ASCEND-MIBSDSLNET-MIB: View SNMP OID List / Download MIB

A list of mibsdslNetworkProfile profile entries.

A mibsdslNetworkProfile entry containing objects that maps to the parameters of mibsdslNetworkProfile profile.

For future use. The current design does not use the name field but instead references Sdsl lines by the physical address; we may in the future support referencing Sdsl lines by name as well as by address. The name consists of a null terminated ascii string supplied by the user; it defaults to the ascii form of the Sdsl line physical address.

The number of the shelf that the addressed physical device resides on. Enumeration: 'anyShelf': 1, 'shelf2': 3, 'shelf3': 4, 'shelf1': 2, 'shelf6': 7, 'shelf7': 8, 'shelf4': 5, 'shelf5': 6, 'shelf8': 9, 'shelf9': 10.

The number of the slot that the addressed physical device resides on. Enumeration: 'aLim': 55, 'bLim': 56, 'trunkModule2': 46, 'slot36': 37, 'firstControlModule': 53, 'trunkModule1': 45, 'rightController': 50, 'slot28': 29, 'slot29': 30, 'slot24': 25, 'slot25': 26, 'slot26': 27, 'slot27': 28, 'slot20': 21, 'slot21': 22, 'slot22': 23, 'slot23': 24, 'slotPrimary': 59, 'cLim': 57, 'slot40': 41, 'secondControlModule': 54, 'leftController': 49, 'slot39': 40, 'controlModule': 51, 'slot9': 10, 'slot8': 9, 'controller': 42, 'slot38': 39, 'slot1': 2, 'slot3': 4, 'slot2': 3, 'slot5': 6, 'slot4': 5, 'slot7': 8, 'slot6': 7, 'slot11': 12, 'slot10': 11, 'slot13': 14, 'slot12': 13, 'slot15': 16, 'slot14': 15, 'slot17': 18, 'slot16': 17, 'slot19': 20, 'slot18': 19, 'slot31': 32, 'slot30': 31, 'slot37': 38, 'anySlot': 1, 'slot35': 36, 'slot34': 35, 'slot33': 34, 'dLim': 58, 'slot32': 33.

A number that specifies an addressable entity within the context of shelf and slot.

TRUE if the line is enabled, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.

For potential backwards compatibility. The current design consists of one line profile numbered 0.

The trunk group to which this line is assigned. 0 means this line is not part of a trunk group.

A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group.

TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as it will almost always be needed when a slot number is needed.

Line activation mode. Enumeration: 'dsrActive': 2, 'dcdDsrActive': 3, 'static': 1.

The data rate mode defines the mode for modem training. This parameter does not pertain to the old 16 port sdsl card. Enumeration: 'autobaud': 2, 'singlebaud': 3, 'fastautobaud': 4.

The symetrical interface rate. This parameter does not pertain to the old 16 port sdsl card. Enumeration: 'n-1168000': 6, 'n-1552000': 7, 'n-528000': 4, 'n-272000': 2, 'n-1152000': 16, 'n-192000': 10, 'n-768000': 14, 'n-2320000': 8, 'n-400000': 3, 'n-144000': 1, 'n-784000': 5, 'n-160000': 9, 'n-1536000': 17, 'n-1920000': 20, 'n-208000': 11, 'n-384000': 12, 'n-1040000': 15, 'n-416000': 13, 'n-1568000': 18, 'n-2160000': 21, 'n-1680000': 19.

The Unit Type defines if a line is acting as either a Central Office (COE) or Customer Premise Equipment (CPE). Note that the remote unit needs to be configured opposite to this configureation. This parameter does not pertain to the old 16 port sdsl card. Enumeration: 'coe': 1, 'cpe': 2.

Enumeration: 'deleteProfile': 3, 'createProfile': 2, 'noAction': 1.

TRUE if the line is enabled, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.

When the Rate Mode is set to auto. This parameter defines the base rate that the auto rate mechanism uses to start its initial training with. Enumeration: 'n-1168000': 6, 'n-1552000': 7, 'n-528000': 4, 'n-272000': 2, 'n-1152000': 16, 'n-192000': 10, 'n-768000': 14, 'n-2320000': 8, 'n-400000': 3, 'n-144000': 1, 'n-784000': 5, 'n-160000': 9, 'n-1536000': 17, 'n-1920000': 20, 'n-208000': 11, 'n-384000': 12, 'n-1040000': 15, 'n-416000': 13, 'n-1568000': 18, 'n-2160000': 21, 'n-1680000': 19.

If this value is set to Inverted, the Tx data will be inverted and the Rx data will be expected to be inverted. Otherwise the Tx and Rx data will be non-inverted. Enumeration: 'inv': 2, 'normal': 1.

The Vpi to be used for the VP switching. Rest of the valid VPIs in valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.

The static address to be assigned to dhcp client.

A number representing maximum number lease requests that would be granted.

If this value is set to Mag bit 1st, the sdsl-data-format outputs the magnitude before the sign bit. Otherwise with value set to sign bit 1st, the sdsl-data-format outputs the sign before the magnitude bit. This is our default. Enumeration: 'serial': 1.

Port sparing operational mode for this port. Enumeration: 'automatic': 3, 'inactive': 1, 'manual': 2.

This line can be configured to run in ATM or HDLC serial mode. Enumeration: 'atm': 1, 'hdlc': 2.

Configuration of different modem loopbacks. Enumeration: 'none': 1, 'analog': 2, 'digital': 3.

Ignore line up value for this port. Enumeration: 'yes': 3, 'no': 2, 'systemDefined': 1.