AT-ALMMON-MIB: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS


 Home MIB: AT-ALMMON-MIB
Download as:   
SNMPv2-CONF, AT-SYSINFO-MIB, SNMPv2-SMI, AT-SMI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 atAlmMon 1.3.6.1.4.1.207.8.4.4.3.26
The AT Alarm Monitoring MIB for managing and reporting device alarms.
       atAlmMonActionTable 1.3.6.1.4.1.207.8.4.4.3.26.1 no-access
A table of information describing alarm monitoring inputs and consequent actions (i.e. fault LED & relay outputs).
           atAlmMonActionEntry 1.3.6.1.4.1.207.8.4.4.3.26.1.1 no-access
The description and configuration of what to do for a specific monitored alarm.
               atAlmMonActionStackMemberId 1.3.6.1.4.1.207.8.4.4.3.26.1.1.1 unsigned32 read-only
The index of the stack member of this alarm action.
               atAlmMonActionIndex 1.3.6.1.4.1.207.8.4.4.3.26.1.1.2 unsigned32 read-only
The numeric identifier of this alarm action.
               atAlmMonAlarmType 1.3.6.1.4.1.207.8.4.4.3.26.1.1.3 atalmmonalarmtype read-only
The type of alarm that this action monitors.
               atAlmMonAlarmTypeSelection 1.3.6.1.4.1.207.8.4.4.3.26.1.1.4 unsigned32 read-only
The 1-based index of the alarm of the particular type (as catagorised by atAlmMonAlarmType).
               atAlmMonActionDescription 1.3.6.1.4.1.207.8.4.4.3.26.1.1.5 displaystringunsized read-only
The description of this alarm monitoring entry.
               atAlmMonActionUseRelay1 1.3.6.1.4.1.207.8.4.4.3.26.1.1.6 atalmmonactionuseoutput read-write
Indicates/controls whether or not this alarm monitor drives the first relay output.
               atAlmMonActionUseRelay2 1.3.6.1.4.1.207.8.4.4.3.26.1.1.7 atalmmonactionuseoutput read-write
Indicates/controls whether or not this alarm monitor drives the second relay output.
               atAlmMonActionUseRelay3 1.3.6.1.4.1.207.8.4.4.3.26.1.1.8 atalmmonactionuseoutput read-write
Indicates/controls whether or not this alarm monitor drives the third relay output.
               atAlmMonActionUseFaultLed 1.3.6.1.4.1.207.8.4.4.3.26.1.1.9 atalmmonactionuseoutput read-write
Indicates/controls whether or not this alarm monitor drives the fault LED.
               atAlmMonAbnormalState 1.3.6.1.4.1.207.8.4.4.3.26.1.1.10 atalmmonabnormalstate read-write
Indicates/sets the abnormal (i.e. alarm active) state for a contact input. Only used for contactInput alarm monitors, ignored for all other types.
               atAlmMonActionState 1.3.6.1.4.1.207.8.4.4.3.26.1.1.11 atalmmonactionstate read-only
Indicates the current state of this alarm monitor.
       atAlmMonPerStackConfiguration 1.3.6.1.4.1.207.8.4.4.3.26.2 truthvalue read-write
Indicates whether to support per stack member configuration. A true value means that atAlmMonAvailableTable, atAlmMonOutputRelayTable, atAlmMonOutputLedTable and atAlmMonIutputContactTable are supported. A notTrue value means that atAlmMonActionTable is supported. This object should be set to a value that reflects the way that alarm monitors are actually configured or to be configured.
       atAlmMonAvailableTable 1.3.6.1.4.1.207.8.4.4.3.26.3 no-access
A table of information listing available alarms on the device.
           atAlmMonAvailableEntry 1.3.6.1.4.1.207.8.4.4.3.26.3.1 no-access
The description and configuration of each available alarm.
               atAlmMonAvailableAlarmId 1.3.6.1.4.1.207.8.4.4.3.26.3.1.1 unsigned32 read-only
The unique numeric identifier for this alarm.
               atAlmMonAvailableType 1.3.6.1.4.1.207.8.4.4.3.26.3.1.2 atalmmonalarmtype read-only
The type of this alarm, such as externalPSU(1), epsr(2), etc.
               atAlmMonAvailableTypeIndex 1.3.6.1.4.1.207.8.4.4.3.26.3.1.3 unsigned32 read-only
The index of the particular alarm type (catagorised by atAlmMonAlarmType). For some alarms there are multiple sources on the device (i.e. power supplies). In these cases this object indicates which source the alarm is for (i.e. power supply 1, or power supply 2). This object is used for externalPSU(1) and contactInput(3) alarm only.
               atAlmMonAvailableStkId 1.3.6.1.4.1.207.8.4.4.3.26.3.1.4 unsigned32 read-only
The id of stack member this alarm triggers on. This object is used for externalPSU(1), contactInput(3), portLinkDown(4), portPoeFailure(7) and temperature(8) alarm only.
               atAlmMonAvailableIfName 1.3.6.1.4.1.207.8.4.4.3.26.3.1.5 displaystringunsized read-only
The name of the specific interface that this alarm triggers on, such as 'port1.0.1. This object is used for portLinkDown(4) and portPoeFailure(7) alarm only.
               atAlmMonAvailableState 1.3.6.1.4.1.207.8.4.4.3.26.3.1.6 atalmmonactionstate read-only
Indicates the current state of this alarm.
       atAlmMonOutputRelayTable 1.3.6.1.4.1.207.8.4.4.3.26.4 no-access
This table lists all associations existing on the device between output relays and alarms. Theoretically, an output relay on the device can be triggered by multiple alarms and an alarm can trigger multiple output relays.
           atAlmMonOutputRelayEntry 1.3.6.1.4.1.207.8.4.4.3.26.4.1 no-access
This entry reprents an association between one ouput relay and one alarm. To configure an alarm to use an output relay, a user needs to create a new entry. This can be done through writing a value of used(2) to object atAlmMonOutputRelayUsage that is specified by atAlmMonOutputRelayStkId, atAlmMonOutputRelayNumber, and atAlmMonOutputRelayAlarmId. To reconfigure an alarm not to use an output relay, a user needs to delete the entry. This can be done by writing a value of unused(1) to object atAlmMonOutputRelayUsage.
               atAlmMonOutputRelayStkId 1.3.6.1.4.1.207.8.4.4.3.26.4.1.1 unsigned32 read-only
The id of stack member that the relay(s) reside on.
               atAlmMonOutputRelayNumber 1.3.6.1.4.1.207.8.4.4.3.26.4.1.2 unsigned32 read-only
The number (i.e. the 1 based index) of the relay.
               atAlmMonOutputRelayAlarmId 1.3.6.1.4.1.207.8.4.4.3.26.4.1.3 unsigned32 read-only
The id of the alarm that may use this relay output.
               atAlmMonOutputRelayUsage 1.3.6.1.4.1.207.8.4.4.3.26.4.1.4 atalmmonactionuseoutput read-write
This object indicates whether or not the relay output is used. Since there are entries only for existing associations between the output relays and the alarms, the object value should be always used(2). If a user sets a value of unused(1) to this object, then the whole entry will be deleted. If a user sets a value of used(2) to this object with new index, then a new entry should be created if stack member id, relay number and alarm id are specified properly in the index.
       atAlmMonOutputLedTable 1.3.6.1.4.1.207.8.4.4.3.26.5 no-access
This table lists all associations existing on the device between output LED(s) and alarms. Theoretically, an output LED on the device can be triggered by multiple alarms and an alarm can trigger multiple LED(s).
           atAlmMonOutputLedEntry 1.3.6.1.4.1.207.8.4.4.3.26.5.1 no-access
This entry reprents an association between one LED and one alarm. To configure an alarm to use an output LED, a user needs to create a new entry. This can be done through writing a value of used(2) to object atAlmMonOutputLedUsage that is specified by atAlmMonOutputLedStkId and atAlmMonOutputRelayAlarmId. To reconfigure an alarm not to use an output LED, a user needs to delete the entry. This can be done by writing a value of unused(1) to object atAlmMonOutputLedUsage.
               atAlmMonOutputLedStkId 1.3.6.1.4.1.207.8.4.4.3.26.5.1.1 unsigned32 read-only
The id of stack member that the output LED resides on.
               atAlmMonOutputLedAlarmId 1.3.6.1.4.1.207.8.4.4.3.26.5.1.2 unsigned32 read-only
The id of the alarm that may use this output LED.
               atAlmMonOutputLedUsage 1.3.6.1.4.1.207.8.4.4.3.26.5.1.3 atalmmonactionuseoutput read-write
This object indicates whether or not an LED is used. Since there are entries only for existing associations between the output LED(s) and the alarms, the object value should be always used(2). If a user sets a value of unused(1) to this object, then the whole entry will be deleted. If a user sets a value of used(2) to this object with new index, then a new entry should be created if stack member id and alarm id are specified properly in the index.
       atAlmMonInputContactTable 1.3.6.1.4.1.207.8.4.4.3.26.6 no-access
This table lists all input contacts on the device and their positions.
           atAlmMonInputContactEntry 1.3.6.1.4.1.207.8.4.4.3.26.6.1 no-access
The information of each input contact configuration.
               atAlmMonInputContactStkId 1.3.6.1.4.1.207.8.4.4.3.26.6.1.1 unsigned32 read-only
The id of stack member that the input contact reside on.
               atAlmMonInputContactNumber 1.3.6.1.4.1.207.8.4.4.3.26.6.1.2 unsigned32 read-only
The number (i.e. the 1 based index) of the input contact.
               atAlmMonInputContactPosition 1.3.6.1.4.1.207.8.4.4.3.26.6.1.3 atalmmoncontactposition read-write
This object represents the position of the input contact. It is either open or closed. A user can reconfigure the position of an input contact by setting a different value to this object.