ATTO6500N-MIB: View SNMP OID List / Download MIB

VENDOR: ATTO TECHNOLOGY


 Home MIB: ATTO6500N-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 attotech 1.3.6.1.4.1.4547
           attoProducts 1.3.6.1.4.1.4547.1
           attoMgmt 1.3.6.1.4.1.4547.2
               bridge 1.3.6.1.4.1.4547.2.3
ATTO 6500N Custom MIB
                   bridgeTraps 1.3.6.1.4.1.4547.2.3.0
                       bridgeTemperatureWarning 1.3.6.1.4.1.4547.2.3.0.1
Supports notification of over/under temperature warnings. The following information is returned: tempStatus - the current temperature status (normal, warning, critical) Where normal indicates the temperature is within the safe range. Warning indicates the warning threshold has been reached. Critical indicates that the temperature is outside the safe range. temperature - current temperature of the sensor Recommended severity level (for filtering): warning
                       fcPortTransition 1.3.6.1.4.1.4547.2.3.0.2
Supports notification of fibre channel port connectivity changes. The following information is returned: fcPortPortNumber - the description of the port fcPortOperationalState - the current port state Recommended severity level (for filtering): informational
                       sasPortTransition 1.3.6.1.4.1.4547.2.3.0.3
Supports notification of SAS port connectivity changes. The following information is returned: sasPortPortNumber - the description of the port sasPortOperationalState - the current port state Recommended severity level (for filtering): informational
                       bridgeThroughputWarning 1.3.6.1.4.1.4547.2.3.0.4
Supports notification of max-throughput warning indicating a potential data bottleneck. Data throughput is measured as aggregate completed I/O's per second on the Fibre Channel interfaces. The following information is returned: ChassisthroughputStatus - the current throughput status normal : no data bottleneck. warning: aggregate fibre channel throughput has exceeded 50,000 IOPS. Recommended severity level (for filtering): informational
                   bridgeIdentity 1.3.6.1.4.1.4547.2.3.1
                       bridgeUniqueId 1.3.6.1.4.1.4547.2.3.1.1 displaywwn read-only
8-octets uniquely identifying this HW element.
                       vendorID 1.3.6.1.4.1.4547.2.3.1.2 displaystring read-only
Vendor ID for this HW element.
                       modelName 1.3.6.1.4.1.4547.2.3.1.3 displaystring read-only
Product/Model name of this HW element.
                       primaryFirmwareRevision 1.3.6.1.4.1.4547.2.3.1.4 displaystring read-only
Build Number, Version Number and Base Version for the firmware on the primary partition (active firmware image).
                       primaryFirmwareBuildDate 1.3.6.1.4.1.4547.2.3.1.5 dateandtime read-only
Active firmware image build date and time (no time zone offset).
                       hardwareVersion 1.3.6.1.4.1.4547.2.3.1.6 integer32 read-only
Current version of 6500N hardware.
                       secondaryFirmwareRevision 1.3.6.1.4.1.4547.2.3.1.7 displaystring read-only
Version Number and Build Number for the firmware on the secondary partition (backup firmware image).
                       secondaryFirmwareBuildDate 1.3.6.1.4.1.4547.2.3.1.8 dateandtime read-only
Backup Firmware image build date and time (no time zone offset).
                       serialNumber 1.3.6.1.4.1.4547.2.3.1.9 displaystring read-only
Serial Number of this HW element.
                       bridgeName 1.3.6.1.4.1.4547.2.3.1.10 displaystring read-only
User defined symbolic name assigned to this HW element.
                   bridgeChassis 1.3.6.1.4.1.4547.2.3.2
                       lastReboot 1.3.6.1.4.1.4547.2.3.2.1 dateandtime read-only
Date and time of last reboot.
                       uptime 1.3.6.1.4.1.4547.2.3.2.2 timeinterval read-only
Time since last reboot, in units of 0.01 seconds
                       lastRebootReason 1.3.6.1.4.1.4547.2.3.2.3 displaystring read-only
Plain text reason for last reboot.
                       minimumOperatingTemp 1.3.6.1.4.1.4547.2.3.2.4 integer32 read-only
Minimum Safe Operating Temperature, in degrees C
                       maximumOperatingTemp 1.3.6.1.4.1.4547.2.3.2.5 integer32 read-only
Maximum Safe Operating Temperature, in degrees C
                       temperatureHighAlertSetting 1.3.6.1.4.1.4547.2.3.2.6 integer32 read-only
High temperature warning threshold, in degrees C
                       temperatureLowAlertSetting 1.3.6.1.4.1.4547.2.3.2.7 integer32 read-only
Low temperature warning threshold, in degrees C
                       chassisTemperature 1.3.6.1.4.1.4547.2.3.2.8 integer32 read-only
Current Chassis Temperature, in degrees C
                       chassisTemperatureStatus 1.3.6.1.4.1.4547.2.3.2.9 integer read-only
The current sensor status (normal, warning or critical). Normal indicates the temperature for this HW element is within the safe range. Warning indicates that the temperature for this HW element has passed the warning threshold but is still within the safe range. Critical indicates that the temperature for this HW element is not within the safe operating temperature range. Enumeration: 'warning': 2, 'critical': 3, 'normal': 1.
                       dramSingleBitErrorCount 1.3.6.1.4.1.4547.2.3.2.10 integer32 read-only
Number of Single-bit ECC errors since last reboot
                       chassisThroughputStatus 1.3.6.1.4.1.4547.2.3.2.11 integer read-only
Overall bridge throughput status (normal, warning). Normal indicates that there is no data bottleneck. Warning indicates that the aggregate fibre channel throughput has exceeded 50,000 IOPS. Enumeration: 'warning': 2, 'normal': 1.
                       fcSFPInfoTable 1.3.6.1.4.1.4547.2.3.2.12 no-access
Stores configuration information relating to installed FibreChannel SFPs.
                             fcSFPInfoEntry 1.3.6.1.4.1.4547.2.3.2.12.1 no-access
Stores information about installed fibre channel SFPs.
                                 fcSFPIndex 1.3.6.1.4.1.4547.2.3.2.12.1.1 integer32 no-access
Used to index the SFP in the SFP Info table.
                                 fcSFPVendor 1.3.6.1.4.1.4547.2.3.2.12.1.2 displaystring read-only
SFP vendor name
                                 fcSFPSerialNum 1.3.6.1.4.1.4547.2.3.2.12.1.3 displaystring read-only
SFP serial number
                                 fcSFPPartNum 1.3.6.1.4.1.4547.2.3.2.12.1.4 displaystring read-only
SFP vendor-supplied part number
                                 fcSFPDataRateCapability 1.3.6.1.4.1.4547.2.3.2.12.1.5 integer read-only
Maximum data rate capability of the fibre channel SFP. Enumeration: 'gb4': 4, 'gb2': 2, 'gb16': 16, 'gb8': 8.
                       sasQSFPInfoTable 1.3.6.1.4.1.4547.2.3.2.13 no-access
Stores configuration information relating to installed SAS QSFPs.
                             sasQSFPInfoEntry 1.3.6.1.4.1.4547.2.3.2.13.1 no-access
Stores information about installed SAS QSFPs.
                                 sasQSFPIndex 1.3.6.1.4.1.4547.2.3.2.13.1.1 integer32 no-access
Used to index the QSFP in the QSFP Info table.
                                 sasQSFPVendor 1.3.6.1.4.1.4547.2.3.2.13.1.2 displaystring read-only
QSFP vendor name
                                 sasQSFPSerialNum 1.3.6.1.4.1.4547.2.3.2.13.1.3 displaystring read-only
QSFP serial number
                                 sasQSFPType 1.3.6.1.4.1.4547.2.3.2.13.1.4 qsfptech read-only
QSFP type
                                 sasQSFPPartNum 1.3.6.1.4.1.4547.2.3.2.13.1.5 displaystring read-only
QSFP vendor-supplied part number
                   bridgePorts 1.3.6.1.4.1.4547.2.3.3
                       fcPortInfoTable 1.3.6.1.4.1.4547.2.3.3.1 no-access
Stores fibre channel specific information for each fibre channel port.
                           fcPortInfoEntry 1.3.6.1.4.1.4547.2.3.3.1.1 no-access
Stores state and capability information about the fibre channel ports.
                               fcPortIndex 1.3.6.1.4.1.4547.2.3.3.1.1.1 integer32 no-access
Used to index the fibre channel port in the FC Port Entry table.
                               fcPortPortNumber 1.3.6.1.4.1.4547.2.3.3.1.1.2 integer32 read-only
The fibre channel port number.
                               fcPortOperationalState 1.3.6.1.4.1.4547.2.3.3.1.1.3 integer read-only
Operational state of the fibre channel port. Enumeration: 'unknown': -1, 'offline': 2, 'online': 1.
                               fcPortAdminState 1.3.6.1.4.1.4547.2.3.3.1.1.4 integer read-only
Administrative state of the fibre channel port. Indicates whether the port is enabled or disabled. Enumeration: 'disabled': 1, 'unknown': -1, 'enabled': 2.
                               fcPortDataRateNegotiated 1.3.6.1.4.1.4547.2.3.3.1.1.5 integer read-only
Current negotiated data rate of fibre channel port. Enumeration: 'unknown': -1, 'gb4': 4, 'gb2': 2, 'gb8': 8.
                               fcPortConnModeNegotiated 1.3.6.1.4.1.4547.2.3.3.1.1.6 integer read-only
Current negotiated mode of the fibre channel port. Enumeration: 'unknown': -1, 'loop': 1, 'ptp': 2.
                               fcPortDataRateConfigured 1.3.6.1.4.1.4547.2.3.3.1.1.7 integer read-only
Configured data rate of fibre channel port. Enumeration: 'auto': -1, 'gb4': 4, 'gb2': 2, 'gb8': 8.
                               fcPortConnModeConfigured 1.3.6.1.4.1.4547.2.3.3.1.1.8 integer read-only
Configured mode of the fibre channel port. Enumeration: 'looppreferred': 3, 'ptppreferred': 4, 'loop': 1, 'ptp': 2.
                               fcPortDataRateCapability 1.3.6.1.4.1.4547.2.3.3.1.1.9 integer read-only
Maximum data rate capability of the fibre channel port. Enumeration: 'gb4': 4, 'gb2': 2, 'gb8': 8.
                               fcPortNodeName 1.3.6.1.4.1.4547.2.3.3.1.1.10 displaywwn read-only
Fibre channel node name.
                               fcPortPortName 1.3.6.1.4.1.4547.2.3.3.1.1.11 displaywwn read-only
Fibre channel port name.
                               fcPortPeerName 1.3.6.1.4.1.4547.2.3.3.1.1.12 displaywwn read-only
The port name of the fabric-attached fibre channel peer. Only valid for a switched fabric. Direct-connected fibre channel ports will respond with all zeros.
                       fcPortStatisticsTable 1.3.6.1.4.1.4547.2.3.3.2 no-access
Stores fibre channel specific I/O and error statistics for each fibre channel port.
                           fcPortStatisticsEntry 1.3.6.1.4.1.4547.2.3.3.2.1 no-access
Stores statistics about fibre channel ports.
                               fcStatsIndex 1.3.6.1.4.1.4547.2.3.3.2.1.1 integer32 no-access
Used to index the fibre channel port in the Fibre Channel Port Statistics table.
                               fcStatsTxWords 1.3.6.1.4.1.4547.2.3.3.2.1.2 unsigned32 read-write
Number of words transmitted on this fibre channel port.
                               fcStatsRxWords 1.3.6.1.4.1.4547.2.3.3.2.1.3 unsigned32 read-write
Number of words received on this fibre channel port.
                               fcStatsTimeSinceReset 1.3.6.1.4.1.4547.2.3.3.2.1.4 timeinterval read-only
Amount of time since the fibre channel port statistics were reset.
                               fcStatsErrLinkFailure 1.3.6.1.4.1.4547.2.3.3.2.1.5 unsigned32 read-write
Number of link failure events on this fibre channel port.
                               fcStatsErrLossOfSync 1.3.6.1.4.1.4547.2.3.3.2.1.6 unsigned32 read-write
Number of loss of sync events on this fibre channel port.
                               fcStatsErrInvalidCRC 1.3.6.1.4.1.4547.2.3.3.2.1.7 unsigned32 read-write
Number of frames with invalid CRCs on this fibre channel port.
                               fcStatsErrInvalidTxWords 1.3.6.1.4.1.4547.2.3.3.2.1.8 unsigned32 read-write
Number of invalid TX word events on this fibre channel port.
                               fcStatsErrLipCount 1.3.6.1.4.1.4547.2.3.3.2.1.9 unsigned32 read-write
Number of LIP events on this fibre channel port.
                               fcStatsErrNOSCount 1.3.6.1.4.1.4547.2.3.3.2.1.10 unsigned32 read-write
Number of NOS events on this fibre channel port.
                               fcStatsErrSignalLoss 1.3.6.1.4.1.4547.2.3.3.2.1.11 unsigned32 read-write
Number of loss of signal events on this fibre channel port.
                               fcStatsErrPrimitive 1.3.6.1.4.1.4547.2.3.3.2.1.12 unsigned32 read-write
Number of primitive sequential protocol errors on this fibre channel port.
                       sasPortInfoTable 1.3.6.1.4.1.4547.2.3.3.3 no-access
Stores SAS specific information for each SAS port.
                           sasPortInfoEntry 1.3.6.1.4.1.4547.2.3.3.3.1 no-access
Stores information about the SAS ports.
                               sasPortIndex 1.3.6.1.4.1.4547.2.3.3.3.1.1 integer32 no-access
Used to index the SAS port in the SAS Port Entry table.
                               sasPortPortNumber 1.3.6.1.4.1.4547.2.3.3.3.1.2 integer32 read-only
The SAS port number.
                               sasPortOperationalState 1.3.6.1.4.1.4547.2.3.3.3.1.3 integer read-only
Operational state of this entire SAS port. Degraded state is entered when fewer than all four PHYs are online. Offline state is entered when all four PHYs are offline. Enumeration: 'unknown': -1, 'offline': 2, 'degraded': 3, 'online': 1.
                               sasPortPhy1State 1.3.6.1.4.1.4547.2.3.3.3.1.4 phystatus read-only
Operational state of SAS PHY 1 of this SAS port.
                               sasPortPhy2State 1.3.6.1.4.1.4547.2.3.3.3.1.5 phystatus read-only
Operational state of SAS PHY 2 of this SAS port.
                               sasPortPhy3State 1.3.6.1.4.1.4547.2.3.3.3.1.6 phystatus read-only
Operational state of SAS PHY 3 of this SAS port.
                               sasPortPhy4State 1.3.6.1.4.1.4547.2.3.3.3.1.7 phystatus read-only
Operational state of SAS PHY 4 of this SAS port.
                               sasPortAdminState 1.3.6.1.4.1.4547.2.3.3.3.1.8 integer read-only
Administrative state of this SAS port. Indicates whether the port is enabled or disabled. Enumeration: 'disabled': 1, 'unknown': -1, 'enabled': 2.
                               sasPortDataRateCapability 1.3.6.1.4.1.4547.2.3.3.3.1.9 integer read-only
Maximum data rate capability of the SAS port. Enumeration: 'gb6': 6, 'gb3': 3, 'gb1point5': 1.
                               sasPortDataRateNegotiated 1.3.6.1.4.1.4547.2.3.3.3.1.10 integer read-only
Current negotiated data rate of this SAS port. Enumeration: 'gb6': 6, 'gb3': 3, 'gb1point5': 1.
                               sasPortAddress 1.3.6.1.4.1.4547.2.3.3.3.1.11 displaywwn read-only
SAS Port Address.
                       sasPhyStatisticsTable 1.3.6.1.4.1.4547.2.3.3.4 no-access
Stores SAS specific I/O and error statistics for each SAS PHY.
                           sasPhyStatisticsEntry 1.3.6.1.4.1.4547.2.3.3.4.1 no-access
Stores statistics about SAS Phys.
                               sasPhyStatsIndex 1.3.6.1.4.1.4547.2.3.3.4.1.1 integer32 no-access
Used to index the SAS PHY in the SAS PHY Statistics table.
                               sasPhyStatsTimeSinceReset 1.3.6.1.4.1.4547.2.3.3.4.1.2 timeinterval read-only
Amount of time since the SAS PHY statistics were reset on this SAS PHY.
                               sasPhyStatsErrLinkChanged 1.3.6.1.4.1.4547.2.3.3.4.1.3 unsigned32 read-write
Number of link changed events on this SAS PHY.
                               sasPhyStatsErrInvalidCRC 1.3.6.1.4.1.4547.2.3.3.4.1.4 unsigned32 read-write
Number of Invalid CRC events on this SAS PHY.
                               sasPhyStatsErrPhyReset 1.3.6.1.4.1.4547.2.3.3.4.1.5 unsigned32 read-write
Number of Phy Reset events on this SAS PHY.
                               sasPhyStatsErrLossOfSync 1.3.6.1.4.1.4547.2.3.3.4.1.6 unsigned32 read-write
Number of loss of sync events on this SAS PHY.
                               sasPhyStatsErrDisparityCount 1.3.6.1.4.1.4547.2.3.3.4.1.7 unsigned32 read-write
Number of disparity error events on this SAS PHY.
                               sasPhyStatsErrInvalidDwords 1.3.6.1.4.1.4547.2.3.3.4.1.8 unsigned32 read-write
Number of invalid DWORD events on this SAS PHY.
                   bridgeConfig 1.3.6.1.4.1.4547.2.3.4
                       trapsEnabled 1.3.6.1.4.1.4547.2.3.4.1 integer read-only
Indicates whether traps are enabled or disabled. Enumeration: 'disabled': 1, 'enabled': 2.
                       snmpUpdatesEnabled 1.3.6.1.4.1.4547.2.3.4.2 integer read-only
Indicates whether SNMP updates are enabled or disabled. Enumeration: 'disabled': 1, 'enabled': 2.
                   bridgeTrapInfo 1.3.6.1.4.1.4547.2.3.5
                       trapMaxClients 1.3.6.1.4.1.4547.2.3.5.1 integer32 read-only
The maximum number of SNMP trap recipients supported by this HW element.
                       trapClientTable 1.3.6.1.4.1.4547.2.3.5.2 no-access
Stores a row for each IP address/port number configured to receive traps.
                           trapClientEntry 1.3.6.1.4.1.4547.2.3.5.2.1 no-access
Ip/Port pair for a specific client.
                               trapClientIndex 1.3.6.1.4.1.4547.2.3.5.2.1.1 integer32 no-access
Used to index a trap client in the trapClientTable.
                               trapClientIpAddress 1.3.6.1.4.1.4547.2.3.5.2.1.2 displaystring read-only
The IP address of a client registered for traps in dotted notation.
                               trapClientPort 1.3.6.1.4.1.4547.2.3.5.2.1.3 integer32 read-only
The UDP port to send traps for this trap client. Normally this would be the standard trap port (162). This object is an index and must be specified to create a row in this table.
                               trapClientFilter 1.3.6.1.4.1.4547.2.3.5.2.1.4 integer read-only
This value defines the trap severity filter for this trap host. The unit will send traps to this trap client that have a severity level less than or equal to this value. The default value of this object is 'warning'. Enumeration: 'informational': 4, 'none': 1, 'critical': 2, 'warning': 3, 'all': 5.
                   bridgeMIBConformance 1.3.6.1.4.1.4547.2.3.6
                       bridgeMIBCompliances 1.3.6.1.4.1.4547.2.3.6.1
                           bridgeBasicCompliance 1.3.6.1.4.1.4547.2.3.6.1.1
The requirements for a bridge implementation.
                       bridgeMIBGroups 1.3.6.1.4.1.4547.2.3.6.2
                           bridgeIdentityBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.1
The bridge identity information group.
                           bridgeChassisBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.2
The bridge chassis information group.
                           bridgFcPortInfoBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.3
The bridge ports information group.
                           bridgeFcPortStatisicsBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.4
The bridge ports information group.
                           bridgeSasPortInfoBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.5
The bridge ports information group.
                           bridgeSasPortStatisicsBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.6
The bridge ports information group.
                           bridgeConfigBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.7
The bridge configuration information group.
                           bridgeTrapInfoBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.8
The bridge trap information group.
                           bridgeTrapsBasicGroup 1.3.6.1.4.1.4547.2.3.6.2.9
The bridge traps group.
           attoModules 1.3.6.1.4.1.4547.3
           attoAgentCapability 1.3.6.1.4.1.4547.4