AVAYA-SURV-MIB: View SNMP OID List / Download MIB

VENDOR: AVAYA COMMUNICATION


 Home MIB: AVAYA-SURV-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 avSurvMib 1.3.6.1.4.1.6889.2.6.4
R4.1 Standard Local Survivability (SLS) MIB This module defines an interface to Survivability mode of operation.This allows a gateway to have a basic set of call features if it loses communication with a main call controller (CC). When the gateway is in survivabilty mode of operation, it will continue to register to H.248 controller IP addresses in the MGC list. If a re-registration to the H.248 controller can be made, the survivability mode will be disabled and any new calls will be managed by the MGC. Active calls between two local IP phones will be maintained because they are established as shuffled calls. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification)embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisions. It is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties non-exclusive license to use this Specification in connection with the management of AVAYA products. This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. avSurvMib | + .0 avSurvNotification | + .1 avSurvConfig | + .2 avSurvStationTable | (index: avSurvStationIndex) | + .3 avSurvTrunkGroupTable | (index: avSurvTrunkGroupNum) | + .4 avSurvTrunkTable | (indexes: avSurvTrunkRefNumber, | avSurvTrunkIndex) | + .5 avSurvArsTable | (index: avSurvDialIndex) | + .6 avSurvFacTable | (index: avSurvFacIndex) | + .7 avSurvIpVoiceCodecSetTable | (indexes: avSurvIpVoiceCodecSetNum,) | avSurvIpVoiceCodecSetIndex) | + .8 avSurvIpCodecSetConfig | | + .9 avSurvSlotConfigTable | (index: avSurvSlotConfigIndex) | + .10 avSurvDs1Table | (index: avSurvDs1Index) | + .11 avSurvSigGroupTable | (index: avSurvSigGroupIndex) | + .12 avSurvBriTable | (index: avSurvBriIndex) | + .13 avSurvIncomingRoutingTable | (indexes: avSurvIncomingRoutingGroupRefNumber, | avSurvIncomingRoutingIndex) | + .14 avSurvNfasTable | (indexes: avSurvNfasSigGroupRefNumber, | avSurvNfasIndex) | + .15 Add G430 values for avSurvMaxIPReg and avSurvBriIndex. | Change avSurvBriIndex to be 1..64 instead of 1..24.
     avSurvNotification 1.3.6.1.4.1.6889.2.6.4.0
         avSurvEnabled 1.3.6.1.4.1.6889.2.6.4.0.1
This trap indicates that survivability.o has been administratively enabled.
         avSurvDisabled 1.3.6.1.4.1.6889.2.6.4.0.2
This trap indicates that survivability.o has been administratively disabled.
         avSurvActive 1.3.6.1.4.1.6889.2.6.4.0.3
This trap indicates that survivability.o is now the call controller of record and is processing calls.
         avSurvInactive 1.3.6.1.4.1.6889.2.6.4.0.4
This trap indicates that survivability.o has stopped processing calls. A more powerful controller may have taken over, either an LSP or a primary call controller.
     avSurvConfig 1.3.6.1.4.1.6889.2.6.4.1
         avSurvAdminState 1.3.6.1.4.1.6889.2.6.4.1.1 integer read-write
Allows craft or PIM to enable the SLS call engine or read its current state Enumeration: 'disabled': 2, 'enabled': 1.
         avSurvStatus 1.3.6.1.4.1.6889.2.6.4.1.2 integer read-only
Current operational status of SLS call engine Enumeration: 'active': 1, 'inactive': 2.
         avSurvMaxIPReg 1.3.6.1.4.1.6889.2.6.4.1.3 integer32 read-write
Maximum IP phone registrations allowed. Gateway SLS firmware will restrict per model. G250 R3.0 = 10; G250 R3.1 and R4.0 = 12; G350 R4.0 = 72; IG550 [Juniper gateways(4350, 6350) R4.0 = 100; IG550 [Juniper gateways(2320, 2350) R4.1 = 100; G450 R4.1 =240 G430 = 150
         avSurvDateFormat 1.3.6.1.4.1.6889.2.6.4.1.4 integer read-write
Date Format. This is used for calendar/clock display on DCP & IP phones Enumeration: 'mmDdYy': 1, 'yyMmDd': 3, 'ddMmYy': 2.
         avSurvEndDLTimeStamp 1.3.6.1.4.1.6889.2.6.4.1.5 dateandtime read-write
Date/Timestamp of last download from PIM. This is written by PIM after it completes initialization of all configuration parameters
         avSurvNotificationSeverity 1.3.6.1.4.1.6889.2.6.4.1.6 integer read-only
Severity of last sent trap Enumeration: 'major': 4, 'indeterminate': 2, 'warning': 6, 'critical': 3, 'cleared': 1, 'minor': 5.
         avSurvConfigCommand 1.3.6.1.4.1.6889.2.6.4.1.7 integer read-write
Clear Running Configuration Command, write only Enumeration: 'clear': 1.
         avSurvGatewayNumber 1.3.6.1.4.1.6889.2.6.4.1.8 integer32 read-only
Gateway Identification Number (see CM Media Gateway form)
         avSurvPimLockout 1.3.6.1.4.1.6889.2.6.4.1.9 integer read-write
Allows Craft to prevent PIM updates from being downloaded during local diagnostic session Enumeration: 'disabled': 2, 'enabled': 1.
         avSurvAttendantAccessCode 1.3.6.1.4.1.6889.2.6.4.1.10 displaystring read-only
Allows a station in the branch office to be able to directly dial an attendant position
         avSurvAttendantExtension 1.3.6.1.4.1.6889.2.6.4.1.11 displaystring read-only
Specifies the station which shall serve as the branch office attendant position. Used as destination to direct un-routable incoming trunk calls.
     avSurvStationTable 1.3.6.1.4.1.6889.2.6.4.2 no-access
Station Table
         avSurvStationEntry 1.3.6.1.4.1.6889.2.6.4.2.1 no-access
Each entry contains index, extension number, type, interface bit map, COR, trunk-destination status, expansion-module, slot/port, switchhook-flash, IP address of registered station, and station name
             avSurvStationIndex 1.3.6.1.4.1.6889.2.6.4.2.1.1 integer32 read-only
Station Table Index
             avSurvStationExt 1.3.6.1.4.1.6889.2.6.4.2.1.2 displaystring read-only
Station Extension number
             avSurvStationType 1.3.6.1.4.1.6889.2.6.4.2.1.3 integer read-only
Station model type Enumeration: 'dcp8405Dplus': 44, 'ip4612': 6, 'dcp6402D': 31, 'dcp2410': 21, 'dcp6408': 32, 'dcp8405Bplus': 42, 'dcp8411D': 48, 'ip4620Sw': 8, 'dcp6402': 30, 'dcp6408plus': 33, 'ip4606': 4, 'ip4602': 2, 'ip4601': 1, 'dcp8411B': 47, 'dcp6416Dplus': 36, 'ip4625': 13, 'ip4624': 9, 'ip4621': 11, 'ip4620': 7, 'ip4622': 12, 'dcp6408Dplus': 35, 'ip4610Sw': 5, 'dcp2402': 20, 'analog2500': 10, 'dcp6424Dplus': 37, 'dcp2420': 22, 'dcp8405D': 43, 'ip4602Sw': 3, 'dcp8405B': 41, 'dcp8403B': 40, 'dcp8410B': 45, 'dcp8410D': 46, 'dcp8434D': 49, 'dcp6408D': 34.
             avSurvStationInterfaceIndex 1.3.6.1.4.1.6889.2.6.4.2.1.4 integer32 read-only
Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type. Note: This element has been deprecated in SLS R4.1. For legacy stations, use avSurvStationSlotPort to communicate slot-port info.
             avSurvStationCOR 1.3.6.1.4.1.6889.2.6.4.2.1.5 integer read-only
Station Class of Outgoing Restriction (COR) level Enumeration: 'unrestricted': 5, 'internal': 2, 'local': 3, 'emergency': 1, 'toll': 4.
             avSurvStationTrunkDest 1.3.6.1.4.1.6889.2.6.4.2.1.6 truthvalue read-only
Station trunk destination. Can be used to answer incomming trunk calls
             avSurvStationRowStatus 1.3.6.1.4.1.6889.2.6.4.2.1.7 rowstatus read-only
Create/Delete a row entry
             avSurvStationExpansionModule 1.3.6.1.4.1.6889.2.6.4.2.1.8 truthvalue read-only
Station set has an expansion module in place. This is only allowed for the digital phones (IP and DCP. IP phone models 4620, 4621, 4625 may use EU24 and EU24BL. DCP phone models 2420 may use EU24 and EU24BL. DCP phone models 6416 and 6424 may use modesl 801A and XM24.
             avSurvStationSlotPort 1.3.6.1.4.1.6889.2.6.4.2.1.9 displaystring read-only
CM slot/port in the Vyxx format
             avSurvStationSwitchHookFlash 1.3.6.1.4.1.6889.2.6.4.2.1.10 truthvalue read-only
Switchhook flash is allowed only for analog phones
             avSurvStationIpAddressRegistered 1.3.6.1.4.1.6889.2.6.4.2.1.11 octet string read-only
IP address of registered IP station. Note only for IP stations
             avSurvStationName 1.3.6.1.4.1.6889.2.6.4.2.1.12 displaystring read-only
Station or user's Name
     avSurvTrunkGroupTable 1.3.6.1.4.1.6889.2.6.4.3 no-access
Trunk Group Table
         avSurvTrunkGroupEntry 1.3.6.1.4.1.6889.2.6.4.3.1 no-access
Each entry contains index(ACM Trunk Group Number), trunk-type, Trunk Access Code, and dial-mode
             avSurvTrunkGroupNum 1.3.6.1.4.1.6889.2.6.4.3.1.1 integer read-only
Trunk Group Number
             avSurvTrunkGroupType 1.3.6.1.4.1.6889.2.6.4.3.1.2 integer read-only
Trunk Group Type Enumeration: 't1IsdnSignaling': 6, 'e1InBandSignaling': 7, 'analogGroundStart': 3, 'analogLoopStart': 1, 'e1IsdnSignaling': 8, 'bri': 4, 'analogDid': 2, 't1InBandSignaling': 5.
             avSurvTrunkGroupTAC 1.3.6.1.4.1.6889.2.6.4.3.1.3 displaystring read-only
Trunk Group Trunk Access Code (TAC)
             avSurvTrunkGroupDial 1.3.6.1.4.1.6889.2.6.4.3.1.4 integer read-only
Trunk Group Outward Dial. Note MF not supported in SLS Enumeration: 'mf': 3, 'rotary': 1, 'dtmf': 2.
             avSurvTrunkGroupRowStatus 1.3.6.1.4.1.6889.2.6.4.3.1.5 rowstatus read-only
Create/Delete a row entry
             avSurvTrunkGroupDidDigitTreatment 1.3.6.1.4.1.6889.2.6.4.3.1.6 integer read-only
Trunk Group DID digit treatment option. This applies for analog DID trunks and non-ISDN digital tie trunks. Note: blank means take no action. Enumeration: 'insert2': 12, 'insert3': 13, 'insert1': 11, 'insert4': 14, 'blank': 99, 'absorb2': 2, 'absorb3': 3, 'absorb1': 1, 'absorb4': 4, 'absorb5': 5.
             avSurvTrunkGroupDidDigitsInsert 1.3.6.1.4.1.6889.2.6.4.3.1.7 displaystring read-only
Digit string to be inserted for DID treatment This applies for analog DID trunks and non-ISDN digital tie trunks.
             avSurvTrunkGroupDidSupervision 1.3.6.1.4.1.6889.2.6.4.3.1.8 integer read-only
Type of incoming supervision used on DID trunk. This applies only for analog DID trunks. Enumeration: 'wink': 2, 'immediate': 1.
             avSurvTrunkGroupName 1.3.6.1.4.1.6889.2.6.4.3.1.9 displaystring read-only
Customer's name for trunk group
             avSurvTrunkGroupCodesetDisplay 1.3.6.1.4.1.6889.2.6.4.3.1.10 integer read-only
Which Q.931 codesets are allowed to send Display IE's to the user phones This applies only to ISDN BRI/PRI trunks. Enumeration: 'codeset0': 0, 'codeset7': 7, 'codeset6': 6.
             avSurvTrunkGroupCodesetNational 1.3.6.1.4.1.6889.2.6.4.3.1.11 integer read-only
Which codesets are allowed to send National supported IE's. This applies only to ISDN BRI/PRI trunks. Enumeration: 'codeset7': 7, 'codeset6': 6.
             avSurvTrunkGroupChannelPreference 1.3.6.1.4.1.6889.2.6.4.3.1.12 integer read-only
Used for encoding Channel-ID IE. This applies only to ISDN BRI/PRI trunks. Enumeration: 'exclusive': 1, 'preferred': 2.
             avSurvTrunkGroupDigitHandling 1.3.6.1.4.1.6889.2.6.4.3.1.13 integer read-only
Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks. Enumeration: 'overlapEnbloc': 2, 'enblocOverlap': 1, 'enblocEnbloc': 0, 'overlapOverlap': 3.
             avSurvTrunkGroupJapanDisconnect 1.3.6.1.4.1.6889.2.6.4.3.1.14 integer read-only
Send a Q.931 CONNECT msg right before sending DISCONNECT msg. This applies only to ISDN BRI/PRI trunks in Japan. Enumeration: 'yes': 1, 'no': 2.
             avSurvTrunkGroupSendName 1.3.6.1.4.1.6889.2.6.4.3.1.15 integer read-only
Specifies whether Calling, Connected, Called party's name is to be shared with network. This applies only to ISDN BRI/PRI trunks. Default is no. Enumeration: 'restricted': 3, 'yes': 1, 'no': 2.
             avSurvTrunkGroupSendCallingNumber 1.3.6.1.4.1.6889.2.6.4.3.1.16 integer read-only
Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. Default is no. Enumeration: 'restricted': 3, 'yes': 1, 'no': 2.
             avSurvTrunkGroupNumberingFormat 1.3.6.1.4.1.6889.2.6.4.3.1.17 integer read-only
Specifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. SLS only supports unknown(1) and public(2). Default is unknown. Enumeration: 'unknown': 1, 'public': 2, 'private': 3, 'unknownPrivate': 4.
             avSurvTrunkGroupIncomingDestination 1.3.6.1.4.1.6889.2.6.4.3.1.18 displaystring read-only
Analog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group calls
             avSurvTrunkGroupIncomingDialTone 1.3.6.1.4.1.6889.2.6.4.3.1.19 integer read-only
Analog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizure Enumeration: 'yes': 1, 'no': 2.
             avSurvTrunkGroupR2MFCSignaling 1.3.6.1.4.1.6889.2.6.4.3.1.20 integer read-only
Determines MFC signaling set to be used. This only applies to R2MFC trunks. This feature not supported in SLS for R4.0 Enumeration: 'set4': 4, 'set5': 5, 'set6': 6, 'set7': 7, 'set1': 1, 'set2': 2, 'set3': 3, 'set8': 8.
             avSurvTrunkGroupTrunkHunt 1.3.6.1.4.1.6889.2.6.4.3.1.21 integer read-only
Determines the method in which the SLS call engine selects from the trunk group pool of available trunks. This only applies to digital trunks. Enumeration: 'cyclical': 2, 'ascend': 1, 'descend': 3.
             avSurvTrunkGroupDs1Supervision 1.3.6.1.4.1.6889.2.6.4.3.1.22 integer read-only
Applies to non-ISDN DS1 trunks: Specifies the type of incomming/outgoing supervision that is used on these trunks. Enumeration: 'loopStart': 3, 'autoAuto': 9, 'immediateImmediate': 8, 'winkAuto': 7, 'winkWink': 5, 'winkImmediate': 6, 'groundStart': 4, 'autoWink': 10.
             avSurvTrunkGroupCbc 1.3.6.1.4.1.6889.2.6.4.3.1.23 integer read-only
Applies to ISDN DS1 trunks: Specifies whether the trunk is to operate in call-by-call basis. If yes, then send the NSF IE. Enumeration: 'yes': 1, 'no': 2.
             avSurvTrunkGroupCbcServiceFeature 1.3.6.1.4.1.6889.2.6.4.3.1.24 integer read-only
Applies to ISDN DS1 trunks: Specifies the type of service or feature specifed in the NSF IE for outbound trunk calls. Only valid if CBC=yes. Enumeration: 'megacom': 227, 'lds': 231, 'scocs': 246, 'operator': 197, 'sdn': 225, 'suboperator': 198.
             avSurvTrunkGroupCbcParameter 1.3.6.1.4.1.6889.2.6.4.3.1.25 integer read-only
Applies to ISDN DS1 trunks: Specifies the class of service being offered as part of Selective Class of Call Selection (scocs)service mode. Only valid if service mode is scocs.
             avSurvTrunkGroupBusyDisconnect 1.3.6.1.4.1.6889.2.6.4.3.1.26 integer read-only
Applies to Analog Loop Start Trunks: Specifies whether the presence of busy tone signal will cause the trunk call to be disconnected. Default = no. Enumeration: 'yes': 1, 'no': 2.
     avSurvTrunkTable 1.3.6.1.4.1.6889.2.6.4.4 no-access
Trunk table
         avSurvTrunkEntry 1.3.6.1.4.1.6889.2.6.4.4.1 no-access
Each entry contains dual index(group-reference-number and table index), interface bit map, slot-port, and sig-group reference-number
             avSurvTrunkGroupRefNumber 1.3.6.1.4.1.6889.2.6.4.4.1.1 integer read-only
Trunk Pool Group Reference Number - Association of trunk pool with trunk group
             avSurvTrunkIndex 1.3.6.1.4.1.6889.2.6.4.4.1.2 integer32 read-only
trunk table index
             avSurvTrunkInterfaceIndex 1.3.6.1.4.1.6889.2.6.4.4.1.3 integer32 read-only
Interface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type Note: This element has been deprecated in SLS R4.1. For legacy trunks, use avSurvTrunkSlotPort to communicate slot-port info.
             avSurvTrunkRowStatus 1.3.6.1.4.1.6889.2.6.4.4.1.4 rowstatus read-only
Create/Delete a row entry
             avSurvTrunkSlotPort 1.3.6.1.4.1.6889.2.6.4.4.1.5 displaystring read-only
ACM slot/port in the Vyxx format
             avSurvTrunkSigGroupRefNumber 1.3.6.1.4.1.6889.2.6.4.4.1.6 integer read-only
Signaling Group Number that is the manager of this ISDN trunk member
     avSurvArsTable 1.3.6.1.4.1.6889.2.6.4.5 no-access
Automatic Route Selection (ARS) Table
         avSurvArsEntry 1.3.6.1.4.1.6889.2.6.4.5.1 no-access
Each entry contains index, dial-string-pattern, dial-plan-type, max-length, group-reference-number, dial-action, delete-digits, insert-digits, and min-length
             avSurvDialIndex 1.3.6.1.4.1.6889.2.6.4.5.1.1 integer32 read-only
Call Pattern index
             avSurvDialString 1.3.6.1.4.1.6889.2.6.4.5.1.2 displaystring read-only
Dialed string entry that is used to match a pattern within the user-dialed number
             avSurvDialType 1.3.6.1.4.1.6889.2.6.4.5.1.3 integer read-only
Call Type Enumeration: 'service': 9, 'emergency': 1, 'national': 7, 'foreignNumberingPlanArea': 2, 'internationalOperator': 5, 'operator': 8, 'international': 4, 'local': 6, 'homeNumberingPlanArea': 3.
             avSurvDialMaximumLength 1.3.6.1.4.1.6889.2.6.4.5.1.4 integer read-only
Maximum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the dialed string
             avSurvDialGroupRefNumber 1.3.6.1.4.1.6889.2.6.4.5.1.5 integer read-only
Call group reference number
             avSurvDialAction 1.3.6.1.4.1.6889.2.6.4.5.1.6 integer read-only
Call dial action Enumeration: 'denyCall': 1, 'allowCall': 2.
             avSurvDialRowStatus 1.3.6.1.4.1.6889.2.6.4.5.1.7 rowstatus read-only
Create/Delete a row entry
             avSurvDialDeleteDigits 1.3.6.1.4.1.6889.2.6.4.5.1.8 integer read-only
Specifies the number of dialed digits to be deleted from the beginning of the string
             avSurvDialInsertDigits 1.3.6.1.4.1.6889.2.6.4.5.1.9 displaystring read-only
Specifies the digit string to be inserted. Includes ',' for pause.
             avSurvDialMinimumLength 1.3.6.1.4.1.6889.2.6.4.5.1.10 integer read-only
Minimum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the avSurvDialString element
     avSurvFacTable 1.3.6.1.4.1.6889.2.6.4.6 no-access
Automatic Route Selection Facility Table
         avSurvFacEntry 1.3.6.1.4.1.6889.2.6.4.6.1 no-access
Each entry contains index, an ARS Facility dialing code and the Type of FAC feature
             avSurvFacIndex 1.3.6.1.4.1.6889.2.6.4.6.1.1 integer32 read-only
Fac Index
             avSurvFacId 1.3.6.1.4.1.6889.2.6.4.6.1.2 displaystring read-only
ARS Facility dialing code
             avSurvFacRowStatus 1.3.6.1.4.1.6889.2.6.4.6.1.3 rowstatus read-only
Create/Delete a row entry
             avSurvFacType 1.3.6.1.4.1.6889.2.6.4.6.1.4 integer read-only
Feature Access Code(FAC) dial codes Supported Enumeration: 'contactPulse': 6, 'ars1': 1, 'ars2': 2, 'hold': 3, 'contactClose': 5, 'contactOpen': 4.
     avSurvIpVoiceCodecSetTable 1.3.6.1.4.1.6889.2.6.4.7 no-access
Ip Voice Codec Set Table
         avSurvIpVoiceCodecSetEntry 1.3.6.1.4.1.6889.2.6.4.7.1 no-access
Each entry contains dual index(cm-codec-set-num and table index), priority, codec-type, silence sup, number-of-frames
             avSurvIpVoiceCodecSetNum 1.3.6.1.4.1.6889.2.6.4.7.1.1 integer32 read-only
Ip Codec Set Identification
             avSurvIpVoiceCodecSetIndex 1.3.6.1.4.1.6889.2.6.4.7.1.2 integer32 read-only
Ip Codec Index
             avSurvIpVoiceCodecSetPriority 1.3.6.1.4.1.6889.2.6.4.7.1.3 integer read-only
Priority of codec set type (determines preferential use)
             avSurvIpVoiceCodecSetType 1.3.6.1.4.1.6889.2.6.4.7.1.4 integer read-only
Ip Codec Type Enumeration: 'g729': 4, 'g729a': 5, 'g729b': 6, 'g723': 3, 'g711': 1, 'g729ab': 7, 'g711a': 2.
             avSurvIpVoiceCodecSetSilence 1.3.6.1.4.1.6889.2.6.4.7.1.5 truthvalue read-only
IP Codec Silence Suppression
             avSurvIpVoiceCodecSetFrames 1.3.6.1.4.1.6889.2.6.4.7.1.6 integer read-only
IP Codec number of frames
             avSurvIpVoiceCodecSetRowStatus 1.3.6.1.4.1.6889.2.6.4.7.1.7 rowstatus read-only
Create/Delete a row entry
     avSurvIpCodecSetConfig 1.3.6.1.4.1.6889.2.6.4.8
         avSurvIpCodecSetFaxMode 1.3.6.1.4.1.6889.2.6.4.8.1 integer read-only
Fax operational protocol mode Enumeration: 'passthr': 3, 'off': 1, 't38': 4, 'relay': 2.
         avSurvIpCodecSetFaxRedundancy 1.3.6.1.4.1.6889.2.6.4.8.2 integer read-only
Redundant packets encoded during fax mode
         avSurvIpCodecSetModemMode 1.3.6.1.4.1.6889.2.6.4.8.3 integer read-only
Data modem protocol mode Enumeration: 'passthr': 3, 'off': 1, 'relay': 2.
         avSurvIpCodecSetModemRedundancy 1.3.6.1.4.1.6889.2.6.4.8.4 integer read-only
Redundant packets encoded for Modem mode
         avSurvIpCodecSetTtyMode 1.3.6.1.4.1.6889.2.6.4.8.5 integer read-only
TTY protocol mode Enumeration: 'passthr': 4, 'off': 1, 'uk': 3, 'us': 2.
         avSurvIpCodecSetTtyRedundancy 1.3.6.1.4.1.6889.2.6.4.8.6 integer read-only
Redundant packets encoded for TTY mode
         avSurvIpCodecSetClearChanMode 1.3.6.1.4.1.6889.2.6.4.8.7 integer read-only
Clear channel protocol mode. Preference for G711 wrapping Enumeration: 'disabled': 1, 'enabled': 2.
         avSurvIpCodecSetClearChanRedundancy 1.3.6.1.4.1.6889.2.6.4.8.8 integer read-only
Redundant packets encoded for clear channel mode
         avSurvIpCodecSetEncryptPriority1 1.3.6.1.4.1.6889.2.6.4.8.9 integer read-only
Media Encryption type - 1st priority Enumeration: 'aea': 2, 'aes': 1, 'none': 3.
         avSurvIpCodecSetEncryptPriority2 1.3.6.1.4.1.6889.2.6.4.8.10 integer read-only
Media Encryption type - 2nd priority Enumeration: 'aea': 2, 'unused': 4, 'aes': 1, 'none': 3.
         avSurvIpCodecSetEncryptPriority3 1.3.6.1.4.1.6889.2.6.4.8.11 integer read-only
Media Encryption type - 3rd priority Enumeration: 'aea': 2, 'unused': 4, 'aes': 1, 'none': 3.
     avSurvSlotConfigTable 1.3.6.1.4.1.6889.2.6.4.9 no-access
Slot Configuration Table
         avSurvSlotConfigEntry 1.3.6.1.4.1.6889.2.6.4.9.1 no-access
Each entry contains an index, number id, board type, and row status
             avSurvSlotConfigIndex 1.3.6.1.4.1.6889.2.6.4.9.1.1 integer32 read-only
Slot Config Table Index
             avSurvSlotConfigNumberId 1.3.6.1.4.1.6889.2.6.4.9.1.2 displaystring read-only
This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1
             avSurvSlotConfigBoardType 1.3.6.1.4.1.6889.2.6.4.9.1.3 integer read-only
Type of media module in the associated slot mm312 has 24 low-density DCP station ports mm710 has one DS1 interface mm711 has 8 port universal analog mm712 has 8 DCP station ports mm714 has 4 analog trunk ports and 4 analog station ports mm716 has 24 high-density analog station ports mm717 has 24 high-density DCP station ports mm720 has 8 bri trunk ports (16 channels) mm722 has 2 bri trunk ports (4 channels) anaImm1t2l is G250 Internal media module 1 Analog Trunk + 2 Analog Lines anaImm4t2l is G250 Internal media module 4 Analog Trunks + 2 Analog Lines briImm is G250 Internal media module 2 port BRI dcpImm is G250 Internal media module 12 port DCP ds1Imm is G250 Internal media module DS1 tgm550 is IG550 telephony gateway module with 2 Analog Trunks + 2 Analog Lines tim508 is IG550 telephony interface module 8 analog station ports tim510 is IG550 telephony interface module DS1 tim514 is IG550 telephony interface module 4 Analog Trunks + 2 Analog stations tim516 is IG550 telephony interface module 16 analog station ports tim518 is IG550 telephony interface module 8 analog stations and 8 analog trunks tim521 is IG550 telephony interface module 4 port BRI Enumeration: 'tim521': 26, 'tim508': 29, 'briImm': 17, 'ds1Imm': 19, 'mm712': 3, 'mm711': 4, 'mm710': 5, 'mm717': 14, 'mm716': 22, 'mm720': 2, 'mm714': 7, 'mm722': 8, 'anaImm1t2l': 9, 'tgm550': 23, 'mm312': 32, 'tim518': 31, 'tim516': 30, 'tim514': 24, 'anaImm4t2l': 16, 'tim510': 25, 'dcpImm': 18.
             avSurvSlotConfigRowStatus 1.3.6.1.4.1.6889.2.6.4.9.1.4 rowstatus read-only
Create/Delete a row entry in this table
     avSurvDs1Table 1.3.6.1.4.1.6889.2.6.4.10 no-access
DS1 trunk instantiation Table
           avSurvDs1Entry 1.3.6.1.4.1.6889.2.6.4.10.1 no-access
Each entry contains an index, name, bit-rate, signaling-mode, channel numbering, connect, interface, side, country-protocol, protocol-version, bearer-capability, interface-companding, long-timer, and slot-number-id.
               avSurvDs1Index 1.3.6.1.4.1.6889.2.6.4.10.1.1 integer32 read-only
DS1 Table Index
               avSurvDs1Name 1.3.6.1.4.1.6889.2.6.4.10.1.2 displaystring read-only
Name of the service provider and/or site destination of DS1 facility
               avSurvDs1BitRate 1.3.6.1.4.1.6889.2.6.4.10.1.3 integer read-only
Maximum transmission rate for DS1 interface Enumeration: 'rate2048': 2, 'rate1544': 1.
               avSurvDs1SignalingMode 1.3.6.1.4.1.6889.2.6.4.10.1.4 integer read-only
Selects the signaling method deployed on the given DS1 facility Enumeration: 'cas': 1, 'isdnExt': 4, 'isdnPri': 3, 'robbedBit': 2.
               avSurvDs1ChannelNumbering 1.3.6.1.4.1.6889.2.6.4.10.1.5 integer read-only
Channel numbering scheme; E1 interface for ETSI and QSIG requires sequential encoding from 1 to 30 Enumeration: 'sequential': 1, 'timeSlot': 2.
               avSurvDs1Connect 1.3.6.1.4.1.6889.2.6.4.10.1.6 integer read-only
Specifies what type of equipment is at the far end of the DS1 link Enumeration: 'host': 1, 'lineSide': 4, 'network': 2, 'pbx': 3.
               avSurvDs1Interface 1.3.6.1.4.1.6889.2.6.4.10.1.7 integer read-only
Determines glare handling Enumeration: 'peerSlave': 4, 'peerMaster': 3, 'user': 0, 'network': 1.
               avSurvDs1Side 1.3.6.1.4.1.6889.2.6.4.10.1.8 integer read-only
QSIG glare handling when interface field is peerSlave Enumeration: 'a': 0, 'b': 1.
               avSurvDs1CountryProtocol 1.3.6.1.4.1.6889.2.6.4.10.1.9 integer read-only
Specifies the Layer 3 signaling protocol used by the country-specific service provider. This applies to ISDN trunk. Enumeration: 'country18': 18, 'country19': 19, 'country10': 10, 'country11': 11, 'country12': 12, 'country13': 13, 'country14': 14, 'country15': 15, 'country16': 16, 'country17': 17, 'etsi': 62, 'country21': 21, 'country20': 20, 'country23': 23, 'country22': 22, 'country25': 25, 'country24': 24, 'country2': 2, 'country3': 3, 'country1': 1, 'country6': 6, 'country7': 7, 'country4': 4, 'country5': 5, 'qsig': 63, 'country8': 8, 'country9': 9.
               avSurvDs1ProtocolVersion 1.3.6.1.4.1.6889.2.6.4.10.1.10 integer read-only
Used in countries whose public networks allow multiple Layer-3 signaling protocols for ISDN PRI service. Enumeration: 'a': 0, 'c': 2, 'b': 1, 'd': 3.
               avSurvDs1BearerCapability 1.3.6.1.4.1.6889.2.6.4.10.1.11 integer read-only
Sets the information transfer capability in the Bearer Capability IE of SETUP message for ISDN PRI service. Enumeration: 'threeKhz': 0, 'speech': 1.
               avSurvDs1InterfaceCompanding 1.3.6.1.4.1.6889.2.6.4.10.1.12 integer read-only
Specifies the companding method used by the far-end switch Enumeration: 'ulaw': 2, 'alaw': 1.
               avSurvDs1LongTimer 1.3.6.1.4.1.6889.2.6.4.10.1.13 integer read-only
Specifies whether the duration of the T302 and T303 Q.931 timers should be extended to a longer duration. Used for Russia country code Enumeration: 'yes': 2, 'no': 1.
               avSurvDs1RowStatus 1.3.6.1.4.1.6889.2.6.4.10.1.14 rowstatus read-only
Create/Delete a row entry in this table
               avSurvDs1SlotNumberId 1.3.6.1.4.1.6889.2.6.4.10.1.15 displaystring read-only
This is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1
     avSurvSigGroupTable 1.3.6.1.4.1.6889.2.6.4.11 no-access
Signaling Group, associated with an ISDN trunk group, Table
           avSurvSigGroupEntry 1.3.6.1.4.1.6889.2.6.4.11.1 no-access
Each entry contains an index, channel selection, associated signaling, primary D channel, and row status
               avSurvSigGroupIndex 1.3.6.1.4.1.6889.2.6.4.11.1.1 integer32 read-only
SigGroup Table Index
               avSurvSigGroupChannelSelection 1.3.6.1.4.1.6889.2.6.4.11.1.2 integer read-only
If there is more than one trunk group assigned to this signaling group, the channel selection number is the trunk group that can accept incoming calls
               avSurvSigGroupAssociatedSignaling 1.3.6.1.4.1.6889.2.6.4.11.1.3 integer read-only
Specifies whether the D-channel is physically associated in the DS1 facility, yes = D-channel present Enumeration: 'yes': 1, 'no': 2.
               avSurvSigGroupPrimaryDChannel 1.3.6.1.4.1.6889.2.6.4.11.1.4 displaystring read-only
The identity for the D-channel 3 digit gw number + 2 character slot number + 2 digit port circuit number
               avSurvSigGroupRowStatus 1.3.6.1.4.1.6889.2.6.4.11.1.5 rowstatus read-only
Create/Delete a row entry in this table
     avSurvBriTable 1.3.6.1.4.1.6889.2.6.4.12 no-access
BRI trunk instantiation Table
           avSurvBriEntry 1.3.6.1.4.1.6889.2.6.4.12.1 no-access
Each entry contains an index, name, interface, side, country-protocol, bearer-capability, interface-companding, tei-assignment, directory-numberA, directory-numberB, spidA, spidB, endpoint-initialization, layer1-stable, and slot-number-id. This table instantiation completely specifies a BRI circuit, consisting of channel B1 and channel B2
               avSurvBriIndex 1.3.6.1.4.1.6889.2.6.4.12.1.1 integer32 read-only
BRI Table Index Note: G250-BRI supports 2 ports (4-channels) G350/IG550 is allocated a max of 24 ports (48-channels) G430/G450 is allocated a max of 64 ports (128 channels).
               avSurvBriName 1.3.6.1.4.1.6889.2.6.4.12.1.2 displaystring read-only
Name of the service provider and/or site destination of BRI facility
               avSurvBriInterface 1.3.6.1.4.1.6889.2.6.4.12.1.3 integer read-only
Determines glare handling. Non-QSIG calls: a-network, b-user; QSIG calls: a-peerMaster, b-peerSlave Enumeration: 'peerSlave': 4, 'peerMaster': 3, 'user': 0, 'network': 1.
               avSurvBriSide 1.3.6.1.4.1.6889.2.6.4.12.1.4 integer read-only
QSIG glare handling when interface field is peerSlave Enumeration: 'a': 0, 'b': 1.
               avSurvBriCountryProtocol 1.3.6.1.4.1.6889.2.6.4.12.1.5 integer read-only
Specifies the Layer 3 signaling protocol used by the country-specific service provider Enumeration: 'country18': 18, 'country19': 19, 'country10': 10, 'country11': 11, 'country12': 12, 'country13': 13, 'country14': 14, 'country15': 15, 'country16': 16, 'country17': 17, 'etsi': 62, 'country21': 21, 'country20': 20, 'country23': 23, 'country22': 22, 'country25': 25, 'country24': 24, 'country2': 2, 'country3': 3, 'country1': 1, 'country6': 6, 'country7': 7, 'country4': 4, 'country5': 5, 'qsig': 63, 'country8': 8, 'country9': 9.
               avSurvBriBearerCapability 1.3.6.1.4.1.6889.2.6.4.12.1.6 integer read-only
Sets the information transfer capability in the Bearer Capability IE of SETUP message Enumeration: 'threeKhz': 0, 'speech': 1.
               avSurvBriInterfaceCompanding 1.3.6.1.4.1.6889.2.6.4.12.1.7 integer read-only
Specifies the companding method used )for all circuits on this media module) by the far-end switch Enumeration: 'ulaw': 2, 'alaw': 1.
               avSurvBriTeiAssignment 1.3.6.1.4.1.6889.2.6.4.12.1.8 integer read-only
LAPD address assignment for TEI field, auto is assigned by network provider Enumeration: 'auto': 1, 'zero': 2.
               avSurvBriDirectoryNumberA 1.3.6.1.4.1.6889.2.6.4.12.1.9 displaystring read-only
Channel B1's directory number
               avSurvBriDirectoryNumberB 1.3.6.1.4.1.6889.2.6.4.12.1.10 displaystring read-only
Channel B2's directory number
               avSurvBriSpidA 1.3.6.1.4.1.6889.2.6.4.12.1.11 displaystring read-only
Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B1
               avSurvBriSpidB 1.3.6.1.4.1.6889.2.6.4.12.1.12 displaystring read-only
Service Provider Identifier required for Country Code 1 (USA) to be associated with channel B2
               avSurvBriEndpointInit 1.3.6.1.4.1.6889.2.6.4.12.1.13 integer read-only
Determines whether the far end supports endpoint initialization Enumeration: 'yes': 1, 'no': 2.
               avSurvBriLayer1Stable 1.3.6.1.4.1.6889.2.6.4.12.1.14 integer read-only
Determines whether to expect the network to drop BRI layer 1 when no calls are active. yes = keep layer 1 stable Enumeration: 'yes': 1, 'no': 2.
               avSurvBriRowStatus 1.3.6.1.4.1.6889.2.6.4.12.1.15 rowstatus read-only
Create/Delete a row entry in this table
               avSurvBriSlotPortNumberId 1.3.6.1.4.1.6889.2.6.4.12.1.16 displaystring read-only
This is the string identifier formed by the combination of the slot identifier that CM uses to identify the slot of the media gateway(first character is a v followed by one numeric character). The port consists of two numeric characters that identify the first B-channel of the physical BRI port circuit(for example the 1st port is always 01).
     avSurvIncomingRoutingTable 1.3.6.1.4.1.6889.2.6.4.13 no-access
Incoming Routing Table
           avSurvIncomingRoutingEntry 1.3.6.1.4.1.6889.2.6.4.13.1 no-access
Each entry contains a dual index(trunk-group-reference-number and table index), match-pattern, delete-digits, insert-digits specification and routing-mode. This table instantiation completely specifies an the digit handling for an incoming dial-string pattern. Note 1: If the trunk-group employs Overlap Receiving, there will only be one entry (this may only have a delete or an insert operand). Note 2: If the trunk-group employs Enbloc Receiving, there may be a maximum of 50 entries. Each entry will have a Match-pattern, Length, Delete, and Insert element.
               avSurvIncomingRoutingGroupRefNumber 1.3.6.1.4.1.6889.2.6.4.13.1.1 integer read-only
Incoming trunk-group reference number
               avSurvIncomingRoutingIndex 1.3.6.1.4.1.6889.2.6.4.13.1.2 integer32 read-only
Incoming Routing Table Index
               avSurvIncomingRoutingMatchPattern 1.3.6.1.4.1.6889.2.6.4.13.1.3 displaystring read-only
Dial-string entry that is used to match a pattern on inbound trunk calls. Note that '0' is used to designate the blank or empty string value as a wild card match.
               avSurvIncomingRoutingLength 1.3.6.1.4.1.6889.2.6.4.13.1.4 integer read-only
Maximum length of the user-dialed number that the SLS call-engine collects before beginning the pattern matching. Note that CM uses the blank as a wild card, subject to rule of the MatchPattern field being set to a wild card value as well. Enumeration: 'blank': 99, 'len3': 3, 'len2': 2, 'len1': 1, 'len0': 0, 'len7': 7, 'len6': 6, 'len5': 5, 'len4': 4, 'len9': 9, 'len8': 8, 'len20': 20, 'len21': 21, 'len17': 17, 'len16': 16, 'len15': 15, 'len14': 14, 'len13': 13, 'len12': 12, 'len11': 11, 'len10': 10, 'len19': 19, 'len18': 18.
               avSurvIncomingRoutingDeleteDigits 1.3.6.1.4.1.6889.2.6.4.13.1.5 integer read-only
Specifies the number of dialed digits to be deleted from the beginning of the incoming trunk's received digit string
               avSurvIncomingRoutingInsertDigits 1.3.6.1.4.1.6889.2.6.4.13.1.6 displaystring read-only
Specifies the digit string to be inserted (after the deletion process has been completed) to the incoming trunk digit string
               avSurvIncomingRoutingMode 1.3.6.1.4.1.6889.2.6.4.13.1.7 integer read-only
Defines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks. Enumeration: 'enbloc': 0, 'overlap': 1.
               avSurvIncomingRoutingRowStatus 1.3.6.1.4.1.6889.2.6.4.13.1.8 rowstatus read-only
Create/Delete a row entry in this table
     avSurvNfasTable 1.3.6.1.4.1.6889.2.6.4.14 no-access
Signaling Group Nfas , associated with an ISDN trunk group, Table
           avSurvNfasEntry 1.3.6.1.4.1.6889.2.6.4.14.1 no-access
Each entry contains a dual index(sig-group-reference-number and table index), interface string, interface id, and row status
               avSurvNfasSigGroupRefNumber 1.3.6.1.4.1.6889.2.6.4.14.1.1 integer read-only
Entry pointing to the associated signaling group number in the signaling group table
               avSurvNfasIndex 1.3.6.1.4.1.6889.2.6.4.14.1.2 integer32 read-only
Nfas Table Index
               avSurvNfasInterface 1.3.6.1.4.1.6889.2.6.4.14.1.3 displaystring read-only
The identity for the NFAS DS1 facility group: 3 digit gateway number + 2 character slot number
               avSurvNfasInterfaceId 1.3.6.1.4.1.6889.2.6.4.14.1.4 integer read-only
For an NFAS circuit, this specifies the identification number of the DS1 circuit that is associated with this NFAS group. Note that this ID number must be coordinated with the PSTN provider so that the signaling protocol will operate correctly with respect to physical facility circuit selection.
               avSurvNfasRowStatus 1.3.6.1.4.1.6889.2.6.4.14.1.5 rowstatus read-only
Create/Delete a row entry in this table