ATS-MIB: View SNMP OID List / Download MIB

VENDOR: ABLEREX ELECTRONIC


 Home MIB: ATS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, UPS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ats 1.3.6.1.4.1.37662
             product 1.3.6.1.4.1.37662.1
                 webAppliance 1.3.6.1.4.1.37662.1.2
                     atsAgent 1.3.6.1.4.1.37662.1.2.2
                         single 1.3.6.1.4.1.37662.1.2.2.1
                             atsObjectGroup 1.3.6.1.4.1.37662.1.2.2.1.1
                                 atsIdentGroup 1.3.6.1.4.1.37662.1.2.2.1.1.1
                                     atsIdentGroupModel 1.3.6.1.4.1.37662.1.2.2.1.1.1.1 displaystring read-only
The device model name.
                                     atsIdentGroupSerialNumber 1.3.6.1.4.1.37662.1.2.2.1.1.1.2 displaystring read-only
The device serial number.
                                     atsIdentGroupManufacturer 1.3.6.1.4.1.37662.1.2.2.1.1.1.3 displaystring read-only
The device manufacturer name.
                                     atsIdentGroupFirmwareRevision 1.3.6.1.4.1.37662.1.2.2.1.1.1.4 displaystring read-only
The device firmware revision.
                                     atsIdentGroupAgentFirmwareRevision 1.3.6.1.4.1.37662.1.2.2.1.1.1.5 displaystring read-only
The agent firmware revision.
                                 atsInputGroup 1.3.6.1.4.1.37662.1.2.2.1.1.2
                                     atsInputGroupPreference 1.3.6.1.4.1.37662.1.2.2.1.1.2.1 displaystring read-only
This shows the Output Source Priority by Source A or Source B.
                                     atsInputGroupSourceAstatus 1.3.6.1.4.1.37662.1.2.2.1.1.2.2 integer read-only
This field shows the status of the source A. Status included? 'OK','Fail'. 'OK' mean frequency and voltage of Source A are normal. Enumeration: 'fail': 1, 'ok': 2.
                                     atsInputGroupSourceAinputVoltage 1.3.6.1.4.1.37662.1.2.2.1.1.2.3 integer read-only
The source A input voltage of the ATS input in volts.
                                     atsInputGroupSourceAinputFrequency 1.3.6.1.4.1.37662.1.2.2.1.1.2.4 integer read-only
The source A input frequency of the ATS input in 0.1 Hz.
                                     atsInputGroupSourceBstatus 1.3.6.1.4.1.37662.1.2.2.1.1.2.5 integer read-only
This field shows the status of the source B. Status included? 'OK','Fail'. 'OK' mean frequency and voltage of Source B are normal. Enumeration: 'fail': 1, 'ok': 2.
                                     atsInputGroupSourceBinputVoltage 1.3.6.1.4.1.37662.1.2.2.1.1.2.6 integer read-only
The source B input voltage of the ATS input in volts.
                                     atsInputGroupSourceBinputFrequency 1.3.6.1.4.1.37662.1.2.2.1.1.2.7 integer read-only
The source B input frequency of the ATS input in 0.1 Hz.
                                     atsInputGroupSourceAvoltageUpperLimit 1.3.6.1.4.1.37662.1.2.2.1.1.2.8 integer read-only
The source A voltage upper limit of the ATS input in volts.
                                     atsInputGroupSourceAvoltageLowerLimit 1.3.6.1.4.1.37662.1.2.2.1.1.2.9 integer read-only
The source A voltage lower limit of the ATS input in volts.
                                     atsInputGroupSourceAfrequencyUpperLimit 1.3.6.1.4.1.37662.1.2.2.1.1.2.10 integer read-only
The source A frequency upper limit of the ATS input in 0.1 Hz.
                                     atsInputGroupSourceAfrequencyLowerLimit 1.3.6.1.4.1.37662.1.2.2.1.1.2.11 integer read-only
The source A frequency lower limit of the ATS input in 0.1 Hz.
                                     atsInputGroupSourceBvoltageUpperLimit 1.3.6.1.4.1.37662.1.2.2.1.1.2.12 integer read-only
The source B voltage upper limit of the ATS input in volts.
                                     atsInputGroupSourceBvoltageLowerLimit 1.3.6.1.4.1.37662.1.2.2.1.1.2.13 integer read-only
The source B voltage lower limit of the ATS input in volts.
                                     atsInputGroupSourceBfrequencyUpperLimit 1.3.6.1.4.1.37662.1.2.2.1.1.2.14 integer read-only
The source B frequency upper limit of the ATS input in 0.1 Hz.
                                     atsInputGroupSourceBfrequencyLowerLimit 1.3.6.1.4.1.37662.1.2.2.1.1.2.15 integer read-only
The source B frequency lower limit of the ATS input in 0.1 Hz.
                                 atsOutputGroup 1.3.6.1.4.1.37662.1.2.2.1.1.3
                                     atsOutputGroupOutputSource 1.3.6.1.4.1.37662.1.2.2.1.1.3.1 displaystring read-only
Output source is supply by Source A or Source B. Status included? 'Source A','Source B'.
                                     atsOutputGroupOutputVoltage 1.3.6.1.4.1.37662.1.2.2.1.1.3.2 nonnegativeinteger read-only
The Output Voltage in volts.
                                     atsOutputGroupOutputFequency 1.3.6.1.4.1.37662.1.2.2.1.1.3.3 nonnegativeinteger read-only
The output fequency in 0.1 Hz.
                                     atsOutputGroupOutputCurrent 1.3.6.1.4.1.37662.1.2.2.1.1.3.4 nonnegativeinteger read-only
The output current in 0.1 A.
                                     atsOutputGroupLoad 1.3.6.1.4.1.37662.1.2.2.1.1.3.5 nonnegativeinteger read-only
The load in %.
                                 atsHmiSwitchGroup 1.3.6.1.4.1.37662.1.2.2.1.1.4
                                     atsHmiSwitchGroupBuzzer 1.3.6.1.4.1.37662.1.2.2.1.1.4.1 integer read-only
This field shows the status of the buzzer. Status included? 'Enable','Disable'. Enumeration: 'buzzerDisabled': 1, 'buzzerEnabled': 2.
                                     atsHmiSwitchGroupAtsAlarm 1.3.6.1.4.1.37662.1.2.2.1.1.4.2 integer read-only
This shows the alarm occured. Enumeration: 'nothing': 1, 'atsOccurAlarm': 2.
                                     atsHmiSwitchGroupAutoReturn 1.3.6.1.4.1.37662.1.2.2.1.1.4.3 integer read-only
Auto recover to that setting value when two input source normal. Enumeration: 'on': 2, 'off': 1.
                                     atsHmiSwitchGroupSourceTransferByLoad 1.3.6.1.4.1.37662.1.2.2.1.1.4.4 integer read-only
On: If overload timeout occurred , ATS will tranfer to another source automaticlly. Off:If overload timeout occurred , ATS will turn off the output source. Enumeration: 'on': 2, 'off': 1.
                                     atsHmiSwitchGroupSourceTransferByPhase 1.3.6.1.4.1.37662.1.2.2.1.1.4.5 integer read-only
On: when the transfer of output source occur, the transfer can active if differernce of phase less than setting value Off: Switch transfer immed... whatever difference of phase. Enumeration: 'on': 2, 'off': 1.
                                 atsMiscellaneousGroup 1.3.6.1.4.1.37662.1.2.2.1.1.5
                                     atsMiscellaneousGroupAtsSystemTemperture 1.3.6.1.4.1.37662.1.2.2.1.1.5.1 integer read-only
The ATS system temperture in degree C.
                                     atsMiscellaneousGroupSystemMaxCurrent 1.3.6.1.4.1.37662.1.2.2.1.1.5.2 integer read-only
The system max current int 0.1 Amp.
                                 atsControlGroup 1.3.6.1.4.1.37662.1.2.2.1.1.6
                                     atsControlGroupBuzzerAlarmControl 1.3.6.1.4.1.37662.1.2.2.1.1.6.1 integer read-write
The buzzer alarm control. Enumeration: 'buzzerOn': 2, 'buzzerOff': 1.
                                     atsControlGroupManualTransfer 1.3.6.1.4.1.37662.1.2.2.1.1.6.2 integer read-write
User can click this bottom to decide output source supply is Source A or Source B.
                                 agentConfig 1.3.6.1.4.1.37662.1.2.2.1.1.7
                                     agentConfigIpaddress 1.3.6.1.4.1.37662.1.2.2.1.1.7.1 ipaddress read-write
The ip address that NMS can identify the managed device
                                     agentConfigGateway 1.3.6.1.4.1.37662.1.2.2.1.1.7.2 ipaddress read-write
The default gateway that allow device managed through routers
                                     agentConfigSubnetMask 1.3.6.1.4.1.37662.1.2.2.1.1.7.3 ipaddress read-write
Internet address subnet mask
                                     agentConfigDate 1.3.6.1.4.1.37662.1.2.2.1.1.7.4 displaystring read-write
The date in agent, format is (dd/mm/yyyy)
                                     agentConfigTime 1.3.6.1.4.1.37662.1.2.2.1.1.7.5 displaystring read-write
The time in agent, format is (hh:mm:ss)
                                     agentConfigHistoryLogFrequency 1.3.6.1.4.1.37662.1.2.2.1.1.7.6 integer read-write
The frequency of the updation of the history log. The value is in seconds
                                     agentConfigExtHistoryLogFrequency 1.3.6.1.4.1.37662.1.2.2.1.1.7.7 integer read-write
The ups parameters are sampled at the rate governed by the mconfigHistroyLogFrequency. These sampled values are further conslidated over period of time which is determined by this object.
                                     agentConfigPollRate 1.3.6.1.4.1.37662.1.2.2.1.1.7.8 integer read-write
The frequency that proxy agent polls the connected UPS in JBUS protocol. (unit : second)
                                     agentConfigBaudRate 1.3.6.1.4.1.37662.1.2.2.1.1.7.9 integer read-only
The serial port communication speed. only 9600 allowed
                                     agentConfigDhcpStatue 1.3.6.1.4.1.37662.1.2.2.1.1.7.10 integer read-write
Enable or disable DHCP/BootP capability Enumeration: 'disabled': 2, 'enabled': 1.
                                     agentConfigTelnetStatue 1.3.6.1.4.1.37662.1.2.2.1.1.7.11 integer read-write
Enable or disable telnet access Enumeration: 'disabled': 2, 'enabled': 1.
                                     agentConfigTftpStatue 1.3.6.1.4.1.37662.1.2.2.1.1.7.12 integer read-write
Enable or disable network upgrade capability Enumeration: 'disabled': 2, 'enabled': 1.
                                     agentConfigResetToDefault 1.3.6.1.4.1.37662.1.2.2.1.1.7.13 integer read-write
Reset all parameters of ATS to default value Enumeration: 'reset': 1, 'nothing': 2.
                                     agentConfigRestart 1.3.6.1.4.1.37662.1.2.2.1.1.7.14 integer read-write
Restart ATS Enumeration: 'nothing': 2, 'restart': 1.
                                     agentConfigClearAgentLog 1.3.6.1.4.1.37662.1.2.2.1.1.7.15 integer read-write
Clear agent log data Enumeration: 'nothing': 2, 'clear': 1.
                                     agentConfigClearEventLog 1.3.6.1.4.1.37662.1.2.2.1.1.7.16 integer read-write
Clear event log data Enumeration: 'nothing': 2, 'clear': 1.
                                     agentConfigClearExtHistoryLog 1.3.6.1.4.1.37662.1.2.2.1.1.7.17 integer read-write
Clear extented history log data Enumeration: 'nothing': 2, 'clear': 1.
                                     agentConfigClearHistoryLog 1.3.6.1.4.1.37662.1.2.2.1.1.7.18 integer read-write
Clear history log data Enumeration: 'nothing': 2, 'clear': 1.
                                     agentConfigTrapRetryCount 1.3.6.1.4.1.37662.1.2.2.1.1.7.19 integer read-write
The count of repeat traps to send to NMS before trap acknowledge received.
                                     agentConfigTrapRetryTime 1.3.6.1.4.1.37662.1.2.2.1.1.7.20 integer read-write
The time between retry traps sned to NMS.
                                     agentConfigTrapAckSignature 1.3.6.1.4.1.37662.1.2.2.1.1.7.21 integer read-write
The signature of trap acknowledge.
                                     agentConfigMibVersion 1.3.6.1.4.1.37662.1.2.2.1.1.7.22 integer read-only
The version of MIB spec.
                                     agentConfigTrapsReceiversTable 1.3.6.1.4.1.37662.1.2.2.1.1.7.23 no-access
A list of managers to send traps to. The number of entries is given by the value of agentConfigNumTrapReceivers
                                           agentConfigTrapsReceiversEntry 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1 no-access
The managers to send traps to.
                                               trapsIndex 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.1 integer read-only
The index to a trap receiver entry.
                                               trapsReceiverAddr 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.2 displaystring read-write
The IP address of the manager to send a trap to.
                                               receiverCommunityString 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.3 displaystring read-write
The community name to use in the trap when sent to the manager.
                                               receiverNmsType 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.4 integer read-write
The trap group that NMS desired. Enumeration: 'none': 1, 'ats-trap': 2.
                                               receiverSeverityLevel 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.5 integer read-write
The severity level of traps to be received by this manager. Enumeration: 'severe': 3, 'warning': 2, 'informational': 1.
                                               receiverDescription 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.6 displaystring read-write
Description of trap receivers
                                     agentConfigAccessControlTable 1.3.6.1.4.1.37662.1.2.2.1.1.7.24 no-access
A list of managers which can access ATS with private community string.
                                           agentConfigAccessControlEntry 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1 no-access
The managers.
                                               accessIndex 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.1 integer read-only
The index to a access control entry.
                                               accessControlAddr 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.2 ipaddress read-write
The IP address of the manager to access ATS
                                               accessCommunityString 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.3 displaystring read-write
The community name to use in the manager when access ATS
                                               accessControlMode 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.4 integer read-write
Access type, only read/Write access type can change parameter of ATS Enumeration: 'readWrite': 2, 'readOnly': 1, 'notAccess': 3.
                                     agentConfigDefaultLanguage 1.3.6.1.4.1.37662.1.2.2.1.1.7.25 integer read-write
The default languauge for browser, when set to auto(1) ATS will send page in the language depends on the request language of browser. Enumeration: 'auto': 1, 'simplifiedChinese': 4, 'traditionalChinese': 3, 'english': 2.
                                     agentConfigIPv6AddrStatus 1.3.6.1.4.1.37662.1.2.2.1.1.7.26 integer read-only
The status of IPv6 global address. When the auto-configuration of IPv6 address is disabled, it shows manual configuration(3). Otherwise, it shows valid(2) for auto-configured successfully, or shows invalid(1) for the failure in auto-configured. Enumeration: 'valid': 2, 'invalid': 1, 'manualConfiguration': 3.
                                     agentConfigIPv6AddrAutoConfig 1.3.6.1.4.1.37662.1.2.2.1.1.7.27 integer read-write
The state of IPv6 address auto-configuration. If set to enable(1), ATS will try to get a valid global/site-local address from IPv6 router or DHCPv6 server on the same link. Enumeration: 'enable': 1, 'disable': 2.
                                     agentConfigIPv6LinkLocalAddr 1.3.6.1.4.1.37662.1.2.2.1.1.7.28 displaystring read-only
The IPv6 link-local address of ATS. It is auto-configured based on MAC address of ATS.
                                     agentConfigIPv6GlobalAddr 1.3.6.1.4.1.37662.1.2.2.1.1.7.29 displaystring read-write
The IPv6 global/site-local address of ATS. If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively.
                                     agentConfigIPv6PrefixlLength 1.3.6.1.4.1.37662.1.2.2.1.1.7.30 integer read-write
The prefix length of IPv6 global/site-local address.If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively.
                                     agentConfigIPv6DefaultRouter 1.3.6.1.4.1.37662.1.2.2.1.1.7.31 displaystring read-write
The address of IPv6 default router. If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively.
                                 emdStatus 1.3.6.1.4.1.37662.1.2.2.1.1.8
                                     emdSatatusEmdType 1.3.6.1.4.1.37662.1.2.2.1.1.8.1 integer read-only
The type of EMD plugged into the port. Enumeration: 'disabled': 2, 'unknown': 1, 'emdHT': 3, 'emdT': 4.
                                     emdSatatusTemperature 1.3.6.1.4.1.37662.1.2.2.1.1.8.2 integer read-only
The measurement of EMD temperature, in 0.1 degree
                                     emdSatatusHumidity 1.3.6.1.4.1.37662.1.2.2.1.1.8.3 integer read-only
The measurement of EMD humidity, in 0.1 degree
                                     emdSatatusAlarm1 1.3.6.1.4.1.37662.1.2.2.1.1.8.4 integer read-only
The EMD alarm-1 status Enumeration: 'disabled': 2, 'active': 3, 'inactive': 4, 'unknow': 1.
                                     emdSatatusAlarm2 1.3.6.1.4.1.37662.1.2.2.1.1.8.5 integer read-only
The EMD alarm-2 status Enumeration: 'disabled': 2, 'active': 3, 'inactive': 4, 'unknow': 1.
                                 emdConfig 1.3.6.1.4.1.37662.1.2.2.1.1.9
                                     usahEmdConfigEmdConfig 1.3.6.1.4.1.37662.1.2.2.1.1.9.1 integer read-write
Enable or disable to detect presence of EMD Enumeration: 'disabled': 1, 'auto': 2.
                                     emdConfigEmdName 1.3.6.1.4.1.37662.1.2.2.1.1.9.2 displaystring read-write
Description of EMD
                                     emdConfigTemperature 1.3.6.1.4.1.37662.1.2.2.1.1.9.3
                                         emdConfigTempName 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.1 displaystring read-write
Description of EMD temperature sensor
                                         emdConfigTempHighSetPoint 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.2 integer read-write
The set point for high temperature warning, in degrees
                                         emdConfigTempHighStatus 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.3 integer read-write
To enable/disable high set point check with emd temperature. Enumeration: 'disabled': 2, 'enabled': 1.
                                         emdConfigTempLowSetPoint 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.4 integer read-write
The set point for low temperature warning, in degrees
                                         emdConfigTempLowStatus 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.5 integer read-write
To enable/disable low set point check with emd temperature. Enumeration: 'disabled': 2, 'enabled': 1.
                                         emdConfigTempOffset 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.6 integer read-write
The offset to calibrate temperature of EMD, in degrees
                                     emdConfigHumidity 1.3.6.1.4.1.37662.1.2.2.1.1.9.4
                                         emdConfigHumidityName 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.1 displaystring read-write
Description of EMD humidity sensor
                                         emdConfigHumidityHighSetPoint 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.2 integer read-write
The set point for high humidity warning, in %
                                         emdConfigHumidityHighStatus 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.3 integer read-write
To enable/disable high set point check with emd humidity. Enumeration: 'disabled': 2, 'enabled': 1.
                                         emdConfigHumidityLowSetPoint 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.4 integer read-write
The set point for low humidity warning, in %
                                         emdConfigHumidityLowStatus 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.5 integer read-write
To enable/disable low set point check with emd humidity. Enumeration: 'disabled': 2, 'enabled': 1.
                                         emdConfigHumidityOffset 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.6 integer read-write
The offset to calibrate humidity of EMD, in %
                                     emdConfigAlarm1 1.3.6.1.4.1.37662.1.2.2.1.1.9.5
                                         emdConfigAlarm1Name 1.3.6.1.4.1.37662.1.2.2.1.1.9.5.1 displaystring read-write
Description of EMD alarm-1
                                         emdConfigAlarm1Type 1.3.6.1.4.1.37662.1.2.2.1.1.9.5.2 integer read-write
The alarm-1 operation type Enumeration: 'disabled': 1, 'normalClose': 3, 'nomralOpen': 2.
                                     emdConfigAlarm2 1.3.6.1.4.1.37662.1.2.2.1.1.9.6
                                         emdConfigAlarm2Name 1.3.6.1.4.1.37662.1.2.2.1.1.9.6.1 displaystring read-write
Description of EMD alarm-2
                                         emdConfigAlarm2Type 1.3.6.1.4.1.37662.1.2.2.1.1.9.6.2 integer read-write
The alarm-1 operation type Enumeration: 'disabled': 1, 'normalClose': 3, 'nomralOpen': 2.
                             atsTrapGroup 1.3.6.1.4.1.37662.1.2.2.1.2
                                   atsAtsAlarm 1.3.6.1.4.1.37662.1.2.2.1.20.1
WARNING: ATS Alarm.
                                   atsSourceAvoltageAbnormal 1.3.6.1.4.1.37662.1.2.2.1.20.2
WARNING: Source A voltage abnormal.
                                   atsSourceBvoltageAbnormal 1.3.6.1.4.1.37662.1.2.2.1.20.3
WARNING: Source B voltage abnormal.
                                   atsSourceAfrequencyAbnormal 1.3.6.1.4.1.37662.1.2.2.1.20.4
WARNING: Source A frequency abnormal.
                                   atsSourceBfrequencyAbnormal 1.3.6.1.4.1.37662.1.2.2.1.20.5
WARNING: Source B frequency abnormal.
                                   atsOutputOverLoad 1.3.6.1.4.1.37662.1.2.2.1.20.6
SEVERE: Output over load.
                                   atsWorkPowerAabnormal 1.3.6.1.4.1.37662.1.2.2.1.20.7
SEVERE: Unit fault (Working power A abnormal).
                                   atsWorkPowerBabnormal 1.3.6.1.4.1.37662.1.2.2.1.20.8
SEVERE: Unit fault (Working power B abnormal).
                                   atsOverTemperature 1.3.6.1.4.1.37662.1.2.2.1.20.9
WARNING: Cabinet over temperature.
                                   atsDcOffsetAbnormal 1.3.6.1.4.1.37662.1.2.2.1.20.10
SEVERE: Unit fault (Sensor circuit abnormal).
                                   atsEepromAbnormal 1.3.6.1.4.1.37662.1.2.2.1.20.11
SEVERE: Unit fault (EEPROM data abnormal)
                                   atsLcdNotConnect 1.3.6.1.4.1.37662.1.2.2.1.20.12
SEVERE: LCD panel connection abnormal.
                                   atsOutputExceedsOverloadTime 1.3.6.1.4.1.37662.1.2.2.1.20.13
SEVERE: Overload time out, Output off, Reset needed.
                                   atsInputPhaseDifference 1.3.6.1.4.1.37662.1.2.2.1.20.14
SEVERE: Phase difference between resources exceed user defined value, Output off, Reset needed.
                                   atsUserSetOverLoad 1.3.6.1.4.1.37662.1.2.2.1.20.15
WARNING: User defined load pre-alarm.
                                   atsAtsAlarmToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.16
INFORMATION: ATS Alarm Normal.
                                   atsSourceAvoltageAbnormalToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.17
INFORMATION: Source A Voltage Normal.
                                   atsSourceBvoltageAbnormalToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.18
INFORMATION: Source B Voltage Normal.
                                   atsSourceAfrequencyAbnormalToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.19
INFORMATION: Source A Frequency Normal.
                                   atsSourceBfrequencyAbnormalToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.20
INFORMATION: Source B Frequency Normal.
                                   atsOutputOverLoadToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.21
INFORMATION: Output Load Normal.
                                   atsWorkPowerAabnormalToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.22
INFORMATION: Unit Normal (Working power A normal).
                                   atsWorkPowerBabnormalToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.23
INFORMATION: Unit Normal (Working power B normal).
                                   atsOverTemperatureToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.24
INFORMATION: Cabinet temperature Normal.
                                   atsDcOffsetAbnormalToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.25
INFORMATION: Unit Normal (Sensor circuit normal).
                                   atsEepromAbnormalToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.26
INFORMATION: Unit normal (EEPROM data normal)
                                   atsLcdNotConnectToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.27
INFORMATION: LCD panel connection normal.
                                   atsOutputExceedsOverloadTimeToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.28
INFORMATION: Output Load Normal.
                                   atsInputPhaseDifferenceToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.29
INFORMATION: Input sources return to normal phase.
                                   atsUserSetOverLoadToNormal 1.3.6.1.4.1.37662.1.2.2.1.20.30
INFORMATION: User defined load return to Normal.
                                   atsCommunicationLost 1.3.6.1.4.1.37662.1.2.2.1.20.31
SEVERE: Communication to the ATS has been lost. Steps to reestablish communication are in progress.
                                   atsCommunicationEstablished 1.3.6.1.4.1.37662.1.2.2.1.20.32
INFORMATION: Communication with the ATS has been established.
                                   emdTemperatureNotHigh 1.3.6.1.4.1.37662.1.2.2.1.20.33
INFORMATION: The temperature of EMD back to normal from high warning.
                                   emdTemperatureTooHigh 1.3.6.1.4.1.37662.1.2.2.1.20.34
WARNING: The temperature of EMD higher than set point.
                                   emdTemperatureNotLow 1.3.6.1.4.1.37662.1.2.2.1.20.35
INFORMATION: The temperature of EMD back to normal from low warning.
                                   emdTemperatureTooLow 1.3.6.1.4.1.37662.1.2.2.1.20.36
WARNING: The temperature of EMD lower than set point.
                                   emdHumidityNotHigh 1.3.6.1.4.1.37662.1.2.2.1.20.37
INFORMATION: The humidity of EMD back to normal from high warning.
                                   emdHumidityTooHigh 1.3.6.1.4.1.37662.1.2.2.1.20.38
WARNING: The humidity of EMD higher than set point.
                                   emdHumidityNotLow 1.3.6.1.4.1.37662.1.2.2.1.20.39
INFORMATION: The humidity of EMD back to normal from low warning.
                                   emdHumidityTooLow 1.3.6.1.4.1.37662.1.2.2.1.20.40
WARNING: The humidity of EMD lower than set point.
                                   emdAlarm1Normal 1.3.6.1.4.1.37662.1.2.2.1.20.41
INFORMATION: The status of emd alarm-1 back to normal from active.
                                   emdAlarm1Active 1.3.6.1.4.1.37662.1.2.2.1.20.42
WARNING: The status of emd alarm-1 activated.
                                   emdAlarm2Normal 1.3.6.1.4.1.37662.1.2.2.1.20.43
INFORMATION: The status of emd alarm-2 back to normal from active.
                                   emdAlarm2Active 1.3.6.1.4.1.37662.1.2.2.1.20.44
WARNING: The status of emd alarm-2 activated.