ATMF-CES-MIB: View SNMP OID List / Download MIB

VENDOR: ATM FORUM

Home	MIB: ATMF-CES-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
atmfCESmib	1.3.6.1.4.1.353.5.2			Circuit Emulation Specification
atmfDS1E1CESmib	1.3.6.1.4.1.353.5.2.1
atmfDS1E1CESConfTable	1.3.6.1.4.1.353.5.2.1.1		no-access	The CES configuration table. This includes mapping channels from ATM Port to CBR interfaces. There is one atmfDS1E1CESConfEntry per CES Entity
atmfDS1E1CESConfEntry	1.3.6.1.4.1.353.5.2.1.1.1		no-access	An entry in the CES table. For each entry there is a corresponding entry in the stack table
atmfDS1E1CESMapATMIndex	1.3.6.1.4.1.353.5.2.1.1.1.1	integer32	read-only	The value of this object is equal to MIB II's ifIndex value of the ATM Port interface mapped through this CES to a CBR interface.
atmfDS1E1CESMapVPI	1.3.6.1.4.1.353.5.2.1.1.1.2	integer32	read-only	The value of this object is equal to the VPI used for the emulated circuit represented by this entry in the ifTable. If there is no connection, this object is meaningless and will have the value zero.
atmfDS1E1CESMapVCI	1.3.6.1.4.1.353.5.2.1.1.1.3	integer32	read-only	The value of this object is equal to the VCI used for the emulated circuit represented by this entry in the ifTable. If there is no connection, this object is meaningless and will have the value zero
atmfDS1E1CESCBRService	1.3.6.1.4.1.353.5.2.1.1.1.4	integer	read-write	Define if DS1/E1 service as structured or not. A structured(2) interface is some nx64Kbps. An unstructured (1) interface is 1.544Mbps or 2.048Mbps. unstructured(1) passes all bits through the ATM network. strucutured(2) passes data bits through the ATM network, and may also pass signalling bits Enumeration: 'unstructured': 1, 'structured': 2.
atmfDS1E1CESCBRClockMode	1.3.6.1.4.1.353.5.2.1.1.1.5	integer	read-write	Define if DS1/E1 service clocking mode. This maps into transmit clock source of CBR interface. Enumeration: 'srts': 2, 'adaptive': 3, 'synchronous': 1.
atmfDS1E1CESCas	1.3.6.1.4.1.353.5.2.1.1.1.6	integer	read-write	This parameter selects which AAL1 Format should be used: Basic does not carry CAS bits, and uses a single 125 usec frame. E1Cas, Ds1SfCas and DS1EsfCas carry CAS bits in a multiframe structure for E1, DS1 SF and DS1 ESF respectively. This applies to structured interfaces only. Default is Basic (1). Enumeration: 'e1Cas': 2, 'ds1EsfCas': 4, 'ds1SfCas': 3, 'basic': 1.
atmfDS1E1CESPartialFill	1.3.6.1.4.1.353.5.2.1.1.1.7	integer32	read-write	If partial cell fill is used, the number of user octets per cell must be set with this parameter. Setting this parameter to zero disables partial cell fill, and causes all cells to be completely filled before they are sent.
atmfDS1E1CESBufMaxSize	1.3.6.1.4.1.353.5.2.1.1.1.8	integer32	read-write	Define maximum size in octets of the reassembly buffer. Some implementations may want allow the maximum buffer size to programmed to a size less than the physical limit to reduce the maximum delay through a circuit.
atmfDS1E1CESCDVRxT	1.3.6.1.4.1.353.5.2.1.1.1.9	integer32	read-write	UNITS `10usec'. The maximum cell arrival jitter in 10usec increments that the reassembly process will tolerate in the cell stream without producing errors in the CBR service interface
atmfDS1E1CESCellLossIntegrationPeriod	1.3.6.1.4.1.353.5.2.1.1.1.10	integer32	read-write	The time in milliseconds for the cell loss integration period. If a cells are lost for this period of time. atmfDS1E1CESCellLossStatus is set to loss (2).The mandatory definition is 2500 UNITS `msec'
atmfDS1E1CESStatsTable	1.3.6.1.4.1.353.5.2.1.2		no-access	The CES AAL1 statistical data table.
atmfDS1E1CESStatsEntry	1.3.6.1.4.1.353.5.2.1.2.1		no-access	An entry in the CES AAL1 Stats table.
atmfDS1E1CESReassCells	1.3.6.1.4.1.353.5.2.1.2.1.1	counter32	read-only	This count gives the number of cells played out to the DS1/E1 Service Interface. It excludes cells that were discarded for any reason, including cells that were not used due to being declared misinserted, or discarded while the reassembler was waiting to achieve synchronization.
atmfDS1E1CESHdrErrors	1.3.6.1.4.1.353.5.2.1.2.1.2	counter32	read-only	The count of the number of AAL1 header errors detected and possibly corrected. Header errors include correctable and uncorrectable CRC, plus bad parity.
atmfDS1E1CESPointerReframes	1.3.6.1.4.1.353.5.2.1.2.1.3	counter32	read-only	This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be reacquired.
atmfDS1E1CESLostCells	1.3.6.1.4.1.353.5.2.1.2.1.4	counter32	read-only	Number of lost cells.
atmfDS1E1CESBufUnderflows	1.3.6.1.4.1.353.5.2.1.2.1.5	counter32	read-only	Number of buffer underflows.
atmfDS1E1CESBufOverflows	1.3.6.1.4.1.353.5.2.1.2.1.6	counter32	read-only	Number of buffer overflows.
atmfDS1E1CESCellLossStatus	1.3.6.1.4.1.353.5.2.1.2.1.7	integer	read-only	When cells are lost for the number of milliseconds specified by atmfDS1E1CESCellLossIntegrationPeriod, the value is set to loss (2). When cells are no longer lost, the value is set to noLoss (1). An additional variable idle os added to indicate cbrct connections status of Idle. Enumeration: 'loss': 2, 'idle': 3, 'noLoss': 1.