BIANCA-BRICK-L2TP-MIB: View SNMP OID List / Download MIB

VENDOR: BINTEC COMMUNICATIONS GMBH


 Home MIB: BIANCA-BRICK-L2TP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, RFC1158-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 bintec 1.3.6.1.4.1.272
         bibo 1.3.6.1.4.1.272.4
             vpn 1.3.6.1.4.1.272.4.23
                   l2tp 1.3.6.1.4.1.272.4.23.8
                       l2tpGlobals 1.3.6.1.4.1.272.4.23.8.10
                             l2tpGlobUdpPort 1.3.6.1.4.1.272.4.23.8.10.10 integer read-write
The UDP port which is monitored by L2TP for tunnel establishment requests received from remote hosts.
                             l2tpGlobPortUsage 1.3.6.1.4.1.272.4.23.8.10.20 integer read-write
This object specifies whether L2TP uses only one UDP port (which number is defined by l2tpGlobUdpPort), or if it allocates a new available port, to send messages to the remote equipment. Choosing 'single' makes it sometimes easier to process L2TP through NAT since L2TP traffic can be classified based on the UDP port number. Choosing 'floating' selects the behavior which is recommended in RFC2331. Possible values: single(1), -- L2TP uses the UDP port defined by l2tpGlobUdpPort -- to send messages to the remote equipment. floating(2) -- L2TP allocates a new port to send messages to -- the remote equipment (default). Enumeration: 'single': 1, 'floating': 2.
                       l2tpTunnelProfileTable 1.3.6.1.4.1.272.4.23.8.20 no-access
This table contains profile information for L2TP tunnels.
                             l2tpTunnelProfileEntry 1.3.6.1.4.1.272.4.23.8.20.10 no-access
An entry in the l2tpTunnelProfileTable.
                                   l2tpTunnelProfileIndex 1.3.6.1.4.1.272.4.23.8.20.10.10 integer read-write
The unique index for this entry.
                                   l2tpTunnelProfileName 1.3.6.1.4.1.272.4.23.8.20.10.15 displaystring read-write
The friendly name for this entry.
                                   l2tpTunnelProfileRemoteIpAddress 1.3.6.1.4.1.272.4.23.8.20.10.20 ipaddress read-write
The main remote IP address for the tunnel. Only meaningful in LAC mode. If l2tpTunnelProfileRadiusAssignment is set to 'enabled', this object is ignored and the L2TP daemon will ask the Radius daemon to send a request for the main and backup remote IP addresses.
                                   l2tpTunnelProfileRemoteIpAddressBackup 1.3.6.1.4.1.272.4.23.8.20.10.25 ipaddress read-write
The backup remote IP address for the tunnel. Only meaningful in LAC mode. If l2tpTunnelProfileRadiusAssignment is set to 'enabled', this object is ignored and the L2TP daemon will ask the Radius daemon to send a request for the main and backup remote IP addresses.
                                   l2tpTunnelProfileRemoteUdpPort 1.3.6.1.4.1.272.4.23.8.20.10.30 integer read-write
The remote UDP port number for the tunnel. Only meaningful in LAC mode.
                                   l2tpTunnelProfileRemoteHostname 1.3.6.1.4.1.272.4.23.8.20.10.40 displaystring read-write
The name of the remote host. Use an empty string for default profile.
                                   l2tpTunnelProfileLocalIpAddress 1.3.6.1.4.1.272.4.23.8.20.10.50 ipaddress read-write
The local IP address for the tunnel. If this value is set to 0, the IP address of the egress interface will be used in outgoing L2TP packets.
                                   l2tpTunnelProfileLocalUdpPort 1.3.6.1.4.1.272.4.23.8.20.10.60 integer read-write
The local UDP port number for the tunnel. Only meaningful in LAC mode. If this value is set to 0 (zero), the port number is allocated dynamically.
                                   l2tpTunnelProfileLocalHostname 1.3.6.1.4.1.272.4.23.8.20.10.70 displaystring read-write
The name of the local host.
                                   l2tpTunnelProfilePassword 1.3.6.1.4.1.272.4.23.8.20.10.80 displaystring read-write
The password used for tunnel authentication.
                                   l2tpTunnelProfileReceiveWindowSize 1.3.6.1.4.1.272.4.23.8.20.10.90 integer read-write
The received window size used by L2TP on the local side of this tunnel. Currently, the only supported value is 1.
                                   l2tpTunnelProfileHelloInterval 1.3.6.1.4.1.272.4.23.8.20.10.100 integer read-write
The interval in seconds between two consecutive hello requests sent by L2TP during the tunnel life. If this object is set to 0 (zero), no hello requests are sent by L2TP on this tunnel.
                                   l2tpTunnelProfileSessionDataSequencing 1.3.6.1.4.1.272.4.23.8.20.10.110 integer read-write
This object specifies if sequence numbers are used on the data channel of sessions supported by this tunnel. Additionally, if this object is set to delete (1), the entry is marked for discard. Enumeration: 'disabled': 2, 'enabled': 3, 'delete': 1.
                                   l2tpTunnelProfileMinRetryTime 1.3.6.1.4.1.272.4.23.8.20.10.120 integer read-write
The initial interval in seconds between two consecutive attempts to send an L2TP control packet. The value of this interval is doubled with each new attempt, until the maximum value defined in l2tpTunnelProfileMaxRetryTime is reached.
                                   l2tpTunnelProfileMaxRetryTime 1.3.6.1.4.1.272.4.23.8.20.10.130 integer read-write
The maximum interval in seconds between two consecutive attempts to send an L2TP control packet.
                                   l2tpTunnelProfileMaxRetries 1.3.6.1.4.1.272.4.23.8.20.10.140 integer read-write
The maximum number of retries to send an L2TP control packet. The total number of attempts will be one more than this value.
                                   l2tpTunnelProfileRadiusAssignment 1.3.6.1.4.1.272.4.23.8.20.10.150 integer read-write
This object enables/disables the use of Radius for requesting main and backup remote IP addresses. Only meaningful in LAC mode. Enumeration: 'disabled': 1, 'enabled': 2.
                                   l2tpTunnelProfileRadiusGroupId 1.3.6.1.4.1.272.4.23.8.20.10.160 integer read-write
Determines the logical RADIUS server group to be addressed for sending the RADIUS Access-Request messages. Only meaningful in LAC mode. See also radiusSrvGroupId.
                       l2tpTunnelTable 1.3.6.1.4.1.272.4.23.8.30 no-access
This table contains information for L2TP tunnels.
                             l2tpTunnelEntry 1.3.6.1.4.1.272.4.23.8.30.10 no-access
Entries in this table are created by the system.
                                   l2tpTunnelRemoteIpAddress 1.3.6.1.4.1.272.4.23.8.30.10.10 ipaddress read-only
The remote IP address for the tunnel.
                                   l2tpTunnelRemoteUdpPort 1.3.6.1.4.1.272.4.23.8.30.10.20 integer read-only
The remote UDP port number for the tunnel.
                                   l2tpTunnelRemoteTunnelId 1.3.6.1.4.1.272.4.23.8.30.10.30 integer read-only
The ID used by the remote end for the tunnel.
                                   l2tpTunnelRemoteReceiveWindowSize 1.3.6.1.4.1.272.4.23.8.30.10.35 integer read-only
The receive window size used by L2TP on the remote side of this tunnel.
                                   l2tpTunnelRemoteHostname 1.3.6.1.4.1.272.4.23.8.30.10.40 displaystring read-only
The name of the remote host.
                                   l2tpTunnelRemoteVendorName 1.3.6.1.4.1.272.4.23.8.30.10.50 displaystring read-only
The vendor name of the remote host L2TP layer.
                                   l2tpTunnelLocalIpAddress 1.3.6.1.4.1.272.4.23.8.30.10.60 ipaddress read-only
The local IP address for the tunnel.
                                   l2tpTunnelLocalUdpPort 1.3.6.1.4.1.272.4.23.8.30.10.70 integer read-only
The local UDP port number for the tunnel.
                                   l2tpTunnelLocalTunnelId 1.3.6.1.4.1.272.4.23.8.30.10.80 integer read-only
The ID used by the local end for the tunnel.
                                   l2tpTunnelLocalReceiveWindowSize 1.3.6.1.4.1.272.4.23.8.30.10.85 integer read-only
The receive window size used by L2TP on the local side of this tunnel. Currently, the only supported value is 1.
                                   l2tpTunnelLocalHostname 1.3.6.1.4.1.272.4.23.8.30.10.90 displaystring read-only
The name of the local host.
                                   l2tpTunnelPassword 1.3.6.1.4.1.272.4.23.8.30.10.100 displaystring read-only
The password used for tunnel authentication.
                                   l2tpTunnelHelloInterval 1.3.6.1.4.1.272.4.23.8.30.10.120 integer read-write
The interval in seconds between two consecutive hello requests sent by L2TP during the tunnel life. If this object is set to 0 (zero), no hello requests are sent by L2TP on this tunnel.
                                   l2tpTunnelSessionDataSequencing 1.3.6.1.4.1.272.4.23.8.30.10.130 integer read-write
This object specifies if sequence numbers are used on the data channel of sessions supported by this tunnel. Enumeration: 'disabled': 2, 'enabled': 3.
                                   l2tpTunnelMinRetryTime 1.3.6.1.4.1.272.4.23.8.30.10.140 integer read-write
The initial interval in seconds between two consecutive attempts to send an L2TP control packet. The value of this interval is doubled with each new attempt, until the maximum value defined in l2tpTunnelProfileMaxRetryTime is reached.
                                   l2tpTunnelMaxRetryTime 1.3.6.1.4.1.272.4.23.8.30.10.150 integer read-write
The maximum interval in seconds between two consecutive attempts to send an L2TP control packet.
                                   l2tpTunnelMaxRetries 1.3.6.1.4.1.272.4.23.8.30.10.160 integer read-write
The maximum number of retries to send an L2TP control packet. The total number of attempts will be one more than this value.
                                   l2tpTunnelState 1.3.6.1.4.1.272.4.23.8.30.10.170 integer read-write
The current state of the tunnel as specified in RFC2661. Selecting shutdown(5) value results in tunnel hangup. Any other value is ignored. Enumeration: 'established': 4, 'idle': 1, 'waitctlreply': 2, 'shutdown': 5, 'waitctlconn': 3.
                       l2tpSessionTable 1.3.6.1.4.1.272.4.23.8.40 no-access
This Table contains information for L2TP sessions.
                             l2tpSessionEntry 1.3.6.1.4.1.272.4.23.8.40.10 no-access
Entries in this table are created by the system.
                                   l2tpSessionRemoteIpAddress 1.3.6.1.4.1.272.4.23.8.40.10.10 ipaddress read-only
The remote IP address for the tunnel.
                                   l2tpSessionRemoteUdpPort 1.3.6.1.4.1.272.4.23.8.40.10.20 integer read-only
The remote UDP port number for the tunnel.
                                   l2tpSessionRemoteTunnelId 1.3.6.1.4.1.272.4.23.8.40.10.30 integer read-only
The ID used by the remote end for the tunnel.
                                   l2tpSessionRemoteSessionId 1.3.6.1.4.1.272.4.23.8.40.10.40 integer read-only
The ID used by the remote end for the session.
                                   l2tpSessionRemoteHostname 1.3.6.1.4.1.272.4.23.8.40.10.50 displaystring read-only
The name of the remote host.
                                   l2tpSessionLocalIpAddress 1.3.6.1.4.1.272.4.23.8.40.10.60 ipaddress read-only
The local IP address for the tunnel.
                                   l2tpSessionLocalUdpPort 1.3.6.1.4.1.272.4.23.8.40.10.70 integer read-only
The local UDP port number for the tunnel.
                                   l2tpSessionLocalTunnelId 1.3.6.1.4.1.272.4.23.8.40.10.80 integer read-only
The ID used by the local end for the tunnel.
                                   l2tpSessionLocalSessionId 1.3.6.1.4.1.272.4.23.8.40.10.90 integer read-only
The ID used by the local end for the session.
                                   l2tpSessionLocalHostname 1.3.6.1.4.1.272.4.23.8.40.10.100 displaystring read-only
The name of the local host.
                                   l2tpSessionCallSerialNumber 1.3.6.1.4.1.272.4.23.8.40.10.110 integer read-only
The call serial number for the session.
                                   l2tpSessionDataSequencing 1.3.6.1.4.1.272.4.23.8.40.10.120 integer read-write
This object specifies if sequence numbers are used on the data channel of the session. Enumeration: 'disabled': 2, 'enabled': 3.
                                   l2tpSessionState 1.3.6.1.4.1.272.4.23.8.40.10.130 integer read-write
The current state of the session as specified in RFC2661. Selecting shutdown(7) value results in session hangup. Any other value is ignored. Enumeration: 'waitreply': 4, 'established': 6, 'waittunnel': 2, 'waitconnect': 5, 'waitcsanswer': 3, 'idle': 1, 'shutdown': 7.
                                   l2tpSessionInfo 1.3.6.1.4.1.272.4.23.8.40.10.140 displaystring read-only
Info on the state of the session.
                                   l2tpSessionClientPPPCrcErrors 1.3.6.1.4.1.272.4.23.8.40.10.150 integer read-only
The number of PPP CRC errors detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode.
                                   l2tpSessionClientPPPFramingErrors 1.3.6.1.4.1.272.4.23.8.40.10.160 integer read-only
The number of PPP framing errors detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode.
                                   l2tpSessionClientPPPHardwareOverruns 1.3.6.1.4.1.272.4.23.8.40.10.170 integer read-only
The number of PPP hardware overruns detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode.
                                   l2tpSessionClientPPPBufferOverruns 1.3.6.1.4.1.272.4.23.8.40.10.180 integer read-only
The number of PPP buffer overruns detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode.
                                   l2tpSessionClientPPPTimeoutErrors 1.3.6.1.4.1.272.4.23.8.40.10.190 integer read-only
The number of PPP timeout errors detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode.
                                   l2tpSessionClientPPPAlignmentErrors 1.3.6.1.4.1.272.4.23.8.40.10.200 integer read-only
The number of PPP alignment errors detected by the LAC while communicating with the PPP client. This value is only significant in L2TP-LNS mode.