ASCEND-MIBT1NET-MIB: View SNMP OID List / Download MIB

VENDOR: ASCEND COMMUNICATIONS INC.


 Home MIB: ASCEND-MIBT1NET-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mibt1NetworkProfileV1 1.3.6.1.4.1.529.23.126
         mibt1NetworkProfileV1Table 1.3.6.1.4.1.529.23.126.1 no-access
A list of mibt1NetworkProfile_v1 profile entries.
             mibt1NetworkProfileV1Entry 1.3.6.1.4.1.529.23.126.1.1 no-access
A mibt1NetworkProfile_v1 entry containing objects that maps to the parameters of mibt1NetworkProfile_v1 profile.
                 t1NetworkProfileV1_ProfileNumber 1.3.6.1.4.1.529.23.126.1.1.1 integer read-write
For potential backwards compatibility. The current design consists of one line profile numbered 0.
                 t1NetworkProfileV1_Name 1.3.6.1.4.1.529.23.126.1.1.2 displaystring read-only
Name of DS1 line.
                 t1NetworkProfileV1_PhysicalAddress_Shelf 1.3.6.1.4.1.529.23.126.1.1.3 integer read-write
The number of the shelf that the addressed physical device resides on. Enumeration: 'anyShelf': 1, 'shelf2': 3, 'shelf3': 4, 'shelf1': 2, 'shelf6': 7, 'shelf7': 8, 'shelf4': 5, 'shelf5': 6, 'shelf8': 9, 'shelf9': 10.
                 t1NetworkProfileV1_PhysicalAddress_Slot 1.3.6.1.4.1.529.23.126.1.1.4 integer read-write
The number of the slot that the addressed physical device resides on. Enumeration: 'aLim': 55, 'bLim': 56, 'trunkModule2': 46, 'slot36': 37, 'firstControlModule': 53, 'trunkModule1': 45, 'rightController': 50, 'slot28': 29, 'slot29': 30, 'slot24': 25, 'slot25': 26, 'slot26': 27, 'slot27': 28, 'slot20': 21, 'slot21': 22, 'slot22': 23, 'slot23': 24, 'slotPrimary': 59, 'cLim': 57, 'slot40': 41, 'secondControlModule': 54, 'leftController': 49, 'slot39': 40, 'controlModule': 51, 'slot9': 10, 'slot8': 9, 'controller': 42, 'slot38': 39, 'slot1': 2, 'slot3': 4, 'slot2': 3, 'slot5': 6, 'slot4': 5, 'slot7': 8, 'slot6': 7, 'slot11': 12, 'slot10': 11, 'slot13': 14, 'slot12': 13, 'slot15': 16, 'slot14': 15, 'slot17': 18, 'slot16': 17, 'slot19': 20, 'slot18': 19, 'slot31': 32, 'slot30': 31, 'slot37': 38, 'anySlot': 1, 'slot35': 36, 'slot34': 35, 'slot33': 34, 'dLim': 58, 'slot32': 33.
                 t1NetworkProfileV1_PhysicalAddress_ItemNumber 1.3.6.1.4.1.529.23.126.1.1.5 integer read-write
A number that specifies an addressable entity within the context of shelf and slot.
                 t1NetworkProfileV1_BackToBack 1.3.6.1.4.1.529.23.126.1.1.6 integer read-write
Indicates whether the Multiband is connected back-to-back to another Muliband, rather than a DPNSS PBX. If this field is TRUE, than we don't need to disable receiving interrupts when too many are coming in beyond our processing power. NOTE: GPT's iSDX keeps re-transmitting a frame at 8 ms intervals until it receives an acknowledgement. Enumeration: 'true': 2, 'false': 1.
                 t1NetworkProfileV1_PrimaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.7 integer read-write
This is the use of the first T1 interface. Enumeration: 'dropAndInsert': 4, 'dualNetworkInterface': 5, 'tOnlineZgrInterface': 7, 't1LineQuiesce': 3, 'tOnlineUsrInterface': 6, 'lineUnavailable': 1, 'lineDisable': 2.
                 t1NetworkProfileV1_SecondaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.8 integer read-write
The Multiband uses the first T1 interface as the primary interface and treats the secondary interface special. This is the use of the second interface. Enumeration: 'dropAndInsert': 4, 'dualNetworkInterface': 5, 'tOnlineZgrInterface': 7, 't1LineQuiesce': 3, 'tOnlineUsrInterface': 6, 'lineUnavailable': 1, 'lineDisable': 2.
                 t1NetworkProfileV1_TertiaryChannelUsage 1.3.6.1.4.1.529.23.126.1.1.9 integer read-write
This is the use of the 3rd T1 interface. Enumeration: 'dropAndInsert': 4, 'dualNetworkInterface': 5, 'tOnlineZgrInterface': 7, 't1LineQuiesce': 3, 'tOnlineUsrInterface': 6, 'lineUnavailable': 1, 'lineDisable': 2.
                 t1NetworkProfileV1_Action_o 1.3.6.1.4.1.529.23.126.1.1.10 integer read-write
Enumeration: 'deleteProfile': 3, 'createProfile': 2, 'noAction': 1.
         mibt1NetworkProfileV1_LineInterfaceTable 1.3.6.1.4.1.529.23.126.2 no-access
A list of mibt1NetworkProfile_v1__line_interface profile entries.
             mibt1NetworkProfileV1_LineInterfaceEntry 1.3.6.1.4.1.529.23.126.2.1 no-access
A mibt1NetworkProfile_v1__line_interface entry containing objects that maps to the parameters of mibt1NetworkProfile_v1__line_interface profile.
                 t1NetworkProfileV1_LineInterface_Name 1.3.6.1.4.1.529.23.126.2.1.1 displaystring read-only
                 t1NetworkProfileV1_LineInterface_Index_o 1.3.6.1.4.1.529.23.126.2.1.2 integer read-only
                 t1NetworkProfileV1_LineInterface_Enabled 1.3.6.1.4.1.529.23.126.2.1.3 integer read-write
TRUE if the line is enabled, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfileV1_LineInterface_TOnlineType 1.3.6.1.4.1.529.23.126.2.1.4 integer read-write
The tonline type of an e1 line. Enumeration: 'none': 1, 'te': 3, 'nt': 2, 'numberOfTonline': 4.
                 t1NetworkProfileV1_LineInterface_FrameType 1.3.6.1.4.1.529.23.126.2.1.5 integer read-write
The super-framing mode that is used on the physical link(s). Enumeration: 'esf': 2, 'd4': 1, 'g703': 3, 'n-2ds': 4.
                 t1NetworkProfileV1_LineInterface_Encoding 1.3.6.1.4.1.529.23.126.2.1.6 integer read-write
The layer 1 line encoding used for the physical link(s). Enumeration: 'ami': 1, 'none': 4, 'hdb3': 3, 'b8zs': 2.
                 t1NetworkProfileV1_LineInterface_ClockSource 1.3.6.1.4.1.529.23.126.2.1.7 integer read-write
Enumeration: 'notEligible': 2, 'eligible': 1.
                 t1NetworkProfileV1_LineInterface_ClockPriority 1.3.6.1.4.1.529.23.126.2.1.8 integer read-write
Clock priority assigned to the T1 line. Used to select particular lines as clock source. Enumeration: 'highPriority': 2, 'lowPriority': 4, 'middlePriority': 3.
                 t1NetworkProfileV1_LineInterface_SignalingMode 1.3.6.1.4.1.529.23.126.2.1.9 integer read-write
Inband, ISDN, ISDN_NFAS, PBX or SS7 signaling. Enumeration: 'e1MalaysiaSignaling': 19, 'h248DataTrunk': 34, 'e1PhilippineSignaling': 15, 'e1KoreanSignaling': 6, 'e1ThailandSignaling': 22, 'isdn': 2, 'inbandFgdInFgcOut': 29, 'inbandFgcInFgcOut': 30, 'e1ArgentinaSignaling': 13, 'inbandFgdInFgdOut': 28, 'e1DpnssSignaling': 11, 'e1NewZealandSignaling': 20, 'e1BrazilSignaling': 14, 'e1VietnamSignaling': 32, 'tunneledPriSignaling': 27, 'isdnNfas': 3, 'e1MexicoSignaling': 24, 'inband': 1, 'e1P7Signaling': 7, 'ss7SigTrunk': 33, 'e1CzechSignaling': 17, 'e1ChineseSignaling': 8, 'dtmfR2Signaling': 25, 'e1KuwaitSignaling': 23, 'e1R2Signaling': 5, 'e1NoSignaling': 10, 'e1IsraelSignaling': 21, 'e1MeteredSignaling': 9, 'inbandFgcInFgdOut': 31, 'e1IndianSignaling': 16.
                 t1NetworkProfileV1_LineInterface_IsdnEmulationSide 1.3.6.1.4.1.529.23.126.2.1.10 integer read-write
Side the line will emulate: TE (user), or NT (network). Enumeration: 'te': 1, 'nt': 2.
                 t1NetworkProfileV1_LineInterface_RobbedBitMode 1.3.6.1.4.1.529.23.126.2.1.11 integer read-write
Wink start, idle start, incoming wink. Enumeration: 'incW400': 4, 'loopStart': 5, 'incW200': 3, 'idleStart': 2, 'groundStart': 6, 'winkStart': 1.
                 t1NetworkProfileV1_LineInterface_DefaultCallType 1.3.6.1.4.1.529.23.126.2.1.12 integer read-write
Specify the default call-type for incoming calls, for purposes of call routing and signalling. Enumeration: 'dnisOrDigital': 4, 'dnisOrVoip': 6, 'dnisOrVoice': 3, 'digital': 1, 'voice': 2, 'voip': 5.
                 t1NetworkProfileV1_LineInterface_SwitchType 1.3.6.1.4.1.529.23.126.2.1.13 integer read-write
The network switch type, needed for ISDN/NFAS signaling. Enumeration: 'btnr191Bri': 20, 'belgianBri': 24, 'islxDpnss': 12, 'mercuryDpnss': 13, 'switchCas': 29, 'taiwanPri': 31, 'german1tr6Bri': 27, 'globandPri': 3, 'japanPri': 4, 'unknownBri': 15, 'idslPtpBri': 30, 'btSs7': 32, 'ntiPri': 2, 'vn2Bri': 19, 'kddBri': 23, 'att5essBri': 16, 'isdxDpnss': 11, 'ptpNet3Bri': 22, 'vn3Pri': 5, 'dms100Nt1Bri': 17, 'danishPri': 8, 'dass2': 14, 'attPri': 1, 'swissBri': 26, 'net5Pri': 7, 'natIsdn2Pri': 10, 'australBri': 25, 'nisdn1Bri': 18, 'australPri': 9, 'onetr6Pri': 6, 'dutch1tr6Bri': 28, 'net3Bri': 21.
                 t1NetworkProfileV1_LineInterface_NfasGroupId 1.3.6.1.4.1.529.23.126.2.1.14 integer read-write
For NFAS lines: the nfas group id. Not used with robbed bit signaling.
                 t1NetworkProfileV1_LineInterface_NfasId 1.3.6.1.4.1.529.23.126.2.1.15 integer read-write
For NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit signaling.
                 t1NetworkProfileV1_LineInterface_IncomingCallHandling 1.3.6.1.4.1.529.23.126.2.1.16 integer read-write
This parameter is used to determine the type of processing required for incoming calls from this line. Enumeration: 'ss7GatewayProcessing': 3, 'rejectAll': 1, 'internalProcessing': 2.
                 t1NetworkProfileV1_LineInterface_DeleteDigits 1.3.6.1.4.1.529.23.126.2.1.17 integer read-write
Number of digits to delete from numbers received from a PBX.
                 t1NetworkProfileV1_LineInterface_AddDigitString 1.3.6.1.4.1.529.23.126.2.1.18 displaystring read-write
String of digits to prepend to phone number received from PBX.
                 t1NetworkProfileV1_LineInterface_CallByCall 1.3.6.1.4.1.529.23.126.2.1.19 integer read-write
Call-by-call value to set when routing calls from PBX to network.
                 t1NetworkProfileV1_LineInterface_PbxAnswerNumber 1.3.6.1.4.1.529.23.126.2.1.20 displaystring read-write
The answer number that is the equivalent of a port answer-number used for the network to pbx routing.
                 t1NetworkProfileV1_LineInterface_AnswerService 1.3.6.1.4.1.529.23.126.2.1.21 integer read-write
The switched service type (or none) that is used for routing network calls to the pbx. Enumeration: 'modem': 43, 'n-1024Clear': 24, 'x30RestrictedBearer': 39, 'n-2456krV110': 51, 'n-64kClear': 3, 'n-14464krV110': 80, 'v32': 66, 'n-1600Clear': 32, 'n-38456krV110': 55, 'n-64kX30Restricted': 41, 'n-1280Clear': 28, 'n-1856Clear': 36, 'n-28864krV110': 81, 'n-19264kV110': 59, 'n-896Clear': 22, 'n-192kClear': 11, 'n-9656krV110': 53, 'n-512Clear': 16, 'n-144kClear': 255, 'n-576Clear': 17, 'n-448Clear': 15, 'n-960Clear': 23, 'n-2464kV110': 56, 'n-4856kV110': 47, 'n-4856krV110': 52, 'n-14456kV110': 74, 'frameRelaySvc': 71, 'n-9664krV110': 63, 'iptoip': 263, 'n-19256krV110': 54, 'v110ClearBearer': 40, 'n-56kRestricted': 2, 'n-704Clear': 19, 'n-1088Clear': 25, 'n-1344Clear': 29, 'wormarq': 73, 'n-14464kV110': 78, 'atmodem': 44, 'n-9656kV110': 48, 'vpnTunnel': 72, 'n-28856krV110': 77, 'n-19264krV110': 64, 'n-38464kV110': 60, 'n-1472Clear': 31, 'atmSvc': 70, 'n-9664kV110': 58, 'n-4864krV110': 62, 'n-38456kV110': 50, 'n-14456krV110': 76, 'n-1536kClear': 8, 'n-1216Clear': 27, 'n-28856kV110': 75, 'n-2464krV110': 61, 'n-384kRestricted': 6, 'n-1792Clear': 35, 'n-56kClear': 5, 'n-320kClear': 13, 'n-19256kV110': 49, 'n-768Clear': 20, 'dws384Clear': 14, 'n-2456kV110': 46, 'voice': 1, 'n-1536kRestricted': 9, 'n-64kRestricted': 4, 'n-128kClear': 10, 'n-4864kV110': 57, 'n-384kClear': 7, 'n-1920Clear': 37, 'phs64k': 67, 'n-1728Clear': 34, 'n-1152Clear': 26, 'n-1664Clear': 33, 'n-56kV110Clear': 42, 'n-1408Clear': 30, 'n-256kClear': 12, 'voiceOverIp': 68, 'n-28864kV110': 79, 'n-832Clear': 21, 'n-640Clear': 18, 'modem31khzAudio': 82, 'n-38464krV110': 65, 'x25Svc': 83.
                 t1NetworkProfileV1_LineInterface_oPBXType 1.3.6.1.4.1.529.23.126.2.1.22 integer read-write
The PBX Class as defined in the enumeration above. Enumeration: 'hostPbxLeasedData': 3, 'hostPbxLeased11': 4, 'hostPbxVoice': 1, 'hostPbxData': 2.
                 t1NetworkProfileV1_LineInterface_DataSense 1.3.6.1.4.1.529.23.126.2.1.23 integer read-write
D-channel normal or inverted data. Currently unused (normal data is always selected. Enumeration: 'inv': 2, 'normal': 1.
                 t1NetworkProfileV1_LineInterface_IdleMode 1.3.6.1.4.1.529.23.126.2.1.24 integer read-write
D-channel mark or flag idle. Currently unused (flag idle is always selected. Enumeration: 'flagIdle': 2, 'markIdle': 1.
                 t1NetworkProfileV1_LineInterface_oFDL 1.3.6.1.4.1.529.23.126.2.1.25 integer read-write
Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise. Enumeration: 'atNT': 2, 'none': 1, 'sprint': 4, 'ansi': 3.
                 t1NetworkProfileV1_LineInterface_FrontEndType 1.3.6.1.4.1.529.23.126.2.1.26 integer read-write
The front end type (CSU/DSX) of the T1 transceiver. Enumeration: 'cs': 1, 'dsx': 2.
                 t1NetworkProfileV1_LineInterface_oDSXLineLength 1.3.6.1.4.1.529.23.126.2.1.27 integer read-write
The length of the physical T1 line (for DSX lines). Enumeration: 'n-400533': 4, 'n-1133': 1, 'n-534655': 5, 'n-267399': 3, 'n-134266': 2.
                 t1NetworkProfileV1_LineInterface_oCSUBuildOut 1.3.6.1.4.1.529.23.126.2.1.28 integer read-write
Line buildout value for CSU lines. Enumeration: 'n-2255Db': 4, 'n-15Db': 3, 'n-75Db': 2, 'n-0Db': 1.
                 t1NetworkProfileV1_LineInterface_OverlapReceiving 1.3.6.1.4.1.529.23.126.2.1.29 integer read-write
TRUE if overlap receiving procedure may be used to handle incoming call, FALSE if not Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfileV1_LineInterface_PriPrefixNumber 1.3.6.1.4.1.529.23.126.2.1.30 displaystring read-write
The unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits when overlap receiving procedure is used to handle the incoming call. Defaults to '' to not count the trailing digits.
                 t1NetworkProfileV1_LineInterface_TrailingDigits 1.3.6.1.4.1.529.23.126.2.1.31 integer read-write
Number of trailing digits expected from the called party number information elements of INFORMATION messages when overlap receiving procedure is used to handle the incoming call. SETUP message may contain some trailing digits in the called party number information element. Defaults to 2.
                 t1NetworkProfileV1_LineInterface_T302Timer 1.3.6.1.4.1.529.23.126.2.1.32 integer read-write
Number of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving procedure. Defaults to 10000.
                 t1NetworkProfileV1_LineInterface_Layer3End 1.3.6.1.4.1.529.23.126.2.1.33 integer read-write
If x-side, layer 3 favors outgoing call when a call collision occurs. Enumeration: 'true': 2, 'false': 1.
                 t1NetworkProfileV1_LineInterface_Layer2End 1.3.6.1.4.1.529.23.126.2.1.34 integer read-write
This parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, and the other side acts as a PBX. If a-side, layer 2 acts as ET. Enumeration: 'true': 2, 'false': 1.
                 t1NetworkProfileV1_LineInterface_NlValue 1.3.6.1.4.1.529.23.126.2.1.35 integer read-write
Number of re-transmissions; default to 64.
                 t1NetworkProfileV1_LineInterface_LoopAvoidance 1.3.6.1.4.1.529.23.126.2.1.36 integer read-write
Loop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7).
                 t1NetworkProfileV1_LineInterface_MaintenanceState 1.3.6.1.4.1.529.23.126.2.1.37 integer read-write
TRUE if the line is in user-requested maintenance mode, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfileV1_LineInterface_NumberComplete 1.3.6.1.4.1.529.23.126.2.1.38 integer read-write
The criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, 14, or 15 digits received, or the end-of-pulsing signal received, or time-out. Enumeration: 'n-6Digits': 6, 'n-10Digits': 10, 'n-0Digits': 12, 'timeOut': 18, 'n-13Digits': 15, 'n-7Digits': 7, 'n-5Digits': 5, 'endOfPulsing': 11, 'n-9Digits': 9, 'n-14Digits': 16, 'n-3Digits': 3, 'n-4Digits': 4, 'n-11Digits': 13, 'n-8Digits': 8, 'n-1Digits': 1, 'n-2Digits': 2, 'n-15Digits': 17, 'n-12Digits': 14.
                 t1NetworkProfileV1_LineInterface_GroupBAnswerSignal 1.3.6.1.4.1.529.23.126.2.1.39 integer read-write
The group B signal to send prior to answering a call. Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfileV1_LineInterface_GroupBBusySignal 1.3.6.1.4.1.529.23.126.2.1.40 integer read-write
The group B signal to send to reject a call. Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfileV1_LineInterface_GroupBNoMatchSignal 1.3.6.1.4.1.529.23.126.2.1.41 integer read-write
The group B signal to send to reject a call with invalid call number. Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfileV1_LineInterface_GroupBCollectSignal 1.3.6.1.4.1.529.23.126.2.1.42 integer read-write
The group B signal to send to answer/reject a collect call. Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfileV1_LineInterface_GroupIiSignal 1.3.6.1.4.1.529.23.126.2.1.43 integer read-write
The group II signal to send after sending all address digits. Enumeration: 'signalIi13': 13, 'signalIi12': 12, 'signalIi11': 11, 'signalIi10': 10, 'signalIi15': 15, 'signalIi14': 14, 'signalIi3': 3, 'signalIi2': 2, 'signalIi1': 1, 'signalIi7': 7, 'signalIi6': 6, 'signalIi5': 5, 'signalIi4': 4, 'signalIi9': 9, 'signalIi8': 8.
                 t1NetworkProfileV1_LineInterface_InputSampleCount 1.3.6.1.4.1.529.23.126.2.1.44 integer read-write
The number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the more samples, the more acccurate the detection result Enumeration: 'twoSamples': 2, 'oneSample': 1.
                 t1NetworkProfileV1_LineInterface_AnswerDelay 1.3.6.1.4.1.529.23.126.2.1.45 integer read-write
Number of milliseconds to wait before answering an incoming R2 call.
                 t1NetworkProfileV1_LineInterface_CallerId 1.3.6.1.4.1.529.23.126.2.1.46 integer read-write
TRUE if the caller Id is enabled, otherwise FALSE. Enumeration: 'noCallerId': 1, 'getCallerId': 2.
                 t1NetworkProfileV1_LineInterface_LineSignaling 1.3.6.1.4.1.529.23.126.2.1.47 integer read-write
The line signaling of E1 line. Enumeration: 'aBitOnly0EqualBBit': 2, 'aBitOnly1EqualBBit': 3, 'abBitsLineSignaling': 1.
                 t1NetworkProfileV1_LineInterface_Timer1CollectCall 1.3.6.1.4.1.529.23.126.2.1.48 integer read-write
Adjustable between 0 ~ 2000ms
                 t1NetworkProfileV1_LineInterface_Timer2CollectCall 1.3.6.1.4.1.529.23.126.2.1.49 integer read-write
Adjustable between 10 ~ 2000ms
                 t1NetworkProfileV1_LineInterface_SendDiscVal 1.3.6.1.4.1.529.23.126.2.1.50 integer read-write
Number of seconds before sending ISDN disconnect to switch. 0 means disable.
                 t1NetworkProfileV1_LineInterface_HuntGrpPhoneNumber1 1.3.6.1.4.1.529.23.126.2.1.51 displaystring read-write
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
                 t1NetworkProfileV1_LineInterface_HuntGrpPhoneNumber2 1.3.6.1.4.1.529.23.126.2.1.52 displaystring read-write
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
                 t1NetworkProfileV1_LineInterface_HuntGrpPhoneNumber3 1.3.6.1.4.1.529.23.126.2.1.53 displaystring read-write
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
                 t1NetworkProfileV1_LineInterface_PriTypeOfNumber 1.3.6.1.4.1.529.23.126.2.1.54 integer read-write
PRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls.
                 t1NetworkProfileV1_LineInterface_PriNumberingPlanId 1.3.6.1.4.1.529.23.126.2.1.55 integer read-write
PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.
                 t1NetworkProfileV1_LineInterface_SuperFrameSrcLineNumber 1.3.6.1.4.1.529.23.126.2.1.56 integer read-write
The line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchronized to the source line.
                 t1NetworkProfileV1_LineInterface_CollectIncomingDigits 1.3.6.1.4.1.529.23.126.2.1.57 integer read-write
TRUE collect incoming called/calling digits, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfileV1_LineInterface_T1InterDigitTimeout 1.3.6.1.4.1.529.23.126.2.1.58 integer read-write
Inter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines.
                 t1NetworkProfileV1_LineInterface_R1UseAnir 1.3.6.1.4.1.529.23.126.2.1.59 integer read-write
TRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfileV1_LineInterface_R1FirstDigitTimer 1.3.6.1.4.1.529.23.126.2.1.60 integer read-write
The timer between sending KPA and receiving first Digit in R1 signaling in milliseconds.
                 t1NetworkProfileV1_LineInterface_R1AnirDelay 1.3.6.1.4.1.529.23.126.2.1.61 integer read-write
Delay in milliseconds between receiving ST and sending ANIR signal.
                 t1NetworkProfileV1_LineInterface_R1AnirTimer 1.3.6.1.4.1.529.23.126.2.1.62 integer read-write
Time in milliseconds of ANIR signal.
                 t1NetworkProfileV1_LineInterface_R1Modified 1.3.6.1.4.1.529.23.126.2.1.63 integer read-write
Use R1 modified signaling. Default is FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfileV1_LineInterface_FirstDs0 1.3.6.1.4.1.529.23.126.2.1.64 integer read-write
When using fractional T1/E1 the first DS0 used. Default is 1
                 t1NetworkProfileV1_LineInterface_LastDs0 1.3.6.1.4.1.529.23.126.2.1.65 integer read-write
When using fractional T1/E1 the last DS0 used. Default is 24
                 t1NetworkProfileV1_LineInterface_NailedGroup 1.3.6.1.4.1.529.23.126.2.1.66 integer read-write
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
                 t1NetworkProfileV1_LineInterface_Ss7Continuity_IncomingProcedure 1.3.6.1.4.1.529.23.126.2.1.67 integer read-write
Procedure used for incoming continuity check on this line. Enumeration: 'transponder': 3, 'loopback': 2.
                 t1NetworkProfileV1_LineInterface_Ss7Continuity_OutgoingProcedure 1.3.6.1.4.1.529.23.126.2.1.68 integer read-write
Procedure used for outgoing continuity check on this line. Enumeration: 'send2000Expect1780': 6, 'send2010Expect1780': 3, 'singleTone2010': 2, 'singleTone2000': 5, 'send1780Expect2000': 7, 'send1780Expect2010': 4.
                 t1NetworkProfileV1_LineInterface_LineProvision 1.3.6.1.4.1.529.23.126.2.1.69 integer read-write
Line Provision. Enumeration: 'lineProvisionNone': 1, 'lineProvisionH0H11': 4, 'lineProvisionH0H12': 6, 'lineProvisionH0': 2, 'lineProvisionH0H11H12': 8, 'lineProvisionH12': 5, 'lineProvisionH11': 3, 'lineProvisionH11H12': 7.
                 t1NetworkProfileV1_LineInterface_Gr303Mode 1.3.6.1.4.1.529.23.126.2.1.70 integer read-write
GR-303 Mode. Enumeration: 'gr303Disabled': 1, 'gr3035essPri': 2, 'gr303Normal': 5, 'gr303DmsPri': 3, 'gr303Secondary': 4.
                 t1NetworkProfileV1_LineInterface_Gr303GroupId 1.3.6.1.4.1.529.23.126.2.1.71 integer read-write
For GR303 lines: the interface group id.
                 t1NetworkProfileV1_LineInterface_Gr303Ds1Id 1.3.6.1.4.1.529.23.126.2.1.72 integer read-write
For GR303 lines: The logical DS1 id.
                 t1NetworkProfileV1_LineInterface_SwitchVersion 1.3.6.1.4.1.529.23.126.2.1.73 integer read-write
Switch Version. Enumeration: 'switchVersionDefinityG3v4': 2, 'switchVersionGeneric': 1.
                 t1NetworkProfileV1_LineInterface_GroupBNoChargeSignal 1.3.6.1.4.1.529.23.126.2.1.74 integer read-write
The group B signal to send if subscriber line is idle / no charge Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfileV1_LineInterface_StatusChangeTrapEnable 1.3.6.1.4.1.529.23.126.2.1.75 integer read-write
When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfileV1_LineInterface_DownTransDelay 1.3.6.1.4.1.529.23.126.2.1.76 integer read-write
To control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equal to .1 seconds of Delay in UP to DOWN transition.
                 t1NetworkProfileV1_LineInterface_UpTransDelay 1.3.6.1.4.1.529.23.126.2.1.77 integer read-write
To control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 seconds of Delay in DOWN to UP transition.
                 t1NetworkProfileV1_LineInterface_NetworkSpecificFacilities 1.3.6.1.4.1.529.23.126.2.1.79 integer read-write
Network Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits of the IE.
                 t1NetworkProfileV1_LineInterface_CauseCodeVerificationEnable 1.3.6.1.4.1.529.23.126.2.1.80 integer read-write
When set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If the switch does not support the cause code, then INVALID ELEM CONTENTS (Cause value 100) will be used for generating PSTN Q931 response. When set to no, the received CAUSE value will be used to generate the PSTN Q931 response. Enumeration: 'yes': 2, 'no': 1.
         mibt1NetworkProfileV1_LineInterface_ChannelConfigTable 1.3.6.1.4.1.529.23.126.3 no-access
A list of mibt1NetworkProfile_v1__line_interface__channel_config profile entries.
             mibt1NetworkProfileV1_LineInterface_ChannelConfigEntry 1.3.6.1.4.1.529.23.126.3.1 no-access
A mibt1NetworkProfile_v1__line_interface__channel_config entry containing objects that maps to the parameters of mibt1NetworkProfile_v1__line_interface__channel_config profile.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_Name 1.3.6.1.4.1.529.23.126.3.1.1 displaystring read-only
                 t1NetworkProfileV1_LineInterface_ChannelConfig_Index_o 1.3.6.1.4.1.529.23.126.3.1.2 integer read-only
                 t1NetworkProfileV1_LineInterface_ChannelConfig_Index1_o 1.3.6.1.4.1.529.23.126.3.1.3 integer read-only
                 t1NetworkProfileV1_LineInterface_ChannelConfig_ChannelUsage 1.3.6.1.4.1.529.23.126.3.1.4 integer read-write
The usage for this specific channel. May be different than the usage for the line, e.g. a nailed channel (clear 64) in a line otherwise used for switched calls. Enumeration: 'nailed64Channel': 3, 'nfasSecondaryDChannel': 6, 'switchedChannel': 2, 'dChannel': 4, 'semiPermChannel': 7, 'nfasPrimaryDChannel': 5, 'ss7SignalingChannel': 8, 'unusedChannel': 1.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_TrunkGroup 1.3.6.1.4.1.529.23.126.3.1.5 integer read-write
The trunk group assigned to this channel.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_PhoneNumber 1.3.6.1.4.1.529.23.126.3.1.6 displaystring read-write
The phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_RoutePort_SlotNumber_SlotNumber 1.3.6.1.4.1.529.23.126.3.1.7 integer read-write
                 t1NetworkProfileV1_LineInterface_ChannelConfig_RoutePort_SlotNumber_ShelfNumber 1.3.6.1.4.1.529.23.126.3.1.8 integer read-write
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_RoutePort_RelativePortNumber_RelativePortNumber 1.3.6.1.4.1.529.23.126.3.1.9 integer read-write
                 t1NetworkProfileV1_LineInterface_ChannelConfig_NailedGroup 1.3.6.1.4.1.529.23.126.3.1.13 integer read-write
A number that identifies the set of channels that makes up a nailed group.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_ChanGroup 1.3.6.1.4.1.529.23.126.3.1.14 integer read-write
A number that identifies the channel-group to which this channel belongs.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_DestChanGroup 1.3.6.1.4.1.529.23.126.3.1.15 integer read-write
A number that identifies the channel-group to which any incoming calls on this channel will be directed.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_DialPlanNumber 1.3.6.1.4.1.529.23.126.3.1.16 integer read-write
A number that identifies the dial plan from the dial plan menu.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_NumberOfDialPlanSelectDigits 1.3.6.1.4.1.529.23.126.3.1.17 integer read-write
The number of leading digits in the incoming phone number to use for selecting the Dial Plan.
                 t1NetworkProfileV1_LineInterface_ChannelConfig_IdlePattern 1.3.6.1.4.1.529.23.126.3.1.18 integer read-write
The idle pattern is the data pattern sent on a channel when it is idle. The idle pattern can be any value from 0(0x00) to 255(0xff)
 mibt1NetworkProfile 1.3.6.1.4.1.529.23.127
         mibt1NetworkProfileTable 1.3.6.1.4.1.529.23.127.1 no-access
A list of mibt1NetworkProfile profile entries.
             mibt1NetworkProfileEntry 1.3.6.1.4.1.529.23.127.1.1 no-access
A mibt1NetworkProfile entry containing objects that maps to the parameters of mibt1NetworkProfile profile.
                 t1NetworkProfile_Shelf_o 1.3.6.1.4.1.529.23.127.1.1.1 integer read-only
                 t1NetworkProfile_Slot_o 1.3.6.1.4.1.529.23.127.1.1.2 integer read-only
                 t1NetworkProfile_Item_o 1.3.6.1.4.1.529.23.127.1.1.3 integer read-only
                 t1NetworkProfile_Name 1.3.6.1.4.1.529.23.127.1.1.4 displaystring read-write
Name of DS1 line.
                 t1NetworkProfile_PhysicalAddress_Shelf 1.3.6.1.4.1.529.23.127.1.1.5 integer read-write
The number of the shelf that the addressed physical device resides on. Enumeration: 'anyShelf': 1, 'shelf2': 3, 'shelf3': 4, 'shelf1': 2, 'shelf6': 7, 'shelf7': 8, 'shelf4': 5, 'shelf5': 6, 'shelf8': 9, 'shelf9': 10.
                 t1NetworkProfile_PhysicalAddress_Slot 1.3.6.1.4.1.529.23.127.1.1.6 integer read-write
The number of the slot that the addressed physical device resides on. Enumeration: 'aLim': 55, 'bLim': 56, 'trunkModule2': 46, 'slot36': 37, 'firstControlModule': 53, 'trunkModule1': 45, 'rightController': 50, 'slot28': 29, 'slot29': 30, 'slot24': 25, 'slot25': 26, 'slot26': 27, 'slot27': 28, 'slot20': 21, 'slot21': 22, 'slot22': 23, 'slot23': 24, 'slotPrimary': 59, 'cLim': 57, 'slot40': 41, 'secondControlModule': 54, 'leftController': 49, 'slot39': 40, 'controlModule': 51, 'slot9': 10, 'slot8': 9, 'controller': 42, 'slot38': 39, 'slot1': 2, 'slot3': 4, 'slot2': 3, 'slot5': 6, 'slot4': 5, 'slot7': 8, 'slot6': 7, 'slot11': 12, 'slot10': 11, 'slot13': 14, 'slot12': 13, 'slot15': 16, 'slot14': 15, 'slot17': 18, 'slot16': 17, 'slot19': 20, 'slot18': 19, 'slot31': 32, 'slot30': 31, 'slot37': 38, 'anySlot': 1, 'slot35': 36, 'slot34': 35, 'slot33': 34, 'dLim': 58, 'slot32': 33.
                 t1NetworkProfile_PhysicalAddress_ItemNumber 1.3.6.1.4.1.529.23.127.1.1.7 integer read-write
A number that specifies an addressable entity within the context of shelf and slot.
                 t1NetworkProfile_LineInterface_Enabled 1.3.6.1.4.1.529.23.127.1.1.8 integer read-write
TRUE if the line is enabled, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfile_LineInterface_TOnlineType 1.3.6.1.4.1.529.23.127.1.1.9 integer read-write
The tonline type of an e1 line. Enumeration: 'none': 1, 'te': 3, 'nt': 2, 'numberOfTonline': 4.
                 t1NetworkProfile_LineInterface_FrameType 1.3.6.1.4.1.529.23.127.1.1.10 integer read-write
The super-framing mode that is used on the physical link(s). Enumeration: 'esf': 2, 'd4': 1, 'g703': 3, 'n-2ds': 4.
                 t1NetworkProfile_LineInterface_Encoding 1.3.6.1.4.1.529.23.127.1.1.11 integer read-write
The layer 1 line encoding used for the physical link(s). Enumeration: 'ami': 1, 'none': 4, 'hdb3': 3, 'b8zs': 2.
                 t1NetworkProfile_LineInterface_ClockSource 1.3.6.1.4.1.529.23.127.1.1.12 integer read-write
Enumeration: 'notEligible': 2, 'eligible': 1.
                 t1NetworkProfile_LineInterface_ClockPriority 1.3.6.1.4.1.529.23.127.1.1.13 integer read-write
Clock priority assigned to the T1 line. Used to select particular lines as clock source. Enumeration: 'highPriority': 2, 'lowPriority': 4, 'middlePriority': 3.
                 t1NetworkProfile_LineInterface_SignalingMode 1.3.6.1.4.1.529.23.127.1.1.14 integer read-write
Inband, ISDN, ISDN_NFAS, PBX or SS7 signaling. Enumeration: 'e1MalaysiaSignaling': 19, 'h248DataTrunk': 34, 'e1PhilippineSignaling': 15, 'e1KoreanSignaling': 6, 'e1ThailandSignaling': 22, 'isdn': 2, 'inbandFgdInFgcOut': 29, 'inbandFgcInFgcOut': 30, 'e1ArgentinaSignaling': 13, 'inbandFgdInFgdOut': 28, 'e1DpnssSignaling': 11, 'e1NewZealandSignaling': 20, 'e1BrazilSignaling': 14, 'e1VietnamSignaling': 32, 'tunneledPriSignaling': 27, 'isdnNfas': 3, 'e1MexicoSignaling': 24, 'inband': 1, 'e1P7Signaling': 7, 'ss7SigTrunk': 33, 'e1CzechSignaling': 17, 'e1ChineseSignaling': 8, 'dtmfR2Signaling': 25, 'e1KuwaitSignaling': 23, 'e1R2Signaling': 5, 'e1NoSignaling': 10, 'e1IsraelSignaling': 21, 'e1MeteredSignaling': 9, 'inbandFgcInFgdOut': 31, 'e1IndianSignaling': 16.
                 t1NetworkProfile_LineInterface_IsdnEmulationSide 1.3.6.1.4.1.529.23.127.1.1.15 integer read-write
Side the line will emulate: TE (user), or NT (network). Enumeration: 'te': 1, 'nt': 2.
                 t1NetworkProfile_LineInterface_RobbedBitMode 1.3.6.1.4.1.529.23.127.1.1.16 integer read-write
Wink start, idle start, incoming wink. Enumeration: 'incW400': 4, 'loopStart': 5, 'incW200': 3, 'idleStart': 2, 'groundStart': 6, 'winkStart': 1.
                 t1NetworkProfile_LineInterface_DefaultCallType 1.3.6.1.4.1.529.23.127.1.1.17 integer read-write
Specify the default call-type for incoming calls, for purposes of call routing and signalling. Enumeration: 'dnisOrDigital': 4, 'dnisOrVoip': 6, 'dnisOrVoice': 3, 'digital': 1, 'voice': 2, 'voip': 5.
                 t1NetworkProfile_LineInterface_SwitchType 1.3.6.1.4.1.529.23.127.1.1.18 integer read-write
The network switch type, needed for ISDN/NFAS signaling. Enumeration: 'btnr191Bri': 20, 'belgianBri': 24, 'islxDpnss': 12, 'mercuryDpnss': 13, 'switchCas': 29, 'taiwanPri': 31, 'german1tr6Bri': 27, 'globandPri': 3, 'japanPri': 4, 'unknownBri': 15, 'idslPtpBri': 30, 'btSs7': 32, 'ntiPri': 2, 'vn2Bri': 19, 'kddBri': 23, 'att5essBri': 16, 'isdxDpnss': 11, 'ptpNet3Bri': 22, 'vn3Pri': 5, 'dms100Nt1Bri': 17, 'danishPri': 8, 'dass2': 14, 'attPri': 1, 'swissBri': 26, 'net5Pri': 7, 'natIsdn2Pri': 10, 'australBri': 25, 'nisdn1Bri': 18, 'australPri': 9, 'onetr6Pri': 6, 'dutch1tr6Bri': 28, 'net3Bri': 21.
                 t1NetworkProfile_LineInterface_NfasGroupId 1.3.6.1.4.1.529.23.127.1.1.19 integer read-write
For NFAS lines: the nfas group id. Not used with robbed bit signaling.
                 t1NetworkProfile_LineInterface_NfasId 1.3.6.1.4.1.529.23.127.1.1.20 integer read-write
For NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit signaling.
                 t1NetworkProfile_LineInterface_IncomingCallHandling 1.3.6.1.4.1.529.23.127.1.1.21 integer read-write
This parameter is used to determine the type of processing required for incoming calls from this line. Enumeration: 'ss7GatewayProcessing': 3, 'rejectAll': 1, 'internalProcessing': 2.
                 t1NetworkProfile_LineInterface_DeleteDigits 1.3.6.1.4.1.529.23.127.1.1.22 integer read-write
Number of digits to delete from numbers received from a PBX.
                 t1NetworkProfile_LineInterface_AddDigitString 1.3.6.1.4.1.529.23.127.1.1.23 displaystring read-write
String of digits to prepend to phone number received from PBX.
                 t1NetworkProfile_LineInterface_CallByCall 1.3.6.1.4.1.529.23.127.1.1.24 integer read-write
Call-by-call value to set when routing calls from PBX to network.
                 t1NetworkProfile_LineInterface_PbxAnswerNumber 1.3.6.1.4.1.529.23.127.1.1.25 displaystring read-write
The answer number that is the equivalent of a port answer-number used for the network to pbx routing.
                 t1NetworkProfile_LineInterface_AnswerService 1.3.6.1.4.1.529.23.127.1.1.26 integer read-write
The switched service type (or none) that is used for routing network calls to the pbx. Enumeration: 'modem': 43, 'n-1024Clear': 24, 'x30RestrictedBearer': 39, 'n-2456krV110': 51, 'n-64kClear': 3, 'n-14464krV110': 80, 'v32': 66, 'n-1600Clear': 32, 'n-38456krV110': 55, 'n-64kX30Restricted': 41, 'n-1280Clear': 28, 'n-1856Clear': 36, 'n-28864krV110': 81, 'n-19264kV110': 59, 'n-896Clear': 22, 'n-192kClear': 11, 'n-9656krV110': 53, 'n-512Clear': 16, 'n-144kClear': 255, 'n-576Clear': 17, 'n-448Clear': 15, 'n-960Clear': 23, 'n-2464kV110': 56, 'n-4856kV110': 47, 'n-4856krV110': 52, 'n-14456kV110': 74, 'frameRelaySvc': 71, 'n-9664krV110': 63, 'iptoip': 263, 'n-19256krV110': 54, 'v110ClearBearer': 40, 'n-56kRestricted': 2, 'n-704Clear': 19, 'n-1088Clear': 25, 'n-1344Clear': 29, 'wormarq': 73, 'n-14464kV110': 78, 'atmodem': 44, 'n-9656kV110': 48, 'vpnTunnel': 72, 'n-28856krV110': 77, 'n-19264krV110': 64, 'n-38464kV110': 60, 'n-1472Clear': 31, 'atmSvc': 70, 'n-9664kV110': 58, 'n-4864krV110': 62, 'n-38456kV110': 50, 'n-14456krV110': 76, 'n-1536kClear': 8, 'n-1216Clear': 27, 'n-28856kV110': 75, 'n-2464krV110': 61, 'n-384kRestricted': 6, 'n-1792Clear': 35, 'n-56kClear': 5, 'n-320kClear': 13, 'n-19256kV110': 49, 'n-768Clear': 20, 'dws384Clear': 14, 'n-2456kV110': 46, 'voice': 1, 'n-1536kRestricted': 9, 'n-64kRestricted': 4, 'n-128kClear': 10, 'n-4864kV110': 57, 'n-384kClear': 7, 'n-1920Clear': 37, 'phs64k': 67, 'n-1728Clear': 34, 'n-1152Clear': 26, 'n-1664Clear': 33, 'n-56kV110Clear': 42, 'n-1408Clear': 30, 'n-256kClear': 12, 'voiceOverIp': 68, 'n-28864kV110': 79, 'n-832Clear': 21, 'n-640Clear': 18, 'modem31khzAudio': 82, 'n-38464krV110': 65, 'x25Svc': 83.
                 t1NetworkProfile_LineInterface_oPBXType 1.3.6.1.4.1.529.23.127.1.1.27 integer read-write
The PBX Class as defined in the enumeration above. Enumeration: 'hostPbxLeasedData': 3, 'hostPbxLeased11': 4, 'hostPbxVoice': 1, 'hostPbxData': 2.
                 t1NetworkProfile_LineInterface_DataSense 1.3.6.1.4.1.529.23.127.1.1.28 integer read-write
D-channel normal or inverted data. Currently unused (normal data is always selected. Enumeration: 'inv': 2, 'normal': 1.
                 t1NetworkProfile_LineInterface_IdleMode 1.3.6.1.4.1.529.23.127.1.1.29 integer read-write
D-channel mark or flag idle. Currently unused (flag idle is always selected. Enumeration: 'flagIdle': 2, 'markIdle': 1.
                 t1NetworkProfile_LineInterface_oFDL 1.3.6.1.4.1.529.23.127.1.1.30 integer read-write
Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise. Enumeration: 'atNT': 2, 'none': 1, 'sprint': 4, 'ansi': 3.
                 t1NetworkProfile_LineInterface_FrontEndType 1.3.6.1.4.1.529.23.127.1.1.31 integer read-write
The front end type (CSU/DSX) of the T1 transceiver. Enumeration: 'cs': 1, 'dsx': 2.
                 t1NetworkProfile_LineInterface_oDSXLineLength 1.3.6.1.4.1.529.23.127.1.1.32 integer read-write
The length of the physical T1 line (for DSX lines). Enumeration: 'n-400533': 4, 'n-1133': 1, 'n-534655': 5, 'n-267399': 3, 'n-134266': 2.
                 t1NetworkProfile_LineInterface_oCSUBuildOut 1.3.6.1.4.1.529.23.127.1.1.33 integer read-write
Line buildout value for CSU lines. Enumeration: 'n-2255Db': 4, 'n-15Db': 3, 'n-75Db': 2, 'n-0Db': 1.
                 t1NetworkProfile_LineInterface_OverlapReceiving 1.3.6.1.4.1.529.23.127.1.1.34 integer read-write
TRUE if overlap receiving procedure may be used to handle incoming call, FALSE if not Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfile_LineInterface_PriPrefixNumber 1.3.6.1.4.1.529.23.127.1.1.35 displaystring read-write
The unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits when overlap receiving procedure is used to handle the incoming call. Defaults to '' to not count the trailing digits.
                 t1NetworkProfile_LineInterface_TrailingDigits 1.3.6.1.4.1.529.23.127.1.1.36 integer read-write
Number of trailing digits expected from the called party number information elements of INFORMATION messages when overlap receiving procedure is used to handle the incoming call. SETUP message may contain some trailing digits in the called party number information element. Defaults to 2.
                 t1NetworkProfile_LineInterface_T302Timer 1.3.6.1.4.1.529.23.127.1.1.37 integer read-write
Number of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving procedure. Defaults to 10000.
                 t1NetworkProfile_LineInterface_Layer3End 1.3.6.1.4.1.529.23.127.1.1.38 integer read-write
If x-side, layer 3 favors outgoing call when a call collision occurs. Enumeration: 'true': 2, 'false': 1.
                 t1NetworkProfile_LineInterface_Layer2End 1.3.6.1.4.1.529.23.127.1.1.39 integer read-write
This parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, and the other side acts as a PBX. If a-side, layer 2 acts as ET. Enumeration: 'true': 2, 'false': 1.
                 t1NetworkProfile_LineInterface_NlValue 1.3.6.1.4.1.529.23.127.1.1.40 integer read-write
Number of re-transmissions; default to 64.
                 t1NetworkProfile_LineInterface_LoopAvoidance 1.3.6.1.4.1.529.23.127.1.1.41 integer read-write
Loop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7).
                 t1NetworkProfile_LineInterface_MaintenanceState 1.3.6.1.4.1.529.23.127.1.1.42 integer read-write
TRUE if the line is in user-requested maintenance mode, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfile_LineInterface_NumberComplete 1.3.6.1.4.1.529.23.127.1.1.43 integer read-write
The criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, 14, or 15 digits received, or the end-of-pulsing signal received, or time-out. Enumeration: 'n-6Digits': 6, 'n-10Digits': 10, 'n-0Digits': 12, 'timeOut': 18, 'n-13Digits': 15, 'n-7Digits': 7, 'n-5Digits': 5, 'endOfPulsing': 11, 'n-9Digits': 9, 'n-14Digits': 16, 'n-3Digits': 3, 'n-4Digits': 4, 'n-11Digits': 13, 'n-8Digits': 8, 'n-1Digits': 1, 'n-2Digits': 2, 'n-15Digits': 17, 'n-12Digits': 14.
                 t1NetworkProfile_LineInterface_GroupBAnswerSignal 1.3.6.1.4.1.529.23.127.1.1.44 integer read-write
The group B signal to send prior to answering a call. Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfile_LineInterface_GroupBBusySignal 1.3.6.1.4.1.529.23.127.1.1.45 integer read-write
The group B signal to send to reject a call. Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfile_LineInterface_GroupBNoMatchSignal 1.3.6.1.4.1.529.23.127.1.1.46 integer read-write
The group B signal to send to reject a call with invalid call number. Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfile_LineInterface_GroupBCollectSignal 1.3.6.1.4.1.529.23.127.1.1.47 integer read-write
The group B signal to send to answer/reject a collect call. Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfile_LineInterface_GroupIiSignal 1.3.6.1.4.1.529.23.127.1.1.48 integer read-write
The group II signal to send after sending all address digits. Enumeration: 'signalIi13': 13, 'signalIi12': 12, 'signalIi11': 11, 'signalIi10': 10, 'signalIi15': 15, 'signalIi14': 14, 'signalIi3': 3, 'signalIi2': 2, 'signalIi1': 1, 'signalIi7': 7, 'signalIi6': 6, 'signalIi5': 5, 'signalIi4': 4, 'signalIi9': 9, 'signalIi8': 8.
                 t1NetworkProfile_LineInterface_InputSampleCount 1.3.6.1.4.1.529.23.127.1.1.49 integer read-write
The number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the more samples, the more acccurate the detection result Enumeration: 'twoSamples': 2, 'oneSample': 1.
                 t1NetworkProfile_LineInterface_AnswerDelay 1.3.6.1.4.1.529.23.127.1.1.50 integer read-write
Number of milliseconds to wait before answering an incoming R2 call.
                 t1NetworkProfile_LineInterface_CallerId 1.3.6.1.4.1.529.23.127.1.1.51 integer read-write
TRUE if the caller Id is enabled, otherwise FALSE. Enumeration: 'noCallerId': 1, 'getCallerId': 2.
                 t1NetworkProfile_LineInterface_LineSignaling 1.3.6.1.4.1.529.23.127.1.1.52 integer read-write
The line signaling of E1 line. Enumeration: 'aBitOnly0EqualBBit': 2, 'aBitOnly1EqualBBit': 3, 'abBitsLineSignaling': 1.
                 t1NetworkProfile_LineInterface_Timer1CollectCall 1.3.6.1.4.1.529.23.127.1.1.53 integer read-write
Adjustable between 0 ~ 2000ms
                 t1NetworkProfile_LineInterface_Timer2CollectCall 1.3.6.1.4.1.529.23.127.1.1.54 integer read-write
Adjustable between 10 ~ 2000ms
                 t1NetworkProfile_LineInterface_SendDiscVal 1.3.6.1.4.1.529.23.127.1.1.55 integer read-write
Number of seconds before sending ISDN disconnect to switch. 0 means disable.
                 t1NetworkProfile_LineInterface_HuntGrpPhoneNumber1 1.3.6.1.4.1.529.23.127.1.1.56 displaystring read-write
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
                 t1NetworkProfile_LineInterface_HuntGrpPhoneNumber2 1.3.6.1.4.1.529.23.127.1.1.57 displaystring read-write
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
                 t1NetworkProfile_LineInterface_HuntGrpPhoneNumber3 1.3.6.1.4.1.529.23.127.1.1.58 displaystring read-write
The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP.
                 t1NetworkProfile_LineInterface_PriTypeOfNumber 1.3.6.1.4.1.529.23.127.1.1.59 integer read-write
PRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls.
                 t1NetworkProfile_LineInterface_PriNumberingPlanId 1.3.6.1.4.1.529.23.127.1.1.60 integer read-write
PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls.
                 t1NetworkProfile_LineInterface_SuperFrameSrcLineNumber 1.3.6.1.4.1.529.23.127.1.1.61 integer read-write
The line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchronized to the source line.
                 t1NetworkProfile_LineInterface_CollectIncomingDigits 1.3.6.1.4.1.529.23.127.1.1.62 integer read-write
TRUE collect incoming called/calling digits, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfile_LineInterface_T1InterDigitTimeout 1.3.6.1.4.1.529.23.127.1.1.63 integer read-write
Inter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines.
                 t1NetworkProfile_LineInterface_R1UseAnir 1.3.6.1.4.1.529.23.127.1.1.64 integer read-write
TRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfile_LineInterface_R1FirstDigitTimer 1.3.6.1.4.1.529.23.127.1.1.65 integer read-write
The timer between sending KPA and receiving first Digit in R1 signaling in milliseconds.
                 t1NetworkProfile_LineInterface_R1AnirDelay 1.3.6.1.4.1.529.23.127.1.1.66 integer read-write
Delay in milliseconds between receiving ST and sending ANIR signal.
                 t1NetworkProfile_LineInterface_R1AnirTimer 1.3.6.1.4.1.529.23.127.1.1.67 integer read-write
Time in milliseconds of ANIR signal.
                 t1NetworkProfile_LineInterface_R1Modified 1.3.6.1.4.1.529.23.127.1.1.68 integer read-write
Use R1 modified signaling. Default is FALSE. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfile_LineInterface_FirstDs0 1.3.6.1.4.1.529.23.127.1.1.69 integer read-write
When using fractional T1/E1 the first DS0 used. Default is 1
                 t1NetworkProfile_LineInterface_LastDs0 1.3.6.1.4.1.529.23.127.1.1.70 integer read-write
When using fractional T1/E1 the last DS0 used. Default is 24
                 t1NetworkProfile_LineInterface_NailedGroup 1.3.6.1.4.1.529.23.127.1.1.71 integer read-write
A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.
                 t1NetworkProfile_LineInterface_Ss7Continuity_IncomingProcedure 1.3.6.1.4.1.529.23.127.1.1.72 integer read-write
Procedure used for incoming continuity check on this line. Enumeration: 'transponder': 3, 'loopback': 2.
                 t1NetworkProfile_LineInterface_Ss7Continuity_OutgoingProcedure 1.3.6.1.4.1.529.23.127.1.1.73 integer read-write
Procedure used for outgoing continuity check on this line. Enumeration: 'send2000Expect1780': 6, 'send2010Expect1780': 3, 'singleTone2010': 2, 'singleTone2000': 5, 'send1780Expect2000': 7, 'send1780Expect2010': 4.
                 t1NetworkProfile_LineInterface_LineProvision 1.3.6.1.4.1.529.23.127.1.1.74 integer read-write
Line Provision. Enumeration: 'lineProvisionNone': 1, 'lineProvisionH0H11': 4, 'lineProvisionH0H12': 6, 'lineProvisionH0': 2, 'lineProvisionH0H11H12': 8, 'lineProvisionH12': 5, 'lineProvisionH11': 3, 'lineProvisionH11H12': 7.
                 t1NetworkProfile_LineInterface_Gr303Mode 1.3.6.1.4.1.529.23.127.1.1.75 integer read-write
GR-303 Mode. Enumeration: 'gr303Disabled': 1, 'gr3035essPri': 2, 'gr303Normal': 5, 'gr303DmsPri': 3, 'gr303Secondary': 4.
                 t1NetworkProfile_LineInterface_Gr303GroupId 1.3.6.1.4.1.529.23.127.1.1.76 integer read-write
For GR303 lines: the interface group id.
                 t1NetworkProfile_LineInterface_Gr303Ds1Id 1.3.6.1.4.1.529.23.127.1.1.77 integer read-write
For GR303 lines: The logical DS1 id.
                 t1NetworkProfile_LineInterface_SwitchVersion 1.3.6.1.4.1.529.23.127.1.1.78 integer read-write
Switch Version. Enumeration: 'switchVersionDefinityG3v4': 2, 'switchVersionGeneric': 1.
                 t1NetworkProfile_BackToBack 1.3.6.1.4.1.529.23.127.1.1.79 integer read-write
Indicates whether the Multiband is connected back-to-back to another Muliband, rather than a DPNSS PBX. If this field is TRUE, than we don't need to disable receiving interrupts when too many are coming in beyond our processing power. NOTE: GPT's iSDX keeps re-transmitting a frame at 8 ms intervals until it receives an acknowledgement. Enumeration: 'true': 2, 'false': 1.
                 t1NetworkProfile_ChannelUsage 1.3.6.1.4.1.529.23.127.1.1.80 integer read-write
This is the use of the first T1 interface. Enumeration: 'dropAndInsert': 4, 'dualNetworkInterface': 5, 'tOnlineZgrInterface': 7, 't1LineQuiesce': 3, 'tOnlineUsrInterface': 6, 'lineUnavailable': 1, 'lineDisable': 2.
                 t1NetworkProfile_Action_o 1.3.6.1.4.1.529.23.127.1.1.81 integer read-write
Enumeration: 'deleteProfile': 3, 'createProfile': 2, 'noAction': 1.
                 t1NetworkProfile_LineInterface_GroupBNoChargeSignal 1.3.6.1.4.1.529.23.127.1.1.82 integer read-write
The group B signal to send if subscriber line is idle / no charge Enumeration: 'signalB8': 8, 'signalB9': 9, 'signalB2': 2, 'signalB3': 3, 'signalB1': 1, 'signalB6': 6, 'signalB7': 7, 'signalB4': 4, 'signalB5': 5, 'signalB10': 10, 'signalB11': 11, 'signalB12': 12, 'signalB13': 13, 'signalB14': 14, 'signalB15': 15.
                 t1NetworkProfile_LineInterface_StatusChangeTrapEnable 1.3.6.1.4.1.529.23.127.1.1.83 integer read-write
When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status change, i.e., ds3, then no trap for the ds1 are sent. The default setting is No. Enumeration: 'yes': 2, 'no': 1.
                 t1NetworkProfile_LineInterface_DownTransDelay 1.3.6.1.4.1.529.23.127.1.1.84 integer read-write
To control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equal to .1 seconds of Delay in UP to DOWN transition.
                 t1NetworkProfile_LineInterface_UpTransDelay 1.3.6.1.4.1.529.23.127.1.1.85 integer read-write
To control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 seconds of Delay in DOWN to UP transition.
                 t1NetworkProfile_LineInterface_NetworkSpecificFacilities 1.3.6.1.4.1.529.23.127.1.1.87 integer read-write
Network Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits of the IE.
                 t1NetworkProfile_LineInterface_CauseCodeVerificationEnable 1.3.6.1.4.1.529.23.127.1.1.88 integer read-write
When set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If the switch does not support the cause code, then INVALID ELEM CONTENTS (Cause value 100) will be used for generating PSTN Q931 response. When set to no, the received CAUSE value will be used to generate the PSTN Q931 response. Enumeration: 'yes': 2, 'no': 1.
         mibt1NetworkProfile_LineInterface_ChannelConfigTable 1.3.6.1.4.1.529.23.127.2 no-access
A list of mibt1NetworkProfile__line_interface__channel_config profile entries.
             mibt1NetworkProfile_LineInterface_ChannelConfigEntry 1.3.6.1.4.1.529.23.127.2.1 no-access
A mibt1NetworkProfile__line_interface__channel_config entry containing objects that maps to the parameters of mibt1NetworkProfile__line_interface__channel_config profile.
                 t1NetworkProfile_LineInterface_ChannelConfig_Shelf_o 1.3.6.1.4.1.529.23.127.2.1.1 integer read-only
                 t1NetworkProfile_LineInterface_ChannelConfig_Slot_o 1.3.6.1.4.1.529.23.127.2.1.2 integer read-only
                 t1NetworkProfile_LineInterface_ChannelConfig_Item_o 1.3.6.1.4.1.529.23.127.2.1.3 integer read-only
                 t1NetworkProfile_LineInterface_ChannelConfig_Index_o 1.3.6.1.4.1.529.23.127.2.1.4 integer read-only
                 t1NetworkProfile_LineInterface_ChannelConfig_ChannelUsage 1.3.6.1.4.1.529.23.127.2.1.5 integer read-write
The usage for this specific channel. May be different than the usage for the line, e.g. a nailed channel (clear 64) in a line otherwise used for switched calls. Enumeration: 'nailed64Channel': 3, 'nfasSecondaryDChannel': 6, 'switchedChannel': 2, 'dChannel': 4, 'semiPermChannel': 7, 'nfasPrimaryDChannel': 5, 'ss7SignalingChannel': 8, 'unusedChannel': 1.
                 t1NetworkProfile_LineInterface_ChannelConfig_TrunkGroup 1.3.6.1.4.1.529.23.127.2.1.6 integer read-write
The trunk group assigned to this channel.
                 t1NetworkProfile_LineInterface_ChannelConfig_PhoneNumber 1.3.6.1.4.1.529.23.127.2.1.7 displaystring read-write
The phone number of this channel. This is the number sent to the far end in an inverse multiplexed call when instructing the far end to add more bandwidth. The number should contain the minimum number of digits to identify the channel. If the channel is part of a hunt group, the phone number should be blank.
                 t1NetworkProfile_LineInterface_ChannelConfig_RoutePort_SlotNumber_SlotNumber 1.3.6.1.4.1.529.23.127.2.1.8 integer read-write
                 t1NetworkProfile_LineInterface_ChannelConfig_RoutePort_SlotNumber_ShelfNumber 1.3.6.1.4.1.529.23.127.2.1.9 integer read-write
TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.
                 t1NetworkProfile_LineInterface_ChannelConfig_RoutePort_RelativePortNumber_RelativePortNumber 1.3.6.1.4.1.529.23.127.2.1.10 integer read-write
                 t1NetworkProfile_LineInterface_ChannelConfig_NailedGroup 1.3.6.1.4.1.529.23.127.2.1.14 integer read-write
A number that identifies the set of channels that makes up a nailed group.
                 t1NetworkProfile_LineInterface_ChannelConfig_ChanGroup 1.3.6.1.4.1.529.23.127.2.1.15 integer read-write
A number that identifies the channel-group to which this channel belongs.
                 t1NetworkProfile_LineInterface_ChannelConfig_DestChanGroup 1.3.6.1.4.1.529.23.127.2.1.16 integer read-write
A number that identifies the channel-group to which any incoming calls on this channel will be directed.
                 t1NetworkProfile_LineInterface_ChannelConfig_DialPlanNumber 1.3.6.1.4.1.529.23.127.2.1.17 integer read-write
A number that identifies the dial plan from the dial plan menu.
                 t1NetworkProfile_LineInterface_ChannelConfig_NumberOfDialPlanSelectDigits 1.3.6.1.4.1.529.23.127.2.1.18 integer read-write
The number of leading digits in the incoming phone number to use for selecting the Dial Plan.
                 t1NetworkProfile_LineInterface_ChannelConfig_IdlePattern 1.3.6.1.4.1.529.23.127.2.1.19 integer read-write
The idle pattern is the data pattern sent on a channel when it is idle. The idle pattern can be any value from 0(0x00) to 255(0xff)