BENU-WAG-STATS-MIB: View SNMP OID List / Download MIB

VENDOR: BENU NETWORKS


 Home MIB: BENU-WAG-STATS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, BENU-WAG-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 benuWagStatsMIB 1.3.6.1.4.1.39406.2.1.3
This MIB module defines statistics of Benu Wireless Access Gateway. Copyright (C) 2012 by Benu Networks, Inc. All rights reserved.
     bWagStatsNotifications 1.3.6.1.4.1.39406.2.1.3.0
WAG stats notifications are defined in this branch.
         bWagCgnatAuthIpAddrHighThresholdReached 1.3.6.1.4.1.39406.2.1.3.0.1
This notification signifies that the current number of used authenticated CGNAT IP addresses has risen above the value of bWagCgnatAuthIpAddrUsedHighThreshold.
         bWagCgnatAuthIpAddrLowThresholdReached 1.3.6.1.4.1.39406.2.1.3.0.2
This notification signifies that the current number of used authenticated CGNAT IP addresses has fallen below the value of bWagCgnatAuthIpAddrUsedLowThreshold.
         bWagCgnatAuthIpAddressesExhausted 1.3.6.1.4.1.39406.2.1.3.0.3
This notification signifies that the current number of used authenticated CGNAT IP addresses are exhausted from pool group
         bWagCgnatPortBlocksUsedHighThresholdReached 1.3.6.1.4.1.39406.2.1.3.0.4
This notification signifies that the current number of used CGNAT port blocks used for an authenticated subscriber has risen above the value of bWagCgnatPortBlocksUsedHighThreshold.
         bWagCgnatPortBlocksUsedLowThresholdReached 1.3.6.1.4.1.39406.2.1.3.0.5
This notification signifies that the current number of used CGNAT Port blocks for an authenticated subscriber has fallen below the value of bWagCgnatPortBlocksUsedLowThreshold.
         bWagDhcpTPSHighReached 1.3.6.1.4.1.39406.2.1.3.0.6
This notification signifies that the total number of DHCP transactions for the particular interval has risen above the value bWagDhcpTPSHigh.
         bWagDhcpTPSLowReached 1.3.6.1.4.1.39406.2.1.3.0.7
This notification signifies that the total number of DHCP transactions for the particular interval has fallen below the value bWagDhcpTPSLow.
         bWagVrgApiIpAddrUsedHighThresholdReached 1.3.6.1.4.1.39406.2.1.3.0.8
This notification signifies that the current number of used IP addresses for VRGAPI subscribers has risen above the value of bWagVrgApiIpAddrUsedHighThreshold.
         bWagVrgApiIpAddrUsedLowThresholdReached 1.3.6.1.4.1.39406.2.1.3.0.9
This notification signifies that the current number of used IP addresses for VRGAPI subscribers has fallen below the value of bWagVrgApiIpAddrUsedLowThreshold.
         bWagVrgApiIpAddressesExhausted 1.3.6.1.4.1.39406.2.1.3.0.10
This notification signifies that the current number of used IP addresses VRGApisubscribers are exhausted from pool group
     bWagRadiusMIBObjects 1.3.6.1.4.1.39406.2.1.3.1
WAG RADIUS statistics are defined in this branch.
         bWagRadiusTable 1.3.6.1.4.1.39406.2.1.3.1.1 no-access
A list of RADIUS statistics.
             bWagRadiusEntry 1.3.6.1.4.1.39406.2.1.3.1.1.1 no-access
A logical row in the bWagRadiusTable.
                 bWagRadiusStatsInterval 1.3.6.1.4.1.39406.2.1.3.1.1.1.1 integer32 no-access
The interval where the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i
                 bWagRadiusIntervalDuration 1.3.6.1.4.1.39406.2.1.3.1.1.1.2 integer32 read-only
Duration of stats interval in minutes
                 bWagRadiusAuthLatencyMin 1.3.6.1.4.1.39406.2.1.3.1.1.1.3 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all Access-Request message(s) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Access-Accept/Reject message(s) received by the Client Proxy. The value is in microseconds.
                 bWagRadiusAuthLatencyMax 1.3.6.1.4.1.39406.2.1.3.1.1.1.4 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all Access-Request message(s) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Access-Accept/Reject message(s) received by the Client Proxy. The value is in microseconds.
                 bWagRadiusAuthLatencyAvg 1.3.6.1.4.1.39406.2.1.3.1.1.1.5 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all Access-Request message(s) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Access-Accept/Reject message(s) received by the Client Proxy. The value is in microseconds.
                 bWagRadiusAuthLatencyLast 1.3.6.1.4.1.39406.2.1.3.1.1.1.6 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent Access-Request message(s) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Access-Accept/Reject message(s) received by the Client Proxy. The value is in microseconds.
                 bWagRadiusAcctLatencyMin 1.3.6.1.4.1.39406.2.1.3.1.1.1.7 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all Accounting-Request message(s) (Start/Interim Update/Stop) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Accounting-Response message received by the Client Proxy. The value is in microseconds.
                 bWagRadiusAcctLatencyMax 1.3.6.1.4.1.39406.2.1.3.1.1.1.8 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all Accounting-Request message(s) (Start/Interim Update/Stop) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Accounting-Response message(s) received by the Client Proxy. The value is in microseconds.
                 bWagRadiusAcctLatencyAvg 1.3.6.1.4.1.39406.2.1.3.1.1.1.9 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all Accounting-Request message(s) (Start/Interim Update/Stop) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Accounting-Response message(s) received by the Client Proxy. The value is in microseconds.
                 bWagRadiusAcctLatencyLast 1.3.6.1.4.1.39406.2.1.3.1.1.1.10 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent Accounting-Request message (Start/Interim Update/Stop) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Accounting-Response message(s) received by the Client Proxy. The value is in microseconds.
                 bWagRadiusAccessRequestSent 1.3.6.1.4.1.39406.2.1.3.1.1.1.11 unsigned32 read-only
The count of the total number of Access-Request message(s) sent during the reporting period.
                 bWagRadiusAccessAcceptReceived 1.3.6.1.4.1.39406.2.1.3.1.1.1.12 unsigned32 read-only
The count of the total number of Access-Accept message(s) received during the reporting period.
                 bWagRadiusAccessRejectReceived 1.3.6.1.4.1.39406.2.1.3.1.1.1.13 unsigned32 read-only
The count of the total number of Access-Reject message(s) received during the reporting period.
                 bWagRadiusAcctRequestSent 1.3.6.1.4.1.39406.2.1.3.1.1.1.14 unsigned32 read-only
The count of the total number of Accounting-Request message(s) sent during the reporting period.
                 bWagRadiusAcctResponseReceived 1.3.6.1.4.1.39406.2.1.3.1.1.1.15 unsigned32 read-only
The count of the total number of Accounting-Response message(s) received during the reporting period.
                 bWagRadiusCoAAckSent 1.3.6.1.4.1.39406.2.1.3.1.1.1.16 unsigned32 read-only
The count of the total number of CoA-Ack message(s) sent during the reporting period.
                 bWagRadiusCoANackSent 1.3.6.1.4.1.39406.2.1.3.1.1.1.17 unsigned32 read-only
The count of the total number of CoA-Nack message(s) sent during the reporting period.
                 bWagRadiusCoARequestReceived 1.3.6.1.4.1.39406.2.1.3.1.1.1.18 unsigned32 read-only
The count of the total number of CoA-Request message(s) received during the reporting period.
                 bWagRadiusCoALatencyMin 1.3.6.1.4.1.39406.2.1.3.1.1.1.19 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all CoA-Request message(s) received from the AAA and their corresponding CoA-Ack/Nack message(s) sent by the WAG. The value is in microseconds.
                 bWagRadiusCoALatencyMax 1.3.6.1.4.1.39406.2.1.3.1.1.1.20 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all CoA-Request message(s) received from the AAA and their corresponding CoA-Ack/Nack message(s) sent by the WAG. The value is in microseconds.
                 bWagRadiusCoALatencyAvg 1.3.6.1.4.1.39406.2.1.3.1.1.1.21 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all CoA-Request message(s) received from the AAA and their corresponding CoA-Ack/Nack message(s) sent by the WAG. The value is in microseconds.
                 bWagRadiusCoALatencyLast 1.3.6.1.4.1.39406.2.1.3.1.1.1.22 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent CoA-Request message received from the AAA and its corresponding CoA-Ack/Nack message received by the WAG. The value is in microseconds.
                 bWagRadiusDMLatencyMin 1.3.6.1.4.1.39406.2.1.3.1.1.1.23 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DM message(s) received from the AAA and their corresponding DM-Ack/Nack message(s) sent by the WAG. The value is in microseconds.
                 bWagRadiusDMLatencyMax 1.3.6.1.4.1.39406.2.1.3.1.1.1.24 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DM message(s) received from the AAA and their corresponding DM Ack/Nack message(s) sent by the WAG. The value is in microseconds.
                 bWagRadiusDMLatencyAvg 1.3.6.1.4.1.39406.2.1.3.1.1.1.25 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DM message(s) received from the AAA and their corresponding DM Ack/Nack message(s) sent by the WAG. The value is in microseconds.
                 bWagRadiusDMLatencyLast 1.3.6.1.4.1.39406.2.1.3.1.1.1.26 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DM message received from the AAA and its corresponding DM Ack/Nack message received by the WAG. The value is in microseconds.
                 bWagRadiusDMAckSent 1.3.6.1.4.1.39406.2.1.3.1.1.1.27 unsigned32 read-only
The count of the total number of DM-Ack message(s) sent during the reporting period.
                 bWagRadiusDMNackSent 1.3.6.1.4.1.39406.2.1.3.1.1.1.28 unsigned32 read-only
The count of the total number of DM-Nack message(s) Sent during the reporting period.
                 bWagRadiusDMRequestReceived 1.3.6.1.4.1.39406.2.1.3.1.1.1.29 unsigned32 read-only
The count of the total number of DM-Request message(s) received during the reporting period.
     bWagRadiusNotifObjects 1.3.6.1.4.1.39406.2.1.3.2
Notifications of WAG RADIUS statistics are defined in this branch.
     bWagDhcpMIBObjects 1.3.6.1.4.1.39406.2.1.3.3
WAG DHCP statistics are defined in this branch.
         bWagDhcpTable 1.3.6.1.4.1.39406.2.1.3.3.1 no-access
A list of DHCP periodic statistics.
             bWagDhcpEntry 1.3.6.1.4.1.39406.2.1.3.3.1.1 no-access
A logical row in the bWagDhcpTable.
                 bWagDhcpStatsInterval 1.3.6.1.4.1.39406.2.1.3.3.1.1.1 integer32 no-access
The interval where the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
                 bWagDhcpIntervalDuration 1.3.6.1.4.1.39406.2.1.3.3.1.1.2 integer32 read-only
Duration of stats interval in minutes
                 bWagDhcpDiscoverAckIntervalMin 1.3.6.1.4.1.39406.2.1.3.3.1.1.3 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
                 bWagDhcpDiscoverAckIntervalMax 1.3.6.1.4.1.39406.2.1.3.3.1.1.4 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
                 bWagDhcpDiscoverAckIntervalAvg 1.3.6.1.4.1.39406.2.1.3.3.1.1.5 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
                 bWagDhcpDiscoverAckIntervalLast 1.3.6.1.4.1.39406.2.1.3.3.1.1.6 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DHCP Discover message received by the WAG and its corresponding DHCP Ack message sent by the WAG. The value is in microseconds.
                 bWagDhcpRequestAckLatencyMin 1.3.6.1.4.1.39406.2.1.3.3.1.1.7 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DHCP Request message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
                 bWagDhcpRequestAckLatencyMax 1.3.6.1.4.1.39406.2.1.3.3.1.1.8 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DHCP Request message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
                 bWagDhcpRequestAckLatencyAvg 1.3.6.1.4.1.39406.2.1.3.3.1.1.9 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DHCP Request message(s) received by the WAG and their corresponding DHCP Ack message(s) is sent by the WAG. The value is in microseconds.
                 bWagDhcpRequestAckLatencyLast 1.3.6.1.4.1.39406.2.1.3.3.1.1.10 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DHCP Request message received by the WAG and its corresponding DHCP Ack message sent by the WAG. The value is in microseconds.
                 bWagDhcpDiscoverOfferLatencyMin 1.3.6.1.4.1.39406.2.1.3.3.1.1.11 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Offer message(s) sent by the WAG. The value is in microseconds.
                 bWagDhcpDiscoverOfferLatencyMax 1.3.6.1.4.1.39406.2.1.3.3.1.1.12 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Offer message(s) sent by the WAG. The value is in microseconds.
                 bWagDhcpDiscoverOfferLatencyAvg 1.3.6.1.4.1.39406.2.1.3.3.1.1.13 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Offer message(s) sent by the WAG. The value is in microseconds.
                 bWagDhcpDiscoverOfferLatencyLast 1.3.6.1.4.1.39406.2.1.3.3.1.1.14 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DHCP Discover message received by the WAG and its corresponding DHCP Offer message sent by the WAG. The value is in microseconds.
                 bWagDhcpDiscoverReceived 1.3.6.1.4.1.39406.2.1.3.3.1.1.15 unsigned32 read-only
The count of the total number of DHCP Discover message(s) received during the reporting period.
                 bWagDhcpOfferSent 1.3.6.1.4.1.39406.2.1.3.3.1.1.16 unsigned32 read-only
The count of the total number of DHCP Offer message(s) sent during the reporting period.
                 bWagDhcpRequestReceived 1.3.6.1.4.1.39406.2.1.3.3.1.1.17 unsigned32 read-only
The count of the total number of DHCP Request message(s) received during the reporting period.
                 bWagDhcpAckSent 1.3.6.1.4.1.39406.2.1.3.3.1.1.18 unsigned32 read-only
The count of the total number of DHCP Ack message(s) sent during the reporting period.
                 bWagDhcpNackSent 1.3.6.1.4.1.39406.2.1.3.3.1.1.19 unsigned32 read-only
The count of the total number of DHCP Nack message(s) sent during the reporting period.
                 bWagDhcpOfferRequestIntervalMin 1.3.6.1.4.1.39406.2.1.3.3.1.1.20 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DHCP Offer message(s) sent by the WAG and the corresponding DHCP Request message(s) received by the WAG. The value is in microseconds.
                 bWagDhcpOfferRequestIntervalMax 1.3.6.1.4.1.39406.2.1.3.3.1.1.21 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DHCP Offer message(s) sent by the WAG and the corresponding DHCP Request message(s) received by the WAG. The value is in microseconds.
                 bWagDhcpOfferRequestIntervalAvg 1.3.6.1.4.1.39406.2.1.3.3.1.1.22 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DHCP Offer message(s) sent by the WAG and the corresponding DHCP Request message(s) received by the WAG. The value is in microseconds.
                 bWagDhcpOfferRequestIntervalLast 1.3.6.1.4.1.39406.2.1.3.3.1.1.23 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DHCP Offer message sent by the WAG and its corresponding DHCP Request message received by the WAG. The value is in microseconds.
         bWagDhcpTPSTable 1.3.6.1.4.1.39406.2.1.3.3.2 no-access
A list of DHCP TPS periodic statistics.
             bWagDhcpTPSEntry 1.3.6.1.4.1.39406.2.1.3.3.2.1 no-access
A logical row in the bWagDhcpTPSTable.
                 bWagDhcpTPSInterval 1.3.6.1.4.1.39406.2.1.3.3.2.1.1 integer32 no-access
The interval where the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
                 bWagDhcpTPSIntervalDuration 1.3.6.1.4.1.39406.2.1.3.3.2.1.2 unsigned32 read-only
Configured interval duration of DHCP transactions in seconds
                 bWagDhcpTPSLow 1.3.6.1.4.1.39406.2.1.3.3.2.1.3 unsigned32 read-only
The low value configured for the particular interval
                 bWagDhcpTPSHigh 1.3.6.1.4.1.39406.2.1.3.3.2.1.4 unsigned32 read-only
The high value configured for the particular interval
                 bWagDhcpTPS 1.3.6.1.4.1.39406.2.1.3.3.2.1.5 unsigned32 read-only
Total number of DHCP transactions for the DHCP tps interval
     bWagDhcpNotifObjects 1.3.6.1.4.1.39406.2.1.3.4
Notifications of WAG DHCP statistics are defined in this branch.
     bWagSubscriberMIBObjects 1.3.6.1.4.1.39406.2.1.3.5
WAG subscriber statistics are defined in this branch.
         bWagSubscriberTable 1.3.6.1.4.1.39406.2.1.3.5.1 no-access
A list of WAG subscriber statistics.
             bWagSubscriberEntry 1.3.6.1.4.1.39406.2.1.3.5.1.1 no-access
A logical row in the bWagSubscriberTable.
                 bWagSubscriberStatsInterval 1.3.6.1.4.1.39406.2.1.3.5.1.1.1 integer32 no-access
The interval for acculating the measurements. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data, greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
                 bWagSubscriberIntervalDuration 1.3.6.1.4.1.39406.2.1.3.5.1.1.2 integer32 read-only
Duration of statistics interval (or reporting period) in minutes
                 bWagSubscriberActivationsCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.3 unsigned32 read-only
The total number of subscriber activations during the reporting period. This includes all subscriber attaches into the WAG system. For example, if a subscriber attaches and then detaches and attaches again, it will be considered as 2 activations.
                 bWagSubscriberDeletionsCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.4 unsigned32 read-only
The total number of subscriber deletions during the the reporting period.
                 bWagSubscriberAuthenticationsCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.5 unsigned32 read-only
The total number of authentications during the reporting period. Includes (a) number of times pre-authenticated subscribers are admitted into the WAG, and (b) number of times subscribers have been authenticated via captive portal. Note 1: A pre-authenticated subscriber is one for whom a captive portal URL is not received in the RADIUS Access-Accept message. Note 2: Multiple successful authentications for the same subscriber are counted independent of each other.
                 bWagSubscriberRedirectionsCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.6 unsigned32 read-only
The total number of subscriber redirections to the captive portal during the reporting period. One subscriber can contribute multiple times this count.
                 bWagSubscriberRedirectionsByAcl 1.3.6.1.4.1.39406.2.1.3.5.1.1.7 unsigned32 read-only
The total number of redirections of authenticated subscribers due to an ACL rule during the reporting period. This count will increment for each redirection of a HTTP-GET request for an authenticated subscriber if Benu-ACL-Redirect-URL VSA was received for the subscriber
                 bWagSubscriberAPMobilityOccurencesCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.8 unsigned32 read-only
The total number of AP mobility occurences for all subscribers during the reporting period.
                 bWagSubscriberDeletionsByDMCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.9 unsigned32 read-only
The total number of subscriber deletions by Disconnect-Message during the reporting period.
                 bWagSubscriberIdleTimeoutCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.10 unsigned32 read-only
The total number of automatic subscriber deletions due to idle timeout during the reporting period.
                 bWagSubscriberSessionTimeoutPreauthCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.11 unsigned32 read-only
The total number of automatic deletions due to session timeout of pre-authenticated subscribers during the reporting period.
                 bWagSubscriberSessionTimeoutAuthviaportalCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.12 unsigned32 read-only
The total number of automatic deletions due to session timeout of subscribers that were authenticated via captive portal during the reporting period.
                 bWagSubscriberDroppedByLicenseManagerCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.13 unsigned32 read-only
The total number of subscriber attach attempts that are dropped due to license restrictions during the reporting period.
                 bWagSubscriberThrottlingOccurrencesCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.14 unsigned32 read-only
The total number of times an attempt by any subscriber to reach the captive portal was throttled during the reporting period.
                 bWagSubscriberThrottledCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.15 unsigned32 read-only
The number of subscribers whose attempt to reach the captive portal was throttled during the reporting period.
                 bWagSubscriberAbsoluteTimeoutCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.16 unsigned32 read-only
The total number of automatic subscriber deletions due to absolute timeout during the reporting period.
                 bWagSubscriberAuthsViaPortalCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.17 unsigned32 read-only
The total number of authentications via captive portal during the reporting period.
                 bWagSubscriberAuthenticationsCountVia8021x 1.3.6.1.4.1.39406.2.1.3.5.1.1.18 unsigned32 read-only
The total number of authentications via 802.1x during the reporting period.
                 bWagSubscriberAuthenticationsCountViaSingleStatic 1.3.6.1.4.1.39406.2.1.3.5.1.1.19 unsigned32 read-only
The total number of authentications via B2B Single Static during the reporting period.
                 bWagSubscriberAuthenticationsCountViaRoutedSubnet 1.3.6.1.4.1.39406.2.1.3.5.1.1.20 unsigned32 read-only
The total number of authentications via B2B Routed Subnet during the reporting period.
                 bWagSubscriberSessionTimeoutAuthVia8021x 1.3.6.1.4.1.39406.2.1.3.5.1.1.21 unsigned32 read-only
The total number of automatic deletions due to session timeout of subscribers that were authenticated via 802.1x during the reporting period.
                 bWagSubscriberHomeTotalSubsDeleted 1.3.6.1.4.1.39406.2.1.3.5.1.1.22 unsigned32 read-only
The total number of home subscriber deletions during the the reporting period.
                 bWagSubscriberHomeTransientSubsDeleted 1.3.6.1.4.1.39406.2.1.3.5.1.1.23 unsigned32 read-only
The total number of home transient subscriber deletions during the the reporting period.
                 bWagSubscriberHomeUserStaticSubsDeleted 1.3.6.1.4.1.39406.2.1.3.5.1.1.24 unsigned32 read-only
The total number of home user static subscriber deletions during the the reporting period.
                 bWagSubscriberHomeDhcpStaticSubsDeleted 1.3.6.1.4.1.39406.2.1.3.5.1.1.25 unsigned32 read-only
The total number of home dhcp static subscriber deletions during the the reporting period.
                 bWagSubscriberHomeDhcpDynSubsDeleted 1.3.6.1.4.1.39406.2.1.3.5.1.1.26 unsigned32 read-only
The total number of home dhcp dynamic subscriber deletions during the the reporting period.
                 bWagSubscriberHomePubStaticSubsDeleted 1.3.6.1.4.1.39406.2.1.3.5.1.1.27 unsigned32 read-only
The total number of home public subscriber deletions during the the reporting period.
                 bWagSubscriberSpWifiActivationsCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.28 unsigned32 read-only
The total number of Spwifi subscriber activations during the reporting period. This includes all Spwifi subscriber attaches into the WAG system. For example, if a subscriber attaches and then detaches and attaches again, it will be considered as 2 activations.
                 bWagSubscriberHomeActivationsCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.29 unsigned32 read-only
The total number of Home subscriber activations during the reporting period. This includes all Home subscriber attaches into the WAG system. For example, if a subscriber attaches and then detaches and attaches again, it will be considered as 2 activations.
                 bWagSubscriberDsLiteActivationsCount 1.3.6.1.4.1.39406.2.1.3.5.1.1.30 unsigned32 read-only
The total number of DSLite subscriber activations during the reporting period. This includes all DSLite subscriber attaches into the WAG system. For example, if a subscriber attaches and then detaches and attaches again, it will be considered as 2 activations.
         bWagNumCurrentSubscribers 1.3.6.1.4.1.39406.2.1.3.5.2 unsigned32 read-only
The current number of subscribers. This count includes authenticated, unauthenticated, and home subscribers.
         bWagNumAuthenticatedSubscribers 1.3.6.1.4.1.39406.2.1.3.5.3 unsigned32 read-only
The total number of authenticated subscribers.
         bWagNumUnauthenticatedSubscribers 1.3.6.1.4.1.39406.2.1.3.5.4 unsigned32 read-only
The total number of unauthenticated subscribers.
         bWagNumSubsWithPrivateIPAddress 1.3.6.1.4.1.39406.2.1.3.5.5 unsigned32 read-only
The total number of subscribers with private IP address.
         bWagNumAuthSubsWithPublicIPAddress 1.3.6.1.4.1.39406.2.1.3.5.6 unsigned32 read-only
The total number of authenticated subscribers with public IP address.
         bWagNumUnAuthSubsWithPublicIPAddress 1.3.6.1.4.1.39406.2.1.3.5.7 unsigned32 read-only
The total number of un authenticated subscribers with public IP address.
         bWagNumMigrantSubscribersCount 1.3.6.1.4.1.39406.2.1.3.5.8 unsigned32 read-only
The count of the total number of migrant subscribers. All subscribers start out as migrant subscribers until an attempt is made to get authenticated.
         bWagNumRedirectedSubscribersCount 1.3.6.1.4.1.39406.2.1.3.5.9 unsigned32 read-only
The count of the total number of subscribers redirected to captive portal.
         bWagPolicyTable 1.3.6.1.4.1.39406.2.1.3.5.10 no-access
A list of policies and the relevant subscription data
               bWagPolicyEntry 1.3.6.1.4.1.39406.2.1.3.5.10.1 no-access
A logical row in the bWagPolicyTable.
                   bWagPolicyType 1.3.6.1.4.1.39406.2.1.3.5.10.1.1 integer no-access
This object is used to identify the type of policy. Enumeration: 'none': 0, 'acl': 3, 'qos': 1, 'li': 2.
                   bWagPolicyIndex 1.3.6.1.4.1.39406.2.1.3.5.10.1.2 integer32 no-access
A number uniquely identifying the policy.
                   bWagPolicyName 1.3.6.1.4.1.39406.2.1.3.5.10.1.3 displaystring read-only
Name of the policy.
                   bWagNumOfSubscribersWithPolicy 1.3.6.1.4.1.39406.2.1.3.5.10.1.4 unsigned32 read-only
Total number subscribed to the policy.
                   bWagNumOfAuthSubscribersWithPolicy 1.3.6.1.4.1.39406.2.1.3.5.10.1.5 unsigned32 read-only
Total number of authenticated subscribers subscribed to the policy.
                   bWagNumOfUnAuthSubscribersWithPolicy 1.3.6.1.4.1.39406.2.1.3.5.10.1.6 unsigned32 read-only
Total number of unauthenticated subscribers subscribed to the policy.
         bWagNumSubsAuthenticatedWithIPv6Prefix 1.3.6.1.4.1.39406.2.1.3.5.11 unsigned32 read-only
The total number of authenticated subscribers with IPv6 prefix.
         bWagNumCurrent8021xSubscribers 1.3.6.1.4.1.39406.2.1.3.5.12 unsigned32 read-only
The current number of 802.1x subscribers.
         bWagNumPreAuthenticatedSubscribers 1.3.6.1.4.1.39406.2.1.3.5.13 unsigned32 read-only
The total number of pre-authenticated subscribers.
         bWagNumCurrentSingleStaticSubscribers 1.3.6.1.4.1.39406.2.1.3.5.14 unsigned32 read-only
The current number of Single Static subscribers.
         bWagNumCurrentRoutedSubnetSubscribers 1.3.6.1.4.1.39406.2.1.3.5.15 unsigned32 read-only
The current number of Routed Subnet subscribers.
         bWagNumSubsUnauthenticatedWithIPv6Prefix 1.3.6.1.4.1.39406.2.1.3.5.16 unsigned32 read-only
The total number of unauthenticated subscribers with IPv6 prefix.
         bWagNumSubsViaStaticAuthPolicy 1.3.6.1.4.1.39406.2.1.3.5.17 unsigned32 read-only
The total number of subscribers with static portal authentication policy.
         bWagNumCurrentHomeSubscribers 1.3.6.1.4.1.39406.2.1.3.5.18 unsigned32 read-only
The current number of home subscribers.
         bWagNumCurrentSPWiFiSubscribers 1.3.6.1.4.1.39406.2.1.3.5.19 unsigned32 read-only
The current number of SP-WiFi subscribers.
         bWagNumCurrentHomeTransientSubs 1.3.6.1.4.1.39406.2.1.3.5.20 unsigned32 read-only
The current number of transient home subscribers.
         bWagNumCurrentHomeUserStatSubs 1.3.6.1.4.1.39406.2.1.3.5.21 unsigned32 read-only
The current number of user static home subscribers.
         bWagNumCurrentHomeDhcpStatSubs 1.3.6.1.4.1.39406.2.1.3.5.22 unsigned32 read-only
The current number of static DHCP home subscribers.
         bWagNumCurrentHomeDhcpDynSubs 1.3.6.1.4.1.39406.2.1.3.5.23 unsigned32 read-only
The current number of dynamic DHCP home subscribers.
         bWagNumCurrentHomePubStatSubs 1.3.6.1.4.1.39406.2.1.3.5.24 unsigned32 read-only
The current number public static home subscribers.
         bWagNumPreAuthSpwifiSubscribers 1.3.6.1.4.1.39406.2.1.3.5.25 unsigned32 read-only
The total number of pre-authenticated SPWifi subscribers.
         bWagNumPreAuthHomeSubscribers 1.3.6.1.4.1.39406.2.1.3.5.26 unsigned32 read-only
The total number of pre-authenticated Home subscribers.
         bWagNumPreAuthenticatedSubscribersS2aPmip6 1.3.6.1.4.1.39406.2.1.3.5.27 unsigned32 read-only
The total number of pre-authenticated PMIPv6 subscribers.
         bWagNumCurrentSSIDS2aSubscribersPmip6 1.3.6.1.4.1.39406.2.1.3.5.28 unsigned32 read-only
The current number of PMIPv6 subscribers.
         bWagNumCurrentDSLiteSubscribers 1.3.6.1.4.1.39406.2.1.3.5.29 unsigned32 read-only
The current number of DSLite subscribers.
     bWagSubscriberNotifObjects 1.3.6.1.4.1.39406.2.1.3.6
Notifications of WAG subscriber statistics are defined in this branch.
     bWagTunnelStatsMIBObjects 1.3.6.1.4.1.39406.2.1.3.7
WAG tunnel statistics are defined in this branch.
         bWagTunnelTable 1.3.6.1.4.1.39406.2.1.3.7.1 no-access
A list of WAG Tunnel statistics.
             bWagTunnelEntry 1.3.6.1.4.1.39406.2.1.3.7.1.1 no-access
A logical row in the bWagTunnelTable.
                 bWagTunnelStatsInterval 1.3.6.1.4.1.39406.2.1.3.7.1.1.1 integer32 no-access
The interval during which the measurements are accumulated. Interval index 1 indicates the latest interval for which statistics accumulation is completed. Older the statistics, greater the interval index value. In a system supporting a history of n intervals with interval count 1 and interval count n, the most and the least recent intervals respectively, the following apply at the end of an interval: - statistics for interval count n are discarded - the statistics for interval count i become statistics for interval count i + 1, where 1 <= i < n - current statistics become statistics for interval count 1.
                 bWagTunnelIntervalDuration 1.3.6.1.4.1.39406.2.1.3.7.1.1.2 integer32 read-only
Duration of statistics accumulation interval in minutes.
                 bWagTunnelPktsRxdGRE 1.3.6.1.4.1.39406.2.1.3.7.1.1.3 unsigned32 read-only
The total number of GRE packets received by WAGMGR over a GRE tunnel during the measurement interval.
                 bWagTunnelPktsRxdGREPayloadTEB 1.3.6.1.4.1.39406.2.1.3.7.1.1.4 unsigned32 read-only
The total number of GRE packets of protocol type Transparent Ethernet Bridging received by WAGMGR over a GRE tunnel during the measurement interval, i.e, GRE packets with protocol type field in the header set to 0x6558.
                 bWagTunnelPktsRxdGREPayloadMPLS 1.3.6.1.4.1.39406.2.1.3.7.1.1.5 unsigned32 read-only
The total number of GRE packets of protocol type Multiprotocol Label Switching received by WAGMGR over a GRE tunnel during the measurement interval, i.e, GRE packets with protocol type field in the header set to 0x8847.
                 bWagTunnelPktsEncapsulatedGRE 1.3.6.1.4.1.39406.2.1.3.7.1.1.6 unsigned32 read-only
The total number of packets encapsulated as GRE packets by the WAGMGR to be tunneled during the measurement interval.
                 bWagTunnelPktsDecapsulatedGRE 1.3.6.1.4.1.39406.2.1.3.7.1.1.7 unsigned32 read-only
The total number of packets received over a GRE tunnel that are subsequently decapsulated by the WAGMGR during the measurement interval.
                 bWagTunnelPktsRxdARP 1.3.6.1.4.1.39406.2.1.3.7.1.1.8 unsigned32 read-only
The total number of GRE-encapsulated ARP packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagTunnelPktsRxdDHCP 1.3.6.1.4.1.39406.2.1.3.7.1.1.9 unsigned32 read-only
The total number of GRE-encapsulated DHCP packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagTunnelPktsRxdDNS 1.3.6.1.4.1.39406.2.1.3.7.1.1.10 unsigned32 read-only
The total number of GRE-encapsulated DNS packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagTunnelPktsRxdHTTP 1.3.6.1.4.1.39406.2.1.3.7.1.1.11 unsigned32 read-only
The total number of GRE-encapsulated HTTP packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagTunnelPktsRxdHTTPGetReq 1.3.6.1.4.1.39406.2.1.3.7.1.1.12 unsigned32 read-only
The total number of GRE-encapsulated HTTP-GET packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagTunnelPktsTxdHTTP 1.3.6.1.4.1.39406.2.1.3.7.1.1.13 unsigned32 read-only
The total number of GRE-encapsulated HTTP packets transmitted by the WAGMGR over a tunnel during the measurement interval.
                 bWagTunnelPktsTxdHTTPRedir 1.3.6.1.4.1.39406.2.1.3.7.1.1.14 unsigned32 read-only
The total number of GRE-encapsulated HTTP packets with status code 302 transmitted by the WAGMGR over a tunnel during the measurement interval.
                 bWagTunnelPktsRxdHTTPS 1.3.6.1.4.1.39406.2.1.3.7.1.1.15 unsigned32 read-only
The total number of GRE-encapsulated HTTPS packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagTunnelPktsRxdTCPSyn 1.3.6.1.4.1.39406.2.1.3.7.1.1.16 unsigned32 read-only
The total number of GRE-encapsulated TCP SYN packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagTunnelPktsTxdTCPSynAck 1.3.6.1.4.1.39406.2.1.3.7.1.1.17 unsigned32 read-only
The total number of GRE-encapsulated TCP SYN-ACK packets transmitted by the WAGMGR over a tunnel during the measurement interval.
                 bWagTunnelPktsTxdTCPFin 1.3.6.1.4.1.39406.2.1.3.7.1.1.18 unsigned32 read-only
The total number of GRE-encapsulated TCP FIN packets transmitted by the WAGMGR over a tunnel during the measurement interval.
                 bWagTunnelPktsRxdTCPFinAck 1.3.6.1.4.1.39406.2.1.3.7.1.1.19 unsigned32 read-only
The total number of GRE-encapsulated TCP FIN/ACK packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagTunnelPktsTxdTCPAck2Fin 1.3.6.1.4.1.39406.2.1.3.7.1.1.20 unsigned32 read-only
The total number of GRE-encapsulated TCP ACK packets transmitted in response to a TCP FIN packet by the WAGMGR during the measurement interval.
                 bWagTunnelCreatedDynamically 1.3.6.1.4.1.39406.2.1.3.7.1.1.21 unsigned32 read-only
The total number of dynamically established GRE tunnels during the measurement interval.
                 bWagTunnelCreatedStatically 1.3.6.1.4.1.39406.2.1.3.7.1.1.22 unsigned32 read-only
The total number of statically established GRE tunnels during the measurement interval.
                 bWagTunnelDeleted 1.3.6.1.4.1.39406.2.1.3.7.1.1.23 unsigned32 read-only
The total number of GRE tunnels deleted during the measurement interval.
                 bWagTunnelDeletedDueToInactivity 1.3.6.1.4.1.39406.2.1.3.7.1.1.24 unsigned32 read-only
The total number of GRE tunnels deleted due to inactivity during the measurement interval.
                 bWagTunnelDeletedByCommand 1.3.6.1.4.1.39406.2.1.3.7.1.1.25 unsigned32 read-only
The total number of GRE tunnels deleted by an operator command during the measurement interval.
                 bWagTunnelMaxSupported 1.3.6.1.4.1.39406.2.1.3.7.1.1.26 unsigned32 read-only
The total number of GRE/L2TPV3 tunnels supported in WAG.
                 bWagTunnelMaxCountReached 1.3.6.1.4.1.39406.2.1.3.7.1.1.27 unsigned32 read-only
The maximum value of the total number of GRE/L2TPV3 tunnels reached during the measurement interval.
                 bWagTunnelTunnelsLookupFound 1.3.6.1.4.1.39406.2.1.3.7.1.1.28 unsigned32 read-only
The total number of successful tunnel lookup operations performed in the WAGMGR during a measurement interval.
                 bWagTunnelTunnelsLookupNotFound 1.3.6.1.4.1.39406.2.1.3.7.1.1.29 unsigned32 read-only
The total number of unsuccesful tunnel lookup operations performed in the WAGMGR during a measurement interval.
                 bWagTunnelCountHighThreshold 1.3.6.1.4.1.39406.2.1.3.7.1.1.30 unsigned32 read-only
The high threshold for the number of tunnels that are created. If no bWagTunHighThresholdReached event was previously generated, or, if a bWagTunLowThresholdReached event was previously generated, and the current count of tunnels exceeds the value of bWagTunnelCountHighThreshold, then a bWagTunHighThresholdReached event will be generated. No more bWagTunHighThresholdReached events will be generated until the value for the current count of tunnels becomes equal to or less than the value of bWagTunnelCountLowThreshold.
                 bWagTunnelCountLowThreshold 1.3.6.1.4.1.39406.2.1.3.7.1.1.31 unsigned32 read-only
The low threshold for the number of tunnels that are created. If a bWagTunHighThresholdReached event was previously generated, and, the current count of tunnels falls below the value of bWagTunnelCountLowThreshold, then a bWagTunLowThresholdReached event will be generated. No more bWagTunLowThresholdReached events will be generated until the value for the current count of tunnels becomes equal to or greater than the value of bWagTunnelCountHighThreshold.
                 bWagTunnelDeletedDueToReject 1.3.6.1.4.1.39406.2.1.3.7.1.1.32 unsigned32 read-only
The total number of GRE tunnels deleted due to AAA Reject during the measurement interval.
                 bWagTunnelDeletedDueToAbort 1.3.6.1.4.1.39406.2.1.3.7.1.1.33 unsigned32 read-only
The total number of GRE tunnels deleted due to AAA Abort during the measurement interval.
                 bWagTunnelDeletedDueToMacResFail 1.3.6.1.4.1.39406.2.1.3.7.1.1.34 unsigned32 read-only
The total number of GRE tunnels deleted due to MAC resolution failure during the measurement interval.
                 bWagTunnelDeletedDueToLifDown 1.3.6.1.4.1.39406.2.1.3.7.1.1.35 unsigned32 read-only
The total number of GRE tunnels deleted due to LIF down during the measurement interval.
                 bWagTunnelDeletedDueToB2bSubsDelete 1.3.6.1.4.1.39406.2.1.3.7.1.1.36 unsigned32 read-only
The total number of GRE tunnels deleted due to B2B subscriber delete during the measurement interval.
                 bWagL2tpv3TunnelPktsRxd 1.3.6.1.4.1.39406.2.1.3.7.1.1.37 unsigned32 read-only
The total number of L2TPV3 packets received by WAGMGR over a L2TPV3 tunnel during the measurement interval.
                 bWagL2tpv3TunnelPktsEncapsulated 1.3.6.1.4.1.39406.2.1.3.7.1.1.38 unsigned32 read-only
The total number of packets encapsulated as L2TPV3 packets by the WAGMGR to be tunneled during the measurement interval.
                 bWagL2tpv3TunnelPktsDecapsulated 1.3.6.1.4.1.39406.2.1.3.7.1.1.39 unsigned32 read-only
The total number of packets received over a L2TPV3 tunnel that are subsequently decapsulated by the WAGMGR during the measurement interval.
                 bWagL2tpv3TunnelPktsRxdARP 1.3.6.1.4.1.39406.2.1.3.7.1.1.40 unsigned32 read-only
The total number of L2TPV3-encapsulated ARP packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagL2tpv3TunnelPktsRxdDHCP 1.3.6.1.4.1.39406.2.1.3.7.1.1.41 unsigned32 read-only
The total number of L2TPV3-encapsulated DHCP packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagL2tpv3TunnelPktsRxdDNS 1.3.6.1.4.1.39406.2.1.3.7.1.1.42 unsigned32 read-only
The total number of L2TPV3-encapsulated DNS packets received over a tunnel by the WAGMGR during the measurement interval.
                 bWagL2tpv3TunnelCreatedDynamically 1.3.6.1.4.1.39406.2.1.3.7.1.1.43 unsigned32 read-only
The total number of dynamically established L2TPV3 tunnels during the measurement interval.
                 bWagL2tpv3TunnelDeleted 1.3.6.1.4.1.39406.2.1.3.7.1.1.44 unsigned32 read-only
The total number of L2TPV3 tunnels deleted during the measurement interval.
                 bWagL2tpv3TunnelDeletedDueToInactivity 1.3.6.1.4.1.39406.2.1.3.7.1.1.45 unsigned32 read-only
The total number of L2TPV3 tunnels deleted due to inactivity during the measurement interval.
                 bWagL2tpv3TunnelDeletedByCommand 1.3.6.1.4.1.39406.2.1.3.7.1.1.46 unsigned32 read-only
The total number of L2TPV3 tunnels deleted by an operator command during the measurement interval.
                 bWagL2tpv3TunnelDeletedDueToLifDown 1.3.6.1.4.1.39406.2.1.3.7.1.1.47 unsigned32 read-only
The total number of L2TPV3 tunnels deleted due to LIF down during the measurement interval.
         bWagNumCurrentTunnels 1.3.6.1.4.1.39406.2.1.3.7.2 unsigned32 read-only
The current number of tunnels.
         bWagNumTunnelsCreatedDynamically 1.3.6.1.4.1.39406.2.1.3.7.3 counter64 read-only
The total number of dynamically established GRE tunnels.
         bWagNumTunnelsCreatedStatically 1.3.6.1.4.1.39406.2.1.3.7.4 counter64 read-only
The total number of statically established GRE tunnels.
         bWagNumTunnelsDeleted 1.3.6.1.4.1.39406.2.1.3.7.5 counter64 read-only
The total number of GRE tunnels deleted.
         bWagNumTunnelsInactiveDeleted 1.3.6.1.4.1.39406.2.1.3.7.6 counter64 read-only
The total number of GRE tunnels deleted due to inactivity.
         bWagNumTunnelsDeletedByCommand 1.3.6.1.4.1.39406.2.1.3.7.7 counter64 read-only
The total number of GRE tunnels deleted by an operator command.
         bWagNumTunnelsSubsAssociated 1.3.6.1.4.1.39406.2.1.3.7.8 unsigned32 read-only
The total number of GRE tunnels with associated subscribers.
         bWagNumTunnelsSchedDeletion 1.3.6.1.4.1.39406.2.1.3.7.9 unsigned32 read-only
The total number of GRE tunnels scheduled for automatic deletion.
         bWagNumCurrentTunnelsIPv4 1.3.6.1.4.1.39406.2.1.3.7.10 unsigned32 read-only
The current number of IPv4 tunnels.
         bWagNumCurrentTunnelsIPv6 1.3.6.1.4.1.39406.2.1.3.7.11 unsigned32 read-only
The current number of IPv6 tunnels.
         bWagNumTunnelsDeletedByB2B 1.3.6.1.4.1.39406.2.1.3.7.12 counter64 read-only
The total number of GRE tunnels deleted due to B2B subscriber deletion.
         bWagNumTunnelsDeletedDuetoLIFDown 1.3.6.1.4.1.39406.2.1.3.7.13 counter64 read-only
The total number of GRE tunnels deleted due to logical interface down.
         bWagNumCurrentTunnelsSpWiFi 1.3.6.1.4.1.39406.2.1.3.7.14 unsigned32 read-only
The number of tunnels that currently serve Public Wi-Fi exclusively.
         bWagNumCurrentTunnelsHome 1.3.6.1.4.1.39406.2.1.3.7.15 unsigned32 read-only
The number of tunnels that currently serve Home exclusively.
         bWagNumCurrTunnHomeAndSpWiFi 1.3.6.1.4.1.39406.2.1.3.7.16 unsigned32 read-only
The number of tunnels that currently serve both Home and Public Wi-Fi .
         bWagNumCurrentTunnHomeInactive 1.3.6.1.4.1.39406.2.1.3.7.17 unsigned32 read-only
The current number of tunnels for Home in the INACTIVE state.
         bWagNumCurrentTunnHomeAccept 1.3.6.1.4.1.39406.2.1.3.7.18 unsigned32 read-only
The current number of tunnels for Home in the ACCEPT state.
         bWagNumL2tpv3TunnelsCreatedDynamically 1.3.6.1.4.1.39406.2.1.3.7.19 counter64 read-only
The total number of dynamically established L2TPV3 tunnels.
         bWagNumL2tpv3TunnelsDeleted 1.3.6.1.4.1.39406.2.1.3.7.20 counter64 read-only
The total number of L2TPV3 tunnels deleted.
         bWagNumL2tpv3TunnelsInactiveDeleted 1.3.6.1.4.1.39406.2.1.3.7.21 counter64 read-only
The total number of L2TPV3 tunnels deleted due to inactivity.
         bWagNumL2tpv3TunnelsDeletedByCommand 1.3.6.1.4.1.39406.2.1.3.7.22 counter64 read-only
The total number of L2TPV3 tunnels deleted by an operator command.
         bWagNumL2tpv3TunnelsSubsAssociated 1.3.6.1.4.1.39406.2.1.3.7.23 unsigned32 read-only
The total number of L2TPV3 tunnels with associated subscribers.
         bWagNumCurrentL2tpv3TunnelsIPv4 1.3.6.1.4.1.39406.2.1.3.7.24 unsigned32 read-only
The current number of IPv4 L2TPV3 tunnels.
         bWagNumL2tpv3TunnelsDeletedDuetoLIFDown 1.3.6.1.4.1.39406.2.1.3.7.25 counter64 read-only
The total number of L2TPV3 tunnels deleted due to logical interface down.
         bWagNumCurrentL2tpv3TunnelsSpWiFi 1.3.6.1.4.1.39406.2.1.3.7.26 unsigned32 read-only
The number of L2TPV3 tunnels that currently serve Public Wi-Fi exclusively.
         bWagNumCurrentTunnelsDSLite 1.3.6.1.4.1.39406.2.1.3.7.27 unsigned32 read-only
The number of tunnels that currently serve DSLite exclusively.
     bWagTunnelNotifObjects 1.3.6.1.4.1.39406.2.1.3.8
Notifications of WAG tunnel statistics are defined in this branch.
     bWagCgnatMIBObjects 1.3.6.1.4.1.39406.2.1.3.9
WAG CGNAT objects are defined in this branch.
         bWagCgnatProfileStatsTable 1.3.6.1.4.1.39406.2.1.3.9.1 no-access
A list of CGNAT statistics for profiles.
             bWagCgnatProfileStatsEntry 1.3.6.1.4.1.39406.2.1.3.9.1.1 no-access
A logical row in the bWagCgnatProfileTable.
                 bWagCgnatProfileStatsIndex 1.3.6.1.4.1.39406.2.1.3.9.1.1.1 integer32 no-access
A number uniquely identifying this CGNAT profile.
                 bWagCgnatProfileName 1.3.6.1.4.1.39406.2.1.3.9.1.1.2 displaystring read-only
The name of the CGNAT profile.
                 bWagCgnatProfileType 1.3.6.1.4.1.39406.2.1.3.9.1.1.3 displaystring read-only
The type of the CGNAT profile (AuthNapt/UnAuthNapt).
                 bWagCgnatProfileNATIPPoolGroup 1.3.6.1.4.1.39406.2.1.3.9.1.1.4 displaystring read-only
IP Pool group name associated with this profile.
                 bWagCgnatProfileSubscribers 1.3.6.1.4.1.39406.2.1.3.9.1.1.5 unsigned32 read-only
Number of authenticated subscribers currently active in this profile.
                 bWagCgnatProfileMaxIPAddresses 1.3.6.1.4.1.39406.2.1.3.9.1.1.6 unsigned32 read-only
The maximum number of public IP addresses required to fully service the configured max-subscribers for the profile. This is calculated based on three other configuration parameters: block-size, number of port blocks, and the port range, as shown below: 1. Port Range = (Upper bound - Lower bound of port numbers) + 1 2. Number of subscribers per IP = Port Range/(block-size * blocks) 3. Max IP Addresses = ceiling(max-subscribers/Number of subscribers per IP).
                 bWagCgnatProfileUsedIPAddresses 1.3.6.1.4.1.39406.2.1.3.9.1.1.7 unsigned32 read-only
Number of IP addresses in use in this profile.
                 bWagCgnatProfileReservedIPAddresses 1.3.6.1.4.1.39406.2.1.3.9.1.1.8 unsigned32 read-only
Number of IP addresses reserved in this profile.
                 bWagCgnatProfileTotalPortBlocks 1.3.6.1.4.1.39406.2.1.3.9.1.1.9 unsigned32 read-only
Number of total port blocks in this profile. This is equivalent to (max-subscribers * block-size) in this profile.
                 bWagCgnatProfilePortBlocksUsed 1.3.6.1.4.1.39406.2.1.3.9.1.1.10 unsigned32 read-only
Number of port blocks in use in this profile.
                 bWagCgnatProfilePortBlocksReused 1.3.6.1.4.1.39406.2.1.3.9.1.1.11 unsigned32 read-only
Number of port blocks reused in this profile. This value will always be reported as zero for an unauthenticated CGNAT profile.
                 bWagCgnatProfileTotalPoolIPAddresses 1.3.6.1.4.1.39406.2.1.3.9.1.1.12 unsigned32 read-only
Total number of IP addresses available in the pool.
         bWagCgnatIPStatsTable 1.3.6.1.4.1.39406.2.1.3.9.2 no-access
A list of statistics per authenticated CGNAT IP address.
             bWagCgnatIPStatsEntry 1.3.6.1.4.1.39406.2.1.3.9.2.1 no-access
A logical row in the bWagCgnatIPStatsTable.
                 bWagCgnatIPStatsIndex 1.3.6.1.4.1.39406.2.1.3.9.2.1.1 integer32 no-access
A number uniquely identifying this row in the authenticated CGNAT IP statistics table.
                 bWagCgnatPublicIPAddressType 1.3.6.1.4.1.39406.2.1.3.9.2.1.2 inetaddresstype read-only
IP Address type (IPv4 or IPv6).
                 bWagCgnatPublicIPAddress 1.3.6.1.4.1.39406.2.1.3.9.2.1.3 inetaddress read-only
Public IP address assigned to authenticated CGNAT subscribers.
                 bWagCgnatIPPortBlocksUsed 1.3.6.1.4.1.39406.2.1.3.9.2.1.4 unsigned32 read-only
Number of port blocks in use by authenticated CGNAT subscribers with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
                 bWagCgnatIPPortBlocksFree 1.3.6.1.4.1.39406.2.1.3.9.2.1.5 unsigned32 read-only
Number of port blocks for use by authenticated CGNAT subscribers with this public IP address.
                 bWagCgnatIPPortBlocksReused 1.3.6.1.4.1.39406.2.1.3.9.2.1.6 unsigned32 read-only
Number of port blocks reused by authenticated CGNAT subscribers with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
                 bWagCgnatIPSubActiveCount 1.3.6.1.4.1.39406.2.1.3.9.2.1.7 unsigned32 read-only
Number of authenticated CGNAT subscribers currently active with this public IP address.
                 bWagCgnatIPPacketsDropped 1.3.6.1.4.1.39406.2.1.3.9.2.1.8 unsigned32 read-only
Number of packets dropped due to port exhaustion for this public IP address. This value represents the sum of dropped packets for all authenticated CGNAT subscribers for whom NAT was applied with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
         bWagCgnatPeriodIpTable 1.3.6.1.4.1.39406.2.1.3.9.3 no-access
A list of periodic statistics per authenticated CGNAT public IP address including the reserved IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
             bWagCgnatPeriodIpEntry 1.3.6.1.4.1.39406.2.1.3.9.3.1 no-access
A logical row in the bWagCgnatPeriodIpTable.
                 bWagCgnatPeriodIpInterval 1.3.6.1.4.1.39406.2.1.3.9.3.1.1 integer32 no-access
The interval for acculating the measurements. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data, greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
                 bWagCgnatPeriodIpIndex 1.3.6.1.4.1.39406.2.1.3.9.3.1.2 integer32 no-access
A number uniquely identifying the authenticated CGNAT public IP address.
                 bWagCgnatIPAddressType 1.3.6.1.4.1.39406.2.1.3.9.3.1.3 inetaddresstype read-only
IP Address type (IPv4 or IPv6).
                 bWagCgnatIPAddress 1.3.6.1.4.1.39406.2.1.3.9.3.1.4 inetaddress read-only
Public IP address assigned to authenticated CGNAT subscribers including the reserved IP address.
                 bWagCgnatPacketsDropped 1.3.6.1.4.1.39406.2.1.3.9.3.1.5 unsigned32 read-only
Number of packets dropped due to port exhaustion for this public IP address in this interval. This value represents the sum of dropped packets for all authenticated CGNAT subscribers for whom NAT was applied with this public IP address in this interval.
                 bWagCgnatPortBlockMaxUtil 1.3.6.1.4.1.39406.2.1.3.9.3.1.6 unsigned32 read-only
The maximum number of port blocks that were allocated to authenticated CGNAT subscribers at any given time during the collection interval is recorded. The ratio of this value to the total number of non-reserved port blocks allocated for this public IP address is calculated and reported as percentage in this object. Units: Percentage in the range 0 - 100.
                 bWagCgnatPortBlockMinUtil 1.3.6.1.4.1.39406.2.1.3.9.3.1.7 unsigned32 read-only
The minimum number of port blocks that were allocated to authenticated CGNAT subscribers at any given time during the collection interval is recorded. The ratio of this value to the total number of non-reserved port blocks allocated for this public IP address is calculated and reported as percentage in this object. Units: Percentage in the range 0 - 100.
                 bWagCgnatIntervalDuration 1.3.6.1.4.1.39406.2.1.3.9.3.1.8 unsigned32 read-only
Duration of statistics interval in minutes.
         bWagCgnatUnauthIPStatsTable 1.3.6.1.4.1.39406.2.1.3.9.4 no-access
A list of statistics per unauthenticated CGNAT IP address.
             bWagCgnatUnauthIPStatsEntry 1.3.6.1.4.1.39406.2.1.3.9.4.1 no-access
A logical row in the bWagCgnatUnauthIPStatsTable.
                 bWagCgnatUnauthIPStatsIndex 1.3.6.1.4.1.39406.2.1.3.9.4.1.1 integer32 no-access
A number uniquely identifying this row in the unauthenticated CGNAT IP statistics table.
                 bWagCgnatUnauthPublicIPAddressType 1.3.6.1.4.1.39406.2.1.3.9.4.1.2 inetaddresstype read-only
IP Address type (IPv4 or IPv6).
                 bWagCgnatUnauthPublicIPAddress 1.3.6.1.4.1.39406.2.1.3.9.4.1.3 inetaddress read-only
Public IP address assigned to unauthenticated CGNAT subscribers.
                 bWagCgnatUnauthIPPortBlocksUsed 1.3.6.1.4.1.39406.2.1.3.9.4.1.4 unsigned32 read-only
Number of port blocks in use by unauthenticated CGNAT subscribers with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
                 bWagCgnatUnauthIPPortBlocksFree 1.3.6.1.4.1.39406.2.1.3.9.4.1.5 unsigned32 read-only
Number of port blocks for use by unauthenticated CGNAT subscribers with this public IP address.
                 bWagCgnatUnauthIPPortBlocksReused 1.3.6.1.4.1.39406.2.1.3.9.4.1.6 unsigned32 read-only
Number of port blocks reused by unauthenticated CGNAT subscribers with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
                 bWagCgnatUnauthIPSubActiveCount 1.3.6.1.4.1.39406.2.1.3.9.4.1.7 unsigned32 read-only
Number of unauthenticated CGNAT subscribers currently active with this public IP address.
         bWagCgnatUnauthPeriodIpTable 1.3.6.1.4.1.39406.2.1.3.9.5 no-access
A list of periodic statistics per unauthenicated CGNAT public IP address including the reserved IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
             bWagCgnatUnauthPeriodIpEntry 1.3.6.1.4.1.39406.2.1.3.9.5.1 no-access
A logical row in the bWagCgnatUnauthPeriodIpTable.
                 bWagCgnatUnauthPeriodIpInterval 1.3.6.1.4.1.39406.2.1.3.9.5.1.1 integer32 no-access
The interval for acculating the measurements. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data, greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
                 bWagCgnatUnauthPeriodIpIndex 1.3.6.1.4.1.39406.2.1.3.9.5.1.2 integer32 no-access
A number uniquely identifying the unauthenticated CGNAT public IP address.
                 bWagCgnatUnauthIPAddressType 1.3.6.1.4.1.39406.2.1.3.9.5.1.3 inetaddresstype read-only
IP Address type (IPv4 or IPv6).
                 bWagCgnatUnauthIPAddress 1.3.6.1.4.1.39406.2.1.3.9.5.1.4 inetaddress read-only
Public IP address assigned to unauthenticated CGNAT subscribers including the reserved IP address.
                 bWagCgnatUnauthPortBlockMaxUtil 1.3.6.1.4.1.39406.2.1.3.9.5.1.5 unsigned32 read-only
The maximum number of port blocks that were allocated to unauthenticated CGNAT subscribers at any given time during the collection interval is recorded. The ratio of this value to the total number of port blocks available for this public IP address is calculated and reported as percentage in this object. Units: Percentage in the range 0 - 100.
                 bWagCgnatUnauthPortBlockMinUtil 1.3.6.1.4.1.39406.2.1.3.9.5.1.6 unsigned32 read-only
The minimum number of port blocks that were allocated to unauthenticated CGNAT subscribers at any given time during the collection interval is recorded. The ratio of this value to the total number of port blocks available for this public IP address is calculated and reported as percentage in this object. Units: Percentage in the range 0 - 100.
                 bWagCgnatUnauthIntervalDuration 1.3.6.1.4.1.39406.2.1.3.9.5.1.7 unsigned32 read-only
Duration of statistics interval in minutes.
         bWagCgnatAuthPortUtilTable 1.3.6.1.4.1.39406.2.1.3.9.6 no-access
A list of CGNAT statistics for each authenticated subscriber that has crossed port utilization threshold. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
             bWagCgnatAuthPortUtilEntry 1.3.6.1.4.1.39406.2.1.3.9.6.1 no-access
A logical row in the bWagCgnatAuthPortUtilTable.
                 bWagCgnatAuthSubscriberMac 1.3.6.1.4.1.39406.2.1.3.9.6.1.1 macaddress no-access
The MAC address of the authenticated CGNAT subscriber for which the current ports in use has crossed the configured high water mark.
                 bWagCgnatAuthSubscriberPortsUtil 1.3.6.1.4.1.39406.2.1.3.9.6.1.2 unsigned32 read-only
Number of ports in use by the authenticated CGNAT subscriber. This does not include the number that can be reclaimed. The value of this object is calculated based on the reclaim time, the ports allocated, and the ports that can be reclaimed at the time of request.
         bWagCgnatAuthPortRisingThresholdCrossedSubCount 1.3.6.1.4.1.39406.2.1.3.9.7 unsigned32 read-only
The count of the total number of authenticated CGNAT subscribers whose port usage is above the configured rising threshold. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
         bWagCgnatPoolGroupStatsTable 1.3.6.1.4.1.39406.2.1.3.9.8 no-access
A list of CGNAT statistics for pool group.
             bWagCgnatPoolGroupStatsEntry 1.3.6.1.4.1.39406.2.1.3.9.8.1 no-access
A logical row in the bWagCgnatPoolGroupTable.
                 bWagCgnatPoolGroupType 1.3.6.1.4.1.39406.2.1.3.9.8.1.1 integer no-access
The type of the CGNAT profile (AuthNapt/UnAuthNapt) that this pool group belongs to. Enumeration: 'none': 0, 'authNapt': 2, 'unAuthNapt': 1.
                 bWagCgnatPoolGroupIndex 1.3.6.1.4.1.39406.2.1.3.9.8.1.2 unsigned32 no-access
Index of the IP Pool group entry in the table.
                 bWagCgnatPoolGroupName 1.3.6.1.4.1.39406.2.1.3.9.8.1.3 displaystring read-only
The name of this pool group.
                 bWagCgnatPoolGroupSubscribers 1.3.6.1.4.1.39406.2.1.3.9.8.1.4 unsigned32 read-only
Number of subscribers currently active with an IP address belonging to this pool group.
                 bWagCgnatPoolGroupUsedIPAddresses 1.3.6.1.4.1.39406.2.1.3.9.8.1.5 unsigned32 read-only
Number of IP addresses in use from this pool group.
                 bWagCgnatPoolGroupReservedIPAddresses 1.3.6.1.4.1.39406.2.1.3.9.8.1.6 unsigned32 read-only
Number of IP addresses reserved from this pool group.
                 bWagCgnatPoolGroupTotalIPAddresses 1.3.6.1.4.1.39406.2.1.3.9.8.1.7 unsigned32 read-only
Total number of IP addresses available in this pool group.
     bWagCgnatNotifObjects 1.3.6.1.4.1.39406.2.1.3.10
Notifications of WAG CGNAT are defined in this branch.
           bWagCgnatProfileIPPoolGroup 1.3.6.1.4.1.39406.2.1.3.10.1 displaystring no-access
IP Pool group name associated with this profile.
           bWagCgnatTotalPoolIPAddresses 1.3.6.1.4.1.39406.2.1.3.10.2 unsigned32 no-access
The total number of IP addresses available in the pool.
           bWagCgnatAuthIpAddrUsedHighThreshold 1.3.6.1.4.1.39406.2.1.3.10.3 unsigned32 no-access
The high threshold for the number of used authenticated CGNAT IP addresses. If the number of used IP addresses exceeds this value, a bWagCgnatAuthIpAddrHighThresholdReached event will be generated. No more bWagCgnatAuthIpAddrHighThresholdReached events will be generated until the value of the number of used authenticated CGNAT IP addresses becomes equal to or less than the value of bWagCgnatAuthIpAddrUsedLowThreshold.
           bWagCgnatAuthIpAddrUsedLowThreshold 1.3.6.1.4.1.39406.2.1.3.10.4 unsigned32 no-access
The low threshold for the number of used authenticated CGNAT IP addresses. If a bWagCgnatAuthIpAddrHighThresholdReached event had previously been generated, and if the number of used IP addresses equals to or falls below this value, a bWagCgnatAuthIpAddrLowThresholdReached event will be generated. No more bWagCgnatAuthIpAddrLowThresholdReached events will be generated until the value of the number of used authenticated CGNAT IP addresses exceeds bWagCgnatAuthIpAddrUsedHighThreshold and a bWagCgnatAuthIpAddrHighThresholdReached is first generated.
           bWagCgnatSubscriberMac 1.3.6.1.4.1.39406.2.1.3.10.5 macaddress no-access
MAC address of the subscriber.
           bWagCgnatTotalPortBlocksPerSubscriber 1.3.6.1.4.1.39406.2.1.3.10.6 unsigned32 no-access
Number of port blocks available for the authenticated CGNAT subscriber.
           bWagCgnatPortBlocksUsedHighThreshold 1.3.6.1.4.1.39406.2.1.3.10.7 unsigned32 no-access
The high threshold for the number of used CGNAT port blocks by authenticated subscribers. If the number of used port blocks exceeds this value, a bWagCgnatPortBlocksUsedHighThresholdReached event will be generated. No more bWagCgnatPortBlocksUsedHighThresholdReached events will be generated until the value of the number of used CGNAT port blocks becomes equal to or less than the value of bWagCgnatPortBlocksUsedLowThreshold. The ratio of this value to the total number of port blocks is reported as percentage in this object. Units: Percentage in the range 0 - 100.
           bWagCgnatPortBlocksUsedLowThreshold 1.3.6.1.4.1.39406.2.1.3.10.8 unsigned32 no-access
The low threshold for the number of used CGNAT port blocks by authenticated subscribers. If a bWagCgnatPortBlocksUsedHighThresholdReached event had previously been generated, and if the number of used port blocks equals to or falls below this value, a bWagCgnatPortBlocksUsedLowThresholdReached event will be generated. No more bWagCgnatPortBlocksUsedLowThreshold events will be generated until the value of the number of used CGNAT Port blocks exceeds bWagCgnatPortBlocksUsedHighThresholdReached and a bWagCgnatPortBlocksUsedHighThresholdReached is first generated. The ratio of this value to the total number of port blocks is reported as percentage in this object. Units: Percentage in the range 0 - 100.
     bWagProcessingLatencyMIBObjects 1.3.6.1.4.1.39406.2.1.3.11
WAG Processing Latency objects are defined in this branch.
           bWagUpstreamProcessingLatencyPktCount 1.3.6.1.4.1.39406.2.1.3.11.1 unsigned32 read-only
The count of the total number of subscriber upstream packets handled by WAG
           bWagUpstreamProcessingLatencyMax 1.3.6.1.4.1.39406.2.1.3.11.2 unsigned32 read-only
Maximum processing time recorded for subscriber upstream packets handled in WAG
           bWagUpstreamProcessingLatencyMin 1.3.6.1.4.1.39406.2.1.3.11.3 unsigned32 read-only
Minimum processing time recorded for subscriber upstream packets handled in WAG
           bWagUpstreamProcessingLatencyAvg 1.3.6.1.4.1.39406.2.1.3.11.4 unsigned32 read-only
Average processing time for subscriber upstream packets handled in WAG
           bWagDownstreamProcessingLatencyPktCount 1.3.6.1.4.1.39406.2.1.3.11.5 unsigned32 read-only
The count of the total number of subscriber downstream packets handled by WAG
           bWagDownstreamProcessingLatencyMax 1.3.6.1.4.1.39406.2.1.3.11.6 unsigned32 read-only
Maximum processing time recorded for subscriber downstream packets handled in WAG
           bWagDownstreamProcessingLatencyMin 1.3.6.1.4.1.39406.2.1.3.11.7 unsigned32 read-only
Minimum processing time recorded for subscriber downstream packets handled in WAG.
           bWagDownstreamProcessingLatencyAvg 1.3.6.1.4.1.39406.2.1.3.11.8 unsigned32 read-only
Average processing time for subscriber downstream packets handled in WAG.
     bWagProcessingLatencyNotifObjects 1.3.6.1.4.1.39406.2.1.3.12
Notifications of WAG Processing Latency are defined in this branch.
     bWagDhcpv6MIBObjects 1.3.6.1.4.1.39406.2.1.3.13
WAG DHCPv6 statistics are defined in this branch.
           bWagDHCPv6Table 1.3.6.1.4.1.39406.2.1.3.13.1 no-access
A list of DHCPv6 periodic statistics.
               bWagDHCPv6Entry 1.3.6.1.4.1.39406.2.1.3.13.1.1 no-access
A logical row in the bWagDHCPv6Table.
                   bWagDHCPv6StatsInterval 1.3.6.1.4.1.39406.2.1.3.13.1.1.1 integer32 no-access
The interval where the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
                   bWagDHCPv6IntervalDuration 1.3.6.1.4.1.39406.2.1.3.13.1.1.2 integer32 read-only
Duration of stats interval in minutes
                   bWagDHCPv6SolicitReplyIntervalMin 1.3.6.1.4.1.39406.2.1.3.13.1.1.3 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
                   bWagDHCPv6SolicitReplyIntervalMax 1.3.6.1.4.1.39406.2.1.3.13.1.1.4 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
                   bWagDHCPv6SolicitReplyIntervalAvg 1.3.6.1.4.1.39406.2.1.3.13.1.1.5 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
                   bWagDHCPv6SolicitReplyIntervalLast 1.3.6.1.4.1.39406.2.1.3.13.1.1.6 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DHCPv6 Solicit message received by the WAG and its corresponding DHCPv6 Reply message sent by the WAG. The value is in microseconds.
                   bWagDHCPv6RequestReplyLatencyMin 1.3.6.1.4.1.39406.2.1.3.13.1.1.7 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DHCPv6 Request message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
                   bWagDHCPv6RequestReplyLatencyMax 1.3.6.1.4.1.39406.2.1.3.13.1.1.8 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DHCPv6 Request message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
                   bWagDHCPv6RequestReplyLatencyAvg 1.3.6.1.4.1.39406.2.1.3.13.1.1.9 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DHCPv6 Request message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) is sent by the WAG. The value is in microseconds.
                   bWagDHCPv6RequestReplyLatencyLast 1.3.6.1.4.1.39406.2.1.3.13.1.1.10 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DHCPv6 Request message received by the WAG and its corresponding DHCPv6 Reply message sent by the WAG. The value is in microseconds.
                   bWagDHCPv6SolicitAdvLatencyMin 1.3.6.1.4.1.39406.2.1.3.13.1.1.11 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Advertisement message(s) sent by the WAG. The value is in microseconds.
                   bWagDHCPv6SolicitAdvLatencyMax 1.3.6.1.4.1.39406.2.1.3.13.1.1.12 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Advertisement message(s) sent by the WAG. The value is in microseconds.
                   bWagDHCPv6SolicitAdvLatencyAvg 1.3.6.1.4.1.39406.2.1.3.13.1.1.13 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Advertisement message(s) sent by the WAG. The value is in microseconds.
                   bWagDHCPv6SolicitAdvLatencyLast 1.3.6.1.4.1.39406.2.1.3.13.1.1.14 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DHCPv6 Solicit message received by the WAG and its corresponding DHCPv6 Advertisement message sent by the WAG. The value is in microseconds.
                   bWagDHCPv6AdvRequestIntervalMin 1.3.6.1.4.1.39406.2.1.3.13.1.1.15 unsigned32 read-only
The measure of the minimum time interval, during the reporting period, between all DHCPv6 Advertisement message(s) sent by the WAG and the corresponding DHCPv6 Request message(s) received by the WAG. The value is in microseconds.
                   bWagDHCPv6AdvRequestIntervalMax 1.3.6.1.4.1.39406.2.1.3.13.1.1.16 unsigned32 read-only
The measure of the maximum time interval, during the reporting period, between all DHCPv6 Advertisement message(s) sent by the WAG and the corresponding DHCPv6 Request message(s) received by the WAG. The value is in microseconds.
                   bWagDHCPv6AdvRequestIntervalAvg 1.3.6.1.4.1.39406.2.1.3.13.1.1.17 unsigned32 read-only
The measure of the average time interval, during the reporting period, between all DHCPv6 Advertisement message(s) sent by the WAG and the corresponding DHCPv6 Request message(s) received by the WAG. The value is in microseconds.
                   bWagDHCPv6AdvRequestIntervalLast 1.3.6.1.4.1.39406.2.1.3.13.1.1.18 unsigned32 read-only
The measure of the time interval, during the reporting period, between the most recent DHCPv6 Advertisement message sent by the WAG and its corresponding DHCPv6 Request message received by the WAG. The value is in microseconds.
                   bWagDHCPv6SolicitReceived 1.3.6.1.4.1.39406.2.1.3.13.1.1.19 unsigned32 read-only
The count of the total number of DHCPv6 Solicit message(s) received during the reporting period.
                   bWagDHCPv6AdvertisementSent 1.3.6.1.4.1.39406.2.1.3.13.1.1.20 unsigned32 read-only
The count of the total number of DHCPv6 Advertisement message(s) sent during the reporting period.
                   bWagDHCPv6RequestReceived 1.3.6.1.4.1.39406.2.1.3.13.1.1.21 unsigned32 read-only
The count of the total number of DHCPv6 Request message(s) received during the reporting period.
                   bWagDHCPv6ReplySent 1.3.6.1.4.1.39406.2.1.3.13.1.1.22 unsigned32 read-only
The count of the total number of DHCPv6 Reply message(s) sent during the reporting period.
     bWagMHNMIBObjects 1.3.6.1.4.1.39406.2.1.3.14
WAG MHN objects are defined in this branch.
           bWagMHNProfileStatsTable 1.3.6.1.4.1.39406.2.1.3.14.1 no-access
A list of statistics for the MHN profiles.
               bWagMHNProfileStatsEntry 1.3.6.1.4.1.39406.2.1.3.14.1.1 no-access
A logical row in the bWagMHNProfileTable.
                   bWagMHNProfileStatsIndex 1.3.6.1.4.1.39406.2.1.3.14.1.1.1 integer32 no-access
A number uniquely identifying this MHN profile.
                   bWagMHNProfileName 1.3.6.1.4.1.39406.2.1.3.14.1.1.2 displaystring read-only
The name of the MHN profile.
                   bWagMHNProfileNATIPPoolGroup 1.3.6.1.4.1.39406.2.1.3.14.1.1.3 displaystring read-only
IP Pool group name associated with this profile.
                   bWagMHNProfileMaxSubscribers 1.3.6.1.4.1.39406.2.1.3.14.1.1.4 unsigned32 read-only
Maximum number of subscribers per MHN profile.
                   bWagMHNProfileMaxIPAddresses 1.3.6.1.4.1.39406.2.1.3.14.1.1.5 unsigned32 read-only
The maximum number of public IP addresses required to fully service the configured max-subscribers for the profile.
                   bWagMHNProfileUsedIPAddresses 1.3.6.1.4.1.39406.2.1.3.14.1.1.6 unsigned32 read-only
Number of IP addresses in use in this profile.
                   bWagMHNProfileTotalPortBlocks 1.3.6.1.4.1.39406.2.1.3.14.1.1.7 unsigned32 read-only
Number of total port blocks in this profile. This is equivalent to (block-size) in this profile.
                   bWagMHNProfileTotalPoolIPAddresses 1.3.6.1.4.1.39406.2.1.3.14.1.1.8 unsigned32 read-only
Total number of IP addresses available in the pool.
     bWagVrgApiNotifObjects 1.3.6.1.4.1.39406.2.1.3.15
Notifications of WAG VrgApi are defined in this branch.
           bWagVrgApiIpAddrUsedHighThreshold 1.3.6.1.4.1.39406.2.1.3.15.1 unsigned32 no-access
The high threshold for the number of used IP addresses for VRGAPI subscribers. If the number of used IP addresses exceeds this value, a bWagVrgApiIpAddrUsedHighThresholdReached event will be generated. No more bWagVrgApiIpAddrUsedHighThresholdReached events will be generated until the value of the number of used IP addresses for VRGAPI subscribers becomes equal to or less than the value of bWagVrgApiIpAddrUsedLowThreshold.
           bWagVrgApiIpAddrUsedLowThreshold 1.3.6.1.4.1.39406.2.1.3.15.2 unsigned32 no-access
The low threshold for the number of used IP addresses for VRGAPI subscribers. If a bWagVrgApiIpAddrUsedHighThreshold event had previously been generated, and if the number of used IP addresses equals to or falls below this value, a bWagVrgApiIpAddrUsedLowThresholdReached event will be generated. No more bWagVrgApiIpAddrUsedLowThresholdReached events will be generated until the value of the number of used IP addresses for VRGAPI subscribers exceeds bWagVrgApiIpAddrUsedHighThreshold and a bWagVrgApiIpAddrUsedHighThresholdReached is first generated.
           bWagrgApiIPPoolGroup 1.3.6.1.4.1.39406.2.1.3.15.3 displaystring read-only
IP Pool group name associated with Mhn profile.
           bWagVRGApiIPoolIPAddresses 1.3.6.1.4.1.39406.2.1.3.15.4 unsigned32 no-access
The total number of IP addresses available in the pool.
     bWagDsLiteMIBObjects 1.3.6.1.4.1.39406.2.1.3.16
WAG DSLite objects are defined in this branch.
           bWagDsLiteProfileStatsTable 1.3.6.1.4.1.39406.2.1.3.16.1 no-access
A list of DSLite CGNAT statistics for profiles.
               bWagDsLiteProfileStatsEntry 1.3.6.1.4.1.39406.2.1.3.16.1.1 no-access
A logical row in the bWagDsLiteProfileTable.
                   bWagDsLiteProfileStatsIndex 1.3.6.1.4.1.39406.2.1.3.16.1.1.1 integer32 no-access
A number uniquely identifying this DS-Lite profile.
                   bWagDsLiteProfileName 1.3.6.1.4.1.39406.2.1.3.16.1.1.2 displaystring read-only
The name of the DS-Lite profile.
                   bWagDsLiteProfileType 1.3.6.1.4.1.39406.2.1.3.16.1.1.3 displaystring read-only
The type of the CGNAT profile DS-Lite.
                   bWagDsLiteProfileNATIPPoolGroup 1.3.6.1.4.1.39406.2.1.3.16.1.1.4 displaystring read-only
IP Pool group name associated with DS-Lite profile.
                   bWagDsLiteProfileMaxIPAddresses 1.3.6.1.4.1.39406.2.1.3.16.1.1.5 unsigned32 read-only
This is the maximum number of IPs required to support the number of tunnels configured. This is calculated based on three other configuration parameters: block-size, number of port blocks, max-tunnels, as show below MAX IP Adresses = (max-tunnels/(64512/(block-size*num-blocks)) rounded up to the next multiple of 4
                   bWagDsLiteProfileUsedIPAddresses 1.3.6.1.4.1.39406.2.1.3.16.1.1.6 unsigned32 read-only
Number of IP addresses in use in DS-Lite profile.
                   bWagDsLiteProfileReservedIPAddresses 1.3.6.1.4.1.39406.2.1.3.16.1.1.7 unsigned32 read-only
Number of IP addresses reserved in DS-Lite profile.
                   bWagDsLiteProfileTotalPoolIPAddresses 1.3.6.1.4.1.39406.2.1.3.16.1.1.8 unsigned32 read-only
Total number of IP addresses available in the pool.
                   bWagDsLiteProfileMaxSubscribers 1.3.6.1.4.1.39406.2.1.3.16.1.1.9 unsigned32 read-only
Number of max subscribers configured in this profile.
                   bWagDsLiteProfileMaxTunnels 1.3.6.1.4.1.39406.2.1.3.16.1.1.10 unsigned32 read-only
Number of max tunnels configured in this profile.
           bDSLitePortBlocksTotal 1.3.6.1.4.1.39406.2.1.3.16.2 unsigned32 read-only
The total number of DS-Lite port blocks.
           bDSLitePortBlocksInUse 1.3.6.1.4.1.39406.2.1.3.16.3 unsigned32 read-only
The total number of DS-Lite port blocks in use.
           bDSLiteTunnelsUsingOnePortBlock 1.3.6.1.4.1.39406.2.1.3.16.4 unsigned32 read-only
The total number of tunnels using one port block in DS-Lite.
           bDSLiteTunnelsUsingTwoPortBlocks 1.3.6.1.4.1.39406.2.1.3.16.5 unsigned32 read-only
The total number of tunnels using two port blocks in DS-Lite.
           bDSLiteTunnelsUsingThreePortBlocks 1.3.6.1.4.1.39406.2.1.3.16.6 unsigned32 read-only
The total number of tunnels using three port blocks in DS-Lite.
           bDSLiteTunnelsUsingFourPortBlocks 1.3.6.1.4.1.39406.2.1.3.16.7 unsigned32 read-only
The total number of tunnels using four port blocks in DS-Lite.
           bDSLiteTunnelsUsingFivePortBlocks 1.3.6.1.4.1.39406.2.1.3.16.8 unsigned32 read-only
The total number of tunnels using five port blocks in DS-Lite.
     bWagDsLiteNotifObjects 1.3.6.1.4.1.39406.2.1.3.17
Notifications of WAG DSLite are defined in this branch.
     bWagIpSystemStatsMIBObjects 1.3.6.1.4.1.39406.2.1.3.18
WAG IP system statistics objects are defined in this branch.
           bWagIpSystemStatsReasmReqds 1.3.6.1.4.1.39406.2.1.3.18.1 counter64 read-only
The number of IP fragments received that needed to be reassembled.
           bWagIpIfStatsOutFragOKs 1.3.6.1.4.1.39406.2.1.3.18.2 counter64 read-only
The number of IP datagrams that have been successfully fragmented.
           bWagIpSystemStatsReasmFails 1.3.6.1.4.1.39406.2.1.3.18.3 counter64 read-only
The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
           bWagIpv6IfStatsReasmReqds 1.3.6.1.4.1.39406.2.1.3.18.4 counter64 read-only
The number of IPv6 fragments received which needed to be reassembled at this interface.
           bWagIpv6IfStatsOutFragOKs 1.3.6.1.4.1.39406.2.1.3.18.5 counter64 read-only
The number of IPv6 datagrams that have been successfully fragmented at output interface.
           bWagIpv6IfStatsReasmFails 1.3.6.1.4.1.39406.2.1.3.18.6 counter64 read-only
The number of failures detected by the IPv6 re- assembly algorithm (for whatever reason: timed out, errors, etc.).