BIANCA-BRICK-PPTP-MIB: View SNMP OID List / Download MIB

VENDOR: BINTEC COMMUNICATIONS GMBH


 Home MIB: BIANCA-BRICK-PPTP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 org 1.3
     dod 1.3.6
         internet 1.3.6.1
             private 1.3.6.1.4
                 enterprises 1.3.6.1.4.1
                     bintec 1.3.6.1.4.1.272
                             bibo 1.3.6.1.4.1.272.4
                                 vpn 1.3.6.1.4.1.272.4.23
                                       pptpProfileTable 1.3.6.1.4.1.272.4.23.1 no-access
The pptpProfileTable contains parameters for the Point-to-Point Tunneling Protocol (PPTP) according RFC 2637. Entries are removed by setting an entry's pptpProfileKeepalive object to 'delete'.
                                           pptpProfileEntry 1.3.6.1.4.1.272.4.23.1.1 no-access
                                               pptpProfileId 1.3.6.1.4.1.272.4.23.1.1.1 integer read-write
The profile ID of the PPTP profile.
                                               pptpProfileKeepalive 1.3.6.1.4.1.272.4.23.1.1.2 integer read-write
When set to on(1), PPTP echo requests as described in RFC 2637 are sent in regular intervals during the connection. If set to off(2), no PPTP echo requests will be performed, delete(3) determines the entry is marked for discard. Enumeration: 'on': 1, 'off': 2, 'delete': 3.
                                               pptpProfileMaxRequests 1.3.6.1.4.1.272.4.23.1.1.3 integer read-write
The maximum number of outstanding PPTP echo replies, until the PPTP control connection is droped and all associated calls are terminated.
                                               pptpProfileMaxBlockTime 1.3.6.1.4.1.272.4.23.1.1.4 integer read-write
Maximum time (in msec) the GRE Send Window is blocked. If the GRE Send Window is full, no packets can be forwarded and the Maximum Time is passed, the GRE Send Window is resetted to prevent unsolvable situations.
                                               pptpProfileMaxAckTimeout 1.3.6.1.4.1.272.4.23.1.1.5 integer read-write
Maximum value the adaptive Acknowledgment Timeout (in msec) can reach while it is calculated. According to RFC 2637.
                                               pptpProfileReassemblyTimeout 1.3.6.1.4.1.272.4.23.1.1.6 integer read-write
Maximum time (in msec) for rearranging out-of-sequence packets. After this time outstanding packets will be supposed missing.
                                       pptpCtlConnTable 1.3.6.1.4.1.272.4.23.2 no-access
The pptpCtlConnTable displays all currently active PPTP dontrol connections Only the system can add or remove entries to this table. Creating entries: Entries are added when an outgoing or incoming TCP connection (port 1723) is established. Deleting entries: Entries are removed once the respective PPTP control connection is disconnected.
                                           pptpCtlConnEntry 1.3.6.1.4.1.272.4.23.2.1 no-access
                                               pptpCtlConnOriginator 1.3.6.1.4.1.272.4.23.2.1.1 integer read-only
The originator of the PPTP control connection. Enumeration: 'remote': 2, 'local': 1.
                                               pptpCtlConnAge 1.3.6.1.4.1.272.4.23.2.1.2 timeticks read-only
The age of the PPTP control connection. The format is in hh:mm:ss.00.
                                               pptpCtlConnState 1.3.6.1.4.1.272.4.23.2.1.3 integer read-write
The state of the PPTP control connection according RFC 2637. Enumeration: 'wait-stop-reply': 4, 'established': 3, 'idle': 1, 'wait-ctl-reply': 2.
                                               pptpCtlConnRemoteIpAddress 1.3.6.1.4.1.272.4.23.2.1.4 ipaddress read-only
The IP address of the remote PPTP tunnel endpoint.
                                               pptpCtlConnLocalIpAddress 1.3.6.1.4.1.272.4.23.2.1.5 ipaddress read-only
The IP address of the local PPTP tunnel endpoint.
                                               pptpCtlConnVersion 1.3.6.1.4.1.272.4.23.2.1.6 integer read-only
This variable contains the negotiated PPTP version.
                                               pptpCtlConnHost 1.3.6.1.4.1.272.4.23.2.1.7 displaystring read-only
DNS name of the issuing PAC or PNS.
                                               pptpCtlConnVendor 1.3.6.1.4.1.272.4.23.2.1.8 displaystring read-only
Vendor specific string describing the type of PAC or PNS being used on remote side.
                                               pptpCtlConnFirmRev 1.3.6.1.4.1.272.4.23.2.1.9 integer read-only
This variable contains the firmware revision number of the issuing PAC or PNS.
                                       pptpCallTable 1.3.6.1.4.1.272.4.23.3 no-access
The pptpCallTable displays all currently active PPTP calls (incoming and outgoing). Only the system can add or remove entries to this table. Creating entries: Entries are added when an outgoing call is made or when an incoming call is connected. Deleting entries: Entries are removed once the respective call is disconnected.
                                           pptpCallEntry 1.3.6.1.4.1.272.4.23.3.1 no-access
                                               pptpCallType 1.3.6.1.4.1.272.4.23.3.1.1 integer read-only
The PPTP call type. Enumeration: 'pns': 2, 'pac': 1.
                                               pptpCallDirection 1.3.6.1.4.1.272.4.23.3.1.2 integer read-only
Direction of the PPTP call, incoming(1) or outgoing(2). Enumeration: 'outgoing': 2, 'incoming': 1.
                                               pptpCallAge 1.3.6.1.4.1.272.4.23.3.1.3 timeticks read-only
The age of the call. For outgoing calls, the time since the call began, or for incoming calls, the time since the call was received. The format is in hh:mm:ss.00.
                                               pptpCallState 1.3.6.1.4.1.272.4.23.3.1.4 integer read-write
The state of the PPTP call according RFC 2637. Enumeration: 'established': 5, 'wait-disc': 6, 'wait-cs-ans': 2, 'wait-reply': 3, 'wait-connect': 4, 'idle': 1.
                                               pptpCallRemoteIpAddress 1.3.6.1.4.1.272.4.23.3.1.5 ipaddress read-only
The called (for outgoing calls) or calling IP address (for incoming calls).
                                               pptpCallLocalIpAddress 1.3.6.1.4.1.272.4.23.3.1.6 ipaddress read-only
The calling (for outgoing calls) or called IP address (for incoming calls).
                                               pptpCallReceivedPackets 1.3.6.1.4.1.272.4.23.3.1.7 counter read-only
Count of received valid GRE-encapsulated packets.
                                               pptpCallReceivedOctets 1.3.6.1.4.1.272.4.23.3.1.8 counter read-only
Count of received valid Octets.
                                               pptpCallReceivedErrors 1.3.6.1.4.1.272.4.23.3.1.9 counter read-only
Count of received invalid GRE-encapsulated packets.
                                               pptpCallTransmitPackets 1.3.6.1.4.1.272.4.23.3.1.10 counter read-only
Count of transmitted GRE-encapsulated packets.
                                               pptpCallTransmitOctets 1.3.6.1.4.1.272.4.23.3.1.11 counter read-only
Count of transmitted Octets.
                                               pptpCallTransmitErrors 1.3.6.1.4.1.272.4.23.3.1.12 counter read-only
Count of transmit errors.
                                               pptpCallInfo 1.3.6.1.4.1.272.4.23.3.1.13 displaystring read-only
Additional information to identify the PPTP call
                                       pptpCreditsTable 1.3.6.1.4.1.272.4.23.4 no-access
The pptpCreditsTable contains informations about current used resources and maximum allowed resources for each during a specified interval subsystem. Creating entries: Entries are added by the system during startup. Deleting entries: Is not possible.
                                           pptpCreditsEntry 1.3.6.1.4.1.272.4.23.4.1 no-access
                                               pptpCreditsSubsysNumber 1.3.6.1.4.1.272.4.23.4.1.1 integer read-only
Type of Subsystem. Enumeration: 'ppp': 1, 'any': 2.
                                               pptpCreditsSurveillance 1.3.6.1.4.1.272.4.23.4.1.2 integer read-write
Surveillance on or off. Enumeration: 'on': 2, 'off': 1.
                                               pptpCreditsMeasuretime 1.3.6.1.4.1.272.4.23.4.1.3 integer read-write
Time of one observation interval in seconds.
                                               pptpCreditsMaxInCon 1.3.6.1.4.1.272.4.23.4.1.4 integer read-write
Maximum number of allowed incoming connections during the observation interval. -1 disables this limit.
                                               pptpCreditsMaxOutCon 1.3.6.1.4.1.272.4.23.4.1.5 integer read-write
Maximum number of allowed outgoing connections during the observation interval. -1 disables this limit.
                                               pptpCreditsMaxInDuration 1.3.6.1.4.1.272.4.23.4.1.6 integer read-write
Maximum connect time for incoming connections in seconds during the observation interval. -1 disables this limit.
                                               pptpCreditsMaxOutDuration 1.3.6.1.4.1.272.4.23.4.1.7 integer read-write
Maximum connect time for outgoing connections in seconds during the observation interval. -1 disables this limit
                                               pptpCreditsTimeleft 1.3.6.1.4.1.272.4.23.4.1.8 integer read-write
Time in seconds left in current interval. Writing to Timeleft will restart the observation interval.
                                               pptpCreditsCurrentInCon 1.3.6.1.4.1.272.4.23.4.1.9 integer read-only
Current number of incoming connections.
                                               pptpCreditsCurrentOutCon 1.3.6.1.4.1.272.4.23.4.1.10 integer read-only
Current number of outgoing connections.
                                               pptpCreditsTotalInCon 1.3.6.1.4.1.272.4.23.4.1.11 integer read-only
Total count of incoming connections during the observation interval.
                                               pptpCreditsTotalOutCon 1.3.6.1.4.1.272.4.23.4.1.12 integer read-only
Total count of outgoing connections during the observation interval.
                                               pptpCreditsTotalMaxCon 1.3.6.1.4.1.272.4.23.4.1.13 integer read-only
Maximum number of simultaniously established connections during the observation interval.
                                               pptpCreditsTotalInDuration 1.3.6.1.4.1.272.4.23.4.1.14 integer read-only
Total connect time of incoming connections during the observation interval.
                                               pptpCreditsTotalOutDuration 1.3.6.1.4.1.272.4.23.4.1.15 integer read-only
Total connect time of outgoing connections during the observation interval.
                                               pptpCreditsMaxCurrentInCon 1.3.6.1.4.1.272.4.23.4.1.16 integer read-write
Maximum number of currently allowed incoming connections. -1 disables this limit.
                                               pptpCreditsMaxCurrentOutCon 1.3.6.1.4.1.272.4.23.4.1.17 integer read-write
Maximum number of currently allowed outgoing connections. -1 disables this limit.
                                               pptpCreditsMaxCurrentCon 1.3.6.1.4.1.272.4.23.4.1.18 integer read-write
Maximum number of currently allowed connections in both directions. -1 disables this limit.