ASCEND-SDSL-MIB: View SNMP OID List / Download MIB

VENDOR: ASCEND COMMUNICATIONS INC.


 Home MIB: ASCEND-SDSL-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ASCEND-WAN-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sdslLineStatusTable 1.3.6.1.4.1.529.4.8.1 no-access
SDSL status parameters.
     sdslLineStatusEntry 1.3.6.1.4.1.529.4.8.1.1 no-access
An interface status entry containing objects to describe the interface.
         sdslStatusIfEntryIndex 1.3.6.1.4.1.529.4.8.1.1.1 integer read-only
Interface group index assigned to this port.
         sdslStatusShelfIndex 1.3.6.1.4.1.529.4.8.1.1.2 integer read-only
TNT's SDSL modules Shelf ID.
         sdslStatusSlotIndex 1.3.6.1.4.1.529.4.8.1.1.3 integer read-only
TNT's SDSL modules Slot ID.
         sdslStatusLineIndex 1.3.6.1.4.1.529.4.8.1.1.4 integer read-only
SDSL modules line ID.
         sdslStatusUnitType 1.3.6.1.4.1.529.4.8.1.1.5 integer read-only
Unit type defines if the unit is operating either as a Central Office Equipment (COE) or Customer Premiss equipment (CPE). Enumeration: 'other': 1, 'coe': 2, 'cpe': 3.
         sdslStatusLineState 1.3.6.1.4.1.529.4.8.1.1.6 integer read-only
Interface state describes the current ports operating state. States are: Config, Pend Down, Up, Down, Start-up, or N/A. Enumeration: 'configure': 2, 'deactive-lost': 4, 'deactivate': 3, 'start-up': 5, 'up': 7, 'pend-port-up': 6, 'other': 1, 'pend-deactivate': 8, 'out-of-service': 9.
         sdslStatusUpRate 1.3.6.1.4.1.529.4.8.1.1.7 integer read-write
The current up stream (cpe to coe) rate The object dslStatusUpRate is deprecated. To set line rate the object sdslConfigLineRate of the new sdslLineConfigTable should be used. Enumeration: 'k144000': 144000, 'k160000': 160000, 'm1568000': 1568000, 'm1536000': 1536000, 'k384000': 384000, 'k208000': 208000, 'k784000': 784000, 'm1152000': 1152000, 'm1552000': 1552000, 'm1168000': 1168000, 'k528000': 528000, 'k416000': 416000, 'k400000': 400000, 'k192000': 192000, 'k768000': 768000, 'm1040000': 1040000, 'm2320000': 2320000, 'k272000': 272000.
         sdslStatusDownRate 1.3.6.1.4.1.529.4.8.1.1.8 integer read-write
The current down stream (coe to cpe) rate The object dslStatusDownRate is deprecated. To set line rate the object sdslConfigLineRate of the new sdslLineConfigTable should be used. Enumeration: 'k144000': 144000, 'k160000': 160000, 'm1568000': 1568000, 'm1536000': 1536000, 'k384000': 384000, 'k208000': 208000, 'k784000': 784000, 'm1152000': 1152000, 'm1552000': 1552000, 'm1168000': 1168000, 'k528000': 528000, 'k416000': 416000, 'k400000': 400000, 'k192000': 192000, 'k768000': 768000, 'm1040000': 1040000, 'm2320000': 2320000, 'k272000': 272000.
         sdslStatusVendorId 1.3.6.1.4.1.529.4.8.1.1.9 integer read-only
Vendor identification.
         sdslStatusMajorFirmWareVer 1.3.6.1.4.1.529.4.8.1.1.10 integer read-only
Major firmware version.
         sdslStatusMinorFirmWareVer 1.3.6.1.4.1.529.4.8.1.1.11 integer read-only
Minor firmware version.
         sdslStatusHardWareVer 1.3.6.1.4.1.529.4.8.1.1.12 integer read-only
Hardware version.
         sdslStatusLineRate 1.3.6.1.4.1.529.4.8.1.1.13 integer read-only
The current line rate Enumeration: 'k144000': 144000, 'k160000': 160000, 'm1568000': 1568000, 'm1536000': 1536000, 'k384000': 384000, 'k208000': 208000, 'unknown': 1, 'm1152000': 1152000, 'm1552000': 1552000, 'm1168000': 1168000, 'k528000': 528000, 'k416000': 416000, 'k784000': 784000, 'k400000': 400000, 'k192000': 192000, 'k768000': 768000, 'm1040000': 1040000, 'm2320000': 2320000, 'k272000': 272000.
 sdslLineStatisticTable 1.3.6.1.4.1.529.4.8.2 no-access
SDSL statistical parameters.
     sdslLineStatisticEntry 1.3.6.1.4.1.529.4.8.2.1 no-access
An interface statistical entry containing objects to describe the interface.
         sdslStatIfEntryIndex 1.3.6.1.4.1.529.4.8.2.1.1 integer read-only
The interface groups interface index is used to index into this table.
         sdslStatShelfIndex 1.3.6.1.4.1.529.4.8.2.1.2 integer read-only
SDSL modules Shelf ID.
         sdslStatSlotIndex 1.3.6.1.4.1.529.4.8.2.1.3 integer read-only
SDSL modules Slot ID.
         sdslStatLineIndex 1.3.6.1.4.1.529.4.8.2.1.4 integer read-only
SDSL modules interface ID.
         sdslStatConnUpDays 1.3.6.1.4.1.529.4.8.2.1.5 integer read-only
Connection up day count.
         sdslStatConnUpHours 1.3.6.1.4.1.529.4.8.2.1.6 integer read-only
Connection Up 24 hour count.
         sdslStatConnUpMinutes 1.3.6.1.4.1.529.4.8.2.1.7 integer read-only
Connection up minute count.
         sdslStatRxSignalPresent 1.3.6.1.4.1.529.4.8.2.1.8 integer read-only
Receive signal present detection. Enumeration: 'yes': 2, 'no': 1.
         sdslStatLineQualityDb 1.3.6.1.4.1.529.4.8.2.1.9 integer read-only
Lines noise margin. Reliable data will transfer with a reading of -5db or greater.
         sdslStatUpDwnCntr 1.3.6.1.4.1.529.4.8.2.1.10 integer read-only
Line Up Down counter value displays the number of times the interface transitions from a down to up state.
         sdslStatLineSelfTest 1.3.6.1.4.1.529.4.8.2.1.11 integer read-only
Line hardware self test results (Passed or Failed). Enumeration: 'other': 4, 'passed': 3, 'localLoopBackFailed': 2, 'selfTestFailed': 1.
         sdslStatBertTimer 1.3.6.1.4.1.529.4.8.2.1.12 integer read-write
BER test duration configuration. The BER test lasts for the duration of this timer. Enumeration: 'three-minutes': 3, 'four-minutes': 4, 'fifteen-minutes': 7, 'thirty-minutes': 9, 'two-minutes': 2, 'twenty-minutes': 8, 'five-minutes': 5, 'ten-minutes': 6, 'one-minute': 1.
         sdslStatBertEna 1.3.6.1.4.1.529.4.8.2.1.13 integer read-write
Enable/disable of the BER test. If nodes are connected, then the BER test is ran between the units. If this node is not connected to a remote node, then the interface is placed into analog loopback and the BER test is started. Enumeration: 'yes': 2, 'no': 1.
         sdslStatBertState 1.3.6.1.4.1.529.4.8.2.1.14 integer read-only
BER test states. When this node is not connected to another node, the test is disabled. When two nodes are connected then the BER test waits for the other node to start it's BER test and then starts collecting bit errors immediately. Enumeration: 'bert-los': 6, 'start-up': 3, 'waiting': 4, 'stopped': 2, 'active': 1, 'pend-active': 5.
         sdslStatBertErrorCounter 1.3.6.1.4.1.529.4.8.2.1.15 integer read-only
BER test bit error counter.
 sdslLineConfigTable 1.3.6.1.4.1.529.4.8.3 no-access
SDSL status parameters.
     sdslLineConfigEntry 1.3.6.1.4.1.529.4.8.3.1 no-access
An interface status entry containing objects to describe the interface.
         sdslConfigIfEntryIndex 1.3.6.1.4.1.529.4.8.3.1.1 integer read-only
Interface group index assigned to this port.
         sdslConfigShelfIndex 1.3.6.1.4.1.529.4.8.3.1.2 integer read-only
TNT's SDSL modules Shelf ID.
         sdslConfigSlotIndex 1.3.6.1.4.1.529.4.8.3.1.3 integer read-only
TNT's SDSL modules Slot ID.
         sdslConfigLineIndex 1.3.6.1.4.1.529.4.8.3.1.4 integer read-only
SDSL modules line ID.
         sdslConfigLineRate 1.3.6.1.4.1.529.4.8.3.1.5 integer read-write
The current line rate Enumeration: 'k144000': 144000, 'k160000': 160000, 'm1568000': 1568000, 'm1536000': 1536000, 'k384000': 384000, 'k208000': 208000, 'unknown': 1, 'm1152000': 1152000, 'm1552000': 1552000, 'm1168000': 1168000, 'k528000': 528000, 'k416000': 416000, 'k784000': 784000, 'k400000': 400000, 'k192000': 192000, 'k768000': 768000, 'm1040000': 1040000, 'm2320000': 2320000, 'k272000': 272000.