BEGEMOT-ATM-MIB: View SNMP OID List / Download MIB

VENDOR: FRAUNHOFER FOKUS


 Home MIB: BEGEMOT-ATM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, BEGEMOT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 begemotAtm 1.3.6.1.4.1.12325.1.101
The Begemot MIB for ATM interfaces.
         begemotAtmObjects 1.3.6.1.4.1.12325.1.101.1
             begemotAtmIfTable 1.3.6.1.4.1.12325.1.101.1.1 no-access
This table contains an entry for each hardware ATM interface. The table is indexed by the interface index.
                 begemotAtmIfEntry 1.3.6.1.4.1.12325.1.101.1.1.1 no-access
This is a table entry describing one ATM hardware interface.
                     begemotAtmIfName 1.3.6.1.4.1.12325.1.101.1.1.1.1 displaystring read-only
Name of the ATM interface.
                     begemotAtmIfPcr 1.3.6.1.4.1.12325.1.101.1.1.1.2 unsigned32 read-only
The line cell rate of the interface.
                     begemotAtmIfMedia 1.3.6.1.4.1.12325.1.101.1.1.1.3 integer read-only
The physical medium. Enumeration: 'sm622': 11, 'taxi100': 5, 'sm155': 8, 'unknown': 3, 'utp155': 9, 'virtual': 12, 'utp25': 4, 'mm622': 10, 'mm155': 7, 'other': 1, 'taxi140': 6.
                     begemotAtmIfVpiBits 1.3.6.1.4.1.12325.1.101.1.1.1.4 unsigned32 read-only
Number of VPI bits that are used by the device.
                     begemotAtmIfVciBits 1.3.6.1.4.1.12325.1.101.1.1.1.5 unsigned32 read-only
Number of VCI bits that are used by the device.
                     begemotAtmIfMaxVpcs 1.3.6.1.4.1.12325.1.101.1.1.1.6 unsigned32 read-only
The maximum number of VPC supported on this device. This may not be larger than 2^begemotAtmIfVpiBits.
                     begemotAtmIfMaxVccs 1.3.6.1.4.1.12325.1.101.1.1.1.7 unsigned32 read-only
The maximum number of VCC supported on this device. This may not be larger than 2^(begemotAtmIfVpiBits + begemotAtmVciBits).
                     begemotAtmIfEsi 1.3.6.1.4.1.12325.1.101.1.1.1.8 atmesi read-only
The default End System Identifier as reported by the hardware. If the hardware has no ESI all six bytes are reported as 0.
                     begemotAtmIfCarrierStatus 1.3.6.1.4.1.12325.1.101.1.1.1.9 integer read-only
The state of the carrier. For interfaces which don't have the notion of a carriere none is reported. Enumeration: 'carrierOff': 2, 'none': 4, 'carrierOn': 1, 'unknown': 3.
                     begemotAtmIfMode 1.3.6.1.4.1.12325.1.101.1.1.1.10 integer read-write
The mode of the SUNI interface. For interfaces without SUNI unknown is reported in which case the variable is read-only. Some types of interfaces may not be able to change this value. Enumeration: 'unknown': 3, 'sonet': 1, 'sdh': 2.
             begemotAtmIfTableLastChange 1.3.6.1.4.1.12325.1.101.1.2 timeticks read-only
The value of sysUpTime the last time that an entry in begemotIfTable was created or destroyed. If the table is unchanged since the last coldStart this value is zero.
             begemotAtmHWTable 1.3.6.1.4.1.12325.1.101.1.3 no-access
This table augments the begemotAtmIfTable and contains an entry for each hardware ATM interface. The entries describe the ATM hardware interface.
                 begemotAtmHWEntry 1.3.6.1.4.1.12325.1.101.1.3.1 no-access
This is a table entry describing one ATM hardware interface.
                     begemotAtmHWVendor 1.3.6.1.4.1.12325.1.101.1.3.1.1 displaystring read-only
A short string naming the vendor of the interface card.
                     begemotAtmHWDevice 1.3.6.1.4.1.12325.1.101.1.3.1.2 displaystring read-only
A short string naming the brand of the interface card.
                     begemotAtmHWSerial 1.3.6.1.4.1.12325.1.101.1.3.1.3 unsigned32 read-only
The serial number of the interface card or 0 if it doesn't report a serial number.
                     begemotAtmHWVersion 1.3.6.1.4.1.12325.1.101.1.3.1.4 unsigned32 read-only
The hardware version of the interface card or 0 if it doesn't report a hardware version number.
                     begemotAtmHWSoftVersion 1.3.6.1.4.1.12325.1.101.1.3.1.5 unsigned32 read-only
The firmware version of the interface card or 0 if it doesn't report a firmware version number.
             begemotAtmSysGroup 1.3.6.1.4.1.12325.1.101.1.4