AVAYA-RTP-MIB: View SNMP OID List / Download MIB

VENDOR: AVAYA COMMUNICATION


 Home MIB: AVAYA-RTP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 avaya 1.3.6.1.4.1.6889
           mibs 1.3.6.1.4.1.6889.2
               avRtpMib 1.3.6.1.4.1.6889.2.7
This module defines an interface to RTP sessions QoS statistic gathering capabilities in Avaya's VoIP enabled devices. The MIB, designed for Avaya Services, allows operators to perform the following tasks: 1. View the statistics of recently terminated RTP session. 2. Define QoS related thresholds that define bad-QoS conditions. 3. View the statistics of last session, which experienced bad QoS. 4. Enable a special QoS trap that is sent upon termination of RTP session with bad QoS. 5. Enable a special QoS fault trap that is sent when more than N streams suffer from bad QoS. And a QoS clear trap that is sent when this fault conditions ends. 6. Configure the above traps rate limiting mechanism. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
                   avRtpNotification 1.3.6.1.4.1.6889.2.7.0
                       avRtpQoSTrap 1.3.6.1.4.1.6889.2.7.0.1
The trap contains QoS statistics for a single RTP session. The device can send this trap when an RTP session that experienced bad QoS terminates
                       avRtpQoSFault 1.3.6.1.4.1.6889.2.7.0.2
The trap indicates that more than XXX RTP sessions currently suffers from bad QoS.
                       avRtpQoSClear 1.3.6.1.4.1.6889.2.7.0.3
This trap indicates that a QoS fault, previously indicated by an avRtpQoSFault has cleared.
                       avRtpQoSInetTrap 1.3.6.1.4.1.6889.2.7.0.4
The trap contains QoS statistics for a single RTP session over IPv4/IPv6. The device can send this trap when an RTP session that experienced bad QoS terminates
                   avRtpConfig 1.3.6.1.4.1.6889.2.7.1
                       avRtpThresholdTable 1.3.6.1.4.1.6889.2.7.1.1 no-access
Thresholds configuration table
                           avRtpThresholdEntry 1.3.6.1.4.1.6889.2.7.1.1.1 no-access
Each entry contains one set of thresholds. In this version only one entry is supported (1).
                               avRtpThresholdSet 1.3.6.1.4.1.6889.2.7.1.1.1.1 integer32 read-only
The threshold set
                               avRtpThresholdMinStatWin 1.3.6.1.4.1.6889.2.7.1.1.1.2 integer read-write
The minimum number of observed RTP sequence numbers advance needed for the evaluation of packet loss.
                               avRtpThresholdRxCodecLoss 1.3.6.1.4.1.6889.2.7.1.1.1.3 avrtploss read-write
Codec packet loss i.e. the loss at the codec decoder. This threshold is evaluated once for each statistical interval (6-12 seconds)
                               avRtpThresholdRxAvgCodecLoss 1.3.6.1.4.1.6889.2.7.1.1.1.4 avrtploss read-write
Threshold on the avarage codec loss
                               avRtpThresholdRxCodecLossEv 1.3.6.1.4.1.6889.2.7.1.1.1.5 integer read-write
The device generates a QoS traps if avRtpThresholdRxCodecLoss was crossed avRtpThresholdRxCodecLossEv times during the session (0 means that no traps are sent for this threshold).
                               avRtpThresholdCodecRtt 1.3.6.1.4.1.6889.2.7.1.1.1.6 integer read-write
Codec round trip time threshold (an estimate for the overall RTT, including the internal delays). This threshold is evaluated each time an RTCP message is received (usually every 6-12 seconds)
                               avRtpThresholdCodecRttEv 1.3.6.1.4.1.6889.2.7.1.1.1.7 integer read-write
The device generates a QoS traps if avRtpThresholdCodecRtt was crossed avRtpThresholdCodecRttEv times during the session (0 means that no traps are sent for this threshold).
                               avRtpThresholdEcReturnLoss 1.3.6.1.4.1.6889.2.7.1.1.1.8 integer read-write
Echo Cancellation return loss in -dBm. High value (low absolute) means that a lot of energy is returned which can result in auditable echos. This threshold is evaluated once for each statistical interval (6-12 seconds)
                               avRtpThresholdEcReturnLossEv 1.3.6.1.4.1.6889.2.7.1.1.1.9 integer read-write
                               avRtpThresholdRxLoss 1.3.6.1.4.1.6889.2.7.1.1.1.10 avrtploss read-write
The received packet loss. This threshold is evaluated once for each statistical interval (6-12 seconds)
                               avRtpThresholdRxLossEv 1.3.6.1.4.1.6889.2.7.1.1.1.11 integer read-write
The device generates a QoS traps if avRtpThresholdRxCodecLoss was crossed avRtpThresholdRxCodecLossEv times during the session (0 means that no traps are sent for this threshold).
                               avRtpThresholdRemLoss 1.3.6.1.4.1.6889.2.7.1.1.1.12 avrtploss read-write
Remote peer packet loss threshold learnt from received RTCP reports. This threshold is evaluated once for each statistical interval (6-12 seconds)
                               avRtpThresholdRemLossEv 1.3.6.1.4.1.6889.2.7.1.1.1.13 integer read-write
                               avRtpThresholdAvgRxLoss 1.3.6.1.4.1.6889.2.7.1.1.1.14 avrtploss read-write
The received average packet loss. This threshold is evaluated at the end of the session.
                               avRtpThresholdAvgRemLoss 1.3.6.1.4.1.6889.2.7.1.1.1.15 avrtploss read-write
Threshold on the average remote packet loss, learnt from RTCP reports. This threshold is evaluated at the end of the session.
                               avRtpThresholdRxJitter 1.3.6.1.4.1.6889.2.7.1.1.1.16 integer read-write
A threshold on the received inter-arrival jitter, measured in milliseconds. This threshold is evaluated once for each statistical interval (6-12 seconds)
                               avRtpThresholdRxJitterEv 1.3.6.1.4.1.6889.2.7.1.1.1.17 integer read-write
                               avRtpThresholdRemJitter 1.3.6.1.4.1.6889.2.7.1.1.1.18 integer read-write
A threshold on the remote inter-arrival jitter, learnt from RTCP reports. This item is measured in milliseconds and is evaluated upon reception of an RTCP message.
                               avRtpThresholdRemJitterEv 1.3.6.1.4.1.6889.2.7.1.1.1.19 integer read-write
                               avRtpThresholdRtt 1.3.6.1.4.1.6889.2.7.1.1.1.20 integer read-write
A threshold on the network round-trip-time, measured in milliseconds. This item is evaluated upon reception of RTCP messages.
                               avRtpThresholdRttEv 1.3.6.1.4.1.6889.2.7.1.1.1.21 integer read-write
                               avRtpThresholdRxSsrcChangeEv 1.3.6.1.4.1.6889.2.7.1.1.1.22 integer read-write
The device would generate an end-of-session QoS trap if the number of observed SSRC changes was over this treshold.
                       avRtpEnable 1.3.6.1.4.1.6889.2.7.1.2 truthvalue read-write
Enable RTP statistic collection by the device. Note that statistic collection may cause minor performance hit.
                       avRtpQoSTrapEnable 1.3.6.1.4.1.6889.2.7.1.3 truthvalue read-write
EEnable the QoS-Trap generation.
                       avRtpQoSFaultTrapEnable 1.3.6.1.4.1.6889.2.7.1.4 truthvalue read-write
Enable the QoS-Trap generation.
                       avRtpQoSFaultTh 1.3.6.1.4.1.6889.2.7.1.5 integer read-write
The number of concurrent active RTP sessions that suffers from bad QoS (according to avRtpThresholds) that cause the device to enter a 'QoS fault' state. Note, upon entering this fault state, the device sends a avRtpQoSFault trap.
                       avRtpQoSClearTh 1.3.6.1.4.1.6889.2.7.1.6 integer read-write
The number of concurrent active RTP sessions that suffers from bad QoS (according to avRtpThresholds) that clears the 'QoS fault' state. Note, when the QoS fault clears, the device send a avRtpQoSClear trap.
                       avRtpTxQoSTraps 1.3.6.1.4.1.6889.2.7.1.7 counter32 read-only
The number of avRtpQoSTrap sent so far.
                       avRtpQoSTrapsDrop 1.3.6.1.4.1.6889.2.7.1.8 counter32 read-only
The number of avRtpQoSTraps that were dropped by the rate limiter
                       avRtpQoSTrapTokenInterval 1.3.6.1.4.1.6889.2.7.1.9 timeinterval read-write
Configure the QoS trap token-bucket rate limiter. This item sets the token interval in hundredth of seconds.
                       avRtpQoSTrapBucketSize 1.3.6.1.4.1.6889.2.7.1.10 integer read-write
Configure the QoS trap token-bucket rate limiter. This item configures the bucket-size.
                       avRtpDateAndTime 1.3.6.1.4.1.6889.2.7.1.11 dateandtime read-only
The current RTC date and Time
                       avRtpMaxSessionTableSize 1.3.6.1.4.1.6889.2.7.1.12 integer32 read-only
The maximum number of rows of the session table
                       avRtpReservedSessionTableRows 1.3.6.1.4.1.6889.2.7.1.13 integer32 read-only
The number of rows in session table reserved for terminated sessions that had QoS events
                       avRtpClear 1.3.6.1.4.1.6889.2.7.1.14 truthvalue read-write
Clear the Session table
                       avRtpFaultMask 1.3.6.1.4.1.6889.2.7.1.15 octet string read-only
Fault mask enables Avaya Fault-Mon to poll the device status Bit 0 - Set if there is a fault condition according to avRtpQoSFaultTh/avRtpQoSClearTh
                   avRtpSessionTable 1.3.6.1.4.1.6889.2.7.2 no-access
This table contains statistics for recently terminated RTP flows.
                       avRtpSessionEntry 1.3.6.1.4.1.6889.2.7.2.1 no-access
Each row contains information from a single RTP session. Rows are removed when the space limits are reached (avRtpSessionTableSize). There are avRtpSessionTableReservedRows reserved rows for terminated sessions that had QoS events. Sessions that had QoS events might appear twice in the table, e.g. once with AvRtpSessionState = terminated and once with terminatedWithEvent.
                           avRtpSessionState 1.3.6.1.4.1.6889.2.7.2.1.1 integer read-only
An arbitrary RTP-flow sequence number, serves as the MIB tables index Enumeration: 'active': 1, 'activeWithEvent': 2, 'terminatedWithEvent': 4, 'terminated': 3.
                           avRtpSessionID 1.3.6.1.4.1.6889.2.7.2.1.2 integer32 read-only
An arbitrary RTP-flow sequence number, serves as the MIB tables index
                           avRtpSessionEngineID 1.3.6.1.4.1.6889.2.7.2.1.3 integer32 read-only
The number of the VoIP engine responsible for the RTP stream. More information about the specific VoIP engine can be found in avRtpSumTable
                           avRtpSessionLocAddrType 1.3.6.1.4.1.6889.2.7.2.1.4 inetaddresstype read-only
This item specifies whether the IP addresses in this row are in IPv6 or in IPv4 format (See RFC3291)
                           avRtpSessionLocAddr 1.3.6.1.4.1.6889.2.7.2.1.5 inetaddress read-only
The RTP stream local RTP address.
                           avRtpSessionLocAddrV4 1.3.6.1.4.1.6889.2.7.2.1.6 ipaddress read-only
The RTP stream local RTP address (IPv4).
                           avRtpSessionLocAddrV6 1.3.6.1.4.1.6889.2.7.2.1.7 inetaddressipv6 read-only
The RTP stream local RTP address (IPv6).
                           avRtpSessionRemAddrType 1.3.6.1.4.1.6889.2.7.2.1.8 inetaddresstype read-only
This item specifies whether the remote IP addresses in this row is in IPv6 or in IPv4 format (See RFC3291)
                           avRtpSessionRemAddr 1.3.6.1.4.1.6889.2.7.2.1.9 inetaddress read-only
The RTP stream remote peer address
                           avRtpSessionRemAddrV4 1.3.6.1.4.1.6889.2.7.2.1.10 ipaddress read-only
The RTP stream Remote RTP address (IPv4).
                           avRtpSessionRemAddrV6 1.3.6.1.4.1.6889.2.7.2.1.11 inetaddressipv6 read-only
The RTP stream Remote RTP address (IPv6).
                           avRtpSessionLocPort 1.3.6.1.4.1.6889.2.7.2.1.12 inetportnumber read-only
The RTP stream local UDP port
                           avRtpSessionRemPort 1.3.6.1.4.1.6889.2.7.2.1.13 inetportnumber read-only
The RTP stream remote UDP port
                           avRtpSessionStartTime 1.3.6.1.4.1.6889.2.7.2.1.14 dateandtime read-only
The stream start time
                           avRtpSessionEndTime 1.3.6.1.4.1.6889.2.7.2.1.15 dateandtime read-only
The stream end time
                           avRtpSessionDuration 1.3.6.1.4.1.6889.2.7.2.1.16 timeinterval read-only
The duration of the stream in hundredth of seconds
                           avRtpSessionCname 1.3.6.1.4.1.6889.2.7.2.1.17 displaystring read-only
The RTP canonical name of the gateway
                           avRtpSessionPhone 1.3.6.1.4.1.6889.2.7.2.1.18 displaystring read-only
A string containing the phone extensions (received for CM), in the format of :...
                           avRtpSessionSeverity 1.3.6.1.4.1.6889.2.7.2.1.19 integer read-only
The QoS problem severity for the stream. This item equals to 'warning' if a trap was suppose to be sent. and 'cleared' otherwise. Enumeration: 'major': 4, 'indeterminate': 2, 'warning': 6, 'critical': 3, 'cleared': 1, 'minor': 5.
                           avRtpSessionTxLen 1.3.6.1.4.1.6889.2.7.2.1.20 integer32 read-only
The transmitted RTP packet size
                           avRtpSessionType 1.3.6.1.4.1.6889.2.7.2.1.21 integer read-only
This value describes the session type. It holds the RTP type for RTP streams and unique items (above 127) for non-RTP or dynamically allocated types Enumeration: 'g728': 15, 'g729': 18, 'modemRelay': 133, 'ttyPassThr': 132, 'faxPassThr': 130, 'clearChannel': 135, 'g722': 9, 'g723': 4, 'g711': 0, 't38fax': 129, 'g729ab': 137, 'ttyRelay': 131, 'g729b': 138, 'unspecified': 255, 'g729a': 136, 'g711a': 8, 'g726a32': 139, 'avayaFaxRelay': 128, 'modemPassThr': 134.
                           avRtpSessionTxInterval 1.3.6.1.4.1.6889.2.7.2.1.22 integer32 read-only
The interval (in milliseconds) between RTP packets.
                           avRtpSessionTxEncryp 1.3.6.1.4.1.6889.2.7.2.1.23 integer read-only
The Media Encryption metric indicates what kind media encryption is ,if any, is used for the RTP session. This information is valuable because: 1) media-encryption consumes more VoIP resources 2) Encryption key infrastructure may cause problems encryptionOff(0) - Encryption is off encryptionAEAv2(1) - Avaya Proprietary AEAv2 encryption encryptionAES(2) - Avaya Proprietary AES encryption Standard Encryption (Secure RTP): srtpAesCm128(4) - Counter Mode 128 AES encryption, no authentication srtpAesCm128HmacSha180(5) - AES encryption, 80bit SHA1 authentication srtpAesCm128HmacSha132(6) - AES encryption, 32bit SHA1 authentication srtpF8128HmacSha180(7) - F8 encryption, 80bit SHA1 authentication srtpHmacSha180(8) - No encryption, 80bit SHA1 authentication srtpHmacSha132(9) - No encryption, 32bit SHA1 authentication Enumeration: 'encryptionAEAv2': 1, 'srtp': 10, 'unknown': -1, 'srtpAesCm128': 4, 'srtpHmacSha132': 9, 'srtpAesCm128HmacSha180': 5, 'encryptionOff': 0, 'encryptionAES': 2, 'srtpHmacSha180': 8, 'srtpAesCm128HmacSha132': 6, 'srtpF8128HmacSha180': 7.
                           avRtpSessionTxDscp 1.3.6.1.4.1.6889.2.7.2.1.24 integer read-only
The last transmitted IP DSCP. This value may change during the call according to the RSVP status.This information is valuable because routers may give different priority to packets according to their DSCP value
                           avRtpSessionTxVlan 1.3.6.1.4.1.6889.2.7.2.1.25 integer read-only
The VLAN on which the RTP packets are transmitted. Minus one means 'unknown'
                           avRtpSessionTxL2Pri 1.3.6.1.4.1.6889.2.7.2.1.26 integer read-only
The Layer 2 (e.g. IEEE 802.1p) priority of the sent Ethernet frames. Minus 1 means unknown. This information is valuable because Ethernet switches can give frames different priority according to their 802.1p value
                           avRtpSessionTxSilenceSupp 1.3.6.1.4.1.6889.2.7.2.1.27 avrtpsilencesupp read-only
Silence suppression state.noRtp means that a simple silence suppression scheme was used i.e. without RTP packets on silence. Complex means that a combination of silence packets and 'no RTP on Silence' is usedThis information is valuable because: 1) silence suppression can save upto %60 bandwidth 2) Silence suppression influences user experience (especially if the terminals does not generate confort-noise)
                           avRtpSessionTxSsrc 1.3.6.1.4.1.6889.2.7.2.1.28 unsigned32 read-only
The transmitted RTP stream SSRC.This value can be used to locate a stream in a packet capture.
                           avRtpSessionTxRsvp 1.3.6.1.4.1.6889.2.7.2.1.29 integer read-only
The RSVP status for the stream. This information is valuable because: 1) Routers may reserve bandwidth to for the stream. 2) Avaya VoIP endpoints changes the transmitted DSCP according to the RSVP status. Enumeration: 'unused': 0, 'disabled': 1, 'reserved': 4, 'pending': 2, 'failed': 3.
                           avRtpSessionTxResvFail 1.3.6.1.4.1.6889.2.7.2.1.30 gauge32 read-only
The number of times the RSVP reservation has failed. This item is init to one if RSVP is in-use.
                           avRtpSessionStatInterval 1.3.6.1.4.1.6889.2.7.2.1.31 timeinterval read-only
The thresholds are evaluated periodically, usually each time an RTCP message is being sent.
                           avRtpSessionRxCodecPlayTime 1.3.6.1.4.1.6889.2.7.2.1.32 counter32 read-only
The time the codec has played frames (not including silence suppression or fill frames)
                           avRtpSessionRxCodecLossCount 1.3.6.1.4.1.6889.2.7.2.1.33 counter32 read-only
The total codec loss time in milliseconds
                           avRtpSessionRxCodecLoss 1.3.6.1.4.1.6889.2.7.2.1.34 avrtploss read-only
The codec loss during the last Statistical interval, in 1/1000 units. The codec loss is the number of fill period divided by the statistical interval. The fill period is the duration of time that the codec had to send data to the digital to analog converter, but no codec frames were available in the jitter buffer. This is a measure for the overall packet loss after the jitter and resequencing re sequencing buffers.
                           avRtpSessionRxAvgCodecLoss 1.3.6.1.4.1.6889.2.7.2.1.35 avrtploss read-only
The total codec loss during the session.
                           avRtpSessionRxCodecLossEv 1.3.6.1.4.1.6889.2.7.2.1.36 counter32 read-only
The number of times codec loss was sampled over the threshold
                           avRtpSessionRxLoss 1.3.6.1.4.1.6889.2.7.2.1.37 avrtploss read-only
The received network loss in the last statistical interval (in 1/1000 units).
                           avRtpSessionRxAvgLoss 1.3.6.1.4.1.6889.2.7.2.1.38 avrtploss read-only
The total network loss during the session (in 1/1000 units).
                           avRtpSessionRxLossEv 1.3.6.1.4.1.6889.2.7.2.1.39 counter32 read-only
The number of times network loss was sampled over the threshold
                           avRtpSessionRx 1.3.6.1.4.1.6889.2.7.2.1.40 counter32 read-only
The total number of received RTP packets
                           avRtpSessionRxLossCount 1.3.6.1.4.1.6889.2.7.2.1.41 counter32 read-only
The total number of lost packets
                           avRtpSessionRxSeqFall 1.3.6.1.4.1.6889.2.7.2.1.42 counter32 read-only
The total number of sequence fall events
                           avRtpSessionRxDup 1.3.6.1.4.1.6889.2.7.2.1.43 counter32 read-only
The total number of received duplicate packets. This item may indicate transient routing loop
                           avRtpSessionRxJBufUnderruns 1.3.6.1.4.1.6889.2.7.2.1.44 gauge32 read-only
The duration of jitter buffer under runs during the call in milliseconds (i.e. buffer empty when a frame is needed by the codec).
                           avRtpSessionRxJBufOverruns 1.3.6.1.4.1.6889.2.7.2.1.45 gauge32 read-only
The duration of time in codec frames that were dropped due to jitter buffer overruns in milliseconds (i.e. jitter buffer is full)
                           avRtpSessionRxJBufDelay 1.3.6.1.4.1.6889.2.7.2.1.46 integer32 read-only
The last jitter buffer delay in milliseconds.
                           avRtpSessionRxMaxJBufDelay 1.3.6.1.4.1.6889.2.7.2.1.47 integer32 read-only
The maximum jitter buffer delay during the call (in milliseconds)
                           avRtpSessionRxJitter 1.3.6.1.4.1.6889.2.7.2.1.48 integer32 read-only
The last/current received RTP jitter
                           avRtpSessionRxAvgJitter 1.3.6.1.4.1.6889.2.7.2.1.49 integer32 read-only
The average received RTP jitter
                           avRtpSessionRxJitterEv 1.3.6.1.4.1.6889.2.7.2.1.50 counter32 read-only
The number of times, jitter was sampled over the threshold.
                           avRtpSessionRxTtl 1.3.6.1.4.1.6889.2.7.2.1.51 integer read-only
The current/last received TTL value (IP Time To Live)
                           avRtpSessionRxMinTtl 1.3.6.1.4.1.6889.2.7.2.1.52 integer read-only
The minimum received TTL value. The technician can use this value as a hint to what was the IP route during the session.
                           avRtpSessionRxMaxTtl 1.3.6.1.4.1.6889.2.7.2.1.53 integer read-only
The maximum received TTL value. Difference between this value and avRtpSessionRxMinTtl may indicate route changes during the call.
                           avRtpSessionRxDscp 1.3.6.1.4.1.6889.2.7.2.1.54 integer read-only
The last received DSCP value.
                           avRtpSessionRxL2Pri 1.3.6.1.4.1.6889.2.7.2.1.55 integer read-only
The last received L2 priority (IEEE 802.1p, Ethernet priority)
                           avRtpSessionRxSilenceSupp 1.3.6.1.4.1.6889.2.7.2.1.56 avrtpsilencesupp read-only
The observed (received) silence suppression technique.
                           avRtpSessionRxSsrc 1.3.6.1.4.1.6889.2.7.2.1.57 unsigned32 read-only
The last received RTP SSRC value
                           avRtpSessionRxSsrcChange 1.3.6.1.4.1.6889.2.7.2.1.58 counter32 read-only
Counts the number of observed SSRC changes during the call. This may indicate a remote VoIP engine fail-over event.
                           avRtpSessionTxRtcp 1.3.6.1.4.1.6889.2.7.2.1.59 counter32 read-only
The total number of transmitted RTCP reports
                           avRtpSessionRxRtcp 1.3.6.1.4.1.6889.2.7.2.1.60 counter32 read-only
The total number of received RTCP reports
                           avRtpSessionCodecRtt 1.3.6.1.4.1.6889.2.7.2.1.61 integer32 read-only
The Estimated analog overall round-trip time calculated from the last received RTCP packet. The estimate value include the network delay plus the internal delays plus an estimate for the remote internal delay. This value is measured in milliseconds.
                           avRtpSessionAvgCodecRtt 1.3.6.1.4.1.6889.2.7.2.1.62 integer32 read-only
The Avarage Estimated analog overall RTT (including internal delays) during the session.
                           avRtpSessionCodecRttEv 1.3.6.1.4.1.6889.2.7.2.1.63 counter32 read-only
The number of times the Estimated analog codec RTT was over the threshold
                           avRtpSessionRtt 1.3.6.1.4.1.6889.2.7.2.1.64 integer32 read-only
The last RTT value in milliseconds. RTT is learnt from RTCP reports
                           avRtpSessionAvgRtt 1.3.6.1.4.1.6889.2.7.2.1.65 integer32 read-only
The average RTT during the RTP sessions
                           avRtpSessionRttEv 1.3.6.1.4.1.6889.2.7.2.1.66 counter32 read-only
The number of received RTCP packets which has indicated that RTT was over the threshold.
                           avRtpSessionRemLoss 1.3.6.1.4.1.6889.2.7.2.1.67 avrtploss read-only
The last known remote loss (learnt from received RTCP message)
                           avRtpSessionRemAvgLoss 1.3.6.1.4.1.6889.2.7.2.1.68 avrtploss read-only
The last known remote loss (learnt from received RTCP message)
                           avRtpSessionRemLossEv 1.3.6.1.4.1.6889.2.7.2.1.69 counter32 read-only
The number of received RTCP packets which has indicated that loss, at the remote peer, was over the threshold..
                           avRtpSessionRemJitter 1.3.6.1.4.1.6889.2.7.2.1.70 integer32 read-only
The last known remote jitter, learnt from RTCP.
                           avRtpSessionRemAvgJitter 1.3.6.1.4.1.6889.2.7.2.1.71 integer32 read-only
The average remote jitter, learnt from RTCP.
                           avRtpSessionRemJitterEv 1.3.6.1.4.1.6889.2.7.2.1.72 counter32 read-only
The number of received RTCP messages, which have indicated that loss was over the threshold.
                           avRtpSessionEcTailLen 1.3.6.1.4.1.6889.2.7.2.1.73 integer32 read-only
The current/last echo cancellation tail length.
                           avRtpSessionEcReturnLoss 1.3.6.1.4.1.6889.2.7.2.1.74 integer read-only
The last sampled Echo Cancellation return loss.
                           avRtpSessionEcReturnLossEv 1.3.6.1.4.1.6889.2.7.2.1.75 counter32 read-only
The number of time the echo cancellation return loss was sampled over the threshold. This value is sampled every avRtpSessionStatInerval
                           avRtpSessionAEC 1.3.6.1.4.1.6889.2.7.2.1.76 integer read-only
Acoustic echo cancellation state, relevant for speaker phones Enumeration: 'none': 1, 'notSupported': 0, 'fullDuplex': 3, 'aec': 4, 'halfDuplex': 2.
                           avRtpSessionDebugStr 1.3.6.1.4.1.6889.2.7.2.1.77 displaystring read-only
This string contains the major metrics in human readable form. It is used by the QoS trap.
                           avRtpSessionTxFlowLabel 1.3.6.1.4.1.6889.2.7.2.1.78 integer read-only
The last transmitted IPv6 Flow Label. This metric represents the most recently transmitted IPv6 Flow Label field in the IPv6 RTP stream. The value fits in a 20-bit integer and is reset to zero et the start of each new RTP session.
                           avRtpSessionRxFlowLabel 1.3.6.1.4.1.6889.2.7.2.1.79 integer read-only
The last Received IPv6 Flow Label. This metric represents the value of the IPv6 Flow Label field of the incoming RTP packets. The Received IPv6 Flow Label metric is a 20-bit integer. The metric is set with the first IPv6 RTP packet received, and updated when the value has changed from the previously reported value.
                   avRtpSumTable 1.3.6.1.4.1.6889.2.7.3 no-access
This table contains summary of sessions and QoS events for each VoIP engine.
                       avRtpSumEntry 1.3.6.1.4.1.6889.2.7.3.1 no-access
                           avRtpSumEngineID 1.3.6.1.4.1.6889.2.7.3.1.1 integer32 read-only
VoIP engine identifier. Usually, the VoIP engine slot number.
                           avRtpSumEngineDescr 1.3.6.1.4.1.6889.2.7.3.1.2 displaystring read-only
A string describing the VoIP engine. Equals to entPhysicalDescr or cmgModuleDescription
                           avRtpSumPeriod 1.3.6.1.4.1.6889.2.7.3.1.3 timeinterval read-only
The time since the summary counters were cleared.
                           avRtpSumActiveFlows 1.3.6.1.4.1.6889.2.7.3.1.4 integer32 read-only
The number of active flows
                           avRtpSumActiveQosEvents 1.3.6.1.4.1.6889.2.7.3.1.5 integer32 read-only
The number of flows that currently suffers from QoS problems.
                           avRtpSumTotalFlows 1.3.6.1.4.1.6889.2.7.3.1.6 counter32 read-only
The total number of flows
                           avRtpSumTotalFlowsQoSEvents 1.3.6.1.4.1.6889.2.7.3.1.7 counter32 read-only
The total number of flows that had QoS events
                           avRtpSumTxTTL 1.3.6.1.4.1.6889.2.7.3.1.8 integer read-only
TTL of transmitted RTP packets.
                           avRtpSumSessionDuration 1.3.6.1.4.1.6889.2.7.3.1.9 counter32 read-only
Total duration of the sessions in seconds
                           avRtpSumClear 1.3.6.1.4.1.6889.2.7.3.1.10 truthvalue read-write
Clear the summary counters
                   avRtpLookupTable 1.3.6.1.4.1.6889.2.7.4 no-access
This virtual table is used for finding a specific SessionIDs based on the remote address and call state.
                       avRtpLookupEntry 1.3.6.1.4.1.6889.2.7.4.1 no-access
                           avRtpLookupStartTime 1.3.6.1.4.1.6889.2.7.4.1.1 dateandtime read-only
The stream start time
                   avRtpNotificationVarbinds 1.3.6.1.4.1.6889.2.7.5
Notify only varbinds used for notifications in avRtpNotification group
                       avRtpSessionLocInetAddrType 1.3.6.1.4.1.6889.2.7.5.1 inetaddresstype no-access
The RTP stream local RTP address Type (IPv4/IPv6).
                       avRtpSessionLocInetAddr 1.3.6.1.4.1.6889.2.7.5.2 inetaddress no-access
The RTP stream local RTP address (IPv4/IPv6).
                       avRtpSessionRemInetAddrType 1.3.6.1.4.1.6889.2.7.5.3 inetaddresstype no-access
The RTP stream remote RTP address Type (IPv4/IPv6).
                       avRtpSessionRemInetAddr 1.3.6.1.4.1.6889.2.7.5.4 inetaddress no-access
The RTP stream remote RTP address (IPv4/IPv6).