'stac': 6, 'bri': 129, 'extended-lan': 10, 'x25': 4, 'ethernet': 128, 'ipx': 5, 'tunneling': 11, 'ospf': 9, 'leased-line': 14, 'capi': 2.
                                     biboAdmRadiusSecret 1.3.6.1.4.1.272.254.5 displaystring read-write
The shared secret for RADIUS access.
                                     biboAdmHttpPassword 1.3.6.1.4.1.272.254.6 displaystring read-write
The password for HTTP access.
                                     biboAdmLoginTable 1.3.6.1.4.1.272.254.7 no-access
The biboAdmLoginTable defines additional users and their passwords, and the commnd to be executed at login.
                                         biboAdmLoginEntry 1.3.6.1.4.1.272.254.7.1 no-access
                                             biboAdmLoginUser 1.3.6.1.4.1.272.254.7.1.1 displaystring read-write
This is the login name.
                                             biboAdmLoginPassword 1.3.6.1.4.1.272.254.7.1.2 displaystring read-write
This is the user password.
                                             biboAdmLoginCommand 1.3.6.1.4.1.272.254.7.1.3 displaystring read-write
This is the command, which is started at login, e.g. sh, telnet. All external commands are possible.
                                             biboAdmLoginState 1.3.6.1.4.1.272.254.7.1.4 integer read-write
The variable is used to disable or discard the entry. Enumeration: 'valid': 1, 'invalid': 3, 'delete': 2.
                                     biboAdmPublicKey 1.3.6.1.4.1.272.254.10 octet string read-only
Generated public key for TAF client access
                                     biboAdmPrivateKey 1.3.6.1.4.1.272.254.11 octet string no-access
                                     biboAdmActMonPassword 1.3.6.1.4.1.272.254.12 displaystring read-write
The password for Activity Monitor access.