ATM-DXI-MIB: View SNMP OID List / Download MIB

VENDOR: ATM FORUM


 Home MIB: ATM-DXI-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 atmForum 1.3.6.1.4.1.353
         atmUniDxi 1.3.6.1.4.1.353.3
             atmDxi 1.3.6.1.4.1.353.3.2
                 atmDxiConfTable 1.3.6.1.4.1.353.3.2.2 no-access
This table contains ATM DXI configuration information including information on the mode supported across the DXI.
                     atmDxiConfEntry 1.3.6.1.4.1.353.3.2.2.1 no-access
This list contains ATM DXI configuration information.
                         atmDxiConfIfIndex 1.3.6.1.4.1.353.3.2.2.1.2 integer read-only
The value of this object identifies, for SNMP, the ATM DXI interface for which this entry contains management information. This is the same value as used to identify the IfEntry describing the DCE interface. Management uses and expects this value. In the proxy mode of operation, the DCE always treats this as 0, but preserves it in its response to the DTE. 0, the DXI value, means the interface over which the DXI LMI request was received.
                         atmDxiConfMode 1.3.6.1.4.1.353.3.2.2.1.3 integer read-write
This object identifies the dxi mode being used at the atm dxi port. Enumeration: 'mode1a': 1, 'mode1b': 2, 'mode2': 3.
                 atmDxiDFAConfTable 1.3.6.1.4.1.353.3.2.3 no-access
This table contains configuration information about a particular DFA.
                     atmDxiDFAConfEntry 1.3.6.1.4.1.353.3.2.3.1 no-access
This list contains ATM DXI DFA configuration information.
                         atmDxiDFAConfIfIndex 1.3.6.1.4.1.353.3.2.3.1.1 integer read-only
The value of this object identifies, for SNMP, the ATM DXI interface for which this entry contains management information. This is the same value as used to identify the IfEntry describing the DCE interface. Management uses and expects this value. In the proxy mode of operation, the DCE always treats this as 0, but preserves it in its response to the DTE. 0, the DXI value, means the interface over which the DXI LMI request was received.
                         atmDxiDFAConfDfaIndex 1.3.6.1.4.1.353.3.2.3.1.2 dfa read-only
This object identifies the DFA instance on the DXI identified by atmDxiDFAConfIfIndex.
                         atmDxiDFAConfAALType 1.3.6.1.4.1.353.3.2.3.1.3 integer read-write
This object identifies the AAL type supported at this DFA. Note, if mode 2 is supported on the DXI identified by the corresponding instance of atmDxiDFAConfIfIndex and that instance of atmDxiDFAConfIfIndex identifies the DCE side of the DXI, then this object contains the AAL Type being run on the corresponding VPI/VCI on the corresponding ATM UNI interface. Enumeration: 'unknown': 1, 'none': 2, 'aal34': 3, 'aal5': 4.
                 atmDxiEnterprise 1.3.6.1.4.1.353.3.2.4 object identifier no-access
This object is included as the first ID-Value pair in a Trap PDU for which the Generic Trap Type field has the value 'enterpriseSpecific'. The value of the object identifies the enterprise under whose authority the value of the Enterprise Trap Type field is defined.