ASCEND-MIBETHER-MIB: View SNMP OID List / Download MIB

VENDOR: ASCEND COMMUNICATIONS INC.


 Home MIB: ASCEND-MIBETHER-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ASCEND-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mibethernetInterfaceProfile 1.3.6.1.4.1.529.23.76
       mibethernetInterfaceProfileTable 1.3.6.1.4.1.529.23.76.1 no-access
A list of mibethernetInterfaceProfile profile entries.
           mibethernetInterfaceProfileEntry 1.3.6.1.4.1.529.23.76.1.1 no-access
A mibethernetInterfaceProfile entry containing objects that maps to the parameters of mibethernetInterfaceProfile profile.
               ethernetInterfaceProfile_Shelf_o 1.3.6.1.4.1.529.23.76.1.1.1 integer read-only
               ethernetInterfaceProfile_Slot_o 1.3.6.1.4.1.529.23.76.1.1.2 integer read-only
               ethernetInterfaceProfile_Item_o 1.3.6.1.4.1.529.23.76.1.1.3 integer read-only
               ethernetInterfaceProfile_InterfaceAddress_Shelf 1.3.6.1.4.1.529.23.76.1.1.4 integer read-write
The number of the shelf that the addressed physical device resides on. Enumeration: 'anyShelf': 1, 'shelf2': 3, 'shelf3': 4, 'shelf1': 2, 'shelf6': 7, 'shelf7': 8, 'shelf4': 5, 'shelf5': 6, 'shelf8': 9, 'shelf9': 10.
               ethernetInterfaceProfile_InterfaceAddress_Slot 1.3.6.1.4.1.529.23.76.1.1.5 integer read-write
The number of the slot that the addressed physical device resides on. Enumeration: 'aLim': 55, 'bLim': 56, 'trunkModule2': 46, 'slot36': 37, 'firstControlModule': 53, 'trunkModule1': 45, 'rightController': 50, 'slot28': 29, 'slot29': 30, 'slot24': 25, 'slot25': 26, 'slot26': 27, 'slot27': 28, 'slot20': 21, 'slot21': 22, 'slot22': 23, 'slot23': 24, 'slotPrimary': 59, 'cLim': 57, 'slot40': 41, 'secondControlModule': 54, 'leftController': 49, 'slot39': 40, 'controlModule': 51, 'slot9': 10, 'slot8': 9, 'controller': 42, 'slot38': 39, 'slot1': 2, 'slot3': 4, 'slot2': 3, 'slot5': 6, 'slot4': 5, 'slot7': 8, 'slot6': 7, 'slot11': 12, 'slot10': 11, 'slot13': 14, 'slot12': 13, 'slot15': 16, 'slot14': 15, 'slot17': 18, 'slot16': 17, 'slot19': 20, 'slot18': 19, 'slot31': 32, 'slot30': 31, 'slot37': 38, 'anySlot': 1, 'slot35': 36, 'slot34': 35, 'slot33': 34, 'dLim': 58, 'slot32': 33.
               ethernetInterfaceProfile_InterfaceAddress_ItemNumber 1.3.6.1.4.1.529.23.76.1.1.6 integer read-write
A number that specifies an addressable entity within the context of shelf and slot.
               ethernetInterfaceProfile_LinkStateEnabled 1.3.6.1.4.1.529.23.76.1.1.7 integer read-write
TRUE if the link state is honored, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
               ethernetInterfaceProfile_Enabled 1.3.6.1.4.1.529.23.76.1.1.8 integer read-write
TRUE if the interface is enabled, otherwise FALSE. Enumeration: 'yes': 2, 'no': 1.
               ethernetInterfaceProfile_EtherIfType 1.3.6.1.4.1.529.23.76.1.1.9 integer read-only
The type of phyical interrface, UTP, COAX, AUI Enumeration: 'aui': 1, 'utp': 3, 'coax': 2.
               ethernetInterfaceProfile_Filter 1.3.6.1.4.1.529.23.76.1.1.10 integer read-write
This field is for non-tnt only
               ethernetInterfaceProfile_BridgingEnabled 1.3.6.1.4.1.529.23.76.1.1.11 integer read-write
TRUE if this interface is to support bridging. Enumeration: 'yes': 2, 'no': 1.
               ethernetInterfaceProfile_FilterName 1.3.6.1.4.1.529.23.76.1.1.12 displaystring read-write
The name of this filter. All filters are referenced by name so a name must be assigned to active filters.
               ethernetInterfaceProfile_DuplexMode 1.3.6.1.4.1.529.23.76.1.1.13 integer read-write
Set the 100BaseT physical interface to full or half duplex mode. Only valid for the 100BaseT port. Enumeration: 'fullDuplex': 1, 'halfDuplex': 2.
               ethernetInterfaceProfile_PppoeOptions_Pppoe 1.3.6.1.4.1.529.23.76.1.1.14 integer read-write
Enable or disable the ability to establish PPP over Ethernet session over this interface. Enumeration: 'yes': 2, 'no': 1.
               ethernetInterfaceProfile_PppoeOptions_BridgeNonPppoe 1.3.6.1.4.1.529.23.76.1.1.15 integer read-write
States wheather to bridge all other protocols except PPPoE on this interface or not. Enumeration: 'yes': 2, 'no': 1.
               ethernetInterfaceProfile_BridgingOptions_BridgingGroup 1.3.6.1.4.1.529.23.76.1.1.16 integer read-write
Select the bridging group for this connection. Group 0 disables bridging. All packets not routed will be bridged to interfaces belonging to the same group.
               ethernetInterfaceProfile_BridgingOptions_DialOnBroadcast 1.3.6.1.4.1.529.23.76.1.1.17 integer read-write
Enable/disable outdial when broadcast frames are received. Enumeration: 'yes': 2, 'no': 1.
               ethernetInterfaceProfile_BridgingOptions_IpxSpoofing 1.3.6.1.4.1.529.23.76.1.1.18 integer read-write
Selects the IPX spoofing mode when bridging. Enumeration: 'none': 1, 'clientSpoofing': 2, 'serverSpoofing': 3.
               ethernetInterfaceProfile_BridgingOptions_SpoofingTimeout 1.3.6.1.4.1.529.23.76.1.1.19 integer read-write
IPX NetWare connection timeout value.
               ethernetInterfaceProfile_BridgingOptions_Fill2 1.3.6.1.4.1.529.23.76.1.1.20 integer read-only
filler to get to 32 bit boundary
               ethernetInterfaceProfile_BridgingOptions_BridgeType 1.3.6.1.4.1.529.23.76.1.1.21 integer read-write
For the P25 user interface. Enumeration: 'noBridging': 3, 'ipxClientBridging': 2, 'transparentBridging': 1.
               ethernetInterfaceProfile_BridgingOptions_Egress 1.3.6.1.4.1.529.23.76.1.1.22 integer read-write
Enable/disable Egress on this interface. This interface will become the exit path for all packets destined to the network. Enumeration: 'yes': 2, 'no': 1.
               ethernetInterfaceProfile_MediaSpeedMbit 1.3.6.1.4.1.529.23.76.1.1.23 integer read-write
Set the BaseT physical interface media speed to 100mb or 10mb. Only valid for the BaseT port on an ether3-card. Enumeration: 'n-100mb': 2, 'n-10mb': 1.
               ethernetInterfaceProfile_AutoNegotiate 1.3.6.1.4.1.529.23.76.1.1.24 integer read-write
Set the auto-negotiation option. Only valid for enet3nd-card. Enumeration: 'yes': 2, 'no': 1.
               ethernetInterfaceProfile_Action_o 1.3.6.1.4.1.529.23.76.1.1.25 integer read-write
Enumeration: 'deleteProfile': 3, 'createProfile': 2, 'noAction': 1.