AT-PTP-MIB: View SNMP OID List / Download MIB

This MIB file contains definitions of managed objects for the IEEE 1588v2 Precision Time Protocol (PTP) module.

Table of count information about the PTP system for all domains.

An entry in the table, containing count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unconfiguration of the PTP clock removes it.

This object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol. 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved

This object specifies the instance of the Clock for this domain.

This object specifies the total number of clock ports configured within a domain in the system.

Table of information about the PTP system for all clock modes -- ordinary, boundary or transparent.

An entry in the table, containing information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the total number of PTP domains for this particular clock type configured in this node.

This object specifies the PTP Profile implemented on the system.

Table of information about the PTP clock Current Datasets for all domains.

An entry in the table, containing information about a single PTP clock Current Datasets for a domain.

This object specifies the domain number used to create a logical group of PTP devices.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the instance of the clock for this clock type in the given domain.

The current clock dataset StepsRemoved value. This object specifies the distance measured by the number of Boundary clocks between the local clock and the Foreign master as indicated in the stepsRemoved field of Announce messages.

This object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock.

This object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mechanism.

Table of information about the PTP clock Parent Datasets for all domains.

An entry in the table, containing information about a single PTP clock Parent Datasets for a domain.

This object specifies the domain number used to create a logical group of PTP devices.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock.

This object specifies the Parent Dataset ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data.

This object specifies the Parent Dataset ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock.

This object specifies the clock's parent dataset ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by the slave clock.

This object specifies the parent dataset Grandmaster clock identity.

This object specifies the parent dataset Grandmaster clock priority1.

This object specifies the parent dataset grandmaster clock priority2.

This object specifies the parent dataset grandmaster clock quality class.

This object specifies the parent dataset grandmaster clock quality accuracy.

This object specifies the parent dataset grandmaster clock quality offset.

Table of information about the PTP clock Default Datasets for all domains.

An entry in the table, containing information about a single PTP clock Default Datasets for a domain.

This object specifies the domain number used to create a logical group of PTP devices.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies whether the Two Step process is used.

This object specifies the default Datasets clock identity.

This object specifies the default Datasets clock Priority1.

This object specifies the default Datasets clock Priority2.

Whether the SlaveOnly flag is set.

This object specifies the default dataset Quality Class.

This object specifies the default dataset Quality Accuracy.

This object specifies the default dataset Quality offset.

Table of information about the PTP clock Running Datasets for all domains.

An entry in the table, containing information about a single PTP clock running Datasets for a domain.

This object specifies the domain number used to create a Logical group of PTP devices.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the Clock state returned by a PTP engine which was described earlier. Freerun state. Applies to a slave device that is not locked to a master. This is the initial state a slave starts out with when it is not getting any PTP packets from the master, or because of some other input error (erroneous packets, etc). Holdover state. In this state the slave device is locked to a master but communication with the master has been lost or the timestamps in the PTP packets are incorrect. Since the slave was previously locked to the master, it can run in this state, with similar accuracy for some time. If communication with the master is not restored for an extended period (dependent on the clock implementation), the device should move to the FREERUN state. Acquiring state. The slave device is receiving packets from a master and is trying to acquire a lock. Freq_locked state. Slave device is locked to the Master with respect to frequency, but not phase aligned. Phase_aligned state. Locked to the master with respect to frequency and phase.

This object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters are discontinuous.

This object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters are discontinuous.

Table of information about the PTP clock time properties datasets for all domains.

An entry in the table, containing information about a single PTP clock timeproperties Datasets for a domain.

This object specifies the domain number used to create a logical group of PTP devices.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the timeproperties dataset value of whether the current UTC offset is valid.

This object specifies the timeproperties dataset value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentUtcOffset is the offset between TAI and UTC; otherwise the value has no meaning. The value shall be in units of seconds. The initialization value shall be selected as follows: a) If the timePropertiesDS.ptpTimescale (see 8.2.4.8) is TRUE, the value is the value obtained from a primary reference if the value is known at the time of initialization, else, b) The value shall be the current number of leap seconds (7.2.3) when the node is designed.

This object specifies the Leap59 value in the clock Current Dataset.

This object specifies the Leap61 value in the clock Current Dataset.

This object specifies the Time Traceable value in the clock Current Dataset.

This object specifies the Frequency Traceable value in the clock Current Dataset.

This object specifies the PTP Timescale value in the clock Current Dataset.

This object specifies the Timesource value in the clock Current Dataset.

Table of information about the PTP Transparent clock Default Datasets for all domains.

An entry in the table, containing information about a single PTP Transparent clock Default Datasets for a domain.

This object specifies the domain number used to create a logical group of PTP devices.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the value of the clockIdentity attribute of the local clock.

This object specifies the number of PTP ports of the device. These counters are discontinuous.

This object, if the transparent clock is an end-to-end transparent clock, has the value of E2E; if the transparent clock is a peer-to-peer transparent clock, the value shall be P2P.

This object specifies the value of the primary syntonization domain. The initialization value shall be 0.

Table of information about the clock ports for a particular domain.

An entry in the table, containing information about a single clock port.

This object specifies the domain number used to create a logical group of PTP devices.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the PTP Portnumber for this port.

This object specifies the PTP clock port name configured on the node.

This object describes the current role (slave/master) of the port.

This object specifies that two-step clock operation between the PTP master and slave device is enabled.

This object specifies the current peer's network address type used for PTP communication.

This object specifies the current peer's network address used for PTP communication.

This object specifies - For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters available to this slave port (might or might not be peered).

Table of information about the clock ports dataset for a particular domain.

An entry in the table, containing port dataset information for a single clock port.

This object specifies the domain number used to create a logical group of PTP devices.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the PTP portnumber associated with this PTP port.

This object specifies the PTP clock port dataset name.

This object specifies the PTP clock port Identity.

This object specifies the Announce message transmission interval associated with this clock port.

This object specifies the Announce receipt timeout associated with this clock port.

This object specifies the Sync message transmission interval.

This object specifies the Delay_Req message transmission interval.

This object specifies the Pdelay_Req message transmission interval.

This object specifies the delay mechanism used. If the clock is an end-to-end clock, the value of the is e2e, else if the clock is a peer to-peer clock, the value shall be p2p.

This object specifies the peer meanPathDelay.

This object specifies the grant duration allocated by the master.

This object specifies the PTP version being used.

Table of information about the clock ports running datasets for a particular domain.

An entry in the table, containing running dataset information about a single clock port.

This object specifies the domain number used to create a logical group of PTP devices.

This object specifies the clock type as defined in the Textual convention description.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the PTP portnumber associated with this clock port.

This object specifies the PTP clock port name.

This object specifies the port state returned by PTP engine. initializing - In this state a port initializes its data sets, hardware, and communication facilities. faulty - The fault state of the protocol. disabled - The port shall not place any messages on its communication path. listening - The port is waiting for the announceReceiptTimeout to expire or to receive an Announce message from a master. preMaster - The port shall behave in all respects as though it were in the MASTER state except that it shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling, or management messages. master - The port is behaving as a master port. passive - The port shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, or management messages that are a required response to another management message uncalibrated - The local port is preparing to synchronize to the master port. slave - The port is synchronizing to the selected master port.

This object specifies the Clock Role.

This object specifies the interface on the node being used by the PTP Clock for PTP communication.

This object specifies the transport protocol being used for PTP communication (the mapping used).

This object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN, Pseudowire encapsulation...) for the PTP messages.

This object specifies the clock transmission mode as unicast: Using unicast communication channel. multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel

This object specifies the clock receive mode as unicast: Using unicast communication channel. multicast: Using Multicast communication channel. multicast-mix: Using multicast-unicast communication channel

This object specifies the packets received on the clock port (cumulative). These counters are discontinuous.

This object specifies the packets sent on the clock port (cumulative). These counters are discontinuous.

Table of information about the Transparent clock ports running dataset for a particular domain.

An entry in the table, containing clock port Transparent dataset information about a single clock port

This object specifies the domain number used to create a Logical group of PTP devices.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the PTP port number associated with this port.

This object specifies the value of the PortIdentity attribute of the local port.

This object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval.

This object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally.

This object specifies, if the delayMechanism used is P2P, the value of the estimate of the current one-way propagation delay, i.e., on the link attached to this port, computed using the peer delay mechanism. If the value of the delayMechanism used is E2E, then the value will be zero.

Table of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port. For a slave port: the list of masters available for a given slave port. Session information (packets, errors) to be displayed based on availability and scenario.

An entry in the table, containing information about a single associated port for the given clockport.

This object specifies the given port's domain number.

This object specifies the given port's clock type.

This object specifies the instance of the clock for this clock type in the given domain.

This object specifies the PTP Port Number for the given port.

This object specifies the associated port's serial number in the current port's context.

This object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpWellKnownTransportTypes will be used in the values contained in the OCTET STRING.

This object specifies the peer port's network address used for PTP communication.

The number of packets sent to this peer port from the current port. These counters are discontinuous.

The number of packets received from this peer port by the current port. These counters are discontinuous.

This object specifies the input errors associated with the peer port. These counters are discontinuous.

This object specifies the output errors associated with the peer port. These counters are discontinuous.

IP version 4

IP version 6

Ethernet

Device NET

Control NET

IEC61158

Ethernet Encapsulation type.

VLAN Encapsulation type.

UDP/IP over MPLS Encapsulation type.

UDP/IP Pseudowire over MPLS Encapsulation type.

Ethernet Pseudowire over MPLS Encapsulation type.

Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide system level information of clock devices. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE.

Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE.

Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock port related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE.

Compliance statement for agents that provide read-only support for PTPBASE-MIB to provide Transparent clock related information. Such devices can only be monitored using this MIB module. The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE.

Group which aggregates objects describing system-wide information

Group which aggregates objects describing PTP Current Dataset information

Group which aggregates objects describing PTP Parent Dataset information

Group which aggregates objects describing PTP Default Dataset information

Group which aggregates objects describing PTP running state information

Group which aggregates objects describing PTP Time Properties information

Group which aggregates objects describing PTP Transparent Dataset information

Group which aggregates objects describing information for a given PTP Port.

Group which aggregates objects describing PTP Port Dataset information

Group which aggregates objects describing PTP running interface information

Group which aggregates objects describing PTP TransparentDS information

Group which aggregates objects describing information on peer PTP ports for a given PTP clock-port.