BCSSIMULCRYPTSCS-MIB: View SNMP OID List / Download MIB

VENDOR: GENERAL INSTRUMENT


 Home MIB: BCSSIMULCRYPTSCS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, BCS-IDENT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 bcsSimulcryptScs 1.3.6.1.4.1.1166.7.7
The Simulcrypt SCS MIB module for Motorola BCS products.
     bcsSimScsConfig 1.3.6.1.4.1.1166.7.7.1
         bcsSimScsConfigGeneral 1.3.6.1.4.1.1166.7.7.1.1
             bcsSimScsNetworkId 1.3.6.1.4.1.1166.7.7.1.1.1 unsigned32 read-write
This parameter specifies the network ID used for this Simulcrypt system. The network ID is a Simulcrypt system parameter, please see Simulcrypt system specifications for a more detailed explanation. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
             bcsSimScsMaxNetworkDelay 1.3.6.1.4.1.1166.7.7.1.1.2 unsigned32 read-write
Worst case propagation delay, in milliseconds, introduced by network topology. Will be factored into negotiations of the actual Simulcrypt crypto-period. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
             bcsSimScsNominalCryptoPeriod 1.3.6.1.4.1.1166.7.7.1.1.3 unsigned32 read-write
This value specifies the nominal crypto-period in seconds. This value is used as a target for this device during crypto- period negotiations. The actual negotiated crypto-period may be equal to or greater than this value. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
             bcsSimScsAccessCriteriaSource 1.3.6.1.4.1.1166.7.7.1.1.4 integer read-write
This value specifies which vendor will provide the access criteria information. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect. Enumeration: 'serviceId': 3, 'noAc': 2, 'dtviaFixedAc': 1.
             bcsSimScsEcmgTimeout 1.3.6.1.4.1.1166.7.7.1.1.5 unsigned32 read-write
This parameter specifies how long the SCS should wait for a response from the ECMG. This value is specified in seconds. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
             bcsSimScsEcmIdInitial 1.3.6.1.4.1.1166.7.7.1.1.6 unsigned32 read-write
Each ECM ID and Super CAS ID combination in the Simulcrypt system must be globally unique. To simplify configuration, each SCS is given a starting ECM ID to assign to the first ECM stream it creates. The number is incremented as new ECM streams are created. Each SCS must be configured with a different value. The initial values should be spaced sufficiently to prevent overlapping. Recommended spacing is 128. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
             bcsSimScsEcmChannelTestPeriodicity 1.3.6.1.4.1.1166.7.7.1.1.7 unsigned32 read-write
Periodicity for the channel test procedure.Default set to 20sec. @Range(min=1, max=3600) @Config(config=yes, reboot=no) @Save(semSaveConfig, value=2, default=yes) @File(config.ini, type='ini')
             bcsSimScsEcmNetworkDelay 1.3.6.1.4.1.1166.7.7.1.1.8 unsigned32 read-write
The network delay value to account for delays while waiting on an ECM response.Default set to 500msec. @Range(min=0, max=30000) @Config(config=yes, reboot=no) @Save(semSaveConfig, value=2, default=yes) @File(config.ini, type='ini')
             bcsSimScsEcmReplyTimeout 1.3.6.1.4.1.1166.7.7.1.1.9 unsigned32 read-write
Time to wait before timing out while waiting on a response to a channel/stream management message (i.e.: channel_setup, channel_test, stream_setup).Default set to 4000 msec. @Range(min=100, max=60000) @Config(config=yes, reboot=no) @Save(semSaveConfig, value=2, default=yes) @File(config.ini, type='ini')
         bcsSimScsEcmgConnectionTable 1.3.6.1.4.1.1166.7.7.1.2 no-access
This table persists the Simulcrypt SCS to ECMG connections or channels. The device will send Simulcrypt control words to a maximum of bcsSimScsMaxEcmg.
             bcsSimScsEcmgConnectionEntry 1.3.6.1.4.1.1166.7.7.1.2.1 no-access
A single entry in the bcsSimScsEcmgConnectionTable table.
                 bcsSimScsEcmgConnectIndex 1.3.6.1.4.1.1166.7.7.1.2.1.1 integer32 no-access
The Simulcrypt ECMG Connection table index.
                 bcsSimScsEcmgConnectEnabled 1.3.6.1.4.1.1166.7.7.1.2.1.2 enabledisabletype read-write
Each row in the bcsSimScsEcmgConnectionTable represents a potential SCS<=>ECMG connection that will be attempted during simulcrypt SCS initialization. This setting controls whether or not the attempt is made. This setting has two legal settings: disabled (1) <= The connection will be attempted. enabled (2) <= The connection will not be attempted. Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
                 bcsSimScsEcmgConnectSuperCasId 1.3.6.1.4.1.1166.7.7.1.2.1.3 unsigned32 read-write
The Super CAS ID of the ECMG that will be connected to by the Simulcrypt SCS. The Super CAS ID is the 32 bit concatenation of the CAS ID and the Sub CAS ID. The CAS ID identifies the Conditional Access provider. It supplies the upper 16 bits of the SuperCAS ID. The Sub CAS ID identifies instances of a provider's ECMGs on the Simulcrypt network. It supplies the lower 16 bits of the Super CAS ID. Each ECM ID and SuperCAS ID combination in the Simulcrypt system must be globally unique. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
                 bcsSimScsEcmgConnectIpAddr 1.3.6.1.4.1.1166.7.7.1.2.1.4 ipaddress read-write
The IP address that the ECMG is listening on. Used to open a socket between the SCS and the ECMG. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
                 bcsSimScsEcmgConnectPort 1.3.6.1.4.1.1166.7.7.1.2.1.5 integer32 read-write
The remote port that the ECMG is listening on. Used to open a socket between the SCS and the ECMG. SEM Note: Once written, a save must be performed via the semSaveConfig parameter and the SEM must be rebooted for the change to take effect.
         bcsSimScsEcmgRedundancyConfigTable 1.3.6.1.4.1.1166.7.7.1.3 no-access
This table configures parameters associated with the ECMG redudancy feature. @Commit(param=bcsSimScsEcmgRedundancyConfigApplyChange, value=2) @Save(semSaveConfig, value=2) @File(config.ini, type='ini')
             bcsSimScsEcmgRedundancyConfigEntry 1.3.6.1.4.1.1166.7.7.1.3.1 no-access
A single entry in bcsSimScsEcmgRedundancyConfigTable.
                 bcsSimScsEcmgRedundancyConfigIndex 1.3.6.1.4.1.1166.7.7.1.3.1.1 integer32 no-access
Index into the table.
                 bcsSimScsEcmgRedundancyConfigAutoSwitchBack 1.3.6.1.4.1.1166.7.7.1.3.1.2 enabledisabletype read-write
If enabled (2), programs (which were taken away earlier from this ECMG upon its failure) will be automatically switched back to this ECMG after its recovery. If disabled (1), such an automatic switching will not happen. Detailed semantics are captured in requirements.Default value is enabled.
                 bcsSimScsEcmgRedundancyConfigManualSwitchBack 1.3.6.1.4.1.1166.7.7.1.3.1.3 manualswitchbacktype read-write
When autoswitchback is enabled manual switch back is notActive.When manual switch back Button get pressed Manual switch back state get changed from manualSwitchBackNotInProgress(1) to (2)manualSwitchBack.Then the programs (which were taken away earlier from this ECMG upon its failure)will be switched back to it. Once the switchback progress get finished ,manual switch back state changed to (1) manualSwitchBackNotInProgress.
                 bcsSimScsEcmgRedundancyConfigMaxStreams 1.3.6.1.4.1.1166.7.7.1.3.1.4 integer32 read-write
Maximum number of streams supported.The default value is 128. @Config(config=yes, reboot=yes)
         bcsSimScsEcmgRedundancyConfigApplyTable 1.3.6.1.4.1.1166.7.7.1.4 no-access
Table of Apply Change for the data for bcsSimScsEcmgRedundancyConfigTable. A row of this table corresponds to a row in bcsSimScsEcmgRedundancyConfigTable.
             bcsSimScsEcmgRedundancyConfigApplyEntry 1.3.6.1.4.1.1166.7.7.1.4.1 no-access
ECMG Redundancy Configuration Apply Table Entry.
                 bcsSimScsEcmgRedundancyConfigApplyIndex 1.3.6.1.4.1.1166.7.7.1.4.1.1 integer32 no-access
ECMG index - also maps to the bcsSimScsEcmgRedundancyConfigTable index
                 bcsSimScsEcmgRedundancyConfigApplyChange 1.3.6.1.4.1.1166.7.7.1.4.1.2 applydatatodevicetype read-write
The Apply for a row of data in bcsSimScsEcmgRedundancyConfigTable. A row in this table corresponds to the same row index in the bcsSimScsEcmgRedundancyConfigTable. This parameter MUST be set to 'apply' in order for any of the data in the rows to take effect in the SEM. This parameter MUST be set LAST after all other data in the configuration table rows has been configured. @Config(config=no, reboot=no)
     bcsSimScsStatus 1.3.6.1.4.1.1166.7.7.2
         bcsSimScsStatusGeneral 1.3.6.1.4.1.1166.7.7.2.1
             bcsSimScsMibSupportStatus 1.3.6.1.4.1.1166.7.7.2.1.1 integer read-only
Indicates whether the device is capable of supporting and/or enabled to support the functionality of the bcsSimulcryptScs MIB. Enumeration: 'notCapable': 1, 'enabled': 3, 'capable': 2.
             bcsSimScsMaxEcmg 1.3.6.1.4.1.1166.7.7.2.1.2 unsigned32 read-only
The maximum number of ECMGs this device can support.
             bcsSimScsMaxPrograms 1.3.6.1.4.1.1166.7.7.2.1.3 unsigned32 read-only
The maximum number of programs this device can support.
             bcsSimScsMaxProgramEcmg 1.3.6.1.4.1.1166.7.7.2.1.4 unsigned32 read-only
The maximum number of ECMGs that can be associated with a program in this device.
             bcsSimScsEcmgRedundancyConfigInvalidApplyText 1.3.6.1.4.1.1166.7.7.2.1.5 displaystring read-only
When bcsSimScsEcmgRedundancyConfigApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. This entry contains the description for the most recent apply of a related entry that was invalid.
         bcsSimScsEcmgStatusTable 1.3.6.1.4.1.1166.7.7.2.2 no-access
It contains status information for the SCS to ECMG connections. There can be up to bcsSimScsMaxEcmg active SCS to ECMG connections at a time.
             bcsSimScsEcmgStatusEntry 1.3.6.1.4.1.1166.7.7.2.2.1 no-access
A single entry in the bcsSimScsEcmgStatusTable table.
                 bcsSimScsEcmgStatusIndex 1.3.6.1.4.1.1166.7.7.2.2.1.1 integer32 no-access
This index is used to traverse the bcsSimScsEcmgTable table. The index varies from 1..bcsSimScsMaxEcmg. In the event that some connections are not active this will be designated by the value of bcsSimScsEcmgChannelState.
                 bcsSimScsEcmgTcpState 1.3.6.1.4.1.1166.7.7.2.2.1.2 integer read-only
This column specifies TCP connection state of this SCS <==> ECMG connection. Enumeration: 'open': 1, 'closed': 2, 'error': 3.
                 bcsSimScsEcmgChannelId 1.3.6.1.4.1.1166.7.7.2.2.1.3 unsigned32 read-only
This column specifies channel ID.
                 bcsSimScsEcmgChannelState 1.3.6.1.4.1.1166.7.7.2.2.1.4 integer read-only
This column specifies ECMG channel state of this SCS <==> ECMG connection. Enumeration: 'notOpen': 2, 'open': 1, 'error': 3.
                 bcsSimScsEcmgSuperCasId 1.3.6.1.4.1.1166.7.7.2.2.1.5 unsigned32 read-only
This column specifies super CAS Id of the ECMG that the SCS is connected to on this connection.
         bcsSimScsProgramTable 1.3.6.1.4.1.1166.7.7.2.3 no-access
It contains status information for the SCS programs. There can be up to bcsSimScsMaxPrograms Simulcrypt programs active in the SCS at a time. Each program can be associated with up to bcsSimScsMaxProgramEcmg.
             bcsSimScsProgramEntry 1.3.6.1.4.1.1166.7.7.2.3.1 no-access
A single entry in the bcsSimScsProgramTable table.
                 bcsSimScsProgramIndex 1.3.6.1.4.1.1166.7.7.2.3.1.1 integer32 no-access
This index is used to traverse the bcsSimScsProgramTable table. Limited by bcsSimScsMaxPrograms.
                 bcsSimScsProgramEcmgIndex 1.3.6.1.4.1.1166.7.7.2.3.1.2 integer32 no-access
ECMG index. This index is used to traverse the bcsSimScsProgramTable table. Limited by bcsSimScsMaxProgramEcmg.
                 bcsSimScsProgramState 1.3.6.1.4.1.1166.7.7.2.3.1.3 integer read-only
This column displays the service state of this program. (1) - program configured, no event running (2) - program configured, event running normally (3) - program not configured Enumeration: 'eventRunning': 2, 'noEventRunning': 1, 'notConfigured': 3.
                 bcsSimScsProgramCryptoPeriod 1.3.6.1.4.1.1166.7.7.2.3.1.4 unsigned32 read-only
This column displays the actual crypto-period in seconds that is in use for this program.
                 bcsSimScsProgramChannelId 1.3.6.1.4.1.1166.7.7.2.3.1.5 unsigned32 read-only
This column displays the channel ID.
                 bcsSimScsProgramEcmgSuperCasId 1.3.6.1.4.1.1166.7.7.2.3.1.6 unsigned32 read-only
This column displays the Super CAS-ID of the 1st ECMG on this service.
                 bcsSimScsProgramEcmgStreamState 1.3.6.1.4.1.1166.7.7.2.3.1.7 integer read-only
This column displays the stream state for an ECMG on this service. Enumeration: 'notConfigured': 4, 'closed': 2, 'error': 3, 'ecmTimeout': 6, 'invalidCasId': 5, 'open': 1.