BAY-STACK-EDM-MIB: View SNMP OID List / Download MIB

VENDOR: SYNOPTICS

Home	MIB: BAY-STACK-EDM-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SYNOPTICS-ROOT-MIB		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
bayStackEdmMib	1.3.6.1.4.1.45.5.36			Enterprise Device Manager (EDM) MIB for the Avaya stackable Ethernet Routing Switches family Copyright 2013 Avaya Networks All rights reserved. This Avaya Networks SNMP Management Information Base Specification embodies Avaya Networks' confidential and proprietary intellectual property. Avaya Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Avaya Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
bayStackEdmNotifications	1.3.6.1.4.1.45.5.36.0
bayStackEdmObjects	1.3.6.1.4.1.45.5.36.1
bsEdmScalars	1.3.6.1.4.1.45.5.36.1.1
bsEdmHelpFilePath	1.3.6.1.4.1.45.5.36.1.1.1	octet string	read-write	This object is used to specify the location of the EDM help file. The value is an ASCII string similar to a URL, and must be in one of the following formats: - 'usb://' - the help file is located on the usb port of the switch, if not in stack, or on the usb port of the base unit, if in stack. - 'usb:///' - the help file is located on the usb port of the switch, if not in stack, or on the usb port of the specified unit, if in stack. The unit number must be between 1 and 8. - 'tftp:///' - the help file is located on the TFTP server at the specified IP address. - 'tftp:///' - the help file is located on the TFTP server at the specified host. The hostname must have at most 64 characters in length. In each of the supported formats, the filename must have at most 255 characters in length.
bsEdmInactivityTimeout	1.3.6.1.4.1.45.5.36.1.1.2	integer32	read-write	Used to indicate the amount of idle time, in seconds, to wait before timing out an EDM session.