ATKK-WLAN-ACCESS: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS

Home	MIB: ATKK-WLAN-ACCESS
Download as:		AT-SMI-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
tq2403	1.3.6.1.4.1.207.1.13.13
tq2450	1.3.6.1.4.1.207.1.13.19
tq2403ex	1.3.6.1.4.1.207.1.13.20
tq3600	1.3.6.1.4.1.207.1.13.22
tq3200	1.3.6.1.4.1.207.1.13.24
tq3400	1.3.6.1.4.1.207.1.13.25
tq4400	1.3.6.1.4.1.207.1.13.26
tq4600	1.3.6.1.4.1.207.1.13.27
tq4400e	1.3.6.1.4.1.207.1.13.34
atkkWlanAccess	1.3.6.1.4.1.207.8.42.6			Private MIB for the AT-TQ series wireless access point.
atkkWiAcVersion	1.3.6.1.4.1.207.8.42.6.1	integer32	read-only	The version number of this MIB module
atkkWiAcClients	1.3.6.1.4.1.207.8.42.6.2			Connected Stations List. This list consists of entries which describe STAs which are currently connected (associated) to the AP.
atkkWiAcClientTable	1.3.6.1.4.1.207.8.42.6.2.1		no-access	A table that contains information about STAs which are currently connected to the AP.
atkkWiAcClientEntry	1.3.6.1.4.1.207.8.42.6.2.1.1		no-access	Information about a STA.
atkkWiAcClientAddress	1.3.6.1.4.1.207.8.42.6.2.1.1.1	macaddress	read-only	MAC address identifying a peer STA.
atkkWiAcClientSSID	1.3.6.1.4.1.207.8.42.6.2.1.1.2	ssidstring	read-only	SSID to which the STA is associated.
atkkWiAcClient80211Spec	1.3.6.1.4.1.207.8.42.6.2.1.1.3	integer	read-only	802.11 technology which the STA is using. Enumeration: 'dot11g': 3, 'unknown': 1, 'dot11b': 2, 'dot11a': 4, 'dot11na': 6, 'dot11ng': 5, 'dot11ac': 7.
atkkWiAcClientChannel	1.3.6.1.4.1.207.8.42.6.2.1.1.4	integer32	read-only	The radio channel which the STA is using.
atkkWiAcClientAge	1.3.6.1.4.1.207.8.42.6.2.1.1.5	counter32	read-only	Time (in seconds) since the STA was associated.
atkkWiAcClientUserID	1.3.6.1.4.1.207.8.42.6.2.1.1.6	useridstring	read-only	UserID of the STA which is associated.
atkkWiAcAPs	1.3.6.1.4.1.207.8.42.6.3			Neighboring APs List. This list consists of entries which describe APs which is found by the AP.
atkkWiAcAPTable	1.3.6.1.4.1.207.8.42.6.3.1		no-access	A table that contains information about APs nearby.
atkkWiAcAPEntry	1.3.6.1.4.1.207.8.42.6.3.1.1		no-access	Information about a neighboring AP.
atkkWiAcAPAddress	1.3.6.1.4.1.207.8.42.6.3.1.1.1	macaddress	read-only	MAC address of the neighbor AP.
atkkWiAcAPSSID	1.3.6.1.4.1.207.8.42.6.3.1.1.2	ssidstring	read-only	SSID of the neighbor AP.
atkkWiAcAP80211Spec	1.3.6.1.4.1.207.8.42.6.3.1.1.3	integer	read-only	802.11 technology which the neighbor AP is using. Enumeration: 'dot11g': 3, 'unknown': 1, 'dot11b': 2, 'dot11a': 4, 'dot11na': 6, 'dot11ng': 5, 'dot11ac': 7.
atkkWiAcAPChannel	1.3.6.1.4.1.207.8.42.6.3.1.1.4	integer32	read-only	The radio channel which the neighbor AP is using.
atkkWiAcAPRSSI	1.3.6.1.4.1.207.8.42.6.3.1.1.5	integer32	read-only	RSSI (signal strength) of the neighbor AP.
atkkWiAcAPRadarDetected	1.3.6.1.4.1.207.8.42.6.3.1.1.6	trapstring	read-only	The message of Radar Detected.
atkkWiAcAPChannels	1.3.6.1.4.1.207.8.42.6.3.1.1.7	channelstring	read-only	The channels of Radar Detected.
atkkWiAcAPDetectConfig	1.3.6.1.4.1.207.8.42.6.3.2	integer	read-write	The enable/disable configuration of the Neighbor AP detection. wlan0/wlan1 for TQ2403/EX wlan0 for TQ2450/TQ3600/TQ3200/TQ3400/TQ4400/TQ4600/TQ4400e Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcAPDetectConfig2	1.3.6.1.4.1.207.8.42.6.3.3	integer	read-write	The enable/disable configuration of the Neighbor AP detection. wlan1 for TQ2450/TQ3600/TQ3400/TQ4400/TQ4600/TQ4400e Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcMacACL	1.3.6.1.4.1.207.8.42.6.4			MAC address filters List.
atkkWiAcMacACLTable	1.3.6.1.4.1.207.8.42.6.4.1		no-access	A table that contains MAC address filters.
atkkWiAcMacACLEntry	1.3.6.1.4.1.207.8.42.6.4.1.1		no-access	MAC address filter.
atkkWiAcMacACLAddress	1.3.6.1.4.1.207.8.42.6.4.1.1.1	macaddress	read-only	MAC address which is filtered.
atkkWiAcMacACLModeConfig	1.3.6.1.4.1.207.8.42.6.4.2	integer	read-write	The mode configuration of the MAC filtering. Enumeration: 'deny': 1, 'accept': 2.
atkkWiAcNotification	1.3.6.1.4.1.207.8.42.6.5
atkkWiAcNotificationObjects	1.3.6.1.4.1.207.8.42.6.5.0
atkkWiAcAssociated	1.3.6.1.4.1.207.8.42.6.5.0.1			This notification is sent when a STA was connected.
atkkWiAcDisassociated	1.3.6.1.4.1.207.8.42.6.5.0.2			This notification is sent when a STA was disconnected.
atkkWiAcUnknownAP	1.3.6.1.4.1.207.8.42.6.5.0.3			This notification is sent when an unknown AP was detected.
atkkWiAcFiltered	1.3.6.1.4.1.207.8.42.6.5.0.4			This notification is sent when an STA was denied by MAC filters.
atkkWiAcRadiusAuthSucceeded	1.3.6.1.4.1.207.8.42.6.5.0.5			This notification is sent when RADIUS authentication of an STA succeeded.
atkkWiAcRadiusAuthFailed	1.3.6.1.4.1.207.8.42.6.5.0.6			This notification is sent when RADIUS authentication of an STA failed.
atkkWiAcRadarDetected	1.3.6.1.4.1.207.8.42.6.5.0.7			This notification is sent when Radar detected.
atkkWiAcApInfo	1.3.6.1.4.1.207.8.42.6.6			AP information
atkkWiAcApInfoTrapTable	1.3.6.1.4.1.207.8.42.6.6.1		no-access	Table that contains information about a trap configuration of this AP.
atkkWiAcApInfoTrapEntry	1.3.6.1.4.1.207.8.42.6.6.1.1		no-access	Information about a trap configuration.
atkkWiAcApTrapHost	1.3.6.1.4.1.207.8.42.6.6.1.1.1	traphoststring	read-only	TrapHost configuration of this AP.
atkkWiAcApTrapCommunity	1.3.6.1.4.1.207.8.42.6.6.1.1.2	communitystring	read-only	TrapCommunity configuration of this AP.
atkkWiAcApTrapColdStartConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.3	integer	read-only	Enable/disable configuration of the ColdStart trap. Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcApTrapLinkConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.4	integer	read-only	Enable/disable configuration of the Link up/down trap. Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcApTrapAuthenticationConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.5	integer	read-only	Enable/disable configuration of the Authentication trap. Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcApTrapAssociationConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.6	integer	read-only	Enable/disable configuration of an STA Association/Disassociation trap. Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcApTrapUnknownApConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.7	integer	read-only	Enable/disable configuration of an Unknown AP detection trap. Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcApTrapFilteredStaConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.8	integer	read-only	Enable/disable configuration of a Filtered STA detection trap. Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcApTrapRadiusAuthSuccessConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.9	integer	read-only	Enable/disable configuration of the RADIUS Authentication success trap. Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcApTrapRadiusAuthFailConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.10	integer	read-only	Enable/disable configuration of the RADIUS Authentication fail trap. Enumeration: 'disabled': 2, 'enabled': 1.
atkkWiAcApTrapDfsDetectedConfig	1.3.6.1.4.1.207.8.42.6.6.1.1.11	integer	read-only	Enable/disable configuration of the DFS Detected trap. Enumeration: 'disabled': 2, 'enabled': 1.